Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 27021.5-2018 |
Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 5: Competence requirements for auditing and certification of asset management systems 合格评定-管理体系审核认证机构要求-第5部分:资产管理体系审核和认证能力要求 |
China National Standards 5, |
English PDF |
GB/T 25122.5-2018 |
Railway applications—Power converters installed on board rolling stock—Part 5:Traction converter for urban rail vehicle 轨道交通-机车车辆用电力变流器-第5部分:城轨车辆牵引变流器 |
China National Standards 5, |
English PDF |
GB/T 19290.6-2018 |
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-4: Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Adaptation dimensions for subracks or chassis applica 发展中的电子设备构体机械结构模数序列-第2-4部分:分规范-25-mm设备构体的接口协调尺寸-适用于符合IEC-60297-3-100(19-in)机柜或机架的插箱或机箱的适配尺寸 |
China National Standards 5, |
English PDF |
GB/T 17215.653-2018 |
Electricity metering data exchange—The DLMS/COSEM suite—Part 53: DLMS/COSEM application layer 电测量数据交换-DLMS/COSEM组件-第53部分:DLMS/COSEM-应用层 |
China National Standards 5, |
English PDF |
GB/T 32852.5-2018 |
Urban passenger transportation terminology—Part 5:Car rental 城市客运术语-第5部分:汽车租赁 |
China National Standards 5, |
English PDF |
GB/T 10067.415-2018 |
Basic specifications for electroheating installations—Part 415:Aluminum annealing furnace 电热装置基本技术条件-第415部分:铝材退火炉 |
China National Standards 5, |
English PDF |
GB/T 6113.105-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-5:Radio disturbance and immunity measuring apparatus—Antenna calibration sites and reference test sites for 5 MHz to 18 GHz 无线电骚扰和抗扰度测量设备和测量方法规范-第1-5部分:无线电骚扰和抗扰度测量设备-5MHz~18GHz天线校准场地和参考试验场地 |
China National Standards 5, |
English PDF |
GB/T 5170.15-2018 |
Inspection methods for environmental testing equipments—Part 15:Hydraulic vibrating type system for vibration(sinusoidal) test 环境试验设备检验方法-第15部分:振动(正弦)试验用液压式振动系统 |
China National Standards 5, |
English PDF |
GB/T 742-2018 |
Fibrous raw material, pulp, paper and board—Determination of residue(ash) on ignition at 575℃ and 900℃ 造纸原料、纸浆、纸和纸板-灼烧残余物(灰分)的测定(575℃和900℃) |
China National Standards 5, |
English PDF |
GB/T 31370.5-2018 |
Test method of flat panel display (FPD) color filters—Part 5: Contrast ratio 平板显示器(FPD)彩色滤光片测试方法-第5部分:对比度 |
China National Standards 5, |
English PDF |
GB/T 50548-2018 |
Surveying standard for 330kV~750kV overhead transmission lines 330kV~750kV架空输电线路勘测标准 |
China National Standards 5, |
English PDF |
GB 15208.5-2018 |
Micro-dose X-ray security inspection system—Part 5:Backscatter object security inspection system 微剂量X射线安全检查设备-第5部分:背散射物品安全检查设备 |
China National Standards 5, |
English PDF |
GB/T 18233.5-2018 |
Information technology—Generic cabling for customer premises—Part 5: Data centres 信息技术-用户建筑群通用布缆-第5部分:数据中心 |
China National Standards 5, |
English PDF |
GB/T 36214.5-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分:光散射法 |
China National Standards 5, |
English PDF |
GB/T 34880.3-2018 |
Inspection condition for 5-axis simultaneous machining center—Part 3: Specifications 五轴联动加工中心检验条件 第3部分:技术条件 |
China National Standards 5, |
English PDF |
GB/T 778.5-2018 |
Meters for cold potable water and hot water—Part 5: Installation requirements 饮用冷水水表和热水水表 第5部分:安装要求 |
China National Standards 5, |
English PDF |
GB/T 35081-2018 |
Safety of machinery—Relationship of GB/T 16855.1 to GB/T 15706 机械安全 GB/T 16855.1与GB/T 15706的关系 |
China National Standards 5, |
English PDF |
GB/T 35080-2018 |
