Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43524.1-2023 |
Subsea equipment Part 1: Power connectors, penetrations and jumper assemblies for rated voltages 3 kV (Umax=3.6 kV) to 30 kV (Umax=36 kV) {译} 水下设备 第1部分：额定电压3 kV（Umax＝3.6 kV）至30 kV（Umax＝36 kV）电源连接器、贯穿装置和跨接线组件 |
China National Standards 30 |
 English PDF |
| GB/T 17626.30-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 30: Power quality measurement methods {译} 电磁兼容 试验和测量技术 第30部分：电能质量测量方法 |
China National Standards 30 |
English PDF |
| GB/T 43259.302-2023 |
Energy Management System Application Programming Interface (EMS-API) Part 302: Dynamic Part of the Common Information Model (CIM) {译} 能量管理系统应用程序接口（EMS-API）第302部分：公共信息模型（CIM）的动态部分 |
China National Standards 30 |
English PDF |
| GB/T 43248-2023 |
Electric and hybrid vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz {译} 电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法 |
China National Standards 30 |
English PDF |
| GB/Z 43202.2-2023 |
Application of Robot GB/T 36530 Part 2: Application Guide {译} 机器人 GB/T 36530的应用 第2部分：应用指南 |
China National Standards 30 |
English PDF |
| GB/T 42381.130-2023 |
Data Quality Part 130: Master Data: Characteristic Data Exchange: Accuracy {译} 数据质量 第130部分：主数据：特征数据交换：准确性 |
China National Standards 30 |
English PDF |
| GB/T 3780.30-2023 |
Carbon black Part 30: Determination of high temperature volatiles Thermogravimetric method {译} 炭黑 第30部分：高温挥发物的测定 热重法 |
China National Standards 30 |
English PDF |
| GB/T 6609.30-2022 |
Chemical analysis methods and determination of physical performance of alumina—Part 30: Determination of trace elements—Wavelength dispersive X-ray fluorescence spectrometric method 氧化铝化学分析方法和物理性能测定方法 第30部分：微量元素含量的测定 波长色散X射线荧光光谱法 |
China National Standards 30 |
English PDF |
| GB/T 6609.2-2022 |
Chemical analysis methods and determination of physical performance of alumina—Part 2: Determination of loss of mass at 300 ℃ and 1000 ℃ 氧化铝化学分析方法和物理性能测定方法 第2部分：300 ℃和1000 ℃质量损失的测定 |
China National Standards 30 |
English PDF |
| GB/T 42214-2022 |
Space environment Low-altitude (300km-600km) high-energy radiation model {译} 空间环境 低高度（300km～600 km）高能辐射模型 |
China National Standards 30 |
English PDF |
| GB/T 42207.5-2022 |
Connectors for electronic equipment - Product requirements - Rectangular connectors - Part 5: Detail specification for snap lock rewirable power connectors with rated voltage DC 250 V and rated current 30 A {译} 电子设备用连接器 产品要求 矩形连接器 第5部分：额定电压直流250 V额定电流30 A卡扣锁紧可重复接线电源连接器详细规范 |
China National Standards 30 |
English PDF |
| GB/T 41985-2022 |
230MeV~250MeV superconducting proton cyclotron {译} 230MeV~250MeV超导质子回旋加速器 |
China National Standards 30 |
English PDF |
| GB/T 19216.3-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards 30 |
English PDF |
| GB/T 19216.2-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 |
China National Standards 30 |
English PDF |
| GB/T 19216.1-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 |
China National Standards 30 |
English PDF |
| GB/T 25000.30-2021 |
Systems and software engineering—Systems and software quality requirements and evaluation(SQuaRE)—Part 30:Quality requirements framework 系统与软件工程 系统与软件质量要求和评价(SQuaRE) 第30部分：质量需求框架 |
China National Standards 30 |
English PDF |
| GB/T 15972.30-2021 |
Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical characteristics—Fibre proof test 光纤试验方法规范 第30部分：机械性能的测量方法和试验程序 光纤筛选试验 |
China National Standards 30 |
English PDF |
| GB/T 3883.309-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 309: Particular requirements for transportable mitre saws 手持式、可移式电动工具和园林工具的安全 第309部分：可移式斜切锯的专用要求 |
China National Standards 30 |
English PDF |
| GB/T 3883.305-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 305: Particular requirements for transportable bench grinders 手持式、可移式电动工具和园林工具的安全 第305部分：可移式台式砂轮机的专用要求 |
China National Standards 30 |
English PDF |
| GB/T 3883.302-2021 |
