Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 27866-2023 |
Technical specification for hardness control of steel pipes and equipment to prevent sulfide stress cRacking of welds {译} 钢制管道和设备防止焊缝硫化物应力开裂的硬度控制技术规范 |
China National Standards Racking |
 English PDF |
| GB/T 43316.6-2023 |
Plastics - Determination of environmental stress cRacking (ESC) resistance - Part 6: Slow strain rate method {译} 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 |
China National Standards Racking |
English PDF |
| GB/T 43316.5-2023 |
Plastics - Determination of environmental stress cRacking (ESC) resistance - Part 5: Constant tensile deformation method {译} 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 |
China National Standards Racking |
English PDF |
| GB/T 43316.4-2023 |
Plastics - Determination of environmental stress cRacking (ESC) resistance - Part 4: Ball or pin pressure method {译} 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 |
China National Standards Racking |
English PDF |
| GB/T 43316.3-2023 |
Plastics - Determination of environmental stress cRacking (ESC) resistance - Part 3: Bending method {译} 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 |
China National Standards Racking |
English PDF |
| GB/T 43316.2-2023 |
Plastics - Determination of environmental stress cRacking (ESC) resistance - Part 2: Constant tensile load method {译} 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 |
China National Standards Racking |
English PDF |
| GB/T 43316.1-2023 |
Plastics - Determination of environmental stress cRacking (ESC) resistance - Part 1: General principles {译} 塑料 耐环境应力开裂(ESC)的测定 第1部分:通则 |
China National Standards Racking |
English PDF |
| GB/T 42348-2023 |
Particle Size Analysis Particle TRacking Analysis (PTA) {译} 粒度分析 颗粒跟踪分析法(PTA) |
China National Standards Racking |
English PDF |
| GB/T 4207-2022 |
Method for determination of tRacking resistance index and relative tracking index of solid insulating materials {译} 固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法 |
China National Standards Racking |
English PDF |
| GB/T 10322.6-2022 |
Determination of hot cRacking index of iron ore for blast furnace charge {译} 高炉炉料用铁矿石 热裂指数的测定 |
China National Standards Racking |
English PDF |
| GB/T 12967.5-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cRacking 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第5部分：抗破裂性的测定 |
China National Standards Racking |
English PDF |
| GB/T 15970.11-2022 |
Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for hydrogen embrittlement and hydrogen-induced cRacking tests of metals and alloys {译} 金属和合金的腐蚀 应力腐蚀试验 第11部分:金属和合金氢脆和氢致开裂试验指南 |
China National Standards Racking |
English PDF |
| GB/T 41792-2022 |
Plastics - Films and sheets - Determination of cold cRacking temperature {译} 塑料制品 薄膜和薄片 冷裂温度的测定 |
China National Standards Racking |
English PDF |
| GB/T 41794-2022 |
Geosynthetics - Evaluation of stress cRacking resistance of polyolefin geomembranes - Notched constant tensile load method {译} 土工合成材料 聚烯烃土工膜耐应力开裂性能的评价 切口恒定拉伸负荷法 |
China National Standards Racking |
English PDF |
| GB/T 41755-2022 |
CRacking susceptibility test of pipeline steel pipe in acidic environment-full ring specimen ellipse deformation method {译} 酸性环境中管线钢管开裂敏感性试验 全环试样椭圆变形法 |
China National Standards Racking |
English PDF |
| GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cRacking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards Racking |
English PDF |
| GB/T 41107.2-2021 |
Destructive tests on welds in metallic materials -- Hot cRacking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第2部分：自拘束试验 |
China National Standards Racking |
English PDF |
| GB/T 41107.1-2021 |
Destructive tests on welds in metallic materials -- Hot cRacking tests for weldments -- Arc welding processes -- Part 1: General 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第1部分：总则 |
China National Standards Racking |
English PDF |
| GB/T 51422-2021 |
Technical standard for auto tRacking and targeting jet suppression system 建筑金属板围护系统检测鉴定及加固技术标准 |
China National Standards Racking |
English PDF |
| GB 51427-2021 |
Technical standard for auto tRacking and targeting jet suppression system 自动跟踪定位射流灭火系统技术标准 |
China National Standards Racking |
English PDF |
| GB/T 38948-2020 |
Evaluation method for the cRacking resistance of asphalt mixture at low temperature 沥青混合料低温抗裂性能评价方法 |
China National Standards Racking |
English PDF |
| GB/T 39681-2020 |
Racking design code for steel static storage systems 立体仓库货架系统设计规范 |
China National Standards Racking |
English PDF |
| GB/T 39454-2020 |
