China National Standards

China Determination plastic properties GB Standards List

  •  China "Determination plastic properties" GB Standards List:
    • Standard  Code Standard Title Standard Class Order
    GB/T 43117-2023 Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions {译}
    玻璃纤维增强热固性塑料（GRP）管 湿态或干态条件下环蠕变性能的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 18950-2023 Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. {译}
    橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 33061.7-2023 Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method {译}
    塑料 动态力学性能的测定 第7部分: 非共振扭转振动法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 33061.6-2023 Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method {译}
    塑料 动态力学性能的测定 第6部分：非共振剪切振动法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 33061.5-2023 Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method {译}
    塑料 动态力学性能的测定 第5部分：非共振弯曲振动法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 33061.4-2023 Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method {译}
    塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1040.2-2022 Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics {译}
    塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 11546.2-2022 Plastics - Determination of creep properties - Part 2: Three-point bending creep {译}
    塑料 蠕变性能的测定 第2部分:三点弯曲蠕变    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 33061.11-2022 Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature {译}
    塑料 动态力学性能的测定 第11部分: 玻璃化转变温度    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 41878-2022 Plastics - Determination of scratch properties {译}
    塑料 划痕性能的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 41762.2-2022 Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests {译}
    纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分：弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 41758.2-2022 Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties {译}
    塑料 聚酮（PK）模塑和挤出材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 40426.3-2021 Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material
    塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 40426.2-2021 Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material
    塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 15596-2021 Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
    塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1845.2-2021 Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
    塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 39827.2-2021 Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties
    塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 22271.2-2021 Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
    塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 8813-2020 Rigid cellular plastics—Determination of compression properties
    硬质泡沫塑料 压缩性能的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 39714.2-2020 Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties
    塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 39690.2-2020 Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties
    塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 36805.2-2020 Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method
    塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 38273.2-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties
    塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 37199.2-2018 Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties
    塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 37194.2-2018 Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties
    塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1040.1-2018 Plastics—Determination of tensile properties—Part 1:General principles
    塑料-拉伸性能的测定-第1部分：总则    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 36374.2-2018 Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties
    塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 36805.1-2018 Plastics—Determination of tensile properties at high strain rates—Part 1:Equation fitting method
    塑料 高应变速率下的拉伸性能测定 第1部分：方程拟合法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1043.2-2018 Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test
    塑料 简支梁冲击性能的测定 第2部分：仪器化冲击试验    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 34691.2-2017 Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
    塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 35513.2-2017 Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
    塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 33061.1-2016 Plastics—Determination of dynamic mechanical properties—Part 1: General principles
    塑料 动态力学性能的测定 第1部分：通则    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 33061.10-2016 Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
    塑料 动态力学性能的测定 第10部分：使用平行平板振荡流变仪测定复数剪切黏度    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 32363.2-2015 Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties
    塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 30924.2-2014 Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
    塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 3403.2-2013 Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties
    塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 13454.2-2013 Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: Preparation of test specimens and determination of properties
    塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 15597.2-2010 Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 25213-2010 Determination of plastic properties of coal - Constant-torque gieseler plastometer method
    煤的塑性测定 恒力矩吉氏塑性仪法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 3402.2-2010 Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties
    塑料 氯乙烯均聚和共聚树脂 第2部分：试样制备及性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 12010.2-2010 Plastic - Poly(vinyl alcohol)(PVAL)materials - Part 2: Determination of properties
    塑料 聚乙烯醇材料（PVAL） 第2部分：性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 24148.2-2009 Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties
    塑料 不饱和聚酯树脂（UP-R） 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 15596-2009 Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass，natural weathering or laboratory light sources
    塑料在玻璃下日光、自然气候或实验室光源暴露后颜色和性能变化的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 7757-2009 Rubber，vulcanized or thermoplastic - Determination of compression stress-strain properties
    硫化橡胶或热塑性橡胶 压缩应力应变性能的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 528-2009 Rubber，vulcanized or thermoplastic - Determination of tensile stress-strain properties
