Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 44050.2-2024 |
Hydraulic transmission-Determination of oil noise Characteristics-Part 2: Measurement of oil sound velocity in pipelines {译} 液压传动-油液噪声特性测定-第2部分:管道中油液声速的测量 |
China National Standards Characteristics |
English PDF |
GB/T 44050.1-2024 |
Hydraulic transmission-Determination of oil noise Characteristics-Part 1 Division: General rules- {译} 液压传动-油液噪声特性测定-第1部分:通则- |
China National Standards Characteristics |
English PDF |
GB/T 44052-2024 |
Hydraulic transmission-Filters-Identification of performance Characteristics {译} 液压传动-过滤器-性能特性的标识 |
China National Standards Characteristics |
English PDF |
GB/T 44043-2024 |
Passenger cars - Free steering Characteristics - Steering release open-loop test method {译} 乘用车-自由转向特性-转向释放开环试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 20042.6-2024 |
Proton exchange membrane fuel cells - Part 6 :Test methods for bipolar plate Characteristics {译} 质子交换膜燃料电池-第6部分:双极板特性测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 18910.41-2024 |
Liquid crystal display devices - Part 4: Liquid crystal display modules and screens - Basic ratings and Characteristics {译} 液晶显示器件-第4-1部分:彩色矩阵液晶显示模块-基本额定值和特性 |
China National Standards Characteristics |
English PDF |
GB/T 43733-2024 |
Determination of chlorogenic acids in plants - High Liquid crystal display devices - Part 4-1: Color matrix liquid crystal display modules - Basic ratings and Characteristics {译} 植物中绿原酸类物质的测定-高效液相色谱法 |
China National Standards Characteristics |
English PDF |
GB/T 43501-2023 |
Ships and Offshore Technology - Vibration measurement, evaluation and reporting guidelines for habitability of ships with specific Characteristics {译} 船舶和海上技术 特定特征船舶适居性的振动测量、评价和报告准则 |
China National Standards Characteristics |
English PDF |
GB/T 27612.3-2023 |
Agricultural irrigation equipment sprinkler heads Part 3: Water volume distribution Characteristics and test methods {译} 农业灌溉设备 喷头 第3部分:水量分布特性和试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 40853.2-2023 |
High frequency inductive components Electrical Characteristics and measurement methods Part 2: Rated current of inductors for DC-DC converters {译} 高频感性元件 电特性及其测量方法 第2部分:DC-DC变换器用电感器额定电流 |
China National Standards Characteristics |
English PDF |
GB/T 43248-2023 |
Electric and hybrid vehicles - Radio disturbance Characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz {译} 电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 29711-2023 |
Non-destructive testing of welds Ultrasonic testing Characteristics of internal discontinuities in welds {译} 焊缝无损检测 超声检测 焊缝内部不连续的特征 |
China National Standards Characteristics |
English PDF |
GB/T 43150-2023 |
Design and metrological Characteristics of electronic digital display indicators {译} 电子数显指示表的设计和计量特性 |
China National Standards Characteristics |
English PDF |
GB/T 43149-2023 |
Design and metrological Characteristics of height calipers {译} 高度卡尺的设计和计量特性 |
China National Standards Characteristics |
English PDF |
GB/T 43010-2023 |
Enclosed dry cleaning machines Definition and examination of machine Characteristics {译} 封闭式干洗机 定义和机器特性的检验 |
China National Standards Characteristics |
English PDF |
GB/T 20320-2023 |
Wind power generation systems - Methods for measuring and evaluating electrical Characteristics of wind turbines {译} 风能发电系统 风力发电机组电气特性测量和评估方法 |
China National Standards Characteristics |
English PDF |
GB/T 42534.2-2023 |
Fluid Power Systems and Components Reference Dictionary Specification Part 2: Definitions of Pneumatic Product Classes and Characteristics {译} 流体传动系统及元件 参考词典规范 第2部分:气动产品类与特性的定义 |
China National Standards Characteristics |
English PDF |
GB/T 24479-2023 |
Elevator Characteristics in case of fire {译} 火灾情况下的电梯特性 |
China National Standards Characteristics |
English PDF |
GB/T 42680-2023 |
Test method for atomization Characteristics of liquid fuel based on phase Doppler technique {译} 基于相位多普勒技术的液体燃料雾化特性测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 16674.3-2023 |
Hexagonal flange bolts Small series Class A (wrenching Characteristics according to Class B) {译} 六角法兰面螺栓 小系列 A级(扳拧特性按B级) |
China National Standards Characteristics |
English PDF |
GB/Z 42625-2023 |
Vacuum technology Vacuum gauges Quadrupole mass spectrometer Characteristics for partial pressure measurement {译} 真空技术 真空计 用于分压力测量的四极质谱仪特性 |
China National Standards Characteristics |
English PDF |
GB/T 42756.1-2023 |
Card and identification security devices - Contactless proximity objects - Part 1: Physical Characteristics {译} 卡及身份识别安全设备 无触点接近式对象 第1部分:物理特性 |
China National Standards Characteristics |
English PDF |
GB/T 42403-2023 |
Lasers and laser-related equipment - Measurement methods for laser spectral Characteristics {译} 激光器和激光相关设备 激光光谱特性测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 41636-2022 |
Technical specification for identification and control of quality Characteristics of perishable processed food transportation and storage {译} 易腐加工食品运输储藏品质特征识别与控制技术规范 |
China National Standards Characteristics |
English PDF |
GB/T 7164-2022 |
Characteristics and test methods of radiation detectors for nuclear reactors 用于核反应堆的辐射探测器特性及测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 41342-2022 |
Field test method for power Characteristics of tidal current power generation device {译} 潮流能发电装置功率特性现场测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 42266-2022 |
