Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 22309-2023 |
Road vehicles - Brake linings - Test methods for shear Strength of disc brake pad assemblies and drum brake shoe assemblies {译} 道路车辆 制动衬片 盘式制动块总成和鼓式制动蹄总成剪切强度试验方法 |
China National Standards Strength |
 English PDF |
| GB/T 5072-2023 |
Refractory materials - Normal temperature compressive Strength test method {译} 耐火材料 常温耐压强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 18849-2023 |
Motorized Industrial Vehicles Brake Performance and Part Strength {译} 机动工业车辆 制动器性能和零件强度 |
China National Standards Strength |
English PDF |
| GB/T 18329.2-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 2: Destructive testing of bonding Strength for alloys with thickness ≥ 2 mm {译} 滑动轴承 多层金属滑动轴承 第2部分：合金厚度≥2mm的结合强度破坏性试验 |
China National Standards Strength |
English PDF |
| GB/T 1965-2023 |
Porous ceramics - test method for room temperature flexural Strength {译} 多孔陶瓷 室温弯曲强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 1964-2023 |
Porous ceramics - Test method for compressive Strength at room temperature {译} 多孔陶瓷 室温压缩强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 2493-2023 |
Grinding tool rotational Strength test method {译} 磨具回转强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 43400-2023 |
Road vehicles Trailers below 3.5t Calculation of mechanical Strength of steel drawbars {译} 道路车辆 3.5t以下挂车 钢制牵引杆机械强度计算 |
China National Standards Strength |
English PDF |
| GB/T 23101.4-2023 |
Surgical implants Hydroxyapatite Part 4: Determination of coating bond Strength {译} 外科植入物 羟基磷灰石 第4部分：涂层粘结强度的测定 |
China National Standards Strength |
English PDF |
| GB 13057-2023 |
Strength of passenger car seats and their vehicle fasteners {译} 客车座椅及其车辆固定件的强度 |
China National Standards Strength |
English PDF |
| GB/T 43151-2023 |
Weathering steel high-Strength bolt connection pair for steel structures {译} 钢结构用耐候钢高强度螺栓连接副 |
China National Standards Strength |
English PDF |
| GB/T 43091-2023 |
Powder compressive Strength test method {译} 粉末抗压强度测试方法 |
China National Standards Strength |
English PDF |
| GB/T 34506-2023 |
High Strength and high toughness Al-Zn-Mg-Cu series aluminum alloy extruded materials {译} 高强高韧型Al-Zn-Mg-Cu系铝合金挤压材 |
China National Standards Strength |
English PDF |
| GB/T 34480-2023 |
High Strength and high toughness Al-Zn-Mg-Cu series aluminum alloy forgings {译} 高强高韧型Al-Zn-Mg-Cu系铝合金锻件 |
China National Standards Strength |
English PDF |
| GB/T 33368-2023 |
High-Strength and damage-resistant Al-Cu-Mg aluminum alloy plates and strips {译} 高强耐损伤型Al-Cu-Mg系铝合金板、带材 |
China National Standards Strength |
English PDF |
| GB/T 26203-2023 |
Paper and paperboard - Determination of internal bond Strength (Scott type) {译} 纸和纸板 内结合强度的测定（Scott型） |
China National Standards Strength |
English PDF |
| GB/T 10357.5-2023 |
Furniture mechanical properties test Part 5: Cabinet Strength and durability {译} 家具力学性能试验 第5部分：柜类强度和耐久性 |
China National Standards Strength |
English PDF |
| GB/T 42897-2023 |
Microelectromechanical systems (MEMS) technology Silicon-based MEMS nano-thickness film tensile Strength test method {译} 微机电系统（MEMS）技术 硅基MEMS纳米厚度膜抗拉强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 42895-2023 |
Microelectromechanical systems (MEMS) technology Silicon-based MEMS microstructure bending Strength test method {译} 微机电系统（MEMS）技术 硅基MEMS微结构弯曲强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 17928-2023 |
Leather - Physical and mechanical tests - Determination of pinhole tear Strength {译} 皮革 物理和机械试验 针孔撕裂强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 42667-2023 |
Test method for room temperature isobiaxial bending Strength of fine ceramics - double loop method {译} 精细陶瓷室温等双轴弯曲强度试验方法 双环法 |
China National Standards Strength |
English PDF |
| GB/T 42665-2023 |
Test method for spherical indentation Strength of porous ceramics {译} 多孔陶瓷球形压痕强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 42910-2023 |
Test method for high temperature compression shear Strength of inorganic adhesives {译} 无机胶粘剂高温压缩剪切强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 20564.14-2023 |
High-Strength cold-rolled steel plates and strips for automobiles Part 14: Low-density steel {译} 汽车用高强度冷连轧钢板及钢带 第14部分：低密度钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.13-2023 |
High-Strength cold-rolled steel plates and strips for automobiles Part 13: Medium manganese steel {译} 汽车用高强度冷连轧钢板及钢带 第13部分：中锰钢 |
