Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB 24544-2023 |
Fall protection speed difference automatic contRoller {译} 坠落防护 速差自控器 |
China National Standards Roller |
 English PDF |
| GB/T 43342-2023 |
Safety requirements for automatic contRollers of household and similar electrical appliances with remote operation functions {译} 带有远程操作功能的家用和类似用途电器自动控制器的安全要求 |
China National Standards Roller |
English PDF |
| GB/T 43229-2023 |
Communication protocol between traffic signal contRoller and vehicle detector {译} 交通信号控制机与车辆检测器间通信协议 |
China National Standards Roller |
English PDF |
| GB/T 43061-2023 |
Semiconductor integrated circuit PWM contRoller test method {译} 半导体集成电路 PWM控制器测试方法 |
China National Standards Roller |
English PDF |
| GB/T 15969.10-2023 |
Programmable ContRoller Part 10: XML Open Interaction Format for PLC {译} 可编程序控制器 第10部分：PLC的XML开放交互格式 |
China National Standards Roller |
English PDF |
| GB/T 300-2023 |
Rolling bearings Four-row tapered Roller bearings Dimensions {译} 滚动轴承 四列圆锥滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 299-2023 |
Rolling bearings Double row tapered Roller bearings Dimensions {译} 滚动轴承 双列圆锥滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 273.1-2023 |
Rolling bearings - Overall scheme of dimensions - Part 1: Tapered Roller bearings {译} 滚动轴承 外形尺寸总方案 第1部分：圆锥滚子轴承 |
China National Standards Roller |
English PDF |
| GB/T 5859-2023 |
Rolling bearings Thrust spherical Roller bearings Dimensions {译} 滚动轴承 推力调心滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 41103-2022 |
Rolling bearings - Ceramic cylindrical Rollers - Dimensions, product geometric specifications (GPS) and tolerance values {译} 滚动轴承 陶瓷圆柱滚子 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards Roller |
English PDF |
| GB/T 41588.4-2022 |
Road vehicles - ContRoller area network (CAN) - Part 4: Time-triggered communication {译} 道路车辆 控制器局域网（CAN） 第4部分：时间触发通信 |
China National Standards Roller |
English PDF |
| GB/T 41588.3-2022 |
Road vehicles - ContRoller area network (CAN) - Part 3: Low-speed fault-tolerant, media-dependent interfaces {译} 道路车辆 控制器局域网（CAN） 第3部分：低速容错、媒介相关接口 |
China National Standards Roller |
English PDF |
| GB/T 41588.2-2022 |
Road vehicles - ContRoller area network (CAN) - Part 2: High speed media access unit {译} 道路车辆 控制器局域网（CAN） 第2部分：高速媒介访问单元 |
China National Standards Roller |
English PDF |
| GB/T 41588.1-2022 |
Road vehicles - ContRoller area network (CAN) - Part 1: Data link layer and physical signaling {译} 道路车辆 控制器局域网（CAN） 第1部分：数据链路层和物理信令 |
China National Standards Roller |
English PDF |
| GB/T 21944.3-2022 |
Silicon carbide special products - Reaction sintered silicon carbide kiln furniture - Part 3: Rollers {译} 碳化硅特种制品 反应烧结碳化硅窑具 第3部分：辊棒 |
China National Standards Roller |
English PDF |
| GB/T 13564-2022 |
Roller opposite forces type automobile brake tester 滚筒反力式汽车制动检验台 |
China National Standards Roller |
English PDF |
| GB/T 14536.15-2022 |
Electric automatic contRollers - Part 15: Particular requirements for humidity sensitive controllers {译} 电自动控制器 第15部分：湿度敏感控制器的特殊要求 |
China National Standards Roller |
English PDF |
| GB/T 14536.13-2022 |
Electric automatic contRollers - Part 13: Particular requirements for electric door locks {译} 电自动控制器 第13部分：电动门锁的特殊要求 |
China National Standards Roller |
English PDF |
| GB/T 14536.6-2022 |
Electric automatic contRollers - Part 6: Particular requirements for electric automatic control systems for burners {译} 电自动控制器 第6部分：燃烧器电自动控制系统的特殊要求 |
China National Standards Roller |
English PDF |
| GB/T 14536.3-2022 |
Electric automatic contRollers - Part 3: Particular requirements for motor thermal protectors {译} 电自动控制器 第3部分：电动机热保护器的特殊要求 |
China National Standards Roller |
English PDF |
| GB/T 14536.10-2022 |
Electric automatic contRollers - Part 10: Particular requirements for temperature sensitive controllers {译} 电自动控制器 第10部分：温度敏感控制器的特殊要求 |
China National Standards Roller |
English PDF |
| GB/T 14536.1-2022 |
Electric automatic contRollers Part 1: General requirements {译} 电自动控制器 第1部分：通用要求 |
China National Standards Roller |
English PDF |
| GB/T 39693.8-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber Rollers by Zhao's hardness (P&J) method {译} 硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度 |
China National Standards Roller |
English PDF |
| GB/T 39693.7-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber Rollers by the Shore hardness method {译} 硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度 |