Safety of motor-operated hand-held, transportable and garden tools - Part 302: Particular requirements for transportable table saws 手持式、可移式电动工具和园林工具的安全 第302部分：可移式台锯的专用要求 |
China National Standards 30 |
English PDF |
| GB/T 30104.303-2021 |
Digital addressable lighting interface—Part 303: Particular requirements—Input devices—Occupancy sensor 数字可寻址照明接口 第303部分：特殊要求 输入设备 占位传感器 |
China National Standards 30 |
English PDF |
| GB/T 30104.302-2021 |
Digital addressable lighting interface -- Part 302: Particular requirements -- Input devices -- Absolute input devices 数字可寻址照明接口 第302部分：特殊要求 输入设备 绝对输入设备 |
China National Standards 30 |
English PDF |
| GB/T 30104.301-2021 |
Digital addressable lighting interface—Part 301: Particular requirements—Input devices—Push buttons 数字可寻址照明接口 第301部分：特殊要求 输入设备 按钮 |
China National Standards 30 |
English PDF |
| GB/T 18978.304-2021 |
Ergonomics of human-system interaction—Part 304: User performance test methods for electronic visual displays 人-系统交互工效学 第304部分：电子视觉显示器的用户绩效测试方法 |
China National Standards 30 |
English PDF |
| GB/T 30104.304-2021 |
Digital addressable lighting interface—Part 304:Particular requirements—Input devices—Light sensor 数字可寻址照明接口 第304部分：特殊要求 输入设备 光传感器 |
China National Standards 30 |
English PDF |
| GB/T 12668.7302-2021 |
Adjustable speed electrical power drive systems—Part 7-302:Generic interface and use of profiles for power drive systems—Mapping of profile type 2 to network technologies 调速电气传动系统 第7-302部分：电气传动系统的通用接口和使用规范 2型规范对应至网络技术 |
China National Standards 30 |
English PDF |
| GB/T 3836.30-2021 |
Explosive atmospheres—Part 30: Equipment and components in explosive atmospheres in underground mines 爆炸性环境 第30部分：地下矿井爆炸性环境用设备和元件 |
China National Standards 30 |
English PDF |
| GB/T 25085.4-2020 |
Road vehicles—Automotive cables—Part 4: Dimensions and requirements for 30 V a.c. or 60 V d.c. single-core aluminium conductor cables 道路车辆 汽车电缆 第4部分：交流30 V或直流60 V单芯铝导体电缆的尺寸和要求 |
China National Standards 30 |
English PDF |
| GB/T 25085.3-2020 |
Road vehicles—Automotive cables—Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single-core copper conductor cables 道路车辆 汽车电缆 第3部分：交流30 V或直流60 V单芯铜导体电缆的尺寸和要求 |
China National Standards 30 |
English PDF |
| GB/T 12706.2-2020 |
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 2: Cables for rated voltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV) 额定电压1 kV(Um=1.2 kV)到35 kV(Um=40.5 kV)挤包绝缘电力电缆及附件 第2部分：额定电压6 kV(Um=7.2kV)到30 kV(Um=36 kV)电缆 |
China National Standards 30 |
English PDF |
| GB/T 5169.30-2020 |
Fire hazard testing for electric and electronic products—Part 30: Heat release—Summary and relevance of test methods 电工电子产品着火危险试验 第30部分：热释放 试验方法概要和相关性 |
China National Standards 30 |
English PDF |
| GB/T 25801-2020 |
C.I. Disperse orange 30（Disperse orange S-4RL） C.I.分散橙30（分散橙S-4RL ） |
China National Standards 30 |
English PDF |
| GB/T 30269.304-2019 |
Information technology—Sensor networks—Part 304:Communication and information exchange:Technical requirements of soundwave communication system 信息技术 传感器网络 第304部分:通信与信息交换:声波通信系统技术要求 |
China National Standards 30 |
English PDF |
| GB/T 20975.30-2019 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 30：Determination of hydrogen content—Heating extraction-thermal conductivity method 铝及铝合金化学分析方法 第30部分：氢含量的测定 加热提取热导法 |
China National Standards 30 |
English PDF |
| GB/T 37462-2019 |
Locking threads with 30 degree wedge ramp 30°楔形防松螺纹 |
China National Standards 30 |
English PDF |
| GB/T 12668.7301-2019 |
Adjustable speed electrical power drive systems—Part 7-301: Generic interface and use of profiles for power drive systems—Mapping of profile type 1 to network technologies 调速电气传动系统 第7-301部分：电气传动系统的通用接口和使用规范 1型规范对应至网络技术 |
China National Standards 30 |
English PDF |
| GB/T 50548-2018 |
Surveying standard for 330kV～750kV overhead transmission lines 330kV～750kV架空输电线路勘测标准 |
China National Standards 30 |
English PDF |
| GB/T 30269.303-2018 |