China National Standards Strength |
English PDF |
| GB/T 713.6-2023 |
Steel plates and strips for pressure-bearing equipment Part 6: Quenched and tempered high-Strength steels {译} 承压设备用钢板和钢带 第6部分：调质高强度钢 |
China National Standards Strength |
English PDF |
| GB/T 42539-2023 |
Rolling bearings - Ceramic balls for bearings - Determination of Strength (notched ball test) {译} 滚动轴承 轴承用陶瓷球 强度测定（缺口球试验） |
China National Standards Strength |
English PDF |
| GB/T 1927.11-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive Strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第11部分：顺纹抗压强度测定 |
China National Standards Strength |
English PDF |
| GB/T 1927.16-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 16: Determination of shear Strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第16部分：顺纹抗剪强度测定 |
China National Standards Strength |
English PDF |
| GB/T 41650-2022 |
Furniture beds - Test methods for stability, Strength and durability {译} 家具 床 稳定性、强度和耐久性测试方法 |
China National Standards Strength |
English PDF |
| GB/T 20564.6-2022 |
High-Strength cold-rolled steel sheets and strips for automobiles—Part 6: Transformation-induced plasticity steels {译} 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.5-2022 |
High-Strength cold-rolled steel sheets and strips for automobiles - Part 5: Isotropic steels {译} 汽车用高强度冷连轧钢板及钢带 第5部分：各向同性钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.4-2022 |
High-Strength cold-rolled steel sheets and strips for automobiles - Part 4: Low-alloy high-strength steels {译} 汽车用高强度冷连轧钢板及钢带 第4部分：低合金高强度钢 |
China National Standards Strength |
English PDF |
| GB/T 1927.15-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile Strength across grains {译} 无疵小试样木材物理力学性质试验方法 第15部分：横纹抗拉强度测定 |
China National Standards Strength |
English PDF |
| GB/T 41511-2022 |
Test method for peel Strength of coated abrasives {译} 涂附磨具剥离强度测试方法 |
China National Standards Strength |
English PDF |
| GB/T 41606-2022 |
Barium titanate-based thermosensitive ceramics with high electric Strength and low resistivity {译} 钛酸钡基高抗电强度低电阻率热敏陶瓷 |
China National Standards Strength |
English PDF |
| GB/T 41558-2022 |
Method of test for tuft length Strength {译} 毛丛长度强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 16508.3-2022 |
Shell boilers Part 3: Design and Strength calculations {译} 锅壳锅炉 第3部分：设计与强度计算 |
China National Standards Strength |
English PDF |
| GB/T 1927.14-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 14: Determination of tensile Strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第14部分：顺纹抗拉强度测定 |
China National Standards Strength |
English PDF |
| GB/T 20887.5-2022 |
High Strength hot rolled steel sheet and strip for automobile part 5: martensitic steel {译} 汽车用高强度热连轧钢板及钢带 第5部分:马氏体钢 |
China National Standards Strength |
English PDF |
| GB/T 20887.4-2022 |
High Strength hot rolled steel sheet and strip for automobile part 4: transformation induced plastic steel {译} 汽车用高强度热连轧钢板及钢带 第4部分:相变诱导塑性钢 |
China National Standards Strength |
English PDF |
| GB/T 20887.3-2022 |
High Strength hot rolled steel sheet and strip for automobile part 3: dual phase steel {译} 汽车用高强度热连轧钢板及钢带 第3部分：双相钢 |
China National Standards Strength |
English PDF |
| GB/T 20887.2-2022 |
High Strength hot rolled steel sheet and strip for automobile part 2: high reaming steel {译} 汽车用高强度热连轧钢板及钢带 第2部分：高扩孔钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.7-2022 |
High Strength tandem cold rolled steel sheet and strip for automobile part 7: martensitic steel {译} 汽车用高强度冷连轧钢板及钢带 第7部分：马氏体钢 |
China National Standards Strength |
English PDF |
| GB/T 18743.2-2022 |
Thermoplastics pipes - Determination of impact Strength of simply supported beams - Part 2: test conditions for pipes of different materials {译} 热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件 |
China National Standards Strength |
English PDF |
| GB/T 18743.1-2022 |
Thermoplastics pipes - Determination of impact Strength of simply supported beams - Part 1: General test methods {译} 热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法 |
China National Standards Strength |
English PDF |
| GB/T 1457-2022 |
Test method for drum peel Strength of sandwich structures {译} 夹层结构滚筒剥离强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 41501-2022 |
Determination of interlaminar shear Strength and modulus of fiber reinforced plastic composites by double beam method {译} 纤维增强塑料复合材料 双梁法测定层间剪切强度和模量 |
China National Standards Strength |