China National Standards Roller |
English PDF |
| GB/T 40430-2021 |
Road vehicles—Diagnostic communication over contRoller area network（DoCAN）—Dictionary 道路车辆 基于控制器局域网的诊断通信 符号集 |
China National Standards Roller |
English PDF |
| GB/T 15969.9-2021 |
Programmable contRollers—Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) 可编程序控制器 第9部分：用于小型传感器和执行器的单点数字通信接口(SDCI) |
China National Standards Roller |
English PDF |
| GB/T 39851.2-2021 |
Road vehicles—Diagnostic communication over ContRoller Area Network (DoCAN) —Part 2:Transport protocol and network layer services 道路车辆 基于控制器局域网的诊断通信 第2部分：传输层协议和网络层服务 |
China National Standards Roller |
English PDF |
| GB/T 39819-2021 |
Conveyor belts—Determination of minimum transition distance on three idler Rollers 输送带 三辊托辊最小过渡距离的确定 |
China National Standards Roller |
English PDF |
| GB/T 283-2021 |
Rolling bearings—Cylindrical Roller bearings—Boundary dimensions 滚动轴承 圆柱滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 6445-2021 |
Rolling bearings—Needle Roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 滚轮滚针轴承 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards Roller |
English PDF |
| GB/T 309-2021 |
Rolling bearings—Needle Roller 滚动轴承 滚针 |
China National Standards Roller |
English PDF |
| GB/T 25684.13-2021 |
Earth-moving machinery—Safety—Part 13: Requirements for Rollers 土方机械 安全 第13部分：压路机的要求 |
China National Standards Roller |
English PDF |
| GB/T 20882.4-2021 |
Rolling bearings—Needle Roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 淀粉糖质量要求 第4部分：果葡糖浆 |
China National Standards Roller |
English PDF |
| GB 9706.224-2021 |
Medical electrical equipment—Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and contRollers 医用电气设备 第2-24部分：输液泵和输液控制器的基本安全和基本性能专用要求 |
China National Standards Roller |
English PDF |
| GB/T 40867-2021 |
Technical specifications for unified power flow contRoller 统一潮流控制器技术规范 |
China National Standards Roller |
English PDF |
| GB/T 20096-2021 |
Roller skate 轮滑鞋 |
China National Standards Roller |
English PDF |
| GB/T 39851.3-2021 |
Road vehicles—Diagnostic communication over ContRoller Area Network (DoCAN)—Part 3:Requirements for emissions-related systems 道路车辆 基于控制器局域网的诊断通信 第3部分：排放相关系统的需求 |
China National Standards Roller |
English PDF |
| GB/T 39007-2020 |
Specification of motion control for industrial robots used in programmable contRollers 基于可编程控制器的工业机器人运动控制规范 |
China National Standards Roller |
English PDF |
| GB/T 39028-2020 |
Textile machinery and accessories—Web Roller cards—Terms and definitions 纺织机械与附件 罗拉式梳理成网机 术语和定义 |
China National Standards Roller |
English PDF |
| GB/T 38603-2020 |
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Electronic contRoller 燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 电子控制器 |
China National Standards Roller |
English PDF |
| GB/T 35381.10-2020 |
Tractors and machinery for agriculture and forestry—Serial control and communications data network—Part 10：Task contRoller and management information system data interchange 农林拖拉机和机械 串行控制和通信数据网络 第10部分：任务控制器和管理信息系统的数据交换 |
China National Standards Roller |
English PDF |
| GB/T 39697.2-2020 |
Rubber or plastics covered Rollers—Specifications—Part 2：Surface characteristics 橡胶或塑料包覆辊 规范 第2部分：表面特性 |
China National Standards Roller |
English PDF |
| GB/T 39697.1-2020 |
Rubber or plastics covered Rollers—Specifications—Part 1: Requirements for hardness 橡胶或塑料包覆辊 规范 第1部分：硬度要求 |
China National Standards Roller |
English PDF |
| GB/T 39693.6-2020 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered Rollers by IRHD method 硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度 |
China National Standards Roller |
English PDF |
| GB/T 5801-2020 |
Rolling bearings—Needle Roller bearings with machined rings—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 机制套圈滚针轴承 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards Roller |
English PDF |
| GB/T 39393-2020 |
Technical specification of intelligent contRoller unit for household appliances 家用电器专用智能控制单元技术规范 |
China National Standards Roller |
English PDF |
| GB/T 38369-2019 |
Directional vibratory Roller 定向振动压路机 |
China National Standards Roller |
English PDF |
| GB/T 19903.14-2019 |
Automation systems and integration—Physical device control—Data model for computerized numerical contRollers—Part 14: Process data for sink electrical discharge machining (sink-EDM) 自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第14部分：电火花成形加工用工艺数据 |
