Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 5270-2024 |
Metallic coatings on metal substrates - Electrodeposited and chemically deposited layers - Review of adhesion strength test methods {译} 金属基体上的金属覆盖层-电沉积和化学沉积层-附着强度试验方法评述 |
China National Standards call |
 English PDF |
| GB/T 43779-2024 |
Network security technology-Technical specification for trusted identity authentication of calling users based on password tokens {译} 网络安全技术-基于密码令牌的主叫用户可信身份鉴别技术规范 |
China National Standards call |
English PDF |
| GB/T 3836.18-2024 |
Explosive atmospheres-Part 18: Intrinsically safe electrical systems {译} 爆炸性环境-第18部分：本质安全电气系统 |
China National Standards call |
English PDF |
| GB/T 43387-2023 |
Product Recall Terminology {译} 产品召回 术语 |
China National Standards call |
English PDF |
| GB/T 25368-2023 |
Diesel engine electronically controlled common rail system high-pressure fuel supply pump assembly {译} 柴油机电控共轨系统 高压供油泵总成 |
China National Standards call |
English PDF |
| GB/T 42744-2023 |
Microwave circuit electronically adjustable attenuator test method {译} 微波电路 电调衰减器测试方法 |
China National Standards call |
English PDF |
| GB/T 42683-2023 |
Ships and marine technology - Test requirements for electrically heated handrails {译} 船舶与海上技术 电加热扶手试验要求 |
China National Standards call |
English PDF |
| GB/T 17001.7-2023 |
Security inks - Part 7: Optically variable security inks {译} 防伪油墨 第7部分：光学可变防伪油墨 |
China National Standards call |
English PDF |
| GB/T 18380.34-2022 |
Fire tests of electric and optical cables under fire conditions - Part 34: vertical flame spread test for vertically mounted bunched wires and cables, class B {译} 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 |
China National Standards call |
English PDF |
| GB/T 18380.33-2022 |
Fire tests of electric and optical cables under fire conditions - Part 33: vertical flame spread test for vertically mounted bunched wires and cables, class A {译} 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 |
China National Standards call |
English PDF |
| GB/T 18380.32-2022 |
Fire tests of electric and optical cables under fire conditions - Part 32: vertical flame spread test for vertically mounted bunched wires and cables, class A, f / R {译} 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 |
China National Standards call |
English PDF |
| GB/T 18380.36-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 36：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 |
China National Standards call |
English PDF |
| GB/T 18380.35-2022 |
Tests on electric and optical fibre cables under fire conditions - Part 35: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 |
China National Standards call |
English PDF |
| GB/T 18380.31-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards call |
English PDF |
| GB/T 41281-2022 |
Authenticity test of photosynthetically active radiation remote sensing products {译} 光合有效辐射遥感产品真实性检验 |
China National Standards call |
English PDF |
| GB/T 42125.19-2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves {译} 测量、控制和实验室用电气设备的安全要求 第19部分：电动控制阀门执行器的特殊要求 |
China National Standards call |
English PDF |
| GB/T 15623.3-2022 |
Hydraulic transmission - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves {译} 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 |
China National Standards call |
English PDF |
| GB/T 40463-2021 |
Machanically separated meat 机械分离肉 |
China National Standards call |
English PDF |
| GB/T 17906-2021 |
Fire emergency rescue equipment—General technical specifications for hydraulically operated rescue tools 消防应急救援装备 液压破拆工具通用技术条件 |
China National Standards call |
English PDF |
| GB/T 4214.11-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for electrically-operated food preparation appliances 家用和类似用途电器噪声测试方法 电动食品加工器具的特殊要求 |
China National Standards call |
English PDF |
| GB/T 40485-2021 |
Method of determining automatically the random reflectance of vitrinite in coal—Image analysis method 煤的镜质体随机反射率自动测定 图像分析法 |
China National Standards call |
English PDF |
| GB/T 40294-2021 |
Methods for determining electrically excited synchronous machine quantities from tests 确定电励磁同步电机参数的试验方法 |
China National Standards call |
English PDF |
| GB/T 28515.2-2021 |
Test method for automatically switched optical network(ASON)—Part 2:OTN-based ASON 自动交换光网络(ASON)测试方法 第2部分：基于OTN的ASON |
China National Standards call |
English PDF |
| GB/T 17421.10-2021 |
Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools 机床检验通则 第10部分：数控机床探测系统测量性能的测定 |