Information technology—Sensor networks—Part 303: Communication and information exchange: Network layer specification for wireless sensor networks based on IP protocol 信息技术 传感器网络 第303部分：通信与信息交换：基于IP的无线传感器网络网络层规范 |
China National Standards 30 |
English PDF |
| GB/T 35033-2018 |
Measurement method on conductive properties of electromagnetic shielding material and bonding impedance of metal material for 30MHz to 1GHz 30MHz～1GHz电磁屏蔽材料导电性能和金属材料搭接阻抗测量方法 |
China National Standards 30 |
English PDF |
| GB/T 17737.302-2018 |
Coaxial communication cables—Part 1-302: Mechanical test methods—Test for eccentricity 同轴通信电缆 第1-302部分：机械试验方法 偏心度试验 |
China National Standards 30 |
English PDF |
| GB/T 4937.30-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing 半导体器件 机械和气候试验方法 第30部分：非密封表面安装器件在可靠性试验前的预处理 |
China National Standards 30 |
English PDF |
| GB/T 17737.301-2018 |
Coaxial communication cables—Part 1-301: Mechanical test methods—Test for ovality 同轴通信电缆 第1-301部分：机械试验方法 椭圆度试验 |
China National Standards 30 |
English PDF |
| GB/T 17737.308-2018 |
Coaxial communication cables—Part 1-308: Mechanical test methods—Test for tensile strength and elongation for copper-clad metals 同轴通信电缆 第1-308部分：机械试验方法 铜包金属的抗拉强度和延伸率试验 |
China National Standards 30 |
English PDF |
| GB/T 29265.307-2017 |
Information technology—Information device intelligent grouping and resource sharing—Part 307: Remote user interface 信息技术 信息设备资源共享协同服务 第307部分：远程用户界面 |
China National Standards 30 |
English PDF |
| GB/T 18916.30-2017 |
Norm of water intake—Part 30：Coking 取水定额 第30部分：炼焦 |
China National Standards 30 |
English PDF |
| GB/T 34579-2017 |
Methods of measurement and limits for radiated disturbances from plasma display panel equipment in the frequency range 150kHz to 30MHz 等离子显示设备150kHz～30MHz辐射骚扰限值和测量方法 |
China National Standards 30 |
English PDF |
| GB/T 34128-2017 |
15 MeV～30 MeV variable energy high intensity proton cyclotron 15 MeV～30 MeV可变能量强流质子回旋加速器 |
China National Standards 30 |
English PDF |
| GB/T 29618.306-2017 |
Field device tool (FDT) interface specification—Part 306: Communication profile integration—INTERBUS 现场设备工具(FDT)接口规范 第306部分：通信行规集成 INTERBUS现场总线规范 |
China National Standards 30 |
English PDF |
| GB/T 29265.302-2017 |
Information technology—Information device intelligent grouping and resource sharing—Part 302: Service type 信息技术 信息设备资源共享协同服务 第302部分：服务类型 |
China National Standards 30 |
English PDF |
| GB/T 29265.301-2017 |
Information technology—Information device intelligent grouping and resource sharing—Part 301: Device type 信息技术 信息设备资源共享协同服务 第301部分：设备类型 |
China National Standards 30 |
English PDF |
| GB/Z 26958.30-2017 |
Geometrical product specifications (GPS)—Filtration—Part 30: Robust profile filters—Basic concept 产品几何技术规范(GPS) 滤波 第30部分：稳健轮廓滤波器 基本概念 |
China National Standards 30 |
English PDF |
| GB/T 33201-2016 |
NCu30-3-0.5 alloy bar,wire,forgings and forging stock—General specification NCu30-3-0.5合金棒材、线材、锻件和锻坯 通用技术条件 |
China National Standards 30 |
English PDF |
| GB/T 29265.304-2016 |
Information technology—Information device intelligent grouping and resource sharing—Part 304: Digital media content protection 信息技术 信息设备资源共享协同服务 第304部分：数字媒体内容保护 |
China National Standards 30 |
English PDF |
| GB/T 32538.1-2016 |
Agricultural vehicles—Mechanical connections on towed vehicles—Part 1: Dimensions for hitch rings of 50/30 mm cross section 农业车辆 被牵引车辆的机械连接装置 第1部分：50mm/30mm横截面的挂接环尺寸 |
China National Standards 30 |
English PDF |
| GB/T 30269.302-2015 |
Information technology—Sensor network—Part 302: Communication and information exchange: Medium access control（MAC） and physical layer（PHY） specification for reliable wireless sensor networks 信息技术 传感器网络 第302部分：通信与信息交换：高可靠性无线传感器网络媒体访问控制和物理层规范 |
China National Standards 30 |
English PDF |
| GB/T 29618.301-2015 |
Field device tool (FDT) interface specification—Part 301: Communication profile integration—FF fieldbus specification 现场设备工具（FDT）接口规范 第301部分：通信行规集成 FF现场总线规范 |
China National Standards 30 |
English PDF |
| GB/T 18978.307-2015 |
