Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 31392-2022 |
Technical guidelines for mine water utilization in coal mines 煤矿矿井水利用技术导则 |
China National Standards on |
 English PDF |
| GB/T 42252-2022 |
Torque and pretightening force test method of high lock nut for aviation 航空用高锁螺母力矩及预紧力测试方法 |
China National Standards on |
English PDF |
| GB/T 42181-2022 |
Test method for tightening torque of threaded blind rivets used in aviation 航空用螺纹抽芯铆钉锁紧力矩测试方法 |
China National Standards on |
English PDF |
| GB/T 38812.4-2022 |
Direct reduced iron - Determination of metallic iron content - Bromine-methanol titration 直接还原铁 金属铁含量的测定 溴-甲醇滴定法 |
China National Standards on |
English PDF |
| GB/T 42279-2022 |
Vulcanized or thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile load 硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变 |
China National Standards on |
English PDF |
| GB/T 42278-2022 |
Vulcanized rubber - Determination of hot tensile stress 硫化橡胶 热拉伸应力的测定 |
China National Standards on |
English PDF |
| GB/T 41948-2022 |
Particle Characterization Sample Preparation 颗粒表征 样品准备 |
China National Standards on |
English PDF |
| GB/T 42162-2022 |
Raw rubber - Determination of residual monomers and other volatile low molecular weight compounds by capillary gas chromatography - Thermal desorption (dynamic headspace) method 生橡胶 毛细管气相色谱测定残留单体和其他挥发性低分子量化合物 热脱附（动态顶空）法 |
China National Standards on |
English PDF |
| GB/T 42266-2022 |
Flexible porous polymeric materials - Laboratory evaluation of the combustion characteristics of small specimens in the horizontal direction under a small flame 柔性多孔聚合物材料 小试样在小火焰下水平方向燃烧特性的实验室评估 |
China National Standards on |
English PDF |
| GB/T 42258-2022 |
Determination of Fatigue Properties of Flexible Porous Polymer Materials by Constant Deformation Method 柔性多孔聚合物材料 恒定形变法测定疲劳性能 |
China National Standards on |
English PDF |
| GB/T 42267-2022 |
Determination of compression set of flexible porous polymeric materials under wet conditions 柔性多孔聚合物材料 在潮湿条件下压缩永久变形的测定 |
China National Standards on |
English PDF |
| GB/T 39693.8-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method 硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度 |
China National Standards on |
English PDF |
| GB/T 39693.7-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method 硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度 |
China National Standards on |
English PDF |
| GB/T 41938-2022 |
Rubber compounding agent - Precipitated hydrated silica - Evaluation method in mixtures of solution-polymerized styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) 橡胶配合剂 沉淀水合二氧化硅 在溶聚丁苯橡胶(S-SBR)和丁二烯橡胶(BR)混合物中的评价方法 |
China National Standards on |
English PDF |
| GB/T 41956-2022 |
Determination of fluff amount of carbon fiber tow 碳纤维丝束起毛量的测定 |
China National Standards on |
English PDF |
| GB/T 26949.2-2022 |
Industrial vehicles - Stability verification - Part 2: Counterbalanced forklifts 工业车辆 稳定性验证 第2部分：平衡重式叉车 |
China National Standards on |
English PDF |
| GB/T 3780.29-2022 |
Carbon black - Part 29: Determination of solvent extractables 炭黑 第29部分：溶剂可萃取物的测定 |
China National Standards on |
English PDF |
| GB/T 41955-2022 |
Non-opening compression test method for multidirectional laminates of polymer matrix composites 聚合物基复合材料多向层合板无开孔压缩试验方法 |
China National Standards on |
English PDF |
| GB/T 26958.71-2022 |
Product Geometric Specifications (GPS) Filtering Part 71: Robust Region Filters Gaussian Regression Filters 产品几何技术规范（GPS） 滤波 第71部分：稳健区域滤波器 高斯回归滤波器 |
China National Standards on |
English PDF |
| GB/T 33523.606-2022 |
Geometric Product Specification (GPS) Surface Structure Area Method Part 606: Nominal Characteristics of Non-Contact (Zoom) Type Instruments 产品几何技术规范（GPS） 表面结构 区域法 第606部分：非接触（变焦）式仪器的标称特性 |
China National Standards on |
English PDF |
| GB/T 33523.605-2022 |
