GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 19926-2005 |
Hydraulic fluid power-Gas-loaded accumulators-Dimensions of gas port 液压传动 充气式蓄能器 气口尺寸 |
China National Standards lu |
English PDF |
GB/T 19925-2005 |
Hydraulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port 液压传动 隔离式充气蓄能器 优先选择的液压油口 |
China National Standards lu |
English PDF |
GB/T 18570.9-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法 |
China National Standards lu |
English PDF |
GB/T 18570.10-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法 |
China National Standards lu |
English PDF |
GB/T 19895.1-2005 |
Projection in indoor rooms-Screen illumination test for still projectors 室内放映 幻灯、投影放映设备 银幕照度的测定方法 |
China National Standards lu |
English PDF |
GB/T 17214.4-2005 |
Operating conditions for industrial-process measurement and control equipment Part 4:Corrosive and erosive influences 工业过程测量和控制装置的工作条件 第4部分:腐蚀和侵蚀影响 |
China National Standards lu |
English PDF |
GB/T 17213.2-2005 |
Industrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的计算公式 |
China National Standards lu |
English PDF |
GB 19872-2005 |
Rock drilling machines and pneumatic tools-Limited value of noise 凿岩机械与气动工具 噪声限值 |
China National Standards lu |
English PDF |
GB/T 19875-2005 |
Mechanical vibration and shock-Vibration of stationary structures-Specific requirements for quality management in measurement and evaluation of vibration 机械振动与冲击 固定结构的振动 在振动测量和评价方面质量管理的具体要求 |
China National Standards lu |
English PDF |
GB/T 5585.2-2005 |
Copper or aluminium and its alloy bus bars for electrical purposes Part 2:Aluminium and aluminium alloy bus bars 电工用铜、铝及其合金母线 第2部分:铝和铝合金母线 |
China National Standards lu |
English PDF |
GB/T 5585.1-2005 |
Copper or aluminium and its alloy bus bars for electrical purposes Part 1:Copper and copper alloy bus bars 电工用铜、铝及其合金母线 第1部分:铜和铜合金母线 |
China National Standards lu |
English PDF |
GB/T 16935.3-2005 |
Insulation coordination for equipment within low-voltage systems Part 3:Use of coating,potting or moulding for protection against pollution 低压系统内设备的绝缘配合 第3部分:利用涂层、罐封和模压进行防污保护 |
China National Standards lu |
English PDF |
GB 18466-2005 |
Discharge standard of water pollutants for medical organization 医疗机构水污染物排放标准 |
China National Standards lu |
English PDF |
GB/T 8151.15-2005 |
Methods for chemical analysis of zinc concentrates-Determination of mercury content-Atomic fluorescence spectrometry method 锌精矿化学分析方法 汞量的测定 原子荧光光谱法 |
China National Standards lu |
English PDF |
GB/T 6730.62-2005 |
Iron ores-Determination of calcium,silicon,manganese,titanium,phosphorus magnesium,aluminium and barium content Wavelength dispersive X-ray fluorescence spectrometric method 铁矿石 钙、硅、镁、钛、磷、锰、铝和钡含量的测定 波长色散X射线荧光光谱法 |
China National Standards lu |
English PDF |
GB 12021.7-2005 |
Limited values of energy efficiency and evaluating values of energy conservation for color television broadcasting receivers 彩色电视广播接收机能效限定值及节能评价值 |
China National Standards lu |
English PDF |
GB 19821-2005 |
Discharge Standard of Pollutants for beer industry 啤酒工业污染物排放标准 |
China National Standards lu |
English PDF |
GB/T 15716-2005 |
Coal sizing equipment-Performance evaluation 煤用筛分设备工艺性能评定方法 |
China National Standards lu |
English PDF |
GB/Z 19848-2005 |
Hydraulic fluid power-Component cleanliness-Guidelines for achieving and controlling cleanliness of components from manufacture to installation 液压元件从制造到安装达到和控制清洁度的指南 |
China National Standards lu |
English PDF |
GB/T 7935-2005 |
Hydraulic fluid power-General requirements for hydraulic components 液压元件 通用技术条件 |
