China National Standards

China Die GB Standards List

  •  China "Die" GB Standards List:
    • Standard  Code Standard Title Standard Class Order
    GB/T 4937.19-2018 Semiconductor devices—Mechanical and climatic test methods—Part 19: Die shear strength
    半导体器件 机械和气候试验方法 第19部分：芯片剪切强度    		 China National Standards
    Die
    English PDF
    GB/T 36764-2018 Rubber compounding ingreDients—Silica, precipitated, hydrated—Determination of heavy metal content by inductively coupled plasma atomic emission spectrometric method
    橡胶配合剂 沉淀水合二氧化硅 电感耦合等离子体原子发射光谱仪测定重金属含量    		 China National Standards
    Die
    English PDF
    GB/T 36885-2018 Measure method for SOx emission of marine Diesel engine
    船用柴油机硫氧化物排放测量方法    		 China National Standards
    Die
    English PDF
    GB/T 36658-2018 Technical specification of marine Diesel-natural gas dual fuel engine
    船用柴油天然气双燃料发动机技术条件    		 China National Standards
    Die
    English PDF
    GB/T 36662-2018 Selective catalytic reduction exhaust treatment system of marine Diesel engine
    船用柴油机SCR排气后处理系统    		 China National Standards
    Die
    English PDF
    GB 17691-2018 Limits and measurement methods for emissions from Diesel fuelled heavy-duty vehicles（China VI）
    重型柴油车污染物排放限值及测量方法（中国第六阶段）    		 China National Standards
    Die
    English PDF
    GB/T 9911-2018 Measurement of airborne noise emitted by marine Diesel engine
    船用柴油机辐射的空气噪声测量方法    		 China National Standards
    Die
    English PDF
    GB/T 35893-2018 Determination of aluminium zirconium chloride hydroxide complexes, aluminium zirconium chloride hydroxide glycine complexes and aluminum chlorohydrate as antiperspirant active ingreDients in cosmetics
    化妆品中抑汗活性成分氯化羟锆铝配合物、氯化羟锆铝甘氨酸配合物和氯化羟铝的测定    		 China National Standards
    Die
    English PDF
    GB/T 35915-2018 Cosmetic ingreDients—Extract of pearl
    化妆品用原料 珍珠提取物    		 China National Standards
    Die
    English PDF
    GB/T 35956-2018 Detection and determination of N-nitrosoDiethanolamine (NDELA) in cosmetics—HPLC-MS-MS
    化妆品中N-亚硝基二乙醇胺（NDELA）的测定 高效液相色谱-串联质谱法    		 China National Standards
    Die
    English PDF
    GB/T 36032-2018 Press tools for tablets—Punches and Dies
    压片冲模 冲杆与中模    		 China National Standards
    Die
    English PDF
    GB/T 36089-2018 Acrylonitrile-butaDiene rubber(NBR)
    丙烯腈-丁二烯橡胶(NBR)    		 China National Standards
    Die
    English PDF
    GB/T 35010.2-2018 Semiconductor Die products—Part 2: Exchange data formats
    半导体芯片产品 第2部分：数据交换格式    		 China National Standards
    Die
    English PDF
    GB/T 35010.6-2018 Semiconductor Die products—Part 6: Requirements for concerning thermal simulation
    半导体芯片产品 第6部分：热仿真要求    		 China National Standards
    Die
    English PDF
    GB/T 35010.8-2018 Semiconductor Die products—Part8: EXPRESS model schema for data exchange
    半导体芯片产品 第8部分：数据交换的EXPRESS格式    		 China National Standards
    Die
    English PDF
    GB/T 35010.5-2018 Semiconductor Die products—Part 5：Requirements for concerning electrical simulation
    半导体芯片产品 第5部分：电学仿真要求    		 China National Standards
    Die
    English PDF
    GB/T 35010.7-2018 Semiconductor Die products—Part 7: XML schema for data exchange
    半导体芯片产品 第7部分：数据交换的XML格式    		 China National Standards
    Die
    English PDF
    GB/T 35010.1-2018 Semiconductor Die products—Part 1：Requirements for procurement and use
    半导体芯片产品 第1部分：采购和使用要求    		 China National Standards
    Die
    English PDF
    GB/T 35010.3-2018 Semiconductor Die products—Part 3: Guide for handling, packing and storage
    半导体芯片产品 第3部分：操作、包装和贮存指南    		 China National Standards
    Die
    English PDF
    GB/T 35010.4-2018 Semiconductor Die products—Part 4: Requirements for die users and suppliers
    半导体芯片产品 第4部分：芯片使用者和供应商要求    		 China National Standards
    Die
    English PDF
    GB/T 17737.102-2018 Coaxial communication cables—Part 1-102: Electrical test methods—Test for insulation resistance of cable Dielectric
    同轴通信电缆 第1-102部分：电气试验方法 电缆介质绝缘电阻试验    		 China National Standards
    Die
    English PDF
    GB/T 17737.105-2018 Coaxial communication cables—Part 1-105: Electrical test methods—Test for withstand voltage of cable Dielectric
    同轴通信电缆 第1-105部分：电气试验方法 电缆介质的耐电压试验    		 China National Standards
    Die
    English PDF
    GB/T 34894-2017 Micro-electromechanical system technology—Measuring method for strain graDient measurements of MEMS microstructures using an optical interferometer
    微机电系统（MEMS）技术 基于光学干涉的MEMS微结构应变梯度测量方法    		 China National Standards
    Die
    English PDF
    GB/T 34819-2017 Cosmetic ingreDients—Methylisothiazolinone
    化妆品用原料 甲基异噻唑啉酮    		 China National Standards
    Die
    English PDF
    GB/T 34820-2017 Cosmetic ingreDients—Glycol distearate
    化妆品用原料 乙二醇二硬脂酸酯    		 China National Standards
    Die
    English PDF
    GB/T 34685-2017 Acrylonitrile-butaDiene rubber(NBR)—Evaluation procedure
    丙烯腈-丁二烯橡胶（NBR） 评价方法    		 China National Standards
