Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 40367-2021 |
Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide 塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法 |
China National Standards Plastics |
 English PDF |
| GB/T 40340-2021 |
Composites and metal assemblies—Galvanic corrosion tests of carbon fibre reinforced Plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests 复合材料与金属组合件 碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验 盐雾试验 |
China National Standards Plastics |
English PDF |
| GB/T 40318-2021 |
Plastics—Environmental aspects—General guidelines for their inclusion in standards 塑料 环境因素 标准中环境因素的通则 |
China National Standards Plastics |
English PDF |
| GB/T 40315-2021 |
Plastics—Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value 塑料 采用水溶液保持湿度恒定进行状态调节和试验的小密闭容器 |
China National Standards Plastics |
English PDF |
| GB/T 40302-2021 |
Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source 塑料 立式软薄试样与小火焰源接触的燃烧性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 40280-2021 |
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 |
China National Standards Plastics |
English PDF |
| GB/T 39715.4-2021 |
Plastics—Biobased content—Part 4: Determination of biobased mass content 塑料 生物基含量 第4部分：生物基物质含量的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39715.3-2021 |
Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content 塑料 生物基含量 第3部分：生物基合成聚合物含量的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39715.2-2021 |
Plastics—Biobased content—Part 2: Determination of biobased carbon content 塑料 生物基含量 第2部分：生物基碳含量的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39715.1-2021 |
Plastics—Biobased content—Part 1: General principles 塑料 生物基含量 第1部分：通用原则 |
China National Standards Plastics |
English PDF |
| GB/T 37199.1-2021 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 1：Designation system and basis for specifications 塑料 聚丁烯（PB）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 33047.3-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 |
China National Standards Plastics |
English PDF |
| GB/T 33047.2-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy 塑料 聚合物热重法（TG） 第2部分：活化能的测定 |
China National Standards Plastics |
English PDF |
| GB/T 29047-2021 |
Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-Plastics and high density polyethylene casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 |
China National Standards Plastics |
English PDF |
| GB/T 15596-2021 |
Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources 塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定 |
China National Standards Plastics |
English PDF |
| GB/T 2408-2021 |
Plastics—Determination of burning characteristics—Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards Plastics |
English PDF |
| GB/T 1845.2-2021 |
Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 40612-2021 |
Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法 |
China National Standards Plastics |
English PDF |
| GB/T 40553-2021 |
Plastics—Specifications for plastics suitable for home composting 塑料 适合家庭堆肥塑料技术规范 |
China National Standards Plastics |
English PDF |
| GB/T 40266-2021 |
Quality general rules of oxides barrier transparent Plastics laminated films and pouches for food packaging 食品包装用氧化物阻隔透明塑料复合膜、袋质量通则 |
China National Standards Plastics |
English PDF |
| GB/T 40224-2021 |
Plastics boxes used for rainwater infiltration,attenuation and storage 雨水渗透、调蓄、储存用塑料模块 |
China National Standards Plastics |
English PDF |
| GB/T 40006.3-2021 |
Plastics—Recycled plastics—Part 3:Polypropylene(PP) materials 塑料 再生塑料 第3部分：聚丙烯(PP)材料 |
China National Standards Plastics |
English PDF |
| GB/T 40006.2-2021 |
Plastics—Recycled plastics—Part 2:Polyethylene(PE) materials 塑料 再生塑料 第2部分：聚乙烯(PE)材料 |
China National Standards Plastics |
English PDF |
| GB/T 40006.1-2021 |
Plastics—Recycled plastic—Part 1:General rules 塑料 再生塑料 第1部分：通则 |
China National Standards Plastics |
English PDF |
| GB/T 39937-2021 |
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 39936-2021 |
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 深冷保冷用泡沫塑料 |
China National Standards Plastics |
English PDF |
| GB/T 39935-2021 |
Plastics—Film and sheeting—Determination of blocking resistance 塑料制品 薄膜和片材 抗粘连性的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39934-2021 |
