Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 45981.3-2025 |
Large Castings and Forgings for Heavy-Duty Gas Turbines - Part 3: Steel Castings {译} 重型燃气轮机用大型铸锻件-第3部分：铸钢件 |
China National Standards bin |
 English PDF |
| GB/T 45981.2-2025 |
Large Castings and Forgings for Heavy-Duty Gas Turbines - Part 2: High-Temperature Alloy Die Forgings {译} 重型燃气轮机用大型铸锻件-第2部分：高温合金模锻件 |
China National Standards bin |
English PDF |
| GB/T 45855-2025 |
Wind Power Generation Systems - Technical Specifications for Life Cycle Environmental Assessment of Wind Turbines {译} 风能发电系统-风力发电机组生命周期环境评价技术规范 |
China National Standards bin |
English PDF |
| GB/T 45854-2025 |
Wind Power Generation Systems - Wind Turbine Hydraulic Systems {译} 风能发电系统-风力发电机组液压系统 |
China National Standards bin |
English PDF |
| GB/T 45852-2025 |
Gas Turbine Exhaust Systems {译} 燃气轮机排气系统 |
China National Standards bin |
English PDF |
| GB/T 43683.3-2025 |
Hydrogenerator unit installation procedures and public Differential Guidelines - Part 3: Vertical Francis Turbine or Pump-Turbine {译} 水轮发电机组安装程序与公差导则-第3部分：立式混流式水轮机或水泵水轮机 |
China National Standards bin |
English PDF |
| GB/T 34204-2025 |
Coiled tubing {译} 连续油管 |
China National Standards bin |
English PDF |
| GB/T 33346-2025 |
Conductor Rails for Wind Turbines (Dense Busbar Ducts) {译} 风力发电导电轨（密集型母线槽） |
China National Standards bin |
English PDF |
| GB/T 33154-2025 |
Yaw and Pitch Bearing Rubber Seals for Wind Turbines {译} 风力发电机偏航轴承及变桨轴承橡胶密封圈 |
China National Standards bin |
English PDF |
| GB/T 32821-2025 |
Gas Turbine Applications - Safety {译} 燃气轮机应用-安全 |
China National Standards bin |
English PDF |
| GB/T 2423.66-2025 |
Environmental Testing - Part 2: Test Methods - Test: Temperature/Humidity/Static Load Combination {译} 环境试验-第2部分：试验方法-试验：温度/湿度/静负载综合 |
China National Standards bin |
English PDF |
| GB 16670-2025 |
Cabinet-Type Gas Fire Extinguishing Devices {译} 柜式气体灭火装置 |
China National Standards bin |
English PDF |
| GB/T 33632-2025 |
General Technical Requirements for Installation of Aviation-Derived Gas Turbine Complete Plants {译} 航空派生型燃气轮机成套设备安装通用技术要求 |
China National Standards bin |
English PDF |
| GB/T 33627-2025 |
General Technical Requirements for Aviation-Derived Gas Turbine Packages {译} 航空派生型燃气轮机机组箱装体通用技术要求 |
China National Standards bin |
English PDF |
| GB/T 14099.7-2025 |
Gas Turbines - Procurement - Part 7: Technical Information {译} 燃气轮机-采购-第7部分：技术信息 |
China National Standards bin |
English PDF |
| GB/T 30658-2025 |
Prosthetics and Orthotics - Factors Considered in Prescribing Lower Limb Prostheses {译} 假肢和矫形器-开具下肢假肢处方考虑的因素 |
China National Standards bin |
English PDF |
| GB/T 31293-2025 |
Vacuum-Infused Epoxy Resins for Wind Turbine Blades {译} 风电叶片用真空导入环氧树脂 |
China National Standards bin |
English PDF |
| GB/T 18266.4-2025 |
Classification of sports venues - Part 4: Natural rock climbing sites {译} 体育场所等级的划分-第4部分:自然攀岩场地 |
China National Standards bin |
English PDF |
| GB/T 25383-2025 |
Wind Power Generation System - Wind Turbine Blades {译} 风能发电系统-风力发电机组风轮叶片 |
China National Standards bin |
English PDF |
| GB/T 33208-2025 |
Equipment Structural Health Monitoring - Online Monitoring Method for Turbine Blade Vibration Based on the Tip Timing Principle {译} 设备结构健康监测-基于叶尖定时原理的透平叶片振动在线监测方法 |
China National Standards bin |
English PDF |
| GB/T 8097-2025 |
Harvesting machinery - Combine harvesters - Test procedures and performance evaluation {译} 收获机械-联合收割机-测试程序和性能评价 |
China National Standards bin |
English PDF |
| GB/T 45655-2025 |
General Narrow Modular Electrical Cabinets {译} 通用窄尺寸模数化电气机柜 |
China National Standards bin |
English PDF |
| GB/T 32077-2025 |
Wind Power Generation Systems - Wind Turbine Pitch Systems {译} 风能发电系统-风力发电机组变桨距系统 |
China National Standards bin |
English PDF |
| GB/T 28559-2025 |
Supercritical and Ultra-Supercritical Steam Turbines - Blades {译} 超临界及超超临界汽轮机-叶片 |
China National Standards bin |
English PDF |
| GB/T 28572-2025 |
Specifications for Inlet Valves for Large and Medium-Sized Hydraulic Turbines and Technical Parameters {译} 大中型水轮机进水阀门规格及技术参数 |
China National Standards bin |
English PDF |
| GB/T 14478-2025 |
Basic Technical Specifications for Inlet Valves for Large and Medium-Sized Hydraulic Turbines {译} 大中型水轮机进水阀门基本技术规范 |
China National Standards bin |
English PDF |
| GB/T 19212.5-2025 |
Safety of transformers, reactors, power supply units, and their combinations Part 5: Special Requirements and Tests for General-Purpose Isolation Transformers and Power Supply Units Incorporating Isolation Transformers {译} 变压器、电抗器、电源装置及其组合的安全-第5部分：一般用途隔离变压器和内装隔离变压器的电源装置的特殊要求和试验 |
