Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 41157.3-2022 |
Fasteners for nuclear power plants—Part 3:Bolts, screws and studs made of corrosion-resistant stainless steel 核电厂用紧固件 第3部分:不锈钢螺栓、螺钉和螺柱 |
China National Standards 3 |
English PDF |
GB/T 18380.36-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 36:Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分:垂直安装的成束电线电缆火焰垂直蔓延试验 D类 |
China National Standards 3 |
English PDF |
GB/T 18380.35-2022 |
Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分:垂直安装的成束电线电缆火焰垂直蔓延试验 C类 |
China National Standards 3 |
English PDF |
GB/T 18380.31-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分:垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards 3 |
English PDF |
GB/T 18380.13-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 13:Test for vertical flame propagation for a single insulated wire or cable—Procedure for determination of flaming droplets/particles 电缆和光缆在火焰条件下的燃烧试验 第13部分:单根绝缘电线电缆火焰垂直蔓延试验 测定燃烧的滴落(物)/微粒的试验方法 |
China National Standards 3 |
English PDF |
GB/T 8446.3-2022 |
Heat sinks for power semiconductor devices—Part 3: Insulators and fasteners 电力半导体器件用散热器 第3部分:绝缘件和紧固件 |
China National Standards 3 |
English PDF |
GB/T 16507.3-2022 |
Water-tube boilers—Part 3: Structure design 水管锅炉 第3部分:结构设计 |
China National Standards 3 |
English PDF |
GB/T 41158.3-2022 |
Three-dimensional process planning for mechanical products—Part 3: Model building 机械产品三维工艺设计 第3部分:模型构建 |
China National Standards 3 |
English PDF |
GB/T 41344.3-2022 |
Safety of machinery - Risk warning - Part 3: Classification {译} 机械安全 风险预警 第3部分:分级 |
China National Standards 3 |
English PDF |
GB/T 41275.3-2022 |
Avionics Process Management Aerospace and Defense Electronic Systems Containing Lead-Free Solder Part 3: System Performance Test Methods Containing Lead-Free Solder and Lead-Free Pins {译} 航空电子过程管理 含无铅焊料航空航天及国防电子系统 第3部分:含无铅焊料和无铅管脚的系统性能试验方法 |
China National Standards 3 |
English PDF |
GB/T 41295.3-2022 |
Functional Safety Application Guide Part 3: Test Validation {译} 功能安全应用指南 第3部分:测试验证 |
China National Standards 3 |
English PDF |
GB/T 5796.3-2022 |
Trapezoidal screw threads—Part 3: Basic dimensions 梯形螺纹 第3部分:基本尺寸 |
China National Standards 3 |
English PDF |
GB/T 6609.2-2022 |
Chemical analysis methods and determination of physical performance of alumina—Part 2: Determination of loss of mass at 300 ℃ and 1000 ℃ 氧化铝化学分析方法和物理性能测定方法 第2部分:300 ℃和1000 ℃质量损失的测定 |
China National Standards 3 |
English PDF |
GB/T 16895.22-2022 |
Low-voltage electrical installations - Part 5-53: Selection and installation of electrical equipment. Electrical appliances for safety protection, isolation, switching, control and monitoring {译} 低压电气装置 第5-53部分:电气设备的选择和安装 用于安全防护、隔离、通断、控制和监测的电器 |
China National Standards 3 |
English PDF |
GB/T 42284.3-2022 |
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 3: Mechanical loads {译} 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第3部分:机械负荷 |
China National Standards 3 |
English PDF |
GB/T 18802.352-2022 |
Low-voltage surge arrester components - Part 352: Guidelines for the selection and use of surge isolating transformers (SIT) for telecommunication and signaling networks {译} 低压电涌保护器元件 第352部分:电信和信号网络的电涌隔离变压器(SIT)的选择和使用导则 |
China National Standards 3 |
English PDF |
GB/T 42214-2022 |
Space environment Low-altitude (300km-600km) high-energy radiation model {译} 空间环境 低高度(300km~600 km)高能辐射模型 |
China National Standards 3 |
English PDF |
GB/T 17215.324-2022 |
Electrical Measuring Equipment (AC) Particular Requirements Part 24: Static Fundamental Component Reactive Energy Meters (Class 0.5S, Class 1S, Class 1, Class 2 and Class 3) {译} 电测量设备(交流) 特殊要求 第24部分:静止式基波分量无功电能表(0.5S级、1S级、1级、2级和3级) |
China National Standards 3 |
English PDF |
GB/T 17215.323-2022 |
Electrical measuring equipment (alternating current) - Particular requirements - Part 23: Static reactive energy meters (classes 2 and 3) {译} 电测量设备(交流) 特殊要求 第23部分:静止式无功电能表(2级和3级) |
China National Standards 3 |
English PDF |
GB/T 22264.3-2022 |
Mounted electrical measuring instruments with digital display - Part 3: Particular requirements for wattmeters and reactive wattmeters {译} 安装式数字显示电测量仪表 第3部分:功率表和无功功率表的特殊要求 |
China National Standards 3 |
English PDF |
GB/T 25915.13-2022 |
Cleanrooms and related controlled environments - Part 13: Surface cleaning to particle and chemical cleanliness requirements {译} 洁净室及相关受控环境 第13部分:达到粒子和化学洁净度要求的表面清洁 |
China National Standards 3 |
English PDF |
GB/T 34590.3-2022 |
Road vehicles - Functional safety - Part 3: Concept phase {译} 道路车辆 功能安全 第3部分:概念阶段 |
China National Standards 3 |
English PDF |
GB/T 18737.3-2022 |
Textile machinery and accessories - Beams of warp - Part 3: Beams of weaving {译} 纺织机械与附件 经轴 第3部分:织轴 |
China National Standards 3 |
English PDF |
GB/T 42216.3-2022 |
Molecular in vitro diagnostic tests - Specification for preexamination procedures of formalin-fixed and paraffin-embedded tissues - Part 3: Isolation of DNA {译} 分子体外诊断检验 福尔马林固定及石蜡包埋组织检验前过程的规范 第3部分:分离DNA |
China National Standards 3 |
English PDF |