Plastics—Film and sheeting—Determination of blocking resistance 家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法 |
China National Standards Plastics |
English PDF |
| GB/T 39827.2-2021 |
Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 39827.1-2021 |
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 39822-2021 |
Plastics—Determination of yellowness index and change in yellowness index 塑料 黄色指数及其变化值的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39821-2021 |
Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39818-2021 |
Plastics—Thermosetting moulding materials—Determination of shrinkage 塑料 热固性模塑材料 收缩率的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39812-2021 |
Plastics—Preparation of test specimens by machining 塑料 试样的机加工制备 |
China National Standards Plastics |
English PDF |
| GB/T 10006-2021 |
Plastics—Film and sheeting—Determination of the coefficients of friction 塑料 薄膜和薄片 摩擦系数的测定 |
China National Standards Plastics |
English PDF |
| GB/T 3681.2-2021 |
Plastics—Methods of exposure to solar radiation—Part 2: Direct weathering and exposure behind window glass 塑料 太阳辐射暴露试验方法 第2部分：直接自然气候老化和暴露在窗玻璃后气候老化 |
China National Standards Plastics |
English PDF |
| GB/T 3681.1-2021 |
Plastics—Methods of exposure to solar radiation—Part 1: General guidance 塑料 太阳辐射暴露试验方法 第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 41048-2021 |
Technical requirements for Plastics inspection chamber and manhole for urban drainage 城镇排水用塑料检查井技术要求 |
China National Standards Plastics |
English PDF |
| GB/T 41168-2021 |
Plastics and aluminum foil laminated retort film and pouch for food packaging 食品包装用塑料与铝箔蒸煮复合膜、袋 |
China National Standards Plastics |
English PDF |
| GB/T 41061-2021 |
Test methods for creep properties of fiber reinforced Plastics 纤维增强塑料蠕变性能试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 24282-2021 |
Plastics—Determination of xylene-soluble matter fraction in polypropylene 塑料 聚丙烯中二甲苯可溶物含量的测定 |
China National Standards Plastics |
English PDF |
| GB 14232.4-2021 |
Plastics collapsible containers for human blood and blood components—Part 4: Aphaeresis blood bag systems with integrated features 人体血液及血液成分袋式塑料容器 第4部分：含特殊组件的单采血袋系统 |
China National Standards Plastics |
English PDF |
| GB/T 41010-2021 |
Degradability and identification requirements of biodegradable Plastics and products 生物降解塑料与制品降解性能及标识要求 |
China National Standards Plastics |
English PDF |
| GB/T 40933-2021 |
Plastics—Film and sheeting—Guidance on the testing of thermoplastic films 塑料制品 薄膜和薄片 热塑性塑料薄膜试验指南 |
China National Standards Plastics |
English PDF |
| GB/T 40911.3-2021 |
Plastics—Poly(methyl methacrylate) sheets—Types,dimensions and characteristics—Part 3:Continuous cast sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第3部分：连续浇铸板材 |
China National Standards Plastics |
English PDF |
| GB/T 40911.2-2021 |
Plastics—Poly(methyl methacrylate)sheets—Types,dimensions and characteristics—Part 2:Extruded sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第2部分：挤出板材 |
China National Standards Plastics |
English PDF |
| GB/T 40726-2021 |
Rubber-or Plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定 |
China National Standards Plastics |
English PDF |
| GB/T 30314-2021 |
Rubber- or Plastics-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 |
China National Standards Plastics |
English PDF |
| GB/T 18426-2021 |
Rubber-or Plastics-coated fabrics—Low-temperature bend test 橡胶或塑料涂覆织物 低温弯曲试验 |
China National Standards Plastics |
English PDF |
| GB/T 40006.9-2021 |
Plastics—Recycled plastics—Part 9:Poly(ethylene terephthalate) (PET) materials 塑料 再生塑料 第9部分：聚对苯二甲酸乙二醇酯(PET)材料 |
China National Standards Plastics |
English PDF |
| GB/T 40006.8-2021 |
Plastics—Recycled plastics—Part 8: Polyamide (PA) materials 塑料 再生塑料 第8部分：聚酰胺(PA)材料 |
China National Standards Plastics |
English PDF |
| GB/T 40006.7-2021 |
Plastics—Recycled plastics—Part 7: Polycarbonate(PC) materials 塑料 再生塑料 第7部分：聚碳酸酯(PC)材料 |
China National Standards Plastics |
English PDF |
| GB/T 40006.6-2021 |
Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials 塑料 再生塑料 第6部分：聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）材料 |
China National Standards Plastics |
English PDF |
| GB/T 40006.5-2021 |
Plastics—Recycled plastics—Part 5：Acrylonitrile-butadiene-styrene (ABS) materials 塑料 再生塑料 第5部分：丙烯腈-丁二烯-苯乙烯（ABS）材料 |