English PDF |
| GB/T 11106-2022 |
Metallic powder—Determination of green Strength by compression of cylinder compacts 金属粉末 用圆柱形压坯的压缩测定压坯强度的方法 |
China National Standards Strength |
English PDF |
| GB/T 22459.4-2022 |
Refractory mortars—Part 4: Determination of flexural bonding Strength 耐火泥浆 第4部分：常温抗折粘接强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 16507.4-2022 |
Water-tube boilers—Part 4: Strength calculation of pressure parts 水管锅炉 第4部分：受压元件强度计算 |
China National Standards Strength |
English PDF |
| GB/T 4966-2022 |
Determination method of tensile Strength of ceramic materials for daily use {译} 日用陶瓷材料抗张强度测定方法 |
China National Standards Strength |
English PDF |
| GB/T 24186-2022 |
High-Strength wear-resistant steel plates and strips for construction machinery {译} 工程机械用高强度耐磨钢板和钢带 |
China National Standards Strength |
English PDF |
| GB/T 42125.10-2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 10: Particular requirements for insulation resistance measurement and dielectric Strength test equipment {译} 测量、控制和实验室用电气设备的安全要求 第10部分：绝缘电阻测量和介电强度试验设备的特殊要求 |
China National Standards Strength |
English PDF |
| GB/T 28905-2022 |
Low Yield Strength Steel Plates for Construction {译} 建筑用低屈服强度钢板 |
China National Standards Strength |
English PDF |
| GB/T 3903.32-2022 |
Footwear - Test methods for insoles - Seam tear Strength {译} 鞋类 内底试验方法 缝合撕破力 |
China National Standards Strength |
English PDF |
| GB/T 3903.29-2022 |
Footwear - Test methods for outsoles - Split tear Strength and interlaminar peel strength {译} 鞋类 外底试验方法 剖层撕裂强度和层间剥离强度 |
China National Standards Strength |
English PDF |
| GB/T 3903.8-2022 |
Footwear - Test methods for insoles - Peel Strength between layers {译} 鞋类 内底试验方法 层间剥离强度 |
China National Standards Strength |
English PDF |
| GB/T 41762.2-2022 |
Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, Strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests {译} 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分：弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 |
China National Standards Strength |
English PDF |
| GB/T 21396-2022 |
Footwear - Test methods for finished shoes - Adhesive Strength of upper and sole {译} 鞋类 成鞋试验方法 帮底粘合强度 |
China National Standards Strength |
English PDF |
| GB/T 41747-2022 |
Structural-grade and high-Strength continuous hot-dip galvanized twin-roll cast-rolled steel sheet and strip {译} 结构级和高强度连续热镀锌双辊铸轧薄钢板及钢带 |
China National Standards Strength |
English PDF |
| GB/T 41852-2022 |
Semiconductor devices; microelectromechanical devices; bending and shearing test methods for bonding Strength of MEMS structures {译} 半导体器件 微机电器件 MEMS结构黏结强度的弯曲和剪切试验方法 |
China National Standards Strength |
English PDF |
| GB/T 41853-2022 |
Semiconductor devices MEMS devices Wafer-to-wafer bond Strength measurement {译} 半导体器件 微机电器件 晶圆间键合强度测量 |
China National Standards Strength |
English PDF |
| GB/T 40388-2021 |
Test method for shear Strength of C/C composites 碳/碳复合材料剪切强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 40341-2021 |
High Strength and toughness alloy structure steel bars for deep sea oil field drilling and exploiting 深海油田钻采用高强韧合金结构钢棒 |
China National Standards Strength |
English PDF |
| GB/T 40321-2021 |
High Strength and toughness Al-Zn-Mg-Cu series aluminium alloy plate 高强高韧型Al-Zn-Mg-Cu系铝合金板材 |
China National Standards Strength |
English PDF |
| GB/T 40316-2021 |
Welded high Strength shaped and round steel tubes for automobile structure 汽车结构用高强度异型及圆形焊接钢管 |
China National Standards Strength |
English PDF |
| GB/T 40282-2021 |
Hot-rolled twin roll cast steel sheets and strips of structural quality and high Strength steel 结构级和高强度双辊铸轧热轧薄钢板及钢带 |
China National Standards Strength |
English PDF |
| GB/T 15972.31-2021 |
Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile Strength 光纤试验方法规范 第31部分：机械性能的测量方法和试验程序 抗张强度 |
China National Standards Strength |
English PDF |
| GB/T 6328-2021 |
Test method for shear impact Strength of adhesive bonds 胶粘剂剪切冲击强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 3074.1-2021 |
The test method for flexural Strength of carbon materials 炭素材料抗折强度测定方法 |
China National Standards Strength |
English PDF |
| GB/T 40186-2021 |
Determination of genetic material damage Strength for microbial mutation breeding—Umu method 微生物诱变育种致遗传物质损伤强度测定 Umu法 |
China National Standards Strength |
English PDF |
| GB/T 40005-2021 |
Weibull statistics for Strength data of fine ceramics 精细陶瓷强度数据的韦布尔统计分析方法 |