China National Standards bin |
English PDF |
| GB/T 45372-2025 |
Determination of Coal-Based Liquid-Phase Phenolic Compounds - Comprehensive Two-Dimensional Gas Chromatography Mass spectrometry/hydrogen flame ionization detector combination {译} 煤基液相酚类化合物的测定-全二维气相色谱-质谱/氢火焰离子化检测器联用 |
China National Standards bin |
English PDF |
| GB 45247-2025 |
Energy Consumption Limits per Unit for Gas-Steam Combined Cycle Generator Sets {译} 燃气-蒸汽联合循环发电机组单位产品能源消耗限额 |
China National Standards bin |
English PDF |
| GB/T 45195-2024 |
Wind power generation systems-Methods for recycling waste fiber composite materials from wind turbines {译} 风能发电系统-风力发电机组废弃纤维复合材料回收方法 |
China National Standards bin |
English PDF |
| GB/T 44808.2-2024 |
Ergonomics-barrier-free design-Part 2: Considering color Color combination method for color vision changes with age {译} 人类工效学-无障碍设计-第2部分：考虑颜色视觉随年龄变化的颜色组合方法 |
China National Standards bin |
English PDF |
| GB/T 3920-2024 |
Textiles - Color fastness test - Color fastness to rubbing {译} 纺织品-色牢度试验-耐摩擦色牢度 |
China National Standards bin |
English PDF |
| GB/T 45053-2024 |
Turbine compressor for ethylene unit {译} 乙烯装置用透平压缩机 |
China National Standards bin |
English PDF |
| GB/T 44986-2024 |
Turbine compressor for natural gas transmission unit {译} 天然气输送装置用透平压缩机 |
China National Standards bin |
English PDF |
| GB/T 45055-2024 |
Turbine compressor for large air separation unit {译} 大型空分装置用透平压缩机 |
China National Standards bin |
English PDF |
| GB/T 45006-2024 |
Fiber-reinforced composite pultruded sheets for wind turbine blades {译} 风电叶片用纤维增强复合材料拉挤板材 |
China National Standards bin |
English PDF |
| GB/T 21001.4-2024 |
Refrigerated Display Cabinets - Part 4: Classification, Requirements and Test Conditions for Ice Cream Freezers {译} 制冷陈列柜-第4部分：冰淇淋冷冻柜分类、要求和试验条件 |
China National Standards bin |
English PDF |
| GB/T 44782-2024 |
Space station containerless material experimental cabinet - Ground preparation specifications for experimental samples {译} 空间站无容器材料实验柜-实验样品地面制备规范 |
China National Standards bin |
English PDF |
| GB/Z 44528-2024 |
Wind power generation systems - Measurement and evaluation of electrical characteristics - Harmonic model and application of wind turbine generator sets {译} 风能发电系统-电气特性测量和评估-风力发电机组谐波模型及应用 |
China National Standards bin |
English PDF |
| GB/Z 44630-2024 |
Hydraulic machinery - Conversion of pressure pulsation of Francis turbines {译} 水力机械-混流式水轮机压力脉动换算 |
China National Standards bin |
English PDF |
| GB/T 44657-2024 |
Guidelines for regeneration and use of turbine oils {译} 涡轮机油再生与使用导则 |
China National Standards bin |
English PDF |
| GB/T 44508-2024 |
Wind power generation system-Technical specification for ring forgings of wind turbines {译} 风能发电系统-风力发电机组环形锻件技术规范 |
China National Standards bin |
English PDF |
| GB/T 44422-2024 |
Polyacrylic acid water-absorbing resins in urine absorption aids - Requirements {译} 尿吸收辅助器具中的聚丙烯酸吸水树脂-要求 |
China National Standards bin |
English PDF |
| GB/T 44403-2024 |
Optics and photonics - Telescopic systems - General terms and terms for binoculars, telescopes, observation mirrors and sighting telescopes {译} 光学和光子学-望远镜系统-通用术语和双筒望远镜、单筒望远镜、观测镜及瞄准望远镜术语 |
China National Standards bin |
English PDF |
| GB/T 2423.65-2024 |
Environmental testing - Part 2: Test methods - Test: salt spray/temperature/humidity/solar radiation combination {译} 环境试验-第2部分：试验方法-试验：盐雾/温度/湿度/太阳辐射综合 |
China National Standards bin |
English PDF |
| GB/T 2423.34-2024 |
Environmental testing - Part 2: Test methods - Test Z/AD: Temperature/humidity combined cycle test {译} 环境试验-第2部分：试验方法-试验Z/AD:温度/湿度组合循环试验 |
China National Standards bin |
English PDF |
| GB/T 7605-2024 |
In operation Determination of anti-emulsification property of turbine oil {译} 运行中涡轮机油抗乳化性的测定 |
China National Standards bin |
English PDF |
| GB/T 44428-2024 |
Determination of cannabidiol and tetrahydrocannabinol in cosmetics-liquid chromatography-tandem mass spectrometry {译} 化妆品中大麻二酚和四氢大麻酚的测定-液相色谱-串联质谱法 |
China National Standards bin |
English PDF |
| GB/T 22517.12-2024 |
Requirements and inspection methods for the use of sports venues - Part 12: Natural rock climbing venues {译} 体育场地使用要求及检验方法-第12部分：自然攀岩场地 |
China National Standards bin |
English PDF |
| GB/T 23423-2024 |
Aircraft main cabin container cargo loader {译} 飞机主舱集装货物装载机 |
China National Standards bin |
English PDF |
| GB/T 44461.2-2024 |