China National Standards lu |
English PDF |
GB/T 3452.1-2005 |
Fluid power systems-O-rings-Part 1:Inside diameters,cross-sections,tolerances and size identification code 液压气动用O形橡胶密封圈 第1部分:尺寸系列及公差 |
China National Standards lu |
English PDF |
GB/T 2879-2005 |
Hydraulic fluid power-Cylinders-Housings for piston and rod seals in reciprocating applications-Dimensions and tolerances 液压缸活塞和活塞杆动密封 沟槽尺寸和公差 |
China National Standards lu |
English PDF |
GB/T 2351-2005 |
Fluid power systems and components-Connectors and associated components-Nominal outside diameters of tubes and nominal inside diameters of hoses 液压气动系统用硬管外径和软管内径 |
China National Standards lu |
English PDF |
GB/T 14043-2005 |
Hydraulic fluid power-Code for identification of valve mounting surfaces and cartridge valve cavities 液压传动 阀安装面和插装阀阀孔的标识代号 |
China National Standards lu |
English PDF |
GB/T 8753.4-2005 |
Anodizing of aluminium and aluminium alloys-assessment of quality of sealed anodic oxide coatings Part 4:Dye spot test with prior acid treatment 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第4部分:酸处理后的染色斑点法 |
China National Standards lu |
English PDF |
GB/T 8753.3-2005 |
Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 3:Admittance test 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第3部分:导纳法 |
China National Standards lu |
English PDF |
GB/T 8753.2-2005 |
Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 2:Phosphoric acid/chromic acid test with nitric acid predip 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第2部分:硝酸预浸的磷铬酸法 |
China National Standards lu |
English PDF |
GB/T 8753.1-2005 |
Anodizing of aluminium and aluminium alloys-Assessment of quality of sealed anodic oxide coatings Part 1:Phosphoric acid/chromic acid test without nitric acid predip 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第1部分:无硝酸预浸的磷铬酸法 |
China National Standards lu |
English PDF |
GB/T 8014.3-2005 |
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method 铝及铝合金阳极氧化 氧化膜厚度的测量方法 第3部分:分光束显微镜法 |
China National Standards lu |
English PDF |
GB/T 8014.2-2005 |
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part2:Mass-loss method 铝及铝合金阳极氧化 氧化膜厚度的测量方法 第2部分:质量损失法 |
China National Standards lu |
English PDF |
GB/T 8014.1-2005 |
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle 铝及铝合金阳极氧化 氧化膜厚度的测量方法 第1部分:测量原则 |
China National Standards lu |
English PDF |
GB/T 7998-2005 |
Test method for intergranular corrosion of aluminium alloy 铝合金晶间腐蚀测定方法 |
China National Standards lu |
English PDF |
GB 7658-2005 |
Food additive-Sorbitol solution 食品添加剂 山梨糖醇液 |
China National Standards lu |
English PDF |
GB 7657-2005 |
Food additive-Glucono delta-lactone 食品添加剂 葡萄糖酸-δ-内酯 |
China National Standards lu |
English PDF |
GB 7655.2-2005 |
Food additive Brilliant blue Aluminum lake 食品添加剂 亮蓝铝色淀 |
China National Standards lu |
English PDF |
GB 7655.1-2005 |
Food additive Brilliant blue 食品添加剂 亮蓝 |
China National Standards lu |
English PDF |
GB 6227.2-2005 |
Food Additive Sunset Yellow Aluminum Lake 食品添加剂 日落黄铝色淀 |
China National Standards lu |
English PDF |
GB 4479.2-2005 |
Food additive Amaranth aluminum lake 食品添加剂 苋菜红铝色淀 |
China National Standards lu |
English PDF |
GB 19825-2005 |
Food additive-Diluted benzoyl peroxide 食品添加剂 稀释过氧化苯甲酰 |
China National Standards lu |
English PDF |
GB 1904-2005 |
Food additive Sodium carboxymethyl cellulose 食品添加剂 羧甲基纤维素钠 |
China National Standards lu |
English PDF |
GB/T 19822-2005 |
Specification for hard anodic oxidation coatings on aluminium and its alloys 铝及铝合金硬质阳极氧化膜规范 |
China National Standards lu |
