Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 18380.12-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 12:Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 kW pre-mixed flame 电缆和光缆在火焰条件下的燃烧试验 第12部分：单根绝缘电线电缆火焰垂直蔓延试验 1 kW 预混合型火焰试验方法 |
China National Standards 2:Test |
 English PDF |
| GB/T 2423.38-2021 |
Environmental testing-Part 2:Test methods-Test R:Water test method and guidance 环境试验 第2部分：试验方法 试验R：水试验方法和导则 |
China National Standards 2:Test |
English PDF |
| GB/T 25387.2-2021 |
Wind turbines generator system—Full-power converter—Part 2:Test method 风力发电机组 全功率变流器 第2部分：试验方法 |
China National Standards 2:Test |
English PDF |
| GB/T 39517.2-2020 |
Tractors and machinery for agriculture and forestry—Test procedures for positioning and guidance systems in agriculture—Part 2:Testing of satellite-based auto-guidance systems during straight and level travel 农林拖拉机和机械 农用定位与导航系统测试规程 第2部分：在直线和水平运行状态下卫星自动导航系统的测试 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分：试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.10-2019 |
Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) 环境试验 第2部分：试验方法 试验Fc: 振动(正弦) |
China National Standards 2:Test |
English PDF |
| GB/T 37911.2-2019 |
Application interface of BDS timing for power system—Part 2:Testing specification 电力系统北斗卫星授时应用接口 第2部分：检测规范 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分：试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.10-2019 |
Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) 环境试验 第2部分：试验方法 试验Fc: 振动(正弦) |
China National Standards 2:Test |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.5-2019 |
Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock 环境试验 第2部分:试验方法 试验Ea和导则:冲击 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.62-2018 |
Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test 环境试验-第2部分:试验方法-试验Fx和导则:多输入多输出振动 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.48-2018 |
Environmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method 环境试验-第2部分:-试验方法-试验Ff:振动-时间历程和正弦拍频法 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.61-2018 |
Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen 环境试验-第2部分:试验方法-试验和导则:大型试件砂尘试验 |
China National Standards 2:Test |
English PDF |
| GB/T 22324.2-2017 |
Saffron—Part 2:Test methods 藏红花 第2部分：试验方法 |
China National Standards 2:Test |
English PDF |
| GB/T 18271.2-2017 |
Process measurement and control devices—General methods and procedures for evaluating performance—Part 2:Tests under reference conditions 过程测量和控制装置 通用性能评定方法和程序 第2部分：参比条件下的试验 |
China National Standards 2:Test |
English PDF |
| GB/T 33626.2-2017 |
Pneumatic lutricators—Part 2:Test methods to determine the main characteristics to be included in supplier’s literature 气动油雾器 第2部分：评定商务文件中包含的主要特性的试验方法 |
China National Standards 2:Test |
English PDF |
| GB/T 5171.22-2017 |
Small-power motors—Part 22:Test methods for permanent magnet brushless DC motors 小功率电动机 第22部分：永磁无刷直流电动机试验方法 |
China National Standards 2:Test |
English PDF |
| GB/T 18380.32-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 32:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 |
China National Standards 2:Test |
English PDF |
| GB/T 18380.22-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 22:Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame 电缆和光缆在火焰条件下的燃烧试验 第22部分：单根绝缘细电线电缆火焰垂直蔓延试验 扩散型火焰试验方法 |
China National Standards 2:Test |
English PDF |
| GB/T 18380.12-2008 |
Test on electric and optical fibre cables under fire conditions - Part 12:Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1kW pre-mixed flame 电缆和光缆在火焰条件下的燃烧试验 第12部分：单根绝缘电线电缆火焰垂直蔓延试验 1kW预混合型火焰试验方法 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.48-2008 |
Environmental testing for electric and electronic products - Part 2:Test methods - Test Ff: Vibration- Time-history method 电工电子产品环境试验 第2部分：试验方法 试验Ff：振动-时间历程法 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.58-2008 |
Environmental testing for electric and electronic products - Part 2:Tests -Test Fi: Vibration - Mixed Mode 电工电子产品环境试验 第2-80部分: 试验方法 试验Fi: 振动 混合模式 |
China National Standards 2:Test |
English PDF |
| GB/T 19949.2-2005 |
Road vehicle Airbag components Part2:Testing of airbag modules 道路车辆 安全气囊部件 第2部分:安全气囊模块试验 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.36-2005 |
Environmental testing for electric and electronic products Part 2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分：试验方法 试验Z/BFc：散热和非散热试验样品的高温/振动(正弦)综合试验 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.35-2005 |
Environmental testing for electric and electronic products Part 2:Tests Tests Z/Afc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分：试验方法 试验Z/AFc：散热和非散热试验样品的低温/振动(正弦)综合试验 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.28-2005 |
Basic environmental testing procedures for electric and electronic products-Part2:Test methods-Test T:Soldering 电工电子产品环境试验 第2部分：试验方法 试验T：锡焊 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.27-2005 |
Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test 电工电子产品环境试验 第2部分：试验方法 试验Z/AMD：低温/低气压/湿热连续综合试验 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.33-2005 |
Environmental testing for electric and electronic products Part 2:Test Method Test Kca:High concentration sulfur dioxide 电工电子产品环境试验 第2部分:试验方法 试验Kca：高浓度二氧化硫试验 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.54-2005 |
Environmental testing for electric and electronic products-Part 2:Test Methods-Test Xc:Fluid contamination 电工电子产品环境试验 第2部分:试验方法 试验Xc：流体污染 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.53-2005 |
Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands 电工电子产品环境试验 第2部分:试验方法 试验Xb：由手的磨擦造成标记和印刷文字的磨损 |
China National Standards 2:Test |
English PDF |
| GB/T 15623.2-2003 |
Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 2:Test methods for three-way directional flow control valves 液压传动 电调制液压控制阀 第2部分:三通方向流量控制阀试验方法 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.52-2003 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test 77:Body strength and impact shock 电工电子产品环境试验 第2部分:试验方法 试验77:结构强度与撞击 |
China National Standards 2:Test |
English PDF |
| GB/T 18310.42-2003 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-42:Tests--Static side load for connectors 纤维光学互连器件和无源器件 基本试验和测量程序 第2-42部分:试验 连接器的静态端部负荷 |
China National Standards 2:Test |
English PDF |
| GB/T 18310.22-2003 |
Fibre optic interconnecting devices and passive components--Basic test andmeasurement procedures--Part 2-22:Tests--Change of temperature 纤维光学互连器件和无源器件 基本试验和测量程序 第2-22部分:试验 温度变化 |
China National Standards 2:Test |
English PDF |
| GB/T 5137.2-2002 |
Road vehicles--Safety glazing materials--Part 2:Test methods for optical properties 汽车安全玻璃试验方法 第2部分:光学性能试验 |
China National Standards 2:Test |
English PDF |
| GB/T 18310.12-2002 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-12:Tests--Impact 纤维光学互连器件和无源器件 基本试验和测量程序 第2-12部分:试验 撞击 |
China National Standards 2:Test |
English PDF |
| GB/T 18375.2-2001 |
Prosthetics--Structural testing of lower-limb prostheses--Part 2:Test samples 假肢 下肢假肢的结构检验 第2部分:试验样品 |
China National Standards 2:Test |
English PDF |
| GB/T 18310.2-2001 |
Fibre optic interconnecting devices and passive components--Basic test andmeasurement procedures--Part 2-2:Tests--Mating durability 纤维光学互连器件和无源器件 基本试验和测量程序 第2-2部分:试验 配接耐久性 |
China National Standards 2:Test |
English PDF |
| GB/T 18271.2-2000 |
Process measurement and control devices--General methods and procedures for evaluating performance--Part 2:Tests under reference conditions 过程测量和控制装置 通用性能评定方法和程序 第2部分:参比条件下的试验 |
China National Standards 2:Test |
English PDF |
| GB/T 18138.2-2000 |
Information technology--Open Systems Interconnection--Conformance test suite for the presentation layer--Part 2:Test suite structure and test purposes for the ASN.1 basic encodings 信息技术 开放系统互连 表示层一致性测试套 第2部分:ASN.1基本编码测试套结构和测试目的 |
China National Standards 2:Test |
English PDF |
| GB/T 16850.2-1999 |
Basic specification for optical fibre amplifier test methods--Part 2:Test methods for powerparameters 光纤放大器试验方法基本规范 第2部分:功率参数的试验方法 |
China National Standards 2:Test |
English PDF |
| GB/T 17651.2-1998 |
Measurement of smoke density of cables burning under defined conditions--Part 2:Test procedure and requirements 电缆或光缆在特定条件下燃烧的烟密度测定 第2部分:试验步骤和要求 |
China National Standards 2:Test |
English PDF |
| GB/T 17154.2-1997 |
ISDN user-network interface layer 3 specification and testing method for basic call control procedure--Part 2:Testing method for layer 3 basic call control protocol ISDN用户-网络接口第三层基本呼叫控制技术规范及测试方法 第2部分:第三层基本呼叫控制协议测试方法 |
China National Standards 2:Test |
English PDF |
| GB/T 4018.2-1997 |
Pillar type vertical drilling machines--Testing of the accuracy--Part 2:Testing of the working accuracy 圆柱立式钻床 精度检验 第2部分:工作精度检验 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.49-1997 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test Fe:Vibration--Sine-beat method 电工电子产品环境试验 第2部分:试验方法 试验Fe:振动----正弦拍频法 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.47-1997 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test Fg:Vibration，acoustically induced 电工电子产品环境试验 第2部分:试验方法 试验Fg:声振 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.5-1995 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test Ea and guidance:Shock 电工电子产品环境试验 第二部分:试验方法 试验Ea和导则:冲击 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.8-1995 |
Environmentaltesting for electric and electronic products--Part 2:Test methods--Test Ed:Free fall 电工电子产品环境试验 第二部分:试验方法 试验Ed:自由跌落 |
China National Standards 2:Test |
English PDF |
| GB/T 2423.7-1995 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test Ec and guidance:Drop and topple (Primarily for equipment-type specimens) 电工电子产品环境试验 第二部分:试验方法 试验Ec和导则:倾跌与翻倒 (主要用于设备型样品) |
China National Standards 2:Test |
English PDF |
| GB/T 2423.6-1995 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test Eb and guidance:Bump 电工电子产品环境试验 第二部分:试验方法 试验Eb和导则:碰撞 |
China National Standards 2:Test |
English PDF |
| Find out:51Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