    Die
    English PDF
    GB/T 34665-2017 Measurement method of Dielectric dissipation factor of electric machinery coil/winding insulation
    电机线圈/绕组绝缘介质损耗因数测量方法    		 China National Standards
    Die
    English PDF
    GB/T 27021.1-2017 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 1: Requirements
    合格评定 管理体系审核认证机构要求 第1部分：要求    		 China National Standards
    Die
    English PDF
    GB/T 34698-2017 Rubber compounding ingreDients—Determination of water soluble substance of silica，precipitated，hydrated—Electrolytic conductivity method
    橡胶配合剂 沉淀水合二氧化硅水可溶物含量的测定 电导率法    		 China National Standards
    Die
    English PDF
    GB/T 34480-2017 Aluminum alloys Die forgings, hand forgings, and rolled ring forgings from spray-formed billet
    喷射成形锭坯锻制的铝合金锻件    		 China National Standards
    Die
    English PDF
    GB/T 34519-2017 Specifications of amusement device kidDie rocking category
    摇摆类游艺机技术条件    		 China National Standards
    Die
    English PDF
    GB/T 34389-2017 Stamping Dies—Sliding plates
    冲模 导滑板    		 China National Standards
    Die
    English PDF
    GB/T 4678.4-2017 Diecasting dies—Components—Part 4: Square guide pillars
    压铸模 零件 第4部分：方导柱    		 China National Standards
    Die
    English PDF
    GB/T 34580-2017 Standard test method for measurement of lubricant generated insoluble color boDies in in-service turbine oils—Membrane patch colorimetry
    运行涡轮机油中不溶有色物质的测定方法 膜片比色法    		 China National Standards
    Die
    English PDF
    GB/T 6883-2017 Cemented carbide sintering body for wire, bar or tube drawing Dies—Dimensions
    线、棒、管拉模用硬质合金烧结品 尺寸    		 China National Standards
    Die
    English PDF
    GB/T 34374-2017 Stamping Dies—L-shaped guide plates
    冲模 L形导板    		 China National Standards
    Die
    English PDF
    GB/T 4678.2-2017 Diecasting dies—Components—Part 2: Round inserts
    压铸模 零件 第2部分：圆形镶块    		 China National Standards
    Die
    English PDF
    GB/T 4679-2017 Diecasting dies—Components—Specifications
    压铸模 零件 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 4678.8-2017 Diecasting dies—Components—Part 8: Ejector plate
    压铸模 零件 第8部分：推板    		 China National Standards
    Die
    English PDF
    GB/T 13747.25-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 25：Determination of niobium content—2-(5-bromo-2-pyridylazo)-5-Diethylam inophenol spectrophotometry and inductively coupled plasma atomic emission spectrometry
    锆及锆合金化学分析方法 第25部分：铌量的测定 5-Br-PADAP分光光度法和电感耦合等离子体原子发射光谱法    		 China National Standards
    Die
    English PDF
    GB/T 4678.9-2017 Diecasting dies—Components—Part 9: Ejector guide pillar
    压铸模 零件 第9部分：推板导柱    		 China National Standards
    Die
    English PDF
    GB/T 4678.5-2017 Diecasting dies—components—Part 5: Round guide pillar
    压铸模 零件 第5部分：圆导柱    		 China National Standards
    Die
    English PDF
    GB/T 8844-2017 Diecasting dies—Specifications
    压铸模 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 4678.6-2017 Diecasting dies—Components—Part 6: Headed guide bush
    压铸模 零件 第6部分：带头导套    		 China National Standards
    Die
    English PDF
    GB/T 4678.1-2017 Diecasting dies—Components—Part 1: Die plates
    压铸模 零件 第1部分：模板    		 China National Standards
    Die
    English PDF
    GB/T 4678.7-2017 Diecasting dies—Components—Part 7: Straight guide bush
    压铸模 零件 第7部分：直导套    		 China National Standards
    Die
    English PDF
    GB/T 4678.10-2017 Diecasting dies—Components—Part 10: Ejector guide bush
    压铸模 零件 第10部分：推板导套    		 China National Standards
    Die
    English PDF
    GB/T 4678.3-2017 Diecasting dies—Components—Part 3: Rectangular inserts
    压铸模 零件 第3部分：矩形镶块    		 China National Standards
    Die
    English PDF
    GB/T 4678.19-2017 Diecasting dies—Components—Part 19: Locating element
    压铸模 零件 第19部分：定位元件    		 China National Standards
    Die
    English PDF
    GB/T 4678.11-2017 Diecasting dies—Components—Part 11: Ejector pin
    压铸模 零件 第11部分：推杆    		 China National Standards
    Die
    English PDF
    GB/T 34151-2017 Stamping Dies—Guide plates—U-and V-blocks
    冲模 导板 U形和V形块    		 China National Standards
    Die
    English PDF
    GB 25199-2017 B5 Diesel fuels
    B5柴油    		 China National Standards
    Die
    English PDF
    GB/T 34100-2017 Test method for determination of total sulfur in light hydrocarbons，spark ignition engine fuel ,Diesel engine fuel, and engine oil—Ultraviolet fluorescence method
    轻质烃及发动机燃料和其他油品中总硫含量的测定 紫外荧光法    		 China National Standards
    Die
    English PDF
    GB/T 8845-2017 Dies and moulds—Terminology
    模具 术语    		 China National Standards
    Die
    English PDF
    GB/T 33879-2017 Multi-way precision Die forgings—General specification
    多向精密模锻件 通用技术条件    		 China National Standards
    Die
    English PDF
    GB/T 33922-2017 Wafer level test methods for MEMS piezoresistive pressure-sensitive Die performances
    MEMS压阻式压力敏感芯片性能的圆片级试验方法    		 China National Standards
