Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 3691-2008 |
Mechanical properties testing method of steel wool cement tile 钢丝网水泥板力学性能试验方法 |
China National Standards tin |
 English PDF |
| GB 13042-2008 |
Packaging containers - tinplate aerosol can 包装容器 铁质气雾罐 |
China National Standards tin |
English PDF |
| GB/T 7790-2008 |
Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water 色漆和清漆 暴露在海水中的涂层耐阴极剥离性能的测定 |
China National Standards tin |
English PDF |
| GB/T 7704-2008 |
Non-destructive testing - Practice for residual stress measurement by X-Ray 无损检测 Ｘ射线应力测定方法 |
China National Standards tin |
English PDF |
| GB/T 600-2008 |
General specifications for marine piping valves and fittings 船舶管路阀件通用技术条件 |
China National Standards tin |
English PDF |
| GB/T 16544-2008 |
Non-destructive testing - Practice for gamma-ray radiographic testing by panoramic exposure 无损检测 伽玛射线全景曝光照相检测方法 |
China National Standards tin |
English PDF |
| GB/T 17455-2008 |
Non-destructive testing - Metallographic replica techniques of surface examination 无损检测 表面检测的金相复型技术 |
China National Standards tin |
English PDF |
| GB/T 15830-2008 |
Non-destructive testing - Practice for ultrasonic testing of circumferential butt welds in steel pipes and tubes 无损检测 钢制管道环向焊缝对接接头超声检测方法 |
China National Standards tin |
English PDF |
| GB/T 14616-2008 |
General specification for engine-room bottom coating 机舱舱底涂料通用技术条件 |
China National Standards tin |
English PDF |
| GB/T 14364-2008 |
Sliding intermediate shaft bearing of marine shafting 船舶轴系滑动式中间轴承 |
China National Standards tin |
English PDF |
| GB/T 12604.6-2008 |
Non-destructive testing - Terminology - Terms used in eddy current testing 无损检测 术语 涡流检测 |
China National Standards tin |
English PDF |
| GB/T 11344-2008 |
Non-destructive testing - Practice for measuring thickness by ultrasonic pulse-echo contact method 无损检测 接触式超声脉冲回波法测厚方法 |
China National Standards tin |
English PDF |
| GB/T 11259-2008 |
Non-destructive testing - Practice for fabrication and control of steel reference blocks used in ultrasonic testing 无损检测 超声检测用钢参考试块的制作与检验方法 |
China National Standards tin |
English PDF |
| GB/T 16414-2008 |
Terms relating to coal mining - Rock mechanics 煤矿科技术语 岩石力学 |
China National Standards tin |
English PDF |
| GB/T 15663.8-2008 |
Terms relating to coal mining - Part 8: Mine safety 煤矿科技术语 第8部分：煤矿安全 |
China National Standards tin |
English PDF |
| GB/T 15663.3-2008 |
Terms relating to coal mining - Part 3：Underground mining 煤矿科技术语 第3部分：地下开采 |
China National Standards tin |
English PDF |
| GB/T 15663.11-2008 |
Terms relating to coal mining - Part 11: Coal mining electrical engineering 煤矿科技术语 第11部分: 煤矿电气 |
China National Standards tin |
English PDF |
| GB/T 15663.10-2008 |
Terms relating to coal mining - Part 10: Winning machinery and developing machinery 煤矿科技术语 第10部分：采掘机械 |
China National Standards tin |
English PDF |
| GB/T 9248-2008 |
Methods of evaluating the performance of flowmeters for incompressible fluids 不可压缩流体流量计性能评定方法 |
China National Standards tin |
English PDF |
| GB/T 20186.2-2008 |
Secondary coating materials used for optical fiber - Part 2：Modified propylene resin 光纤用二次被覆材料 第2部分：改性聚丙烯 |
China National Standards tin |
English PDF |
| GB/T 17614.2-2008 |
Transmitters for use industrial-process control systems - Part 2: Methods for inspection and routine testing 工业过程控制系统用变送器 第2部分: 检查和例行试验方法 |
China National Standards tin |
English PDF |
| GB/T 4891-2008 |
Choice of sample size for estimating the average quality of a lot or process 为估计批(或过程)平均质量选择样本量的方法 |
China National Standards tin |
English PDF |
| GB/T 4889-2008 |
Statistical interpretation of data - Techniques of estimation and tests relating to means and variances 数据的统计处理和解释 正态分布均值和方差的估计与检验 |
China National Standards tin |
English PDF |
| GB/T 2828.2-2008 |
Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection 计数抽样检验程序 第2部分：按极限质量LQ检索的孤立批检验抽样方案 |
China National Standards tin |
English PDF |
| GB/T 22258-2008 |
Universal technical requirements of anti-counterfeiting labels 防伪标识通用技术条件 |
China National Standards tin |
English PDF |
| GB/T 16573-2008 |
Micrographics - Microfilming of documents on 16 mm and 35 mmsilver-gelatin type microfilm - Operating procedures 缩微摄影技术 在16mm和35mm银-明胶型 缩微胶片上拍摄文献的操作程序 |