Flexible porous polymeric materials - Laboratory evaluation of the combustion Characteristics of small specimens in the horizontal direction under a small flame {译} 柔性多孔聚合物材料 小试样在小火焰下水平方向燃烧特性的实验室评估 |
China National Standards Characteristics |
English PDF |
GB/T 33523.606-2022 |
Geometric Product Specification (GPS) Surface Structure Area Method Part 606: Nominal Characteristics of Non-Contact (Zoom) Type Instruments {译} 产品几何技术规范(GPS) 表面结构 区域法 第606部分:非接触(变焦)式仪器的标称特性 |
China National Standards Characteristics |
English PDF |
GB/T 33523.605-2022 |
Product Geometric Specifications (GPS) Surface Structure Area Method Part 605: Nominal Characteristics of Non-Contact (Point AF Probe) Type Instruments {译} 产品几何技术规范(GPS) 表面结构 区域法 第605部分:非接触(点自动对焦探针)式仪器的标称特性 |
China National Standards Characteristics |
English PDF |
GB/T 33523.602-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 602: Nominal Characteristics of Non-Contact (Confocal Chromatic Probe) Type Instruments {译} 产品几何技术规范(GPS) 表面结构 区域法 第602部分:非接触(共聚焦色差探针)式仪器的标称特性 |
China National Standards Characteristics |
English PDF |
GB/T 33523.604-2022 |
Product Geometry Specification (GPS) Surface Structure Area Method Part 604: Nominal Characteristics of Non-Contact (Coherent Scanning Interferometry) Type Instruments {译} 产品几何技术规范(GPS) 表面结构 区域法 第604部分:非接触(相干扫描干涉)式仪器的标称特性 |
China National Standards Characteristics |
English PDF |
GB/T 13477.22-2022 |
Test methods for building sealing materials - Part 22: Determination of curing Characteristics {译} 建筑密封材料试验方法 第22部分:固化特性的测定 |
China National Standards Characteristics |
English PDF |
GB/T 17285-2022 |
Marking of power supply Characteristics of electrical equipment Safety requirements {译} 电气设备电源特性的标记 安全要求 |
China National Standards Characteristics |
English PDF |
GB/Z 42004-2022 |
Consideration of the reference impedance and public power supply network impedance used to determine the disturbance Characteristics of electrical equipment (rated current per phase less than or equal to 75A) {译} 确定电气设备(每相额定电流小于或等于75A)骚扰特性用的参考阻抗和公用供电网络阻抗的考虑 |
China National Standards Characteristics |
English PDF |
GB/T 41801.2-2022 |
Information technology - Biometric identification systems on cards - Part 2: Physical Characteristics {译} 信息技术 卡上生物特征识别系统 第2部分:物理特性 |
China National Standards Characteristics |
English PDF |
GB/T 41995-2022 |
Technical specification for evaluation of operating Characteristics of grid-connected microgrid {译} 并网型微电网运行特性评价技术规范 |
China National Standards Characteristics |
English PDF |
GB/T 9771.7-2022 |
Single-mode optical fibers for telecommunication - Part 7: Characteristics of bend loss insensitive single-mode optical fibers {译} 通信用单模光纤 第7部分:弯曲损耗不敏感单模光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 42064-2022 |
Equipment for general lighting - Flicker Characteristics - Optical scintillation meter test method {译} 普通照明用设备 闪烁特性 光闪烁计测试法 |
China National Standards Characteristics |
English PDF |
GB/T 42020-2022 |
Specifications for measurement of laboratory power supply Characteristics {译} 实验室电源特性的测量规范 |
China National Standards Characteristics |
English PDF |
GB/T 14916-2022 |
Identification Card Physical Characteristics {译} 识别卡 物理特性 |
China National Standards Characteristics |
English PDF |
GB 14023-2022 |
Vehicles, boats and internal combustion engines - Radio disturbance Characteristics - Limits and methods of measurement for protection of off-vehicle receivers {译} 车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 41770-2022 |
Test method of liquid fuel injection Characteristics based on backlight imaging technology {译} 基于背光成像技术的液体燃料喷射特性测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 42049-2022 |
Rolling bearings for aircraft airframes - Characteristics, dimensions, tolerances and static load ratings {译} 飞机机体用滚动轴承 特性、外形尺寸、公差和额定静负荷 |
China National Standards Characteristics |
English PDF |
GB/T 15972.31-2021 |
Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical Characteristics—Tensile strength 光纤试验方法规范 第31部分:机械性能的测量方法和试验程序 抗张强度 |
China National Standards Characteristics |
English PDF |
GB/T 10715-2021 |
Belt drives—V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts—Electrical conductivity of antistatic belts: Characteristics and methods of test 带传动 多楔带、联组V带及包括宽V带、六角带在内的单根V带 抗静电带的导电性:要求和试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 2408-2021 |
Plastics—Determination of burning Characteristics—Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards Characteristics |
English PDF |
GB/T 20081.3-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate Characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分:测试减压阀流量特性的可选方法 |
China National Standards Characteristics |
English PDF |
GB/T 20081.2-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 2: Test methods to determine the main Characteristics to be included in literature from suppliers 气动 减压阀和过滤减压阀 第 2 部分:评定商务文件中应包含的主要特性的试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 20081.1-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 1:Main Characteristics to be included in literature from suppliers and product-marking requirements 气动 减压阀和过滤减压阀 第1部分:商务文件中应包含的主要特性和产品标识要求 |
China National Standards Characteristics |
English PDF |
GB/T 27926.6-2021 |
Financial services—Universal financial industry message scheme—Part 6:Message transport Characteristics 金融服务 金融业通用报文方案 第6部分:报文传输特性 |
China National Standards Characteristics |
English PDF |
GB/T 40310.1-2021 |