China National Standards Strength |
English PDF |
| GB/T 14230-2021 |
Test method of tooth bending Strength for gear load capacity 齿轮弯曲疲劳强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 14229-2021 |
Test method of surface contact Strength for gear load capacity 齿轮接触疲劳强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 3480.5-2021 |
Calculation of load capacity of spur and helical gears—Part 5:Strength and quality of materials 直齿轮和斜齿轮承载能力计算 第5部分：材料的强度和质量 |
China National Standards Strength |
English PDF |
| GB/T 40073-2021 |
External pressure Strength test procedure for metal pressure hull of submersibles 潜水器金属耐压壳外压强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 40072-2021 |
Strength test method for submersible metallic framework 潜水器金属框架强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 40064-2021 |
External pressure Strength test procedure for metal pressure hull of submersibles 节能技术评价导则 |
China National Standards Strength |
English PDF |
| GB/T 3480.3-2021 |
Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth bending Strength 直齿轮和斜齿轮承载能力计算 第3部分：轮齿弯曲强度计算 |
China National Standards Strength |
English PDF |
| GB/T 39826-2021 |
Fine ceramics—Determining flexural bond Strength—Four-point bending method 精细陶瓷 界面弯曲强度测定 四点弯曲法 |
China National Standards Strength |
English PDF |
| GB/T 39824-2021 |
Determination of relative Strength of dyes in solution 溶液中染料相对强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 39814-2021 |
Test method for impact Strength of ultrathin glass—Ball drop method 超薄玻璃抗冲击强度试验方法 落球冲击法 |
China National Standards Strength |
English PDF |
| GB/T 1927.20-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage Strength 无疵小试样木材物理力学性质试验方法 第20部分：抗劈力测定 |
China National Standards Strength |
English PDF |
| GB/T 1927.17-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending Strength 无疵小试样木材物理力学性质试验方法 第17部分：冲击韧性测定 |
China National Standards Strength |
English PDF |
| GB/T 1927.12-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of Strength in compression perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定 |
China National Standards Strength |
English PDF |
| GB/T 1927.9-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending Strength 无疵小试样木材物理力学性质试验方法 第9部分：抗弯强度测定 |
China National Standards Strength |
English PDF |
| GB/T 17671-2021 |
Test method of cement mortar Strength (ISO method) 水泥胶砂强度检验方法(ISO法) |
China National Standards Strength |
English PDF |
| GB/T 21421.1-2021 |
Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V—Part 1：Standard Strength classes and end fittings 标称电压高于1 000V的架空线路用复合绝缘子串元件 第1部分：标准强度等级和端部装配件 |
China National Standards Strength |
English PDF |
| GB/T 41170.2-2021 |
Skin barrier for ostomy aids -- Test methods -- Part 2: Wet integrity and adhesive Strength 造口辅助器具的皮肤保护用品 试验方法 第2部分：耐湿完整性和黏合强度 |
China National Standards Strength |
English PDF |
| GB/T 40937-2021 |
Plastic piping systems—Determination of long-term Strength for plastic composite pipes and fittings 塑料管道系统 塑料复合管材和管件长期强度的测定方法 |
China National Standards Strength |
English PDF |
| GB/T 40916-2021 |
High Strength polyurethane foam for storage and transport of liquefied gas 液化气储运用高强度聚氨酯泡沫塑料 |
China National Standards Strength |
English PDF |
| GB/T 3903.14-2021 |
Footwear—Test methods for outsoles—Needle tear Strength 鞋类 外底试验方法 针撕破强度 |
China National Standards Strength |
English PDF |
| GB/T 3903.12-2021 |
Footwear—Test methods for outsoles—Tear Strength 鞋类 外底试验方法 撕裂强度 |
China National Standards Strength |
English PDF |
| GB/T 3903.9-2021 |
Footwear—Test methods for insoles—Heel pin holding Strength 鞋类 内底试验方法 跟部持钉力 |
China National Standards Strength |
English PDF |
| GB/T 39153-2020 |
Metastable decomposition Strengthened Cu-Ni-Sn alloy rod 亚稳分解强化铜-镍-锡合金棒材 |
China National Standards Strength |
English PDF |
| GB/T 39056-2020 |
Technical code for maintenance and Strengthening of masonry structures on ancient buildings 古建筑砖石结构维修与加固技术规范 |
China National Standards Strength |
English PDF |
| GB/T 454-2020 |
Paper—Determination of bursting Strength 纸 耐破度的测定 |
China National Standards Strength |
English PDF |
| GB/T 24328.3-2020 |
Tissue paper and tissue products—Part 3: Determination of tensile Strength, stretch at maximum force and tensile energy absorption 卫生纸及其制品 第3部分: 抗张强度、最大力值时伸长率和抗张能量吸收的测定 |
China National Standards Strength |
English PDF |
| GB/T 24328.4-2020 |