    Die
    English PDF
    GB/T 33823-2017 Aluminum alloy Die forgings for control arms of passenger vehicles
    乘用车控制臂用铝合金模锻件    		 China National Standards
    Die
    English PDF
    GB 22757.1-2017 Energy consumption label for light-duty vehicles—Part 1: For gasoline and Diesel vehicles
    轻型汽车能源消耗量标识 第1部分：汽油和柴油汽车    		 China National Standards
    Die
    English PDF
    GB/T 33801-2017 Ships and marine technology—Ship recycling management systems—Requirements for boDies providing audit and certification of ship recycling management
    船舶与海上技术 拆船管理体系 对拆船管理审核和认证机构的要求    		 China National Standards
    Die
    English PDF
    GB/T 33551-2017 Portable small-type Diesel engine-pumps direct-linking unit—Specification for performance evaluation
    轻小型柴油机-泵直联机组 性能评价规范    		 China National Standards
    Die
    English PDF
    GB/T 23507.3-2017 Criterion for electrical equipment for oil drilling rig—Part 3: The Diesel generating set for electric drilling rig
    石油钻机用电气设备规范 第3部分：电动钻机用柴油发电机组    		 China National Standards
    Die
    English PDF
    GB/T 33485-2017 Large yachts—Diesel engines for main propulsion and essential auxiliaries—Safety requirements
    大型游艇 主辅柴油机 安全要求    		 China National Standards
    Die
    English PDF
    GB/T 35771-2017 Determination of dimethyl sulfate and Diethyl sulfate in cosmetics—Gas chromatography-mass spectrometry method
    化妆品中硫酸二甲酯和硫酸二乙酯的测定 气相色谱-质谱法    		 China National Standards
    Die
    English PDF
    GB/T 35137-2017 The high-frequency reciprocating rig for Diesel fuel assessment of lubricity
    柴油润滑性评定用高频往复试验机    		 China National Standards
    Die
    English PDF
    GB/T 13822-2017 Test specimens for nonferrous Diecasting alloys
    压铸有色合金试样    		 China National Standards
    Die
    English PDF
    GB/T 21871-2017 Rubber compounding ingreDients—Symbols and abbreviated terms
    橡胶配合剂 符号及缩略语    		 China National Standards
    Die
    English PDF
    GB/T 35696-2017 Requirements for marine medium voltage AC Diesel generator set and control system
    船舶交流中压柴油发电机组及控制系统要求    		 China National Standards
    Die
    English PDF
    GB/T 35280-2017 Information security technology—Requirement and code of conduct for security testing boDies of information technology products
    信息安全技术 信息技术产品安全检测机构条件和行为准则    		 China National Standards
    Die
    English PDF
    GB/T 18952-2017 Rubber compounding ingreDients—Sulfur and methods of test
    橡胶配合剂 硫磺及试验方法    		 China National Standards
    Die
    English PDF
    GB/T 27021.2-2017 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 2: Competence requirements for auditing and certification of environmental management systems
    合格评定 管理体系审核认证机构要求 第2部分：环境管理体系审核认证能力要求    		 China National Standards
    Die
    English PDF
    GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,Dielectric tests and external clearances in air
    电力变压器 第3部分:绝缘水平、绝缘试验和外绝缘空气间隙    		 China National Standards
    Die
    English PDF
    GB/T 35348-2017 Diesel engines—Fuel filters—Method for evaluating fuel/water separation efficiency
    柴油机 燃油滤清器 油/水分离效率的评定方法    		 China National Standards
    Die
    English PDF
    GB/T 35320-2017 Hazard and operability stuDies (HAZOP studies)—Application guide
    危险与可操作性分析（HAZOP分析） 应用指南    		 China National Standards
    Die
    English PDF
    GB/T 22003-2017 Conformity assessment—Food safety management systems—Requirements for boDies providing audit and certification of food safety management systems
    合格评定 食品安全管理体系 审核与认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 35363-2017 Diesel fuel and petrol filters for vehicle engines—The test method for filtration efficiency and contaminant retention capacity—Method of particle counting
    汽车发动机柴油滤清器和汽油滤清器 滤清效率和纳污容量的测定方法 颗粒计数法    		 China National Standards
    Die
    English PDF
    GB/T 26494-2016 Aluminum alloys extruded profiles used for structural material of railway vehicle carboDies
    轨道交通车辆结构用铝合金挤压型材    		 China National Standards
    Die
    English PDF
    GB/T 3185-2016 Zinc oxide(InDiect method)
    氧化锌（间接法）    		 China National Standards
    Die
    English PDF
    GB 19147-2016 Automobile Diesel fuels
    车用柴油    		 China National Standards
    Die
    English PDF
    GB/T 33400-2016 Determination of total contamination in middle distillates, Diesel fuels andDetermination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
    中间馏分油、柴油及脂肪酸甲酯中总污染物含量测定法    		 China National Standards
    Die
    English PDF
    GB/T 12361-2016 Steel Die forgings—General specification
    钢质模锻件 通用技术条件    		 China National Standards
    Die
    English PDF
    GB/T 33194-2016 Railway applications—Structural requirements of railway vehicle boDies
    铁路应用 机车车辆车体结构要求    		 China National Standards
    Die
    English PDF
    GB/T 33192-2016 General technical specification for Diesel engine of locomotive
    内燃机车用柴油机通用技术条件    		 China National Standards