Safety of machinery—Relationship of type-B and type-C standards to GB/T 15706 机械安全 B类标准和C类标准与GB/T 15706的关系 |
China National Standards 5, |
English PDF |
GB/T 14986.5-2018 |
Soft magnetic alloys—Part 5:Iron-aluminium alloys 软磁合金 第5部分:铁铝合金 |
China National Standards 5, |
English PDF |
GB/T 36464.5-2018 |
Information technology—Intelligent speech interaction system—Part 5:In-vehicle terminal 信息技术 智能语音交互系统 第5部分:车载终端 |
China National Standards 5, |
English PDF |
GB/T 24338.6-2018 |
Railway applications—Electromagnetic compatibility—Part 5: Emission and immunity of fixed power supply apparatus and systems 轨道交通 电磁兼容 第5部分:地面供电设备和系统的发射与抗扰度 |
China National Standards 5, |
English PDF |
GB/T 18916.35-2018 |
Norm of water intake—Part 35: Methyl alcohol produced by coal 取水定额 第35部分:煤制甲醇 |
China National Standards 5, |
English PDF |
GB/T 26949.5-2018 |
Industrial trucks—Verification of stability—Part 5:Single-side-loading trucks 工业车辆 稳定性验证 第5部分:侧面式叉车(单侧) |
China National Standards 5, |
English PDF |
GB/T 33767.5-2018 |
Information technology—Biometric sample quality—Part 5: Face image data 信息技术 生物特征样本质量 第5部分:人脸图像数据 |
China National Standards 5, |
English PDF |
GB/T 11313.38-2018 |
Radio-frequency connectors—Part 38: Sectional specification for 50 Ω model,slide-in radio frequency coaxial connectors (type TMA) for rack and panel applications 射频连接器 第38部分: 50Ω背板和面板用模块滑入式射频连接器(TMA型)分规范 |
China National Standards 5, |
English PDF |
GB/T 34960.5-2018 |
Information technology service-Governance-Part 5: Specification of data governance 信息技术服务 治理 第5部分:数据治理规范 |
China National Standards 5, |
English PDF |
GB 13895-2018 |
Heavy duty gear oils for automobile (GL-5) 重负荷车辆齿轮油(GL-5) |
China National Standards 5, |
English PDF |
GB/T 12690.15-2018 |
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides―Part 15: Determination of calcium content 稀土金属及其氧化物中非稀土杂质 化学分析方法 第15部分:钙量的测定 |
China National Standards 5, |
English PDF |
GB/T 36410.5-2018 |
Energy consumption evaluation methods of port equipment—Part 5: Port tractor 港口设备能源消耗评价方法 第5部分:港口牵引车 |
China National Standards 5, |
English PDF |
GB/T 3367.5-2018 |
Glossary of terms for diesel locomotive—Part 5: Auxiliary devices 内燃机车词汇 第5部分:辅助装置 |
China National Standards 5, |
English PDF |
GB/T 36501-2018 |
Soil mapping—Specifications for color and legend of soil maps of China at the scale of 1:25000 1:50000 and 1:100000 土壤制图 1:25000 1:50000 1:100000中国土壤图用色和图例规范 |
China National Standards 5, |
English PDF |
GB/T 33260.5-2018 |
Capability of detection—Part 5: Methodology in the linear and nonlinear calibration cases 检出能力 第5部分:非线性校准情形检出限的确定方法 |
China National Standards 5, |
English PDF |
GB 5135.5-2018 |
Automatic sprinkler systems—Part 5: Deluge alarm valves 自动喷水灭火系统 第5部分:雨淋报警阀 |
China National Standards 5, |
English PDF |
GB/T 4728.5-2018 |
Graphical symbols for electrical diagrams—Part 5:Semiconductors and electron tubes 电气简图用图形符号 第5部分:半导体管和电子管 |
China National Standards 5, |
English PDF |
GB/T 9414.5-2018 |
Maintainability—Part 5: Testability and diagnostic testing 维修性 第5部分:测试性和诊断测试 |
China National Standards 5, |
English PDF |
GB/T 36364-2018 |
Information technology—Radio frequency identification—General specifications for tag at 2.45GHz 信息技术 射频识别 2.45GHz标签通用规范 |
China National Standards 5, |
English PDF |
GB/T 36435-2018 |
Information technology—Radio frequency identification—General specifications for reader at 2.45GHz 信息技术 射频识别 2.45GHz读写器通用规范 |