Tissue paper and tissue products--Part 4: Determination of wet tensile Strength 卫生纸及其制品 第4部分: 湿抗张强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 24328.7-2020 |
Tisue paper and tissue products—Part 7: Determination of ball burst Strength 卫生纸及其制品 第7部分：球形耐破度的测定 |
China National Standards Strength |
English PDF |
| GB/T 24328.10-2020 |
Tissue paper and tissue products—Part 10: Determination of tensile Strength of perforated lines and calculation of perforation efficiency 卫生纸及其制品 第10部分：打孔线抗张强度的测定及打孔效率的计算 |
China National Standards Strength |
English PDF |
| GB/T 24328.9-2020 |
Tissue paper and tissue products—Part 9: Determination of wet ball burst Strength 卫生纸及其制品 第9部分：湿球形耐破度的测定 |
China National Standards Strength |
English PDF |
| GB/T 38959-2020 |
Power spinning of high-Strength steel—Technological specification 高强度钢强力旋压 工艺规范 |
China National Standards Strength |
English PDF |
| GB/T 39027-2020 |
High Strength and modulus polyimide filament yarns 高强高模聚酰亚胺长丝 |
China National Standards Strength |
English PDF |
| GB/T 39039-2020 |
Evaluation method for hydrogen-induced delayed fracture of high Strength steels 高强度钢氢致延迟断裂评价方法 |
China National Standards Strength |
English PDF |
| GB/T 39542.3-2020 |
Mechanical pencils for technical drawings—Part 3: Black leads—Bending Strengths of HB leads 技术制图活动铅笔 第3部分：黑铅芯 HB铅芯弯曲强度 |
China National Standards Strength |
English PDF |
| GB/T 38938-2020 |
High Strength and low expansion alloy 高强度低膨胀合金 |
China National Standards Strength |
English PDF |
| GB/T 38898-2020 |
Non-destructive testing—Testing method for measuring coating bond Strength using ultrasonic wave 无损检测 涂层结合强度超声检测方法 |
China National Standards Strength |
English PDF |
| GB/T 38809-2020 |
General specification for low alloy ultra-high Strength steels 低合金超高强度钢通用技术条件 |
China National Standards Strength |
English PDF |
| GB/T 38715-2020 |
High Strength magnesium alloy bars 高强度镁合金棒材 |
China National Standards Strength |
English PDF |
| GB/T 38611-2020 |
Office furniture—Office work chairs—Test methods for the determination of stability, Strength and durability 办公家具 办公工作椅 稳定性、强度和耐久性测试方法 |
China National Standards Strength |
English PDF |
| GB/T 38607-2020 |
Office furniture—Tables and desks—Test methods for the determination of stability, Strength and durability 办公家具 桌台类 稳定性、强度和耐久性测试方法 |
China National Standards Strength |
English PDF |
| GB/T 9966.7-2020 |
Test methods for natural stone--Part 7: Determination of Strength for individual stone anchorages 天然石材试验方法 第7部分：石材挂件组合单元挂装强度试验 |
China National Standards Strength |
English PDF |
| GB/T 9966.2-2020 |
Test methods for natural stone--Part 2: Determination of dry, wet and after freezing flexural Strength 天然石材试验方法 第2部分：干燥、水饱和、冻融循环后弯曲强度试验 |
China National Standards Strength |
English PDF |
| GB/T 9966.1-2020 |
Test methods for natural stone--Part 1: Determination of dry, wet and after freezing compressive Strength 天然石材试验方法 第1部分：干燥、水饱和、冻融循环后压缩强度试验 |
China National Standards Strength |
English PDF |
| GB/T 50165-2020 |
Technical standard for maintenance and Strength ening of ancient timber buildings 古建筑木结构维护与加固技术标准 |
China National Standards Strength |
English PDF |
| GB/T 39686-2020 |
Test method for determining elastic modulus and Strength of thick ceramic coatings 陶瓷厚涂层的弹性模量与强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 39685-2020 |
Test method for determining bonding Strength of ceramic coatings 陶瓷覆层结合强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 17044-2020 |
Steel cord conveyor belts—Adhesion Strength test of the cover to the core layer 钢丝绳芯输送带 覆盖层与带芯层粘合强度试验 |
China National Standards Strength |
English PDF |
| GB/T 2379-2020 |
Acid complex dyes—Determination of shade and relative Strength 酸性络合染料 色光和强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 39281-2020 |
Wire electrodes,wires,rods and deposits for gas shielded arc welding of high Strength steels 气体保护电弧焊用高强钢实心焊丝 |
China National Standards Strength |
English PDF |
| GB/T 18252-2020 |
Plastics piping and ducting systems — Determination of the long-term hydrostatic Strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 |
China National Standards Strength |
English PDF |
| GB/T 13217.1-2020 |
Test method for colour and tinctorial Strength of ink 油墨颜色和着色力检验方法 |
China National Standards Strength |
English PDF |
| GB/T 39422-2020 |
Determination methods of characteristic values for dowel-bearing Strength and withdrawal capacity of nails and screws in timber structure 木结构销槽承压强度及钉连接承载力特征值确定方法 |