China National Standards call |
English PDF |
| GB/T 5267.2-2021 |
Fasteners—Non-electrolytically applied zinc flake coatings 紧固件 非电解锌片涂层 |
China National Standards call |
English PDF |
| GB/T 26557-2021 |
Builders hoists for persons and materials with vertically guided cages 吊笼有垂直导向的人货两用施工升降机 |
China National Standards call |
English PDF |
| GB/T 41047-2021 |
Technical requirements for traceability system of recall process of motor vehicle products 汽车产品召回过程追溯系统技术要求 |
China National Standards call |
English PDF |
| GB/T 40914-2021 |
Motor vehicle products recall－Early-warning rules 汽车产品召回 预警规则 |
China National Standards call |
English PDF |
| GB/T 40993-2021 |
Consumer product recall—Effect evaluation 消费品召回 效果评价 |
China National Standards call |
English PDF |
| GB/T 40990-2021 |
Comsumer product recall—Numbering rules and application 消费品召回 编号规则与应用 |
China National Standards call |
English PDF |
| GB/T 3836.32-2021 |
Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation 爆炸性环境 第32部分：电子控制火花时限本质安全系统 |
China National Standards call |
English PDF |
| GB/T 22432-2021 |
Container transportation electronic data interchange—Vessel call information message 集装箱运输电子数据交换 船舶挂靠信息报文 |
China National Standards call |
English PDF |
| GB/T 39519-2020 |
Hydranlic cylindrically helical compression spring with high working stress—Technical specifications 高应力液压件圆柱螺旋压缩弹簧 技术条件 |
China National Standards call |
English PDF |
| GB/T 39063-2020 |
Consumer product recall—Risk assessment for electronics and electrical appliances 消费品召回 电子电器风险评估 |
China National Standards call |
English PDF |
| GB/T 39061-2020 |
Recall numbering rules and application for motor vehicle product 汽车产品召回编号规则与编号应用 |
China National Standards call |
English PDF |
| GB/T 15675-2020 |
Continuously electrolytically zinc/zinc-nickel alloy coated steel sheet and strip 连续电镀锌、锌镍合金镀层钢板及钢带 |
China National Standards call |
English PDF |
| GB 7300.203-2020 |
Feed additive—Part 2：Vitamins, provitamins and chemically well-defined substances having similar effect—Betaine 饲料添加剂 第2部分：维生素及类维生素 甜菜碱 |
China National Standards call |
English PDF |
| GB/T 38570-2020 |
Determination for ingredients of genetically modified plants—Target sequencing methods 植物转基因成分测定 目标序列测序法 |
China National Standards call |
English PDF |
| GB/T 38505-2020 |
General detection methods of genetically modified products 转基因产品通用检测方法 |
China National Standards call |
English PDF |
| GB 9706.217-2020 |
Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment 医用电气设备 第2-17部分：自动控制式近距离治疗后装设备的基本安全和基本性能专用要求 |
China National Standards call |
English PDF |
| GB/T 39603-2020 |
Guidelines for the recall effectiveness evaluation of defective motor vehicle products 缺陷汽车产品召回效果评估指南 |
China National Standards call |
English PDF |
| GB/T 39429-2020 |
Non-destructive testing—Method for thermoelectric sorting of electrically conductive materials 无损检测 导电材料热电势分选方法 |
China National Standards call |
English PDF |
| GB/T 3836.17-2019 |
Explosive atmospheres—Part 17: Equipment protection by pressurized room “p”and artifically ventilated room “v” 爆炸性环境 第17部分：由正压房间“p”和人工通风房间“v”保护的设备 |
China National Standards call |
English PDF |
| GB 7300.202-2019 |
Feed additives－Part 2：Vitamins, provitamins and chemically well-defined substances having similar effect－Vitamin D3 oily form 饲料添加剂 第2部分：维生素及类维生素 维生素D3油 |
China National Standards call |
English PDF |
| GB 7300.201-2019 |
Feed additives—Part 2：Vitamins,provitamins and chemically well-defined substances having similar effect—L-Ascorbyl-2-phosphate 饲料添加剂 第2部分：维生素及类维生素 L-抗坏血酸-2-磷酸酯盐 |
China National Standards call |
English PDF |
| GB 38189-2019 |
Safety of equipment electrically connected to a telecommunication network 与通信网络电气连接的电子设备的安全 |
China National Standards call |
English PDF |
| GB 38189-2019 |
Safety of equipment electrically connected to a telecommunication network 与通信网络电气连接的电子设备的安全 |
China National Standards call |
English PDF |
| GB/T 37826-2019 |
Test methods for electrically properties for electrically heated aircraft glass 航空电加温玻璃电学性能试验方法 |
China National Standards call |
English PDF |
| GB/T 37501-2019 |
Brass wires for unidirectional travelling wire electrical-discharge machining in numerically controlled machines 数控机床用单向走丝电火花加工用黄铜线 |
China National Standards call |
English PDF |
| GB/T 37498-2019 |
Rubber,raw natural—Determination of the gel content of technically specified rubber (TSR) 天然生胶 技术分级橡胶（TSR）凝胶含量的测定 |
China National Standards call |
English PDF |
| GB/T 37656-2019 |