Ball splines—Part 1:General Characteristics and requirements 滚动花键副 第1部分:一般特征和要求 |
China National Standards Characteristics |
English PDF |
GB/T 40291-2021 |
Nuclear instrumentation—High-purity germanium crystals for radiation detectors—Measurement methods of basic Characteristics 核仪器仪表 辐射探测器用高纯度锗晶体 基本特性的测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 24817.2-2021 |
Cranes-Control layout and Characteristics-Part 2:Moblie cranes 起重机 控制装置布置形式和特性 第2部分:流动式起重机 |
China National Standards Characteristics |
English PDF |
GB/T 15972.47-2021 |
Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission Characteristics - Macrobending loss 光纤试验方法规范 第47部分:传输特性的测量方法和试验程序 宏弯损耗 |
China National Standards Characteristics |
English PDF |
GB/T 15972.42-2021 |
Specifications for optical fibre test methods—Part 42:Measurement methods and test procedures for transmission Characteristics—Chromatic dispersion 光纤试验方法规范 第42部分:传输特性的测量方法和试验程序 波长色散 |
China National Standards Characteristics |
English PDF |
GB/T 15972.54-2021 |
Specifications for optical fibre test methods—Part 54:Measurement methods and test procedures for environmental Characteristics—Gamma irradiation 光纤试验方法规范 第54部分:环境性能的测量方法和试验程序 伽玛辐照 |
China National Standards Characteristics |
English PDF |
GB/T 15972.45-2021 |
Specifications for optical fibre test methods—Part 45:Measurement methods and test procedures for transmission Characteristics—Mode field diameter 光纤试验方法规范 第45部分:传输特性的测量方法和试验程序 模场直径 |
China National Standards Characteristics |
English PDF |
GB/T 15972.43-2021 |
Specifications for optical fibre test methods—Part 43: Measurement methods and test procedures for transmission Characteristics—Numerical aperture 光纤试验方法规范 第43部分:传输特性的测量方法和试验程序 数值孔径 |
China National Standards Characteristics |
English PDF |
GB/T 15972.41-2021 |
Specifications for optical fibre test methods-Part 41:Measurement methods and test procedures for transmission Characteristics-Bandwidth 光纤试验方法规范 第41部分:传输特性的测量方法和试验程序 带宽 |
China National Standards Characteristics |
English PDF |
GB/T 15972.34-2021 |
Specifications for optical fibre test methods—Part 34:Measurement methods and test procedures for mechanical Characteristics—Fibre curl 光纤试验方法规范 第34部分:机械性能的测量方法和试验程序 光纤翘曲 |
China National Standards Characteristics |
English PDF |
GB/T 15972.30-2021 |
Specifications for optical fibre test methods—Part 30: Measurement methods and test procedures for mechanical Characteristics—Fibre proof test 光纤试验方法规范 第30部分:机械性能的测量方法和试验程序 光纤筛选试验 |
China National Standards Characteristics |
English PDF |
GB/T 39960-2021 |
Straight-sided single-action mechanical power presses -- Characteristicsand dimensions 闭式单动机械压力机 参数和尺寸 |
China National Standards Characteristics |
English PDF |
GB/T 39956.2-2021 |
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 2: Test methods to determine main Characteristics to include in the supplier's literature 气动 电-气压力控制阀 第2部分:评定商务文件中应包含的主要特性的试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 39956.1-2021 |
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 1:Main Characteristics to include in the supplier's literature 气动 电-气压力控制阀 第1部分:商务文件中应包含的主要特性 |
China National Standards Characteristics |
English PDF |
GB/T 39938-2021 |
Electric room heating—Underfloor heating—Performance Characteristics—Definitions, method of testing, sizing and formula symbols 室内电取暖 地暖 性能特征 定义、测试方法、尺寸和公式符号 |
China National Standards Characteristics |
English PDF |
GB/T 39833-2021 |
Test method for coal combustion Characteristics—One-dimensional furnaces method 煤的燃烧特性测定方法 一维炉法 |
China National Standards Characteristics |
English PDF |
GB/T 39825-2021 |
Light conveyor belts—Principal Characteristics and applications 轻型输送带 基本性能及应用 |
China National Standards Characteristics |
English PDF |
GB/T 39741.2-2021 |
Plain bearings—Tolerances—Part 2:Tolerances on geometrical Characteristics and surface roughness for shafts and thrust collars 滑动轴承 公差 第2部分:轴和止推轴肩的几何公差及表面粗糙度 |
China National Standards Characteristics |
English PDF |
GB/T 17743-2021 |
Limits and methods of measurement of radio disturbance Characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰特性的限值和测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 11807-2021 |
Characteristics,design and operational procedures for acoustic monitoring systems of loose parts detection important to safety in nuclear power plants 核电厂安全重要松脱部件声学监测系统的特性、设计和运行规程 |
China National Standards Characteristics |
English PDF |
GB/T 41232.2-2021 |
Nanomanufacturing -- Key control Characteristics -- Nano-enabled electrical energy storage -- Part 2: Density measurement of cathode nanomaterials 纳米制造 关键控制特性 纳米储能 第2部分:纳米正极材料的密度测试 |
China National Standards Characteristics |
English PDF |
GB/T 40911.3-2021 |
Plastics—Poly(methyl methacrylate) sheets—Types,dimensions and Characteristics—Part 3:Continuous cast sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第3部分:连续浇铸板材 |
China National Standards Characteristics |
English PDF |
GB/T 40911.2-2021 |
Plastics—Poly(methyl methacrylate)sheets—Types,dimensions and Characteristics—Part 2:Extruded sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第2部分:挤出板材 |
China National Standards Characteristics |
English PDF |
GB/T 40852.1-2021 |
High frequency inductive components—Non-electrical Characteristics and measuring methods—Part 1:Fixed,surface mounted inductors for use in electronic and telecommunication equipment 高频感性元件 非电特性及其测量方法 第1部分:电子和通信设备用表面安装固定电感器 |