Intelligent networked vehicles - Technical requirements and test methods for combined driver assistance systems - Part 2: Multi-lane driving control {译} 智能网联汽车-组合驾驶辅助系统技术要求及试验方法-第2部分：多车道行驶控制 |
China National Standards bin |
English PDF |
| GB/T 44461.1-2024 |
Intelligent networked vehicles - Technical requirements and test methods for combined driver assistance systems - Part 1: Single lane driving control {译} 智能网联汽车-组合驾驶辅助系统技术要求及试验方法-第1部分：单车道行驶控制 |
China National Standards bin |
English PDF |
| GB/T 17988-2024 |
Performance requirements and test methods for tableware disinfection cabinets {译} 食具消毒柜性能要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 4706.31-2024 |
Safety of household and similar electrical appliances - Part 31: Particular requirements for sauna heating appliances and infrared cabins {译} 家用和类似用途电器的安全-第31部分：桑拿加热器具和红外线房的特殊要求 |
China National Standards bin |
English PDF |
| GB/T 4706.21-2024 |
Safety of household and similar electrical appliances - Part 21: Particular requirements for microwave ovens, including combination microwave ovens {译} 家用和类似用途电器的安全-第21部分：微波炉,包括组合型微波炉的特殊要求 |
China National Standards bin |
English PDF |
| GB/T 4706.112-2024 |
Safety of household and similar electrical appliances - Part 112: Particular requirements for tableware disinfection cabinets {译} 家用和类似用途电器的安全-第112部分：食具消毒柜的特殊要求 |
China National Standards bin |
English PDF |
| GB/Z 44047-2024 |
Floating offshore wind turbines-Design requirements {译} 漂浮式海上风力发电机组-设计要求 |
China National Standards bin |
English PDF |
| GB/T 35717-2024 |
Measurement of flow rates of turbines, storage pumps and pump-turbines-Ultrasonic propagation time method {译} 水轮机、蓄能泵和水泵水轮机流量的测量-超声传播时间法 |
China National Standards bin |
English PDF |
| GB/T 22581-2024 |
Basic technical conditions for mixed flow pump-turbines {译} 混流式水泵水轮机基本技术条件 |
China National Standards bin |
English PDF |
| GB/T 44026-2024 |
Technical specifications for prefabricated cabin lithium-ion battery energy storage systems {译} 预制舱式锂离子电池储能系统技术规范 |
China National Standards bin |
English PDF |
| GB/Z 44048-2024 |
Wind power generation system-numerical field calibration method for power performance test of wind turbines {译} 风能发电系统-风力发电机组功率性能测试的数值场标定方法 |
China National Standards bin |
English PDF |
| GB/T 5578-2024 |
Specifications for steam turbines for stationary power generation {译} 固定式发电用汽轮机规范 |
China National Standards bin |
English PDF |
| GB/T 44090-2024 |
Mountain climbing fitness trail configuration requirements {译} 登山健身步道配置要求 |
China National Standards bin |
English PDF |
| GB/T 19960-2024 |
Wind power generation system - General technical conditions and test methods for wind turbines {译} 风能发电系统-风力发电机组通用技术条件和试验方法 |
China National Standards bin |
English PDF |
| GB/T 20790-2024 |
Semi-feed combine harvesters - Technical conditions {译} 半喂入联合收割机-技术条件 |
China National Standards bin |
English PDF |
| GB/T 25390-2024 |
Wind power generation system - Ductile iron castings for wind turbines {译} 风能发电系统-风力发电机组球墨铸铁件 |
China National Standards bin |
English PDF |
| GB/T 33423-2024 |
Technical specifications for corrosion control of coastal and offshore wind turbines {译} 沿海及海上风电机组腐蚀控制技术规范 |
China National Standards bin |
English PDF |
| GB/T 43904-2024 |
Wind power generation system - Wind turbine operation evaluation index system {译} 风能发电系统-风力发电机组运行评价指标体系 |
China National Standards bin |
English PDF |
| GB/T 43945-2024 |
Ship cabin noise prediction based on statistical energy analysis {译} 基于统计能量分析的船舶舱室噪声预报 |
China National Standards bin |
English PDF |
| GB/T 43966-2024 |
General rules for high performance liquid chromatography - quadrupole inductively coupled plasma mass spectrometry combined method {译} 高效液相色谱-四极杆电感耦合等离子体质谱联用法通则 |
China National Standards bin |
English PDF |
| GB/T 43968-2024 |
General rules for high performance liquid chromatography - atomic fluorescence spectrometer combined analysis methods {译} 高效液相色谱-原子荧光光谱仪联用分析方法通则 |
China National Standards bin |
English PDF |
| GB/T 754-2024 |
Parameter Series for Steam Turbines for Power Generation {译} 发电用汽轮机参数系列 |
China National Standards bin |
English PDF |
| GB/T 25138-2024 |
Standard silica sand for calibration of casting binders {译} 检定铸造粘结剂用标准硅砂 |
China National Standards bin |
English PDF |
| GB/T 43685-2024 |
General technical requirements for inflatable membrane structure cabins and controlled environments {译} 充气膜结构舱室及受控环境通用技术要求 |
China National Standards bin |
English PDF |
| GB/T 43767.2-2024 |
Shipboard shore power receiving equipment - Part 2: High voltage shore power box (cabinet) {译} 船载岸电受电设备-第2部分：高压岸电箱（柜） |