Product Geometric Specifications (GPS) Surface Structure Area Method Part 605: Nominal Characteristics of Non-Contact (Point AF Probe) Type Instruments 产品几何技术规范（GPS） 表面结构 区域法 第605部分：非接触（点自动对焦探针）式仪器的标称特性 |
China National Standards on |
English PDF |
| GB/T 33523.602-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 602: Nominal Characteristics of Non-Contact (Confocal Chromatic Probe) Type Instruments 产品几何技术规范（GPS） 表面结构 区域法 第602部分：非接触（共聚焦色差探针）式仪器的标称特性 |
China National Standards on |
English PDF |
| GB/T 26958.85-2022 |
Geometric Product Specification (GPS) Filtering Part 85: Morphological Region Filters Segmentation 产品几何技术规范（GPS） 滤波 第85部分：形态学区域滤波器 分割 |
China National Standards on |
English PDF |
| GB/T 42084-2022 |
Product Geometric Specification (GPS) Extraction 产品几何技术规范(GPS) 提取 |
China National Standards on |
English PDF |
| GB/T 16857.9-2022 |
Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance and Re-inspection Testing Part 9: Coordinate Measuring Machines Equipped with Multiple Probing Systems 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第9部分：配备多种探测系统的坐标测量机 |
China National Standards on |
English PDF |
| GB/T 16857.8-2022 |
Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance and Re-inspection Testing Part 8: Coordinate Measuring Machines Using Optical Distance Sensors 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第8部分：使用光学距离传感器的坐标测量机 |
China National Standards on |
English PDF |
| GB/T 16857.7-2022 |
Product Geometric Specification (GPS) Coordinate Measuring System (CMS) Acceptance Test and Re-inspection Test Part 7: Coordinate Measuring Machine Equipped with Image Detection System 产品几何技术规范(GPS) 坐标测量系统（CMS）的验收检测和复检检测 第7部分：配置影像探测系统的坐标测量机 |
China National Standards on |
English PDF |
| GB/T 16857.12-2022 |
Geometric product specification (GPS) Acceptance testing and re-inspection testing of coordinate measuring systems (CMS) Part 12: Coordinate measuring machines with articulated arms 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第12部分：关节臂式坐标测量机 |
China National Standards on |
English PDF |
| GB/T 16857.10-2022 |
Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance Test and Re-inspection Test Part 10: Laser Tracker 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第10部分：激光跟踪仪 |
China National Standards on |
English PDF |
| GB/T 33523.604-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 604: Nominal Characteristics of Non-Contact (Coherent Scanning Interferometry) Type Instruments 产品几何技术规范（GPS） 表面结构 区域法 第604部分：非接触（相干扫描干涉）式仪器的标称特性 |
China National Standards on |
English PDF |
| GB/T 33523.603-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 603: Nominal Properties of Non-Contact (Phase Shift Interferometry) Type Instruments 产品几何技术规范（GPS） 表面结构 区域法 第603部分：非接触（相移干涉显微）式仪器的标称特性 |
China National Standards on |
English PDF |
| GB/T 33523.3-2022 |
Geometric Product Specification (GPS) Surface Structure Area Method Part 3: Set of Specification Operations 产品几何技术规范（GPS） 表面结构 区域法 第3部分：规范操作集 |
China National Standards on |
English PDF |
| GB/T 42178-2022 |
Requirements for the interface of cargo entering and exiting the space station airlock 空间站气闸舱进出货物接口要求 |
China National Standards on |
English PDF |
| GB/T 42177-2022 |
Technical requirements and test methods for hydrogen valves in hydrogen refueling stations 加氢站氢气阀门技术要求及试验方法 |
China National Standards on |
English PDF |
| GB/T 42269-2022 |
Separation membrane pore size test method - gas permeation method 分离膜孔径测试方法 气体渗透法 |
China National Standards on |
English PDF |
| GB/T 41946-2022 |
Rubber - Determination of total sulfur content - Ion chromatography 橡胶 全硫含量的测定 离子色谱法 |
China National Standards on |
English PDF |
| GB/T 41945-2022 |
Rubber and vulcanizate - Determination of metal content by inductively coupled plasma optical emission spectrometry (ICP-OES) 生胶和硫化胶 用电感耦合等离子体发射光谱仪(ICP-OES)测定金属含量 |
China National Standards on |
English PDF |
| GB/T 41939-2022 |
Determination of magnesium content in rubber - Atomic absorption spectrometry 橡胶中镁含量的测定 原子吸收光谱法 |