GB/T 26416.3-2022 |
Chemical analysis methods of rare earth ferroalloys - Part 3: Determination of calcium, magnesium, aluminum, nickel, manganese content - Inductively coupled plasma emission spectrometry {译} 稀土铁合金化学分析方法 第3部分:钙、镁、铝、镍、锰量的测 定 电感耦合等离子体发射光谱法 |
China National Standards 3 |
English PDF |
GB/T 41903.3-2022 |
Information technology - Object-oriented biometric application programming interface - Part 3: C# implementation {译} 信息技术 面向对象的生物特征识别应用编程接口 第3部分:C#实现 |
China National Standards 3 |
English PDF |
GB/T 42193.3-2022 |
Road vehicles - Communication of emissions-related diagnostics between the vehicle and external equipment - Part 3: Requirements and use of diagnostic connectors and associated circuits {译} 道路车辆 车辆和外部设备之间排放相关诊断的通信 第3部分:诊断连接器和相关电路的要求及使用 |
China National Standards 3 |
English PDF |
GB/T 14536.13-2022 |
Electric automatic controllers - Part 13: Particular requirements for electric door locks {译} 电自动控制器 第13部分:电动门锁的特殊要求 |
China National Standards 3 |
English PDF |
GB/T 14536.3-2022 |
Electric automatic controllers - Part 3: Particular requirements for motor thermal protectors {译} 电自动控制器 第3部分:电动机热保护器的特殊要求 |
China National Standards 3 |
English PDF |
GB/T 42207.5-2022 |
Connectors for electronic equipment - Product requirements - Rectangular connectors - Part 5: Detail specification for snap lock rewirable power connectors with rated voltage DC 250 V and rated current 30 A {译} 电子设备用连接器 产品要求 矩形连接器 第5部分:额定电压直流250 V额定电流30 A卡扣锁紧可重复接线电源连接器详细规范 |
China National Standards 3 |
English PDF |
GB/T 41066.3-2022 |
Oil and gas drilling equipment - Offshore oil semi-submersible drilling platform - Part 3: Operation and inspection {译} 石油天然气钻采设备 海洋石油半潜式钻井平台 第3部分:操作和检验 |
China National Standards 3 |
English PDF |
GB/T 33523.72-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 72: XML File Format x3p {译} 产品几何技术规范(GPS)表面结构 区域法 第72部分:XML文件格式x3p |
China National Standards 3 |
English PDF |
GB/T 33523.603-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 603: Nominal Properties of Non-Contact (Phase Shift Interferometry) Type Instruments {译} 产品几何技术规范(GPS) 表面结构 区域法 第603部分:非接触(相移干涉显微)式仪器的标称特性 |
China National Standards 3 |
English PDF |
GB/T 33523.3-2022 |
Geometric Product Specification (GPS) Surface Structure Area Method Part 3: Set of Specification Operations {译} 产品几何技术规范(GPS) 表面结构 区域法 第3部分:规范操作集 |
China National Standards 3 |
English PDF |
GB/T 37211.3-2022 |
Methods for chemical analysis of germanium metal - Part 3: Determination of trace impurity elements - Glow discharge mass spectrometry {译} 金属锗化学分析方法 第3部分:痕量杂质元素的测定 辉光放电质谱法 |
China National Standards 3 |
English PDF |
GB/T 13477.23-2022 |
Test methods for building sealing materials - Part 23: Determination of durability after tension-compression cycles under artificial accelerated weathering {译} 建筑密封材料试验方法 第23部分:人工加速气候老化下拉伸-压缩循环后耐久性的测定 |
China National Standards 3 |
English PDF |
GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料 用氧指数法测定燃烧行为 第3部分:高温试验 |
China National Standards 3 |
English PDF |
GB/T 7994.3-2022 |
Test methods for glass-lined equipment - Part 3: Mechanical shock resistance gunshot test {译} 搪玻璃设备试验方法 第3部分:耐机械冲击枪击试验 |
China National Standards 3 |
English PDF |
GB/T 18916.3-2022 |
Quotas for water withdrawals Part 3: Petroleum refining {译} 取水定额 第3部分:石油炼制 |
China National Standards 3 |
English PDF |
GB/T 3565.3-2022 |
Safety requirements for bicycles - Part 3: General test methods {译} 自行车安全要求 第3部分:一般试验方法 |
China National Standards 3 |
English PDF |
GB/T 42086.2-2022 |
Hydraulic transmission connection - Flange connection - Part 2: 42 MPa, DN13~DN76 series {译} 液压传动连接 法兰连接 第2部分: 42 MPa、DN13~DN76系列 |
China National Standards 3 |
English PDF |
GB/T 42086.1-2022 |
Hydraulic transmission connection flange connection Part 1: 3.5 MPa ~ 35 MPa, DN13 ~ DN127 series {译} 液压传动连接 法兰连接 第1部分:3.5 MPa~35 MPa、DN13~DN127系列 |
China National Standards 3 |
English PDF |
GB/T 33174-2022 |
Asset management management system GB/T 33173 application guide {译} 资产管理 管理体系 GB/T 33173应用指南 |
China National Standards 3 |
English PDF |
GB 9706.283-2022 |
Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of household phototherapy equipment {译} 医用电气设备 第2-83部分:家用光治疗设备的基本安全和基本性能专用要求 |
China National Standards 3 |
English PDF |
GB 7300.303-2022 |
Feed additives - Part 3: Mineral elements and their complexes (chelates) - Potassium iodate {译} 饲料添加剂 第3部分:矿物元素及其络(螯)合物 碘酸钾 |
China National Standards 3 |
English PDF |
GB/T 41633.3-2022 |
Insulating liquids - Determination of acid value - Part 3: Test methods for non-mineral insulating oils {译} 绝缘液体 酸值的测定 第3部分:非矿物绝缘油的试验方法 |
China National Standards 3 |
English PDF |
GB/T 41734.1-2022 |
Radio Frequency Identification of Animals Part 1: Consistency Assessment of Radio Frequency Identification Labels with GB/T 20563 and GB/T 22334 (Including the Issuance and Use of Manufacturer Codes) {译} 动物射频识别 第1部分:射频识别标签与GB/T 20563和GB/T 22334的一致性评估(包括制造商代码的发放和使用) |
China National Standards 3 |
English PDF |
GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat {译} 光学和光子学 环境试验方法 第23部分:低压与低温、大气温度、高温或湿热综合试验 |