China National Standards 5, |
English PDF |
GB/T 19668.5-2018 |
Information technology service—Surveillance—Part 5:Software project surveillance specification 信息技术服务 监理 第5部分:软件工程监理规范 |
China National Standards 5, |
English PDF |
GB/T 7341.5-2018 |
Electroacoustics—Audiometric equipment—Part 5: Instruments for the measurement of aural acoustic impedance/admittance 电声学 测听设备 第5部分:耳声阻抗/导纳的测量仪器 |
China National Standards 5, |
English PDF |
GB/T 5169.25-2018 |
Fire hazard testing for electric and electronic products—Part 25: Smoke obscuration—General guidance 电工电子产品着火危险试验 第25部分:烟模糊 总则 |
China National Standards 5, |
English PDF |
GB/T 29618.5215-2018 |
Field device tool (FDT) interface specification—Part 5215 : Communication implementation for common language infrastructure—IEC 61784 CPF 15 现场设备工具(FDT)接口规范 第5215部分:通用语言基础结构的通信实现 IEC 61784 CPF 15 |
China National Standards 5, |
English PDF |
GB/T 29618.529-2018 |
Field device tool (FDT) interface specification—Part 529: Communication implementation for common language infrastructure—IEC 61784 CPF 9 现场设备工具(FDT)接口规范 第529部分:通用语言基础结构的通信实现 IEC 61784 CPF 9 |
China National Standards 5, |
English PDF |
GB/T 3780.25-2018 |
Carbon black—Part 25:Determination of carbon content 炭黑 第25部分:碳含量的测定 |
China National Standards 5, |
English PDF |
GB/T 29618.5232-2018 |
Field device tool (FDT) interface specification—Part 5232: Communication implementation for common language infrastructure—IEC 61784 CP 3/4、CP 3/5 and CP 3/6 现场设备工具(FDT)接口规范 第5232部分:通用语言基础结构的通信实现 IEC 61784 CP3/4、CP3/5和CP3/6 |
China National Standards 5, |
English PDF |
GB/T 29618.5231-2018 |
Field device tool (FDT) interface specification—Part 5231: Communication implementation for common language infrastructure—IEC 61784 CP 3/1 and CP 3/2 现场设备工具(FDT)接口规范 第5231部分:通用语言基础结构的通信实现 IEC 61784 CP3/1和CP3/2 |
China National Standards 5, |
English PDF |
GB/T 15879.5-2018 |
Mechanical standardization of semiconductor devices—Part 5: Recommendations applying to tape automated bonding(TAB) of integrated circuits 半导体器件的机械标准化 第5部分:用于集成电路载带自动焊(TAB)的推荐值 |
China National Standards 5, |
English PDF |
GB/T 11313.11-2018 |
Radio-frequency connectors—Part 11:Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5mm (0.374in) with screw coupling with characteristic impedance 50Ω (type 4.1/9.5) 射频连接器 第11部分:外导体内径为9.5mm(0.374in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(4.1/9.5型)分规范 |
China National Standards 5, |
English PDF |
GB/T 36630.5-2018 |
Information security technology—Controllability evaluation index for security of information technology products—Part 5: General purpose computer 信息安全技术 信息技术产品安全可控评价指标 第5部分:通用计算机 |
China National Standards 5, |
English PDF |
GB/T 11313.13-2018 |
Radio-frequency connectors—Part 13:Sectional specification for type 1.6/5.6 and 1.8/5.6 RF coaxial connectors 射频连接器 第13部分:1.6/5.6和1.8/5.6型射频同轴连接器分规范 |
China National Standards 5, |
English PDF |
GB/T 4937.15-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 15: Resistance to soldering temperature for through-hole mounted devices 半导体器件 机械和气候试验方法 第15部分:通孔安装器件的耐焊接热 |
China National Standards 5, |
English PDF |
GB/T 36700.5-2018 |
Chemicals—Guidance on hazard classification to the aquatic environment—Part 5: Bioconcentration 化学品 水生环境危害分类指导 第5部分:生物富集 |
China National Standards 5, |
English PDF |
GB/T 35974.5-2018 |
