GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19845-2005 |
Mechanical vibration-Vibration testing requirements for shipboard equipment and machinery components 机械振动 船舶设备和机械部件的振动 试验要求 |
China National Standards an |
English PDF |
GB/T 19843-2005 |
Industrial fan-performance testing of jet fans 工业通风机 射流风机的性能试验 |
China National Standards an |
English PDF |
GB/T 1973.3-2005 |
Small cylindrically coiled compression spring—Dimensions and parameters 小型圆柱螺旋压缩弹簧尺寸及参数 |
China National Standards an |
English PDF |
GB/T 1973.2-2005 |
Small cylindrically coiled tension spring—Dimensions and parameters 小型圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards an |
English PDF |
GB/T 15187-2005 |
Measuring method for performances of wet dust collectors 湿式除尘器性能测定方法 |
China National Standards an |
English PDF |
GB/T 14043-2005 |
Hydraulic fluid power-Code for identification of valve mounting surfaces and cartridge valve cavities 液压传动 阀安装面和插装阀阀孔的标识代号 |
China National Standards an |
English PDF |
GB/T 12232-2005 |
General purpose industrial valves Flanged iron gate valves 通用阀门 法兰连接铁制闸阀 |
China National Standards an |
English PDF |
GB/T 10901-2005 |
Methods of Performance testing for centrifuge 离心机 性能测试方法 |
China National Standards an |
English PDF |
GB/T 19832-2005 |
Petroleum and natural gas industries-Drilling and production equipment-Inspection,maintenance,repair and remanufacture of hoisting equipment 石油天然气工业 钻井和采油提升设备的检验、维护、修理和改造 |
China National Standards an |
English PDF |
GB/T 19831.1-2005 |
Petroleum and natural gas industries-Casing centralizers-Part 1:Bow-spring casing centralizers 石油天然气工业 套管扶正器 第1部分 弓形弹簧套管扶正器 |
China National Standards an |
English PDF |
GB/T 19829.2-2005 |
Petroleum and natural gas industries-Life cycle costing-Part 2:Guidance on application of methodology and calculation methods 石油天然气工业 寿命周期费用分析 第2部分:方法论和计算方法应用指南 |
China National Standards an |
English PDF |
GB/T 19829.1-2005 |
Petroleum and natural gas industries-Life cycle costing-Part 1:Methodology 石油天然气工业 寿命周期费用分析 第1部分:方法论 |
China National Standards an |
English PDF |
GB/T 8753.4-2005 |
anodizing of aluminium and aluminium alloys-assessment of quality of sealed anodic oxide coatings Part 4:Dye spot test with prior acid treatment 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第4部分:酸处理后的染色斑点法 |
China National Standards an |
English PDF |
GB/T 8753.3-2005 |
anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 3:Admittance test 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第3部分:导纳法 |
China National Standards an |
English PDF |
GB/T 8753.2-2005 |
anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 2:Phosphoric acid/chromic acid test with nitric acid predip 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第2部分:硝酸预浸的磷铬酸法 |
China National Standards an |
English PDF |
GB/T 8753.1-2005 |
anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 1:Phosphoric acid/chromic acid test without nitric acid predip 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第1部分:无硝酸预浸的磷铬酸法 |
China National Standards an |
English PDF |
GB/T 8014.3-2005 |
anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method 铝及铝合金阳极氧化 氧化膜厚度的测量方法 第3部分:分光束显微镜法 |
China National Standards an |
English PDF |
GB/T 8014.2-2005 |
anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part2:Mass-loss method 铝及铝合金阳极氧化 氧化膜厚度的测量方法 第2部分:质量损失法 |
China National Standards an |
English PDF |
GB/T 8014.1-2005 |
anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle 铝及铝合金阳极氧化 氧化膜厚度的测量方法 第1部分:测量原则 |
China National Standards an |
English PDF |
GB/T 7998-2005 |
Test method for intergranular corrosion of aluminium alloy 铝合金晶间腐蚀测定方法 |
China National Standards an |
English PDF |
GB/T 7920.6-2005 |
Building construction machinery and equipment Piling equipment Terminology and commercial specifications 建筑施工机械与设备 打桩设备 术语和商业规格 |
China National Standards an |
English PDF |
GB/T 19827-2005 |
Technical product documentation-Protection notices for restricting the use of documents and products 技术产品文件 限制使用的文件和产品的保护注释 |
China National Standards an |
English PDF |
GB/T 17453-2005 |
Technical drawings-General principles of presentation-Part 50:Basic conventions for representing areas on cuts and sections 技术制图 图样画法 剖面区域的表示法 |