China National Standards Roller |
English PDF |
| GB/T 19903.13-2019 |
Automation systems and integration—Physical device control—Data model for computerized numerical contRollers—Part 13: Process data for wire electrical discharge machining (wire-EDM) 自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第13部分：电火花线切割加工用工艺数据 |
China National Standards Roller |
English PDF |
| GB/T 32017-2019 |
Roller ball pens and refills 水性墨水圆珠笔和笔芯 |
China National Standards Roller |
English PDF |
| GB/T 37414.1-2019 |
Industrial Robot Electrical Equipment and Systems Part1: Requirements for ContRoller 工业机器人电气设备及系统 第1部分：控制装置技术条件 |
China National Standards Roller |
English PDF |
| GB/T 37448-2019 |
Ships and marine technology—Ships mooring and towing fittings—Shipside Roller fairleads 船舶和海上技术 船舶系泊和拖带设备 舷边滚轮导缆器 |
China National Standards Roller |
English PDF |
| GB/T 37089-2018 |
Reciprocating internal combustion engine driven alternating current generating sets—ContRoller 往复式内燃机驱动的交流发电机组-控制器 |
China National Standards Roller |
English PDF |
| GB/T 8511-2018 |
Vibratory Roller 振动压路机 |
China National Standards Roller |
English PDF |
| GB/T 36217-2018 |
Ships and marine technology—Ship’s mooring and towing fittings—Universal fairleads with upper Roller 船舶与海上技术 船舶系泊和拖带设备 带上滚柱导缆器 |
China National Standards Roller |
English PDF |
| GB/T 36413.1-2018 |
Automation system-Embedded smart contRoller-Part1：General requirements 自动化系统 嵌入式智能控制器 第1部分：通用要求 |
China National Standards Roller |
English PDF |
| GB/T 36512-2018 |
General requirements for solid-state remote power contRollers of aircraft 飞机固态远程功率控制器通用要求 |
China National Standards Roller |
English PDF |
| GB/T 36257-2018 |
General requirements for hybrid remote power contRollers of aircraft 飞机混合式远程功率控制器通用要求 |
China National Standards Roller |
English PDF |
| GB/T 36582-2018 |
Ships and marine technology—Ship’s mooring and towing fittings—Universal fairleads without upper Roller 船舶与海上技术 船舶系泊和拖带设备 无上滚柱导缆器 |
China National Standards Roller |
English PDF |
| GB/T 36664-2018 |
Ships and marine technology—Ship’s mooring and towing fittings—Steel Rollers 船舶和海上技术 船舶系泊和拖带设备 导缆滚轮 |
China National Standards Roller |
English PDF |
| GB/T 25626-2018 |
Impact Roller 冲击压路机 |
China National Standards Roller |
English PDF |
| GB/T 6098-2018 |
Test method for length of cotton fibres—Roller analyser 棉纤维长度试验方法 罗拉式分析仪法 |
China National Standards Roller |
English PDF |
| GB/T 35944-2018 |
Grain and oil machinery—Wheat Roller mill for inspection 粮油机械 检验用辊式小麦磨粉机 |
China National Standards Roller |
English PDF |
| GB/T 36054-2018 |
Top Roller of float glass 浮法玻璃拉边机 |
China National Standards Roller |
English PDF |
| GB/T 36011-2018 |
Sampling check and routine test method for programmable contRoller 可编程序控制器抽样检查和例行试验方法 |
China National Standards Roller |
English PDF |
| GB/T 36009-2018 |
Evaluating method of programmable contRollers’ performance 可编程序控制器性能评定方法 |
China National Standards Roller |
English PDF |
| GB/T 34787-2017 |
Grain and oil machinery—Roller separator 粮油机械 滚筒精选机 |
China National Standards Roller |
English PDF |
| GB/T 34923.4-2017 |
Street lights control and management system—Part 4: Technical specification of street lights contRoller 路灯控制管理系统 第4部分：路灯控制器技术规范 |
China National Standards Roller |
English PDF |
| GB/T 34521-2017 |
ContRoller of small wind turbines 小型风力发电机组用控制器 |
China National Standards Roller |
English PDF |
| GB/T 34573-2017 |
Railway applications—Master contRoller 轨道交通 司机控制器 |
China National Standards Roller |
English PDF |
| GB/T 23659-2017 |
Rubber Roller for manifdder 复印机胶辊 |
China National Standards Roller |
English PDF |
| GB/T 33935-2017 |
Vertical Roller mill—Repair specifications for liners of the grinding table and liners（roll sheath）of the grinding roller 立磨 磨盘、磨辊衬板(辊套)修复规范 |
China National Standards Roller |
English PDF |
| GB/T 33938-2017 |
Vertical Roller mill laboratory bench application test method 立磨试验台应用试验方法 |
China National Standards Roller |
English PDF |
| GB/T 33939-2017 |
Vertical Roller mill—Casting liner of the grinding roller and the grinding table—Requirement 立式辊磨机 磨辊与磨盘铸造衬板 技术条件 |
China National Standards Roller |
English PDF |
| GB/T 15969.3-2017 |
Programmable contRollers—Part 3: Programming languages 可编程序控制器 第3部分：编程语言 |