Maritime navigation and radiocommunication equipment and systems—VHF radiotelephone equipment incorporating Class“D”Digital Selective calling（DSC）—Methods of testing and required test results 海上导航和无线电通信设备及系统 D级数字选择性呼叫（DSC）甚高频（VHF）无线电话 测试方法及要求的测试结果 |
China National Standards call |
English PDF |
| GB/T 37597-2019 |
Electrically operated food preparation appliances—Methods for measuring the performance 电动食品加工器具 性能测试方法 |
China National Standards call |
English PDF |
| GB/T 37123-2018 |
Electrically driven motor vehicl eair-conditioning unit 汽车用电驱动空调器 |
China National Standards call |
English PDF |
| GB/T 8081-2018 |
Rubber, raw natural—Guidelines for the specification of technically specified rubber (TSR) 天然生胶-技术分级橡胶（TSR）规格导则 |
China National Standards call |
English PDF |
| GB/T 8082-2018 |
Rubber,raw natural—Technically specified rubber (TSR)—Packing,marking,storage and transportion 天然生胶-技术分级橡胶（TSR）-包装、标志、贮存和运输 |
China National Standards call |
English PDF |
| GB/T 22068-2018 |
Electrically driven compressor assembly for automobile air conditioning 汽车空调用电动压缩机总成 |
China National Standards call |
English PDF |
| GB/T 23567.3-2018 |
Reliability evaluation for numerical control machine tools—Part 3: Numerically controlled turning machines and turning centres 数控机床可靠性评定 第3部分：数控车床与车削中心 |
China National Standards call |
English PDF |
| GB/T 17737.107-2018 |
Coaxial communication cables—Part 1-107: Electrical test methods—Test for cable microphony charge level (mechanically induced noise) 同轴通信电缆 第1-107部分：电气试验方法 电缆颤噪电荷电平（机械感应噪声）试验 |
China National Standards call |
English PDF |
| GB/T 19495.4-2018 |
Detection of genetically modified organisms and derived products—Qualitative real-time polymerase chain reaction（PCR） methods 转基因产品检测 实时荧光定性聚合酶链式反应（PCR）检测方法 |
China National Standards call |
English PDF |
| GB/T 19495.5-2018 |
Detection of genetically modified organisms and derived products—Quantitative real-time polymerase chain reaction（PCR） methods 转基因产品检测 实时荧光定量聚合酶链式反应（PCR）检测方法 |
China National Standards call |
English PDF |
| GB/T 15623.1-2018 |
Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 1: Test methods for four-port directional flow-control valves 液压传动 电调制液压控制阀 第1部分：四通方向流量控制阀试验方法 |
China National Standards call |
English PDF |
| GB/T 15623.2-2017 |
Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 2: Test methods for three-port directional flow-control valves 液压传动 电调制液压控制阀 第2部分：三通方向流量控制阀试验方法 |
China National Standards call |
English PDF |
| GB/T 34711-2017 |
Testing method for classification of chemically unstable gases 化学不稳定性气体分类试验方法 |
China National Standards call |
English PDF |
| GB/T 34992-2017 |
12.5kHz TDMA channel based professional digital trunking communication system—Technical specifications for call control layer of air interface 基于12.5kHz信道的时分多址（TDMA）专用数字集群通信系统 空中接口呼叫控制层技术规范 |
China National Standards call |
English PDF |
| GB/T 34400-2017 |
Consumer product recall—Guidelines for manufacturers 消费品召回 生产者指南 |
China National Standards call |
English PDF |
| GB/T 16462.3-2017 |
Test conditions for numerically controlled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分：倒置立式机床几何精度检验 |
China National Standards call |
English PDF |
| GB/T 16462.2-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心检验条件 第2部分：立式机床几何精度检验 |
China National Standards call |
English PDF |
| GB/T 16462.5-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations 数控车床和车削中心检验条件 第5部分：进给率、速度和插补精度检验 |
China National Standards call |
English PDF |
| GB/T 16462.6-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece 数控车床和车削中心检验条件 第6部分：精加工试件精度检验 |
China National Standards call |
English PDF |
| GB/T 33807-2017 |
Detection of genetically modified components in maize—Gene chip method 玉米中转基因成分的测定 基因芯片法 |
China National Standards call |
English PDF |
| GB/T 33825-2017 |
Steel/copper composite rod and wire for hermetically sealed relay 密封继电器用钢包铜复合棒线材 |
China National Standards call |
English PDF |
| GB/T 21645.11-2017 |
Technical requirements for Automatically Switched Optical Network (ASON)—Part11:Path Computation Element (PCE) and protocol 自动交换光网络（ASON）技术要求 第11部分：路径计算单元（PCE）及协议 |
China National Standards call |
English PDF |
| GB/T 21645.10-2017 |
Technical requirements for automatically switched optical network(ASON)—Part 10：Multi-layer and multi-region control plane 自动交换光网络（ASON）技术要求 第10部分：多层多域控制平面 |
China National Standards call |
English PDF |
| GB/T 33526-2017 |
Genetically modified organism detection method by digital PCR 转基因植物产品数字PCR检测方法 |
China National Standards call |
English PDF |
| GB/T 35494.1-2017 |
Test methods for isotropic electrically conductive adhesives—Part 1:General test methods 各向同性导电胶粘剂试验方法 第1部分：通用方法 |
China National Standards call |
English PDF |
| GB/T 14536.19-2017 |
Automatic electrical controls for household and similar use—Particular requirements for electrically operated gas valves, including mechanical requirements 家用和类似用途电自动控制器 电动燃气阀的特殊要求，包括机械要求 |
China National Standards call |
English PDF |
| GB/T 5267.2-2017 |
Fasteners—Non-electrolytically applied zinc flake coatings 紧固件 非电解锌片涂层 |
China National Standards call |
English PDF |
| GB/T 3836.18-2017 |
Explosive atmospheres—Part 18: Intrinsically safe electrical systems 爆炸性环境 第18部分：本质安全电气系统 |
China National Standards call |
English PDF |
| GB/T 19495.9-2017 |
Detection of genetically modified organisms and derived products—Liquid bead array detection for plant products 转基因产品检测 植物产品液相芯片检测方法 |
China National Standards call |
English PDF |
| GB/T 35535-2017 |
Detection of genetically modified components in soybean and canola—Membrane-based gene-chip method 大豆、油菜中外源基因成分的测定 膜芯片法 |
China National Standards call |
English PDF |
| GB/T 32657.2-2016 |
Technical requirements for automatically switched optical network (ASON) node—Part 2：Technical requirements for OTN-based ASON node 自动交换光网络（ASON）节点设备技术要求 第2部分：基于OTN的ASON节点设备技术要求 |
China National Standards call |
English PDF |
| GB/T 17421.4-2016 |
Test code for machine tools—Part 4: Circular tests for numerically controlled machine tools 机床检验通则 第4部分：数控机床的圆检验 |
China National Standards call |
English PDF |
| GB/T 17421.2-2016 |
Test code for machine tools—Partie 2: Determination of accuracy and repeatability positioning numerically controlled axes 机床检验通则 第2部分：数控轴线的定位精度和重复定位精度的确定 |
China National Standards call |
English PDF |
| GB/T 32526-2016 |
General specification for the equipment of passing azimuth angle vertically 方位垂直传递装置通用规范 |
China National Standards call |
English PDF |
| GB/T 32522-2016 |
Acoustics—Electroacoustic characteristics and measurements of spherically focusing ultrasonic transducers 声学 压电球面聚焦超声换能器的电声特性及其测量 |
China National Standards call |
English PDF |
| GB/T 32441-2015 |
General technical requirements of electrically driven ride-on vehicles for children 电动童车通用技术条件 |
China National Standards call |
English PDF |
| GB/T 32439-2015 |
Cross helically wound steel wires reinforced-polyethylene composite pipelines for water supply 给水用钢丝网增强聚乙烯复合管道 |
China National Standards call |
English PDF |
| GB/T 31814-2015 |
Frozen scallop 冻扇贝 |
China National Standards call |
English PDF |
| GB/T 31730-2015 |
Detection of genetically modified components in rice—Membrane-based array method 水稻中转基因成分测定 膜芯片法 |
China National Standards call |
English PDF |
| GB/T 18384.3-2015 |
Electrically propelled road vehicles—Safety specifications—Part 3: Protection of persons against electric shock 电动汽车 安全要求 第3部分：人员触电防护 |
China National Standards call |
English PDF |
| GB/T 18384.2-2015 |
Electrically propelled road vehicles—Safety specifications—Part 2: Vehicle operational safety means and protection against failures 电动汽车 安全要求 第2部分：操作安全和故障防护 |
China National Standards call |
English PDF |
| GB/T 18384.1-2015 |
Electrically propelled road vehicles—Safety specifications—Part 1: On-board rechargeable energy storage system(REESS) 电动汽车 安全要求 第1部分：车载可充电储能系统(REESS) |
China National Standards call |
English PDF |
| GB/T 5455-2014 |
Textiles―Burning behaviour―Determination of damaged Length,afterglow time and afterflame time of vertically oriented specimens 纺织品 燃烧性能 垂直方向损毁长度、阴燃和续燃时间的测定 |
China National Standards call |
English PDF |
| GB/T 30868-2014 |
Test method for measuring micropipe density of monocrystalline silicon carbide wafers―Chemically etching 碳化硅单晶片微管密度的测定 化学腐蚀法 |
China National Standards call |
English PDF |
| GB/T 30545-2014 |
Constant temperature controls for electrically heated blankets 电热毯恒温控制器 |
China National Standards call |
English PDF |
| GB/T 30320-2013 |
Geospatial database call-level interface 地理空间数据库访问接口 |
China National Standards call |
English PDF |
| GB/T 11313.24-2013 |
Radio frequency connectors―Part 24: Sectional specification-radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable networks (type F) 射频连接器 第24部分: 75Ω电缆分配系统用螺纹连接射频同轴连接器（F型）分规范 |
China National Standards call |
English PDF |
| GB/Z 6113.205-2013 |
Specification for radio disturbance and immunity measuring apparatus and methods―Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment 无线电骚扰和抗扰度测量设备和测量方法规范 第2-5部分：大型设备骚扰发射现场测量 |
China National Standards call |
English PDF |
| GB/T 3217-2013 |
Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties 永磁(硬磁)材料 磁性试验方法 |
China National Standards call |
English PDF |
| GB/T 29628-2013 |
Guides for methods of measurement of the magnetic properties of permanent(magnetically hard)materials by pulsed field magnetometry 永磁（硬磁）脉冲测量方法指南 |
China National Standards call |
English PDF |
| GB/T 29305-2012 |
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials 新的和老化后的纤维素电气绝缘材料粘均聚合度的测量 |
China National Standards call |
English PDF |
| GB/T 29228-2012 |
Technical requirements for public telecommunication network equipments security - calling party number information 公用电信网设备安全技术要求 主叫用户号码信息 |
China National Standards call |
English PDF |
| GB/T 29200-2012 |
Test method for public telecommunication network equipments security - calling party number information 公用电信网设备安全测试方法 主叫用户号码信息 |
China National Standards call |
English PDF |
| GB/T 21645.9-2012 |
Technical requirements for automatically switched optical network (ASON) - Part 9: External network to network interface(E-NNI) 自动交换光网络(ASON)技术要求 第9部分：外部网络-网络接口(E-NNI) |
China National Standards call |
English PDF |
| GB/T 18029.14-2012 |
Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooter - Requirements and test methods 轮椅车 第14部分：电动轮椅车和电动代步车动力和控制系统 要求和测试方法 |
China National Standards call |
English PDF |
| GB/T 12996-2012 |
Electrically powered wheelchair 电动轮椅车 |
China National Standards call |
English PDF |
| GB/T 28763-2012 |
Numerically controlled tube bending machine 数控弯管机 |
China National Standards call |
English PDF |
| GB/T 15623.3-2012 |
Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves 液压传动 电调制液压控制阀 第3部分：压力控制阀试验方法 |
China National Standards call |
English PDF |
| GB/T 28864.2-2012 |
Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions 软磁铁氧体磁心术语定义 第2部分：尺寸标注 |
China National Standards call |
English PDF |
| GB/T 28864.1-2012 |
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities 软磁铁氧体磁心术语定义 第1部分：物理缺陷术语 |
China National Standards call |
English PDF |
| GB/T 18029.21-2012 |
Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers 轮椅车 第21部分：电动轮椅车、电动代步车和电池充电器的电磁兼容性要求和测试方法 |
China National Standards call |
English PDF |
| GB/T 28721-2012 |
Cathodic protection of reinforcing steel in atmospherically exposed concrete structures 大气环境混凝土中钢筋的阴极保护 |
China National Standards call |
English PDF |
| GB/T 28681-2012 |
Technical regulation of postharvest handling on bulbs of lily, calla and gladiolus 百合、马蹄莲、唐菖蒲种球采后处理技术规程 |
China National Standards call |
English PDF |
| GB/T 28556-2012 |
Flameproof and intrinsically safe controller with frequency converter for coalmine ventilation fan 煤矿通风机用隔爆兼本质安全型变频调速控制器 |
China National Standards call |
English PDF |
| GB/T 28515.1-2012 |
Test specifications for automatically switched optical network（ASON）- Part 1：Test specifications for SDH-based ASON 自动交换光网络（ASON）测试方法 第1部分：基于SDH的ASON |
China National Standards call |
English PDF |
| GB/T 21645.8-2012 |
Technical requirements for automatically switched optical network - Part 8: Routing 自动交换光网络(ASON）技术要求 第8部分：路由 |
China National Standards call |
English PDF |
| GB/T 21645.5-2012 |
Technical requirements for automatically switched optical network - Part 5: User-Network Interface(UNI) 自动交换光网络(ASON）技术要求 第5部分：用户-网络接口(UNI) |
China National Standards call |
English PDF |
| GB 27900-2011 |
Firemen’s special call unit 消防员呼救器 |
China National Standards call |
English PDF |
| GB/Z 26822-2011 |
Document management - Information stored electronically - Recommendations for trustworthiness and reliability 文档管理 电子信息存储 真实性可靠性建议 |
China National Standards call |
English PDF |
| GB 26557-2011 |
Builders hoists for persons and materials with vertically guided cages 吊笼有垂直导向的人货两用施工升降机 |
China National Standards call |
English PDF |
| GB/Z 26577-2011 |
Production technical practice for green scallion 大葱生产技术规范 |
China National Standards call |
English PDF |
| GB/T 26200-2010 |
Emergency caller 应急呼叫器 |
China National Standards call |
English PDF |
| GB/T 16656.507-2010 |
Industrial automation systems and integration - Product data representation and exchange - Part 507: Application interpreted construct: Geometrically bounded surfacee 工业自动化系统与集成 产品数据表达与交换 第507部分：应用解释构造：几何有界曲面 |
China National Standards call |
English PDF |
| GB/T 26106-2010 |
Mechanically deposited coatings of zinc - Specification and test methods 机械镀锌层 技术规范和试验方法 |
China National Standards call |
English PDF |
| GB/T 25847-2010 |
Standard specification for chemically setting silicate chemical - resistant mortars 化学固化硅质耐腐蚀胶泥技术条件 |
China National Standards call |
English PDF |
| GB/T 25659.2-2010 |
Simplified numerically controlled horizontal turning machines - Part 2: Specifications 简式数控卧式车床 第2部分：技术条件 |
China National Standards call |
English PDF |
| GB/T 25659.1-2010 |
Simplified numerically controlled horizontal turning machines - Part 1: Testing of the accuracy 简式数控卧式车床 第1部分：精度检验 |
China National Standards call |
English PDF |
| GB/T 21645.7-2010 |
Technical requirements for automatically switched optical network －Part 7: Automatic discovery 自动交换光网络(ASON)技术要求 第7部分：自动发现 |
China National Standards call |
English PDF |
| GB/T 21645.4-2010 |
Technical requirements for automatically switched optical network - Part 4：Technical specification of signalling 自动交换光网络(ASON）技术要求 第4部分：信令技术 |
China National Standards call |
English PDF |
| GB/T 21645.2-2010 |
Technical requirements for automatically switched optical networks - Part 2：Terms and definitions 自动交换光网络(ASON)技术要求 第2部分：术语和定义 |
China National Standards call |
English PDF |
| GB 3836.19-2010 |
Explosive atmospheres - Part 19: Fieldbus intrinsically safe concept (FISCO) 爆炸性环境 第19部分：现场总线本质安全概念(FISCO) |
China National Standards call |
English PDF |
| GB 3836.18-2010 |
Explosive atmospheres - Part 18: Intrinsically safe system 爆炸性环境 第18部分：本质安全系统 |
China National Standards call |
English PDF |
| GB/T 5456-2009 |
Textiles - Burning behaviour - Flame spread properties of vertically oriented specimens 纺织品 燃烧性能 垂直方向试样火焰蔓延性能的测定 |
China National Standards call |
English PDF |
| GB/T 24367.1-2009 |
Technical requirements for automatically switched optical network (ASON) node - Part 1: Technical requirements for SDH-based ASON node 自动交换光网络(ASON)节点设备技术要求 第1部分：基于SDH的ASON节点设备技术要求 |
China National Standards call |
English PDF |
| GB/T 24310-2009 |
Tobacco and tobacco products - Detecting method of genetically modified organism contents 烟草及烟草制品 转基因检测方法 |
China National Standards call |
English PDF |
| GB/T 21645.6-2009 |
Technical requirements for automatically switched optical network - Part 6: Management plane 自动交换光网络(ASON)技术要求 第6部分：管理平面 |
China National Standards call |
English PDF |
| GB/T 21645.3-2009 |
Technical requirements for automatically switched optical network - Part 3: Data communication network 自动交换光网络(ASON)技术要求 第3部分：数据通信网(DCN) |
China National Standards call |
English PDF |
| GB/T 16462.8-2009 |
Test conditions for numerically controlled turning machines and turning centres - Part 8: Evaluation of thermal distortions 数控车床和车削中心检验条件 第8部分：热变形的评定 |
China National Standards call |
English PDF |
| GB/T 16462.7-2009 |
Test conditions for numerically controlled turning machines and turning centres - Part 7: Evaluation of contouring performance in the coordinate planes 数控车床和车削中心检验条件 第7部分：在坐标平面内轮廓特性的评定 |
China National Standards call |
English PDF |
| GB 12011-2009 |
Foot protection - Electrically insulating footwear 足部防护 电绝缘鞋 |
China National Standards call |
English PDF |
| GB/T 8746-2009 |
Textiles - Burning behaviour - Determination of ease of ignition of vertically oriented specimens 纺织品 燃烧性能 垂直方向试样易点燃性的测定 |
China National Standards call |
English PDF |
| GB/T 23253-2009 |
Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics 液压传动 电控液压泵 性能试验方法 |
China National Standards call |
English PDF |
| GB/T 17846-2009 |
Small craft - Electrically operated direct-current bilge pumps 小艇 直流电动舱底泵 |
China National Standards call |
English PDF |
| GB 22998-2008 |
Safety of machine tools - Large numerically controlled turning machines and turning centres 机床安全 大规格数控车床与车削中心 |
China National Standards call |
English PDF |
| GB 22997-2008 |
Safety of machine tools - Small numerically controlled turning machines and turning centres 机床安全 小规格数控车床与车削中心 |
China National Standards call |
English PDF |
| GB 14536.21-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated oil valves, including mechanical requirements 家用和类似用途电自动控制器 电动油阀的特殊要求, 包括机械要求 |
China National Standards call |
English PDF |
| GB 14536.13-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated door locks 家用和类似用途电自动控制器 电动门锁的特殊要求 |
China National Standards call |
English PDF |
| GB/T 22904-2008 |
Pulp, paper and board - Determination of total chlorine and organically bound chlorine 纸浆、纸和纸板 总氯和有机氯的测定 |
China National Standards call |
English PDF |
| GB/T 22896-2008 |
Paper and board - Determination of curl - Single vertically suspended test piece 纸和纸板 卷曲的测定 单个垂直悬挂试样法 |
China National Standards call |
English PDF |
| GB/T 22828-2008 |
Painting & calligraphy paper 书画纸 |
China National Standards call |
English PDF |
| GB 22659-2008 |
Safety of woodworking machines - Numerically controlled (NC)boring machines and routing machines 木工机床安全 数控钻床和数控镂铣机 |
China National Standards call |
English PDF |
| GB 9706.13-2008 |
Medical electrical equipment - Part 2: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment 医用电气设备 第2部分：自动控制式近距离治疗后装设备安全专用要求 |
China National Standards call |
English PDF |
| GB 4706.68-2008 |
Safety of household and similar electrical appliances - Particular requirements for drives for vertically moving garage doors for residential use 家用和类似用途电器的安全 住宅用垂直运动车库门的驱动装置的特殊要求 |
China National Standards call |
English PDF |
| GB/T 14330-2008 |
Machanically clamped carbide side milling cutters 硬质合金机夹三面刃铣刀 |
China National Standards call |
English PDF |
| GB/T 22506-2008 |
Inspection of grain and oils - Determination of 1- and 2- acyl lysophosphatidylcholine in enzymatically modified phospholipids - High performance liquid chromatography 粮油检验 酶改性磷脂中1-和2-溶血磷脂酰胆碱的测定 高效液相色谱法 |
China National Standards call |
English PDF |
| GB/T 22432-2008 |
Container transportation EDI - Vessel call info message 集装箱运输电子数据交换 挂靠信息报文 |
China National Standards call |
English PDF |
| GB/T 3658-2008 |
Methods of measurement of a.c. magnetic properties of magnetically soft materials 软磁材料交流磁性能环形试样的测量方法 |
China National Standards call |
English PDF |
| GB/T 3656-2008 |
Method of coercivity measurement for magnetically soft materials by pull out procedure 软磁材料矫顽力的抛移测量方法 |
China National Standards call |
English PDF |
| GB/T 15675-2008 |
Continuously electrolytically zinc/zinc-nickel alloy coated steel sheet and strip 连续电镀锌、锌镍合金镀层钢板及钢带 |
China National Standards call |
English PDF |
| GB/T 13012-2008 |
Methods of measurement of d.c. magnetic properties of magnetically soft materials 软磁材料直流磁性能的测量方法 |
China National Standards call |
English PDF |
| GB 14536.9-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated water valves, including mechanical requirements 家用和类似用途电自动控制器 电动水阀的特殊要求(包括机械要求) |
China National Standards call |
English PDF |
| GB/T 6948-2008 |
Method of determining microscopically the reflectance of vitrinite in coal 煤的镜质体反射率显微镜测定方法 |
China National Standards call |
English PDF |
| GB/T 22068-2008 |
Automobile air conditioning electrically driven compressor assembly 汽车空调用电动压缩机总成 |
China National Standards call |
English PDF |
| GB/T 18380.36-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 36:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 |
China National Standards call |
English PDF |
| GB/T 18380.35-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 35:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 |
China National Standards call |
English PDF |
| GB/T 18380.34-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 34:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 |
China National Standards call |
English PDF |
| GB/T 18380.33-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 33:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 |
China National Standards call |
English PDF |
| GB/T 18380.32-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 32:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 |
China National Standards call |
English PDF |
| GB/T 18380.31-2008 |
Test on electric and optical fibre cables under fire conditions - Part 31:Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards call |
English PDF |
| GB/T 8081-2008 |
Rubber, raw natural - Guidelines for the specification of technically specified rubber(TSR) 天然生胶 技术分级橡胶(TSR)规格导则 |
China National Standards call |
English PDF |
| GB/T 21947-2008 |
Numerically milling machines for special screws - Testing of the accuracy 数控异型螺杆铣床 精度检验 |
China National Standards call |
English PDF |
| GB/T 14986-2008 |
High saturation magnetic induction, magnetic compensate alloys depending on temperature variation, corrosion-resisting, iron-aluminium, Permanent permeability, soft magneticalloys 高饱和、磁温度补偿、耐蚀、铁铝、恒磁导率软磁合金 |
China National Standards call |
English PDF |
| GB/T 21645.1-2008 |
Technical requirements for Automatically Switched Optical Network - Part 1: Architecture and general requirements 自动交换光网络(ASON)技术要求 第1部分: 体系结构与总体要求 |
China National Standards call |
English PDF |
| GB/T 21443-2008 |
Bay scallop 海湾扇贝 |
China National Standards call |