    Die
    English PDF
    GB/T 12362-2016 Steel Die forgings—Tolerance and machining allowance
    钢质模锻件 公差及机械加工余量    		 China National Standards
    Die
    English PDF
    GB/T 33216-2016 Steel open Die forgings on hammer—Classification of complexity and equivalent coefficient
    锤上钢质自由锻件 复杂程度分类及折合系数    		 China National Standards
    Die
    English PDF
    GB/T 33306-2016 Cosmetic ingreDients—D-panthenol
    化妆品用原料 D-泛醇    		 China National Standards
    Die
    English PDF
    GB/T 33212-2016 Steel open Die forgings on hammer—General specifications
    锤上钢质自由锻件 通用技术条件    		 China National Standards
    Die
    English PDF
    GB/T 33298-2016 Standard test method for determining cetane number of Diesel fuels—Airflow regulation
    柴油十六烷值的测定 风量调节法    		 China National Standards
    Die
    English PDF
    GB 31604.44-2016 National Food Safety Standard-Food contact materials and products-Determination of migration amounts of ethylene glycol and Diethylene glycol
    食品安全国家标准 食品接触材料及制品 乙二醇和二甘醇迁移量的测定    		 China National Standards
    Die
    English PDF
    GB 31604.12-2016 National Food Safety Standard-Food contact materials and products-DETERMINATION OF 1,3-BUTADieNE AND DETERMINATION OF MIGRATION
    食品安全国家标准 食品接触材料及制品 1,3-丁二烯的测定和迁移量的测定    		 China National Standards
    Die
    English PDF
    GB/T 27021.3-2016 Conformity assessment—Requirements for boDies providing audit and certification of management systems—Part 3: Competence requirements for auditing and certification of quality management systems
    合格评定 管理体系审核认证机构的要求 第3部分：质量管理体系审核认证的能力要求    		 China National Standards
    Die
    English PDF
    GB/T 25067-2016 Information technology—Security techniques—Requirements for boDies providing audit and certification of information security management systems
    信息技术 安全技术 信息安全管理体系审核和认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 23656-2016 Rubber compounding ingreDients—Determination of surface area for silica，precipitated，hydrated—CTAB method
    橡胶配合剂 沉淀水合二氧化硅比表面积的测定 CTAB法    		 China National Standards
    Die
    English PDF
    GB/T 32859-2016 Detergent additive for Diesel oil
    柴油清净剂    		 China National Standards
    Die
    English PDF
    GB/T 32698-2016 Rubber compounding ingreDients—Determination of particle size distribution for silica，precipitated，hydrated—Laser diffraction
    橡胶配合剂 沉淀水合二氧化硅粒度分布的测定 激光衍射法    		 China National Standards
    Die
    English PDF
    GB/T 32678-2016 Rubber compounding ingreDients—Highly dispersible silica，precipitated，hydrated
    橡胶配合剂 高分散沉淀水合二氧化硅    		 China National Standards
    Die
    English PDF
    GB/T 32663-2016 Tools for moulding—Tool specification sheet for Diecasting dies
    成型模 压铸模订货技术规范    		 China National Standards
    Die
    English PDF
    GB/T 27020-2016 Conformity assessment—Requirements for the operation of various types of boDies performing inspection
    合格评定 各类检验机构的运作要求    		 China National Standards
    Die
    English PDF
    GB/T 32499-2016 Connecting devices—Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium boDied clamping units
    连接器件 任何材料的夹紧件用铝线的连接器件及铝基夹紧件用铜线的连接器件    		 China National Standards
    Die
    English PDF
    GB/T 11297.9-2015 Test method for Dielectric tangent of loss angle of pyroelectric materials
    热释电材料介质损耗角正切tanδ的测试方法    		 China National Standards
    Die
    English PDF
    GB/T 11297.11-2015 Test method for Dielectric constant of pyroelectric materials
    热释电材料介电常数的测试方法    		 China National Standards
    Die
    English PDF
    GB/T 32249-2015 Aluminum and aluminum-alloy Die forgings, hand forgings and rolled ring forgings—General specification
    铝及铝合金模锻件、自由锻件和轧制环形锻件 通用技术条件    		 China National Standards
    Die
    English PDF
    GB/T 32115-2015 Determination of ethylene glycol and Diethylene glycol in oral care products
    口腔护理产品中乙二醇与二甘醇的测定方法    		 China National Standards
    Die
    English PDF
    GB/T 32084-2015 Diesel-powered air start unit
    飞机地面柴油机气源机组    		 China National Standards
    Die
    English PDF
    GB 5009.88-2014 National Food Safety Standard-Determination of Dietary fiber in foods
    食品安全国家标准 食品中膳食纤维的测定    		 China National Standards
    Die
    English PDF
    GB/T 6346.11-2015 Fixed capacitors for use in electronic equipment—Part 11: Sectional specification—―Fixed polyethylene-terephthalate film Dielectric metal foil d.c. capacitors
    电子设备用固定电容器 第11部分：分规范 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 6346.1101-2015 Fixed capacitors for use in electronic equipment—Part 11-1: Blank detail specification—Fixed polyethylene-terephthalate film Dielectric metal foil d.c.capacitors—Assessment level EZ
    电子设备用固定电容器 第11-1部分：空白详细规范 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器 评定水平EZ    		 China National Standards
    Die
    English PDF
    GB/T 31838.1-2015 Solid insulating materials—Dielectric and resistive properties—Part 1: General