China National Standards tin |
English PDF |
| GB/T 10061-2008 |
Screen plants - Codification for designating perforations 筛板筛孔的标记方法 |
China National Standards tin |
English PDF |
| GB/T 8171-2008 |
Test method for mechanical shock fragility rating of products using packaging cushioning materials 使用缓冲包装材料进行的产品机械冲击脆值试验方法 |
China National Standards tin |
English PDF |
| GB/T 8167-2008 |
Testing method of dynamic compression for packaging cushioning materials 包装用缓冲材料动态压缩试验方法 |
China National Standards tin |
English PDF |
| GB/T 7311-2008 |
Classification and editorial nominating method for packaging machinery 包装机械分类与型号编制方法 |
China National Standards tin |
English PDF |
| GB/T 5271.19-2008 |
Information technology - Vocabulary Part 19: Analog computing 信息技术 词汇 第19部分：模拟计算 |
China National Standards tin |
English PDF |
| GB/Z 22200-2008 |
Reliability test method for lower capacity alternating current contactors 小容量交流接触器可靠性试验方法 |
China National Standards tin |
English PDF |
| GB/T 22194-2008 |
Electrical installations in ships - Equipment - Transformers for power and lighting 船舶电气设备 设备 电力和照明变压器 |
China National Standards tin |
English PDF |
| GB/T 8170-2008 |
Rules of rounding off for numerical values & expression and judgement of limiting values 数值修约规则与极限数值的表示和判定 |
China National Standards tin |
English PDF |
| GB/T 8054-2008 |
Single sampling procedures and tables for Inspection having desired operating Characteristics by variables 计量标准型一次抽样检验程序及表 |
China National Standards tin |
English PDF |
| GB/T 5700-2008 |
Measurement methods for lighting 照明测量方法 |
China National Standards tin |
English PDF |
| GB/T 5699-2008 |
Method of daylighting measurements 采光测量方法 |
China National Standards tin |
English PDF |
| GB/T 17739.1-2008 |
Microfilming of technical drawings and other drawing office documents - Part 1: Operating procedures 技术图样与技术文件的缩微摄影 第1部分：操作程序 |
China National Standards tin |
English PDF |
| GB/T 17292-2008 |
Micrographics - Requirement on the quality of first generation silver - gelatin microforms 缩微摄影技术 第一代银-明胶型缩微品的质量要求 |
China National Standards tin |
English PDF |
| GB/T 13379-2008 |
Principles of visual ergonomics-the lighting of indoor work places 视觉工效学原则 室内工作场所照明 |
China National Standards tin |
English PDF |
| GB/T 13262-2008 |
Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming 不合格品百分数的计数标准型一次抽样检验程序及抽样表 |
China National Standards tin |
English PDF |
| GB/T 12454-2008 |
A method of evaluating the visual environment 视觉环境评价方法 |
China National Standards tin |
English PDF |
| GB/T 20002.2-2008 |
Drafting for special aspects in standards - Part 2: The needs of older persons and persons with disabilities 标准中特定内容的起草 第2部分：老年人和残疾人的需求 |
China National Standards tin |
English PDF |
| GB/T 16685-2008 |
Information technology - Office equipment - Printing devices Method for measuring throughput - Class 1 and Class 2 printers 信息技术 办公设备 打印设备 吞吐量的测量方法 1类和2类打印机 |
China National Standards tin |
English PDF |
| GB/T 14457.3-2008 |
Fragrance/Flavor substances - Method for determination of melting point 香料 熔点测定法 |
China National Standards tin |
English PDF |
| GB/T 7121.2-2008 |
The strength testing method and accepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method 农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分：后置式动态试验方法 |
China National Standards tin |
English PDF |
| GB/T 5184-2008 |
Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions 叉车 挂钩型货叉和货叉架 安装尺寸 |
China National Standards tin |
English PDF |
| GB/T 3229-2008 |
Assembly tools for screws and nuts - Drive ends for hand and machine operated screwdriver bits and connecting parts - Dimensions, torque testing 螺栓螺母用装配工具 手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards tin |
English PDF |
| GB/T 22166-2008 |
Non-calibrated round steel link lifting chain and chain slings - Use and maintenance 非校准起重圆环链和吊链 使用和维护 |
China National Standards tin |
English PDF |
| GB 16151.5-2008 |
Safety technical requirements for agricultural machinery operating - Part 5: trailer 农业机械运行安全技术条件 第5部分：挂车 |
China National Standards tin |
English PDF |
| GB 16151.12-2008 |