English PDF |
| GB/T 21442-2008 |
Farrer’s scallop 栉孔扇贝 |
China National Standards call |
English PDF |
| GB/T 21438-2008 |
Parent scallop of farrers scallop 栉孔扇贝 亲贝 |
China National Standards call |
English PDF |
| GB/T 16872-2008 |
Farrer’s scallop - Seedling 栉孔扇贝 苗种 |
China National Standards call |
English PDF |
| GB/T 6316-2008 |
Vernier, dial and digital indicating gear tooth callipers 游标、带表和数显齿厚卡尺 |
China National Standards call |
English PDF |
| GB/T 21390-2008 |
Vernier, dial and digital display height callipers 游标、带表和数显高度卡尺 |
China National Standards call |
English PDF |
| GB/T 21388-2008 |
Vernier, dial and digital display depth callipers 游标、带表和数显深度卡尺 |
China National Standards call |
English PDF |
| GB/T 15261-2008 |
Measurement methods for acoustic properties of ultrasonically tissue-mimicking materials 超声仿组织材料声学特性的测量方法 |
China National Standards call |
English PDF |
| GB/T 21209-2007 |
Guide for the design and performance of cage induction motors specifically designed for converter supply 变频器供电笼型感应电动机设计和性能导则 |
China National Standards call |
English PDF |
| GB/T 16462.4-2007 |
Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验 |
China National Standards call |
English PDF |
| GB/T 16462.1-2007 |
Test conditions for numerically controlled turning machines and turning centers - Part 1: Geometric test for machines with a horizontal workholding spindle 数控车床和车削中心检验条件 第1部分：卧式机床几何精度检验 |
China National Standards call |
English PDF |
| GB/T 18311.16-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules 纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分：检查和测量 球面抛光套管端面半径 |
China National Standards call |
English PDF |
| GB/T 17574.9-2006 |
Semiconductor devices - Integrated circuits - Part 2-9: Digital integrated circuits - Blank detail specification for MOS ultraviolet light erasable electrically programmable read-only memories 半导体器件 集成电路 第2-9部分：数字集成电路 紫外光擦除电可编程MOS只读存储器空白详细规范 |
China National Standards call |
English PDF |
| GB/T 17574.11-2006 |
Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit electrically erasable and programmable read-only memory 半导体器件 集成电路 第2-11部分：数字集成电路 单电源集成电路电可擦可编程只读存储器 空白详细规范 |
China National Standards call |
English PDF |
| GB 14536.19-2006 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated gas valves, including mechanical requirements 家用和类似用途电自动控制器 电动燃气阀的特殊要求，包括机械要求 |
China National Standards call |
English PDF |
| GB 14681.2-2006 |
Electrically heated glazing materials for railway rolling stock and ship Part 2: Electrically heated glazing materials for railway rolling stock 机车船舶用电加温玻璃 第2部分：机车电加温玻璃 |
China National Standards call |
English PDF |
| GB 14681.1-2006 |
Electrically heated glazing materials for locomotives and ships Part 1: Heated glass panes for ships’ rectangular windows 机车船舶用电加温玻璃 第1部分：船用矩形窗电加温玻璃 |
China National Standards call |
English PDF |
| GB/T 3871.14-2006 |
Agricultural tractors - Test procedures - Part 14: Partial power PTO - Non-mechanically transmitted power 农业拖拉机 试验规程 第14部分：非机械式传输的部分功率输出动力输出轴 |
China National Standards call |
English PDF |
| GB/T 17951-2005 |
Standard specification for magnetically hard materials 硬磁材料一般技术条件 |
China National Standards call |
English PDF |
| GB 19880-2005 |
Manual fire call points 手动火灾报警按钮 |
China National Standards call |
English PDF |
| GB/T 1973.3-2005 |
Small cylindrically coiled compression spring—Dimensions and parameters 小型圆柱螺旋压缩弹簧尺寸及参数 |
China National Standards call |
English PDF |
| GB/T 1973.2-2005 |
Small cylindrically coiled tension spring—Dimensions and parameters 小型圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards call |
English PDF |
| GB/T 1973.1-2005 |
Small cylindrically coiled springs—Specification 小型圆柱螺旋弹簧技术条件 |
China National Standards call |
English PDF |
| GB/T 5270-2005 |
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 |
China National Standards call |
English PDF |
| GB/T 19495.8-2004 |
Detection of genetically modified organisms and derived products--Protein based methods 转基因产品检测 蛋白质检测方法 |
China National Standards call |
English PDF |
| GB/T 19495.7-2004 |
Detection of genetically modified organisms and derived products--Methods for sampling and sample preparation 转基因产品检测 抽样和制样方法 |
China National Standards call |
English PDF |
| GB/T 19495.6-2004 |
Detection of genetically modified organisms and derived products--Gene-chip detection 转基因产品检测 基因芯片检测方法 |
China National Standards call |
English PDF |
| Find out:224Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