China National Standards 3 |
English PDF |
GB/T 22366-2022 |
Sensory analysis - Methodology - General guidelines for the determination of smell, taste and flavor perception thresholds using the three-point forced choice method (3-AFC) {译} 感官分析 方法学 采用三点强迫选择法(3-AFC)测定嗅觉、味觉和风味觉察阈值的一般导则 |
China National Standards 3 |
English PDF |
GB/T 12085.3-2022 |
Optics and photonics - Environmental test methods - Part 3: Mechanical forces {译} 光学和光子学 环境试验方法 第3部分:机械作用力 |
China National Standards 3 |
English PDF |
GB/T 38659.3-2022 |
Electromagnetic compatibility - Risk assessment - Part 3: Equipment risk analysis method {译} 电磁兼容 风险评估 第3部分:设备风险分析方法 |
China National Standards 3 |
English PDF |
GB/T 4728.13-2022 |
Graphical symbols for electrical diagrams - Part 13: Analog components {译} 电气简图用图形符号 第13部分:模拟元件 |
China National Standards 3 |
English PDF |
GB/T 25068.3-2022 |
Information technology Security techniques Network security Part 3: Threats, design techniques and controls for network access scenarios {译} 信息技术 安全技术 网络安全 第3部分:面向网络接入场景的威胁、设计技术和控制 |
China National Standards 3 |
English PDF |
GB/T 3836.36-2022 |
Explosive atmospheres - Part 36: Electrical safety devices for the control of potential sources of ignition in explosion-proof equipment {译} 爆炸性环境 第36部分:控制防爆设备潜在点燃源的电气安全装置 |
China National Standards 3 |
English PDF |
GB/T 39141.3-2022 |
Inorganic and sapphire watch glasses - Part 3: Qualitative standards and test methods {译} 无机和蓝宝石手表玻璃 第3部分:定性标准和试验方法 |
China National Standards 3 |
English PDF |
GB/T 1499.3-2022 |
Steel for reinforced concrete - Part 3: Welded mesh for reinforcement {译} 钢筋混凝土用钢 第3部分:钢筋焊接网 |
China National Standards 3 |
English PDF |
GB/T 41801.3-2022 |
Information technology - Biometric identification systems on cards - Part 3: Logical information exchange mechanism {译} 信息技术 卡上生物特征识别系统 第3部分:逻辑信息交换机制 |
China National Standards 3 |
English PDF |
GB/T 5169.31-2022 |
Fire Hazard Tests for Electrical and Electronic Products - Part 31: Surface Spread of Flame - General Rules {译} 电工电子产品着火危险试验 第31部分:火焰表面蔓延 总则 |
China National Standards 3 |
English PDF |
GB/T 41985-2022 |
230MeV~250MeV superconducting proton cyclotron {译} 230MeV~250MeV超导质子回旋加速器 |
China National Standards 3 |
English PDF |
GB/T 20626.3-2022 |
Special environmental conditions High altitude electrical and electronic products - Part 3: Protection requirements for lightning, pollution and condensation {译} 特殊环境条件 高原电工电子产品 第3部分:雷电、污秽、凝露的防护要求 |
China National Standards 3 |
English PDF |
GB/T 41997.3-2022 |
Electrical safety of machinery Vision-based electro-sensitive protective equipment Part 3: Special requirements for protective devices using stereo vision {译} 机械电气安全 基于视觉的电敏保护设备 第3部分:采用立体视觉保护器件特殊要求 |
China National Standards 3 |
English PDF |
GB/T 41771.3-2022 |
Field Device Integration Part 3: Servers {译} 现场设备集成 第3部分:服务器 |
China National Standards 3 |
English PDF |
GB/T 41866.3-2022 |
Systems and software engineering - Performance benchmarking framework for information technology projects - Part 3: Reporting {译} 系统与软件工程 信息技术项目绩效基准度量框架 第3部分:报告编制 |
China National Standards 3 |
English PDF |
GB/T 35031.302-2022 |
User end energy management system Part 3-2: Subsystem interface gateway data configuration {译} 用户端能源管理系统 第3-2部分:子系统接口网关数据配置 |
China National Standards 3 |
English PDF |
GB/T 9239.23-2022 |
Mechanical vibration - Rotor balancing - Part 23: Guards and other protective measures for measuring stations of balancing machines {译} 机械振动 转子平衡 第23部分:平衡机测量工位的防护罩和其他保护措施 |
China National Standards 3 |
English PDF |
GB/T 18268.32-2022 |
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 32: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) - Indu {译} 测量、控制和实验室用的电设备 电磁兼容性要求 第32部分:安全相关系统和预期执行安全相关功能(功能安全)设备的抗扰度要求 特定电磁环境的工业应用 |
China National Standards 3 |
English PDF |
GB/T 18268.31-2022 |
Electrical equipment for measurement, control and laboratory use - Electromagnetic compatibility requirements - Part 31: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) Genera {译} 测量、控制和实验室用的电设备 电磁兼容性要求 第31部分:安全相关系统和预期执行安全相关功能(功能安全)设备的抗扰度要求 一般工业应用 |
China National Standards 3 |
English PDF |
GB/T 40778.3-2022 |
Internet of things—System implementation for Web open services—Part 3: Object discovery methods {译} 物联网 面向Web开放服务的系统实现 第3部分:物体发现方法 |
China National Standards 3 |
English PDF |
GB/T 19892.3-2022 |
Batch control - Part 3: Generic and field formulation models and representations {译} 批控制 第3部分:通用和现场处方模型及表述 |
China National Standards 3 |
English PDF |
GB/T 6150.13-2022 |
Methods for chemical analysis of tungsten concentrates - Part 13: Determination of arsenic content - Atomic fluorescence spectrometry and DDTC-Ag spectrophotometry {译} 钨精矿化学分析方法 第13部分:砷含量的测定 原子荧光光谱法和DDTC-Ag分光光度法 |
China National Standards 3 |
English PDF |
GB/T 19042.5-2022 |
Evaluation and routine tests in medical imaging sector - Part 3-5: X-ray computed tomography equipment imaging performance acceptance test and stability test {译} 医用成像部门的评价及例行试验 第3-5部分:X射线计算机体层摄影设备成像性能验收试验与稳定性试验 |