China National Standards on |
English PDF |
| GB/T 41940-2022 |
Rubber - Determination of Viscosity and Stress Relaxation with a Rotorless Closed Shear Rheometer 橡胶 用无转子密闭剪切流变仪测定黏度和应力松弛 |
China National Standards on |
English PDF |
| GB/T 41941-2022 |
Vulcanized rubber - Determination of fatigue crack growth rate 硫化橡胶 疲劳裂纹扩展速率的测定 |
China National Standards on |
English PDF |
| GB/T 42122-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of abrasion resistance (modified Lamborn abrasion tester method) 硫化橡胶或热塑性橡胶 耐磨性能的测定（改进型兰伯恩磨耗试验机法） |
China National Standards on |
English PDF |
| GB/T 42089-2022 |
Child-resistant packaging - Requirements and test methods for non-reclosable packaging for non-drug products 防止儿童开启包装 非药品用不可再封口包装的要求与试验方法 |
China National Standards on |
English PDF |
| GB/T 13747.26-2022 |
Methods for chemical analysis of zirconium and zirconium alloys - Part 26: Determination of alloys and impurity elements - Inductively coupled plasma atomic emission spectrometry 锆及锆合金化学分析方法 第26部分：合金及杂质元素的测定 电感耦合等离子体原子发射光谱法 |
China National Standards on |
English PDF |
| GB/T 37211.3-2022 |
Methods for chemical analysis of germanium metal - Part 3: Determination of trace impurity elements - Glow discharge mass spectrometry 金属锗化学分析方法 第3部分:痕量杂质元素的测定 辉光放电质谱法 |
China National Standards on |
English PDF |
| GB/T 42274-2022 |
Determination of content and distribution of trace elements (magnesium, gallium) in aluminum nitride materials Secondary ion mass spectrometry 氮化铝材料中痕量元素（镁、镓）含量及分布的测定 二次离子质谱法 |
China National Standards on |
English PDF |
| GB/T 42263-2022 |
Determination of nitrogen content in silicon single crystals - Secondary ion mass spectrometry 硅单晶中氮含量的测定 二次离子质谱法 |
China National Standards on |
English PDF |
| GB/T 42275-2022 |
Cemented carbide - Determination of total carbon content - High frequency combustion infrared absorption method/thermal conductivity method 硬质合金 总碳量的测定 高频燃烧红外吸收法/热导法 |
China National Standards on |
English PDF |
| GB/T 42260-2022 |
Lithium iron phosphate electrochemical performance test cycle life test method 磷酸铁锂电化学性能测试 循环寿命测试方法 |
China National Standards on |
English PDF |
| GB/T 42161-2022 |
Electrochemical Performance Test of Lithium Iron Phosphate Test Method for First Discharge Specific Capacity and First Charge and Discharge Efficiency 磷酸铁锂电化学性能测试 首次放电比容量及首次充放电效率测试方法 |
China National Standards on |
English PDF |
| GB/T 42277-2022 |
Test method for carbonation of cement mortar 水泥胶砂碳化性试验方法 |
China National Standards on |
English PDF |
| GB/T 42268-2022 |
Ethylene-propylene-diene rubber (EPDM) evaluation method 乙烯-丙烯-二烯烃橡胶(EPDM) 评价方法 |
China National Standards on |
English PDF |
| GB/T 42188-2022 |
Monthly Climate Forecast 月气候预测 |
China National Standards on |
English PDF |
| GB/T 14352.24-2022 |
Methods for chemical analysis of tungsten ore and molybdenum ore - Part 24: Determination of germanium content - Inductively coupled plasma mass spectrometry 钨矿石、钼矿石化学分析方法 第24部分：锗含量的测定 电感耦合等离子体质谱法 |
China National Standards on |
English PDF |
| GB/T 42265-2022 |
Test method for air purification performance of photocatalytic materials - Removal of toluene 光催化材料空气净化性能测试方法 甲苯的去除 |
China National Standards on |
English PDF |
| GB/T 42249-2022 |
Technical indicators and calculation methods for comprehensive utilization of mineral resources 矿产资源综合利用技术指标及其计算方法 |
China National Standards on |
English PDF |
| GB/T 42273-2022 |
Zirconium compound chemical analysis method Calcium, hafnium, titanium, sodium, iron, chromium, cadmium, zinc, manganese, copper, nickel, lead content determination Inductively coupled plasma atomic emission spectrometry 锆化合物化学分析方法 钙、铪、钛、钠、铁、铬、镉、锌、锰、铜、镍、铅含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards on |
English PDF |
| GB/T 13477.23-2022 |
Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering 建筑密封材料试验方法 第23部分：人工加速气候老化下拉伸-压缩循环后耐久性的测定 |
China National Standards on |