Ergonomics of human-system interaction—Part 307: Analysis and compliance test methods for electronic visual displays 人-系统交互工效学 第307部分：电子视觉显示器的分析和符合性试验方法 |
China National Standards 30 |
English PDF |
| GB/T 31840.2-2015 |
Aluminum alloys power cables with extruded insulation for rated voltages from 1kV(Um=1.2kV)up to 35kV(Um=40.5 kV)—Part 2: Cables for rated voltages from 6kV(Um=7.2kV)up to 30kV(Um=36kV) 额定电压1kV(Um=1.2kV)到35kV(Um=40.5 kV) 铝合金芯挤包绝缘电力电缆 第2部分：额定电压6kV(Um=7.2kV)到30kV(Um=36kV)电缆 |
China National Standards 30 |
English PDF |
| GB/T 30269.301-2014 |
Information technology—Sensor networks—Part 301：Communication and information exchange: Network layer and application support sublayer technical specifications for low-rate wireless sensor networks 信息技术 传感器网络 第301部分：通信与信息交换：低速无线传感器网络网络层和应用支持子层规范 |
China National Standards 30 |
English PDF |
| GB/T 51071-2014 |
Code for design of 330kV～750kV smart substation 330kV~750kV智能变电站设计规范 |
China National Standards 30 |
English PDF |
| GB/T 30542-2014 |
Document management―Monitoring and verification of information stored on 130 mm optical media 文件管理 130mm光盘存储信息的监测和验证 |
China National Standards 30 |
English PDF |
| GB/T 29618.309-2013 |
Field device tool（FDT） interface specification - Part 309: Communication profile integration - Highway addressable remote transducer 现场设备工具（FDT）接口规范 第309部分：通信行规集成 可寻址远程传感器高速通道 |
China National Standards 30 |
English PDF |
| GB/T 29618.302-2013 |
Field device tool (FDT) interface specification - Part 302: Communication profile integration - CIP 现场设备工具（FDT）接口规范 第302部分：通信行规集成 通用工业协议 |
China National Standards 30 |
English PDF |
| GB 19079.30-2013 |
Operation conditions and technical requirements for gymnasium and playground - Part 30: Mountain outdoor place 体育场所开放条件与技术要求 第30部分：山地户外场所 |
China National Standards 30 |
English PDF |
| GB/T 29508-2013 |
300mm monocrystalline silicon as cut slices and grinded slices 300mm 硅单晶切割片和磨削片 |
China National Standards 30 |
English PDF |
| GB/T 29506-2013 |
300mm polished monocrystalline silicon wafers 300mm 硅单晶抛光片 |
China National Standards 30 |
English PDF |
| GB/T 29504-2013 |
300mm monocrystalline silicon 300mm 硅单晶 |
China National Standards 30 |
English PDF |
| GB/T 29265.306-2012 |
Information technology - Information device intelligent grouping and resource sharing - Part 306: Quality of service 信息技术 信息设备资源共享协同服务 第306部分：服务质量 |
China National Standards 30 |
English PDF |
| GB/T 29265.303-2012 |
Information technology - Information device intelligent grouping and resource sharing - Part 303: General control device description 信息技术 信息设备资源共享协同服务 第303部分：通用控制设备描述 |
China National Standards 30 |
English PDF |
| GB/T 15370.3-2012 |
General requirement of agricultural tractors - Part 3: Over 130kW wheeled tractors 农业拖拉机 通用技术条件 第3部分：130kW以上轮式拖拉机 |
China National Standards 30 |
English PDF |
| GB/T 29306.2-2012 |
Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz - Part 2 : Resonance methods 绝缘材料在300 MHz以上频率下介电性能测定方法 第2部分：谐振法 |
China National Standards 30 |
English PDF |
| GB/T 29306.1-2012 |
Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz - Part 1：General 绝缘材料在300 MHz以上频率下介电性能测定方法 第1部分：总则 |
China National Standards 30 |
English PDF |
| GB/T 29265.305-2012 |
Information technology - Information device intelligent grouping and resource sharing - Part 305：Power line communication interface 信息技术 信息设备资源共享协同服务 第305部分：电力线通信接口 |
China National Standards 30 |
English PDF |
| GB/T 18978.300-2012 |
Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements 人-系统交互工效学 第300部分：电子视觉显示要求概述 |
China National Standards 30 |
English PDF |
| GB/T 6075.2-2012 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min，1800r/min，3000r/min and 3600r/min 机械振动 在非旋转部件上测量评价机器的振动 第2部分：50MW以上，额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards 30 |
English PDF |
| GB/T 11348.2-2012 |