English PDF |
GB/T 12612-2005 |
General specification for multifunctional solution of iron and steel surface treatment 多功能钢铁表面处理液通用技术条件 |
China National Standards lu |
English PDF |
GB/T 12600-2005 |
Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials 金属覆盖层 塑料上镍+铬电镀层 |
China National Standards lu |
English PDF |
GB 5606.6-2005 |
Cigarettes-Quality Evaluation 卷烟 第6部分:质量综合判定 |
China National Standards lu |
English PDF |
GB 5606.4-2005 |
Cigarettes-Technical Requirements for Sense Evaluation 卷烟 第4部分:感官技术要求 |
China National Standards lu |
English PDF |
GB/T 19802-2005 |
Non-destructive testing-Industrial radiographic illuminators-Minimum requirements 无损检测 工业射线照相观片灯 最低要求 |
China National Standards lu |
English PDF |
GB 17691-2005 |
Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V) 车用压燃式、气体燃料点燃式发动机与汽车排气污染物排放限值及测量方法(中国III、IV、V阶段) |
China National Standards lu |
English PDF |
GB 19756-2005 |
Limits and measurement methods for exhaust pollutants from diesel engines of tr-wheel low-speed goods vehicles 三轮汽车和低速货车用柴油机排气污染物排放限值及测量方法(中国I、II阶段) |
China National Standards lu |
English PDF |
GB 18285-2005 |
Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions 点燃式发动机汽车排气污染物排放限值及测量方法(双怠速法及简易工况法) |
China National Standards lu |
English PDF |
GB/T 19750-2005 |
Hybrid electric vehicles-Engineering approval evaluation program 混合动力电动汽车 定型试验规程 |
China National Standards lu |
English PDF |
GB/T 18388-2005 |
Electric vehicles-Engineering approval evaluation program 电动汽车 定型试验规程 |
China National Standards lu |
English PDF |
GB/T 19770-2005 |
Cinematography-Viewing conditions for the evaluation of films and slides for television-Colours,luminances and dimensions 电影 评价电视用电影和幻灯的观看条件 彩色、亮度和尺寸 |
China National Standards lu |
English PDF |
GB/T 7165.1-2005 |
Equipment for continuous monitoring of radioactivity in gaseous effluents Part1:General requirements 气态排出流(放射性)活度连续监测设备 第一部分:一般要求 |
China National Standards lu |
English PDF |
GB/T 5351-2005 |
Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure 纤维增强热固性塑料管短时水压 失效压力试验方法 |
China National Standards lu |
English PDF |
GB/T 2576-2005 |
Test method for insoluble matter content of resin rsed in fiber reinforced plastics 纤维增强塑料树脂不可溶分含量试验方法 |
China National Standards lu |
English PDF |
GB/T 19767-2005 |
Evaluation methods for microprocesssor-based instrument 基于微处理器仪表的评定方法 |
China National Standards lu |
English PDF |
GB/T 10248-2005 |
Gas analysis-Preparation of calibration gas mixtures-Static volumetric methods 气体分析 校准用混合气体的制备 静态体积法 |
China National Standards lu |
English PDF |
GB/T 19764-2005 |
Guide to the choice of series of preferred numbers and of series containing more rounded values of Preferred numbers 优先数和优先数化整值系列的选用指南 |
China National Standards lu |
English PDF |
GB/T 5776-2005 |
Corrosion of metals and alloys-Guidelines for exposing and evaluating metals and alloys in surface sea water 金属和合金的腐蚀 金属和合金 在表层海水中暴露和评定的导则 |
China National Standards lu |
English PDF |
GB/T 19748-2005 |
Steel-Charpy V-notch pendulum impact test-Instrumented test method 钢材夏比V型缺口摆锤冲击试验 仪器化试验方法 |
China National Standards lu |
English PDF |
GB/T 19746-2005 |
Corrosion of metals and alloys-Alternate immersion test in salt solution 金属和合金的腐蚀 盐溶液周浸试验 |
China National Standards lu |
English PDF |
GB/T 19745-2005 |
Corrosion tests in artificial atmosphere at very low Concentrations of polluting gas(es) 人造低浓度污染气氛中的腐蚀试验 |
China National Standards lu |
English PDF |
GB/T 19743-2005 |
Water atomized pure iron powder and alloyed steel powder for powder metallurgy 粉末冶金用水雾化纯铁粉、合金钢粉 |