China National Standards 3 |
English PDF |
GB/T 36917.3-2022 |
Dentistry - Laboratory cutting tools - Part 3: Carbide cutting tools for milling machines {译} 牙科学 技工室用刃具 第3部分:铣床用硬质合金刃具 |
China National Standards 3 |
English PDF |
GB/T 1844.3-2022 |
Plastics - Symbols and abbreviations - Part 3: Plasticizers {译} 塑料 符号和缩略语 第3部分:增塑剂 |
China National Standards 3 |
English PDF |
GB/T 15623.3-2022 |
Hydraulic transmission - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves {译} 液压传动 电调制液压控制阀 第3部分:压力控制阀试验方法 |
China National Standards 3 |
English PDF |
GB/T 38265.3-2022 |
Test methods for soldering fluxes - Part 3: Determination of acid value - Potentiometric and visual titration {译} 软钎剂试验方法 第3部分:酸值的测定 电位滴定法和目视滴定法 |
China National Standards 3 |
English PDF |
GB/T 20092.3-2022 |
Chinese News Information Content Part 3: XML Format for Data Exchange {译} 中文新闻信息内容 第3部分:数据交换的XML格式 |
China National Standards 3 |
English PDF |
GB/T 41894.3-2022 |
Ships and Offshore Technology Determination of Shaft Power in Ship Propulsion Systems by Measuring Shaft Deformation Part 3: Elastic Vibration Method {译} 船舶与海上技术 通过测量轴变形量确定船舶推进系统轴功率 第3部分:弹性振动法 |
China National Standards 3 |
English PDF |
GB/T 18916.63-2022 |
Water withdrawal quotas - Part 63: Flat glass {译} 取水定额 第63部分:平板玻璃 |
China National Standards 3 |
English PDF |
GB/T 41979.3-2022 |
Friction stir spot welding of aluminum and aluminum alloys - Part 3: Skill assessment of welding operators {译} 搅拌摩擦点焊 铝及铝合金 第3部分:焊接操作工的技能评定 |
China National Standards 3 |
English PDF |
GB/T 41734.3-2022 |
Radio Frequency Identification of Animals Part 3: Performance Evaluation of Radio Frequency Identification Tags Conforming to GB/T 20563 and GB/T 22334 {译} 动物射频识别 第3部分:符合GB/T 20563和GB/T 22334的射频识别标签性能评估 |
China National Standards 3 |
English PDF |
GB/T 41734.2-2022 |
Radio Frequency Identification of Animals Part 2: Consistency Assessment of Radio Frequency Identification Readers and GB/T 20563 and GB/T 22334 {译} 动物射频识别 第2部分:射频识别读写器与GB/T 20563和GB/T 22334的一致性评估 |
China National Standards 3 |
English PDF |
GB/T 36148.3-2022 |
Ships and offshore technology - Protection of the offshore environment - Oil booms - Part 3: End connectors {译} 船舶与海上技术 海上环境保护 围油栏 第3部分:端部连接器 |
China National Standards 3 |
English PDF |
GB/T 30966.3-2022 |
Wind turbines - Communications for wind farm monitoring systems - Part 3: Information exchange model {译} 风力发电机组 风力发电场监控系统通信 第3部分:信息交换模型 |
China National Standards 3 |
English PDF |
GB/T 40987.3-2021 |
Public library professional work specifications—Part 3:County public library 公共图书馆业务规范 第3部分:县级公共图书馆 |
China National Standards 3 |
English PDF |
GB 9706.239-2021 |
Medical electrical equipment—Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment 医用电气设备 第2-39部分:腹膜透析设备的基本安全和基本性能专用要求 |
China National Standards 3 |
English PDF |
GB 9706.243-2021 |
Medical electrical equipment—Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures 医用电气设备 第2-43部分:介入操作X射线设备的基本安全和基本性能专用要求 |
China National Standards 3 |
English PDF |
GB/T 40456-2021 |
Detection and identification of Vryburgia amaryllidis (Bouché, 1837) 石蒜弗粉蚧检疫鉴定方法 |
China National Standards 3 |
English PDF |
GB/T 40523.3-2021 |
Ships and marine technology—Measurement of changes in hull and propeller performance—Part 3: Alternative methods 船舶与海上技术 船体和螺旋桨性能变化测量 第3部分:替代方法 |
China National Standards 3 |
English PDF |
GB/T 40426.3-2021 |
Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material 塑料制品 装饰性实体面材 第3部分:性能的测定 非板型实体面材 |
China National Standards 3 |
English PDF |
GB/T 40417-2021 |
Electronic specialty gas—1,3-Hexafluorobutadiene 电子特气 六氟丁二烯 |
China National Standards 3 |
English PDF |
GB/T 40296-2021 |
Practical superconducting wires—Twist pitch measurement method of Nb-Ti and Nb3Sn composite superconductors 实用超导线 铌-钛(Nb-Ti)与铌三锡(Nb3Sn)复合超导体的扭距测量方法 |
China National Standards 3 |
English PDF |
GB/T 40283.3-2021 |
Automation systems and integration—Interoperability of capability units for manufacturing application solutions—Part 3:Verification and validation of interoperability among capability units 自动化系统与集成 制造应用解决方案的能力单元互操作 第3部分:能力单元互操作性的验证和确认 |
China National Standards 3 |
English PDF |
GB/T 39715.3-2021 |
Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content 塑料 生物基含量 第3部分:生物基合成聚合物含量的测定 |
China National Standards 3 |
English PDF |
GB/T 38146.3-2021 |
China automotive test cycle—Part 3: Engine 中国汽车行驶工况 第3部分:发动机 |
China National Standards 3 |
English PDF |
GB/T 34015.3-2021 |
Recovery of traction battery used in electric vehicle—Echelon use—Part 3:Echelon using requirement 车用动力电池回收利用 梯次利用 第3部分:梯次利用要求 |
China National Standards 3 |
English PDF |
GB/T 33863.13-2021 |
OPC unified architecture—Part 13: Aggregates OPC统一架构 第13部分:聚合 |
China National Standards 3 |
English PDF |
GB/T 33521.32-2021 |
Mechanical vibration—Ground-borne noise and vibration arising from rail systems—Part 32: Measurement of dynamic properties of the ground 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第32部分:大地的动态性能测量 |
China National Standards 3 |
English PDF |