Mechanical vibration - Evaluation of machines vibration by measurements on rotating shafts - Part 2: Land-based steam turbine - generators in excess of 50MW with normal operating speeds of 1500r/min，1800r/min，3000r/min and 3600r/min 机械振动 在旋转轴上测量评价机器的振动 第2部分：功率大于50MW,额定工作转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards 30 |
English PDF |
| GB/T 28562-2012 |
Specification for YVF series variable frequency high voltage three-phase induction motors (Frame size 355-630) YVF系列变频调速高压三相异步电动机技术条件（机座号355～630） |
China National Standards 30 |
English PDF |
| GB/T 26869-2011 |
Insulator-Test on indoor post insulator of organic material for systems with nominal voltages greater than 1000V up to but not including 300kV 标称电压高于1000V低于300kV系统用户内有机材料支柱绝缘子的试验 |
China National Standards 30 |
English PDF |
| GB/T 11026.5-2010 |
Electrical insulating materials - Thermal endurance properties - Part 5: Ageing ovens - Precision ovens for use up to 300℃ 电气绝缘材料 耐热性 第5部分：老化烘箱 温度达300℃的精密烘箱 |
China National Standards 30 |
English PDF |
| GB/T 25801-2010 |
Disperse orange S-4RL（C.I. Disperse orange 30） 分散橙S-4RL（C.I.分散橙30） |
China National Standards 30 |
English PDF |
| GB/T 1598-2010 |
Platinum-10%Rhodium/Platinem thermocomouple wires - Platinum-13%Rhodium/Platinem thermocomouple wires - Platinum-30%Rhodium/Platinem-6%Rhodium thermocomouple wires 铂铑10-铂热电偶丝、铂铑13-铂热电偶丝、铂铑30-铂铑6热电偶丝 |
China National Standards 30 |
English PDF |
| GB/T 14506.30-2010 |
Methods for chemical analysis of silicate rocks - Part 30: Determination of 44 elements 硅酸盐岩石化学分析方法 第30部分：44个元素量测定 |
China National Standards 30 |
English PDF |
| GB/T 13071-2010 |
Geological waters samples - Determination of radioactive ratios 234U/238U and 230Th/232Th - Extraction chromatograph and alpha spectrometry measure 地质水样 234U/238U、230Th/232Th 放射性活度比值的测定 - 萃淋树脂萃取色层分离 α 能谱法 |
China National Standards 30 |
English PDF |
| GB/T 25248-2010 |
The determination of infrared cyanine dye for 830nm digital printing materials － High performance liquid chromatography 830nm数字制版材料用红外吸收菁染料含量的测定 高效液相色谱法 |
China National Standards 30 |
English PDF |
| GB/T 325.3-2010 |
Packaging container - Steel drums - Part 3：Non-removable head (tight head) drums with a minimum total capacity of 212l, 216.5l and 230l 包装容器 钢桶 第3部分：最小总容量212L、216.5L和230L闭口钢桶 |
China National Standards 30 |
English PDF |
| GB/T 17755-2010 |
Single-and three-core power cables with extruded solid insulation for rated voltages 6kV( Um=7.2kV) up to 30kV( Um=36kV) in ships 船用额定电压为6 kV（Um=7.2 kV）至30 kV（Um=36 kV）的单芯及三芯挤包实心绝缘电力电缆 |
China National Standards 30 |
English PDF |
| GB 50548-2010 |
Code for investigation and surveying of 330kV~750kV overhead transmission line 330kV~750kV架空输电线路勘测规范 |
China National Standards 30 |
English PDF |
| GB/T 15370.2-2009 |
General requirement of agricultural tractors - Part 2: 50 kW～130 kW wheeled tractors 农业拖拉机 通用技术条件 第2部分：50kW～130kW轮式拖拉机 |
China National Standards 30 |
English PDF |
| GB/T 24148.6-2009 |
Plastics - Unsaturated-polyester resins - Part 6: Determination of reactivity at 130℃ 塑料 不饱和聚酯树脂 (UP-R) 第6部分：130℃反应活性测定 |
China National Standards 30 |
English PDF |
| GB/T 23753-2009 |
Specification and technical requirements for 330kV and 500kV oil- immersed shunt reactors 330kV及500kV油浸式并联电抗器技术参数和要求 |
China National Standards 30 |
English PDF |
| GB/T 6609.30-2009 |
Chemical analysis methods and determination of physical performance of alumina - Part 30: X-ray fluorescence spectrometric method for the determination centent of trace elements 氧化铝化学分析方法和物理性能测定方法 第30部分：X射线荧光光谱法测定微量元素含量 |
China National Standards 30 |
English PDF |
| GB/T 6609.2-2009 |
Chemical analysis methods and determination of physical performance of aluminium hydroxide - Part 2: Determination of loss of mass at 300℃ and 1000℃ 氧化铝化学分析方法和物理性能测定方法 第2部分：300℃和1000℃质量损失的测定 |
China National Standards 30 |
English PDF |
| GB/T 23312.3-2009 |
Enamelled round aluminium winding wire - Part 3: Polyester enamelled round aluminium wire, class 130 漆包铝圆绕组线 第3部分：130级聚酯漆包铝圆线 |
China National Standards 30 |
English PDF |
| GB/T 9332-2008 |