China National Standards Plastics |
English PDF |
| GB/T 40872-2021 |
Plastics—Test methods of polyethylene cellular 塑料 聚乙烯泡沫试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 22271.1-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 1: Designation system and basis for specification 塑料 聚甲醛（POM）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 39171-2020 |
Technical specification for waste Plastics recycling 废塑料回收技术规范 |
China National Standards Plastics |
English PDF |
| GB 14232.1-2020 |
Plastics collapsible containers for human blood and blood components—Part 1: Conventional containers 人体血液及血液成分袋式塑料容器 第1部分：传统型血袋 |
China National Standards Plastics |
English PDF |
| GB/T 8813-2020 |
Rigid cellular Plastics—Determination of compression properties 硬质泡沫塑料 压缩性能的测定 |
China National Standards Plastics |
English PDF |
| GB/T 24451-2020 |
Low resilience flexible polyurethane cellular Plastics 慢回弹软质聚氨酯泡沫塑料 |
China National Standards Plastics |
English PDF |
| GB/T 38737-2020 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 |
China National Standards Plastics |
English PDF |
| GB/T 38787-2020 |
Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials 塑料 材料生物分解试验用样品制备方法 |
China National Standards Plastics |
English PDF |
| GB/T 38687-2020 |
Rubber and Plastics machinery—Communicating protocol for auxiliary equipment 橡胶塑料机械 外围设备通信协议 |
China National Standards Plastics |
English PDF |
| GB/T 25156-2020 |
General specifications and inspection methods of rubber and Plastics injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 |
China National Standards Plastics |
English PDF |
| GB/T 38533-2020 |
Injection moulding machines for rubber and Plastics—Mould fixing and connection dimensions 橡胶塑料注射成型机 模具固定和联接尺寸 |
China National Standards Plastics |
English PDF |
| GB/T 39714.2-2020 |
Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 39714.1-2020 |
Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 1:Requirements and designation 塑料 聚四氟乙烯(PTFE)半成品 第1部分：要求和命名 |
China National Standards Plastics |
English PDF |
| GB/T 39690.2-2020 |
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 39690.1-2020 |
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 1: Designation system and basis for specification 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第1部分： 命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 17037.5-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy 塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备 |
China National Standards Plastics |
English PDF |
| GB/T 17037.2-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars 塑料 热塑性塑料材料注塑试样的制备 第2部分：小拉伸试样 |
China National Standards Plastics |
English PDF |
| GB/T 1632.4-2020 |
Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 |
China National Standards Plastics |
English PDF |
| GB/T 39697.2-2020 |
Rubber or Plastics covered rollers—Specifications—Part 2：Surface characteristics 橡胶或塑料包覆辊 规范 第2部分：表面特性 |
China National Standards Plastics |
English PDF |
| GB/T 39697.1-2020 |
Rubber or Plastics covered rollers—Specifications—Part 1: Requirements for hardness 橡胶或塑料包覆辊 规范 第1部分：硬度要求 |
China National Standards Plastics |
English PDF |
| GB/T 39691-2020 |
Plastics—Determination of refractive index 塑料 折光率的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39483.2-2020 |
Rubber and Plastics injection moulding machine—Interface—Part 2:Data exchange interface 橡胶塑料注射成型机 接口 第2部分：数据交换接口 |
China National Standards Plastics |
English PDF |
| GB/T 39385-2020 |
Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility 塑料管道系统 热塑性塑料管材 环柔性的测定 |
China National Standards Plastics |
English PDF |
| GB/T 39383-2020 |
ThermoPlastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 39382-2020 |
ThermoPlastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints 建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 39379-2020 |
ThermoPlastics piping systems for non-pressure applications—Test method for watertightness 无压热塑性塑料管道系统 水密性试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 20674.4-2020 |
Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 4: Traceability coding 塑料管材和管件 聚乙烯系统熔接设备 第4部分：可追溯编码 |
China National Standards Plastics |
English PDF |
| GB/T 20674.3-2020 |
Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 3:Operator's badge 塑料管材和管件 聚乙烯系统熔接设备 第3部分：操作者代码 |
China National Standards Plastics |
English PDF |
| GB/T 20674.2-2020 |
Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 |
China National Standards Plastics |
English PDF |
| GB/T 20674.1-2020 |
Plastics pipes and fittings—Equipment for fusion jointing polyethylene systems—Part 1:Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 |
China National Standards Plastics |
English PDF |
| GB/T 18252-2020 |
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 |
China National Standards Plastics |
English PDF |
| GB/T 39395-2020 |
Test method for buckling resistance of the thermoPlastics inspection chamber bases 热塑性塑料检查井井座抗压失稳试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 39490-2020 |
Test method for liquid impingement erosion resistance of fiber-reinforced Plastics—Rotating apparatus method 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法 |
China National Standards Plastics |
English PDF |
| GB/T 39483.1-2020 |
Rubber and Plastics injection moulding machine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分：机械和电气接口 |
China National Standards Plastics |
English PDF |
| GB/T 39327-2020 |
Rubber and Plastics hoses for marine-engine wet-exhaust systems—Specification 船用发动机湿式排气系统用橡胶和塑料软管 规范 |
China National Standards Plastics |
English PDF |
| GB/T 39249-2020 |
Rubber and Plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards Plastics |
English PDF |
| GB/T 36805.2-2020 |
Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 |
China National Standards Plastics |
English PDF |
| GB/T 14905-2020 |
Rubber and Plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 |
China National Standards Plastics |
English PDF |
| GB 51352-2019 |
Engineering technical standard for fiber reinforced Plastics chimney 纤维增强塑料排烟筒工程技术标准 |
China National Standards Plastics |
English PDF |
| GB/T 38288-2019 |
Plastics—Recycled polypropylene compound 塑料 聚丙烯再生改性专用料 |
China National Standards Plastics |
English PDF |
| GB/T 38273.2-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 |
China National Standards Plastics |
English PDF |
| GB/T 37188.3-2019 |
Plastics—Acquisition and presentation of comparable multipoint data—Part 3:Environmental influences on properties 塑料 可比多点数据的获得和表示 第3部分：环境对性能的影响 |
China National Standards Plastics |
English PDF |
| GB/T 37188.1-2019 |
Plastics—Acquisition and presentation of comparable multipoint data—Part 1: Mechanical properties 塑料 可比多点数据的获得和表示 第1部分：机械性能 |
China National Standards Plastics |
English PDF |
| GB/T 23711.8-2019 |
Test method for pressure vessels lined with Plastics—Part 8:High-resistance testing 塑料衬里压力容器试验方法 第8部分：耐高电阻试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with Plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with Plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with Plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with Plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with Plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with Plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.1-2019 |
Test method for pressure vessels lined with Plastics—Part 1:Spark testing 塑料衬里压力容器试验方法 第1部分：电火花试验 |
China National Standards Plastics |
English PDF |
| GB/T 16422.1-2019 |
Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance 塑料 实验室光源暴露试验方法 第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 12009.5-2016 |
(Plastics - Aromatic isocyanates for the production of polyurethane - Part 5: Determination of acidity - amendment No. 1) 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定《第1号修改单》 |
China National Standards Plastics |
English PDF |
| GB/T 38288-2019 |
Plastics—Recycled polypropylene compound 塑料 聚丙烯再生改性专用料 |
China National Standards Plastics |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 |
China National Standards Plastics |
English PDF |
| GB/T 37188.3-2019 |
Plastics—Acquisition and presentation of comparable multipoint data—Part 3:Environmental influences on properties 塑料 可比多点数据的获得和表示 第3部分：环境对性能的影响 |
China National Standards Plastics |
English PDF |
| GB/T 37188.1-2019 |
Plastics—Acquisition and presentation of comparable multipoint data—Part 1: Mechanical properties 塑料 可比多点数据的获得和表示 第1部分：机械性能 |