English PDF |
| GB/T 13477.22-2022 |
Test methods for building sealing materials - Part 22: Determination of curing characteristics 建筑密封材料试验方法 第22部分：固化特性的测定 |
China National Standards on |
English PDF |
| GB/T 42276-2022 |
Determination of Fluoride and Chloride Contents in Silicon Nitride Powder - Ion Chromatography 氮化硅粉体中氟离子和氯离子含量的测定 离子色谱法 |
China National Standards on |
English PDF |
| GB/T 42271-2022 |
Non-contact measurement method for resistivity of semi-insulating silicon carbide single crystal 半绝缘碳化硅单晶的电阻率非接触测试方法 |
China National Standards on |
English PDF |
| GB/T 42190-2022 |
Technical Guidelines for Satellite Remote Sensing Monitoring Haze 卫星遥感监测技术导则 霾 |
China National Standards on |
English PDF |
| GB/T 42189-2022 |
Technical guideline for satellite remote sensing monitoring Fire situation 卫星遥感监测技术导则 火情 |
China National Standards on |
English PDF |
| GB/T 42272-2022 |
Test method for chloride ion diffusion coefficient of cement mortar 水泥胶砂氯离子扩散系数检测方法 |
China National Standards on |
English PDF |
| GB/T 42251-2022 |
Technical Regulations for Ecological Restoration in Mining Subsidence Area 采矿沉陷区生态修复技术规程 |
China National Standards on |
English PDF |
| GB/T 42253-2022 |
Technical Regulations for Monitoring Vegetation Coverage and Development and Utilization of Sea Islands 海岛植被覆盖和开发利用情况监测技术规程 |
China National Standards on |
English PDF |
| GB/T 21445.2-2022 |
Oil and gas industry - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems 石油天然气工业 水下生产系统的设计和操作 第2部分：非粘结挠性管系统 |
China National Standards on |
English PDF |
| GB/T 42175-2022 |
Determination of copper, lead, zinc, cadmium and chromium in drilling mud and drilling cuttings for offshore oil exploration and development Microwave digestion-inductively coupled plasma mass spectrometry 海洋石油勘探开发钻井泥浆和钻屑中铜、铅、锌、镉、铬的测定 微波消解-电感耦合等离子体质谱法 |
China National Standards on |
English PDF |
| GB/T 17851-2022 |
Product Geometric Specifications (GPS) Geometric Tolerancing Datums and Datum Systems 产品几何技术规范（GPS） 几何公差 基准和基准体系 |
China National Standards on |
English PDF |
| GB/T 42105-2022 |
Cement and Coal Industry Energy Management Performance Evaluation Guidelines 水泥和煤炭行业能源管理绩效评价指南 |
China National Standards on |
English PDF |
| GB/T 42248-2022 |
Determination of iodine and bromine content in soil and water system sediment semi-melting-inductively coupled plasma mass spectrometry 土壤、水系沉积物 碘、溴含量的测定 半熔-电感耦合等离子体质谱法 |
China National Standards on |
English PDF |
| GB/T 42097-2022 |
Specifications for Integrity Management of Aboveground Petroleum Storage (Reserve) 地上石油储（备）库完整性管理规范 |
China National Standards on |
English PDF |
| GB/T 29165.2-2022 |
Oil and gas industry - Glass fiber reinforced plastic pipes - Part 2: Evaluation and manufacture 石油天然气工业 玻璃纤维增强塑料管 第2部分：评定与制造 |
China National Standards on |
English PDF |
| GB/T 29165.1-2022 |
Oil and gas industry - Glass fiber reinforced plastic pipes - Part 1: Vocabulary, symbols, applications and materials 石油天然气工业 玻璃纤维增强塑料管 第1部分：词汇、符号、应用及材料 |
China National Standards on |
English PDF |
| GB/T 20657-2022 |
Oil and gas industry - Performance formulas and calculations for casing, tubing, drill pipe, and line pipe used as casing or tubing 石油天然气工业 套管、油管、钻杆和用作套管或油管的管线管性能公式及计算 |
China National Standards on |
English PDF |
| GB/T 41927-2022 |
Plastics - Thermoset molding compounds - Short-term performance evaluation at elevated temperatures 塑料 热固性模塑料 高温下的短期性能评估 |
China National Standards on |
English PDF |
| GB/T 41926-2022 |
Plastics - Determination of 1,2-ethylene glycol content in epoxy resins 塑料 环氧树脂 1,2-乙二醇含量的测定 |
China National Standards on |
English PDF |
| GB/T 41928-2022 |
Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 |
China National Standards on |
English PDF |
| GB/T 41931-2022 |
Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 |
China National Standards on |
English PDF |
| GB/T 41932-2022 |
Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method 塑料 断裂韧性（GIC和KIC）的测定 线弹性断裂力学（LEFM）法 |
China National Standards on |
English PDF |
| GB/T 41933-2022 |
Plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法 |
China National Standards on |
English PDF |
| GB/T 41934-2022 |
Plastics - Determination of vertical flame spread of films and sheets 塑料 薄膜和薄片垂直火焰蔓延的测定 |
China National Standards on |
English PDF |
| GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards on |
English PDF |
| GB/T 11546.2-2022 |
Plastics - Determination of creep properties - Part 2: Three-point bending creep 塑料 蠕变性能的测定 第2部分:三点弯曲蠕变 |
China National Standards on |
English PDF |
| GB/T 19466.5-2022 |
Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 |
China National Standards on |
English PDF |
| GB/T 41936.2-2022 |
Plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homopolymers and copolymers 塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物 |
China National Standards on |
English PDF |
| GB/T 41936.1-2022 |
Plastics - Determination of torsional stiffness of flexible materials - Part 1: General method 塑料 柔性材料扭转刚度的测定 第1部分:通用方法 |
China National Standards on |
English PDF |
| GB/T 33061.11-2022 |
Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature 塑料 动态力学性能的测定 第11部分: 玻璃化转变温度 |
China National Standards on |
English PDF |
| GB/T 41937-2022 |
Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性 |
China National Standards on |
English PDF |
| GB/T 41942-2022 |
Natural raw rubber and natural rubber latex - Determination of nitrogen content - Micro Dumas combustion method 天然生胶和天然胶乳 氮含量的测定 微杜马斯燃烧法 |
China National Standards on |
English PDF |
| GB/T 42247-2022 |
Water Reuse Guidelines Evaluation of Benefits of Reclaimed Water Utilization 水回用导则 再生水利用效益评价 |
China National Standards on |
English PDF |
| GB/T 41943-2022 |
Bales of natural rubber - Determination of the amount of rubber coating 成包天然橡胶 胶包涂层量的测定 |
China National Standards on |
English PDF |
| GB/T 9253-2022 |
Oil and Gas Industry Machining, Measurement and Inspection of Casing, Tubing and Line Pipe Threads 石油天然气工业 套管、油管和管线管螺纹的加工、测量和检验 |
China National Standards on |
English PDF |
| GB/T 3565.6-2022 |
Safety requirements for bicycles - Part 6: Test methods for frame and front fork 自行车安全要求 第6部分：车架与前叉试验方法 |
China National Standards on |
English PDF |
| GB/T 5291.2-2022 |
Electric discharge forming machine tools - Accuracy inspection - Part 2: Double column machine tools (moving spindle head type) 电火花成形机床 精度检验 第2部分：双立柱机床（移动主轴头型） |
China National Standards on |
English PDF |
| GB/T 28784.5-2022 |
Mechanical vibration - Measurement of vibration in ships - Part 5: Guidelines for the measurement, evaluation and reporting of vibration for the habitability of passenger and merchant ships 机械振动 船舶振动测量 第5部分：客船和商船适居性振动测量、评价和报告准则 |
China National Standards on |
English PDF |
| GB/T 42077-2022 |
Biotechnology—Performance evaluation requirements for nucleic acid target sequence quantification methods—qPCR and dPCR methods 生物技术 核酸靶序列定量方法的性能评价要求 qPCR法和dPCR法 |
China National Standards on |
English PDF |
| GB/Z 42085-2022 |
Pneumatics - Component reliability assessment based on accelerated life testing - General guidelines and procedures 气动 基于加速寿命试验的元件可靠性评估 通用指南和程序 |
China National Standards on |
English PDF |
| GB/T 42086.2-2022 |
Hydraulic transmission connection - Flange connection - Part 2: 42 MPa, DN13～DN76 series 液压传动连接 法兰连接 第2部分: 42 MPa、DN13～DN76系列 |
China National Standards on |
English PDF |
| GB/T 42086.1-2022 |
Hydraulic transmission connection flange connection Part 1: 3.5 MPa ~ 35 MPa, DN13 ~ DN127 series 液压传动连接 法兰连接 第1部分:3.5 MPa～35 MPa、DN13～DN127系列 |
China National Standards on |
English PDF |
| GB/T 42078-2022 |
Guidelines for the development and construction of chemical parks 化工园区开发建设导则 |
China National Standards on |
English PDF |
| Find out:38906Items | To Page of: First -Previous-Next -Last | [26] [27] [28] [29] [30] [31] [32] |
+86-755-25831330