Electrical installations in ships - Cables for control and instrumentation circuits 150/250V(300V) 船舶电气装置 控制和仪器回路用150/250V（300V）电缆 |
China National Standards 30 |
English PDF |
| GB/T 19216.12-2008 |
Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 12: Apparatus - Fire with shock at a temperature of at least 830℃ 在火焰条件下电缆或光缆的线路完整性试验 第12部分：试验装置 火焰温度不低于830℃的供火并施加冲击 |
China National Standards 30 |
English PDF |
| GB/T 12706.2-2008 |
Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 2: Cables for rated voltages from 6kV(Um=7.2kV) up to 30kV(Um=36kV) 额定电压1kV(Um=1.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆及附件 第2部分：额定电压6kV(Um=7.2kV)到30kV(Um=36kV)电缆 |
China National Standards 30 |
English PDF |
| GB/T 5169.30-2008 |
Fire hazard testing for electric and electronic products - Part 30: Heat release - Summary and relevance of test methods 电工电子产品着火危险试验 第30部分：热释放 试验方法概要和相关性 |
China National Standards 30 |
English PDF |
| GB/T 17645.102-2008 |
Industrial automation systems and integration - Parts library - Part 102: View exchange protocol by ISO 10303 conforming specification 工业自动化系统与集成 零件库 第102部分：符合GB/T 16656一致性规范的视图交换协议 |
China National Standards 30 |
English PDF |
| GB/T 3478.6-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 6: 30°pressure angle M and W values 圆柱直齿渐开线花键（米制模数 齿侧配合） 第6部分：30°压力角M值和W值 |
China National Standards 30 |
English PDF |
| GB/T 3478.2-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 2: 30°pressure angle dimensions tables 圆柱直齿渐开线花键（米制模数 齿侧配合） 第2部分： 30°压力角尺寸表 |
China National Standards 30 |
English PDF |
| GB/T 16841-2008 |
Guide for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV 能量为 300 keV～25 MeV 电子束辐射加工装置剂量学导则 |
China National Standards 30 |
English PDF |
| GB/T 1036-2008 |
Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer 塑料 -30℃～30℃线膨胀系数的测定 石英膨胀计法 |
China National Standards 30 |
English PDF |
| GB/T 13576.4-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 4: Tolerances 锯齿形(3°、30°)螺纹 第4部分：公差 |
China National Standards 30 |
English PDF |
| GB/T 13576.3-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic dimensions 锯齿形(3°、30°)螺纹 第3部分：基本尺寸 |
China National Standards 30 |
English PDF |
| GB/T 13576.2-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 2: General plan 锯齿形(3°、30°)螺纹 第2部分：直径与螺距系列 |
China National Standards 30 |
English PDF |
| GB/T 13576.1-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles 锯齿形(3°、30°)螺纹 第1部分：牙型 |
China National Standards 30 |
English PDF |
| GB/T 7672.2-2008 |
Glass-fiber wound winding wires - Part 2: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 130 玻璃丝包绕组线 第2部分：130级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards 30 |
English PDF |
| GB/T 11018.2-2008 |
Copper winding wires with silk covering - Part 2: Bunched solderable polyurethane enamelled round copper wires, class130, with silk covering 丝包铜绕组线 第2部分：130级丝包直焊聚氨酯漆包束线 |
China National Standards 30 |
English PDF |
| GB/T 12976.1-2008 |
Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 1: General and construction requirements for power cables with rated voltages up to and including 30kV 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第1部分：额定电压30kV及以下电缆一般规定和结构要求 |
China National Standards 30 |
English PDF |
| GB/T 7095.7-2008 |
Enamelled rectangular copper winding wires - Part 7:Polyester enamelled rectangular copper wire, class 130 漆包铜扁绕组线 第7部分：130级聚酯漆包铜扁线 |
China National Standards 30 |
English PDF |
| GB/T 6109.9-2008 |
Enamelled round winding wire - Part 9:Solderable polyurethane enamelled round copper wire overcoated with polyamide,class 130 漆包圆绕组线 第9部分：130级聚酰胺复合直焊聚氨酯漆包铜圆线 |
China National Standards 30 |
English PDF |
| GB/T 6109.7-2008 |
Enamelled round winding wire - Part 7:Polyester enamelled round copper wire,class 130L 漆包圆绕组线 第7部分：130L级聚酯漆包铜圆线 |
China National Standards 30 |
English PDF |
| GB/T 6109.4-2008 |
Enamelled round winding wire - Part 4:Solderable polyurethane enamelled round copper wire,class 130 漆包圆绕组线 第4部分：130级直焊聚氨酯漆包铜圆线 |