China National Standards Plastics |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with Plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with Plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with Plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with Plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with Plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards Plastics |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with Plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards Plastics |
English PDF |
| GB/T 16422.1-2019 |
Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance 塑料 实验室光源暴露试验方法 第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 38008-2019 |
Gate valves of thermoPlastics materials 热塑性塑料闸阀 |
China National Standards Plastics |
English PDF |
| GB/T 37890-2019 |
Rubber-or Plastics-coated fabrics—Test method for wicking of the cloth 橡胶或塑料涂覆织物 芯吸性能测试方法 |
China National Standards Plastics |
English PDF |
| GB/T 37889-2019 |
Rubber-or Plastics-coated fabrics—Test method for liquid contamination 橡胶或塑料涂覆织物 致液体污染性测试方法 |
China National Standards Plastics |
English PDF |
| GB/T 37881-2019 |
Plastics－Long glass fiber reinforced polypropylene（PP） compound for automotive 塑料 汽车用长玻璃纤维增强聚丙烯(PP)专用料 |
China National Standards Plastics |
English PDF |
| GB/T 37862-2019 |
Plastics pipes used for pipeline rehabilitation—General 非开挖修复用塑料管道 总则 |
China National Standards Plastics |
English PDF |
| GB/T 37842-2019 |
Ball valves of thermoPlastics materials 热塑性塑料球阀 |
China National Standards Plastics |
English PDF |
| GB/T 37821-2019 |
Technical specifications for recycling of waste Plastics 废塑料再生利用技术规范 |
China National Standards Plastics |
English PDF |
| GB/T 37547-2019 |
Classification and code of waste Plastics 废塑料分类及代码 |
China National Standards Plastics |
English PDF |
| GB/T 9576-2019 |
Rubber and Plastics hoses and hose assemblies—Guidelines for selection, storage, use and maintenance 橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 |
China National Standards Plastics |
English PDF |
| GB/T 37589-2019 |
Technical specification for anticorrosion of steel pipe and fitting lining with fluoroPlastics 钢制管道及管件内衬氟塑料耐蚀作业技术规范 |
China National Standards Plastics |
English PDF |
| GB/T 37427-2019 |
Plastics—Acrylonitrile-butadiene-styrene(ABS) compound for automobile 塑料 汽车用丙烯腈-丁二烯-苯乙烯(ABS)专用料 |
China National Standards Plastics |
English PDF |
| GB/T 37426-2019 |
Plastics—Test specimens 塑料 试样 |
China National Standards Plastics |
English PDF |
| GB/T 17037.1-2019 |
Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens 塑料 热塑性塑料材料注塑试样的制备 第1部分：一般原理及多用途试样和长条形试样的制备 |
China National Standards Plastics |
English PDF |
| GB/T 1634.2-2019 |
Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite 塑料 负荷变形温度的测定 第2部分：塑料和硬橡胶 |
China National Standards Plastics |
English PDF |
| GB/T 1634.1-2019 |
Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 37662.2-2019 |
：Electrical equipment and system of industrial machines—Terminology—Part 2：Plastics machinery 工业机械电气设备及系统 术语 第2部分：塑料机械 |
China National Standards Plastics |
English PDF |
| GB/T 24113.2-2019 |
Electrical equipment of machines—Computer control systems for Plastics machinery—Part 2：Test and evaluation method 机械电气设备 塑料机械计算机控制系统 第2部分：试验与评价方法 |
China National Standards Plastics |
English PDF |
| GB/T 34691.1-2018 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-热塑性聚酯（TP）模塑和挤出材料-第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 2918-2018 |
Plastics—Standard atmospheres for conditioning and testing 塑料-试样状态调节和试验的标准环境 |
China National Standards Plastics |
English PDF |
| GB/T 37188.2-2018 |
Plastics—Acquisition and presentation of comparable multipoint data—Part 2:Thermal and processing properties 塑料-可比多点数据的获得和表示-第2部分:热性能和加工性能 |
China National Standards Plastics |
English PDF |
| GB/T 37196-2018 |
Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定 |
China National Standards Plastics |
English PDF |
| GB/T 37199.2-2018 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 37194.2-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 37194.1-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-聚苯硫醚(PPS)模塑和挤出材料-第1部分:命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 37189-2018 |
Soft melamine foamed Plastics material 软质三聚氰胺泡沫塑料材料 |
China National Standards Plastics |
English PDF |
| GB/T 37263-2018 |
Prefabricated directly buried insulating plastic-steel-plastic composite pipes with polyurethane [PUR]foamed-Plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管聚氨酯发泡预制直埋保温钢塑复合管 |
China National Standards Plastics |
English PDF |
| GB/T 1040.1-2018 |
Plastics—Determination of tensile properties—Part 1:General principles 塑料-拉伸性能的测定-第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 2408-2008/XG1-2018 |
Plastics - Determination of burning characteristics - Horizontal and vertical test 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单 |
China National Standards Plastics |
English PDF |
| GB/T 24128-2018 |
Plastics—Assessment of the effectiveness of fungistatic compounds in plastics formulations 塑料-塑料防霉剂的防霉效果评估 |
China National Standards Plastics |
English PDF |
| GB/T 36214.5-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分：光散射法 |
China National Standards Plastics |
English PDF |
| GB/T 36214.4-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法 |
China National Standards Plastics |
English PDF |
| GB/T 36214.2-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法 |
China National Standards Plastics |
English PDF |
| GB/T 36214.3-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法 |
China National Standards Plastics |
English PDF |
| GB/T 36214.1-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分：通则 |
China National Standards Plastics |
English PDF |
| GB/T 36374.1-2018 |
Plastics-Sulfone polymer moulding and extrusion materials—Part1:Designation system and basis for specifications 塑料 砜聚合物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 36532-2018 |
Fibre-reinforced Plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics 纤维增强塑料 热固性模塑料和预浸料 固化特性测定 |
China National Standards Plastics |
English PDF |
| GB/T 36790-2018 |
Plastics—Polyamides—Accelerated conditioning of test specimens 塑料 聚酰胺 试样加速状态调节 |
China National Standards Plastics |
English PDF |
| GB/T 36793-2018 |
Determination of platicizers in rubber-Plastics—Gas chromatography-mass spectrometry method 橡塑材料中增塑剂含量的测定 气相色谱质谱联用法 |
China National Standards Plastics |
English PDF |
| GB/T 36702.1-2018 |
Irrigation equipment—Safety devices for chemigation—Part 1: Small Plastics valves for chemigation 灌溉设备 化学灌溉用安全装置 第1部分：化学灌溉用小型塑料阀 |
China National Standards Plastics |
English PDF |
| GB/T 36805.1-2018 |
Plastics—Determination of tensile properties at high strain rates—Part 1:Equation fitting method 塑料 高应变速率下的拉伸性能测定 第1部分：方程拟合法 |
China National Standards Plastics |
English PDF |
| GB/T 36800.1-2018 |
Plastics—Thermomechanical analysis(TMA)—Part 1:General principles 塑料 热机械分析法(TMA) 第1部分：通则 |
China National Standards Plastics |
English PDF |
| GB/T 36800.2-2018 |
Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature 塑料 热机械分析法(TMA) 第2部分：线性热膨胀系数和玻璃化转变温度的测定 |
China National Standards Plastics |
English PDF |
| GB/T 36587-2018 |
Rubber and Plastics machinery—Terminology 橡胶塑料机械 术语 |
China National Standards Plastics |
English PDF |
| GB/T 35974.2-2018 |
Plastics and plastic lining pressure vessels—Part 2: Material 塑料及其衬里制压力容器 第2部分：材料 |
China National Standards Plastics |
English PDF |
| GB/T 35974.3-2018 |
Plastics and plastic lining pressure vessels—Part 3:Design 塑料及其衬里制压力容器 第3部分：设计 |
China National Standards Plastics |
English PDF |
| GB/T 35974.1-2018 |
Plastics and plastic lining pressure vessels—Part 1: General requirements 塑料及其衬里制压力容器 第1部分：通用要求 |
China National Standards Plastics |
English PDF |
| GB/T 35974.5-2018 |
Plastics and plastic lining pressure vessels—Part 5: Fabrication, inspection and testing for pressure vessels with plastic lining 塑料及其衬里制压力容器 第5部分：塑料衬里制压力容器的制造、检查与检验 |
China National Standards Plastics |
English PDF |
| GB/T 35974.4-2018 |
Plastics and plastic lining pressure vessels—Part 4: Fabrication, inspection and testing for plastic pressure vessels 塑料及其衬里制压力容器 第4部分：塑料制压力容器的制造、检查与检验 |
China National Standards Plastics |
English PDF |
| GB/T 6111-2018 |
ThermoPlastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure 流体输送用热塑性塑料管道系统 耐内压性能的测定 |
China National Standards Plastics |
English PDF |
| GB/T 3682.2-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 1043.2-2018 |
Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test 塑料 简支梁冲击性能的测定 第2部分：仪器化冲击试验 |
China National Standards Plastics |