Plastics and plastic lining pressure vessels—Part 5: Fabrication, inspection and testing for pressure vessels with plastic lining 塑料及其衬里制压力容器 第5部分:塑料衬里制压力容器的制造、检查与检验 |
China National Standards 5, |
English PDF |
GB/T 8243.5-2018 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验 |
China National Standards 5, |
English PDF |
GB/T 16895.34-2018 |
Low-voltage electrical installations—Part 7-753: Requirements for special installations or locations—Heating cables and embedded heating systems 低压电气装置 第7-753 部分:特殊装置或场所的要求 加热电缆及埋入式加热系统 |
China National Standards 5, |
English PDF |
GB/T 13663.5-2018 |
Polyethylene (PE) piping systems for water supply—Part 5: Fitness for purpose of the system 给水用聚乙烯(PE)管道系统 第5部分:系统适用性 |
China National Standards 5, |
English PDF |
GB/T 24218.15-2018 |
Textiles—Test methods for nonwovens—Part 15: Determination of air permeability 纺织品 非织造布试验方法 第15部分:透气性的测定 |
China National Standards 5, |
English PDF |
GB/T 8243.15-2018 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分:复合材料滤清器的振动疲劳试验 |
China National Standards 5, |
English PDF |
GB 35793-2018 |
Ethanol gasoline for motor vehicles E85 车用乙醇汽油E85 |
China National Standards 5, |
English PDF |
GB/T 7717.15-2018 |
Acrylonitrile for industrial use—Part 15:Determination of concent of p-hydroxylanisole 工业用丙烯腈 第15部分:对羟基苯甲醚含量的测定 |
China National Standards 5, |
English PDF |
GB/T 35010.5-2018 |
Semiconductor die products—Part 5:Requirements for concerning electrical simulation 半导体芯片产品 第5部分:电学仿真要求 |
China National Standards 5, |
English PDF |
GB/T 32719.5-2018 |
Dark tea—Part 5:Fu tea 黑茶 第5部分:茯茶 |
China National Standards 5, |
English PDF |
GB/T 33842.5-2018 |
Information technology—Conformance testing methodology for biometric data interchange formats defined in GB/T 26237—Part 5: Face image data 信息技术 GB/T 26237中定义的生物特征数据交换格式的符合性测试方法 第5部分:人脸图像数据 |
China National Standards 5, |
English PDF |
GB/T 32392.5-2018 |
Information technology—Metamodel framework for interoperability (MFI)—Part 5: Metamodel for process model registration 信息技术 互操作性元模型框架(MFI) 第5部分:过程模型注册元模型 |
China National Standards 5, |
English PDF |
GB/T 6346.2501-2018 |
Fixed capacitors for use in electronic equipment—Part 25:Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25-1部分:空白详细规范 表面安装导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards 5, |
English PDF |
GB/T 35853.5-2018 |
List of aerospace equivalent terms—Part 5:Environmental and operating conditions for aircraft equipment 航空航天等效术语表 第5部分:飞行器设备环境和工作条件 |
China National Standards 5, |
English PDF |
GB/T 17737.205-2018 |
Coaxial communication cables—Part 1-205: Environmental test methods—Resistance to solvents and contaminating fluids 同轴通信电缆 第1-205部分:环境试验方法 耐溶剂及污染液试验 |
China National Standards 5, |
English PDF |
GB/T 6346.25-2018 |
Fixed capacitors for use in electronic equipment—Part 25: Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25部分:分规范 表面安装导电高分子固体电解质铝固定电容器 |
China National Standards 5, |
English PDF |
GB/T 17737.105-2018 |
Coaxial communication cables—Part 1-105: Electrical test methods—Test for withstand voltage of cable dielectric 同轴通信电缆 第1-105部分:电气试验方法 电缆介质的耐电压试验 |
China National Standards 5, |
English PDF |
GB/T 17737.115-2018 |
Coaxial communication cables—Part 1-115: Electrical test methods—Test for regularity of impedance (pulse/step function return loss) 同轴通信电缆 第1-115部分:电气试验方法 阻抗均匀性(脉冲/阶跃函数回波损耗)试验 |
China National Standards 5, |
English PDF |
GB/T 11313.15-2018 |