China National Standards 30 |
English PDF |
| GB/T 6109.15-2008 |
Enamelled round winding wire - Part 15:Solderable polyurethane enamelled round copper wire,class 130,with a bonding layer 漆包圆绕组线 第15部分：130级自粘性直焊聚氨酯漆包铜圆线 |
China National Standards 30 |
English PDF |
| GB/T 15972.30-2008 |
Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test 光纤试验方法规范 第30部分：机械性能的测量方法和试验程序 光纤筛选试验 |
China National Standards 30 |
English PDF |
| GB/T 6113.105-2008 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30MHz to 1000MHz 无线电骚扰和抗扰度测量设备和测量方法规范 第1-5部分: 无线电骚扰和抗扰度测量设备 30MHz～1000MHz天线校准用试验场地 |
China National Standards 30 |
English PDF |
| GB/T 18387-2008 |
Limits and test methods of magnetic and electric field strength from electric vehicles, Broadband, 9kHz to 30MHz 电动车辆的电磁场发射强度的限值和测量方法,宽带,9kHz～30MHz |
China National Standards 30 |
English PDF |
| GB/T 18311.30-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors 纤维光学互连器件和无源器件 基本试验和测量程序 第3-30部分：检查和测量 单套管多芯光纤连接器抛光角度和光纤位置 |
China National Standards 30 |
English PDF |
| GB/T 20841-2007 |
Heating cables with a rated voltage of 300/500V for comfort heating and prevention of ice formation 额定电压300/500V生活设施加热和防结冰用加热电缆 |
China National Standards 30 |
English PDF |
| GB/T 20636-2006 |
Connecting device - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Particular requirements for conductors above 35mm2 up to 300mm2 连接器件 电气铜导线 螺纹型和非螺纹型夹紧件的安全要求 适用于35mm2以上至300mm2导线的特殊要求 |
China National Standards 30 |
English PDF |
| GB/T 12618.2-2006 |
Open end blind rivets with break pull mandrel and protruding head―property class 30 开口型平圆头抽芯铆钉 30级 |
China National Standards 30 |
English PDF |
| GB/T 12617.2-2006 |
Open end blind rivets with break pull mandrel and countersunk head―property class 30 开口型沉头抽芯铆钉 30级 |
China National Standards 30 |
English PDF |
| GB/T 19969-2005 |
Information technology -- 130 mm optical disk cartridges for information interchange -- Capacity : 2.6 Gbytes per cartridge 信息技术 信息交换用130mm盒式光盘 容量：每盒2.6G字节 |
China National Standards 30 |
English PDF |
| GB/T 20035.2-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part2: Dimensions,tolerances and designation of cones with half angle 3°30′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第2部分：半锥角3°30′圆锥形筒管的尺寸、公差和标记 |
China National Standards 30 |
English PDF |
| GB/T 17980.130-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 130:Herbicides against weeds in latex 农药 田间药效试验准则(二) 第130部分:除草剂防治橡胶园杂草 |
China National Standards 30 |
English PDF |
| GB/T 12615.2-2004 |
Closed end blind rivets with break pull mandrel and protruding head--Property class 30 封闭型平圆头抽芯铆钉 30级 |
China National Standards 30 |
English PDF |
| GB/Z 18808-2002 |
Information technology--Technical aspects of 130 mm optical disk cartridge write-once recording format 信息技术 130 mm一次写入盒式光盘记录格式技术规范 |
China National Standards 30 |
English PDF |
| GB/T 18807-2002 |
Information technology--Data interchange on 130 mm optical disk cartridges--Capacity:1.3 gigabytes per cartridge 信息技术 130 mm盒式光盘上的数据交换容量:每盒1.3 G字节 |
China National Standards 30 |
English PDF |
| GB/T 6684-2002 |
Chemical reagent--Hydrogen peroxide 30% 化学试剂 30%过氧化氢 |
China National Standards 30 |
English PDF |
| GB/T 18141-2000 |
Information technology--Information interchange on 130 mm optical disk cartridges using themagneto-optical effect，for write once，read multiple functionality 信息技术 130 mm一次写入多次读出磁光盒式光盘的信息交换 |
China National Standards 30 |
English PDF |
| GB/T 18140-2000 |
Information technology--Data interchange on 130 mm optical disk cartridges--Capacity:1 gigabyte per cartridge 信息技术 130 mm盒式光盘上的数据交换 容量:每盒1 G字节 |
China National Standards 30 |
English PDF |
| GB/T 17960-2000 |
Information technology--Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side--GB type 303 信息技术 数据交换用90 mm改进调频制记录的位密度为31 831磁通翻转/弧度、每面80磁道的软磁盘 GB 303型 |
China National Standards 30 |
English PDF |
| GB/T 17704.2-1999 |