GB/T 33047.3-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法(TG) 第3部分:使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 |
China National Standards 3 |
English PDF |
GB/T 26519.3-2021 |
Persulfate for industrial use—Part 3:Ammonium persulfate for industrial use 工业过硫酸盐 第3部分:工业过硫酸铵 |
China National Standards 3 |
English PDF |
GB/T 20485.43-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准 |
China National Standards 3 |
English PDF |
GB/T 20485.32-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第32部分:谐振测试 用冲击激励测试加速度计的频率和相位响应 |
China National Standards 3 |
English PDF |
GB/T 15972.31-2021 |
Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile strength 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度 |
China National Standards 3 |
English PDF |
GB/T 20081.3-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分:测试减压阀流量特性的可选方法 |
China National Standards 3 |
English PDF |
GB/T 16840.3-2021 |
Technical determination methods for electrical fire evidence—Part 3: Auger electron spectroscopy component analytic method 电气火灾痕迹物证技术鉴定方法 第3部分:俄歇分析法 |
China National Standards 3 |
English PDF |
GB 9706.239-2021 |
Medical electrical equipment—Part 2-39:Particular requirements for basic safety and essential performance of peritoneal dialysis equipment 医用电气设备 第2-39部分:腹膜透析设备的基本安全和基本性能专用要求 |
China National Standards 3 |
English PDF |
GB/T 40473.3-2021 |
Banking application system—Nonfunctional requirement—Part 3: Performance efficiency 银行业应用系统 非功能需求 第3部分:性能效率 |
China National Standards 3 |
English PDF |
GB/T 27926.3-2021 |
Financial services—Universal financial industry message scheme—Part 3:Modelling 金融服务 金融业通用报文方案 第3部分:建模导则 |
China National Standards 3 |
English PDF |
GB/T 22576.3-2021 |
Medical laboratories-Requirements for quality and competence-Part 3:Requirements in the field of urine examination 医学实验室 质量和能力的要求 第3部分:尿液检验领域的要求 |
China National Standards 3 |
English PDF |
GB/T 40175.3-2021 |
Textiles—Methods of biochemical analysis—Part 3:Organophosphorus pesticide (enzyme-linked immunosorbent assay) 纺织品 生物化学分析方法 第3部分:有机磷类农药(酶联免疫法) |
China National Standards 3 |
English PDF |
GB/T 40096.3-2021 |
Technical specification for on-site protection equipment - Part 3: Operation module 就地化继电保护装置技术规范 第3部分:就地操作箱 |
China National Standards 3 |
English PDF |
GB/T 40094.3-2021 |
Electronic commerce data transaction—Part 3:Data interface specification 电子商务数据交易 第3部分:数据接口规范 |
China National Standards 3 |
English PDF |
GB/T 40006.3-2021 |
Plastics—Recycled plastics—Part 3:Polypropylene(PP) materials 塑料 再生塑料 第3部分:聚丙烯(PP)材料 |
China National Standards 3 |
English PDF |
GB/T 38010.3-2021 |
Spectacle frames and sunglasses electronic catalogue and identification—Part 3: Technical information 眼镜架和太阳镜电子目录与识别 第3部分:技术信息 |
China National Standards 3 |
English PDF |
GB/T 37162.3-2021 |
Hydraulic fluid power-Monitoring the level of particulate contamination of the fluid-Part 3:Use of the filter blockage technique 液压传动 液体颗粒污染度的监测 第3部分:利用滤膜阻塞技术 |
China National Standards 3 |
English PDF |
GB/T 31070.3-2021 |
Building intercom systems—Part 3:Technical requirements for specific applications 楼寓对讲系统 第3部分:特定应用技术要求 |
China National Standards 3 |
English PDF |
GB/T 29716.3-2021 |
Mechanical vibration and shock—Signal processing—Part 3:Methods of time-frequency analysis 机械振动与冲击 信号处理 第3部分:时频分析方法 |
China National Standards 3 |
English PDF |
GB/T 27021.3-2021 |
Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems 合格评定 管理体系审核认证机构要求 第3部分:质量管理体系审核与认证能力要求 |
China National Standards 3 |
English PDF |
GB/T 17739.2-2021 |
Microfilming of technical drawings and other drawing office documents—Part 2:Quality criteria and control of 35 mm silver gelatin microfilms 技术图样与技术文件的缩微摄影 第2部分: 35mm银-明胶型缩微品的质量准则与控制 |
China National Standards 3 |
English PDF |
GB/Z 17624.3-2021 |
Electromagnetic compatibility - General - Part 3: The effects of high-altitude EMP(HEMP) on civil equipment and systems 电磁兼容 综述 第3部分:高空电磁脉冲(HEMP)对民用设备和系统的效应 |
China National Standards 3 |
English PDF |
GB/T 15242.3-2021 |
Dimensions series of rod and piston dynamic seals for hydraulic cylinders-Part 3:Dimensions and tolerances of groove for co-axial seals 液压缸活塞和活塞杆动密封装置尺寸系列 第3部分:同轴密封件沟槽尺寸系列和公差 |
China National Standards 3 |
English PDF |
GB/T 10067.36-2021 |
Basic specification for electroheating and electromagnetic processing installations—Part 36:Induction through-heating installations 电热和电磁处理装置基本技术条件 第36部分:感应透热装置 |
China National Standards 3 |
English PDF |
GB/T 10066.32-2021 |
Test methods for electroheating and electromagnetic processing installations-Part 32:Induction through-heating installations 电热和电磁处理装置的试验方法 第32部分:感应透热装置 |
China National Standards 3 |
English PDF |
GB/T 9966.13-2021 |
Test methods for natural stone—Part 13:Determination of water absorption coefficient by capillarity 天然石材试验方法 第13部分:毛细吸水系数的测定 |
China National Standards 3 |
English PDF |
GB/T 6113.103-2021 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-3:Radio disturbance and immunity measuring apparatus—Ancillary equipment—Disturbances power 无线电骚扰和抗扰度测量设备和测量方法规范 第1-3部分:无线电骚扰和抗扰度测量设备 辅助设备 骚扰功率 |
China National Standards 3 |
English PDF |
GB/T 2424.6-2021 |
Environmental testing-Part 3:Supporting documentation and guidance- Confirmation of the performance of temperature/humidity chambers 环境试验 第3部分:支持文件及导则 温度/湿度试验箱性能确认 |
China National Standards 3 |
English PDF |
GB/T 2424.5-2021 |
Environmental testing—Part 3:Supporting documentation and guidance—Confirmation of the performance of temperature chambers 环境试验 第3部分:支持文件及导则 温度试验箱性能确认 |
China National Standards 3 |
English PDF |
GB/T 786.3-2021 |
Fluid power systems and components—Graphical symbols and circuit diagrams—Part 3: Symbol modules and connected symbols in circuit diagrams 流体传动系统及元件 图形符号和回路图 第3部分:回路图中的符号模块和连接符号 |
China National Standards 3 |
English PDF |
GB/T 22148.3-2021 |
Test method on electromagnetic emissions—Part 3:Electronic control gear for LED modules 电磁发射的试验方法 第3部分:LED模块用电子控制装置 |
China National Standards 3 |
English PDF |
GB/T 19216.3-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards 3 |
English PDF |
GB/T 19216.2-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 |
China National Standards 3 |
English PDF |
GB/T 19216.1-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分:火焰温度不低于830 ℃的供火并施加冲击振动,额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 |
China National Standards 3 |
English PDF |
GB/T 18916.53-2021 |
Norm of water intake - Part 53: Sugar 取水定额 第53部分:食糖 |
China National Standards 3 |
English PDF |
GB/T 18216.3-2021 |
Electrical safety in low voltage distribution systems up to 1 000 V a. c. and 1 500 V d. c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第3部分:环路阻抗 |
China National Standards 3 |
English PDF |
GB/T 8897.3-2021 |
Primary batteries—Part 3:Watch batteries 原电池 第3部分:手表电池 |
China National Standards 3 |
English PDF |
GB/T 33779.3-2021 |
Guidance for special characteristic of optical fibre—Part 3:Effective area(Aeff) 光纤特性测试导则 第3部分:有效面积(Aeff) |
China National Standards 3 |
English PDF |
GB/T 39993-2021 |
Determination of permitted preservatives dimethyl oxazolidine, 7-ethylbicyclooxazolidine and 5-bromo-5-nitro-1,3-dioxane in cosmetics 化妆品中限用防腐剂二甲基噁唑烷、7-乙基双环噁唑烷和5-溴-5-硝基-1,3-二噁烷的测定 |
China National Standards 3 |
English PDF |
GB/T 39652.3-2021 |
Emergency response guideline for transportation of dangerous goods—Part 3:Response distance 危险货物运输应急救援指南 第3部分:救援距离 |
China National Standards 3 |
English PDF |
GB/T 36625.3-2021 |
Smart city-Data fusion-Part 3:Data acquisition specifications 智慧城市 数据融合 第3部分:数据采集规范 |
China National Standards 3 |
English PDF |
GB/T 29186.3-2021 |
Evaluation of brand value elements-Part 3:Quality elements 品牌价值要素评价 第3部分:质量要素 |
China National Standards 3 |
English PDF |
GB/T 25000.30-2021 |
Systems and software engineering—Systems and software quality requirements and evaluation(SQuaRE)—Part 30:Quality requirements framework 系统与软件工程 系统与软件质量要求和评价(SQuaRE) 第30部分:质量需求框架 |
China National Standards 3 |
English PDF |
GB/T 23286.3-2021 |
Document management-Electronic document file format for long-term preservation-Part 3:Use of ISO 32000-1 with support for embedded files (PDF/A-3) 文献管理 长期保存的电子文档文件格式 第3部分:支持嵌入式文件的ISO 32000-1 的使用(PDF/A-3) |
China National Standards 3 |
English PDF |
GB/T 19346.3-2021 |
Methods of measurement of amorphous and nanocrystalline alloys-Part 3:AC magnetic properties of Fe-based amorphous strip using a single sheet specimen 非晶纳米晶合金测试方法 第3部分:铁基非晶单片试样交流磁性能 |
China National Standards 3 |
English PDF |
GB/T 15972.43-2021 |
Specifications for optical fibre test methods—Part 43: Measurement methods and test procedures for transmission characteristics—Numerical aperture 光纤试验方法规范 第43部分:传输特性的测量方法和试验程序 数值孔径 |
China National Standards 3 |
English PDF |
GB/T 15972.34-2021 |
Specifications for optical fibre test methods—Part 34:Measurement methods and test procedures for mechanical characteristics—Fibre curl 光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲 |
China National Standards 3 |
English PDF |
GB/T 15972.30-2021 |
Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test 光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验 |
China National Standards 3 |
English PDF |
GB/T 3883.309-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 309: Particular requirements for transportable mitre saws 手持式、可移式电动工具和园林工具的安全 第309部分:可移式斜切锯的专用要求 |
China National Standards 3 |
English PDF |
GB/T 3883.305-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 305: Particular requirements for transportable bench grinders 手持式、可移式电动工具和园林工具的安全 第305部分:可移式台式砂轮机的专用要求 |
China National Standards 3 |
English PDF |
GB/T 3883.302-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 302: Particular requirements for transportable table saws 手持式、可移式电动工具和园林工具的安全 第302部分:可移式台锯的专用要求 |
China National Standards 3 |
English PDF |
GB/T 3480.3-2021 |
Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth bending strength 直齿轮和斜齿轮承载能力计算 第3部分:轮齿弯曲强度计算 |
China National Standards 3 |
English PDF |
GB/T 3488.3-2021 |
