GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 41163-2021 |
Specification for process design of enhancing coal seam permeability by water jet in coalmine 煤矿井下煤层水射流冲击增透工艺设计规范 |
China National Standards an |
English PDF |
GB/T 41044-2021 |
Guidelines for coalbed methane extraction in coal mining areas 煤矿区煤层气抽采指南 |
China National Standards an |
English PDF |
GB/T 21636-2021 |
Microbeam analysis—Electron probe microanalysis (EPMA)—Vocabulary 微束分析 电子探针显微分析(EPMA) 术语 |
China National Standards an |
English PDF |
GB/T 41074-2021 |
Microbeam analysis -- Method of specimen preparation for analysis of general powders using WDS and EDS 微束分析 用于波谱和能谱分析的粉末试样制备方法 |
China National Standards an |
English PDF |
GB/T 15579.14-2021 |
Arc welding equipment -- Part 14: Calibration, validation and consistency testing 弧焊设备 第14部分:校准、确认和一致性试验 |
China National Standards an |
English PDF |
GB/T 21419-2021 |
Transformers, power supplies, reactors and similar products—EMC requirements 变压器、电源装置、电抗器及其类似产品 电磁兼容(EMC)要求 |
China National Standards an |
English PDF |
GB/T 41042-2021 |
Guidance for utilization and classification of content of valuable elements in coal 煤中有价元素含量分级及应用导则 |
China National Standards an |
English PDF |
GB/T 41043-2021 |
Coordinative development effectiveness evaluation indicator and method of coal and coalbed methane 煤与煤层气协调开发效果评价指标及计算方法 |
China National Standards an |
English PDF |
GB/T 3099.4-2021 |
Terminology of fasteners—Control, inspection, delivery, acceptance and quality 紧固件术语 控制、检查、交付、接收和质量 |
China National Standards an |
English PDF |
GB/T 3098.26-2021 |
Mechanical properties of fasteners—Flat washers 紧固件机械性能 平垫圈 |
China National Standards an |
English PDF |
GB/T 41116-2021 |
Non-destructive testing of welds—Time-of-flight diffraction technique (TOFD)—Acceptance levels 焊缝无损检测 衍射时差技术(TOFD) 验收等级 |
China National Standards an |
English PDF |
GB/T 26282-2021 |
Measuring methods of heat balance of cement rotary kiln 水泥回转窑热平衡测定方法 |
China National Standards an |
English PDF |
GB/T 20303.5-2021 |
Cranes—Cabins and control stations—Part 5: Overhead travelling and portal bridge cranes 起重机 司机室和控制站 第5 部分:桥式和门式起重机 |
China National Standards an |
English PDF |
GB/T 17743-2021 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰特性的限值和测量方法 |
China National Standards an |
English PDF |
GB/T 4657-2021 |
Codes for the central party and state organs people’s communities and the other state organizations 中央党政机关、人民团体及其他机构代码 |
China National Standards an |
English PDF |
GB/T 8563.1-2021 |
Classification and codes for information of reward and disciplinary action -- Part 1: Codes of medal, honorary title and reward 奖励、纪律处分信息分类与代码 第1部分:勋章、荣誉称号和表彰奖励代码 |
China National Standards an |
English PDF |
GB/T 30887-2021 |
Technical guide for water system integration and optimization of industrial enterprises 工业企业水系统集成优化技术指南 |
China National Standards an |
English PDF |
GB/T 13976-2021 |
Radioactive source term of pressurized water reactor nuclear power plant for operation states 压水堆核电厂运行状态下的放射性源项 |
China National Standards an |
English PDF |
GB/T 41249-2021 |
Industrial assistance—Guidance for operation management of “pig-biogas-fruit (grain and vegetable)”circular agricultural project 产业帮扶 “猪-沼-果(粮、菜)” 循环农业项目运营管理指南 |
China National Standards an |
English PDF |
GB/T 21938-2021 |
Earth-moving machinery─Hydraulic excavator and backhoe loader lowering control device─Requirements and tests 土方机械 液压挖掘机和挖掘装载机下降控制装置 要求和试验 |
China National Standards an |
English PDF |
GB/T 22565.1-2021 |
Metallic materials -- Sheet and strip -- Method for spring back evaluation -- Part 1: Stretch bending 金属材料 薄板和薄带 回弹性能评估方法 第1部分:拉弯法 |
China National Standards an |
English PDF |
GB/T 5121.28-2021 |
Methods for chemical analysis of copper and copper alloys—Part 28:Determination of chromium,iron,manganese,cobalt,nickel,zinc,arsenic,selenium,silver,cadmium,tin,antimony,tellurium,lead and bismuth content—Inductively coupled plasma-mass spectrometry 铜及铜合金化学分析方法 第28部分:铬、铁、锰、钴、镍、锌、砷、硒、银、镉、锡、锑、碲、铅和铋含量的测定 电感耦合等离子体质谱法 |
China National Standards an |
English PDF |
GB/T 7991.1-2021 |
Test method of viterous and porcelain enamels—Part 1:Determination of resistance to alkaline liquids 搪玻璃层试验方法 第1部分:耐碱性溶液腐蚀性能的测定 |
China National Standards an |
English PDF |
GB/T 41073-2021 |
Surface chemical analysis -- Electron spectroscopies -- Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy 表面化学分析 电子能谱 X射线光电子能谱峰拟合报告的基本要求 |
China National Standards an |
English PDF |
GB/T 6113.104-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4:Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分:无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地 |
China National Standards an |
English PDF |
GB/T 6113.101-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1: Radio disturbance and immunity measuring apparatus—Measuring apparatus 无线电骚扰和抗扰度测量设备和测量方法规范 第1-1部分:无线电骚扰和抗扰度测量设备 测量设备 |
China National Standards an |
English PDF |
GB/T 41039-2021 |
The general rules of determing designed coal and checked coal in modern coal chemical technology 现代煤化工项目设计煤种和校核煤种确定通则 |
China National Standards an |
English PDF |
GB/T 2384-2021 |
Dyes intermediates—General method for the determination of melting range 染料中间体 熔点范围测定通用方法 |
China National Standards an |
English PDF |
GB/T 14598.118-2021 |
Measuring relays and protection equipment -- Part 118: Synchrophasor for power systems -- Measurements 量度继电器和保护装置 第118部分:电力系统同步相量 测量 |
China National Standards an |
English PDF |
GB/T 41164-2021 |
Specifications technology for multistage fracturing in horizontal well within roof of broken-soft and low permeability coal seam 碎软低渗煤层顶板水平井分段压裂技术规范 |
China National Standards an |
English PDF |
GB/T 41138-2021 |
Product quality information system -- Information classification, sharing and exchange 产品质量信息系统 信息分类与共享交换 |
China National Standards an |
English PDF |
GB/T 10892-2021 |
Stationary air compressors -- Safety rules and code of practice 固定的空气压缩机 安全规则和操作规程 |
China National Standards an |
English PDF |
GB/T 41108.3-2021 |
Safety of machinery -- Safety requirements for interlocking devices -- Part 3: Trapped key interlocking devices and systems 机械安全 联锁装置的安全要求 第3部分:截留钥匙联锁装置及系统 |
China National Standards an |
English PDF |
GB/T 14598.181-2021 |
Measuring relays and protection equipment -- Part 181:Functional requirements for frequency protection 量度继电器和保护装置 第181 部分:频率保护功能要求 |
China National Standards an |
English PDF |
GB/T 26281-2021 |
Methods for the calculation of heat balance,heat efficiency and comprehensive energy consumption of cement rotary kiln 水泥回转窑热平衡、热效率、综合能耗计算方法 |
China National Standards an |
English PDF |
GB/T 3670-2021 |
Covered electordes for manual metal arc welding of copper and copper alloys 铜及铜合金焊条 |
China National Standards an |
English PDF |
GB/T 41111-2021 |
Rods for gas welding of non-alloy and creep-resisting steels 气焊用非合金钢及热强钢填充丝 |
China National Standards an |
English PDF |
GB/T 41110-2021 |
Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys 镍及镍合金药芯焊丝 |
China National Standards an |
English PDF |
GB/T 41112-2021 |
Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys 镁及镁合金焊丝 |
China National Standards an |
English PDF |
GB/T 26465-2021 |
Safety rules for the construction and installation of firefighters lifts 消防员电梯制造与安装安全规范 |
China National Standards an |
English PDF |
GB/T 41123.2-2021 |
Non-destructive testing—Radiation methods for industrial computed tomography—Part 2:Operation and interpretation 无损检测 工业射线计算机层析成像检测 第2部分:操作和解释 |
China National Standards an |
English PDF |
GB/T 41123.1-2021 |
Non-destructive testing -- Radiation methods for industrial computed tomography -- Part 1: Principles, equipment and samples 无损检测 工业射线计算机层析成像检测 第1部分:原理、设备和样品 |
China National Standards an |
English PDF |
GB/T 41105.3-2021 |
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method 无损检测? X射线管电压的测量和评价 第3部分:能谱法 |
China National Standards an |
English PDF |
GB/T 41105.2-2021 |
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 2: Constancy check by the thick filter method 无损检测? X射线管电压的测量和评价 第2部分:厚板滤波法稳定性核查 |
China National Standards an |
English PDF |
GB/T 15829-2021 |
Soft soldering flux -- Classification and requirements 软钎剂 分类与性能要求 |
China National Standards an |
English PDF |
GB/T 41113-2021 |
Qualification testing of brazers and brazing operators 硬钎焊工和硬钎焊操作工技能评定 |
China National Standards an |
English PDF |
GB/T 41104.3-2021 |
Solder wire, solid and flux cored -- Specifications and test methods -- Part 3: Wetting balance test method for flux cored solder wire efficacy 实心和药芯软钎料丝? 规范和试验方法? 第3部分:药芯软钎料丝功效的润湿平衡试验方法 |
China National Standards an |
English PDF |
GB/T 41104.2-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content 实心和药芯软钎料丝? 规范和试验方法? 第2部分:钎剂含量的测定 |
China National Standards an |
English PDF |
GB/T 41104.1-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 1: Classification and performance requirements 实心和药芯软钎料丝? 规范和试验方法? 第1部分:分类和性能要求 |
China National Standards an |
English PDF |
GB/T 41158-2021 |
Management requirements for circulation information of automobile aftermarket parts 汽车后市场配件流通信息管理要求 |
China National Standards an |
English PDF |
GB/T 22437.5-2021 |
Cranes—Design principles for loads and load combinations—Part 5:Overhead travelling and portal bridge cranes 起重机 载荷与载荷组合的设计原则 第5部分:桥式和门式起重机 |
China National Standards an |
English PDF |
GB/T 41105.1-2021 |
Non-destructive testing—Measurement and evaluation of the X-ray tube voltage—Part 1:Voltage divider method 无损检测 X射线管电压的测量和评价 第1部分:分压法 |
China National Standards an |
English PDF |
GB/T 8593.2-2021 |
Earth-moving machinery—Symbols for operator controls and other displays—Part 2:Symbols for specific machines,equipment and accessories 土方机械 司机操纵装置和其他显示装置用符号 第2部分:机器、工作装置和附件的特殊符号 |
China National Standards an |
English PDF |
GB/T 8593.1-2021 |
Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols 土方机械? 司机操纵装置和其他显示装置用符号? 第1部分:通用符号 |
China National Standards an |
English PDF |
GB/T 29004-2021 |
Rice transplanter -- Evaluation index and measurement methods for fuel consumption 水稻插秧机 燃油消耗量指标及测量方法 |
China National Standards an |
English PDF |
GB/T 24818.2-2021 |
Cranes—Access, guards and restraints—Part 2: Mobile cranes 起重机 通道及安全防护设施 第2部分:流动式起重机 |
China National Standards an |
English PDF |
GB/T 20303.2-2021 |
Cranes—Cabins and control stations—Part 2:Mobile cranes 起重机 司机室和控制站 第2部分:流动式起重机 |
China National Standards an |
English PDF |
GB/T 8100.3-2021 |
Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves 液压阀安装面 第3部分:减压阀、顺序阀、卸荷阀、节流阀和单向阀 |
China National Standards an |
English PDF |
GB/T 41098-2021 |
Cranes -- Safety -- Load lifting attachments 起重机? 安全? 起重吊具 |
China National Standards an |
English PDF |
GB/T 41176-2021 |
Professional sportswear -- Ski and snowboard wear 专业运动服装? 滑雪服 |