China National Standards an |
English PDF |
GB/T 14691.4-2005 |
Technical product documentation-Lettering-part4:Diacritical and particular marks for the Latin alphabet 技术产品文件 字体 第4部分:拉丁字母的表示区别与特殊标识 |
China National Standards an |
English PDF |
GB 7655.2-2005 |
Food additive Brilliant blue Aluminum lake 食品添加剂 亮蓝铝色淀 |
China National Standards an |
English PDF |
GB 7655.1-2005 |
Food additive Brilliant blue 食品添加剂 亮蓝 |
China National Standards an |
English PDF |
GB 4479.2-2005 |
Food additive Amaranth aluminum lake 食品添加剂 苋菜红铝色淀 |
China National Standards an |
English PDF |
GB 1894-2005 |
Food additive anhydrous sodium sulphite 食品添加剂 无水亚硫酸钠 |
China National Standards an |
English PDF |
GB/T 6463-2005 |
Metallic and other inorganic coatings-Review of methods of measurement of thickness 金属和其它无机覆盖层厚度测量方法评述 |
China National Standards an |
English PDF |
GB/T 6462-2005 |
Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method 金属和氧化物覆盖层 厚度测量 显微镜法 |
China National Standards an |
English PDF |
GB/T 5270-2005 |
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 |
China National Standards an |
English PDF |
GB/T 19822-2005 |
Specification for hard anodic oxidation coatings on aluminium and its alloys 铝及铝合金硬质阳极氧化膜规范 |
China National Standards an |
English PDF |
GB/T 12612-2005 |
General specification for multifunctional solution of iron and steel surface treatment 多功能钢铁表面处理液通用技术条件 |
China National Standards an |
English PDF |
GB/T 19818-2005 |
Seed Cotton Cleaner 籽棉清理机 |
China National Standards an |
English PDF |
GB/T 19812.2-2005 |
Plastic equipment for water saving irrigation-Pressure compensating emitter and emitting pipe 塑料节水灌溉器材 压力补偿式滴头及滴灌管 |
China National Standards an |
English PDF |
GB 5606.3-2005 |
Cigarettes--Technical Requirements for Packing,Making,Storage and Transport 卷烟 第3部分:包装、卷制技术要求及贮运 |
China National Standards an |
English PDF |
GB/T 19816.4-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 |
China National Standards an |
English PDF |
GB/T 19816.3-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 |
China National Standards an |
English PDF |
GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards an |
English PDF |
GB/T 19816.1-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 |
China National Standards an |
English PDF |
GB/T 8094-2005 |
Equipment for harvesting-Combine harvesters-Determination and designation of grain tank capacity and unloading device performance 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定 |
China National Standards an |
English PDF |
GB/T 6979.2-2005 |
Equipment for harvesting-Combines and functional components Part 2:Assessment of characteristics and performance defined in vocabulary 收获机械 联合收割机及功能部件 第2部分:在词汇中定义的性能和特征评价 |
China National Standards an |
English PDF |
GB/T 6979.1-2005 |
Equipment for harvesting-Combines and functional components Part 1:Vocabulary 收获机械 联合收割机及功能部件 第1部分:词汇 |
China National Standards an |
English PDF |
GB/T 5097-2005 |
Non-destructive testing-Penetrant testing and magnetic particle testing-Viewing conditions 无损检测 渗透检测和磁粉检测 观察条件 |
China National Standards an |
English PDF |
GB/T 19804-2005 |
Welding-General tolerances for welded constructions-Dimensions for lengths and angles-Shape and position 焊接结构的一般尺寸公差和形位公差 |
China National Standards an |
English PDF |
GB/T 19803-2005 |
Non-destructive testing-Radiographic image quality indicators-Principles and identification 无损检测 射线照相像质计 原则与标识 |
China National Standards an |
English PDF |
GB/T 19800-2005 |
Non-destructive testing-Acoustic emission inspection-Primary calibration of transducers 无损检测 声发射检测 换能器的一级校准 |
China National Standards an |
English PDF |
GB/T 19795.1-2005 |
Agricultural irrigation equipment-Rotating sprinklers-Part 1:Design and operational requirements 农业灌溉设备 旋转式喷头 第1部分:结构和运行要求 |
China National Standards an |
English PDF |
GB/T 19791-2005 |
The criterion Insect proof net design and its installation for greenhouse 温室防虫网设计安装规范 |
China National Standards an |
English PDF |
GB/T 18851.4-2005 |
Non-destructive testing-Penetrant testing-Part 4:Equipment 无损检测 渗透检测 第4部分:设备 |
China National Standards an |
English PDF |
GB/T 19783-2005 |
Chinese mitten-handed crab 中华绒螯蟹 |
China National Standards an |
English PDF |