China National Standards Characteristics |
English PDF |
GB/T 40853.1-2021 |
High frequency inductive components—Electrical Characteristics and measuring method—Part 1:Nanohenry range chip inductor 高频感性元件 电特性及其测量方法 第1部分:纳亨级片式电感器 |
China National Standards Characteristics |
English PDF |
GB/T 40681.6-2021 |
Statistical methods in monitoring process capability and performance—Part 6:Process capability statistics for Characteristics following a multivariate normal distribution 生产过程能力和性能监测统计方法 第6部分:多元正态过程能力分析 |
China National Standards Characteristics |
English PDF |
GB/T 40681.5-2021 |
Statistical methods in monitoring process capability and performance—Part 5:Process capability estimates and performance for attributive Characteristics 生产过程能力和性能监测统计方法 第5部分:计数特性的过程能力和性能估计 |
China National Standards Characteristics |
English PDF |
GB/T 40726-2021 |
Rubber-or plastics-coated fabrics—Determination of fogging Characteristics of trim materials in the interior of automobiles 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定 |
China National Standards Characteristics |
English PDF |
GB/T 40742.5-2021 |
Geometrical product specifications (GPS)—Geometrical precisionverification—Part 5:Estimation of uncertainty of measurement for geometrical Characteristics verification 产品几何技术规范(GPS) 几何精度的检测与验证 第5部分:几何特征检测与验证中测量不确定度的评估 |
China National Standards Characteristics |
English PDF |
GB/T 19789-2021 |
Packaging material—Test method for oxygen gas permeability Characteristics of plastic film and sheeting—Coulometric sensor 包装材料 塑料薄膜和薄片氧气透过性试验 库仑计检测法 |
China National Standards Characteristics |
English PDF |
GB/T 40789-2021 |
Gas analysis—Online automated measuring systems for content of carbon monoxide,carbon dioxide and oxygen—Determination of performance Characteristics 气体分析 一氧化碳含量、二氧化碳含量和氧气含量在线自动测量系统 性能特征的确定 |
China National Standards Characteristics |
English PDF |
GB/T 40742.2-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 2:Verification of form Characteristics, orientation characteristics, position characteristics, run-out characteristics and profile characteristics 产品几何技术规范(GPS) 几何精度的检测与验证 第2部分:形状、方向、位置、跳动和轮廓度特征的检测与验证 |
China National Standards Characteristics |
English PDF |
GB/T 28504.3-2021 |
Rare earth doped optical fibre—Part 3:Characteristics of double-cladding erbium-ytterbium co-doped optical fibre 掺稀土光纤 第3部分:双包层铒镱共掺光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 28504.2-2021 |
Rare earth doped optical fibre—Part 2:Characteristics of double-cladding thulium-doped optical fibre 掺稀土光纤 第2部分:双包层掺铥光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 15972.49-2021 |
Specifications for optical fibre test methods—Part 49: Measurement methods and test procedures for transmission Characteristics—Differential mode delay 光纤试验方法规范 第49部分:传输特性的测量方法和试验程序 微分模时延 |
China National Standards Characteristics |
English PDF |
GB/T 15972.32-2021 |
Specifications for optical fibre test methods—Part 32: Measurement methods and test procedures for mechanical Characteristics—Coating strippability 光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性 |
China National Standards Characteristics |
English PDF |
GB/T 38999-2020 |
Health informatics—Health cards—General Characteristics 健康信息学 健康卡 通用特性 |
China National Standards Characteristics |
English PDF |
GB/T 38935-2020 |
On-orbit radiometric Characteristics assessment for optical imaging remote sensor—VIS-SWIR 光学遥感器在轨成像辐射性能评价方法 可见光-短波红外 |
China National Standards Characteristics |
English PDF |
GB/T 38842-2020 |
Categories and test methods of practical superconducting wires—General Characteristics and guidance 实用超导线的分类和检测方法 一般特性和指南 |
China National Standards Characteristics |
English PDF |
GB/T 19204-2020 |
General Characteristics of liquefied natural gas 液化天然气的一般特性 |
China National Standards Characteristics |
English PDF |
GB/T 14513.3-2020 |
Pneumatic fluid power—Determination of flow-rate Characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems 气动 使用可压缩流体元件的流量特性测定 第 3 部分:系统稳态流量特性的计算方法 |
China National Standards Characteristics |
English PDF |
GB/T 9771.6-2020 |
Single-mode optical fibres for telecommunication—Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport 通信用单模光纤 第6部分:宽波长段光传输用非零色散单模光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 9771.5-2020 |
Single-mode optical fibres for telecommunication—Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre 通信用单模光纤 第5部分:非零色散位移单模光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 9771.4-2020 |
Single-mode optical fibres for telecommunication—Part 4: Characteristics of a dispersion shifted single-mode optical fibre 通信用单模光纤 第4部分:色散位移单模光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 9771.3-2020 |
Single-mode optical fibres for telecommunication—Part 3: Characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre 通信用单模光纤 第3部分:波长段扩展的非色散位移单模光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 9771.2-2020 |
Single-mode optical fibres for telecommunication—Part 2: Characteristics of a cut-off wavelength shifted single-mode optical fibre 通信用单模光纤 第2部分:截止波长位移单模光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 9771.1-2020 |
Single-mode optical fibres for telecommunication—Part 1: Characteristics of a dispersion unshifted single-mode optical fibre 通信用单模光纤 第1部分:非色散位移单模光纤特性 |
China National Standards Characteristics |
English PDF |
GB/T 38761-2020 |
Geometrical product specifications (GPS)—Characteristics and conditions—Definitions 产品几何技术规范(GPS) 特征和条件 定义 |
China National Standards Characteristics |
English PDF |
GB/T 24637.4-2020 |
Geometrical product specifications(GPS)—General concepts—Part 4: Geometrical Characteristics for quantifying GPS deviations 产品几何技术规范(GPS) 通用概念 第4部分:几何特征的GPS偏差量化 |
China National Standards Characteristics |
English PDF |
GB/T 39547-2020 |
Design and metrological Characteristics of mechanical dial gauges 机械指示表的设计和计量特性 |
China National Standards Characteristics |
English PDF |
GB/T 39543-2020 |
Design and metrological Characteristics of dial test indicators(lever type) 杠杆指示表的设计和计量特性 |
China National Standards Characteristics |
English PDF |
GB/T 16762-2020 |
Characteristics and specifications of steel wire rope slings for general purposes 一般用途钢丝绳吊索特性和技术条件 |
China National Standards Characteristics |
English PDF |
GB/T 14480.3-2020 |
Non-destructive testing instruments—Equipment for eddy current examination—Part 3: System Characteristics and verification 无损检测仪器 涡流检测设备 第3部分:系统性能和检验 |
China National Standards Characteristics |
English PDF |
GB/T 7758-2020 |
Rubber, vulcanized—Determination of low-temperature Characteristics—Temperature-retraction procedure (TR test) 硫化橡胶 低温性能的测定 温度回缩程序(TR 试验) |
China National Standards Characteristics |
English PDF |
GB/T 24635.1-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 1: Overview and metrological Characteristics 产品几何技术规范(GPS) 坐标测量机(CMM) 确定测量不确定度的技术 第1部分:概要和计量特性 |
China National Standards Characteristics |
English PDF |
GB/T 39697.2-2020 |
Rubber or plastics covered rollers—Specifications—Part 2:Surface Characteristics 橡胶或塑料包覆辊 规范 第2部分:表面特性 |
China National Standards Characteristics |
English PDF |
GB/T 39275-2020 |
Power electronics systems and equipment—Operation conditions and Characteristics of active infeed converter (AIC) applications 电力电子系统和设备 有源馈电变流器(AIC)应用的运行条件和特性 |
China National Standards Characteristics |
English PDF |
GB/T 39273-2020 |
Rolling bearings and spherical plain bearings—Search structure for electronic media—Characteristics and performance criteria identified by property vocabulary 滚动轴承和关节轴承 电子媒体查询结构 用特性词汇标识的特征和性能指标 |
China National Standards Characteristics |
English PDF |
GB/T 24611-2020 |
Rolling bearings—Damage and failures—Terms,Characteristics and causes 滚动轴承 损伤和失效 术语、特征及原因 |
China National Standards Characteristics |
English PDF |
GB/T 39415.2-2020 |
Packaging sacks—Method of specifications for Characteristics—Part 2: Sacks made from thermoplastic flexible film 包装袋 特征性能规范方法 第2部分:热塑性软质薄膜袋 |
China National Standards Characteristics |
English PDF |
GB/T 39415.1-2020 |
Packaging sacks—Method of specifications for Characteristics—Part 1: Paper sacks 包装袋 特征性能规范方法 第1部分:纸袋 |
China National Standards Characteristics |
English PDF |
GB/T 3836.12-2019 |
Explosive atmospheres—Part 12:Material Characteristics for combustible dusts—Test methods 爆炸性环境 第12部分:可燃性粉尘物质特性 试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 7253-2019 |
Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.systems—Characteristics of insulator units of the cap and pin type 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性 |
China National Standards Characteristics |
English PDF |
GB/T 7253-2019 |
Insulators for overhead lines with a nominal voltage above 1 000V—Ceramic or glass insulator units for a.c.systems—Characteristics of insulator units of the cap and pin type 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性 |
China National Standards Characteristics |
English PDF |
GB 4824-2019 |
Industrial,scientific and medical equipment—Radio-frequency disturbance Characteristics—Limits and methods of measurement 工业、科学和医疗设备 射频骚扰特性 限值和测量方法 |
China National Standards Characteristics |
English PDF |
GB/Z 37627.3-2019 |
Radio interference Characteristics of overhead power lines and high-voltage equipment—Part 3:Code of practice for minimizing the generation of radio noise 架空电力线路和高压设备的无线电干扰特性 第3部分:减少无线电噪声至最小程度的实施规程 |
China National Standards Characteristics |
English PDF |
GB/T 18497.2-2019 |
Characteristics of electric infrared emitters for industrial heating—Part 2: Mediumwave and longwave electric infrared emitters 工业加热用电红外发射器的特性 第2部分:中长波电红外发射器 |
China National Standards Characteristics |
English PDF |
GB/T 18497.1-2019 |
Characteristics of electric infrared emitters for industrial heating—Part 1: Shortwave electric infrared emitters 工业加热用电红外发射器的特性 第1部分:短波电红外发射器 |
China National Standards Characteristics |
English PDF |
GB 23255-2019 |
Photometric Characteristics of daytime running lamps for power driven vehicles 机动车昼间行驶灯配光性能 |
China National Standards Characteristics |
English PDF |
GB 5920-2019 |
Photometric Characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers 汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能 |
China National Standards Characteristics |
English PDF |
GB/T 37664.1-2019 |
Nanomanufacturing—Key control Characteristics—Luminescent nanomaterials—Part 1:Quantum efficiency 纳米制造 关键控制特性 发光纳米材料 第1部分:量子效率 |
China National Standards Characteristics |
English PDF |
GB/T 37370-2019 |
Names and colorimetric Characteristics of Chinese common colors 中国常见色色名和色度特性 |
China National Standards Characteristics |
English PDF |
GB/T 21561.4-2018 |
Railway applications—Rolling stock pantograph Characteristics and tests—Part 4: Interface between pantograph and rolling stock for metros and light rail vehicles 轨道交通-机车车辆受电弓特性和试验-第4部分:受电弓与地铁、轻轨车辆接口 |
China National Standards Characteristics |
English PDF |
GB/T 36979-2018 |
Measuring method of spatial distribution of color Characteristics for LED products LED产品空间颜色分布测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 21561.2-2018 |
Railway applications—Rolling stock pantographs Characteristics and tests—Part 2:Pantographs for metros and light rail vehicles 轨道交通-机车车辆受电弓特性和试验-第2部分:地铁和轻轨车辆受电弓 |
China National Standards Characteristics |
English PDF |
GB/T 21561.1-2018 |
Railway applications—Rolling stock pantographs Characteristics and tests—Part 1:Pantographs for mainline vehicles 轨道交通-机车车辆受电弓特性和试验-第1部分:干线机车车辆受电弓 |
China National Standards Characteristics |
English PDF |
GB/T 25122.1-2018 |
Railway applications—Power converters installed on board rolling stock—Part 1: Characteristics and test methods 轨道交通-机车车辆用电力变流器-第1部分:特性和试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 2408-2008/XG1-2018 |
Plastics - Determination of burning Characteristics - Horizontal and vertical test 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单 |
China National Standards Characteristics |
English PDF |
GB/T 36279-2018 |
Methods for testing self-damping Characteristics of overhead conductors 架空导线自阻尼特性测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 35022-2018 |
Additive manufacturing—Main Characteristics and corresponding test methods—Parts and powder materials 增材制造 主要特性和测试方法 零件和粉末原材料 |
China National Standards Characteristics |
English PDF |
GB/T 36297-2018 |
Field test Characteristics of optical remote sensing payload 光学遥感载荷性能外场测试评价指标 |
China National Standards Characteristics |
English PDF |
GB/T 18655-2018 |
Vehicles, boats and internal combustion engines—Radio disturbance Characteristics—Limits and methods of measurement for the protection of on-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 36532-2018 |
Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure Characteristics 纤维增强塑料 热固性模塑料和预浸料 固化特性测定 |
China National Standards Characteristics |
English PDF |
GB/T 13611-2018 |
Classification and basic Characteristics of city gas 城镇燃气分类和基本特性 |
China National Standards Characteristics |
English PDF |
GB/T 36043-2018 |
Specification of large-scale steam turbine-generator shafting dynamic Characteristics 大型汽轮发电机组轴系动力特性技术规范 |
China National Standards Characteristics |
English PDF |
GB/T 17737.310-2018 |
Coaxial communication cables—Part 1-310: Mechanical test methods—Test for torsion Characteristics of copper-clad metals 同轴通信电缆 第1-310部分:机械试验方法 铜包金属的扭转特性试验 |
China National Standards Characteristics |
English PDF |
GB/T 35852-2018 |
Dimensions and Characteristics of conductors for general purpose aircraft electrical cables and aerospace applications 飞机通用电缆和航空航天应用的导体尺寸和特性 |
China National Standards Characteristics |
English PDF |
GB/T 34879-2017 |
Geometrical product specifications (GPS)—Metrological Characteristics and guide to uncertainty of measurement for optical confocal microscopes 产品几何技术规范(GPS) 光学共焦显微镜计量特性及测量不确定度评定导则 |
China National Standards Characteristics |
English PDF |
GB/T 25102.8-2017 |
Electroacoustics—Hearing aids—Part 8: Methods of measurement of performance Characteristics of hearing aids under simulated in situ working conditions 电声学 助听器 第8部分:模拟实际工作条件下的助听器性能测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 25102.6-2017 |
Electroacoustic—Hearing aids—Part 6: Characteristics of electrical input circuits for hearing aids 电声学 助听器 第6部分:助听器输入电路的特性 |
China National Standards Characteristics |
English PDF |
GB/T 6494-2017 |
Measurement method for electrical Characteristics of aerospace solar cells 航天用太阳电池电性能测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 34615-2017 |
Determination of combustion Characteristics of CMSW for coprocessing in cement kiln 水泥窑协同处置的生活垃圾预处理可燃物燃烧特性检测方法 |
China National Standards Characteristics |
English PDF |
GB/T 3685-2017 |
Conveyor belts—Laboratory scale flammability Characteristics—Test method 输送带 实验室规模的燃烧特性 试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 25102.7-2017 |
Electroacoustics—Hearing aids—Part 7: Measurement of the performance Characteristics of hearing aids for production, supply and delivery quality assurance purposes 电声学 助听器 第7部分:助听器生产、供应和交货时质量保证的性能特性测量 |
China National Standards Characteristics |
English PDF |
GB/T 7343-2017 |
Methods of measurement of the suppression Characteristics of passive EMC filtering devices 无源EMC滤波器件抑制特性的测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 15972.44-2017 |
Specifications for optical fibre test methods—Part 44: Measurement methods and test procedures for transmission and optical Characteristics—Cut-off wavelength 光纤试验方法规范 第44部分:传输特性和光学特性的测量方法和试验程序 截止波长 |
China National Standards Characteristics |
English PDF |
GB/T 33856-2017 |
Methods of measurement for main Characteristics of equipments of sound systems for emergency purposes 应急声系统设备主要性能测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 33779.1-2017 |
Guidance for special Characteristics of optical fibre—Part 1: Attenuation uniformity 光纤特性测试导则 第1部分:衰减均匀性 |
China National Standards Characteristics |
English PDF |
GB/T 33626.1-2017 |
Pneumatic lubricators—Part 1:Main Characteristics to be included in supplier’s literature and product-marking requirements 气动油雾器 第1部分:商务文件中应包含的主要特性和产品标识要求 |
China National Standards Characteristics |
English PDF |
GB/T 33626.2-2017 |
Pneumatic lutricators—Part 2:Test methods to determine the main Characteristics to be included in supplier’s literature 气动油雾器 第2部分:评定商务文件中包含的主要特性的试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 33575-2017 |
Freight containers—Electronic seals—Environmental Characteristics 集装箱 电子箱封 环境特性 |
China National Standards Characteristics |
English PDF |
GB/T 33523.601-2017 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 601: Nominal Characteristics of contact (stylus) instruments 产品几何技术规范(GPS) 表面结构 区域法 第601部分:接触(触针)式仪器的标称特性 |
China National Standards Characteristics |
English PDF |
GB/T 33525-2017 |
Conveyor belts—Characteristics of covers—Classification 输送带 覆盖层性能 类别 |
China National Standards Characteristics |
English PDF |
GB/T 3836.11-2017 |
Explosive atmospheres—Part 11: Material Characteristics for gas and vapourclassification—Test methods and data 爆炸性环境 第11部分:气体和蒸气物质特性分类 试验方法和数据 |
China National Standards Characteristics |
English PDF |
GB/T 11026.3-2017 |
Electrical insulating materials—Thermal endurance properties —Part 3: Intrucations for calculating thermal endurance Characteristics 电气绝缘材料 耐热性 第3部分:计算耐热特征参数的规程 |
China National Standards Characteristics |
English PDF |
GB/T 14513.1-2017 |
Pneumatic fluid power—Determination of flow-rate Characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow 气动 使用可压缩流体元件的流量特性测定 第1部分:稳态流动的一般规则和试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 18015.7-2017 |
Multicore and symmetrical pair/quad cables for digital communications—Part 7: Symmetrical pair/quad cables with transmission Characteristics up to 1 200MHz—Sectional specification for digital and analog communication cables 数字通信用对绞或星绞多芯对称电缆 第7部分:具有1200MHz及以下传输特性的对绞或星绞对称电缆 数字及模拟通信电缆分规范 |
China National Standards Characteristics |
English PDF |
GB/T 18015.8-2017 |
Multicore and symmetrical pair/quad cables for digital communications—Part 8: Symmetrical pair/quad cables with transmission Characteristics up to 1200MHz-Work area wiring sectional specification 数字通信用对绞或星绞多芯对称电缆 第8部分:具有1200MHz及以下传输特性的对绞或星绞对称电缆 工作区布线电缆分规范 |
China National Standards Characteristics |
English PDF |
GB/T 17743-2017 |
Limits and methods of measurement of radio disturbance Characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰特性的限值和测量方法 |
China National Standards Characteristics |
English PDF |
GB 4660-2016 |
Photometric Characteristics of power-driven vehicle front fog lamps 机动车用前雾灯配光性能 |
China National Standards Characteristics |
English PDF |
GB/T 33304-2016 |
Testing method of combustion Characteristics of coal—Thermogravimetric analysis 煤炭燃烧特性试验方法 热重分析法 |
China National Standards Characteristics |
English PDF |
GB/T 11026.9-2016 |
Electrical insulating materials—Thermal endurance properties—Part 9: Instructions for calculating thermal endurance Characteristics using simplified procedures 电气绝缘材料 耐热性 第9部分:利用简化程序计算耐热性导则 |
China National Standards Characteristics |
English PDF |
GB/T 15789-2016 |
Geotextiles and geotextile-related products—Determination of water permeability Characteristics normal to the plane,without load 土工布及其有关产品 无负荷时垂直渗透特性的测定 |
China National Standards Characteristics |
English PDF |
GB/T 22181.24-2016 |
Plasma display panels—Part 2-4: Methods for measuring the Characteristics of devices for digital television sets 等离子体显示器件 第2-4部分:数字电视机用器件特性测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 24817.3-2016 |
Cranes—Control layout and Characteristics—Part 3: Tower cranes 起重机 控制装置布置形式和特性 第3部分:塔式起重机 |
China National Standards Characteristics |
English PDF |
GB/T 24817.1-2016 |
Cranes—Control layout and Characteristics—Part 1: General principles 起重机 控制装置布置形式和特性 第1部分:总则 |
China National Standards Characteristics |
English PDF |
GB/T 17215.9321-2016 |
Electricity metering equipment—Dependability—Part 321: Durability testing of the stability of metrological Characteristics by applying elevated temperature 电测量设备 可信性 第321部分:耐久性-高温下的计量特性稳定性试验 |
China National Standards Characteristics |
English PDF |
GB 15213-2016 |
Medical electron accelerators—Functional performance Characteristics and test methods 医用电子加速器 性能和试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 32774-2016 |
X-ray inspection method for internal structure Characteristics of wood door 木质门内部结构特征X射线检测方法 |
China National Standards Characteristics |
English PDF |
GB/T 21561.3-2016 |
Railway applications—Rolling stock pantographs Characteristics and tests—Part 3: Interface between pantograph and rolling stock for mainline vehicles 轨道交通 机车车辆受电弓特性和试验 第3部分:受电弓与干线机车车辆的接口 |
China National Standards Characteristics |
English PDF |
GB/T 15972.48-2016 |
Specifications for optical fibre test methods—Part 48: Measurement methods and test procedures for transmission and optical Characteristics—Polarization mode dispersion 光纤试验方法规范 第48部分:传输特性和光学特性的测量方法和试验程序 偏振模色散 |
China National Standards Characteristics |
English PDF |
GB/T 1000-2016 |
Dimensions and Characteristics of pin insulators of ceramic for high-voltage overhead lines 高压线路针式瓷绝缘子尺寸与特性 |
China National Standards Characteristics |
English PDF |
GB/T 32522-2016 |
Acoustics—Electroacoustic Characteristics and measurements of spherically focusing ultrasonic transducers 声学 压电球面聚焦超声换能器的电声特性及其测量 |
China National Standards Characteristics |
English PDF |
GB/T 25753.4-2015 |
Vacuum technology—Roots vacuum pump— Measurement of performance Characteristics—Part 4: Measurement of noise 真空技术 罗茨真空泵性能测量方法 第4部分:噪声的测量 |
China National Standards Characteristics |
English PDF |
GB/T 32265.1-2015 |
Ease of operation of everyday products—Part 1:Design requirements for context of use and user Characteristics 日用产品的易操作性 第1部分:针对使用情境和用户特征的设计要求 |
China National Standards Characteristics |
English PDF |
GB/T 17213.10-2015 |
Industrial-process control valves—Part 2-4: Flow capacity—Inherent flow Characteristics and rangeability 工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比 |
China National Standards Characteristics |
English PDF |
GB/T 14480.2-2015 |
Non-destructive testing instruments—Equipment for eddy current examination—Part 2:Probe Characteristics and verification 无损检测仪器 涡流检测设备 第2部分:探头性能和检验 |
China National Standards Characteristics |
English PDF |
GB/T 14480.1-2015 |
Non-destructive testing instruments—Equipment for eddy current examination—Part 1:Instrument Characteristics and verification 无损检测仪器 涡流检测设备 第1部分:仪器性能和检验 |
China National Standards Characteristics |
English PDF |
GB/T 7166-2015 |
Characteristics and test methods for in-core and primary coolant circuit temperature sensors in nuclear power plants 核电厂反应堆堆芯和主冷却剂回路内温度计的特性和试验方法 |
China National Standards Characteristics |
English PDF |
GB 18408-2015 |
photometric Characteristics of devices for the illumination of rear registration plates of motor vehicles and their trailers 汽车及挂车后牌照板照明装置配光性能 |
China National Standards Characteristics |
English PDF |
GB/T 32072-2015 |
Belt drives—Electrical conductivity of antistatic synchronous belts—Characteristics and test method 带传动 抗静电同步带的导电性 要求和试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 31999-2015 |
Technical specification of evaluation of integration Characteristics for connecting photovoltaic power system to distribution network 光伏发电系统接入配电网特性评价技术规范 |
China National Standards Characteristics |
English PDF |
GB/T 11313.16-2015 |
Radio-frequency connectors—Part 16:Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristics impedance 50 Ω (75 Ω) (type N) 射频连接器 第16部分:外导体内径为7mm(0.276in)、特性阻抗为50Ω(75Ω)、螺纹连接的射频同轴连接器(N型)分规范 |
China National Standards Characteristics |
English PDF |
GB/T 19125-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric Characteristics of front and rear position lamps,stop lamps 三轮汽车和低速货车 前位灯、后位灯和制动灯配光性能 |
China National Standards Characteristics |
English PDF |
GB/T 19123-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric Characteristics of turn signal lamps 三轮汽车和低速货车 转向信号灯配光性能 |
China National Standards Characteristics |
English PDF |
GB/T 19135-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric Characteristics of reversing lamps 三轮汽车和低速货车 倒车灯配光性能 |
China National Standards Characteristics |
English PDF |
GB/T 31430-2015 |
Names and colorimetric Characteristics of traditional colors in China 中国传统色色名及色度特性 |
China National Standards Characteristics |
English PDF |
GB/T 17618-2015 |
Information technology equipment—Immunity Characteristics—Limits and methods of measurement 信息技术设备 抗扰度 限值和测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 30697-2014 |
Test methods of Characteristics for spaceborne multispectral camera with wide field of view 星载大视场多光谱相机性能测试方法 |
China National Standards Characteristics |
English PDF |
GB/T 30661.2-2014 |
Wheelchair seating―Part 2: Determination of physical and mechanical Characteristics of devices intended to manage tissue integrity―Seat cushions 轮椅车座椅 第2部分:维持组织完整性装置的物理和机械特性测定 座垫 |
China National Standards Characteristics |
English PDF |
GB/T 9869-2014 |
Rubber―Measurement of vulcanization Characteristics with the oscillating disc curemeter 橡胶胶料 硫化特性的测定 圆盘振荡硫化仪法 |
China National Standards Characteristics |
English PDF |
GB/T 21421.2-2014 |
Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V― Part 2:Dimensions and Characteristics 标称电压高于1 000V 的架空线路用复合绝缘子串元件 第2部分:尺寸与特性 |
China National Standards Characteristics |
English PDF |
GB/T 30823-2014 |
Nickel-alloy probe test method for determination cooling Characteristics of industrial quenching oil 测定工业淬火油冷却性能的镍合金探头试验方法 |
China National Standards Characteristics |
English PDF |
GB/T 30706-2014 |
Measurment method and evaluating of the antibacterial Characteristics of photocatalysis materials under visible light irridation 可见光照射下光催化抗菌材料及制品抗菌性能测试方法及评价 |
China National Standards Characteristics |
English PDF |
GB/T 30511-2014 |
Photometric Characteristics ofcornering lamps for motor vehicle 汽车用角灯配光性能 |
China National Standards Characteristics |
English PDF |
GB 4824-2013 |
Industrial, scientific and medical equipment—Radio-frequency disturbance Characteristics-Limits and methods of measurement 工业、科学和医疗(ISM)射频设备 骚扰特性 限值和测量方法 |
China National Standards Characteristics |
English PDF |
GB/T 30203-2013 |
Characteristics of aircraft electrical system 飞机电气系统特性 |
China National Standards Characteristics |
English PDF |
GB/T 20320-2013 |
Measurement and assessment of power quality Characteristics of wind turbines generator systems 风力发电机组 电能质量测量和评估方法 |
China National Standards Characteristics |
English PDF |
GB/T 18989-2013 |
Radionuclide imaging device—Characteristics and test conditions—Gamma cameras 放射性核素成像设备 性能和试验规则 伽玛照相机 |
China National Standards Characteristics |
English PDF |
GB/T 18988.3-2013 |
Radionuclide imaging device―Characteristics and test conditions―Part 3:Gamma camera based-wholebody imaging systems 放射性核素成像设备 性能和试验规则 第3部分:伽玛照相机全身成像系统 |
China National Standards Characteristics |
English PDF |
Find out:496Items | To Page of: First -Previous-Next -Last | 1 2 3 |