Radio frequency connectors—Part 15: R.F.coaxial connectors with inner diameter of outer conductor 4.13mm(0.163in), characteristic impedance 50 ohms, screw coupling (Type SMA) 射频连接器 第15部分:外导体内径为4.13mm(0.163in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(SMA型) |
China National Standards 5, |
English PDF |
GB/T 17737.325-2018 |
Coaxial communication cables—Part 1-325: Mechanical test methods—Aeolian vibration 同轴通信电缆 第1-325部分:机械试验方法 风激振动试验 |
China National Standards 5, |
English PDF |
GB/T 22159.5-2017 |
Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分:弹性支撑件低频平动动刚度的驱动点测量方法 |
China National Standards 5, |
English PDF |
GB/T 19443-2017 |
Insulators for overhead lines with a nominal voltage above 1500V—Ceramic or glass insulator units for d.c. systems—Definitions,test methods and acceptance criteria 标称电压高于1500V的架空线路用绝缘子 直流系统用瓷或玻璃绝缘子串元件 定义、试验方法及接收准则 |
China National Standards 5, |
English PDF |
GB/T 34937-2017 |
Insulators for overhead lines—Composite suspension and tension insulators for d.c.systems with a nominal voltage greater than 1500 V—Definitions, test methods and acceptance criteria 架空线路绝缘子 标称电压高于1500 V直流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则 |
China National Standards 5, |
English PDF |
GB/T 14048.5-2017 |
Low-voltage switchgear and controlgear—Part 5-1: Control circuit devices and switching element—Electromechanical control circuit devices 低压开关设备和控制设备 第5-1部分:控制电路电器和开关元件 机电式控制电路电器 |
China National Standards 5, |
English PDF |
GB/T 7602.4-2017 |
Quantitative determination of T501 oxidation inhibitor content in transformer oil or turbine oil—Part 4: GC/MS method 变压器油、涡轮机油中T501抗氧化剂含量测定法 第4部分:气质联用法 |
China National Standards 5, |
English PDF |
GB/T 16857.5-2017 |
Geometrical product specifications(GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 5:CMMs using single or multiple stylus contacting probing systems 产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第5部分:使用单探针或多探针接触式探测系统的坐标测量机 |
China National Standards 5, |
English PDF |
GB/T 30269.503-2017 |
Information technology—Sensor networks—Part 503: Identification: Identifier registration procedures for sensor node 信息技术 传感器网络 第503部分:标识:传感节点标识符注册规程 |
China National Standards 5, |
English PDF |
GB/T 29265.502-2017 |
Information technology—Information device intelligent grouping and resource sharing—Part 502: Remote access test 信息技术 信息设备资源共享协同服务 第502部分:远程访问测试 |
China National Standards 5, |
English PDF |
GB/T 29265.205-2017 |
Information technology—Information device intelligent grouping and resource sharing—Part 205: Remote access core protocol 信息技术 信息设备资源共享协同服务 第205部分:远程访问基础协议 |
China National Standards 5, |
English PDF |
GB/T 34520.5-2017 |
Test methods for continuous silicon carbide fiber—Part 5:Tensile properties of single-filament fiber 连续碳化硅纤维测试方法 第5部分:单纤维拉伸性能 |
China National Standards 5, |
English PDF |
GB/T 3780.5-2017 |
Carbon black—Part5:Determination of specific surface area—CTAB test method 炭黑 第5部分:比表面积的测定 CTAB法 |
China National Standards 5, |
English PDF |
GB/T 25802-2017 |
Disperse brilliant blue E-4R(C.I. Disperse blue 56) 分散艳蓝E-4R(C.I.分散蓝56) |
China National Standards 5, |
English PDF |
GB/T 34690.5-2017 |
Graphic technology—Digitalized process control for offset printing—Part 5: Soft proofing 印刷技术 胶印数字化过程控制 第5部分:软打样 |
China National Standards 5, |
English PDF |
GB/T 34923.5-2017 |
Street lights control and management system—Part 5: Technical specification of safety protection 路灯控制管理系统 第5部分:安全防护技术规范 |