Technical requirements of operating safety for agricultural machinery Part 12：Grain combine-harvester 农业机械运行安全技术条件 第12部分：谷物联合收割机 |
China National Standards tin |
English PDF |
| GB 16151.1-2008 |
Technical requirements of operating safety for agricultural machinery - Part 1: Tractor 农业机械运行安全技术条件 第1部分：拖拉机 |
China National Standards tin |
English PDF |
| GB/T 15446-2008 |
Terminology relating to radiation processing dosimetry 辐射加工剂量学术语 |
China National Standards tin |
English PDF |
| GB/T 14057.1-2008 |
Decontamination of radioactively contaminated surfaces - Part 1: Method for testing and assessing the ease of decontamination 放射性污染表面去污 第1部分：试验与评价去污难易程度的方法 |
China National Standards tin |
English PDF |
| GB/T 13180-2008 |
G-M counter tubes for detecting X、γ radiation X、γ射线GM计数管 |
China National Standards tin |
English PDF |
| GB/T 12788-2008 |
Criteria for class 1E power systems for nuclear power generating stations 核电厂安全级电力系统准则 |
China National Standards tin |
English PDF |
| GB/T 11813-2008 |
Helium leak testing of nuclear fuel rod for PWR 压水堆燃料棒氦质谱检漏 |
China National Standards tin |
English PDF |
| GB/T 11810-2008 |
tin113 - Indium113m generator 锡113-铟113m发生器 |
China National Standards tin |
English PDF |
| GB/T 11809-2008 |
Test method of weld of fuel rod for PWR - Metallographic examination and radiographic testing 压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验 |
China National Standards tin |
English PDF |
| GB/T 13985-2008 |
Operating force and strength of camera 照相机操作力和强度 |
China National Standards tin |
English PDF |
| GB/T 9851.6-2008 |
Terminology of graphic technology - Part 6: Terms for permeographic printing 印刷技术术语 第6部分: 孔版印刷术语 |
China National Standards tin |
English PDF |
| GB/T 9851.5-2008 |
Terminology of graphic technology - Part 5: Terms for recess printing 印刷技术术语 第5部分: 凹版印刷术语 |
China National Standards tin |
English PDF |
| GB/T 9851.4-2008 |
Terminology of graphic technology - Part 4：Terms for planographic printing 印刷技术术语 第4部分: 平版印刷术语 |
China National Standards tin |
English PDF |
| GB/T 7707-2008 |
The intaglio prints for decorating 凹版装潢印刷品 |
China National Standards tin |
English PDF |
| GB/T 7706-2008 |
The relief prints for decorating 凸版装潢印刷品 |
China National Standards tin |
English PDF |
| GB/T 7705-2008 |
The offset lithographic prints for decorating 平版装潢印刷品 |
China National Standards tin |
English PDF |
| GB/T 13334-2008 |
Adjusting test chart for copying machine A3 复印机调试板 A3 |
China National Standards tin |
English PDF |
| GB/T 9234-2008 |
Power reciprocating pump 机动往复泵 |
China National Standards tin |
English PDF |
| GB/T 9069-2008 |
Determination of sound power level for noise emitted by reciprocating pump - Engineering method 往复泵噪声声功率级的测定 工程法 |
China National Standards tin |
English PDF |
| GB/T 22076-2008 |
Pneumatic fluid power - Cylindrical quick-action couplings - Plug connecting dimensions, specifications, application guidelines and testing 气动圆柱形快换接头 插头连接尺寸、技术要求、应用指南和试验 |
China National Standards tin |
English PDF |
| GB/T 22070-2008 |
Aqua-ammonia absorption refrigerating unit 氨水吸收式制冷机组 |
China National Standards tin |
English PDF |
| GB/T 13911-2008 |
Designation for metallic coating and chemical treatment 金属镀覆和化学处理标识方法 |
China National Standards tin |
English PDF |
| GB/T 13364-2008 |
Measurement of mechanical vibration for reciprocating pump 往复泵机械振动测试方法 |
China National Standards tin |
English PDF |
| GB/T 22150-2008 |
Relative timing of sound and vision for broadcasting 电视广播声音和图像的相对定时 |
China National Standards tin |
English PDF |
| GB/T 22125-2008 |
The operation and management regulations for the enterprises of marketing automobile parts 汽车配件营销企业经营管理规范 |
China National Standards tin |
English PDF |
| GB/T 9326.5-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 5: Pressure tanks 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第5部分: 压力供油箱 |
China National Standards tin |
English PDF |
| GB/T 9326.4-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 4: Joint 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第4部分: 接头 |
China National Standards tin |
English PDF |
| GB/T 9326.3-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 3: Sealing end 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第3部分: 终端 |
