China Plastics Determination temperature GB Standards List

China "Plastics Determination temperature" GB Standards List:

Standard Code	Standard Title	Standard Class	Order
GB/T 42919.6-2023	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology {译} 塑料导热系数和热扩散系数的测定第6部分：基于温度调制技术的比较法	China National Standards Plastics Determination temperature	English PDF
GB/T 42919.3-2023	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method {译} 塑料导热系数和热扩散系数的测定第3部分：温度波分析法	China National Standards Plastics Determination temperature	English PDF
GB/T 2406.3-2022	Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料用氧指数法测定燃烧行为第3部分：高温试验	China National Standards Plastics Determination temperature	English PDF
GB/T 19466.5-2022	Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion {译} 塑料差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 33061.11-2022	Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature {译} 塑料动态力学性能的测定第11部分: 玻璃化转变温度	China National Standards Plastics Determination temperature	English PDF
GB/T 41792-2022	Plastics - Films and sheets - Determination of cold cracking temperature {译} 塑料制品薄膜和薄片冷裂温度的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 1634.2-2019	Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite 塑料负荷变形温度的测定第2部分：塑料和硬橡胶	China National Standards Plastics Determination temperature	English PDF
GB/T 1634.1-2019	Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料负荷变形温度的测定第1部分:通用试验方法	China National Standards Plastics Determination temperature	English PDF
GB/T 36214.4-2018	Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method 塑料体积排除色谱法测定聚合物的平均分子量和分子量分布第4部分：高温法	China National Standards Plastics Determination temperature	English PDF
GB/T 36214.3-2018	Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料体积排除色谱法测定聚合物的平均分子量和分子量分布第3部分：低温法	China National Standards Plastics Determination temperature	English PDF
GB/T 36800.2-2018	Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature 塑料热机械分析法(TMA) 第2部分：线性热膨胀系数和玻璃化转变温度的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 3682.2-2018	Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法	China National Standards Plastics Determination temperature	English PDF
GB/T 32681-2016	Plastics—Phenolic resin —Determination of heats and temperatures of reaction by differential scanning calorimetry 塑料酚醛树脂用差示扫描量热计法测定反应热和反应温度	China National Standards Plastics Determination temperature	English PDF
GB/T 32675-2016	Plastics—Phenloic resins—Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions 塑料酚醛树脂液体甲阶酚醛树脂在酸性条件下固化时假绝热温升的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 2406.2-2009	Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test 塑料用氧指数法测定燃烧行为第2部分：室温试验	China National Standards Plastics Determination temperature	English PDF
GB/T 19466.6-2009	Plastics - Differential scanning calorimetry（DSC）- Part 6: Determination of oxidation induction time（isothermal OIT）and oxidation induction temperature（dynamic OIT）塑料差示扫描量热法（DSC）第6部分：氧化诱导时间(等温OIT)和氧化诱导温度（动态OIT）的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 5470-2008	Plastics - Determination of the brittleness temperature by impact 塑料冲击法脆化温度的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 16582-2008	Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods 塑料　用毛细管法和偏光显微镜法测定部分结晶聚合物熔融行为（熔融温度或熔融范围）	China National Standards Plastics Determination temperature	English PDF
GB/T 9343-2008	Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature 塑料燃烧性能试验方法闪燃温度和自燃温度的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 4610-2008	Plastics - Determination of ignition temperature using a hot-air furnace 塑料热空气炉法点着温度的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 9267-2008	Emulsions for coatings and polymer dispersions for coatings and plastics - Determination of white point temperature and minimum film-forming temperature 涂料用乳液和涂料、塑料用聚合物分散体白点温度和最低成膜温度的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 20673-2006	Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures 硬质泡沫塑料低于环境温度的线膨胀系数的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 20672-2006	Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions 硬质泡沫塑料在规定负荷和温度条件下压缩蠕变的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 19466.3-2004	Plastics--Differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization 塑料差示扫描量热法(DSC) 第3部分:熔融和结晶温度及热焓的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 19466.2-2004	Plastics--Differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature 塑料差示扫描量热法(DSC) 第2部分:玻璃化转变温度的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 1634.3-2004	Plastics--Determination of temperature of deflection under load--Part 3:High-strength thermosetting laminates 塑料负荷变形温度的测定第3部分:高强度热固性层压材料	China National Standards Plastics Determination temperature	English PDF
GB/T 1634.2-2004	Plastics--Determination of temperature of deflection under load--Part 2:Plastics，ebonite and long-fibre-reinforced composites 塑料负荷变形温度的测定第2部分:塑料、硬橡胶和长纤维增强复合材料	China National Standards Plastics Determination temperature	English PDF
GB/T 1634.1-2004	Plastics--Determination of temperature of deflection under load--Part 1:General test method 塑料负荷变形温度的测定第1部分:通用试验方法	China National Standards Plastics Determination temperature	English PDF
GB/T 3400-2002	Plastics--Homopolymer and copolymer resins of vinyl chloeride for general use--Determination of plasticizer absorption at room temperature 塑料通用型氯乙烯均聚和共聚树脂室温下增塑剂吸收量的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 7142-2002	Determination of time-temperature limits for plastics after prolonged exposure to heat 塑料长期热暴露后时间-温度极限的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 8802-2001	Thermoplastics pipes and fitting--Determination of vicat softening temperature 热塑性塑料管材、管件维卡软化温度的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 1633-2000	Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST) 热塑性塑料维卡软化温度(VST)的测定	China National Standards Plastics Determination temperature	English PDF
GB/T 11998-1989	Determination of glass transitiontemperature of plastics--Thermomechanical analysis 塑料玻璃化温度测定方法热机械分析法	China National Standards Plastics Determination temperature	English PDF

Find out:33Items | To Page of: First -Previous-Next -Last | 1

- Since 2001 -
Focus on China Standards & Compliance Services

www.rjs.cn
China Licenses

www.transcustoms.com
China HS code & Tariff

www.gbstandards.org
China National Standards