Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 5773-2016 |
The method of performance test for positive displacement refrigerant coMPRessors 容积式制冷剂压缩机性能试验方法 |
China National Standards MPR |
 English PDF |
| GB/T 18430.2-2016 |
Water chilling (heat pump) packages using the vapor coMPRession cycle—Part 2: Water chilling (heat pump) packages for household and similar application 蒸气压缩循环冷水（热泵）机组 第2部分：户用及类似用途的冷水（热泵）机组 |
China National Standards MPR |
English PDF |
| GB/T 2679.8-2016 |
Paper and board—Determination of coMPRessive strength（Ring crush method） 纸和纸板 环压强度的测定 |
China National Standards MPR |
English PDF |
| GB/T 33002-2016 |
Thermal insulating products for building applications—Determination of deformation under specified coMPRessive load and temperature conditions 建筑用绝热制品 在规定压缩载荷和温度条件下变形的测定 |
China National Standards MPR |
English PDF |
| GB/T 33018.1-2016 |
Energy-saving technical specification for carbon enterprise—Part 1: IMPRegnation 炭素企业节能技术规范 第1部分：浸渍 |
China National Standards MPR |
English PDF |
| GB/T 33200-2016 |
Specification of constraction and management for coMPRehensive management of public security center 社会治安综合治理 综治中心建设与管理规范 |
China National Standards MPR |
English PDF |
| GB/T 32983-2016 |
Thermal insulating products for building applications—Determination of coMPRessive creep 建筑用绝热制品 压缩蠕变性能的测定 |
China National Standards MPR |
English PDF |
| GB/T 32977-2016 |
Hot rolled iMPRoved corrosion resisting steel sections 改善耐蚀性能热轧型钢 |
China National Standards MPR |
English PDF |
| GB/T 32778-2016 |
General guide for coMPRehensive utilization of pepper abandoning 胡椒废弃物综合利用导则 |
China National Standards MPR |
English PDF |
| GB 51102-2016 |
Code for design of coMPRessed natural gas（CNG）supply station 压缩天然气供应站设计规范 |
China National Standards MPR |
English PDF |
| GB 50289-2016 |
Code for urban engineering pipelines coMPRehensive planning 城市工程管线综合规划规范 |
China National Standards MPR |
English PDF |
| GB/T 32343-2015 |
Technical specification of natural secondary forest iMPRovement and cultivation in northeast China 东北地区天然次生林改培技术规程 |
China National Standards MPR |
English PDF |
| GB/T 13277.4-2015 |
CoMPRessed air—Part 4: Test methods for solid particle content 压缩空气 第4部分：固体颗粒测量方法 |
China National Standards MPR |
English PDF |
| GB/T 13277.3-2015 |
CoMPRessed air—Part 3: Test methods for measurement of humidity 压缩空气 第3部分：湿度测量方法 |
China National Standards MPR |
English PDF |
| GB/T 13277.2-2015 |
CoMPRessed air—Part 2: Test methods for oil aerosol content 压缩空气 第2部分：悬浮油含量测量方法 |
China National Standards MPR |
English PDF |
| GB/T 31000-2015 |
Data standard for coMPRehensive treatment of public security 社会治安综合治理基础数据规范 |
China National Standards MPR |
English PDF |
| GB/T 23934-2015 |
Hot formed helical coMPRession springs—Technical requirement 热卷圆柱螺旋压缩弹簧 技术条件 |
China National Standards MPR |
English PDF |
| GB/T 15487-2015 |
Methods of flow measurement for displacement coMPRessor 容积式压缩机流量测量方法 |
China National Standards MPR |
English PDF |
| GB/T 13928-2015 |
Reciprocating minitype air coMPRessors 微型往复活塞空气压缩机 |
China National Standards MPR |
English PDF |
| GB/T 13279-2015 |
Stationary reciprocating air coMPRessors for general use 一般用固定的往复活塞空气压缩机 |
China National Standards MPR |
English PDF |
| GB/T 32127-2015 |
Guide for monitoring effect and coMPRehensive benefit evaluation of demand response 需求响应效果监测与综合效益评价导则 |
China National Standards MPR |
English PDF |
| GB 7956.6-2015 |
Fire fighting vehicles—Part 6：CoMPRessed air foam system fire fighting vehicle 消防车 第6部分：压缩空气泡沫消防车 |
China National Standards MPR |
English PDF |
| GB/T 31975-2015 |
Technical requirements of coMPRessed air for respiratory protection 呼吸防护用压缩空气技术要求 |
China National Standards MPR |
English PDF |
| GB/T 31930-2015 |
Metallic materials—Ductility testing—CoMPRession test for porous and cellular metals 金属材料 延性试验 多孔状和蜂窝状金属压缩试验方法 |
China National Standards MPR |
English PDF |
| GB/T 31922-2015 |
Hot-rolled steel sheets and strips of higher yield strength with iMPRoved formability 改善成形性热轧高屈服强度钢板和钢带 |
China National Standards MPR |
English PDF |
| GB/T 31751-2015 |
CoMPRessed white tea 紧压白茶 |
China National Standards MPR |
English PDF |
| GB/T 22531-2015 |
Operation rules of coMPRehensive protection and cultivation of wild ginseng 野山参人工繁衍护育操作规程 |