China National Standards Roller |
English PDF |
| GB/T 6069-2017 |
Roller chain coupling 滚子链联轴器 |
China National Standards Roller |
English PDF |
| GB/T 4663-2017 |
Rolling bearings—Cylindrical thrust Roller bearings—Boundary dimensions 滚动轴承 推力圆柱滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 35168-2017 |
Roller press for cement industry 水泥工业用辊压机 |
China National Standards Roller |
English PDF |
| GB 12260-2017 |
Cardiopulmonary bypass systems—Roller blood pump 心肺转流系统 滚压式血泵 |
China National Standards Roller |
English PDF |
| GB/T 35167-2017 |
Vertical Roller mill for cement 水泥立式辊磨机 |
China National Standards Roller |
English PDF |
| GB/T 17499-2017 |
Microcomputer contRoller for household washing machine 家用洗衣机电脑程序控制器 |
China National Standards Roller |
English PDF |
| GB/T 20999-2017 |
Data communication protocol between traffic signal contRoller and control center 交通信号控制机与上位机间的数据通信协议 |
China National Standards Roller |
English PDF |
| GB/T 290-2017 |
Rolling bearings－Needle Roller bearings with drawn cup and without inner ring－Boundary dimensions 滚动轴承 无内圈冲压外圈滚针轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 14048.12-2016 |
Low-voltage switchgear and controlgear—Part 4-3: Contactors and motor-starters—AC semiconductor contRollers and contactors for non-motor loads 低压开关设备和控制设备 第4-3部分：接触器和电动机起动器 非电动机负载用交流半导体控制器和接触器 |
China National Standards Roller |
English PDF |
| GB 25280-2016 |
Road traffic signal contRoller 道路交通信号控制机 |
China National Standards Roller |
English PDF |
| GB/T 33008.1-2016 |
Industrial automation and control system security—Programmable logic contRoller(PLC)—Part 1: System requirements 工业自动化和控制系统网络安全 可编程序控制器（PLC） 第1部分：系统要求 |
China National Standards Roller |
English PDF |
| GB/T 14048.6-2016 |
Low-voltage switchgear and controlgear—Part 4-2: Contactors and motor-starters—AC semiconductor motor contRollers and starters (including soft-starters) 低压开关设备和控制设备 第4-2部分：接触器和电动机起动器 交流电动机用半导体控制器和起动器(含软起动器) |
China National Standards Roller |
English PDF |
| GB/T 14808-2016 |
High-voltage alternating current contactors, contactor-based contRollers and motorstarters 高压交流接触器、基于接触器的控制器及电动机起动器 |
China National Standards Roller |
English PDF |
| GB/T 32595-2016 |
Electric contRoller for railway passenger car and multiple unit 铁道客车及动车组用电气控制柜 |
China National Standards Roller |
English PDF |
| GB/T 4661-2015 |
Rolling bearings—Cylindrical Rollers 滚动轴承 圆柱滚子 |
China National Standards Roller |
English PDF |
| GB/T 32372-2015 |
Evaluation of the effectiveness of surface treatment techniques for aluminium use in adhesives by wet-peel test by floating-Roller 浮辊法湿剥离强度评价粘接用铝材表面处理有效性的试验方法 |
China National Standards Roller |
English PDF |
| GB/T 20056-2015 |
Rolling bearings—Radial needle Roller and cage assemblies—Boundary dimensions and tolerances 滚动轴承 向心滚针和保持架组件 外形尺寸和公差 |
China National Standards Roller |
English PDF |
| GB/T 32197-2015 |
Robot contRoller open communication interface profile 机器人控制器开放式通信接口规范 |
China National Standards Roller |
English PDF |
| GB/T 15969.6-2015 |
Programmable contRollers—Part 6: Functional safety 可编程序控制器 第6部分：功能安全 |
China National Standards Roller |
English PDF |
| GB/T 18148-2015 |
Earth-moving machinery—Testing method of the compaction performance of Rollers and compactors 土方机械 压实机械压实性能试验方法 |
China National Standards Roller |
English PDF |
| GB/T 32017-2015 |
Roller ball pens and refills 水性墨水圆珠笔和笔芯 |
China National Standards Roller |
English PDF |
| GB/T 31399-2015 |
Sinking rubber Roller for cold rolled sheet 冷轧橡胶沉没辊 |
China National Standards Roller |
English PDF |
| GB/T 297-2015 |
Rolling bearings—Tapered Roller bearings—Boundary dimensions 滚动轴承 圆锥滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 16643-2015 |
Rolling bearings—Combined needle Roller thrust roller bearings—Boundary dimensions 滚动轴承 滚针和推力圆柱滚子组合轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 20819.2-2015 |
ContRollers with analogue signals for use in industrial-process control systems—Part 2: Guidance for inspection and routine testing 工业过程控制系统用模拟信号调节器 第2部分：检查和例行试验导则 |
China National Standards Roller |
English PDF |
| GB/T 20819.1-2015 |
ContRollers with analogue signals for use in industrial-process control system—Part 1: Methods of evaluating the performance 工业过程控制系统用模拟信号调节器 第1部分：性能评定方法 |
China National Standards Roller |
English PDF |
| GB/T 32017-2015 |
Roller ball pens and refills 水性墨水圆珠笔和笔芯 |