Specification for international trade business data—Cargo tRacking and tracing 国际贸易业务数据规范 货物跟踪与追溯 |
China National Standards Racking |
English PDF |
| GB/T 36797-2018 |
Epoxy resin joint sealant for anti-cRacking in refurbishment 装修防开裂用环氧树脂接缝胶 |
China National Standards Racking |
English PDF |
| GB/T 36676-2018 |
External inspection methodology of stress corrosion cRacking (SCC) for buried steel pipelines 埋地钢质管道应力腐蚀开裂(SCC)外检测方法 |
China National Standards Racking |
English PDF |
| GB/T 35804-2018 |
Rubber, vulcanized or thermoplastic－Resistance to ozone cRacking－Test methods for determining the ozone concentration in laboratory test chambers 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法 |
China National Standards Racking |
English PDF |
| GB/T 34786-2017 |
Grain and oil machinery—Toothed cRacking roll 粮油机械 齿辊式破碎机 |
China National Standards Racking |
English PDF |
| GB/T 4157-2017 |
Laboratory testing of metals for resistance to sulfide stress cRacking and stress corrosion cracking in H2S environment 金属在硫化氢环境中抗硫化物应力开裂和应力腐蚀开裂的实验室试验方法 |
China National Standards Racking |
English PDF |
| GB/T 33578.2-2017 |
Guideline of risk based inspection of complete units—Part 2：Catalytic cRacking units 成套装置基于风险的检验细则 第2部分：催化裂化装置 |
China National Standards Racking |
English PDF |
| GB/T 35437-2017 |
General specification for spaceborne opto-electronic tRacking and imaging system 星载光电跟踪成像系统通用规范 |
China National Standards Racking |
English PDF |
| GB/T 32682-2016 |
Plastics—Determination of environment stress cRacking (ESC) of polyethylene—Full-notch creep test (FNCT) 塑料 聚乙烯环境应力开裂（ESC）的测定 全缺口蠕变试验（FNCT） |
China National Standards Racking |
English PDF |
| GB/T 32525-2016 |
General specification for photoelectric tRacking and measuring equipment 光电跟踪测量设备通用规范 |
China National Standards Racking |
English PDF |
| GB/T 8650-2015 |
Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cRacking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards Racking |
English PDF |
| GB/T 32260.3-2015 |
Destructive tests on welds in metallic materials—Cold cRacking tests for weldments—Arc welding processes—Part 3: Externally load tests 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第3部分：外载荷试验 |
China National Standards Racking |
English PDF |
| GB/T 32260.2-2015 |
Destructive tests on welds in metallic materials—Cold cRacking tests for weldments—Arc welding processes—Part 2: Self-restraint tests 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第2部分：自拘束试验 |
China National Standards Racking |
English PDF |
| GB/T 32260.1-2015 |
Destructive tests on welds in metallic materials—Cold cRacking tests for weldments—Arc welding processes—Part 1: General 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第1部分：总则 |
China National Standards Racking |
English PDF |
| GB/T 30789.4-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 4: Assessment of degree of cRacking 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第4部分：开裂等级的评定 |
China National Standards Racking |
English PDF |
| GB/T 13642-2015 |
Rubber, vulcanized or thermoplastic—Resistance to ozone cRacking—Dynamic strain testing 硫化橡胶或热塑性橡胶 耐臭氧龟裂 动态拉伸试验 |
China National Standards Racking |
English PDF |
| GB/T 7762-2014 |
Rubber, vulcanized or thermoplastic―Resistance to ozone cRacking―Static strain testing 硫化橡胶或热塑性橡胶 耐臭氧龟裂 静态拉伸试验 |
China National Standards Racking |
English PDF |
| GB/T 6553-2014 |
Electrical insulating materials used under severe ambient conditions―Test methods for evaluating resistance to tRacking and erosion 严酷环境条件下使用的电气绝缘材料 评定耐电痕化和蚀损的试验方法 |
China National Standards Racking |
English PDF |
| GB/T 12967.5-2013 |
Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 5：Assessment of resistance of anodic oxidation coatings to cRacking by deformation 铝及铝合金阳极氧化膜检测方法 第5部分：用变形法评定阳极氧化膜的抗破裂性 |
China National Standards Racking |
English PDF |
| GB 9948-2013 |
Seamless steel tubes for petroleum cRacking 石油裂化用无缝钢管 |
China National Standards Racking |
English PDF |
| GB/T 29417-2012 |
Standard test methods for drying shrinkage stress and cRacking possibility of cement mortar and concrete 水泥砂浆和混凝土干燥收缩开裂性能试验方法 |
China National Standards Racking |
English PDF |
| GB/T 4207-2012 |
Method for the determination of the proof and the comparative tRacking indices of solid insulating materials 固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法 |
China National Standards Racking |
English PDF |
| GB/T 29320-2012 |
Technical requirenment for tRacking system of PV power station 光伏电站太阳跟踪系统技术要求 |
China National Standards Racking |
English PDF |
| GB/T 27866-2011 |