English PDF |
| GB/T 3682.1-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分：标准方法 |
China National Standards Plastics |
English PDF |
| GB/T 20027.2-2017 |
Rubber-or Plastics-coated fabrics—Determination of bursting strength—Part 2: Hydraulic method 橡胶或塑料涂覆织物 破裂强度的测定 第2部分：液压法 |
China National Standards Plastics |
English PDF |
| GB/T 34691.2-2017 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics |
English PDF |
| GB/T 24149.2-2017 |
Plastics―Polypropylene(PP) compound for automobile―Part 2: Instrument panel 塑料 汽车用聚丙烯（PP）专用料 第2部分：仪表板 |
China National Standards Plastics |
English PDF |
| GB/T 24149.3-2017 |
Plastics―Polypropylene(PP) compound for automobile―Part 3: Door panel 塑料 汽车用聚丙烯（PP）专用料 第3部分：门内板 |
China National Standards Plastics |
English PDF |
| GB/T 34329-2017 |
General requirements of fiber reinforced Plastics pressure vessel 纤维增强塑料压力容器通用要求 |
China National Standards Plastics |
English PDF |
| GB/T 34437-2017 |
Test method of the oxygen permeability of the multilayer composite Plastics pipe 多层复合塑料管材氧气渗透性能测试方法 |
China National Standards Plastics |
English PDF |
| GB/T 3854-2017 |
Test method for hardness of reinforced Plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 5565.2-2017 |
Rubber and Plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 |
China National Standards Plastics |
English PDF |
| GB/T 9574-2017 |
Rubber and Plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 |
China National Standards Plastics |
English PDF |
| GB/T 5565.3-2017 |
Rubber and Plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 |
China National Standards Plastics |
English PDF |
| GB/T 5565.1-2017 |
Rubber and Plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 |
China National Standards Plastics |
English PDF |
| GB/T 33797-2017 |
Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas 塑料 在高固体份堆肥条件下最终厌氧生物分解能力的测定 采用分析测定释放生物气体的方法 |
China National Standards Plastics |
English PDF |
| GB/T 12784-2017 |
Pressurized kneader for rubber and Plastics 橡胶塑料加压式捏炼机 |
China National Standards Plastics |
English PDF |
| GB/T 3857-2017 |
Test method for chemical resistance of glass fiber reinforced thermosetting Plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 33488.4-2017 |
Test method of pressure equipments of thermoPlastics welded for chemicals—Part 4:Ultrasonic examination 化工用塑料焊接制承压设备检验方法 第4部分：超声检测 |
China National Standards Plastics |
English PDF |
| GB/T 33488.1-2017 |
Test method of pressure equipments of thermoPlastics welded for chemicals—Part 1: General requirements 化工用塑料焊接制承压设备检验方法 第1部分：总则 |
China National Standards Plastics |
English PDF |
| GB/T 33488.3-2017 |
Test method of pressure equipments of thermoPlastics welded for chemicals—Part 3: Radiographic examination 化工用塑料焊接制承压设备检验方法 第3部分：射线检测 |
China National Standards Plastics |
English PDF |
| GB/T 33488.2-2017 |
Test method of pressure equipments of thermoPlastics welded for chemicals—Part 2: Visual examination 化工用塑料焊接制承压设备检验方法 第2部分：外观检测 |
China National Standards Plastics |
English PDF |
| GB/T 12000-2017 |
Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist 塑料 暴露于湿热、水喷雾和盐雾中影响的测定 |
China National Standards Plastics |
English PDF |
| GB/T 17603-2017 |
Standard practice for outdoor exposure testing of photodegradable Plastics 光解性塑料户外暴露试验方法 |
China National Standards Plastics |
English PDF |
| GB/T 34903.1-2017 |
Petroleum,petrochemical and natural gas industries—Non-metallic materials in contact with media related to oil and gas production—Part 1:ThermoPlastics 石油、石化与天然气工业 与油气开采相关介质接触的非金属材料 第1部分：热塑性塑料 |
China National Standards Plastics |
English PDF |
| GB/T 35382-2017 |
Test methods for energy consumption of blow moulding machines for Plastics 塑料中空成型机能耗检测方法 |
China National Standards Plastics |
English PDF |
| GB/T 35513.1-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 1: Designation system and basis for specifications 塑料 聚碳酸酯(PC)模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Plastics |
English PDF |
| GB 16487.12-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of Plastics 进口可用作原料的固体废物环境保护控制标准—废塑料 |
China National Standards Plastics |
English PDF |
| GB/T 35513.2-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试 |
China National Standards Plastics |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