    固体绝缘材料 介电和电阻特性 第1部分：总则    		 China National Standards
    Die
    English PDF
    GB/Z 31813-2015 Technical guidelines for efficacy stuDies of feed material and feed additive in livestock and poultry target animal
    饲料原料和饲料添加剂畜禽靶动物有效性评价试验技术指南    		 China National Standards
    Die
    English PDF
    GB/Z 31812-2015 Technical guidelines for efficacy stuDies of feed material and feed additive in aquaculture target animals
    饲料原料和饲料添加剂水产靶动物有效性评价试验技术指南    		 China National Standards
    Die
    English PDF
    GB/T 17737.313-2015 Coaxial communication cables—Part 1-313: Mechanical test methods—Adhesion of Dielectric and sheath
    同轴通信电缆 第1-313部分：机械试验方法 介质和护套的附着力    		 China National Standards
    Die
    English PDF
    GB/T 27065-2015 Conformity assessment—Requirements for boDies certifying products,processes and services
    合格评定 产品、过程和服务认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 5594.4-2015 Test methods for properties of structure ceramic used in electronic components and device—Part 4: Test method for permittivity and Dielectric loss angle tangent value
    电子元器件结构陶瓷材料性能测试方法 第4部分：介电常数和介质损耗角正切值的测试方法    		 China National Standards
    Die
    English PDF
    GB/T 31403-2015 Plastics—Acrylonitrile-butaDiene-styrene/poly (methyl methacrylate) alloy
    塑料 丙烯腈-丁二烯-苯乙烯/聚甲基丙烯酸甲酯合金    		 China National Standards
    Die
    English PDF
    GB/T 30648.5-2015 Paints and varnishes—Determination of resistance to liquids—Part 5: Temperature-graDient oven methods
    色漆和清漆 耐液体性的测定 第5部分：采用具有温度梯度的烘箱法    		 China National Standards
    Die
    English PDF
    GB/T 20828-2015 BioDiesel blend stock (BD100) for diesel engine fuels
    柴油机燃料调合用生物柴油（BD100）    		 China National Standards
    Die
    English PDF
    GB 252-2015 General Diesel fuels
    普通柴油    		 China National Standards
    Die
    English PDF
    GB 25199-2015 BioDiesel fuel blends (B5)
    生物柴油调合燃料（B5)    		 China National Standards
    Die
    English PDF
    GB 29987-2014 National Food Safety Standard-Gum base and its ingreDients
    食品安全国家标准 食品添加剂 胶基及其配料    		 China National Standards
    Die
    English PDF
    GB/T 31090-2014 Diesel component from direct coal liquefaction
    煤炭直接液化柴油组分油    		 China National Standards
    Die
    English PDF
    GB/T 29613.2-2014 Rubber―Analysis by pyrolytic gas-chromatographic methods―Part 2: Determination of styrene/butaDiene/isoprene ratio
    橡胶 裂解气相色谱分析法 第2部分：苯乙烯/丁二烯/异戊二烯比率的测定    		 China National Standards
    Die
    English PDF
    GB/T 14837.2-2014 Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 2: Acrylonitrile-butaDiene and halobutyl rubbers
    橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第2部分：丙烯腈-丁二烯橡胶和卤化丁基橡胶    		 China National Standards
    Die
    English PDF
    GB/T 31038-2014 General technical condition for high voltage Diesel-generating sets
    高电压柴油发电机组通用技术条件    		 China National Standards
    Die
    English PDF
    GB/T 14837.1-2014 Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 1：ButaDiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
    橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第1部分：丁二烯橡胶、乙烯-丙烯二元和三元共聚物、异丁烯-异戊二烯橡胶、异戊二烯橡胶、苯乙烯-丁二烯橡胶    		 China National Standards
    Die
    English PDF
    GB/T 31270.20-2014 Test guidelines on environmental safety assessment for chemical pesticides—Part 20: Livestock short-term Dietary toxicity test
    化学农药环境安全评价试验准则 第20部分：家畜短期饲喂毒性试验    		 China National Standards
    Die
    English PDF
    GB/T 27024-2014 Conformity assessment—General requirements for boDies operating certification of persons
    合格评定 人员认证机构通用要求    		 China National Standards
    Die
    English PDF
    GB/T 27309-2014 Conformity assessment—Requirements for boDies providing certification of energy management system
    合格评定 能源管理体系认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 8657-2014 Styrene-butaDiene rubber, raw―Determination of soap and organic-acid content
    苯乙烯-丁二烯生橡胶 皂和有机酸含量的测定    		 China National Standards
    Die
    English PDF
    GB/T 30919-2014 Styrene-butaDiene rubber, raw―Determination of N-nitrosamines content by gas chromatography―Thermo energy analyzer method
    苯乙烯-丁二烯生橡胶 N-亚硝基胺化合物的测定 气相色谱-热能分析法    		 China National Standards
    Die
    English PDF
    GB/T 30914-2014 Styrene-isoprene-butaDiene rubber (SIBR)―Determination of the microstructure
    苯乙烯-异戊二烯-丁二烯橡胶（SIBR）微观结构的测定    		 China National Standards
    Die
    English PDF
    GB/T 24797.3-2014 Film for wrapping rubber bales―Part 3: Ethylene-propylene-Diene rubber (EPDM)，acrylonitrilebutadiene rubber (NBR)，hydrogenated nitrile-butadiene rubber(HNBR)，acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
    橡胶包装用薄膜 第3部分：乙烯-丙烯-二烯烃橡胶（EPDM）、丙烯腈-丁二烯橡胶（NBR）、氢化丙烯腈-丁二烯橡胶（HNBR）、乙烯基丙烯酸酯橡胶（AEM）和丙烯酸酯橡胶（ACM）    		 China National Standards
    Die
    English PDF
    GB/T 13290-2014 Propylene and butaDiene for industrial use―Sampling in the liquid phase
    工业用丙烯和丁二烯液态采样法    		 China National Standards