GB 11779-2005 |
The minimum mesh size of the trawl cod-end in the East China Sea and Yellow Sea 东海、黄海区拖网网囊 最小网目尺寸 |
China National Standards an |
English PDF |
GB/T 19661.1-2005 |
Safety requirements for nuclear instrumentations and systems Part 1:General requirements 核仪器及系统安全要求 第1部分:通用要求 |
China National Standards an |
English PDF |
GB 17691-2005 |
Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V) 车用压燃式、气体燃料点燃式发动机与汽车排气污染物排放限值及测量方法(中国III、IV、V阶段) |
China National Standards an |
English PDF |
GB 19756-2005 |
Limits and measurement methods for exhaust pollutants from diesel engines of tr-wheel low-speed goods vehicles 三轮汽车和低速货车用柴油机排气污染物排放限值及测量方法(中国I、II阶段) |
China National Standards an |
English PDF |
GB 3847-2005 |
Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E. 车用压燃式发动机和压燃式发动机汽车排气烟度排放限值及测量方法 |
China National Standards an |
English PDF |
GB 19758-2005 |
Limits and measurement methods for exhaust smoke emissions from motorcycles and mopeds 摩托车和轻便摩托车排气烟度排放限值及测量方法 |
China National Standards an |
English PDF |
GB 19757-2005 |
Limits and measurement methods for noise emitted by accelerating tri-wheel and low-speed vehicle 三轮汽车和低速货车加速行驶车外噪声限值及测量方法(中国I、II阶段) |
China National Standards an |
English PDF |
GB 18285-2005 |
Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions 点燃式发动机汽车排气污染物排放限值及测量方法(双怠速法及简易工况法) |
China National Standards an |
English PDF |
GB/T 16264.8-2005 |
Information technology-Open Systems Interconnection-The Directory:Public-key and attribute certificate frameworks 信息技术 开放系统互连 目录 第8部分:公钥和属性证书框架 |
China National Standards an |
English PDF |
GB/T 4857.7-2005 |
Packaging-Basic tests for transport packages-Part 7:Sinusoidal vibration test method at constant frequency 包装 运输包装件基本试验 第7部分:正弦定频振动试验方法 |
China National Standards an |
English PDF |
GB/T 4857.2-2005 |
Packaging-Basic tests for transport packages-Part 2:Temperature and humidity conditioning 包装 运输包装件基本试验 第2部分:温湿度调节处理 |
China National Standards an |
English PDF |
GB/T 4857.13-2005 |
Packaging-Basic tests for transport packages-Part 13:Low pressure test 包装 运输包装件基本试验 第13部分:低气压试验方法 |
China National Standards an |
English PDF |
GB/T 4857.11-2005 |
Packaging-Basic tests for transport packages-Part 11:Horizontal impact test methods 包装 运输包装件基本试验 第11部分:水平冲击试验方法 |
China National Standards an |
English PDF |
GB/T 4857.10-2005 |
Packaging-Basic tests for transport packages-Part 10:Sinusoidal vibration test method using at variable vibration frequency 包装 运输包装件基本试验 第10部分:正弦变频振动试验方法 |
China National Standards an |
English PDF |
GB/T 19780-2005 |
Capacity calibration of spherical metal tank-Total station external measuring method 球形金属罐的容积标定 全站仪外测法 |
China National Standards an |
English PDF |
GB/T 19779-2005 |
Petroleum and liquid petroleum products-Calculation of oil quantities-Static measurement 石油和液体石油产品油量计算 静态计量 |
China National Standards an |
English PDF |
GB/T 19772-2005 |
The reuse of urban recycling water Water quality standard for groundwater recharge 城市污水再生利用 地下水回灌水质 |
China National Standards an |
English PDF |
GB/T 19789-2005 |
Packaging Material Standard Test Method for Oxygen Gas Permeability Characteristics of Plastic Film and Sheeting Using a Coulometric Sensor 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法 |
China National Standards an |
English PDF |
GB/T 16811-2005 |
Running result and the monitoring and testing for industrial boilers water-treatment equipment 工业锅炉水处理设施运行效果与监测 |
China National Standards an |
English PDF |
GB/T 11081-2005 |
Standard Test Method for Ultraviolet Adsorption of White Oils 白油紫外吸光度测定法 |
China National Standards an |
English PDF |
GB/T 10411-2005 |
D.C.traction power supply system for urban rail transit 城市轨道交通直流牵引供电系统 |
China National Standards an |
English PDF |
GB 19778-2005 |
Packaging glass containers-Release of lead cadmium arsenic and antimony-Permissible limits 包装玻璃容器 铅、镉、砷、锑 溶出允许限量 |
China National Standards an |
English PDF |
GB/T 19752-2005 |
Hybrid electric vehicles-Power performance-Test method 混合动力电动汽车 动力性能 试验方法 |
China National Standards an |
English PDF |
GB/T 19770-2005 |
Cinematography-Viewing conditions for the evaluation of films and slides for television-Colours,luminances and dimensions 电影 评价电视用电影和幻灯的观看条件 彩色、亮度和尺寸 |