Specification of controlling weld hardness of carbon steel and low alloy steel piping and equipment to prevent sulfide stress cRacking 控制钢制管道和设备焊缝硬度防止硫化物应力开裂技术规范 |
China National Standards Racking |
English PDF |
| GB/T 26169-2010 |
Electrical insulating materials - Method to evaluate the resistance to tRacking and erosion - Rotating wheel dip test 电气绝缘材料耐电痕化和电蚀损的评定方法 旋转轮沉浸试验 |
China National Standards Racking |
English PDF |
| GB/T 25996-2010 |
Test method for thermal insulations on external stress corrosion cRacking of austenitic stainless steel 绝热材料对奥氏体不锈钢外部应力腐蚀开裂的试验方法 |
China National Standards Racking |
English PDF |
| GB 25204-2010 |
Auto tRacking and targeting jet suppression system 自动跟踪定位射流灭火系统 |
China National Standards Racking |
English PDF |
| GB/T 24518-2009 |
Corrosion of metals and alloys - Test methods for stress corrosion cRacking in outdoor environments 金属和合金的腐蚀 应力腐蚀室外暴露试验方法 |
China National Standards Racking |
English PDF |
| GB/T 24516.2-2009 |
Corrosion of metals and alloys - Atmospheric corrosion - Sun tRacking exposure test methods 金属和合金的腐蚀 大气腐蚀 跟踪太阳暴露试验方法 |
China National Standards Racking |
English PDF |
| GB/T 11206-2009 |
Standard test method for rubber deterioration - Surface cRacking 橡胶老化试验 表面龟裂法 |
China National Standards Racking |
English PDF |
| GB/T 22640-2008 |
Test method of C-Ring sample to stress-corrosion cRacking for wrought aluminium and aluminium alloys products 铝合金加工产品的环形试样应力腐蚀试验方法 |
China National Standards Racking |
English PDF |
| GB/T 20972.3-2008 |
Petroleum and natural gas industries - Material for use in H2S-containing environments in oil and gas production - part 3: CRacking-resistant CRAs (corrosion-resistant alloys) and other alloys 石油天然气工业 油气开采中用于含硫化氢环境的材料 第3部分：抗开裂耐蚀合金和其他合金 |
China National Standards Racking |
English PDF |
| GB/T 20972.2-2008 |
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: CRacking-resistant carbon and low alloy steels, and the use of cast irons 石油天然气工业 油气开采中用于含硫化氢环境的材料 第2部分：抗开裂碳钢、低合金钢和铸铁 |
China National Standards Racking |
English PDF |
| GB/T 1842-2008 |
Plastics - Test method for environmental stress-cRacking of polyethylene 塑料 聚乙烯环境应力开裂试验方法 |
China National Standards Racking |
English PDF |
| GB/T 2951.41-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cRacking - Measurement of the melt flow index - Carbon bl 电缆和光缆绝缘和护套材料通用试验方法 第41部分：聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分 |
China National Standards Racking |
English PDF |
| GB/T 2951.31-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cRacking 电缆和光缆绝缘和护套材料通用试验方法 第31部分：聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验 |
China National Standards Racking |
English PDF |
| GB/T 3048.7-2007 |
Test methods for electrical properties of electric cables and wires - Part 7: TRacking resistance test 电线电缆电性能试验方法 第7部分：耐电痕试验 |
China National Standards Racking |
English PDF |
| GB/T 20972.1-2007 |
Petroleum and natural gas industries - Material for use in H2S - containing environments in oil and gas production - part 1: General principles for selection of cRacking-resistant materials 石油天然气工业 油气开采中用于含硫化氢环境的材料 第1部分：选择抗裂纹材料的一般原则 |
China National Standards Racking |
English PDF |
| GB/T 13934-2006 |
Rubber，vulcanized or thermoplastic - Determination of flex cRacking and crack growth(De Mattia) 硫化橡胶或热塑性橡胶 屈挠龟裂和裂口增长的测定（德墨西亚型） |
China National Standards Racking |
English PDF |
| GB/T 15819-2006 |
Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cRacking induced by insert-type fittings - Test method and specification 灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 |
China National Standards Racking |
English PDF |
| GB/T 8650-2006 |
Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cRacking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards Racking |
English PDF |
| GB/T 4157-2006 |
Laboratory testing of metals for resistance to specific forms of environmental cRacking in H2S environments 金属在硫化氢环境中抗特殊形式环境开裂实验室试验 |
China National Standards Racking |
English PDF |
| GB/T 20122-2006 |
Corrosion of metals and alloys -- Evaluation of stress corrosion cRacking by the drop evaporation test 金属和合金的腐蚀 滴落蒸发试验的应力腐蚀开裂评价 |
China National Standards Racking |
English PDF |
| GB/T 11299.15-1989 |
Methods of measurement for radio equipment used in satellite earth stations--Part 3:Methods of measurement for combinations of sub-systems--Section five:Antenna tRacking and control 卫星通信地球站无线电设备测量方法 第三部分:分系统组合测量 第五节:天线跟踪和控制 |
China National Standards Racking |
English PDF |
| GB/T 3320.2-1982 |
TRacking ability and channel separation test record 循迹能力、声道分隔度测试唱片 |
China National Standards Racking |
English PDF |
| Find out:67Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