China National Standards Strength |
English PDF |
| GB/T 39421-2020 |
Methods for determining the static gel Strength of cement formulations 水泥浆静胶凝强度测定方法 |
China National Standards Strength |
English PDF |
| GB/T 39487-2020 |
Test method of tube shear Strength for structural foaming adhesives 发泡结构胶粘剂管剪强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 39289-2020 |
Determination of the adhesion Strength—Plastic and metal 胶粘剂粘接强度的测定 金属与塑料 |
China National Standards Strength |
English PDF |
| GB/T 39163-2020 |
Test methods of the bonding Strength for target-backing plate assemblies 靶材与背板结合强度测试方法 |
China National Standards Strength |
English PDF |
| GB/T 38277-2019 |
Brittle crack arrest high Strength steel plate for ship 船用高强度止裂钢板 |
China National Standards Strength |
English PDF |
| GB/T 38359-2019 |
Data-analysis methods of Strength properties for structural wood and wood-based products 结构用木质材料强度性能数据分析方法 |
China National Standards Strength |
English PDF |
| GB/T 38277-2019 |
Brittle crack arrest high Strength steel plate for ship 船用高强度止裂钢板 |
China National Standards Strength |
English PDF |
| GB 15083-2019 |
Strength requirement and test method of automobile seats,their anchorages and any head restraints 汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
China National Standards Strength |
English PDF |
| GB 15083-2019 |
Strength requirement and test method of automobile seats,their anchorages and any head restraints 汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
China National Standards Strength |
English PDF |
| GB/T 1431-2019 |
The test method for compressive Strength of carbon materials 炭素材料耐压强度测定方法 |
China National Standards Strength |
English PDF |
| GB/T 37794-2019 |
Carbon fibre—Determination of knot Strength 碳纤维 结节拉伸强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 37782-2019 |
Metallic materials—Indentation test—Determination of Strength, hardness and stress-strain curve 金属材料 压入试验 强度、硬度和应力-应变曲线的测定 |
China National Standards Strength |
English PDF |
| GB/T 37781-2019 |
Test methods for bending Strength of glass 玻璃材料弯曲强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 3903.43-2019 |
Footwear—Test methods for uppers，lining and insocks—Seam Strength 鞋类 帮面、衬里和内垫试验方法 缝合强度 |
China National Standards Strength |
English PDF |
| GB/T 38440-2019 |
Test method for penetration Strength of cast iron 铸铁楔压强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 8721-2019 |
The test method for tensile Strength of carbon materials 炭素材料抗拉强度测定方法 |
China National Standards Strength |
English PDF |
| GB/T 1431-2019 |
The test method for compressive Strength of carbon materials 炭素材料耐压强度测定方法 |
China National Standards Strength |
English PDF |
| GB/T 37430-2019 |
High Strength stainless structural steel for constructions 建筑结构用高强不锈钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.12-2019 |
Continuously cold rolled high Strength steel sheet and strip for automobile—Part 12:Dual phase steel with high formability 汽车用高强度冷连轧钢板及钢带 第12部分：增强成形性双相钢 |
China National Standards Strength |
English PDF |
| GB/T 37543-2019 |
：Measurement method for total electric field Strength and ion current density of DC transmission line and converter station
直流输电线路和换流站的合成场强与离子流密度的测量方法 |
China National Standards Strength |
English PDF |
| GB/T 6525-2019 |
Determination of compression Strength for sintered metal materials at room temperature 烧结金属材料室温压缩强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 32076.10-2018 |
High-Strength structural bolting assemblies for preloading—Part 10：Assembly specifications 预载荷高强度栓接结构连接副-第10部分：安装技术条件 |
China National Standards Strength |
English PDF |
| GB/T 36961-2018 |
Hot stamping process for ultra-high Strength steel—General specification 超高强钢热冲压工艺-通用技术 |
China National Standards Strength |
English PDF |
| GB/T 36233-2018 |
Tubular cored electrodes for high-Strength steels 高强钢药芯焊丝 |
China National Standards Strength |
English PDF |
| GB/T 36148.2-2018 |
Ships and marine technology—Marine environment protection—Oil booms—Part 2: Strength and performance requirements 船舶与海上技术 海上环境保护 围油栏 第2部分：强度和性能要求 |
China National Standards Strength |
English PDF |
| GB/T 35100-2018 |
Fiber metal laminates—Determination of interlaminar shear Strength by short-beam method 纤维金属层板 短梁法测定层间剪切强度 |
China National Standards Strength |
English PDF |
| GB/T 36264-2018 |