China National Standards lu |
English PDF |
GB/T 15970.8-2005 |
Corrosion of metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments 金属和合金的腐蚀 应力腐蚀试验 第8部分:焊接试样的制备和应用 |
China National Standards lu |
English PDF |
GB/T 10561-2005 |
Steel-Determination of content of nonmetallic inclusions-Micrographic method using standards diagrams 钢中非金属夹杂物含量的测定--标准评级图显微检验法 |
China National Standards lu |
English PDF |
GB 14763-2005 |
Limits and measurement methods for fuel evaporative Pollutants from heavy-duty vehicles equipped with P.I engines(Trap method) 装用点燃式发动机重型汽车 燃油蒸发污染物排放限值及测量方法(收集法) |
China National Standards lu |
English PDF |
GB 11340-2005 |
Limits and measurement methods for crankcase pollutants From heavy-duty vehicles equipped with P.I engines 装用点燃式发动机重型汽车 曲轴箱污染物排放限值及测量方法 |
China National Standards lu |
English PDF |
GB 17741-2005 |
Evaluation of seismic safety for engineering sites 工程场地地震安全性评价 |
China National Standards lu |
English PDF |
GB/T 16886.12-2005 |
Biological evaluation of medical devices-Part 12:Sample preparation and reference materials 医疗器械生物学评价 第12部分:样品制备与参照样品 |
China National Standards lu |
English PDF |
GB/T 16886.10-2005 |
Biological evaluation of medical devices-Part 10:Tests for irritation and delayed-type hypersensitivity 医疗器械生物学评价 第10部分:刺激与迟发型超敏反应试验 |
China National Standards lu |
English PDF |
GB/T 19810-2005 |
Polyethylene(PE)pipe and fittings-Determination of the tensile strength and failure mode of test pieces from a butt-fused joint 聚乙烯(PE)管材和管件 热熔对接接头 拉伸强度和破坏形式的测定 |
China National Standards lu |
English PDF |
GB/T 19674.3-2005 |
Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with metal-to-metal sealing(type B) 液压管接头用螺纹油口和柱端 金属对金属密封柱端(B型) |
China National Standards lu |
English PDF |
GB/T 19674.2-2005 |
Connections for general use and fluid power Ports and stud ends with thread-Stud ends with elastomeric sealing(A type and type E) 液压管接头用螺纹油口和柱端--填料密封柱端(A型和E型) |
China National Standards lu |
English PDF |
GB/T 19674.1-2005 |
Connections for general use and fluid power Ports and stud ends with thread-Threaded port 液压管接头用螺纹油口和柱端--螺纹油口 |
China National Standards lu |
English PDF |
GB/T 17626.14-2005 |
Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test 电磁兼容 试验和测量技术 电压波动抗扰度试验 |
China National Standards lu |
English PDF |
GB/T 19042.4-2005 |
Evaluation and routine testing in medical imaging departments-Part 3-4:Acceptance tests-Imaging performance of dental X-ray equipment 医用成像部门的评价及例行试验 第3-4部分:牙科X射线设备成像性能验收试验 |
China National Standards lu |
English PDF |
GB/T 19042.3-2005 |
Evaluation and routine testing in medical imaging departments-Part 3-3:Acceptance tests-Imaging performance of X-ray equipment for digital subtraction angiography(DSA) 医用成像部门的评价及例行试验 第3-3部分:数字减影血管造影(DSA)X射线设备成像性能验收试验 |
China National Standards lu |
English PDF |
GB/T 19042.2-2005 |
Evaluation and routine testing in medical imaging departments-Part 3-2:Acceptance tests-Imaging performance of mammographic X-ray equipment 医用成像部门的评价及例行试验 第3-2部分:乳腺摄影X射线设备成像性能验收试验 |
China National Standards lu |
English PDF |
GB 12263-2005 |
Artificial Heart-lung Machine Water Heating/Cooling System 人工心肺机热交换水箱 |
China National Standards lu |
English PDF |
GB 12260-2005 |
Artificial heart-lung machine--Roller pump 人工心肺机 滚压式血泵 |
China National Standards lu |
English PDF |
GB/T 19634-2005 |
In vitro diagnostic test systems-General technical requirements for blood-glucose monitoring systems for self-testing 体外诊断检验系统 自测用血糖监测系统通用技术条件 |
China National Standards lu |
English PDF |
GB/T 2419-2005 |