China National Standards Roller |
English PDF |
| GB/T 31137-2014 |
Temperature contRoller for laboratory resistance furnaces 实验电阻炉温度控制器 |
China National Standards Roller |
English PDF |
| GB/T 5275.7-2014 |
Gas analysis―Preparation of calibration gas mixtures using dynamic volumetric methods―Part 7: Thermal mass-flow contRollers 气体分析 动态体积法制备校准用混合气体 第7部分：热式质量流量控制器 |
China National Standards Roller |
English PDF |
| GB/T 18858.7-2014 |
Low-voltage switchgear and controlgear-contRoller-device interfaces (CDIs)―Part 7: CompoNet 低压开关设备和控制设备 控制器 设备接口（CDIs） 第7部分：CompoNet |
China National Standards Roller |
English PDF |
| GB/T 30502-2014 |
Traffic signal contRoller for lanes on urban road 城市道路车道交通信号控制机 |
China National Standards Roller |
English PDF |
| GB/T 30405-2013 |
Tannery machines—Reciprocating Roller machines—Safety requirements 皮革机械 辊式往复运动机械 安全要求 |
China National Standards Roller |
English PDF |
| GB/T 30205-2013 |
General requirements for solid remote power contRoller of aircraft 飞机固态遥控功率控制器通用要求 |
China National Standards Roller |
English PDF |
| GB/T 30104.205-2013 |
Digital addressable lighting interface―Part 205: Particular requirements for control gear―Supply voltage contRoller for incandescent lamps (device type 4) 数字可寻址照明接口 第205部分：控制装置的特殊要求 白炽灯电源电压控制器（设备类型4） |
China National Standards Roller |
English PDF |
| GB/T 30162-2013 |
Textile machinery―Cloth Rollers―Terminology and main dimensions 纺织机械 卷布辊 术语和主要尺寸 |
China National Standards Roller |
English PDF |
| GB/T 19903.111-2013 |
Industrial automation systems and integration - Physical device control - Data model for computerized numerical contRollers - Part 111: Tools for milling machines 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第111部分：铣床用刀具 |
China National Standards Roller |
English PDF |
| GB/T 16656.238-2013 |
Industrial automation systems and integration - Product data representation and exchange - Part 238: Application protocol: Application interpreted model for computerized numeric contRollers 工业自动化系统与集成 产品数据表达与交换 第238部分：应用协议：计算机数值控制器用的应用解释模型 |
China National Standards Roller |
English PDF |
| GB/T 29792-2013 |
Developing magnetic Roller for electrostatic copying(printing) device 静电复印（打印）设备用显影磁辊 |
China National Standards Roller |
English PDF |
| GB/T 29771.1-2013 |
Numerical contRoller of industrial machines - Part 1: General requipments 工业机械数字控制器 第1部分：通用技术条件 |
China National Standards Roller |
English PDF |
| GB/T 288-2013 |
Rolling bearings - Self-aligning Roller bearings - Boundary dimensions 滚动轴承 调心滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 285-2013 |
Rolling bearings - Double row cylindrical Roller bearings - Boundary dimensions 滚动轴承 双列圆柱滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 29254-2012 |
Laboratory autoclave contRoller 实验室反应釜用控制器 |
China National Standards Roller |
English PDF |
| GB 1103.2-2012 |
Cotton - Part 2: Roller ginned upland cotton 棉花 第2部分：皮辊加工细绒棉 |
China National Standards Roller |
English PDF |
| GB/T 28737-2012 |
ContRoller for solar water heating system (tank volume more than 0.6 m3) 太阳能热水系统(储水箱容积大于0.6 m3)控制装置 |
China National Standards Roller |
English PDF |
| GB/T 18858.3-2012 |
Low-voltage switchgear and controlgear - ContRoller-device interface(CDIs) - Part 3: DeviceNet 低压开关设备和控制设备 控制器 设备接口(CDI) 第3部分：DeviceNet |
China National Standards Roller |
English PDF |
| GB/T 18858.2-2012 |
Low-voltage switchgear and controlgear - ContRoller-device interfaces(CDIs) - Part 2: Actuator sensor interface(AS-i) 低压开关设备和控制设备 控制器 设备接口(CDI) 第2部分:执行器传感器接口(AS-i) |
China National Standards Roller |
English PDF |
| GB/T 18858.1-2012 |
Low-voltage switchgear and controlgear - ContRoller-Device interfaces (CDIs) - Part 1: General rules 低压开关设备和控制设备 控制器 设备接口(CDI) 第1部分: 总则 |
China National Standards Roller |
English PDF |
| GB/T 20057-2012 |
Rolling bearings - Single-row cylindrical Roller bearings - Chamfer dimensions for loose rib and non-rib sides 滚动轴承 圆柱滚子轴承 平挡圈和套圈无挡边端倒角尺寸 |
China National Standards Roller |
English PDF |
| GB/T 28556-2012 |
Flameproof and intrinsically safe contRoller with frequency converter for coalmine ventilation fan 煤矿通风机用隔爆兼本质安全型变频调速控制器 |
China National Standards Roller |
English PDF |
| GB/T 28423-2012 |
Electronic toll collection － Interface between roadside unit and lane contRoller 电子收费 路侧单元与车道控制器接口 |
China National Standards Roller |
English PDF |
| GB/T 27559-2011 |