Test method for tensile Strength of fiber composites under ultrahigh temperature and oxidizing environment 超高温氧化环境下纤维复合材料拉伸强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 1591-2018 |
High Strength low alloy structural steels 低合金高强度结构钢 |
China National Standards Strength |
English PDF |
| GB/T 36171-2018 |
High Strength structural steel plate in the quenched and tempered condition with improved formability 改善成形性高强度结构用调质钢板 |
China National Standards Strength |
English PDF |
| GB/T 18365-2018 |
Hot-extruded PE protection paralleled high Strength wire cable for cable-stayed bridge 斜拉桥用热挤聚乙烯高强钢丝拉索 |
China National Standards Strength |
English PDF |
| GB/T 36509-2018 |
Requirements and testing methods of structure Strength for paraglider 滑翔伞结构强度要求及测试方法 |
China National Standards Strength |
English PDF |
| GB/T 4937.22-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 22: Bond Strength 半导体器件 机械和气候试验方法 第22部分：键合强度 |
China National Standards Strength |
English PDF |
| GB/T 36877-2018 |
Determination of impact peel Strength of structural adhesives — Wedge method 结构胶粘剂冲击剥离强度的测定 楔形物法 |
China National Standards Strength |
English PDF |
| GB/T 4937.19-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 19: Die shear Strength 半导体器件 机械和气候试验方法 第19部分：芯片剪切强度 |
China National Standards Strength |
English PDF |
| GB/T 1452-2018 |
Test method for flatwise tension Strength of sandwich constructions 夹层结构平拉强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 35841-2018 |
High Strength steel plate for dump truck structure 自卸矿车结构用高强度钢板 |
China National Standards Strength |
English PDF |
| GB/T 36026-2018 |
High-Strength corrosion-resistant alloy bars for oil and gas engineering 油气工程用高强度耐蚀合金棒 |
China National Standards Strength |
English PDF |
| GB/T 36034-2018 |
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of high Strength steels 埋弧焊用高强钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards Strength |
English PDF |
| GB/T 17737.308-2018 |
Coaxial communication cables—Part 1-308: Mechanical test methods—Test for tensile Strength and elongation for copper-clad metals 同轴通信电缆 第1-308部分：机械试验方法 铜包金属的抗拉强度和延伸率试验 |
China National Standards Strength |
English PDF |
| GB/T 14201-2018 |
Iron ore pellets for blast furnace and direct reduction feedstocks—Determination of the crushing Strength 高炉和直接还原用铁球团矿 抗压强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 18442.7-2017 |
Static vacuum insulated cryogenic pressure vessels— Part 7：Rules of pressure Strengthening for inner vessels 固定式真空绝热深冷压力容器 第7部分：内容器应变强化技术规定 |
China National Standards Strength |
English PDF |
| GB/T 20027.2-2017 |
Rubber-or plastics-coated fabrics—Determination of bursting Strength—Part 2: Hydraulic method 橡胶或塑料涂覆织物 破裂强度的测定 第2部分：液压法 |
China National Standards Strength |
English PDF |
| GB/T 34520.7-2017 |
Test methods for continuous silicon carbide fiber—Part 7 ：High temperature Strength retention rate 连续碳化硅纤维测试方法 第7部分：高温强度保留率 |
China National Standards Strength |
English PDF |
| GB/T 34328-2017 |
Light weight thermally Strengthened glass 轻质物理强化玻璃 |
China National Standards Strength |
English PDF |
| GB/T 34560.4-2017 |
Structural steels—Part 4：Technical delivery conditions for high yield Strength quenched and tempered structural steel plates 结构钢 第4部分：淬火加回火高屈服强度结构钢板交货技术条件 |
China National Standards Strength |
English PDF |
| GB/T 4000-2017 |
Determination of coke reactivity index (CRI) and coke Strength after reaction (CSR) 焦炭反应性及反应后强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 32076.8-2017 |
High-Strength structural bolting assemblies for preloading—Part 8: Torshear type bolt with cup head,and nut assemblies 预载荷高强度栓接结构连接副 第8部分：扭剪型圆头螺栓和螺母连接副 |
China National Standards Strength |
English PDF |
| GB/T 5754.2-2017 |
Steel cord conveyor belts—Longitudinal traction test—Part 2: Measurement of tensile Strength 钢丝绳芯输送带 纵向拉伸试验 第2部分：拉伸强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 34444-2017 |
Paper and board—Determination of the layer peel Strength 纸和纸板 层间剥离强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 3690-2017 |
Textile conveyor belts—Full thickness tensile Strength,elongation at break and elongation at the reference load—Test method 织物芯输送带 全厚度拉伸强度、拉断伸长率和参考力伸长率 试验方法 |
China National Standards Strength |
English PDF |
| GB/T 34217-2017 |
Refractory products—Determination of torsion Strength at elevated temperature 耐火材料 高温抗扭强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 34219-2017 |