Information technology--130mm optical disk cartridge，write once，for information interchange--Part 2:Recording format 信息技术 信息交换用130 mm一次写入盒式光盘 第2部分:记录格式 |
China National Standards 30 |
English PDF |
| GB/T 17704.1-1999 |
Information technology--130mm optical disk cartridge，write once，for information interchange--Part 1:Unrecorded optical disk cartridge 信息技术 信息交换用130 mm一次写入盒式光盘 第1部分:未记录盒式光盘 |
China National Standards 30 |
English PDF |
| GB/T 6262-1998 |
Fixed capacitors for use in electronic equipment--Part 5:Blank detail specification--Fixed mica dielectric d.c.capacitors witha rated voltage not exceeding 3000V--Assessment level E 电子设备用固定电容器 第5部分:空白详细规范 额定电压不超过3000伏的直流云母介质固定电容器 评定水平E |
China National Standards 30 |
English PDF |
| GB/T 6261-1998 |
Fixed capacitors for use in electronic equipment--Part 5:Sectional specification--Fixed mica dielectric d.c.capacitors witha rated voltage not exceeding 3000V--Selection of methods of test and generalrequirements 电子设备用固定电容器 第5部分:分规范 额定电压不超过3000伏的直流云母介质固定电容器试验方法的选择和一般要求 |
China National Standards 30 |
English PDF |
| GB/T 16971-1997 |
Information technology--130mm rewritable optical disk cartridge for information interchange 信息技术 信息交换用130 mm可重写盒式光盘 |
China National Standards 30 |
English PDF |
| GB 16788-1997 |
Measurements and limits of immunity of cabled distribution systems primarily intended for sound and television signals operating between 30MHz and 1GHz 30 MHz～1GHz 声音和电视信号电缆分配系统抗扰度测量方法和限值 |
China National Standards 30 |
English PDF |
| GB 16787-1997 |
Measurements and limits of radiation of cabled distribution systems primarily intended for sound and television signals operating between 30MHz and 1GHz 30 MHz～1GHz 声音和电视信号的电缆分配系统辐射测量方法和限值 |
China National Standards 30 |
English PDF |
| GB/T 6879-1995 |
Performance andtest methods of the 30 channels pulse code modulation multiplex equipment at 2048 kbit/s 2048kbit/s 30路脉码调制复用设备技术要求和测试方法 |
China National Standards 30 |
English PDF |
| GB/T 15131.3-1995 |
Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad， on 80 tracks on each side--Part 3:Track formatB for 80 tracks 信息处理 数据交换用130 mm改进调频制记录的位密度为13262磁通翻转/弧度、每面80条磁道的软磁盘 第三部分:磁道格式B(用于80条磁道) |
China National Standards 30 |
English PDF |
| GB/T 15131.2-1995 |
Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad， on 80 tracks on each side--Part 2:Track format A for 77 tracks 信息处理 数据交换用130 mm改进调频制记录的位密度为13262磁通翻转/弧度、每面80条磁道的软磁盘 第二部分:磁道格式 A ( 用于77条磁道) |
China National Standards 30 |
English PDF |
| GB/T 15131.1-1994 |
Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad，on 80 tracks on each side--Part 1:Dimensional， physical and magnetic characteristics 信息处理 数据交换用130 mm改进调频制记录的位密度为13262 磁通翻转/弧度、每面80条磁道的软磁盘 第一部分:尺寸、物理性能和磁性能 |
China National Standards 30 |
English PDF |
| GB/T 13859-1992 |
Performance andtest methods of 30-channel pulse code modulation drop/insert equipment at 2048kbit/s 2048kbit/s 30路脉码调制分插设备技术要求与测试方法 |
China National Standards 30 |
English PDF |
| GB 50163-1992 |
Code for design of halon 1301 fire extinguishing systems 卤代烷1301灭火系统设计规范 |
China National Standards 30 |
English PDF |
| GB/T 9025-1988 |
Cabled distribution systems primarily intended for sound and television signals operating between30 MHz and 1 GHz--Electrical and mechanical matching values 30 MHz～1GHz声音和电视信号的电缆分配系统 机电配接值 |
China National Standards 30 |
English PDF |
| GB/T 8977-1988 |
300Ω/75Ω balun for FM and TV broadcast receiver 调频、电视广播接收机用300Ω/75Ω 平衡-不平衡阻抗变换器 |
China National Standards 30 |
English PDF |
| GB/T 7620-1987 |
300 bits per second duplex modem standardized for use in the general switched telephone network 在电话自动交换网上使用的标准化300比特/秒全双工调制解调器 |
China National Standards 30 |
English PDF |
| GB/T 7343-1987 |
Methods of measurement of the suppresion characteristics of passive radio interference filters and suppression components over the frequency range of 10kHz to 30MHz 10 kHz～30 MHz无源无线电干扰滤波器和抑制元件抑制特性的测量方法 |
China National Standards 30 |
English PDF |
| Find out:149Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