China National Standards MPR |
English PDF |
| GB/T 31600-2015 |
Guideline for the agriculture coMPRehensive standardization 农业综合标准化工作指南 |
China National Standards MPR |
English PDF |
| GB/T 31513-2015 |
Guidelines for environmentally conscious design of industrial coMPRehensive utilization equipments 工业综合利用设备环境化设计导则 |
China National Standards MPR |
English PDF |
| GB/T 31511-2015 |
Guide for the implementation of environmentally conscious design of industrial coMPRehensive utilization equipments 工业综合利用设备环境化设计实施指南 |
China National Standards MPR |
English PDF |
| GB/T 31510-2015 |
Economic operation of refrigerated display cabinet systems with remote refrigerant coMPRessor condensing units 远置式压缩冷凝机组冷藏陈列柜系统经济运行 |
China National Standards MPR |
English PDF |
| GB/T 7759.1-2015 |
Rubber,vulcanized or thermoplastic—Determination of coMPRession set—Part 1: At ambient or elevated temperatures 硫化橡胶或热塑性橡胶 压缩永久变形的测定 第1部分：在常温及高温条件下 |
China National Standards MPR |
English PDF |
| GB 30692-2014 |
Rules for the iMPRovement of safety of existing escalators and moving walks 提高在用自动扶梯和自动人行道安全性的规范 |
China National Standards MPR |
English PDF |
| GB/T 7759.2-2014 |
Rubber,vulcanized or thermoplastic―Determination of coMPRession set―Part 2:At low temperatures 硫化橡胶或热塑性橡胶 压缩永久变形的测定 第2部分：在低温条件下 |
China National Standards MPR |
English PDF |
| GB/T 15765-2014 |
Hermetic motor-coMPRessors for room conditioners 房间空气调节器用全封闭型电动机―压缩机 |
China National Standards MPR |
English PDF |
| GB/T 31295-2014 |
The core to wind turbine blade―Determination of dimensional stability at elevated temperatures with flexural load and with coMPRessive load 风电叶片用芯材 弯曲载荷和压缩载荷下高温尺寸稳定性的测定 |
China National Standards MPR |
English PDF |
| GB/T 13465.3-2014 |
Test method of impermeable graphite materials―Part 3: CoMPRessive strength 不透性石墨材料试验方法 第3部分：抗压强度 |
China National Standards MPR |
English PDF |
| GB/T 31178-2014 |
CoMPRehensive evaluation of children and adolescents development 儿童青少年发育水平的综合评价 |
China National Standards MPR |
English PDF |
| GB/T 31138-2014 |
CoMPRessed hydrogen dispenser for vehicles 汽车用压缩氢气加气机 |
China National Standards MPR |
English PDF |
| GB/T 16739.2-2014 |
Certification requirements for motor vehicle maintenance and repair enterprise―Part 2: For coMPRehensive current repair and maintenance and repair of special items 汽车维修业开业条件 第2部分：汽车综合小修及专项维修业户 |
China National Standards MPR |
English PDF |
| GB/T 31184-2014 |
Technical requirements of manufacturing consulting service for centrifugal coMPRessors 离心式压缩机制造监理技术要求 |
China National Standards MPR |
English PDF |
| GB/T 1981.6-2014 |
Varnishes used for electrical insulation―Part 6：Environment-friendly water or emulsion based iMPRegnating varnishes 电气绝缘用漆 第6部分：环保型水性浸渍漆 |
China National Standards MPR |
English PDF |
| GB/T 30968.4-2014 |
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 4: Test method of open-hole coMPRessive strength 聚合物基复合材料层合板开孔/受载孔性能试验方法 第4部分：开孔压缩强度试验方法 |
China National Standards MPR |
English PDF |
| GB/T 30968.2-2014 |
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 2: Test method of filled-hole tension and coMPRession 聚合物基复合材料层合板开孔/受载孔性能试验方法 第2部分：充填孔拉伸和压缩试验方法 |
China National Standards MPR |
English PDF |
| GB/T 30833-2014 |
Pneumatic fluid power―CoMPRessible fluids consumed by equipment―Power determination and measurement of compressible air 气压传动 设备消耗的可压缩流体 压缩空气功率的表示及测量 |
China National Standards MPR |
English PDF |
| GB/T 10870-2014 |
The methods of performance test for water chilling (heat pump) packages using the vaper coMPRession cycle 蒸气压缩循环冷水(热泵)机组性能试验方法 |
China National Standards MPR |
English PDF |
| GB/T 30709-2014 |
Standard test method for coMPRessibility and recovery of laminated composite gasket materials 层压复合垫片材料压缩率和回弹率试验方法 |
China National Standards MPR |
English PDF |
| GB/T 13480-2014 |
Thermal insulating products for building applications―Determination of coMPRession behaviour 建筑用绝热制品 压缩性能的测定 |
China National Standards MPR |
English PDF |
| GB/T 30718-2014 |
CoMPRessed hydrogen surface vehicle refueling connection devices 压缩氢气车辆加注连接装置 |
China National Standards MPR |
English PDF |
| GB/T 7631.9-2014 |
Lubricants,industrial oils and related products (class L)-Classification―Part 9: Family D(CoMPRessors) 润滑剂、工业用油和有关产品（L类）的分类 第9部分：D组(压缩机) |
China National Standards MPR |