China National Standards 5, |
English PDF |
GB/T 34880.2-2017 |
Test conditions for the 5-axis simultaneous machining centers—Part 2: Testing of the accuracy for vertical machine 五轴联动加工中心检验条件 第2部分:立式机床精度检验 |
China National Standards 5, |
English PDF |
GB/T 34880.1-2017 |
Test conditions for the 5-axis simultaneous machining centers—Part 1: Testing of the accuracy for horizontal machine 五轴联动加工中心检验条件 第1部分:卧式机床精度检验 |
China National Standards 5, |
English PDF |
GB/T 34991-2017 |
12.5kHz TDMA channel based professional digital trunking communication system—Technical specifications for physical layer and data link layer of air interface 基于12.5kHz信道的时分多址(TDMA)专用数字集群通信系统 空中接口物理层及数据链路层技术规范 |
China National Standards 5, |
English PDF |
GB/T 34992-2017 |
12.5kHz TDMA channel based professional digital trunking communication system—Technical specifications for call control layer of air interface 基于12.5kHz信道的时分多址(TDMA)专用数字集群通信系统 空中接口呼叫控制层技术规范 |
China National Standards 5, |
English PDF |
GB/T 12690.5-2017 |
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 5: Determination of cobalt,manganese,lead,nickel,copper,zinc,aluminum,chromium,magnesium,cadmium,vanadium and iron contents 稀土金属及其氧化物中非稀土杂质化学分析方法 第5部分:钴、锰、铅、镍、铜、锌、铝、铬、镁、镉、钒、铁量的测定 |
China National Standards 5, |
English PDF |
GB/T 4513.5-2017 |
Monolithic (unshaped) refractory products—Part5: Preparation and treatment of test pieces 不定形耐火材料 第5部分:试样制备和预处理 |
China National Standards 5, |
English PDF |
GB/T 5237.5-2017 |
Wrought aluminium alloy extruded profiles for architecture—Part 5: Paint coating profiles 铝合金建筑型材 第5部分:喷漆型材 |
China National Standards 5, |
English PDF |
GB/T 34560.5-2017 |
Structural steels—Part 5: Technical delivery condition for atmospheric corrosion resisting steels 结构钢 第5部分:耐大气腐蚀结构钢交货技术条件 |
China National Standards 5, |
English PDF |
GB/T 34590.5-2017 |
Road vehicles—Functional safety—Part 5: Product development at the hardware level 道路车辆 功能安全 第5部分:产品开发:硬件层面 |
China National Standards 5, |
English PDF |
GB/T 21412.15-2017 |
Petroleum and natural gas industries—Design and operation of subsea production systems—Part15:Subsea structures and manifolds 石油天然气工业 水下生产系统的设计和操作 第15部分:水下结构物及管汇 |
China National Standards 5, |
English PDF |
GB/T 21412.5-2017 |
Petroleum and natural gas industries—Design and operation of subsea production systems—Part 5: Subsea umbilicals 石油天然气工业 水下生产系统的设计和操作 第5部分:水下脐带缆 |
China National Standards 5, |
English PDF |
GB/T 7727.5-2017 |
General terminology for ships—Part 5:Ship environment 船舶通用术语 第5部分:船舶环境 |
China National Standards 5, |
English PDF |
GB/T 20257.2-2017 |
Cartographic symbols for national fundamental scale maps—Part 2:Specifications for cartographic symbols 1:5 000 & 1:10 000 topographic maps 国家基本比例尺地图图式 第2部分:1:5 000 1:10 000地形图图式 |
China National Standards 5, |
English PDF |
GB/T 20257.1-2017 |
Cartographic symbols for national fundamental scale maps—Part 1:Specifications for cartographic symbols 1︰500 1︰1 000 & 1︰2 000 topographic maps 国家基本比例尺地图图式 第1部分:1:500 1:1 000 1:2 000地形图图式 |
China National Standards 5, |
English PDF |
GB/T 20257.4-2017 |
Cartographic symbols for national fundamental scale maps—Part4:Specifications for cartographic symbols 1︰250 000 1︰500 000﹠ 1︰1 000 000 topographic maps 国家基本比例尺地图图式 第4部分:1:250 000 1:500 000 1:1 000 000地形图图式 |
China National Standards 5, |
English PDF |
Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |