GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/Z 22200-2008 |
Reliability test method for lower capacity alternating current contactors 小容量交流接触器可靠性试验方法 |
China National Standards capacity |
English PDF |
GB/T 8144-2008 |
Determination of exchange capacity of cation exchange resin 阳离子交换树脂交换容量测定方法 |
China National Standards capacity |
English PDF |
GB/T 5757-2008 |
Determination of moisture holding capacity of ion exchange resins 离子交换树脂含水量测定方法 |
China National Standards capacity |
English PDF |
GB/T 11847-2008 |
Determination of specific surface area of uranium dioxide powder by BET capacity method 二氧化铀粉末比表面积测定 BET容量法 |
China National Standards capacity |
English PDF |
GB/T 14797.3-2008 |
Natural rubber latex concentrate - Prevulcanized rubber latex - Determination of swelling capacity 浓缩天然胶乳 硫化胶乳 溶胀度的测定 |
China National Standards capacity |
English PDF |
GB/T 2979-2008 |
Size desination,dimensions,inflation pressure and load capacity for agricultural tyres 农业轮胎规格、尺寸、气压与负荷 |
China National Standards capacity |
English PDF |
GB/T 2977-2008 |
Size designation,dimensions,inflation pressure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards capacity |
English PDF |
GB/T 21663-2008 |
Specific requirements for small capacity cylindrical rotor synchronous machines in energy save and environment protection projects 小容量节能环保隐极同步发电机技术要求 |
China National Standards capacity |
English PDF |
GB/T 21458-2008 |
Mobile cranes - Presentation of rated capacity charts 流动式起重机 额定起重量图表 |
China National Standards capacity |
English PDF |
GB/T 3214-2007 |
Methods for measurement of capacity of pump 水泵流量的测定方法 |
China National Standards capacity |
English PDF |
GB/T 8243.12-2007 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量 |
China National Standards capacity |
English PDF |
GB/T 20858-2007 |
Glass containers - Determination of capacity by gravimetric method - Test method 玻璃容器 用重量法测定容量的试验方法 |
China National Standards capacity |
English PDF |
GB/T 13665-2007 |
Test method for damping capacity of metallic damping materials - Torsion pendulum method and Bending vibration 金属阻尼材料阻尼本领试验方法 扭摆法和弯曲振动法 |
China National Standards capacity |
English PDF |
GB/T 20449-2006 |
Test method for butane work capacity of activated carbon 活性炭丁烷工作容量测试方法 |
China National Standards capacity |
English PDF |
GB/T 20405.5-2006 |
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率 |
China National Standards capacity |
English PDF |
GB/T 3871.4-2006 |
Agricultural tractors - Test procedures - Part 4: Rear three-point linkage lifting capacity 农业拖拉机 试验规程 第4部分:后置三点悬挂装置提升能力 |
China National Standards capacity |
English PDF |
GB/T 19969-2005 |
Information technology -- 130 mm optical disk cartridges for information interchange -- capacity : 2.6 Gbytes per cartridge 信息技术 信息交换用130mm盒式光盘 容量:每盒2.6G字节 |
China National Standards capacity |
English PDF |
GB/T 19936.1-2005 |
Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分:油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards capacity |
English PDF |
GB/T 19928-2005 |
Earth-moving machinery-Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom 土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量 |
China National Standards capacity |
English PDF |
GB/T 17213.9-2005 |
Industrial-process control valves Part 2-3:Flow capacity-Test procedures 工业过程控制阀 第2-3部分:流通能力 试验程序 |
China National Standards capacity |
English PDF |
GB/T 17213.2-2005 |
Industrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的计算公式 |
China National Standards capacity |
English PDF |
GB/T 17213.10-2005 |
Industrial-process control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比 |
China National Standards capacity |
English PDF |
GB/T 19861-2005 |
Determination for strong-base group,weak-base group and weak-acid group exchange capacity of acrylic type anion exchange resins 丙烯酸系阴离子交换树脂强碱基团、弱碱基团和弱酸基团交换容量测定方法 |
China National Standards capacity |
English PDF |
GB/T 8094-2005 |
Equipment for harvesting-Combine harvesters-Determination and designation of grain tank capacity and unloading device performance 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定 |
China National Standards capacity |
English PDF |
GB/T 19780-2005 |
capacity calibration of spherical metal tank-Total station external measuring method 球形金属罐的容积标定 全站仪外测法 |
China National Standards capacity |
English PDF |
GB/T 3140-2005 |
Fiber-reinforced plastics composites-Determination of mean specific heat capacity 纤维增强塑料平均比热容试验方法 |
China National Standards capacity |
English PDF |
GB/Z 6413.2-2003 |
Calculation of scuffing load capacity of cylindrical,bevel and hypoid gears--Part 2:Integral temperature method 圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第2部分:积分温度法 |
China National Standards capacity |
English PDF |
GB/Z 6413.1-2003 |
Calculation of scuffing load capacity of cylindrical,bevel and hypoid gears--Part 1:Flash temperature method 圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第1部分:闪温法 |
China National Standards capacity |
English PDF |
GB/T 19406-2003 |
Calculation methods of load capacity for involute cylindrical spur and helical gears--Application for industrical gears 渐开线直齿和斜齿圆柱齿轮承载能力计算方法 工业齿轮应用 |
China National Standards capacity |
English PDF |
GB/T 10062.3-2003 |
Calculation of load capacity of bevel gear--Part 3:Calculation of tooth root strength 锥齿轮承载能力计算方法 第3部分:齿根弯曲强度计算 |
China National Standards capacity |
English PDF |
GB/T 10062.2-2003 |
Calculation of load capacity of bevel gear--Part 2:Calculation of surface durability(pitting) 锥齿轮承载能力计算方法 第2部分:齿面接触疲劳(点蚀)强度计算 |
China National Standards capacity |
English PDF |
GB/T 10062.1-2003 |
Calculation of load capacity of bevel gear--Part 1:Introduction and general influence factors 锥齿轮承载能力计算方法 第1部分:概述和通用影响系数 |
China National Standards capacity |
English PDF |
GB/T 19315-2003 |
Small craft--Maximum load capacity 小艇 最大装载量 |
China National Standards capacity |
English PDF |
GB/T 17680.9-2003 |
Criteria for emergency planning and preparedness for nuclear power plants--Maintenance of on-site emergency response capacity 核电厂应急计划与准备准则 场内应急响应能力的保持 |
China National Standards capacity |
English PDF |
GB/T 18807-2002 |
Information technology--Data interchange on 130 mm optical disk cartridges--capacity:1.3 gigabytes per cartridge 信息技术 130 mm盒式光盘上的数据交换容量:每盒1.3 G字节 |
China National Standards capacity |
English PDF |
GB/T 18678-2002 |
Equipment for crop protection--Agriculture spray--Nominal capacity of spray tank and diameter of filling 植物保护机械 农业喷雾机(器)药液箱额定容量和加液孔直径 |
China National Standards capacity |
English PDF |
GB/T 18140-2000 |
Information technology--Data interchange on 130 mm optical disk cartridges--capacity:1 gigabyte per cartridge 信息技术 130 mm盒式光盘上的数据交换 容量:每盒1 G字节 |
China National Standards capacity |
English PDF |
GB/T 5760-2000 |
Determination for exchange capacity of anion exchange resins in hydroxylic form 氢氧型阴离子交换树脂交换容量测定方法 |
China National Standards capacity |
English PDF |
GB/T 5759-2000 |
Determination for water retention capacity of anion exchange resins in hydroxylic form 氢氧型阴离子交换树脂含水量测定方法 |
China National Standards capacity |