    Die
    English PDF
    GB/T 30933-2014 Determination of Diethylamino hydroxybenzoyl hexyl benzoate as Sunscreen agent in Cosmetics―High performance liquid chromatography
    化妆品中防晒剂二乙氨基羟苯甲酰基苯甲酸己酯的测定 高效液相色谱法    		 China National Standards
    Die
    English PDF
    GB 20891-2014 Limits and measurement methods for exhaust pollutants from Diesel engines of non-road mobile machinery(CHINA Ⅲ、Ⅳ)
    非道路移动机械用柴油机排气污染物排放限值及测量方法（中国第三、四阶段）    		 China National Standards
    Die
    English PDF
    GB/T 30498-2014 Small craft—Permanently installed petrol and Diesel fuel tanks
    小艇 永久性安装的汽油和柴油燃油柜    		 China National Standards
    Die
    English PDF
    GB/T 30218-2013 Fine blanking Dies―Specifications
    精冲模 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 14853.1-2013 Rubber compounding ingreDients—Pelletized carbon black—Part 1：Determination of pour density
    橡胶用造粒炭黑 第1部分：倾注密度的测定    		 China National Standards
    Die
    English PDF
    GB/T 14853.6-2013 Rubber compounding ingreDients―Pelletized carbon black―Part 6：Determination of individual pellet crushing strength
    橡胶用造粒炭黑 第6部分：单个颗粒破碎强度的测定    		 China National Standards
    Die
    English PDF
    GB/T 14853.5-2013 Rubber compounding ingreDients—Pelletized carbon black—Part 5：Determination of pellet size distribution
    橡胶用造粒炭黑 第5部分：颗粒尺寸分布的测定    		 China National Standards
    Die
    English PDF
    GB/T 14853.4-2013 Rubber compounding ingreDients—Pelletized carbon black—Part 4：Determination of mass strength
    橡胶用造粒炭黑 第4部分：堆积强度的测定    		 China National Standards
    Die
    English PDF
    GB/T 16467-2013 Fixed capacitors for use in electronic equipment―Part 19-1: Blank detail specification—Fixed metallized polyethylene-terephthalate film Dielectric surface mount d.c.capacitors―Assessment level EZ
    电子设备用固定电容器 第19-1部分：空白详细规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 评定水平EZ    		 China National Standards
    Die
    English PDF
    GB/T 15448-2013 Fixed capacitors for use in electronic equipment—Part 19: Sectional specification—Fixed metallized polyethylene-terephthalate film Dielectric surface mount d.c.capacitors
    电子设备用固定电容器 第19部分:分规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 14580-2013 Fixed capacitors for use in electronic equipment—Part 17-1：Blank detail specification—Fixed metallized polypropylene film Dielectric a.c. and pulse capacitors—Assessment level E and EZ
    电子设备用固定电容器 第17-1部分：空白详细规范 金属化聚丙烯膜介质交流和脉冲固定电容器评定水平E和EZ    		 China National Standards
    Die
    English PDF
    GB/T 14579-2013 Fixed capacitors for use in electronic equipment—Part 17：Sectional specification—Fixed metallized polypropylene film Dielectric a.c. and pulse capacitors
    电子设备用固定电容器 第17部分:分规范 金属化聚丙烯膜介质交流和脉冲固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 10189-2013 Fixed capacitors for use in electronic equipment—Part 13-1：Blank detail specification—Fixed polypropylene film Dielectric metal foil d.c.capacitors—Assessment level E and EZ
    电子设备用固定电容器 第13-1部分：空白详细规范 金属箔式聚丙烯膜介质直流固定电容器 评定水平E和EZ    		 China National Standards
    Die
    English PDF
    GB/T 10188-2013 Fixed capacitors for use in electronic equipment—Part 13：Sectional specification—Fixed polypropylene film Dielectric metal foil d.c.capacitors
    电子设备用固定电容器 第13部分：分规范 金属箔式聚丙烯膜介质直流固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 30350-2013 Television auDience measurement guidelines
    电视收视率调查准则    		 China National Standards
    Die
    English PDF
    GB 13432-2013 National Food Safety Standard Food Labeling of Prepackaged Special Diet
    食品安全国家标准 预包装特殊膳食用食品标签    		 China National Standards
    Die
    English PDF
    GB/Z 16935.2-2013 Insulation coordination for equipment within low-voltage systems―Part 2-1: Application guide-Explanation of the application of the IEC 60664 series, dimensioning example and Dielectric testing
    低压系统内设备的绝缘配合 第2-1部分：应用指南 GB/T 16935系列应用解释,定尺寸示例及介电试验    		 China National Standards
    Die
    English PDF
    GB 29987-2013 National Food Safety Standard Food Additive Identification Allyl disulfide Food Additive Identification Styrene butaDiene rubber
    食品安全国家标准 食品添加剂 丁苯橡胶    		 China National Standards
    Die
    English PDF
    GB 29972-2013 National Food Safety Standard Food Additive Identification Allyl disulfide Food Additive Identification Acetaldehyde Diethyl acetal
    食品安全国家标准 食品添加剂 乙醛二乙缩醛    		 China National Standards
    Die
    English PDF
    GB/T 29914-2013 Oxidation catalyst for Diesel vehicle exhaust purification
    柴油车排气净化氧化催化剂    		 China National Standards
    Die
    English PDF
    GB/T 29720-2013 Coal based fischer - Tropsch synthetic Diesel component oil
    煤基费托合成 柴油组分油    		 China National Standards
    Die
    English PDF
    GB/T 27201-2013 Credit evaluation criteria for certification boDies
    认证机构信用评价准则    		 China National Standards
    Die
    English PDF