Hardmetals—Metallographic determination of microstructure—Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals 硬质合金 显微组织的金相测定 第3部分:Ti(C,N)和WC立方碳化物基硬质合金显微组织的金相测定 |
China National Standards 3 |
English PDF |
GB/T 39959-2021 |
Liquid pumps and pump units -- Noise test code -- Grades 2 and 3 of accuracy 液体泵和泵机组 噪声试验方法 2级和3级 |
China National Standards 3 |
English PDF |
GB/T 39949.3-2021 |
Hydraulic fluid power—Mounting dimensions for accessories of single rod cylinder—Part 3: 16 MPa compact series with bores from 250mm to 500mm 液压传动 单杆缸附件的安装尺寸 第3部分:16 MPa缸径250 mm~500 mm紧凑型系列 |
China National Standards 3 |
English PDF |
GB/T 39831-2021 |
Hydraulic fluid power—Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10—Clamping dimensions 液压传动 规格02、03、05、07、08和10的四油口叠加阀和方向控制阀 夹紧尺寸 |
China National Standards 3 |
English PDF |
GB/T 39693.3-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分:用超低橡胶硬度(VLRH)标尺 测定定试验力硬度 |
China National Standards 3 |
English PDF |
GB/T 34080.3-2021 |
Security specification of electronic government common platform based on cloud computing -- Part 3: Service security 基于云计算的电子政务公共平台安全规范 第3部分:服务安全 |
China National Standards 3 |
English PDF |
GB/T 34078.3-2021 |
General specification of electronic government common platform based on cloud computing -- Part 3: Service management 基于云计算的电子政务公共平台总体规范 第3部分:服务管理 |
China National Standards 3 |
English PDF |
GB/T 34077.3-2021 |
Management specification of electronic government common platformbased on cloud computing -- Part 3: Operation guarantee management 基于云计算的电子政务公共平台管理规范 第3部分:运行保障管理 |
China National Standards 3 |
English PDF |
GB/T 28170.2-2021 |
Information technology—Computer graphics and image processing—Extensible 3D(X3D)—Part 2: Scene access interface(SAI) 信息技术 计算机图形和图像处理 可扩展三维组件(X3D) 第2部分:场景访问接口(SAI) |
China National Standards 3 |
English PDF |
GB/T 18802.32-2021 |
Low-voltage surge protective devices—Part 32: Surge protective devices connected to photovoltaic installations—Selection and application principles 低压电涌保护器 第32部分:用于光伏系统的电涌保护器 选择和使用导则 |
China National Standards 3 |
English PDF |
GB/T 18802.31-2021 |
Low-voltage surge protective devices -- Part 31: Surge protective devices connected to photovoltaic installations -- Requirements and test methods 低压电涌保护器 第31部分:用于光伏系统的电涌保护器 性能要求和试验方法 |
China National Standards 3 |
English PDF |
GB/T 18329.4-2021 |
Plain bearings—Metallic multilayer plain bearings—Part 4:Non-destructive ultrasonic transmission testing of bond of thickness greater than or equal to 0.3 mm 滑动轴承 多层金属滑动轴承 第4部分: 合金厚度≥0.3mm的结合质量超声穿透无损检测 |
China National Standards 3 |
English PDF |
GB/T 18329.3-2021 |
Plain bearings—Metallic multilayer plain bearings—Part 3: Non-destructive penetrant testing 滑动轴承 多层金属滑动轴承 第3部分:无损渗透检验 |
China National Standards 3 |
English PDF |
GB/T 17901.3-2021 |
Information technology—Security techniques—Key management—Part 3: Mechanisms using asymmetric techniques 信息技术 安全技术 密钥管理 第3部分:采用非对称技术的机制 |
China National Standards 3 |
English PDF |
GB/T 11313.35-2021 |
Radio-frequency connectors—Part 35: Sectional specification for 2.92 series R.F connectors 射频连接器 第35部分: 2.92系列射频连接器分规范 |
China National Standards 3 |
English PDF |
GB/T 10001.3-2021 |
Public information graphical symbols—Part 3:Symbols for passenger and cargo transport 公共信息图形符号 第3部分:客运货运符号 |
China National Standards 3 |
English PDF |
GB/T 7308.3-2021 |
Plain bearings—Thin-walled half bearings with or without flange—Part 3: Measurement of peripheral length 滑动轴承 有法兰或无法兰薄壁轴瓦 第3部分:周长测量 |
China National Standards 3 |
English PDF |
GB/T 5095.2503-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-3: Test 25c: Rise time degradation 电子设备用机电元件 基本试验规程及测量方法 第25-3部分:试验25c:上升时间衰减 |
China National Standards 3 |
English PDF |
GB/T 5095.2307-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors 电子设备用机电元件 基本试验规程及测量方法 第23-7部分:屏蔽和滤波试验 试验23g:连接器的有效转移阻抗 |
China National Standards 3 |
English PDF |
GB/T 5095.2304-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain 电子设备用机电元件 基本试验规程及测量方法 第23-4部分:屏蔽和滤波试验 试验23d:时域内传输线的反射 |
China National Standards 3 |
English PDF |
GB/T 5095.2303-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c:Shielding effectiveness of connectors and accessories—Line injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分:屏蔽和滤波试验 试验23c:连接器和附件的屏蔽效果 线注入法 |
China National Standards 3 |
English PDF |
GB/T 1406.3-2021 |
Types and dimensions of lamp caps—Part 3:Prefocus caps 灯头的型式和尺寸 第3部分:预聚焦式灯头 |
China National Standards 3 |
English PDF |
GB/T 14914.3-2021 |
The specification for marine observation -- Part 3: Surface and subsurface buoy-based observation 海洋观测规范 第 3 部分:浮标潜标观测 |
China National Standards 3 |
English PDF |
GB/T 8563.3-2021 |
Classification and codes for information of reward and disciplinary action -- Part 3: Codes of disciplinary action and organizational punishment 奖励、纪律处分信息分类与代码? 第3部分:纪律处分和组织处理代码 |
China National Standards 3 |
English PDF |
GB/T 41205.3-2021 |
Code and attribute description of emergency supplies -- Part 3: Search and rescue equipment 应急物资编码与属性描述 第3部分:搜救设备 |
China National Standards 3 |
English PDF |