    硫化橡胶或热塑性橡胶 拉伸应力应变性能的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 14208.4-2009 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength
    纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第4部分：表观层间剪切强度的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 14208.3-2009 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 3: Determination of compressive strength
    纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分：压缩强度的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 14208.2-2009 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 2: Determination of flexural strength
    纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第2部分：弯曲强度的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 14208.1-2009 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 1: General considerations and preparation of rods
    纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第1部分：通则和棒的制备    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 12001.2-2008 Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 2: Preparation of test specimens and determination of properties
    塑料 未增塑聚氯乙烯模塑和挤出材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 9341-2008 Plastics - Determination of flexural properties
    塑料 弯曲性能的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 22271.2-2008 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 聚甲醛（POM）模塑和挤塑材料 第2部分：试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1404.2-2008 Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties
    塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1043.1-2008 Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test
    塑料 简支梁冲击性能的测定 第1部分：非仪器化冲击试验    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1040.5-2008 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
    塑料 拉伸性能的测定 第5部分：单向纤维增强复合材料的试验条件    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 5258-2008 Fiber-reinforced plastic composites - Determination of compressive properties in the in-plane direction
    纤维增强塑料面内压缩性能试验方法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 9870.2-2008 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2:Torsion pendulum methods at low frequencies
    硫化橡胶或热塑性橡胶动态性能的测定 第2部分：低频扭摆法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 21461.2-2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 21460.2-2008 Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
    塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 8813-2008 Rigid cellular plastics - Determination of compression properties
    硬质泡沫塑料压缩性能的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 21332-2008 Rigid cellular plastics - Determination of water vapour transmission properties
    硬质泡沫塑料 水蒸气透过性能的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 8812.2-2007 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
    硬质泡沫塑料 弯曲性能的测定 第2部分: 弯曲强度和表观弯曲弹性模量的测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 8812.1-2007 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
    硬质泡沫塑料 弯曲性能的测定 第1部分：基本弯曲试验    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 9870.1-2006 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guidance
    硫化橡胶或热塑性橡胶动态性能的测定 第1部分：通则    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1040.4-2006 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
    塑料 拉伸性能的测定 第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1040.3-2006 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets
    塑料 拉伸性能的测定 第3部分：薄膜和薄片的试验条件    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
    塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1040.1-2006 Plastics - Determination of tensile properties - Part 1: General principles
    塑料 拉伸性能的测定 第1部分：总则    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 20417.2-2006 Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
    塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1845.2-2006 Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
    塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 5352-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination for external loading properties by parallel-plate loading
    纤维增强热固性塑料管平行板 外载性能试验方法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 5350-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination for longitudinal compressive properties
    纤维增强热固性塑料管轴向压缩性能 试验方法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 5349-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination of longitudinal tensile properties
    纤维增强热固性塑料管轴向拉伸 性能试验方法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1451-2005 Fiber-reinforced plastics composites---Determination of Charpy impact properties
    纤维增强塑料简支梁式冲击韧性 试验方法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1449-2005 Fibre-reinforced plastic composites-Determination of flexural properties
    纤维增强塑料弯曲性能试验方法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1448-2005 Fiber-reinforced plastics composites-Determination of compressive properties
    纤维增强塑料压缩性能试验方法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1447-2005 Fiber-reinforced plastics composites---Determination of tensile properties
    纤维增强塑料拉伸性能试验方法    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 1446-2005 Fiber-reinforced plastics composites-The generals for determination of properties
    纤维增强塑料性能试验方法总则    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 8804.3-2003 Thermoplastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes
    热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 8804.2-2003 Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U)，chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI)
    热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 8804.1-2003 Thermoplastic pipes--Determination of tensile properties--Part 1: General test method
    热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 6594.2-2003 Plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties
    塑料 聚苯乙烯(PS)模塑和挤出材料 第2部分: 试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 2546.2-2003 Plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties
    塑料 聚丙烯(PP)模塑和挤出材料 第2部分: 试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF
    GB/T 18964.2-2003 Plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties
    塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第2部分: 试样制备和性能测定    		 China National Standards
    Determination plastic properties
    English PDF

    Find out:84Items   |  To Page of: First -Previous-Next -Last  | 1

    　

    +86-755-25831330        [email protected] 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.gbstandards.org
    China National Standards