China National Standards bin |
English PDF |
| GB/T 43595-2023 |
Guidelines for start-up testing and commissioning of hydraulic turbines, water pump turbines and energy storage pumps {译} 水轮机、水泵水轮机和蓄能泵启动试验及试运行导则 |
China National Standards bin |
English PDF |
| GB/T 28545-2023 |
Guidelines for modernization and performance improvement of turbines, storage pumps and water pump turbines {译} 水轮机、蓄能泵和水泵水轮机更新改造和性能改善导则 |
China National Standards bin |
English PDF |
| GB/T 22437.2-2023 |
Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes {译} 起重机 载荷与载荷组合的设计原则 第2部分：流动式起重机 |
China National Standards bin |
English PDF |
| GB/T 23802-2023 |
Technical delivery conditions for corrosion-resistant alloy seamless pipes for casing, tubing, coupling blanks and accessory materials for the oil and gas industry {译} 石油天然气工业 套管、油管、接箍毛坯及附件材料用耐蚀合金无缝管交货技术条件 |
China National Standards bin |
English PDF |
| GB/T 20656-2023 |
Oil and gas industry On-site inspection of new casing, tubing and drill pipe {译} 石油天然气工业 新套管、油管和钻杆现场检验 |
China National Standards bin |
English PDF |
| GB/T 19830-2023 |
Oil and gas industry Steel pipes for oil and gas well casing or tubing {译} 石油天然气工业 油气井套管或油管用钢管 |
China National Standards bin |
English PDF |
| GB/T 43318-2023 |
Gas turbine combined cycle power plant thermal performance test {译} 燃气轮机联合循环电站 热力性能试验 |
China National Standards bin |
English PDF |
| GB/T 19520.22-2023 |
Mechanical structures of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-110: Residential racks and cabinets for smart homes {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-110部分：智慧房屋用住宅机架和机柜 |
China National Standards bin |
English PDF |
| GB/T 43261-2023 |
Product acceptance plan combining zero acceptance sampling system with process control procedures {译} 零接收数抽样系统与过程控制程序相结合的产品验收方案 |
China National Standards bin |
English PDF |
| GB/T 43136-2023 |
Superabrasive products Grinding wheels for precision scribing of semiconductor chips {译} 超硬磨料制品 半导体芯片精密划切用砂轮 |
China National Standards bin |
English PDF |
| GB/T 19212.1-2023 |
Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests {译} 变压器、电抗器、电源装置及其组合的安全 第1部分：通用要求和试验 |
China National Standards bin |
English PDF |
| GB/T 10357.5-2023 |
Furniture mechanical properties test Part 5: Cabinet strength and durability {译} 家具力学性能试验 第5部分：柜类强度和耐久性 |
China National Standards bin |
English PDF |
| GB/T 10357.4-2023 |
Furniture mechanical properties test Part 4: Cabinet stability {译} 家具力学性能试验 第4部分：柜类稳定性 |
China National Standards bin |
English PDF |
| GB/T 42858-2023 |
Corrosion-resistant alloy coiled tubing {译} 耐蚀合金连续油管 |
China National Standards bin |
English PDF |
| GB/T 42949-2023 |
Leather color fastness test color fastness to rotating rubbing {译} 皮革 色牢度试验 旋转摩擦色牢度 |
China National Standards bin |
English PDF |
| GB/T 42907-2023 |
Testing of non-equilibrium carrier recombination lifetime in silicon ingots, silicon blocks and silicon wafers Non-contact eddy current induction method {译} 硅锭、硅块和硅片中非平衡载流子复合寿命的测试 非接触涡流感应法 |
China National Standards bin |
English PDF |
| GB/T 42872-2023 |
Non-destructive testing Ultrasonic testing and evaluation methods for in-service steam turbine blades {译} 无损检测 在役汽轮机叶片超声检测和评价方法 |
China National Standards bin |
English PDF |
| GB/T 42600-2023 |
Wind power generation system - Wind turbine tower and foundation design requirements {译} 风能发电系统 风力发电机组塔架和基础设计要求 |
China National Standards bin |
English PDF |
| GB/T 20320-2023 |
Wind power generation systems - Methods for measuring and evaluating electrical characteristics of wind turbines {译} 风能发电系统 风力发电机组电气特性测量和评估方法 |
China National Standards bin |
English PDF |
| GB/T 8094-2023 |
Harvesting machinery—Combine harvesters—Determination of grain tank capacity and performance of grain unloading mechanism {译} 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定 |
China National Standards bin |
English PDF |
| GB/T 42735-2023 |
Stress Control Polyolefin Heat Shrink Tubing {译} 应力控制聚烯烃热收缩管 |
China National Standards bin |
English PDF |
| GB/T 42736-2023 |
Semi-conductive polyolefin heat shrink tubing {译} 半导电聚烯烃热收缩管 |
China National Standards bin |
English PDF |
| GB/T 42536-2023 |
Combination valve for high-pressure hydrogen storage cylinders for vehicles {译} 车用高压储氢气瓶组合阀门 |
China National Standards bin |
English PDF |
| GB/T 42714-2023 |
General Specification for Electromagnetic Shielding Heat Shrink Tubing {译} 电磁屏蔽热缩管通用规范 |
China National Standards bin |
English PDF |
| GB/T 13674-2023 |