    GB/T 7404.2-2013 Lead-acid battery for locomotives and rolling stock - Part 2：Valve regulated lead-acid for Diesel locomotives
    轨道交通车辆用铅酸蓄电池 第2部分：内燃机车用阀控式铅酸蓄电池    		 China National Standards
    Die
    English PDF
    GB/T 29533-2013 Compiling method of technological norm for steel Die forging material consumption
    钢质模锻件材料消耗工艺定额编制方法    		 China National Standards
    Die
    English PDF
    GB/T 29532-2013 General specification for steel precision hot Die forgings
    钢质精密热模锻件 通用技术条件    		 China National Standards
    Die
    English PDF
    GB 29518-2013 Diesel engines NOx reduction agent - Aqueous urea solution (AUS 32)
    柴油发动机氮氧化物还原剂 尿素水溶液（AUS 32）    		 China National Standards
    Die
    English PDF
    GB 19147-2013 Automobile Diesel fuels
    车用柴油(V)    		 China National Standards
    Die
    English PDF
    GB/T 8545-2012 Die forgings of aluminium and aluminium alloy - Dimensional tolerance and machining allowance
    铝及铝合金模锻件的尺寸偏差及加工余量    		 China National Standards
    Die
    English PDF
    GB/T 3884.9-2012 Methods for chemical analysis of copper concentrates - Part 9: Determination of arsenic and bismuth contents - Hydride generation- atomic fluorescence spectrometry method The potassium bromate titration method and The silver Diethyl dithiocarbamate photom
    铜精矿化学分析方法 第9部分：砷和铋量的测定 氢化物发生-原子荧光光谱法、溴酸钾滴定法和二乙基二硫代氨基甲酸银分光光度法    		 China National Standards
    Die
    English PDF
    GB/T 29092-2012 Magnesium and magnesium alloy terms and definitions of Die-castings defects
    镁及镁合金压铸缺陷术语    		 China National Standards
    Die
    English PDF
    GB/T 28961-2012 Automotive Diesel - Two-stage fuel filters for Compression-ignition engines - Mounting and connecting dimensions
    汽车柴油机 双级燃油滤清器 安装和连接尺寸    		 China National Standards
    Die
    English PDF
    GB/T 28960-2012 Automotive Diesel - Heads for fuel filters with horizontal flange - Mounting and connecting dimensions
    汽车柴油机 具有水平安装面的旋装式燃油滤清器滤座 安装和连接尺寸    		 China National Standards
    Die
    English PDF
    GB/T 28959-2012 Automotive Diesel - Heads for fuel filters with vertical flange- Mounting and connecting dimensions
    汽车柴油机 具有垂直安装面的燃油滤清器滤座 安装和连接尺寸    		 China National Standards
    Die
    English PDF
    GB/T 28953-2012 Automotive Diesel - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions
    汽车柴油机 旋装式燃油滤清器 安装和连接尺寸    		 China National Standards
    Die
    English PDF
    GB/T 9414.2-2012 Maintainability of equipment - Part 2: Maintainability requirements and stuDies during the design and development phase
    维修性 第2部分：设计和开发阶段维修性要求与研究    		 China National Standards
    Die
    English PDF
    GB/T 29306.2-2012 Recommended methods for the determination of the Dielectric properties of insulating materials at frequencies above 300 MHz - Part 2 : Resonance methods
    绝缘材料在300 MHz以上频率下介电性能测定方法 第2部分：谐振法    		 China National Standards
    Die
    English PDF
    GB/T 29306.1-2012 Recommended methods for the determination of the Dielectric properties of insulating materials at frequencies above 300 MHz - Part 1：General
    绝缘材料在300 MHz以上频率下介电性能测定方法 第1部分：总则    		 China National Standards
    Die
    English PDF
    GB/T 28793-2012 Technical requirements of fuel saving for fishing vessel Diesel engines
    渔业船舶柴油机节油技术要求    		 China National Standards
    Die
    English PDF
    GB/T 28790-2012 Technical requirements and measuring methods of fuel saving devices for Diesel engines of fishing vessel
    渔业船舶柴油机节油装置技术条件及检测方法    		 China National Standards
    Die
    English PDF
    GB/T 7333-2012 Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film Dielectric d.c.capacitors - Assessment levels E and EZ
    电子设备用固定电容器 第2-1部分：空白详细规范 金属化聚乙烯对苯二甲酸酯膜介质 直流固定电容器 评定水平E和EZ    		 China National Standards
    Die
    English PDF
    GB/T 5969-2012 Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification：Fixed capacitor of ceramic Dielectric,Class 2 - Assessment level EZ
    电子设备用固定电容器 第9-1部分:空白详细规范 2类瓷介固定电容器 评定水平 EZ    		 China National Standards
    Die
    English PDF
    GB/T 10190-2012 Fixed capacitors for use in electronic equipment - Part 16: Sectional specification：Fixed metallized polypropylene film Dielectric d.c.capacitors
    电子设备用固定电容器 第16部分: 分规范 金属化聚丙烯膜介质直流固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 10186-2012 Fixed capacitors for use in electronic equipment - Part 7-1: Blank detail spicification - Fixed polystyrene film Dielectric metal foil d.c. capacitors - Assessment level E
    电子设备用固定电容器 第7-1部分：空白详细规范 金属箔式聚苯乙烯膜介质直流固定电容器 评定水平E    		 China National Standards
    Die
    English PDF
    GB/T 10185-2012 Fixed capacitors for use in electric equipment - Part 7: Sectional specification Fixed polystyrene film Dielectric metal foil d.c. capacitors
    电子设备用固定电容器 第7部分：分规范 金属箔式聚苯乙烯膜介质直流固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 28688-2012 Low pressure Die casting machine - Technical requirements
    低压铸造机 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 28687-2012 Numecical control Die casting machines