Rolling bearing - Cylindrical Roller bearings for spindles of machines 滚动轴承 机床主轴用圆柱滚子轴承 |
China National Standards Roller |
English PDF |
| GB/T 273.1-2011 |
Rolling bearings-Boundary dimensions general plan-Part 1:Tapered Roller bearings 滚动轴承 外形尺寸总方案 第1部分：圆锥滚子轴承 |
China National Standards Roller |
English PDF |
| GB/T 20060-2011 |
Rolling bearings - Cylindrical Roller bearings,separate thrust collars - Boundary dimensions 滚动轴承 圆柱滚子轴承 可分离斜挡圈 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 27505-2011 |
Pressure contRoller 压力控制器 |
China National Standards Roller |
English PDF |
| GB/T 15793-2011 |
Rules of monitoring and forecasting for the rice leaf-Roller(Cnaphalocrocis medinalis Guenee) 稻纵卷叶螟测报技术规范 |
China National Standards Roller |
English PDF |
| GB/T 26849-2011 |
Electronic contRollers for solar photovoltaic (PV) lighting - Performance specifications 太阳能光伏照明用电子控制装置 性能要求 |
China National Standards Roller |
English PDF |
| GB/T 26846-2011 |
Lead-out wire and connector of motor and contRoller used for electric bicycles 电动自行车用电机和控制器的引出线及接插件 |
China National Standards Roller |
English PDF |
| GB 25684.13-2010 |
Earth-moving machinery - Safety - Part 13: Requirements for Rollers 土方机械 安全 第13部分：压路机的要求 |
China National Standards Roller |
English PDF |
| GB/T 25768-2010 |
Rolling bearings - Combined needle Roller bearings with double direction thrust cylindrical roller bearings 滚动轴承 滚针和双向推力圆柱滚子组合轴承 |
China National Standards Roller |
English PDF |
| GB/T 25767-2010 |
Rolling bearings - Tapered Rollers 滚动轴承 圆锥滚子 |
China National Standards Roller |
English PDF |
| GB/T 25764-2010 |
Rolling bearings - Roller bearings for automobile transmission 滚动轴承 汽车变速箱用滚子轴承 |
China National Standards Roller |
English PDF |
| GB/T 25763-2010 |
Rolling bearings - Needle Roller bearings for automotive transmission 滚动轴承 汽车变速箱用滚针轴承 |
China National Standards Roller |
English PDF |
| GB/T 25762-2010 |
Rolling bearings - Needle Roller and cage assemblies for motorcycle connecting rod 滚动轴承 摩托车连杆支承用滚针和保持架组件 |
China National Standards Roller |
English PDF |
| GB/T 25761-2010 |
Rolling bearings - Combined needle Roller bearings with angular contact ball bearings - Boundary dimensions 滚动轴承 滚针和角接触球组合轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 25760-2010 |
Rolling bearings - Combined needle Roller bearings with thrust ball bearings - Boundary dimensions 滚动轴承 滚针和推力球组合轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 25728-2010 |
Grain and oil machinery - Pneumatic Rollermill 粮油机械 气压磨粉机 |
China National Standards Roller |
English PDF |
| GB/T 25626-2010 |
Impact Roller 冲击压路机 |
China National Standards Roller |
English PDF |
| GB/T 25298-2010 |
The general specifications for resistance welding contRoller 电阻焊机控制器 通用技术条件 |
China National Standards Roller |
English PDF |
| GB 25280-2010 |
Road traffic signal contRoller 道路交通信号控制机 |
China National Standards Roller |
English PDF |
| GB/T 24968-2010 |
Toll lane contRoller of highway 公路收费车道控制机 |
China National Standards Roller |
English PDF |
| GB/T 24610.4-2009 |
Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical Roller bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第4部分：具有圆柱孔和圆柱外表面的圆柱滚子轴承 |
China National Standards Roller |
English PDF |
| GB/T 24659.3-2009 |
Agricultural crawler tractors - Support Roller - Requirement 农业履带拖拉机 支重轮 技术条件 |
China National Standards Roller |
English PDF |
| GB/T 24610.3-2009 |
Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered Roller bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第3部分：具有圆柱孔和圆柱外表面的调心滚子轴承和圆锥滚子轴承 |
China National Standards Roller |
English PDF |
| GB/T 12764-2009 |
Rolling bearings - Needle Roller bearings,drawn cup without inner ring - Boundary dimensions and tolerances 滚动轴承 无内圈、冲压外圈滚针轴承 外形尺寸和公差 |
China National Standards Roller |
English PDF |
| GB 24429-2009 |
Sports helmets - Safety requirements and testing methods for sports helmets for cyclists and users of skateboards and Roller skates 运动头盔 自行车、滑板、轮滑运动头盔的安全要求和试验方法 |
China National Standards Roller |
English PDF |
| GB/T 24376-2009 |
Textile machinery and accessories - Spinning preparatory and spinning machinery - Main dimensions of coverings for top Rollers 纺织机械与附件 纺纱准备和纺纱机械 上罗拉包覆物的主要尺寸 |
China National Standards Roller |
English PDF |
| GB/T 24375-2009 |
Textile machinery and accessories - Bottom fluter Rollers for drafting systems 纺织机械与附件 牵伸装置用下罗拉 |
China National Standards Roller |
English PDF |
| GB/T 23888-2009 |
ContRoller for domestic solar water heating system 家用太阳能热水系统控制器 |
China National Standards Roller |
English PDF |
| GB/T 23659-2009 |
Rubber Roller for manifdder 复印机胶辊 |
China National Standards Roller |
English PDF |
| GB/T 23637-2009 |
Master contRoller in ships 船用主令控制器 |
China National Standards Roller |
English PDF |
| GB/T 22801-2009 |
Textile machinery - Guide Rollers for dyeing and finishing machinery - Main dimensions and working performance requirements 纺织机械 染整机器导布辊 主要尺寸及要求 |
China National Standards Roller |
English PDF |
| GB/T 22710-2008 |
Electronic contRoller for low-voltage circuit breaker 低压断路器用电子式控制器 |
China National Standards Roller |
English PDF |
| GB/T 23142-2008 |
Preset power contRoller for high pressure sodium lamps - Performance requirements 高压钠灯用预置功率控制器 |
China National Standards Roller |
English PDF |
| GB/T 17499-2008 |
Microcomputer contRoller for household washing machine 家用洗衣机电脑程序控制器 |
China National Standards Roller |
English PDF |
| GB/T 19903.121-2008 |
Industrial automation systems and integration - Physical device control - Data model for computerized numerical contRollers - Part 121: Tools for turning machines 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第121部分：车床用刀具 |
China National Standards Roller |
English PDF |
| GB/T 19903.12-2008 |
Industrial automation systems and integration - Physical device control - Data model for computerized numerical contRollers - Part 12: Process data for turning 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第12部分：车削用工艺数据 |
China National Standards Roller |
English PDF |
| GB/T 5269-2008 |
Double-pitch precision Roller chains, attachments and associated chain sprockets for transmission and conveyors 传动与输送用双节距精密滚子链、附件和链轮 |
China National Standards Roller |
English PDF |
| GB/T 22136-2008 |
Industrial-process control system - Classification of adaptive contRollers for the purpose of evaluation 工业过程控制系统 评估用自适应控制器分类 |
China National Standards Roller |
English PDF |
| GB/T 15969.7-2008 |
Programmable contRollers - Part 7: Fuzzy control programming 可编程序控制器 第7部分：模糊控制编程 |
China National Standards Roller |
English PDF |
| GB/T 15969.2-2008 |
Programmable contRollers - Part 2: Equipment requirements and tests 可编程序控制器 第2部分: 设备要求和测试 |
China National Standards Roller |
English PDF |
| GB/T 21944.3-2008 |
Special products of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 3：Rollers 碳化硅特种制品 反应烧结碳化硅窑具 第3部分：辊棒 |
China National Standards Roller |
English PDF |
| GB/T 21642.1-2008 |
The technical requirements for video conference system devices based on IP-based network - Part 1: Multipoint ContRoller 基于IP网络的视讯会议系统设备技术要求 第1部分：多点控制器（MC） |
China National Standards Roller |
English PDF |
| GB/T 21538-2008 |
Rubber Roller for metal foil-purpose coating 金属薄板用涂覆胶辊 |
China National Standards Roller |
English PDF |
| GB/T 19903.11-2008 |
Industrial automation systems and integration - Physical device control - Data model for computerized numerical contRollers - Part 11: process data for milling 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第11部分: 铣削用工艺数据 |
China National Standards Roller |
English PDF |
| GB 14048.6-2008 |
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters AC semiconductor motor contRollers and starters(including soft-starter) 低压开关设备和控制设备 第4-2部分：接触器和电动机起动器 交流半导体电动机控制器和起动器（含软起动器） |
China National Standards Roller |
English PDF |
| GB/T 5859-2008 |
Rolling bearings - Self -aligning thrust Roller bearings - Boundary dimensions 滚动轴承 推力调心滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 300-2008 |
Rolling bearings - Four row tapered Roller bearings - Boundary dimensions 滚动轴承 四列圆锥滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 299-2008 |
Rolling bearings - Double row tapered Roller bearings - Boundary dimensions 滚动轴承 双列圆锥滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 21208-2007 |
Low-voltage switchgear and controlgear - ContRollers for drivers of stationary fire pumps 低压开关设备和控制设备 固定式消防泵驱动器的控制器 |
China National Standards Roller |
English PDF |
| GB/T 21307-2007 |
Roller gin 皮辊轧花机 |
China National Standards Roller |
English PDF |
| GB/T 15969.4-2007 |
Programmable contRollers - Part 4: User guidelines 可编程序控制器 第4部分：用户导则 |
China National Standards Roller |
English PDF |
| GB/T 15969.1-2007 |
Programmable contRollers - Part 1: General information 可编程序控制器 第1部分：通用信息 |
China National Standards Roller |
English PDF |
| GB/T 20999-2007 |
Data communication protocol between traffic signal contRoller and control center 交通信号控制机与上位机间的数据通信协议 |
China National Standards Roller |
English PDF |
| GB/T 13563-2007 |
Roller automobile speedometer tester 滚筒式汽车车速表检验台 |
China National Standards Roller |
English PDF |
| GB/T 15160-2007 |
Land mobile communication system requirements using multi-channel access techniques without a central contRoller 无中心多信道选址移动通信系统体制 |
China National Standards Roller |
English PDF |
| GB/T 6445-2007 |
Rolling bearings - Needle Roller bearing track rollers - Boundary dimensions and tolerances 滚动轴承 滚轮滚针轴承 外形尺寸和公差 |
China National Standards Roller |
English PDF |
| GB/T 283-2007 |
Rolling bearings - Cylindrical Roller bearings - Boundary dimensions 滚动轴承 圆柱滚子轴承 外形尺寸 |
China National Standards Roller |
English PDF |
| GB/T 15969.8-2007 |
Programmable contRollers - Part 8: Guidelines for the application and implementation of programming languages 可编程序控制器 第8部分：编程语言的应用和实现导则 |
China National Standards Roller |
English PDF |
| GB/T 20819.2-2007 |
ContRollers with analogue signals for use industrial-process control system - Part 2: Guidance for inspection and routine testing 工业过程控制系统用模拟信号控制器 第2部分：检查和例行试验导则 |
China National Standards Roller |
English PDF |
| GB/T 20819.1-2007 |
ContRollers with analogue signals for use industrial-process control system - Part 1: Methods of evaluating the performance 工业过程控制系统用模拟信号控制器 第1部分：性能评定方法 |
China National Standards Roller |
English PDF |
| GB/T 20736-2006 |
Fatigue test method for transmission precision Roller chain 传动用精密滚子链条疲劳试验方法 |
China National Standards Roller |
English PDF |
| GB/T 18150-2006 |
Guidelines for the selection of Roller chain drives 滚子链传动选择指导 |
China National Standards Roller |
English PDF |
| GB/T 1243-2006 |
Short-pitch transmission precision Roller and bush chains, attachments and associated chain sprockets 传动用短节距精密滚子链、套筒链、附件和链轮 |
China National Standards Roller |
English PDF |
| GB/T 19903.10-2006 |
Industrial automation systems and integration - Physical device control - Data model for computerized numerical contRollers - Part 10: General process data 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第10部分：通用工艺数据 |
China National Standards Roller |
English PDF |
| GB/T 18488.2-2006 |
The electrical machines and contRollers for electric vehicles - Part 2: Test methods 电动汽车用电机及其控制器 第2部分：试验方法 |
China National Standards Roller |
English PDF |
| GB/T 18488.1-2006 |
The electrical machines and contRollers for electric vehicles - Part 1：General specification 电动汽车用电机及其控制器 第1部分：技术条件 |
China National Standards Roller |
English PDF |
| GB/T 14048.12-2006 |
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters-AC semiconductor contRollers and contactors for non-motor loads 低压开关设备和控制设备 第4-3部分：接触器和电动机起动器-非电动机负载用交流半导体控制器和接触器 |
China National Standards Roller |
English PDF |
| GB/T 6098.1-2006 |
Test method for length of cotton fibres - Part 1: Roller analyser 棉纤维长度试验方法 第1部分：罗拉式分析仪法 |
China National Standards Roller |
English PDF |
| GB/T 20086-2006 |
Equipment for working the soil - Roller sections - Coupling and section width 土壤耕作机械 镇压器 联接方式和工作幅宽 |
China National Standards Roller |
English PDF |
| GB 20096-2006 |
Roller skate 轮滑鞋 |
China National Standards Roller |
English PDF |
| GB/T 5801-2006 |
Rolling bearings - Needle Roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances 滚动轴承 48、49和69尺寸系列滚针轴承 外形尺寸和公差 |
China National Standards Roller |
English PDF |
| GB 9706.27-2005 |
Medical eletrical equipment Part2:Particular requirements for the safety of infusion pumps and contRollers 医用电气设备 第2部分:输液泵和输液控制器安全专用要求 |
China National Standards Roller |
English PDF |
| GB/T 10857-2005 |
Steel Roller chains,types S and C,attachments and sprockets S型和C型钢制滚子链条，附件和链轮 |
China National Standards Roller |
English PDF |
| GB/T 19903.1-2005 |
Industrial automation systems and integration-Physical device control-Data model for computerized numerical contRollers-Part 1:Overview and fundamental principles 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第1部分：概述和基本原理 |
China National Standards Roller |
English PDF |
| GB/T 13328-2005 |
General requirement for Rollers 压路机通用要求 |
China National Standards Roller |
English PDF |
| Find out:226Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