English PDF |
| GB 50029-2014 |
Code for design of coMPRessed air station 压缩空气站设计规范 |
China National Standards MPR |
English PDF |
| GB/T 30475.2-2013 |
Filters for coMPRessed air― Test methods―Part 2: Oil vapours 压缩空气过滤器 试验方法 第2部分:油蒸气 |
China National Standards MPR |
English PDF |
| GB/T 30475.1-2013 |
Filters for coMPRessed air―Test methods―Part 1: Oil aerosols 压缩空气过滤器 试验方法 第1部分：悬浮油 |
China National Standards MPR |
English PDF |
| GB/T 30202.3-2013 |
Test method for granular activated carbon from coal for desulfurization and denitration process―Part3: Abrasive resistance and coMPRession strength 脱硫脱硝用煤质颗粒活性炭试验方法 第3部分：耐磨强度、耐压强度 |
China National Standards MPR |
English PDF |
| GB/T 30355-2013 |
General guide for coMPRehensive utilization of sisal 龙舌兰剑麻综合利用导则 |
China National Standards MPR |
English PDF |
| GB/T 29780-2013 |
Hermetic motor-coMPRessors for household and similar application heat pump water heater 家用和类似用途热泵热水器用全封闭型电动机-压缩机 |
China National Standards MPR |
English PDF |
| GB/T 29723.3-2013 |
Grade and limit of major process energy consumption for coal mine - Part 3: Air coMPRessor system 煤矿主要工序能耗等级和限值 第3部分：空气压缩系统 |
China National Standards MPR |
English PDF |
| GB/T 9833.9-2013 |
CoMPRessed tea - Part 9: Qing zhuan tea 紧压茶 第9部分：青砖茶 |
China National Standards MPR |
English PDF |
| GB/T 9833.8-2013 |
CoMPRessed tea - Part 8: Mi zhuan tea 紧压茶 第8部分：米砖茶 |
China National Standards MPR |
English PDF |
| GB/T 9833.7-2013 |
CoMPRessed tea - Part 7: Jin jian tea 紧压茶 第7部分：金尖茶 |
China National Standards MPR |
English PDF |
| GB/T 9833.6-2013 |
CoMPRessed tea - Part 6: Jin tea 紧压茶 第6部分：紧茶 |
China National Standards MPR |
English PDF |
| GB/T 9833.5-2013 |
CoMPRessed tea - Part 5: Tuo tea 紧压茶 第5部分：沱茶 |
China National Standards MPR |
English PDF |
| GB/T 9833.4-2013 |
CoMPRessed tea - Part 4: Kang zhuan tea 紧压茶 第4部分：康砖茶 |
China National Standards MPR |
English PDF |
| GB/T 9833.3-2013 |
CoMPRessed tea - Part 3: Fu zhuan tea 紧压茶 第3部分：茯砖茶 |
China National Standards MPR |
English PDF |
| GB/T 9833.2-2013 |
CoMPRessed tea - Part 2: Hei zhuan tea 紧压茶 第2部分：黑砖茶 |
China National Standards MPR |
English PDF |
| GB/T 9833.1-2013 |
CoMPRessed tea - Part 1: Hua zhuan tea 紧压茶 第1部分：花砖茶 |
China National Standards MPR |
English PDF |
| GB/T 16903.2-2013 |
Rules for the presentation of graphical symbols for use on graphical signs - Part 2: Methods for testing coMPRehensibility 标志用图形符号表示规则 第2部分：理解度测试方法 |
China National Standards MPR |
English PDF |
| GB/T 29363-2012 |
Water chiller with the vapor coMPRession cycle for nuclear power plant 核电厂用蒸气压缩循环冷水机组 |
China National Standards MPR |
English PDF |
| GB/T 29030-2012 |
Positive displacement CO2 refrigerant coMPRessor(unit) 容积式CO2制冷压缩机(组) |
China National Standards MPR |
English PDF |
| GB/T 1481-2012 |
Metallic powders (excluding powders for hardmetals) - Determination of coMPRessibility in uniaxial compression 金属粉末(不包括硬质合金粉末)在单轴压制中压缩性的测定 |
China National Standards MPR |
English PDF |
| GB/T 28961-2012 |
Automotive diesel - Two-stage fuel filters for CoMPRession-ignition engines - Mounting and connecting dimensions 汽车柴油机 双级燃油滤清器 安装和连接尺寸 |
China National Standards MPR |
English PDF |
| GB/T 28949-2012 |
Inlet air cleaning equipment for internal combustion engines and coMPRessors - Performance testing 内燃机和空气压缩机用进气空气滤清器 性能试验 |
China National Standards MPR |
English PDF |
| GB/T 10893.1-2012 |
CoMPRessed air dryers - Part 1：Specifications and testing 压缩空气干燥器 第1部分：规范与试验 |
China National Standards MPR |
English PDF |
| GB/T 18205-2012 |
CoMPRehensive appraisement for health in schools 学校卫生综合评价 |
China National Standards MPR |
English PDF |
| GB/T 16630-2012 |
Lubricants for refrigeration coMPRessors 冷冻机油 |
China National Standards MPR |
English PDF |
| GB/T 28414-2012 |
Structural section steels with iMPRoved seismie resistance 抗震结构用型钢 |
China National Standards MPR |
English PDF |
| GB/T 28545-2012 |
Hydraulic turbines, storage pumps and pump-turbines - Guideline for rehabilitation and performance iMPRovement 水轮机、蓄能泵和水泵水轮机更新改造和性能改善导则 |
China National Standards MPR |
English PDF |
| GB/T 28484-2012 |
General specification for coMPRession and expansion equipment of electrophones 电鸣乐器压缩与扩展类音效装置通用技术条件 |
China National Standards MPR |
English PDF |
| GB 17258-2011 |
Steel cylinders for the on-board storage of coMPRessed natural gas as a fuel for automotive vehicles 汽车用压缩天然气钢瓶 |
China National Standards MPR |
English PDF |
| GB/T 27942-2011 |
Small capacity scroll coMPRessor for automotive air condition 汽车空调用小排量涡旋压缩机 |
China National Standards MPR |
English PDF |
| GB/T 27940-2011 |
Single-stage positive displacement refrigerant coMPRessors parallel unit for commercial refrigeration application 制冷用容积式单级制冷压缩机并联机组 |
China National Standards MPR |
English PDF |
| GB/T 27797.8-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 8: CoMPRession moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分：SMC及BMC模塑 |
China National Standards MPR |
English PDF |
| GB/T 27797.3-2011 |
Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet coMPRession moulding 纤维增强塑料 试验板制备方法 第3部分：湿法模塑 |
China National Standards MPR |
English PDF |
| GB/T 27883-2011 |
Economical operation for displacement air coMPRessor system 容积式空气压缩机系统经济运行 |
China National Standards MPR |
English PDF |
| GB/T 27876-2011 |
Technical specification for the maintenance of coMPRessed natural gas vehicle 压缩天然气汽车维护技术规范 |
China National Standards MPR |
English PDF |
| GB/T 17747.2-2011 |
Natural gas - Calculation of coMPRession factor - Part 2: Calculation using molar-composition analysis 天然气压缩因子的计算 第2部分：用摩尔组成进行计算 |
China National Standards MPR |
English PDF |
| GB/T 27937.5-2011 |
MPR publication - Part 5: Basic management rules MPR出版物 第5部分：基本管理规范 |
China National Standards MPR |
English PDF |
| GB/T 27937.4-2011 |
MPR publication - Part 4: Requirements and inspecting methods for MPR code symbol printing quality MPR出版物 第4部分：MPR码符号印制质量要求及检验方法 |
China National Standards MPR |
English PDF |
| GB/T 27937.3-2011 |
MPR publication - Part 3: General rules of production MPR出版物 第3部分：通用制作规范 |
China National Standards MPR |
English PDF |
| GB/T 27937.2-2011 |
MPR publication - Part 2: Specification of MPR code symbols MPR出版物 第2部分：MPR码符号规范 |
China National Standards MPR |
English PDF |
| GB/T 27937.1-2011 |
MPR publication - Part 1: Enconding rule of MPR code MPR出版物 第1部分：MPR码编码规则 |
China National Standards MPR |
English PDF |
| GB/T 27908-2011 |
Performance iMPRovement of management systems - Guidelines for procedures and methodology for continual improvement 管理体系绩效改进 持续改进的程序和方法指南 |
China National Standards MPR |
English PDF |
| GB/T 17747.3-2011 |
Natural gas - Calculation of coMPRession factor - Part 3: Calculation using physical properties 天然气压缩因子的计算 第3部分：用物性值进行计算 |
China National Standards MPR |
English PDF |
| GB/T 17747.1-2011 |
Natural gas - Calculation of coMPRession factor - Part 1: Introduction and guidelines 天然气压缩因子的计算 第1部分：导论和指南 |
China National Standards MPR |
English PDF |
| GB/T 28033-2011 |
Methods of coMPRehensive evaluation for prints quality of monochrome laser printer 单色激光打印机印品质量综合评价方法 |
China National Standards MPR |
English PDF |
| GB/T 26921-2011 |
The guide of design optimization for motor systems（fans,pumps,air coMPRessors） 电机系统（风机、泵、空气压缩机）优化设计指南 |
China National Standards MPR |
English PDF |
| GB/T 26967-2011 |
Oil injected single screw air coMPRessor for general use 一般用喷油单螺杆空气压缩机 |
China National Standards MPR |
English PDF |
| GB/T 26962-2011 |
Specifications for high-frequency electromagnetic field coMPRehensive water treatment device 高频电磁场综合水处理器技术条件 |
China National Standards MPR |
English PDF |
| GB/T 26749-2011 |
Carbon fiber - Determination of tensile properties of resin-iMPRegnated yarn 碳纤维 浸胶纱拉伸性能的测定 |
China National Standards MPR |
English PDF |
| GB/T 26780-2011 |
The safety requirement of fuel system for coMPRessed natural gas vehicle in the collision 压缩天然气汽车燃料系统碰撞安全要求 |
China National Standards MPR |
English PDF |
| GB/T 16560-2011 |
Deck decoMPRession chamber 甲板减压舱 |
China National Standards MPR |
English PDF |
| GB 50672-2011 |
Code for process design of coMPRehensive sewage treatment for iron and steel enterprises 钢铁企业综合污水处理厂工艺设计规范 |
China National Standards MPR |
English PDF |
| GB/T 26281-2010 |
Calculating methods for heat balance, heat efficiency and coMPRehensive energy consumption of cement rotary kiln 水泥回转窑热平衡、热效率、综合能耗计算方法 |
China National Standards MPR |
English PDF |
| GB 4706.17-2010 |
Household and similar electrical appliances - Safety - Particular requirements for motor-coMPRessors 家用和类似用途电器的安全 电动机-压缩机的特殊要求 |
China National Standards MPR |
English PDF |
| GB 4706.102-2010 |
Household and similar electrical appliances - Safety - Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or coMPRessor 家用和类似用途电器的安全 带嵌装或远置式制冷剂冷凝装置或压缩机的商用制冷器具的特殊要求 |
China National Standards MPR |
English PDF |
| GB/T 26181-2010 |
Hermetic motor-coMPRessors for household and similar heat pump water heater using CO2 refrigerant 家用和类似用途CO2制冷剂热泵热水器用全封闭型电动机-压缩机 |
China National Standards MPR |
English PDF |
| GB/T 26127-2010 |
CoMPRessed coalbed methane as vehicle fuel 车用压缩煤层气 |
China National Standards MPR |
English PDF |
| GB/T 25861-2010 |
Water-source high temperature heat pumps using the vapor coMPRession cycle 蒸气压缩循环水源高温热泵机组 |
China National Standards MPR |
English PDF |
| GB/T 5923-2010 |
Test methods of fuel filter for automotive coMPRession ignition engines 汽车柴油机燃油滤清器试验方法 |
China National Standards MPR |
English PDF |
| GB/T 25753.2-2010 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of coMPRession ratio of the zero throughput 真空技术 罗茨真空泵性能测量方法 第2部分：零流量压缩比的测量 |
China National Standards MPR |
English PDF |
| GB/T 25751-2010 |
CoMPRession gas spring technical specification 压缩气弹簧技术条件 |
China National Standards MPR |
English PDF |
| GB/T 25630-2010 |
TurbocoMPRessors - Performance test code 透平压缩机 性能试验规程 |
China National Standards MPR |
English PDF |
| GB/T 8190.9-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from coMPRession ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards MPR |
English PDF |
| GB/T 8190.10-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from coMPRession ignition engines operating under transient conditions 往复式内燃机 排放测量 第10部分：压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程 |
China National Standards MPR |
English PDF |
| GB/T 25360-2010 |
The reciprocating piston natural gas coMPRessor for the vehicle gas station 汽车加气站用往复活塞天然气压缩机 |
China National Standards MPR |
English PDF |
| GB/T 25359-2010 |
Petroleum and natural gas industries - Packaged reciprocating gas coMPRessors 石油及天然气工业用集成撬装往复压缩机 |
China National Standards MPR |
English PDF |
| GB/T 25358-2010 |
Packaged rotary oil-free air coMPRessors for petroleum and natural gas industries 石油及天然气工业用集装型回转无油空气压缩机 |
China National Standards MPR |
English PDF |
| GB/T 25357-2010 |
Petroleum, petrochemical and natural gas industries - Process positive-displacement rotary-type coMPRessors 石油、石化及天然气工业流程用容积式回转压缩机 |
China National Standards MPR |
English PDF |
| GB/T 25283-2010 |
Specification for coMPRehensive exploration and evaluation of mineral resources+(No.1 modification sheet) 矿产资源综合勘查评价规范+(第1号修改单) |
China National Standards MPR |
English PDF |
| GB/T 25270-2010 |
Rubber and plastics test equipment - Tensile,flexural and coMPRession types(constant rate of traverse) - Specification 橡胶塑料的拉伸、屈挠和压缩试验设备（恒速移动型） 技术要求 |
China National Standards MPR |
English PDF |
| GB/T 25183-2010 |
Paste for coMPRessive strength test of wall brick 砌墙砖抗压强度试验用净浆材料 |
China National Standards MPR |
English PDF |
| GB 25131-2010 |
Safety requirements for water chillers (heat pump) using the vapor coMPRession cycle 蒸气压缩循环冷水（热泵）机组 安全要求 |
China National Standards MPR |
English PDF |
| GB/T 18024.7-2010 |
Graphical symbols for the technical documentation of coal mine machinery - Part 7：Graphical symbols for coMPRessor, fan and pump 煤矿机械技术文件用图形符号 第7部分：压气机、通风机和泵图形符号 |
China National Standards MPR |
English PDF |
| GB/T 13930-2010 |
Methods for the measurement of volume flow of gas of water-ring vacuum pumps and coMPRessors 水环真空泵和水环压缩机 气量测定方法 |
China National Standards MPR |
English PDF |
| GB/T 13929-2010 |
Methods of testing for water-ring vacuum pumps and coMPRessors 水环真空泵和水环压缩机 试验方法 |
China National Standards MPR |
English PDF |
| GB/T 25044-2010 |
General request of the preparation equipment used in coMPRessive strength test of wall bricks 砌墙砖抗压强度试样制备设备通用要求 |
China National Standards MPR |
English PDF |
| GB 50275-2010 |
Code for construction and acceptance of fan,coMPRessor and pump installation 风机、压缩机、泵安装工程施工及验收规范 |
China National Standards MPR |
English PDF |
| GB 24804-2009 |
Rules for the iMPRovement of safety of existing lifts 提高在用电梯安全性的规范 |
China National Standards MPR |
English PDF |
| GB/T 24732-2009 |
General technical conditions for support (coMPRession) sheave of passenger ropeway 客运索道托(压)索轮通用技术条件 |
China National Standards MPR |
English PDF |
| GB/T 24600-2009 |
Disposal of sludge from municipal wastewater treatment plant - Quality of sludge used in land iMPRovement 城镇污水处理厂污泥处置 土地改良用泥质 |
China National Standards MPR |
English PDF |
| GB/T 24649.3-2009 |
Air coMPRessor of pneumatic braking system of tractor-trailers - Specifications 拖拉机挂车气制动系统空气压缩机 技术条件 |
China National Standards MPR |
English PDF |
| GB/T 24624-2009 |
Insulated bushings - Guide for the interpretation of dissolved gas analysis(DGA)in bushings where oil is the iMPRegnating medium of the main insulation(generally paper) 绝缘套管 油为主绝缘（通常为纸）浸渍介质套管中溶解气体分析（DGA）的判断导则 |
China National Standards MPR |
English PDF |
| GB/T 12467.2-2009 |
Quality reqirements for fusion welding of metallic materials - Part 2: CoMPRehensive quality requirements 金属材料熔焊质量要求 第2部分：完整质量要求 |
China National Standards MPR |
English PDF |
| GB/T 24442.2-2009 |
Textiles - Determination of coMPRession property - Part 2: Constant rate method 纺织品 压缩性能的测定 第2部分：等速法 |
China National Standards MPR |
English PDF |
| GB/T 24442.1-2009 |
Textiles - Determination of coMPRession property - Part 1: Constant method 纺织品 压缩性能的测定 第1部分：恒定法 |
China National Standards MPR |
English PDF |
| GB/Z 19031-2009 |
Quality management systems - Guidelines for process iMPRovements in health service organizations 质量管理体系 医疗服务组织过程改进指南 |
China National Standards MPR |
English PDF |
| GB/T 1431-2009 |
Carbon materials-determination of the coMPRessive strength 炭素材料耐压强度测定方法 |
China National Standards MPR |
English PDF |
| GB 24163-2009 |
Periodic inspection and evaluation of steel cylinder for the storage of coMPRessed natural gas for stations 站用压缩天然气钢瓶定期检验与评定 |
China National Standards MPR |
English PDF |
| GB 17926-2009 |
CoMPRessed natural gas cylinder valve for vehicle 车用压缩天然气瓶阀 |
China National Standards MPR |
English PDF |
| GB 24162-2009 |
Periodic inspection and evaluation of hoop wrapped fibre reinforced composite gas cylinders with metal liners of coMPRessed natural gas for automotive vehicles 汽车用压缩天然气金属内胆纤维环缠绕气瓶定期检验与评定 |
China National Standards MPR |
English PDF |
| GB 24160-2009 |
Hoop-wrapped composite cylinders with steel liner for the on-board storage of coMPRessed natural gas as a fuel for automotive vehicles 车用压缩天然气钢质内胆环向缠绕气瓶 |
China National Standards MPR |
English PDF |
| GB/T 14575-2009 |
Textiles - Tests for colour fastness - CoMPRehensive colour fastness 纺织品 色牢度试验 综合色牢度 |
China National Standards MPR |
English PDF |
| GB/T 5019.7-2009 |
Insulating materials based on mica - Part 7: Glass-backed and film-backed mica paper with an epoxy resin binder for vacuum pressure iMPRegnation(VPI) 以云母为基的绝缘材料 第7部分：真空压力浸渍（VPI）用玻璃布及薄膜补强环氧树脂粘合云母带 |
China National Standards MPR |
English PDF |
| GB/T 1981.5-2009 |
Varnishes used for electrical insulation - Part 5: Energy-saving fast curing melamine alkyd iMPRegnating varnishes 电气绝缘用漆 第5部分：快固化节能型三聚氰胺醇酸浸渍漆 |
China National Standards MPR |
English PDF |
| GB/T 1981.3-2009 |
Varnishes used for electrical insulation - Part 3: Specifications for hot curing iMPRegnating varnishes 电气绝缘用漆 第3部分：热固化浸渍漆通用规范 |
China National Standards MPR |
English PDF |
| GB/T 15022.4-2009 |
Resin based reactive compounds used for electrical insulation - Part 4: Unsaturated polyester based iMPRegnating resins 电气绝缘用树脂基活性复合物 第4部分：不饱和聚酯为基的浸渍树脂 |
China National Standards MPR |
English PDF |
| GB/T 23775-2009 |
CoMPRessed edible mushroom 压缩食用菌 |
China National Standards MPR |
English PDF |
| GB/T 7757-2009 |
Rubber，vulcanized or thermoplastic - Determination of coMPRession stress-strain properties 硫化橡胶或热塑性橡胶 压缩应力应变性能的测定 |
China National Standards MPR |
English PDF |
| GB/T 23561.7-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 7: Methods for determining the uniaxial coMPRessive strength and counting softening coefficient 煤和岩石物理力学性质测定方法 第7部分：单轴抗压强度测定及软化系数计算方法 |
China National Standards MPR |
English PDF |
| GB 19153-2009 |
Minimum allowable values of energy efficiency and energy efficiency grades for displacement air coMPRessors 容积式空气压缩机能效限定值及能效等级 |
China National Standards MPR |
English PDF |
| GB/T 23472-2009 |
Surface decorated strawboard with paper iMPRegnated thermosetting resin 浸渍胶膜纸饰面秸秆板 |
China National Standards MPR |
English PDF |
| GB/T 23471-2009 |
Laminated iMPRegnated paper strawboard composite floor 浸渍纸层压秸秆复合地板 |
China National Standards MPR |
English PDF |
| GB 23394-2009 |
Self-contained closed-circuit breathing apparatus of coMPRessed oxygen 自给闭路式压缩氧气呼吸器 |
China National Standards MPR |
English PDF |
| GB/T 14208.3-2009 |
Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 3: Determination of coMPRessive strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分：压缩强度的测定 |
China National Standards MPR |
English PDF |
| GB/T 23370-2009 |
Hardmetals - CoMPRession test 硬质合金 压缩试验方法 |
China National Standards MPR |
English PDF |
| GB/T 23934-2009 |
Hot coiled helical coMPRession springs - Technical specifications 热卷圆柱螺旋压缩弹簧 技术条件 |
China National Standards MPR |
English PDF |
| GB/T 2089-2009 |
Cylindrical coiled coMPRession spring dimensions and parameters 普通圆柱螺旋压缩弹簧尺寸及参数（两端圈并紧磨平或制扁） |
China National Standards MPR |
English PDF |
| GB/T 1239.2-2009 |
Cold coiled helical springs technical specifications - Part 2: CoMPRessions spring 冷卷圆柱螺旋弹簧技术条件 第2部分：压缩弹簧 |
China National Standards MPR |
English PDF |
| GB/T 4880.3-2009 |
Codes for the representation of names of languages - Part 3: Alpha-3 code for coMPRehensive coverage of languages 语种名称代码 第3部分：所有语种的3字母代码 |
China National Standards MPR |
English PDF |
| GB/T 18437.1-2009 |
The technical criterion of refitting for vehicle by using gas - Part 1: CoMPRessed natural gas automobile 燃气汽车改装技术要求 第1部分：压缩天然气汽车 |
China National Standards MPR |
English PDF |
| GB/T 11837-2009 |
Test methods of the concrete coMPRessive strength of concrete pipes for water 混凝土管用混凝土抗压强度试验方法 |
China National Standards MPR |
English PDF |
| GB/T 1943-2009 |
Method for determination of the modulus of elasticity in coMPRession perpendicular to grain of wood 木材横纹抗压弹性模量测定方法 |
China National Standards MPR |
English PDF |
| GB/T 1939-2009 |
Method of testing in coMPRession perpendicular to grain of wood 木材横纹抗压试验方法 |
China National Standards MPR |
English PDF |
| GB/T 1935-2009 |
Method of testing in coMPRessive strength parallel to grain of wood 木材顺纹抗压强度试验方法 |
China National Standards MPR |
English PDF |
| GB/T 9327-2008 |
CoMPRession and mechanical connectors for power cables for rated voltages up to 35kV(Um=40.5kV) - Test methods and requirements 额定电压35kV(Um=40.5kV)及以下电力电缆导体用压接式和机械式连接金具 试验方法和要求 |
China National Standards MPR |
English PDF |
| GB 14536.5-2008 |
Automatic electrical controls for household and similar use - Particular requirements for thermal motor protectors for motor-coMPRessors of hermetic and semi-hermetic type 家用和类似用途电自动控制器 密封和半密封电动机-压缩机用电动机热保护器的特殊要求 |
China National Standards MPR |
English PDF |
| GB/T 20634.4-2008 |
Non-iMPRegnated densified laminated wood for electrical purposes - Part 4: Specifications for individual materials - Rings produced from birch veneer 电气用非浸渍致密层压木 第4部分：单项材料规范 由桦木薄片制成的环材 |
China National Standards MPR |
English PDF |
| GB/T 20634.3-2008 |
Non-iMPRegnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheets produced from birch veneer 电气用非浸渍致密层压木 第3部分：单项材料规范 由桦木薄片制成的板材 |
China National Standards MPR |
English PDF |
| GB/T 20634.2-2008 |
Non-iMPRegnated densified laminated wood for electrical purposes - Part 2: Methods of test 电气用非浸渍致密层压木 第2部分：试验方法 |
China National Standards MPR |
English PDF |
| GB/T 14315-2008 |
CoMPRession type terminal lugs and ferrules with copper or aluminum for power cables conductors 电力电缆导体用压接型铜、铝接线端子和连接管 |
China National Standards MPR |
English PDF |
| GB/T 3903.28-2008 |
Footwear - Test methods for outsoles - CoMPRession energy 鞋类 外底试验方法 压缩能 |
China National Standards MPR |
English PDF |
| GB/T 22876-2008 |
Paper，board and corrugated fiberboard - Description and calibration of coMPRession testing equipment 纸、纸板和瓦楞纸板 压缩试验仪的描述和校准 |
China National Standards MPR |
English PDF |
| GB/T 22755-2008 |
Brass fittings with press coMPRession sleeves for pipe system 卡压式铜管路连接件 |
China National Standards MPR |
English PDF |
| GB/T 16453.6-2008 |
Technical specification for coMPRehensive control of soil and water conservation - Technique for erosion control of collapse hill 水土保持综合治理 技术规范 崩岗治理技术 |
China National Standards MPR |
English PDF |
| GB/T 16453.5-2008 |
Technical specification for coMPRehensive control of soil and water conservation - Technique for erosion control of wind erosion 水土保持综合治理 技术规范 风沙治理技术 |
China National Standards MPR |
English PDF |
| GB/T 16453.4-2008 |
Technical specification for coMPRehensive control of soil and water conservation - Small engineering of store, drainage and draw water 水土保持综合治理 技术规范 小型蓄排引水工程 |
China National Standards MPR |
English PDF |
| GB/T 16453.3-2008 |
Technical specification for coMPRehensive control of soil and water conservation - Technique for erosion control of gullies 水土保持综合治理 技术规范 沟壑治理技术 |
China National Standards MPR |
English PDF |
| GB/T 16453.2-2008 |
Technical specification for coMPRehensive control of soil and water conservation - Technique for erosion control of waste land 水土保持综合治理 技术规范 荒地治理技术 |
China National Standards MPR |
English PDF |
| GB/T 16453.1-2008 |
Technical specification for coMPRehensive control of soil and water conservation - Technique for erosion control of slope land 水土保持综合治理 技术规范 坡耕地治理技术 |
China National Standards MPR |
English PDF |
| GB/T 15774-2008 |
Method of benefit calculation for coMPRehensive control of soil and water conservation 水土保持综合治理 效益计算方法 |
China National Standards MPR |
English PDF |
| GB/T 15773-2008 |
Regulation of acceptance for coMPRehensive control of soil and water conservation 水土保持综合治理 验收规范 |
China National Standards MPR |
English PDF |
| GB/T 15772-2008 |
General rule of planning for coMPRehensive control of soil and water conservation 水土保持综合治理 规划通则 |
China National Standards MPR |
English PDF |
| GB/T 19410-2008 |
Screw refrigerant coMPRessors 螺杆式制冷压缩机 |
China National Standards MPR |
English PDF |
| GB/T 22471.2-2008 |
Resin iMPRegnated glass banding tape for electrical insulation - Part 2: Test methods 电气绝缘用树脂浸渍玻璃纤维网状无纬绑扎带 第2部分：试验方法 |
China National Standards MPR |
English PDF |
| GB/T 5922-2008 |
Motor vehicles and towed vehicles - Pressure test connection for coMPRessed-air pneumatic braking equipment 汽车和挂车 气压制动装置压力测试连接器技术要求 |
China National Standards MPR |
English PDF |
| GB/T 13277.1-2008 |
CoMPRessed air - Part 1：Contaminants and purity classes 压缩空气 第1部分：污染物净化等级 |
China National Standards MPR |
English PDF |
| GB/T 540-2008 |
Test methods for oil-resisting coMPRessed asbestos fibre jointing 耐油石棉橡胶板试验方法 |
China National Standards MPR |
English PDF |
| GB/T 539-2008 |
Oil-resisting coMPRessed asbestos fibre jointing 耐油石棉橡胶板 |
China National Standards MPR |
English PDF |
| GB/T 3985-2008 |
CoMPRessed asbestos fibre jointing 石棉橡胶板 |
China National Standards MPR |
English PDF |
| GB/T 22307-2008 |
Standard test method for coMPRessive strength of gaskets at elevated temperatures 密封垫片高温抗压强度试验方法 |
China National Standards MPR |
English PDF |
| GB/T 22311-2008 |
Road vehicles - Brake linings - CoMPRessive strain test method 道路车辆 制动衬片 压缩应变试验方法 |
China National Standards MPR |
English PDF |
| GB/T 6669-2008 |
Flexible cellular polymeric materials - Determination of coMPRession set 软质泡沫聚合材料 压缩永久变形的测定 |
China National Standards MPR |
English PDF |
| GB/T 9352-2008 |
Plastic - CoMPRession moulding of test specimens of thermoplastic materials 塑料 热塑性塑料材料试样的压塑 |
China National Standards MPR |
English PDF |
| GB/T 5471-2008 |
Plastics - CoMPRession moulding of test specimens of thermosetting materials 塑料 热固性塑料试样的压塑 |
China National Standards MPR |
English PDF |
| GB/T 1041-2008 |
Plastics - Detemination of coMPRessive properties 塑料 压缩性能的测定 |
China National Standards MPR |
English PDF |
| GB 22207-2008 |
Safety requirements of displacement air coMPRessor 容积式空气压缩机 安全要求 |
China National Standards MPR |
English PDF |
| GB/T 9248-2008 |
Methods of evaluating the performance of flowmeters for incoMPRessible fluids 不可压缩流体流量计性能评定方法 |
China National Standards MPR |
English PDF |
| GB/T 8167-2008 |
Testing method of dynamic coMPRession for packaging cushioning materials 包装用缓冲材料动态压缩试验方法 |
China National Standards MPR |
English PDF |
| GB/T 16935.5-2008 |
Insulation coordination for equipment within low-voltage systems - Part 5: CoMPRehensive method for determining clearances and creepage distances equal to or less than 2mm 低压系统内设备的绝缘配合 第5部分：不超过2mm的电气间隙和爬电距离的确定方法 |
China National Standards MPR |
English PDF |
| GB/T 13501-2008 |
Test methods for insulation compatibility of electric motors for hermetic refrigeration coMPRessors 封闭式制冷压缩机用电动机绝缘相容性试验方法 |
China National Standards MPR |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