China National Standards an |
English PDF |
GB/T 24604-2021 |
Rolling bearings-angular contact thrust ball bearings and units for machine tool screws 滚动轴承 机床丝杠用推力角接触球轴承及单元 |
China National Standards an |
English PDF |
GB/T 6445-2021 |
Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 滚轮滚针轴承 外形尺寸、产品几何技术规范(GPS)和公差值 |
China National Standards an |
English PDF |
GB/T 26473-2021 |
Cranes—Safety requirements for loader cranes 起重机 随车起重机安全要求 |
China National Standards an |
English PDF |
GB/T 38055.5-2021 |
Rough-terrain trucks—User requirements—Part 5: Interface between variable-reach truck and intergrated personnel work platform 越野叉车 对用户的要求 第5部分:伸缩臂式叉车和集成式人员工作平台的连接装置 |
China National Standards an |
English PDF |
GB/T 38055.4-2021 |
Rough-terrain trucks—User requirements—Part 4: Additional requirements for variable-reach trucks handling freely suspended loads 越野叉车 对用户的要求 第4部分:悬吊可自由摆动载荷伸缩臂式叉车的附加要求 |
China National Standards an |
English PDF |
GB/T 26949.12-2021 |
Industrial trucks—Verification of stability—Part 12:Industrial variable-reach trucks handling freight containers of 6 m length and longer 工业车辆 稳定性验证 第12部分:搬运6 m及其以上长度货运集装箱的伸缩臂式叉车 |
China National Standards an |
English PDF |
GB/T 41135.2-2021 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes -- Part 2: System aspects 故障路径指示用电流和电压传感器或探测器?? 第2部分:系统应用 |
China National Standards an |
English PDF |
GB/T 41135.1-2021 |
Current and voltage sensors or detectors, to be used for fault passage indication purposes -- Part 1: General principles and requirements 故障路径指示用电流和电压传感器或探测器?? 第1部分:通用原理和要求 |
China National Standards an |
English PDF |
GB/T 41106.6-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 6: Sort of virtual experience rides 大型游乐设施 检查、维护保养与修理 第6部分:虚拟体验类 |
China National Standards an |
English PDF |
GB/T 41106.5-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 5: Sort of aquatic rides 大型游乐设施 检查、维护保养与修理 第5部分:水上类 |
China National Standards an |
English PDF |
GB/T 41106.4-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 4: Sort of lifting rides 大型游乐设施 检查、维护保养与修理 第4部分:升降类 |
China National Standards an |
English PDF |
GB/T 41106.3-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 3: Sort of rotary rides 大型游乐设施 检查、维护保养与修理 第3部分:旋转类 |
China National Standards an |
English PDF |
GB/T 41106.2-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 2: Sort of track rides 大型游乐设施 检查、维护保养与修理 第2部分:轨道类 |
China National Standards an |
English PDF |
GB/T 41106.1-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 1: General 大型游乐设施 检查、维护保养与修理 第1部分:总则 |
China National Standards an |
English PDF |
GB/T 26301-2021 |
Copper-nickel-zinc alloy strips and foils for shield 屏蔽用锌白铜带箔材 |
China National Standards an |
English PDF |
GB/T 26024-2021 |
Seamless copper and copper alloys tube for valves on air-conditioning and refrigeration system 空调与制冷系统阀件用铜及铜合金无缝管 |
China National Standards an |
English PDF |
GB/T 24807-2021 |
Electromagnetic compatibility for lifts, escalators and moving walks—Emission 电梯、自动扶梯和自动人行道的电磁兼容 发射 |
China National Standards an |
English PDF |
GB/T 26557-2021 |
Builders hoists for persons and materials with vertically guided cages 吊笼有垂直导向的人货两用施工升降机 |
China National Standards an |
English PDF |
GB/T 41130-2021 |
Basic requirements for safety management of exhibition venue 展览场馆安全管理基本要求 |
China National Standards an |
English PDF |
GB/T 41139-2021 |
Requirements of standard conformance testing for information classification coding and metadata 信息分类编码及元数据标准符合性测试要求 |
China National Standards an |
English PDF |
GB/T 10762-2021 |