Specifications for fuel use in aviation-derived gas turbines {译} 航空派生型燃气轮机燃料使用规范 |
China National Standards bin |
English PDF |
| GB/T 42591-2023 |
Gas turbines - Specifications for quality control {译} 燃气轮机 质量控制规范 |
China National Standards bin |
English PDF |
| GB/T 23479-2023 |
Wind turbines Double-fed asynchronous generator {译} 风力发电机组 双馈异步发电机 |
China National Standards bin |
English PDF |
| GB/T 42808-2023 |
Technical Requirements for Electronic Data Interchange of Port-Sea-Rail Combined Transport {译} 港口海铁联运电子数据交换技术要求 |
China National Standards bin |
English PDF |
| GB/T 21655.1-2023 |
Textiles - Evaluation of moisture absorption and quick-drying properties - Part 1: Individual combination test method {译} 纺织品 吸湿速干性的评定 第1部分： 单项组合试验法 |
China National Standards bin |
English PDF |
| GB/T 42592-2023 |
Wind turbines - Ultrasonic testing method for wind rotor blades {译} 风力发电机组 风轮叶片超声波检测方法 |
China National Standards bin |
English PDF |
| GB/T 15613-2023 |
Model acceptance tests of turbines, storage pumps and pump turbines {译} 水轮机、蓄能泵和水泵水轮机模型验收试验 |
China National Standards bin |
English PDF |
| GB/T 30966.4-2023 |
Wind turbines - Communications for wind farm monitoring systems - Part 4: Mapping to communication protocols {译} 风力发电机组 风力发电场监控系统通信 第4部分：映射到通信规约 |
China National Standards bin |
English PDF |
| GB/T 26471-2023 |
Rules for erection, dismantling and climbing of tower cranes {译} 塔式起重机 安装、拆卸与爬升规则 |
China National Standards bin |
English PDF |
| GB/T 19215.5-2023 |
Cable duct systems for electrical installations - Part 2: Particular requirements - Section 3: Grooved cable duct systems for installation in cabinets {译} 电气安装用电缆槽管系统 第2部分：特殊要求 第3节：安装在机柜中的带槽电缆线槽系统 |
China National Standards bin |
English PDF |
| GB/T 42399.3-2023 |
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 3: Combined systems {译} 无损检测仪器 相控阵超声设备的性能与检验 第3部分：组合系统 |
China National Standards bin |
English PDF |
| GB/T 16731-2023 |
Classification of sound-absorbing performance of building sound-absorbing products {译} 建筑吸声产品的吸声性能分级 |
China National Standards bin |
English PDF |
| GB/T 5170.18-2022 |
Test methods for environmental test equipment - Part 18: Temperature/humidity combined cycle test equipment {译} 环境试验设备检验方法 第18部分：温度/湿度组合循环试验设备 |
China National Standards bin |
English PDF |
| GB/T 41512-2022 |
Distributed Wind Turbine {译} 分散式风力发电机组 |
China National Standards bin |
English PDF |
| GB/T 41593-2022 |
extruded silicone tubing {译} 挤出硅树脂管 |
China National Standards bin |
English PDF |
| GB/T 41602-2022 |
Food processing equipment Combined equipment Rotary hot air oven {译} 饮食加工设备 组合型设备 旋转热风烤炉 |
China National Standards bin |
English PDF |
| GB/T 21391-2022 |
Measuring natural gas flow with gas turbine flowmeter {译} 用气体涡轮流量计测量天然气流量 |
China National Standards bin |
English PDF |
| GB/T 41398-2022 |
Minimum requirements for binocular barrel of microscope {译} 显微镜 双目镜筒最低要求 |
China National Standards bin |
English PDF |
| GB/T 24141.2-2022 |
Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards bin |
English PDF |
| GB/T 42223-2022 |
Textiles - Tests for color fastness - Color fastness to rubbing Gakushin method {译} 纺织品 色牢度试验 耐摩擦色牢度 Gakushin法 |
China National Standards bin |
English PDF |
| GB/T 16857.9-2022 |
Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance and Re-inspection Testing Part 9: Coordinate Measuring Machines Equipped with Multiple Probing Systems {译} 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第9部分：配备多种探测系统的坐标测量机 |
China National Standards bin |
English PDF |
| GB/T 20657-2022 |
Oil and gas industry - Performance formulas and calculations for casing, tubing, drill pipe, and line pipe used as casing or tubing {译} 石油天然气工业 套管、油管、钻杆和用作套管或油管的管线管性能公式及计算 |
China National Standards bin |
English PDF |
| GB/T 9253-2022 |
Oil and Gas Industry Machining, Measurement and Inspection of Casing, Tubing and Line Pipe Threads {译} 石油天然气工业 套管、油管和管线管螺纹的加工、测量和检验 |
China National Standards bin |
English PDF |
| GB/T 42230-2022 |
Requirements for binding and fixing steel plate coils for road transport {译} 钢板卷道路运输捆绑固定要求 |
China National Standards bin |
English PDF |
| GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat {译} 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 |
China National Standards bin |
English PDF |
| GB/T 12085.22-2022 |
Optics and photonics - Environmental test methods - Part 22: Combined test of low temperature, high temperature or temperature change with impact or random vibration {译} 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验 |
China National Standards bin |
English PDF |
| GB/T 18216.10-2022 |
Equipment for testing, measuring or monitoring electrical safety protection measures for low-voltage power distribution systems up to and including 1000 V AC and 1500 V DC Part 10: Combined measuring equipment for testing, measuring or monitoring protecti {译} 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第10部分：用于防护措施的试验、测量或监控的组合测量设备 |
China National Standards bin |
English PDF |
| GB/T 4728.12-2022 |
Graphical symbols for electrical diagrams - Part 12: binary logic elements {译} 电气简图用图形符号 第12部分：二进制逻辑元件 |
China National Standards bin |
English PDF |
| GB/T 18663.4-2022 |
Mechanical construction of electronic equipment - Tests for metric and imperial series - Part 4: Combinations of performance levels for modular cabinets {译} 电子设备机械结构 公制系列和英制系列的试验 第4部分：模数机柜的性能等级组合 |
China National Standards bin |
English PDF |
| GB/T 41720-2022 |
Heat Shrink Chlorinated Polyolefin Tubing {译} 热收缩氯化聚烯烃管 |
China National Standards bin |
English PDF |
| GB 41918-2022 |
biological safety cabinet {译} 生物安全柜 |
China National Standards bin |
English PDF |
| GB/T 41886-2022 |
Cabin acoustic design requirements for transport category aircraft {译} 运输类飞机舱内声学设计要求 |
China National Standards bin |
English PDF |
| GB/T 42047-2022 |
Determination method for outgassing products of materials and components in the sealed cabin of manned spacecraft {译} 载人航天器密封舱内材料和部组件出气产物测定方法 |
China National Standards bin |
English PDF |
| GB/T 30966.6-2022 |
Wind turbines - Communications for wind farm monitoring systems - Part 6: Logical node classes and data classes for condition monitoring {译} 风力发电机组 风力发电场监控系统通信 第6部分：状态监测的逻辑节点类和数据类 |
China National Standards bin |
English PDF |
| GB/T 30966.5-2022 |
Wind turbines - Communications for wind farm monitoring systems - Part 5: Conformance testing {译} 风力发电机组 风力发电场监控系统通信 第5部分：一致性测试 |
China National Standards bin |
English PDF |
| GB/T 30966.3-2022 |
Wind turbines - Communications for wind farm monitoring systems - Part 3: Information exchange model {译} 风力发电机组 风力发电场监控系统通信 第3部分：信息交换模型 |
China National Standards bin |
English PDF |
| GB/T 30966.2-2022 |
Wind turbines - Communications for wind park monitoring systems - Part 2: Information model {译} 风力发电机组 风力发电场监控系统通信 第2部分：信息模型 |
China National Standards bin |
English PDF |
| GB/T 30966.1-2022 |
Wind turbines -- Communications for wind farm monitoring systems -- Part 1: Principles and models {译} 风力发电机组 风力发电场监控系统通信 第1部分：原则与模型 |
China National Standards bin |
English PDF |
| GB/T 19072-2022 |
wind turbine tower {译} 风力发电机组 塔架 |
China National Standards bin |
English PDF |
| GB/T 31517.1-2022 |
Design requirements for fixed offshore wind turbines {译} 固定式海上风力发电机组 设计要求 |
China National Standards bin |
English PDF |
| GB/T 18451.1-2022 |
Wind turbine design requirements {译} 风力发电机组 设计要求 |
China National Standards bin |
English PDF |
| GB/T 3488.4-2022 |
Cemented carbide - Metallographic determination of microstructure - Part 4: Metallographic determination of porosity, non-combined carbon defects and decarburized phases {译} 硬质合金 显微组织的金相测定 第4部分：孔隙度、非化合碳缺陷和脱碳相的金相测定 |
China National Standards bin |
English PDF |
| GB/T 40548-2021 |
Technical specification of separate layers pressure control and combined layers drainage for coalbed methane wells 煤层气井分层控压合层排采技术规范 |
China National Standards bin |
English PDF |
| GB/T 40433-2021 |
Technical specifications of combined power source for electric vehicles 电动汽车用混合电源技术要求 |
China National Standards bin |
English PDF |
| GB/T 40370-2021 |
Calculation methods for energy consumption index of gas-steam combined cycle cogeneration 燃气-蒸汽联合循环热电联产能耗指标计算方法 |
China National Standards bin |
English PDF |
| GB/T 18451.2-2021 |
Wind turbines—Power performance measurements of electricity producing 风力发电机组 功率特性测试 |
China National Standards bin |
English PDF |
| GB/T 14172-2021 |
Bench test methods of static roll stability for motor vehicles, trailers and combination vehicles 汽车、挂车及汽车列车静侧倾稳定性台架试验方法 |
China National Standards bin |
English PDF |
| GB/T 4214.14-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for refrigerators, frozen-food storage cabinets and food freezers 家用和类似用途电器噪声测试方法 电冰箱、冷冻食品储藏箱和食品冷冻箱的特殊要求 |
China National Standards bin |
English PDF |
| GB/T 40376-2021 |
Cement based binder for interior decoration 室内装修用水泥基胶结料 |
China National Standards bin |
English PDF |
| GB/T 40543-2021 |
Petroleum and natural gas industries—Materials selection for high content CO2 for casing, tubing and downhole equipment 石油天然气工业 高含CO2环境用套管、油管及井下工具的材料选择 |
China National Standards bin |
English PDF |
| GB/T 40236-2021 |
Borosilicate glass tubing 硼硅玻璃管道 |
China National Standards bin |
English PDF |
| GB/T 14949.12-2021 |
Manganese ores - Determination of combined water content - Gravimetric method 锰矿石 化合水含量的测定 重量法 |
China National Standards bin |
English PDF |
| GB/T 6490-2021 |
Water-turbine pump 水轮泵 |
China National Standards bin |
English PDF |
| GB/T 40082-2021 |
Wind turbines—Drive train ground test specification 风力发电机组 传动链地面测试技术规范 |
China National Standards bin |
English PDF |
| GB/T 21718-2021 |
Fundamental technical requirements for small hydraulic turbines 小型水轮机基本技术条件 |
China National Standards bin |
English PDF |
| GB/T 39748.9-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分：称重法测定密度 |
China National Standards bin |
English PDF |
| GB/T 39748.8-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 |
China National Standards bin |
English PDF |
| GB/T 39748.7-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 |
China National Standards bin |
English PDF |
| GB/T 39748.6-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 |
China National Standards bin |
English PDF |
| GB/T 39748.11-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分：可吸入颗粒含量的测定 |
China National Standards bin |
English PDF |
| GB/T 39748.10-2021 |
Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分：电位滴定法测定可萃取聚合物量 |
China National Standards bin |
English PDF |
| GB/T 4214.8-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these 家用和类似用途电器噪声测试方法 电灶、烤箱、烤架、微波炉及其组合器具的特殊要求 |
China National Standards bin |
English PDF |
| GB/T 39779-2021 |
Design guidelines for distributed energy system of combined cooling, heating and power 分布式冷热电能源系统设计导则 |
China National Standards bin |
English PDF |
| GB/T 25388.2-2021 |
Wind turbines generator system—Double-fed converter—Part 2: Test method 风力发电机组 双馈式变流器 第2部分：试验方法 |
China National Standards bin |
English PDF |
| GB/T 25388.1-2021 |
Wind turbines generator system—Double-fed converter—Part 1: Technical condition 风力发电机组 双馈式变流器 第1部分：技术条件 |
China National Standards bin |
English PDF |
| GB/T 25387.2-2021 |
Wind turbines generator system—Full-power converter—Part 2:Test method 风力发电机组 全功率变流器 第2部分：试验方法 |
China National Standards bin |
English PDF |
| GB/T 25387.1-2021 |
Wind turbines—Control system—Part 2：Test method 风力发电机组 全功率变流器 第1部分：技术条件 |
China National Standards bin |
English PDF |
| GB/T 25386.2-2021 |
Wind turbines—Control system—Part 2：Test method 风力发电机组 控制系统 第2部分：试验方法 |
China National Standards bin |
English PDF |
| GB/T 25386.1-2021 |
Wind turbines—Control system—Part 1：Technical condition 风力发电机组 控制系统 第1部分：技术条件 |
China National Standards bin |
English PDF |
| GB/T 17421.10-2021 |
Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools 机床检验通则 第10部分：数控机床探测系统测量性能的测定 |
China National Standards bin |
English PDF |
| GB/T 20303.5-2021 |
Cranes—Cabins and control stations—Part 5: Overhead travelling and portal bridge cranes 起重机 司机室和控制站 第5 部分:桥式和门式起重机 |
China National Standards bin |
English PDF |
| GB/T 41216-2021 |
Marine combine connecting line for mooring 船用系泊组合连接索 |
China National Standards bin |
English PDF |
| GB/T 22437.5-2021 |
Cranes—Design principles for loads and load combinations—Part 5：Overhead travelling and portal bridge cranes 起重机 载荷与载荷组合的设计原则 第5部分：桥式和门式起重机 |
China National Standards bin |
English PDF |
| GB/T 20303.2-2021 |
Cranes—Cabins and control stations—Part 2:Mobile cranes 起重机 司机室和控制站 第2部分：流动式起重机 |
China National Standards bin |
English PDF |
| GB/T 41028-2021 |
Requirements of aerospace fluid systems impulse testing of hydraulic hose ，tubing and fitting assemblies 航空航天流体系统液压软管、管道和接头组件的脉冲试验要求 |
China National Standards bin |
English PDF |
| GB/T 10429-2021 |
Single-stage centripetal turbine torque converters—Types and basic parameters 单级向心涡轮液力变矩器 型式和基本参数 |
China National Standards bin |
English PDF |
| GB/T 31723.414-2021 |
Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (field conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-14部分：电磁兼容 电缆组件(现场条件)的耦合衰减 吸收钳法 |
China National Standards bin |
English PDF |
| GB/T 31723.413-2021 |
Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分：电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 |
China National Standards bin |
English PDF |
| GB/T 31723.412-2021 |
Metallic communication cable test methods—Part 4-12: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of connecting hardware—Absorbing clamp method 金属通信电缆试验方法 第4-12部分：电磁兼容 连接硬件的耦合衰减或屏蔽衰减 吸收钳法 |
China National Standards bin |
English PDF |
| GB/T 41171-2021 |
Urine-absorbing aids for incontinence -- Measurement of airborne respirable polyacrylate superabsorbent materials -- Determination of dust in collection cassettes by sodium atomic absorption spectrometry 失禁用尿吸收辅助器具? 空气中可吸入聚丙烯酸高吸水性材料测量 钠原子吸收光谱法对采集盒粉尘的测定 |
China National Standards bin |
English PDF |
| GB/T 41024-2021 |
Load combination and design criteria for structural analysis of spent fuel transport cask 乏燃料运输容器结构分析的载荷组合和设计准则 |
China National Standards bin |
English PDF |
| GB/T 40928-2021 |
Telemark skis and bindings—Binding mounting area—Requirements and test methods 特里马滑雪板 固定器安装区 要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 40923.1-2021 |
Snowboards—binding mounting area—Part 1:Requirements and test methods for snowboards without inserts 滑雪单板 固定器安装区 第1部分：无嵌件滑雪单板的要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 40925-2021 |
Snowboard strap bindings for soft boots—Requirements and test methods 滑雪单板软靴束带固定器 要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 40922-2021 |
Telemark ski-boots for adults—Interface with Telemark ski-bindings—Requirements and test methods 成人特里马滑雪靴 特里马滑雪板固定器接口 要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 40924-2021 |
Snowboard-boots—Interface with snowboard bindings 单板滑雪靴 滑雪板固定器接口 |
China National Standards bin |
English PDF |
| GB/T 40932-2021 |
Snowboard step-in bindings—Requirements and test methods 滑雪单板踏入式固定器 要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 40923.2-2021 |
Snowboards—binding mounting area—Part 2:Requirements and test methods for snowboards with inserts 滑雪单板 固定器安装区 第2部分：含嵌件滑雪单板的要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 40940-2021 |
Snowboard plate-bindings—Requirements and test methods 滑雪单板固定器 要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 40930-2021 |
Touring ski-boots for adults—Interface with touring ski-bindings—Requirements and test methods 成人旅行滑雪靴 旅行滑雪板固定器接口 要求和试验方法 |
China National Standards bin |
English PDF |
| GB/T 40739-2021 |
Gas turbines -- Data acquisition and trend monitoring system requirements for gas turbine installations 燃气轮机? 燃气轮机设备的数据采集和趋势监测系统要求 |
China National Standards bin |
English PDF |
| GB/T 13675-2021 |
Aero-derivative gas turbines preparation for packing and shipping 航空派生型燃气轮机包装与运输 |
China National Standards bin |
English PDF |
| GB/T 40815.4-2021 |
Mechanical structures for electrical and electronic equipment—Thermal managementfor cabinets in accordance with inch and metric system—Part 4:Cooling performance tests for water supplied heat exchangers in electronic cabinets 电气和电子设备机械结构 符合英制系列和公制系列机柜的热管理 第4部分：电子机柜中供水热交换器的冷却性能试验 |
China National Standards bin |
English PDF |
| GB/T 40815.2-2021 |
Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2:Method for the determination of forced air cooling 电气和电子设备机械结构 符合英制系列和公制系列机柜的热管理 第2部分：强迫风冷的确定方法 |
China National Standards bin |
English PDF |
| GB/T 18663.2-2021 |
Mechanical structures for electronic equipment—Tests for metric and inch system—Part 2: Seismic tests for cabinets and racks 电子设备机械结构 公制系列和英制系列的试验 第2部分：机柜和机架的地震试验 |
China National Standards bin |
English PDF |
| GB/T 19290.7-2021 |
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-5:Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Cabine tinterface dimensions for miscellaneous equipment 发展中的电子设备构体机械结构模数序列 第2-5部分：分规范 25 mm设备构体的接口协调尺寸 各种设备用机柜接口尺寸 |
China National Standards bin |
English PDF |
| GB/T 40738-2021 |
Investment casting—Technical specification for rapid shell build with colloidal silica binder 熔模铸造 硅溶胶快速制壳工艺规范 |
China National Standards bin |
English PDF |
| GB/T 40610-2021 |
Technical specifications for binary description and interchange of power system online power flow data 电力系统在线潮流数据二进制描述及交换规范 |
China National Standards bin |
English PDF |
| GB/T 40920-2021 |
Leather—Tests for colour fastness—Colour fastness to cycles of to-and-fro rubbing 皮革 色牢度试验 往复式摩擦色牢度 |
China National Standards bin |
English PDF |
| GB/T 39037.1-2021 |
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships—General requirements—Part 1：Commercial vehicles and combinations of vehicles，semi-trailers excluded 用于海上滚装船运输的道路车辆的系固点与系固设施布置 通用要求 第1部分：商用车和汽车列车（不包括半挂车） |
China National Standards bin |
English PDF |
| GB/T 39518-2020 |
Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems 产品几何技术规范（GPS） 使用单探针和多探针接触式探测系统坐标测量机的检测不确定度评估指南 |
China National Standards bin |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