Refractory matericals—Determination of tensile Strength at room temperature 耐火材料 常温抗拉强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 20564.1-2017 |
Continuously cold rolled high Strength steel sheet and strip for automobile—Part 1: Bake hardening steel 汽车用高强度冷连轧钢板及钢带 第1部分：烘烤硬化钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.3-2017 |
Continuously cold rolled high Strength steel sheet and strip for automobile—Part 3: High strength interstitial free steel 汽车用高强度冷连轧钢板及钢带 第3部分: 高强度无间隙原子钢 |
China National Standards Strength |
English PDF |
| GB/T 20887.7-2017 |
Continuously hot rolled high Strength steel sheet and strip for automobile—Part 7：Steels for hydraulic forming 汽车用高强度热连轧钢板及钢带 第7部分：液压成形用钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.11-2017 |
Continuously cold rolled high Strength steel sheet and strip for automobile—Part 11：Carbon manganese steel 汽车用高强度冷连轧钢板及钢带 第11部分：碳锰钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.2-2017 |
Continuously cold rolled high Strength steel sheet and strip for automobile—Part 2: Dual phase steel 汽车用高强度冷连轧钢板及钢带 第2部分：双相钢 |
China National Standards Strength |
English PDF |
| GB/T 20887.6-2017 |
Continuously hot rolled high Strength steel sheet and strip for automobile—Part 6: Complex phase steel 汽车用高强度热连轧钢板及钢带 第6部分：复相钢 |
China National Standards Strength |
English PDF |
| GB/T 20564.10-2017 |
Continuously cold rolled high Strength steel sheet and strip for automobile—Part 10: Twinning induced plasticity steel 汽车用高强度冷连轧钢板及钢带 第10部分：孪晶诱导塑性钢 |
China National Standards Strength |
English PDF |
| GB/T 20887.1-2017 |
Continuously hot rolled high Strength steel sheet and strip for automobile—Part 1: High yield strength steel for cold forming 汽车用高强度热连轧钢板及钢带 第1部分：冷成形用高屈服强度钢 |
China National Standards Strength |
English PDF |
| GB/T 34218-2017 |
Refractory products—Determination of compressive Strength at elevated temperature 耐火材料 高温耐压强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 34220-2017 |
Refractory Products—Determination of tensile Strength at elevated temperature 耐火材料 高温抗拉强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 34228-2017 |
Dipped heat-resistant canvas―Test method for adhesion Strength at high temperature 耐热浸胶帆布 高温粘合性能试验方法 |
China National Standards Strength |
English PDF |
| GB/T 34254-2017 |
Test method for handle Strength and decoration resistance to chemical corrosion of domestic ceramic wares 日用陶瓷把手、装饰材料牢固度测试方法 |
China National Standards Strength |
English PDF |
| GB/T 33970-2017 |
Al2O3 dispersion Strengthened copper sheet for resistance welding electrode 电阻焊电极用Al2O3弥散强化铜片材 |
China National Standards Strength |
English PDF |
| GB/T 32076.9-2017 |
High-Strength structural bolting assemblies for preloading—Part 9: Torshear type bolt with hexagon head with large width across flats，and nut assemblies 预载荷高强度栓接结构连接副 第9部分：扭剪型大六角头螺栓和螺母连接副 |
China National Standards Strength |
English PDF |
| GB/T 33943-2017 |
High-Strength structural anchor bolting assemblies for steel structures 钢结构用高强度锚栓连接副 |
China National Standards Strength |
English PDF |
| GB/T 33835-2017 |
Test method of impact Strength for friction material 摩擦材料冲击强度试验方法 |
China National Standards Strength |
English PDF |
| GB/T 33788-2017 |
Reactive dyes—Determination of shade and relative Strength—Low salt dyeing method 反应染料 色光和强度的测定 低盐染色法 |
China National Standards Strength |
English PDF |
| GB/T 33799-2017 |
Determination of the bond Strength of adhesive in engineering-plastic joints 工程塑料用胶粘剂对接强度的测定 |
China National Standards Strength |
English PDF |
| GB/T 18387-2017 |
Limits and test method of magnetic and electric field Strength from eletric vehicles 电动车辆的电磁场发射强度的限值和测量方法 |
China National Standards Strength |
English PDF |
| GB/T 33628-2017 |
Wind turbine generator systems—Assembly requirements for high-Strength-bolted joint 风力发电机组 高强螺纹连接副安装技术要求 |
China National Standards Strength |
English PDF |
| GB/T 33641.2-2017 |
Tractors and machinery for agriculture and forestry—Seat belts—Part 2：Anchorage Strength requirements 农林拖拉机和机械 安全带 第2部分：固定装置强度要求 |
China National Standards Strength |
English PDF |
| GB/T 18736-2017 |
Mineral admixtures for high Strength and high performance concrete 高强高性能混凝土用矿物外加剂 |
China National Standards Strength |
English PDF |
| GB/T 33026-2017 |
High Strength steel wire strand for building structures 建筑结构用高强度钢绞线 |
China National Standards Strength |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