English PDF |
GB/T 13621-1999 |
capacity series and radio-frequency channel arrangement and equipment main technical specifications for 100~1000 MHz radio relay communication systems 100~1000 MHz接力通信系统的容量系列波道配置及设备的主要技术要求 |
China National Standards capacity |
English PDF |
GB/T 17855-1999 |
Calculation of load capacity of spline 花键承载能力计算方法 |
China National Standards capacity |
English PDF |
GB/T 17660-1999 |
Method for determination of the buffering capacity of wood 木材缓冲容量测定方法 |
China National Standards capacity |
English PDF |
GB/T 17633-1998 |
Geotextiles and geotextile-related products--Determination of water flow capacity in their plane 土工布及其有关产品 平面内水流量的测定 |
China National Standards capacity |
English PDF |
GB/T 3480-1997 |
Calculation methods of load capacity for involute cylindrical gears 渐开线圆柱齿轮承载能力计算方法 |
China National Standards capacity |
English PDF |
GB/T 5095.3-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 3:Current-carrying capacity tests 电子设备用机电元件 基本试验规程及测量方法 第3部分:载流容量试验 |
China National Standards capacity |
English PDF |
GB/T 15181-1994 |
capacity calibration of spherical metal tanks--Strapping method 球形金属罐容积标定法(围尺法) |
China National Standards capacity |
English PDF |
GB/T 14230-1993 |
Standard of test method for bending load capacity of gears 齿轮弯曲疲劳强度试验方法 |
China National Standards capacity |
English PDF |
GB/T 14229-1993 |
Standard of test method for surface load capacity of gears 齿轮接触疲劳强度试验方法 |
China National Standards capacity |
English PDF |
GB/T 13799-1992 |
Methods of the calculation for load capacity of cylindrical gear with double-circular-arc tooth profile 双圆弧圆柱齿轮承载能力计算方法 |
China National Standards capacity |
English PDF |
GB/T 13672-1992 |
Standard test method for scuffing load capacity of gears 齿轮胶合承载能力试验方法 |
China National Standards capacity |
English PDF |
GB/T 13231-1991 |
Calculated methods of carrying capacity for receiving and dispatching tracks at railway marshalling station(3-stage/3-yard) 铁路编组站到发线通过能力计算方法 (三级三场) |
China National Standards capacity |
English PDF |
GB/T 12810-1991 |
Laboratory glassware--Volumetric glassware--Methods for use and testing of capacity 实验室玻璃仪器 玻璃量器的容量校准和使用方法 |
China National Standards capacity |
English PDF |
GB/T 12541-1990 |
Motor vehicles--Passing topography capacity--Test method 汽车地形通过性试验方法 |
China National Standards capacity |
English PDF |
GB/T 10063-1988 |
Simplified methods for the calculation of load capacity of involute cylindrical gears for general machines 通用机械渐开线圆柱齿轮 承载能力简化计算方法 |
China National Standards capacity |
English PDF |
GB/T 9654-1988 |
Calculated methods of sorting capacity for railway marshalling station (3-stage/3-yard) 铁路编组站改编能力计算方法 (三级三场) |
China National Standards capacity |
English PDF |
GB/T 7585-1987 |
capacity series and radio-frequency channel arrangement for analog microwave relay systems 模拟微波接力通信系统容量系列及波道配置 |
China National Standards capacity |
English PDF |
GB 6280-1986 |
capacity series and frequency channels arrangement in 25 to 1000 MHz land mobile telecommunication network 25~1000 MHz陆地移动通信网的容量系列及频道配置 |
China National Standards capacity |
English PDF |
GB/T 3974-1983 |
Telephone transmission interference allowances for long-distance high-capacity analogue microwave communication systems 大容量长距离模拟微波通信干线电话传输干扰容限 |
China National Standards capacity |
English PDF |
GB/T 3142-1982 |
Lubricants--Determination of load-carrying capacity (four balls method) 润滑剂承载能力测定法 (四球法) |
China National Standards capacity |
English PDF |
Find out:159Items | To Page of: First -Previous-Next -Last | 1 2 |