China National Standards tin |
English PDF |
| GB/T 9326.2-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 2：Oil-filled paper insulated, lead-sheathed cables for alternating voltages up to and including 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第2部分: 交流500kV及以下纸绝缘铅套充油电缆 |
China National Standards tin |
English PDF |
| GB/T 9326.1-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 1: Test 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第1部分: 试验 |
China National Standards tin |
English PDF |
| GB/T 8411.2-2008 |
Ceramic and glass insulating materials - Part 2: Methods of test 陶瓷和玻璃绝缘材料 第2部分：试验方法 |
China National Standards tin |
English PDF |
| GB/T 749-2008 |
Test method for determining capability of resisting sulfate corrode of cement 水泥抗硫酸盐侵蚀试验方法 |
China National Standards tin |
English PDF |
| GB/T 4109-2008 |
Insulated bushings for alternating voltages above 1 000V 交流电压高于1000V的绝缘套管 |
China National Standards tin |
English PDF |
| GB/T 2567-2008 |
Test methods for properties of resin casting boby 树脂浇铸体性能试验方法 |
China National Standards tin |
English PDF |
| GB/T 17795-2008 |
Glass wool thermal insulating products for building 建筑绝热用玻璃棉制品 |
China National Standards tin |
English PDF |
| GB/T 16911-2008 |
Code of dust control for cement producting 水泥生产防尘技术规程 |
China National Standards tin |
English PDF |
| GB/T 16777-2008 |
Test methods for building waterproofing coatings 建筑防水涂料试验方法 |
China National Standards tin |
English PDF |
| GB/T 18372-2008 |
Glass fibre fabric for ducting 玻璃纤维导风筒基布 |
China National Standards tin |
English PDF |
| GB/T 15738-2008 |
Test method for resistivity of conducting and antistatic fiber reinforced plastics 导电和抗静电纤维增强塑料电阻率试验方法 |
China National Standards tin |
English PDF |
| GB/T 15548-2008 |
General specification for three-phase synchronous generators driven by reciprocating internal combustion engine 往复式内燃机驱动的三相同步发电机通用技术条件 |
China National Standards tin |
English PDF |
| GB/T 15469.1-2008 |
Hydraulic turbines, storage pumps and pump-turbines cavitation pitting evaluation - part 1: cavitation pitting evaluation in reaction turbines 水轮机、蓄能泵和水泵水轮机空蚀评定 第1部分：反击式水轮机的空蚀评定 |
China National Standards tin |
English PDF |
| GB/T 12972.3-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 3：Trailing coalcutter cables with monitoring core and semiconducting screens for rated voltage of 0.66/1.14kV 矿用橡套软电缆 第3部分: 额定电压0.66/1.14kV 采煤机屏蔽监视加强型软电缆 |
China National Standards tin |
English PDF |
| GB/T 12954.1-2008 |
Testing methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives 建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法 |
China National Standards tin |
English PDF |
| GB/T 12666.3-2008 |
Test method on a single wire or cable under fire conditions - Part 3: Slanting specimen flame test 单根电线电缆燃烧试验方法 第3部分：倾斜燃烧试验 |
China National Standards tin |
English PDF |
| GB/T 3159-2008 |
Hydraulic universal testing machines 液压式万能试验机 |
China National Standards tin |
English PDF |
| GB/T 22137.2-2008 |
Valve positiongers for use in industrial-process control system - Part 2: Methods of evaluating the performance of intelligent value positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第2部分：气动输出智能阀门定位器性能评定方法 |
China National Standards tin |
English PDF |
| GB/T 22137.1-2008 |
Valve positiongers for use in industrial-process control system - Part 1: Methods of evaluating the performance of valve positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第1部分：气动输出阀门定位器性能评定方法 |
China National Standards tin |
English PDF |
| GB/T 22112-2008 |
Industrial process measurement and control instruments - Arrangement and marking of connecting terminals 工业自动化仪表 接线端子的排列和标志 |
China National Standards tin |
English PDF |
| GB/T 17614.1-2008 |
Transmitters for use in industrial-process control systems - Part 1: Methods of evaluating the performance 工业过程控制系统用变送器 第1部分: 性能评定方法 |
China National Standards tin |
English PDF |
| GB/T 17165-2008 |
Fuzzy control devices and systems Method of evaluating performance 模糊控制装置和系统性能评定方法 |
China National Standards tin |
English PDF |
| Find out:7708Items | To Page of: First -Previous-Next -Last | [50] [51] [52] [53] [54] [55] [56] |
+86-755-25831330