China National Standards an |
English PDF |
GB/T 9979-2005 |
Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures 纤维增强塑料高低温力学性能 试验准则 |
China National Standards an |
English PDF |
GB/T 9217.9-2005 |
Hardmetal burrs--Part 9:60°and 90°cone burrs(styles J and K) 硬质合金旋转锉 第9部分:60°和90°圆锥形旋转锉(J型和K型) |
China National Standards an |
English PDF |
GB/T 6058-2005 |
Test method for preparation and internal pressure testing of filament-wound pressure vessels 纤维缠绕压力容器制备和内压试验方法 |
China National Standards an |
English PDF |
GB/T 6011-2005 |
Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method 纤维增强塑料燃烧性能试验方法 炽热棒法 |
China National Standards an |
English PDF |
GB/T 3857-2005 |
Test method for chemical resistance of glass fiber reinforced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 |
China National Standards an |
English PDF |
GB/T 3854-2005 |
Test method for hardness of reinforced plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 |
China National Standards an |
English PDF |
GB/T 3140-2005 |
Fiber-reinforced plastics composites-Determination of mean specific heat capacity 纤维增强塑料平均比热容试验方法 |
China National Standards an |
English PDF |
GB/T 2572-2005 |
Fiber-reiforced plastics composites-Determination for mean coefficient of linear expansion 纤维增强塑料平均线膨胀系数试验方法 |
China National Standards an |
English PDF |
GB/T 19769.2-2005 |
Function Blocks for industrial-process measurement and control system--Part2:Software tools requirements 工业过程测量和控制系统用功能块 第2部分:软件工具要求 |
China National Standards an |
English PDF |
GB/T 19769.1-2005 |
Function Blocks for industrial-process measurement and control system--Part1:Architecture 工业过程测量和控制系统用功能块 第1部分:结构 |
China National Standards an |
English PDF |
GB/T 19768-2005 |
Expression of performance of sample handling systems for process analyzers 过程分析器试样处理系统性能表示 |
China National Standards an |
English PDF |
GB/T 1464-2005 |
Test method for density of sandwich construction or cores 夹层结构或芯子密度试验方法 |
China National Standards an |
English PDF |
GB/T 1463-2005 |
Test methods for density and relative density of fiber reinforced plastics 纤维增强塑料密度和相对密度试验方法 |
China National Standards an |
English PDF |
GB/T 1457-2005 |
Test method for climbing drum peel strength of sandwich constructions 夹层结构滚筒剥离强度试验方法 |
China National Standards an |
English PDF |
GB/T 1456-2005 |
Test method for flexural properties of sandwich constructions 夹层结构弯曲性能试验方法 |
China National Standards an |
English PDF |
GB/T 1455-2005 |
Test method for shear properties of sandwich constructions or cores 夹层结构或芯子剪切性能试验方法 |
China National Standards an |
English PDF |
GB/T 1454-2005 |
Test method for edgewise compressive properties of sandwich constructions 夹层结构侧压性能试验方法 |
China National Standards an |
English PDF |
GB/T 1453-2005 |
Test method for flatwise compression properties of sandwich constructions or cores 夹层结构或芯子平压性能试验方法 |
China National Standards an |
English PDF |
GB/T 1452-2005 |
Test method for flatwise tension strength of sandwich constructions 夹层结构平拉强度试验方法 |
China National Standards an |
English PDF |
GB/T 13163.2-2005 |
Radiation protection instrumentation-Radon and radon decay product measuring instruments-Part2:Specific requirements for radon measruing instruments 辐射防护用氡及氡子体测量仪 第2部分:氡测量仪的特殊要求 |
China National Standards an |
English PDF |
GB/T 10248-2005 |
Gas analysis-Preparation of calibration gas mixtures-Static volumetric methods 气体分析 校准用混合气体的制备 静态体积法 |
China National Standards an |
English PDF |
GB/T 3667.1-2005 |
AC motor capacitors-Part 1:General-Performance,testing and rating-Safety requirements-Guide for installation and operation 交流电动机电容器 第1部分:总则--性能、试验和定额--安全要求--安装和运行导则 |
China National Standards an |
English PDF |
GB/T 19749-2005 |
Coupling capacitors and capacitor dividers 耦合电容器及电容分压器 |
China National Standards an |
English PDF |
GB/T 2822-2005 |
Standard linear dimensions 标准尺寸 |
China National Standards an |
English PDF |
GB/T 19765-2005 |
Geometrical Product Specifications(GPS)-Standard reference temperature for geometrical product specification and verification 产品几何量技术规范(GPS)--产品几何量技术规范和检验的标准参考温度 |
China National Standards an |
English PDF |
Find out:33350Items | To Page of: First -Previous-Next -Last | [279] [280] [281] [282] [283] [284] [285] |