Method of mass measurements for industrial and mining electric locomotive 工矿电机车质量测量方法 |
China National Standards an |
English PDF |
GB/T 41225-2021 |
Limit and determination of free phenols in phenoxy carboxylic acid herbicides 苯氧羧酸类除草剂中游离酚限量及检测方法 |
China National Standards an |
English PDF |
GB/T 41101.2-2021 |
Earth-moving machinery -- Sustainability -- Part 2: Remanufacturing 土方机械? 可持续性? 第2部分:再制造 |
China National Standards an |
English PDF |
GB/T 25684.11-2021 |
Earth-moving machinery—Safety—Part 11: Requirements for landfill compactors 土方机械 安全 第11部分:回填压实机的要求 |
China National Standards an |
English PDF |
GB/T 41174-2021 |
Professional sportswear -- Track and field garment 专业运动服装? 田径服 |
China National Standards an |
English PDF |
GB/T 7991.3-2021 |
Test method of viterous and porcelain enamels -- Part 3: Determination of resistance to thermal shock 搪玻璃层试验方法 第3部分:耐温差急变性能的测定 |
China National Standards an |
English PDF |
GB/T 20724-2021 |
Microbeam analysis—Method of thickness measurement for thin crystals by convergent beam electron diffraction 微束分析 薄晶体厚度的会聚束电子衍射测定方法 |
China National Standards an |
English PDF |
GB/T 41076-2021 |
Microbeam analysis—Electron backscatter diffraction—Quantitative determination of austenite in steel 微束分析 电子背散射衍射 钢中奥氏体的定量分析 |
China National Standards an |
English PDF |
GB/T 29732-2021 |
Surface chemical analysis—Medium resolution auger electron spectrometers—Calibration of energy scales for elemental analysis 表面化学分析 中等分辨俄歇电子能谱仪 元素分析用能量标校准 |
China National Standards an |
English PDF |
GB/T 41207-2021 |
Information and documentation -- Management systems for records -- Guidelines for implementation 信息与文献 文件(档案)管理体系 实施指南 |
China National Standards an |
English PDF |
GB/T 41136-2021 |
Resistance welding equipment -- Transformers -- Integrated transformer-rectifier units for welding guns operating at 1 000 Hz 电阻焊设备 变压器 一体式焊钳用内置整流器的1000Hz变压器 |
China National Standards an |
English PDF |
GB/T 10827.2-2021 |
Industrial trucks -- Safety requirements and verification -- Part 2: Self-propelled variable-reach trucks 工业车辆? 安全要求和验证? 第2部分:自行式伸缩臂式叉车 |
China National Standards an |
English PDF |
GB/T 41028-2021 |
Requirements of aerospace fluid systems impulse testing of hydraulic hose ,tubing and fitting assemblies 航空航天流体系统液压软管、管道和接头组件的脉冲试验要求 |
China National Standards an |
English PDF |
GB/T 41031-2021 |
Liquefied coalbed methane 液化煤层气 |
China National Standards an |
English PDF |
GB/T 41089-2021 |
Technical specification for isolated lightning protection of electronic system based on lightning nowcasting and warning 基于雷电临近预警的电子系统隔离防雷技术规范 |
China National Standards an |
English PDF |
GB/T 41064-2021 |
Surface chemical analysis—Depth profiling—Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films 表面化学分析 深度剖析 用单层和多层薄膜测定X射线光电子能谱、俄歇电子能谱和二次离子质谱中深度剖析溅射速率的方法 |
China National Standards an |
English PDF |
GB/T 6476-2021 |
Surface grinding machines with vertical grinding wheel spindle and reciprocating table—Testing of the accuracy 立轴矩台平面磨床 精度检验 |
China National Standards an |
English PDF |
GB/T 41041-2021 |
Control requirements of forbidden and restricted components for space applications 宇航禁限用元器件控制要求 |
China National Standards an |
English PDF |
GB/T 41037-2021 |
Assurance requirements for system in package for space applications 宇航用系统级封装(SiP)保证要求 |
China National Standards an |
English PDF |
GB/T 41040-2021 |
COTS semiconductor parts for space application -- Quality assurance requirements 宇航用商业现货(COTS)半导体器件 质量保证要求 |
China National Standards an |
English PDF |
Find out:33350Items | To Page of: First -Previous-Next -Last | [37] [38] [39] [40] [41] [42] [43] |