    数控压铸机    		 China National Standards
    Die
    English PDF
    GB/T 28601-2012 Rubber compounding ingreDients - Silica,precipitated,hydrated - Determination of gelatin content
    橡胶配合剂 沉淀水合二氧化硅 凝胶含量的测定    		 China National Standards
    Die
    English PDF
    GB/T 28600-2012 Rubber compounding ingreDients - Silica, precipitated, hydrated -Determination of average pore diameter
    橡胶配合剂 沉淀水合二氧化硅 平均孔径的测定    		 China National Standards
    Die
    English PDF
    GB/T 28483-2012 Environmentally friendly rubber latex for carpet application--Carboxylated styrene-butaDiene rubber latex and limitation of hazardous substances
    地毯用环保胶乳 羧基丁苯胶乳及有害物质限量    		 China National Standards
    Die
    English PDF
    GB 28239-2012 Limits and measurement methods for non-road Diesel engine specific fuel consumption and specific oil consumption
    非道路用柴油机燃料消耗率和机油消耗率限值及试验方法    		 China National Standards
    Die
    English PDF
    GB/T 15046-2011 Fatty Diethanol amide
    脂肪酰二乙醇胺    		 China National Standards
    Die
    English PDF
    GB/T 7332-2011 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film Dielectric d.c.capacitors
    电子设备用固定电容器 第2部分：分规范 金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 5968-2011 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification:Fixed capacitors of ceramic Dielectric,Class 2
    电子设备用固定电容器 第9部分：分规范 2类瓷介固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 5967-2011 Fixed capacitors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed capacitor of ceramic Dielectric,Class 1 - Assessment level EZ
    电子设备用固定电容器 第8-1部分：空白详细规范 1类瓷介固定电容器 评定水平 EZ    		 China National Standards
    Die
    English PDF
    GB/T 5966-2011 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic Dielectric,Class 1
    电子设备用固定电容器 第8部分：分规范 1类瓷介固定电容器    		 China National Standards
    Die
    English PDF
    GB/T 10191-2011 Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification：Fixed metallized polypropylene film Dielectric d.c.capacitors - Assessment levels E and EZ
    电子设备用固定电容器 第16-1部分：空白详细规范 金属化聚丙烯膜介质直流固定电容器 评定水平E和EZ    		 China National Standards
    Die
    English PDF
    GB/T 27926.2-2011 Financial services - Universal financial industry message scheme - Part 2: Roles and responsibilities of registration boDies
    金融服务 金融业通用报文方案 第2部分：注册机构的角色及职责    		 China National Standards
    Die
    English PDF
    GB/T 27308-2011 Conformity assessment - Requirements for boDies providing audit and certification of IT service management systems
    合格评定　信息技术服务管理体系认证机构要求    		 China National Standards
    Die
    English PDF
    GB/T 27561-2011 Styrene-butaDiene-styrene block copolymers（SBS）adhesives
    苯乙烯-丁二烯-苯乙烯嵌段共聚物（SBS）胶粘剂    		 China National Standards
    Die
    English PDF
    GB/T 27523-2011 Cigarettes - Determination of volatile organic compounds (1,3-butaDiene, isoprene, acrylonitrile, benzene, toluene) in mainstream smoke - GC-MS method
    卷烟 主流烟气中挥发性有机化合物(1，3-丁二烯、异戊二烯、丙烯腈、苯、甲苯)的测定 气相色谱-质谱联用法    		 China National Standards
    Die
    English PDF
    GB/T 10327-2011 Reference fuel specification for Diesel engine performance test
    发动机检测用标准轻柴油技术条件    		 China National Standards
    Die
    English PDF
    GB/T 26728-2011 Efficient single cylinder Diesel engines - Requirements
    高效单缸柴油机 技术条件    		 China National Standards
    Die
    English PDF
    GB/T 26639-2011 General specifications for open Die forgings on hydraulic press
    液压机上钢质自由锻件 通用技术条件    		 China National Standards
    Die
    English PDF
    GB/T 26638-2011 Classification of complexity and equivalent coefficient of open Die forgings on hydraulic press
    液压机上钢质自由锻件 复杂程度分类及折合系数    		 China National Standards
    Die
    English PDF
    GB 26488-2011 Magnesium alloys Die casting safety criterion
    镁合金压铸安全生产规范    		 China National Standards
    Die
    English PDF
    GB 26509-2011 Garden machinery - Pedestrian-controlled lawnmower with a petrol（Diesel）engine - Safety requirements and testing methods
    园林机械 以汽（柴）油机为动力的步进式草坪割草机 安全技术要求和试验方法    		 China National Standards
    Die
    English PDF
    GB/T 26495-2011 Magnesium alloy Die casting for steering wheel armature
    镁合金压铸转向盘骨架坯料    		 China National Standards
    Die
    English PDF
    GB/T 26494-2011 Aluminium alloys extruded profiles used for structural material of railway vehcle carboDies
    轨道列车车辆结构用铝合金挤压型材    		 China National Standards
    Die
    English PDF
    GB/T 26528-2011 Styrene butaDiene styrene(SBS) modified bitumen for waterproof
    防水用弹性体(SBS)改性沥青    		 China National Standards
    Die
    English PDF

    Find out:500Items   |  To Page of: First -Previous-Next -Last  | 1 2 3

    　

      sales@gbstandards.org 
    Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  GBstandards.org Copyright  2001-2026 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.gbstandards.org
    China National Standards