Test method for fluidity of cement mortar 水泥胶砂流动度测定方法 |
China National Standards lu |
English PDF |
GB/T 19657-2005 |
Heat test source(H.T.S)lamps for carrying out heating tests on luminaires 灯具加热试验用热试验源灯 |
China National Standards lu |
English PDF |
GB/T 19656-2005 |
DC supplied electronic ballasts for tubular fluorescent lamps--Performance requirements 管形荧光灯用直流电子镇流器 性能要求 |
China National Standards lu |
English PDF |
GB 7000.19-2005 |
Safety requirements for photo and film luminaires(non-professional) 照相和电影用灯具(非专业用)安全要求 |
China National Standards lu |
English PDF |
GB 19652-2005 |
Discharge lamps(excluding fluorescent lamps)--Safety specifications 放电灯 (荧光灯除外)安全要求 |
China National Standards lu |
English PDF |
GB 19510.12-2005 |
Lamp controlgear--Part 12:Particular requirements for miscellaneous electronic circuits used with luminaires 灯的控制装置 第12部分:与灯具联用的杂类电子线路的特殊要求 |
China National Standards lu |
English PDF |
GB/T 2423.54-2005 |
Environmental testing for electric and electronic products-Part 2:Test Methods-Test Xc:Fluid contamination 电工电子产品环境试验 第2部分:试验方法 试验Xc:流体污染 |
China National Standards lu |
English PDF |
GB 19615-2004 |
Pollutants content limitation in soil for destruction of chemical weapons abandoned by Japan in China 销毁日本遗弃在华化学武器 环境土壤中污染物含量标准(试行) |
China National Standards lu |
English PDF |
GB 19614-2004 |
Concentration limitations of pollutants in ground water for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器 地下水中污染物浓度标准(试行) |
China National Standards lu |
English PDF |
GB 19613-2004 |
Concentration limitations of pollutants in surface water for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器 地表水中污染物浓度标准(试行) |
China National Standards lu |
English PDF |
GB 19612-2004 |
Concentrationlimitation of air pollutants for the destruction of abandoned chemical weapons by Japan in China 销毁日本遗弃在华化学武器 环境空气中污染物浓度标准(试行) |
China National Standards lu |
English PDF |
GB 19606-2004 |
Noise limit value for household and similarelectrical appliances 家用和类似用途电器噪声限值 |
China National Standards lu |
English PDF |
GB/T 19602-2004 |
1,1-Difluoroethane for industrial use(HFC-152a) 工业用1,1-二氟乙烷(HFC-152a) |
China National Standards lu |
English PDF |
GB/T 19600-2004 |
Geometrical Product Specifications(GPS)--Surface texture:Profile method--Calibrationof contact(stylus)instruments 产品几何量技术规范(GPS) 表面结构 轮廓法 接触(触针)式仪器的校准 |
China National Standards lu |
English PDF |
GB/T 16857.5-2004 |
Geometrical Product Specifications(GPS)--Acceptance and reverification tests for coordinate measuring machines(CMM)--Part 5:CMMs using multiple-stylus probing systems 产品几何量技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用多探针探测系统的坐标测量机 |
China National Standards lu |
English PDF |
GB 19577-2004 |
The minimum allowable values of the energy effic-iency and energy effic-iency grades for water chillers 冷水机组能效限定值及能源效率等级 |
China National Standards lu |
English PDF |
GB 19576-2004 |
The minimum allowable values of the energy effic-iency and energy efficiency grades for unitary air conditioners 单元式空气调节机能效限定值及能源效率等级 |
China National Standards lu |
English PDF |
GB 19574-2004 |
Limited values of energy efficiency and evaluating values of energy conservation of ballast for high-pressure sodium lamps 高压钠灯用镇流器能效限定值及节能评价值 |
China National Standards lu |
English PDF |
GB 19573-2004 |
Limited values of energy efficiency and rating criteria for high-pressure sodium vapour lamps 高压钠灯能效限定值及能效等级 |
China National Standards lu |
English PDF |
Find out:5792Items | To Page of: First -Previous-Next -Last | [44] [45] [46] [47] [48] [49] [50] |