GB/T 41108.3-2021 |
Safety of machinery -- Safety requirements for interlocking devices -- Part 3: Trapped key interlocking devices and systems 机械安全 联锁装置的安全要求 第3部分:截留钥匙联锁装置及系统 |
China National Standards 3 |
English PDF |
GB/T 41123.3-2021 |
Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification 无损检测 工业射线计算机层析成像检测 第3部分:验证 |
China National Standards 3 |
English PDF |
GB/T 41105.3-2021 |
Non-destructive testing -- Measurement and evaluation of the X-ray tube voltage -- Part 3: Spectrometric method 无损检测? X射线管电压的测量和评价 第3部分:能谱法 |
China National Standards 3 |
English PDF |
GB/T 41104.3-2021 |
Solder wire, solid and flux cored -- Specifications and test methods -- Part 3: Wetting balance test method for flux cored solder wire efficacy 实心和药芯软钎料丝? 规范和试验方法? 第3部分:药芯软钎料丝功效的润湿平衡试验方法 |
China National Standards 3 |
English PDF |
GB/T 38265.13-2021 |
Test methods for soft soldering fluxes—Part 13: Determination of flux spattering 软钎剂试验方法 第13部分:钎剂溅散性的测定 |
China National Standards 3 |
English PDF |
GB/T 8100.3-2021 |
Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves 液压阀安装面 第3部分:减压阀、顺序阀、卸荷阀、节流阀和单向阀 |
China National Standards 3 |
English PDF |
GB/T 41106.3-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 3: Sort of rotary rides 大型游乐设施 检查、维护保养与修理 第3部分:旋转类 |
China National Standards 3 |
English PDF |
GB/T 41101.3-2021 |
Earth-moving machinery -- Sustainability -- Part 3: Used machines 土方机械? 可持续性? 第3部分:二手机器 |
China National Standards 3 |
English PDF |
GB/T 25684.13-2021 |
Earth-moving machinery—Safety—Part 13: Requirements for rollers 土方机械 安全 第13部分:压路机的要求 |
China National Standards 3 |
English PDF |
GB/T 25684.3-2021 |
Earth-moving machinery—Safety—Part 3: Requirements for loaders 土方机械 安全 第3部分:装载机的要求 |
China National Standards 3 |
English PDF |
GB/T 7991.3-2021 |
Test method of viterous and porcelain enamels -- Part 3: Determination of resistance to thermal shock 搪玻璃层试验方法 第3部分:耐温差急变性能的测定 |
China National Standards 3 |
English PDF |
GB/T 25808-2021 |
Sulphur black 2BR、3B 200% 硫化黑2BR、3B 200% |
China National Standards 3 |
English PDF |
GB/T 1927.3-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood 无疵小试样木材物理力学性质试验方法 第3部分:生长轮宽度和晚材率测定 |
China National Standards 3 |
English PDF |
GB/T 17215.673-2021 |
Electricity metering data exchange -- The DLMS/COSEM suite -- Part 73: Wired and wireless M-Bus communication profiles for local and neighbourhood networks 电测量数据交换 DLMS/COSEM组件 第73部分:本地和社区网络的有线和无线M-Bus通信配置 |
China National Standards 3 |
English PDF |
GB/T 30104.303-2021 |
Digital addressable lighting interface—Part 303: Particular requirements—Input devices—Occupancy sensor 数字可寻址照明接口 第303部分:特殊要求 输入设备 占位传感器 |
China National Standards 3 |
English PDF |
GB/T 30104.302-2021 |
Digital addressable lighting interface -- Part 302: Particular requirements -- Input devices -- Absolute input devices 数字可寻址照明接口 第302部分:特殊要求 输入设备 绝对输入设备 |
China National Standards 3 |
English PDF |
GB/T 30104.301-2021 |
Digital addressable lighting interface—Part 301: Particular requirements—Input devices—Push buttons 数字可寻址照明接口 第301部分:特殊要求 输入设备 按钮 |
China National Standards 3 |
English PDF |
GB/T 21437.3-2021 |
Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines 道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第3部分:对耦合到非电源线电瞬态的抗扰性 |
China National Standards 3 |
English PDF |
GB/T 18978.304-2021 |
Ergonomics of human-system interaction—Part 304: User performance test methods for electronic visual displays 人-系统交互工效学 第304部分:电子视觉显示器的用户绩效测试方法 |
China National Standards 3 |
English PDF |
GB/T 17934.3-2021 |
Graphic technology -- Process control for the production of half-tone colour separations, proofs and production prints -- Part 3: Coldset offset lithography on newsprint 印刷技术? 网目调分色版、样张和生产印刷品的加工过程控制? 第3部分:新闻纸冷固型平版胶印 |
China National Standards 3 |
English PDF |
GB/T 35484.3-2021 |
Earth-moving machinery and mobile road construction machinery—Worksite data exchange—Part 3:Telematics data 土方机械和移动式道路施工机械 工地数据交换 第3部分:远程信息处理数据 |
China National Standards 3 |
English PDF |
GB/T 18691.3-2021 |
Agricultural irrigation equipment—Irrigation valves—Part 3: Check valves 农业灌溉设备 灌溉阀 第3部分:止回阀 |
China National Standards 3 |
English PDF |
GB/T 17626.31-2021 |
Electromagnetic compatibility—Testing and measurement techniques—Part 31:AC mains ports broadband conducted disturbance immunity test 电磁兼容 试验和测量技术 第31部分:交流电源端口宽带传导骚扰抗扰度试验 |
China National Standards 3 |
English PDF |
GB/T 20882.3-2021 |
Quality requirements for starch sugar—Part 3:Crystalline fructose and solid fructose-glucose 淀粉糖质量要求 第3部分:结晶果糖、固体果葡糖 |
China National Standards 3 |
English PDF |
GB/T 40675.3-2021 |
Noise suppression sheet for digital devices and equipment—Part 3: Characterization of parameters of noise suppression sheet 数字器件和设备用噪声抑制片 第3部分:噪声抑制片的参数特性 |
China National Standards 3 |
English PDF |
GB/T 31723.413-2021 |
Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分:电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 |
China National Standards 3 |
English PDF |
Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |