Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 25503-2024 |
Requirements for sales and after-sales service of urban gas combustion appliances {译} 城镇燃气燃烧器具销售和售后服务要求 |
China National Standards combustion |
 English PDF |
| GB/T 2820.9-2024 |
Alternating current generator sets driven by reciprocating internal combustion engines - Part 9: Measurement and evaluation of mechanical vibrations {译} 往复式内燃机驱动的交流发电机组-第9部分：机械振动的测量和评价 |
China National Standards combustion |
English PDF |
| GB/T 20064.1-2023 |
Reciprocating internal combustion engines - Handle starters - Part 1: Safety requirements and tests {译} 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 |
China National Standards combustion |
English PDF |
| GB/T 1149.17-2023 |
Internal combustion engines - Piston rings - Part 17: Steel spiral spring oil rings {译} 内燃机 活塞环 第17部分：钢质螺旋撑簧油环 |
China National Standards combustion |
English PDF |
| GB/T 1149.12-2023 |
Internal combustion engines - Piston rings - Part 12: Wedge steel rings {译} 内燃机 活塞环 第12部分：楔形钢环 |
China National Standards combustion |
English PDF |
| GB/T 1149.11-2023 |
Internal combustion engines - Piston rings - Part 11: Wedge cast iron rings {译} 内燃机 活塞环 第11部分：楔形铸铁环 |
China National Standards combustion |
English PDF |
| GB/T 15548-2023 |
General technical conditions for three-phase synchronous generators driven by reciprocating internal combustion engines {译} 往复式内燃机驱动的三相同步发电机通用技术条件 |
China National Standards combustion |
English PDF |
| GB/T 7184-2023 |
Reciprocating internal combustion engine vibration assessment method {译} 往复式内燃机 振动评定方法 |
China National Standards combustion |
English PDF |
| GB/T 23337-2023 |
Internal combustion engine intake and exhaust valves technical conditions {译} 内燃机 进、排气门 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 20787-2023 |
Reciprocating internal combustion engines—Measurement methods for structure-borne noise {译} 往复式内燃机 结构噪声测量方法 |
China National Standards combustion |
English PDF |
| GB/T 15371-2023 |
Reciprocating internal combustion engine - Evaluation method for torsional vibration of crankshaft shafting {译} 往复式内燃机 曲轴轴系扭转振动评定方法 |
China National Standards combustion |
English PDF |
| GB/T 14097-2023 |
Reciprocating internal combustion engines Noise limits {译} 往复式内燃机 噪声限值 |
China National Standards combustion |
English PDF |
| GB/T 6150.4-2023 |
Chemical analysis methods for tungsten concentrates Part 4: Determination of sulfur content High-frequency induction infrared absorption method and combustion-iodometric method {译} 钨精矿化学分析方法 第4部分：硫含量的测定 高频感应红外吸收法和燃烧-碘量法 |
China National Standards combustion |
English PDF |
| GB/T 24748-2023 |
Reciprocating internal combustion engine flywheel technical conditions {译} 往复式内燃机 飞轮 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 42955-2023 |
Determination of total nitrogen content in fertilizers Dumas combustion method {译} 肥料中总氮含量的测定 杜马斯燃烧法 |
China National Standards combustion |
English PDF |
| GB/T 42924.4-2023 |
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomposition method using a cone corrosion meter. {译} 塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法 |
China National Standards combustion |
English PDF |
| GB/T 42924.1-2023 |
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. {译} 塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用 |
China National Standards combustion |
English PDF |
| GB/T 1151-2023 |
Internal combustion engine main bearing bush and connecting rod bearing bush technical specification {译} 内燃机 主轴瓦及连杆轴瓦 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 8190.4-2023 |
Reciprocating internal combustion engines - Emissions measurement - Part 4: Steady-state and transient test cycles for engines of different uses {译} 往复式内燃机 排放测量 第4部分：不同用途发动机的稳态和瞬态试验循环 |
China National Standards combustion |
English PDF |
| GB/T 8190.1-2023 |
Reciprocating internal combustion engines - Emission measurements - Part 1: Test bench measurement systems for gaseous and particulate emissions {译} 往复式内燃机 排放测量 第1部分：气体和颗粒排放物的试验台测量系统 |
China National Standards combustion |
English PDF |
| GB/T 16508.6-2022 |
Shell boilers - Part 6: combustion systems {译} 锅壳锅炉 第6部分：燃烧系统 |
China National Standards combustion |
English PDF |
| GB/T 41517-2022 |
Ships and offshore technology - Ventilation of cargo spaces of vehicles capable of traveling with internal combustion engines - Theoretical calculation of the total airflow demand {译} 船舶和海上技术 可行驶内燃机车辆的货舱的通风 气流总需量的理论计算 |
China National Standards combustion |
English PDF |
| GB/T 41382-2022 |
Fire test open calorimeter method determination of heat release rate and combustion products in fire below 40mW {译} 火灾试验 开放式量热计法 40MW以下火灾热释放速率及燃烧产物的测定 |
China National Standards combustion |
English PDF |
| GB/T 26116-2022 |
Internal combustion engine coaxial pumps—Testing method 内燃机共轴泵 试验方法 |
China National Standards combustion |
English PDF |
| GB/T 24141.2-2022 |
Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards combustion |
English PDF |
| GB/T 41161-2022 |
Reciprocating internal combustion engines—Measurement method for combustion noise 往复式内燃机 燃烧噪声测量方法 |
China National Standards combustion |
English PDF |
| GB/T 5686.7-2022 |
Ferromanganese, manganese silicon alloy, ferromanganese nitride and metal manganese Determination of sulfur content Infrared absorption method and combustion neutralization titration method {译} 锰铁、锰硅合金、氮化锰铁和金属锰 硫含量的测定 红外线吸收法和燃烧中和滴定法 |
China National Standards combustion |
English PDF |
| GB/T 2820.8-2022 |
Alternating generator sets driven by reciprocating internal combustion engines - Part 8: Requirements and tests for low power generator sets {译} 往复式内燃机驱动的交流发电机组 第8部分：对小功率发电机组的要求和试验 |
China National Standards combustion |
English PDF |
| GB/T 2820.1-2022 |
Alternating generator sets driven by reciprocating internal combustion engines - Part 1: Purpose, rating and performance {译} 往复式内燃机驱动的交流发电机组 第1部分：用途、定额和性能 |
China National Standards combustion |
English PDF |
| GB/T 8333-2022 |
Plastics - Test method for combustion behavior of rigid foamed plastics - Vertical combustion method {译} 塑料 硬质泡沫塑料燃烧性能试验方法 垂直燃烧法 |
China National Standards combustion |
English PDF |
| GB/T 42266-2022 |
Flexible porous polymeric materials - Laboratory evaluation of the combustion characteristics of small specimens in the horizontal direction under a small flame {译} 柔性多孔聚合物材料 小试样在小火焰下水平方向燃烧特性的实验室评估 |
China National Standards combustion |
English PDF |
| GB/T 42275-2022 |
Cemented carbide - Determination of total carbon content - High frequency combustion infrared absorption method/thermal conductivity method {译} 硬质合金 总碳量的测定 高频燃烧红外吸收法/热导法 |
China National Standards combustion |
English PDF |
| GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards combustion |
English PDF |
| GB/T 41942-2022 |
Natural raw rubber and natural rubber latex - Determination of nitrogen content - Micro Dumas combustion method {译} 天然生胶和天然胶乳 氮含量的测定 微杜马斯燃烧法 |
China National Standards combustion |
English PDF |
| GB/T 1149.8-2022 |
Internal combustion engines - Piston rings - Part 8: Rectangular steel rings {译} 内燃机 活塞环 第8部分：矩形钢环 |
China National Standards combustion |
English PDF |
| GB/T 25361.1-2022 |
Internal combustion engines - Piston pins - Part 1: Technical requirements {译} 内燃机 活塞销 第1部分：技术要求 |
China National Standards combustion |
English PDF |
| GB/T 21404-2022 |
Internal combustion engines - Methods of determining and measuring engine power - General requirements {译} 内燃机 发动机功率的确定和测量方法 一般要求 |
China National Standards combustion |
English PDF |
| GB/T 8190.6-2022 |
Reciprocating internal combustion engines - Emission measurements - Part 6: Measurement results and test reports {译} 往复式内燃机 排放测量 第6部分：测量结果和试验报告 |
China National Standards combustion |
English PDF |
| GB/T 6730.61-2022 |
Iron ore - Determination of carbon and sulfur content - High frequency combustion infrared absorption method {译} 铁矿石 碳和硫含量的测定 高频燃烧红外吸收法 |
China National Standards combustion |
English PDF |
| GB 14023-2022 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for protection of off-vehicle receivers {译} 车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法 |
China National Standards combustion |
English PDF |
| GB/T 40111-2021 |
Standard test method for fluorine,chlorine and sulfur in petroleum products—combustion-ion chromatography 石油产品中氟、氯和硫含量的测定 燃烧-离子色谱法 |
China National Standards combustion |
English PDF |
| GB/T 39981-2021 |
Building construction machinery and equipment—Portable,hand-held,internal combustion engine driven cut-off machines—Safety requirements 建筑施工机械与设备 便携、手持、内燃机式切割机 安全要求 |
China National Standards combustion |
English PDF |
| GB/T 12773-2021 |
Valve steel and superalloy bars for internal combustion engines 内燃机气阀用钢及合金棒材 |
China National Standards combustion |
English PDF |
| GB/T 8243.12-2021 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分：颗粒计数法滤清效率和容灰量 |
China National Standards combustion |
English PDF |
| GB/T 12786-2021 |
General technical conditions for automatic internal combustion engine power stations 自动化内燃机电站通用技术条件 |
China National Standards combustion |
English PDF |
| GB/T 6809.12-2021 |
Reciprocating internal combustion engines—Vocabulary of components and systems—Part 12:Exhaust emission control systems 往复式内燃机 零部件和系统术语 第12部分：排放控制系统 |
China National Standards combustion |
English PDF |
| GB/T 17650.2-2021 |
Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity 取自电缆或光缆的材料燃烧时释出气体的试验方法 第2部分：酸度（用pH测量）和电导率的测定 |
China National Standards combustion |
English PDF |
| GB/T 17650.1-2021 |
Test on gases evolved during combustion of materials from cables or optical fiber cables-Part 1:Determination of the halogen acid gas content 取自电缆或光缆的材料燃烧时释出气体的试验方法 第1部分：卤酸气体总量的测定 |
China National Standards combustion |
English PDF |
| GB/T 39836-2021 |
Test methods for slagging indexes in coal combustion 煤的燃烧结渣指数测定方法 |
China National Standards combustion |
English PDF |
| GB/T 39833-2021 |
Test method for coal combustion characteristics—One-dimensional furnaces method 煤的燃烧特性测定方法 一维炉法 |
China National Standards combustion |
English PDF |
| GB/T 1149.6-2021 |
Internal combustion engines—Piston rings—Part 6: Scraper rings made of cast iron 内燃机 活塞环 第6部分：铸铁刮环 |
China National Standards combustion |
English PDF |
| GB/T 1149.4-2021 |
Internal combustion engines—Piston rings—Part 4:Quality requirements 内燃机 活塞环 第4部分：质量要求 |
China National Standards combustion |
English PDF |
| GB/T 41067-2021 |
Nanotechnologies -- Determination of sulfur, fluorine, chlorine and bromine content in graphene related powder -- combustion ion chromatography method 纳米技术 石墨烯粉体中硫、氟、氯、溴含量的测定 燃烧离子色谱法 |
China National Standards combustion |
English PDF |
| GB/T 20969.4-2021 |
Special environmental condition—Machinery for plateau—Part 4:Guide rule of test for plateau natural environment—Internal combustion engines 特殊环境条件 高原机械 第4部分：高原自然环境试验导则 内燃动力机械 |
China National Standards combustion |
English PDF |
| GB/T 20969.1-2021 |
Special environmental condition—Machinery for plateau—Part 1: Requirements for internal combustion engines on plateau 特殊环境条件 高原机械 第1部分：高原对内燃动力机械的要求 |
China National Standards combustion |
English PDF |
| GB/T 13697-2021 |
Determination of carbon in uranium oxide powder and pellets—High-frequency inductive furnace combustion-infrared detection method 二氧化铀粉末和芯块中碳的测定 高频感应炉燃烧-红外检测法 |
China National Standards combustion |
English PDF |
| GB/T 38750.2-2020 |
Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 2:Gasoline engines 往复式内燃机能效评定规范 第2部分：汽油机 |
China National Standards combustion |
English PDF |
| GB/T 38750.1-2020 |
Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 1:Diesel engines 往复式内燃机能效评定规范 第1部分：柴油机 |
China National Standards combustion |
English PDF |
| GB/T 20888.1-2020 |
Machinery for forestry—Safety requirements and testing for pole-mounted powered pruners—Part 1: Machines fitted with an integral combustion engine 林业机械 杆式动力修枝锯安全要求和试验 第1部分：侧挂式动力修枝锯 |
China National Standards combustion |
English PDF |
| GB/T 19725.1-2020 |
Agricultural and forestry machinery—Safety requirements and testing for portable,hand-held,powered brush-cutters and grass-trimmers—Part 1:Machines fitted with an integral combustion engine 农林机械 便携式割灌机和割草机安全要求和试验 第1部分：侧挂式动力机械 |
China National Standards combustion |
English PDF |
| GB/T 8243.14-2020 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法 第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验 |
China National Standards combustion |
English PDF |
| GB/T 3221-2020 |
Code for mooring and sea trials of internal combustion engine-driven inland ships 内燃机动力内河船舶系泊和航行试验大纲 |
China National Standards combustion |
English PDF |
| GB/T 38364.3-2019 |
Garden equipment—Safety requirements for combustion-engine-powered lawnmowers—Part 3: Ride-on lawnmowers with seated operator 园林机械 以内燃机为动力的草坪修剪机安全要求 第3部分：坐骑式草坪修剪机 |
China National Standards combustion |
English PDF |
| GB/T 38364.2-2019 |
Garden equipment—Safety requirements for combustion-engine-powered lawnmowers—Part 2:Pedestrian-controlled lawnmowers 园林机械 以内燃机为动力的草坪修剪机安全要求 第2部分：步进式草坪修剪机 |
China National Standards combustion |
English PDF |
| GB/T 38364.1-2019 |
Garden equipment—Safety requirements for combustion-engine-powered lawnmowers—Part 1:Terminology and common tests 园林机械 以内燃机为动力的草坪修剪机安全要求 第1部分：术语和通用试验 |
China National Standards combustion |
English PDF |
| GB/T 38340-2019 |
Small craft—Reciprocating internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions 小艇 往复式内燃机排放测量 气体和颗粒排放物的试验台测量 |
China National Standards combustion |
English PDF |
| GB/T 37865-2019 |
Analysis method of 14C in biological samples—Oxgen bomb combustion method 生物样品中14C的分析方法 氧弹燃烧法 |
China National Standards combustion |
English PDF |
| GB/T 37588-2019 |
Carbon materials—Determination of nitrogen content—Dumas combustion method 炭素材料 氮含量的测定 杜马斯燃烧法 |
China National Standards combustion |
English PDF |
| GB/T 37650-2019 |
combustion types—Terms and definitions 燃烧方式 术语和定义 |
China National Standards combustion |
English PDF |
| GB/T 37296-2019 |
Safety design code for reciprocating internal combustion engine gas power plant 往复式内燃燃气电站安全设计规范 |
China National Standards combustion |
English PDF |
| GB/T 6809.11-2018 |
Reciprocating internal combustion engines—Vocabulary of components and systems—Part 11: Fuel systems 往复式内燃机-零部件和系统术语-第11部分：燃油系统 |
China National Standards combustion |
English PDF |
| GB/T 37089-2018 |
Reciprocating internal combustion engine driven alternating current generating sets—Controller 往复式内燃机驱动的交流发电机组-控制器 |
China National Standards combustion |
English PDF |
| GB/T 20651.1-2018 |
Reciprocating internal combustion engines—Safety—Part 1: Compression ignition engines 往复式内燃机-安全-第1部分：压燃式发动机 |
China National Standards combustion |
English PDF |
| GB/T 14906-2018 |
Classification of internal combustion engine oils viscosity 内燃机油黏度分类 |
China National Standards combustion |
English PDF |
| GB/T 6809.10-2018 |
Reciprocating internal combustion engines—Vocabulary of components and systems—Part 10: Ignition systems 往复式内燃机-零部件和系统术语-第10部分：点火系统 |
China National Standards combustion |
English PDF |
| GB/T 8190.8-2018 |
Reciprocating internal combustion engines—Exhaust emission measurement—Part 8：Engine group determination 往复式内燃机-排放测量-第8部分：发动机系组的确定 |
China National Standards combustion |
English PDF |
| GB/T 1147.1-2017/XG1-2018 |
Small and medium power internal combustion engines - Part 1：General requirements 《中小功率内燃机-第1部分：通用技术条件》国家标准第1号修改单 |
China National Standards combustion |
English PDF |
| GB/T 18655-2018 |
Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 |
China National Standards combustion |
English PDF |
| GB/T 36791-2018 |
Determination of bromine in organic flame retardant—Oxygen bomb combustion-ion selective electrode method 含溴有机阻燃化学品中溴含量的测定 氧弹燃烧-离子选择电极法 |
China National Standards combustion |
English PDF |
| GB/T 14097-2018 |
Reciprocating internal combustion engines—Limit values of emitted noise 往复式内燃机 噪声限值 |
China National Standards combustion |
English PDF |
| GB/T 23340-2018 |
Internal combustion engines—Connecting-rods—Specification 内燃机 连杆 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 8243.5-2018 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability 内燃机全流式机油滤清器试验方法 第5部分：冷起动模拟和液压脉冲耐久试验 |
China National Standards combustion |
English PDF |
| GB/T 23338-2018 |
Internal combustion engines—Charge air coolers—Specification 内燃机 增压空气冷却器 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 23339-2018 |
Internal combustion engines—Crankshafts—Specification 内燃机 曲轴 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 8243.15-2018 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分：复合材料滤清器的振动疲劳试验 |
China National Standards combustion |
English PDF |
| GB/T 8190.7-2018 |
Reciprocating internal combustion engines—Exhaust emission measurement—Part 7：Engine family determination 往复式内燃机 排放测量 第7部分：发动机系族的确定 |
China National Standards combustion |
English PDF |
| GB/T 34615-2017 |
Determination of combustion characteristics of CMSW for coprocessing in cement kiln 水泥窑协同处置的生活垃圾预处理可燃物燃烧特性检测方法 |
China National Standards combustion |
English PDF |
| GB/T 10574.12-2017 |
Methods for chemical analysis of tin-lead solders—Part 12：Determination of sulfur content—High frequency combustion with infrared absorption method 锡铅焊料化学分析方法 第12部分：硫量的测定 高频燃烧红外吸收光谱法 |
China National Standards combustion |
English PDF |
| GB/T 1819.10-2017 |
Methods for chemical analysis of tin concentrates—Part 10: Determination of sulfur content—High frequency combustion with infrared absorption method and potassium iodate titrimetric method 锡精矿化学分析方法 第10部分：硫量的测定 高频感应炉燃烧红外吸收法和碘酸钾滴定法 |
China National Standards combustion |
English PDF |
| GB/T 13747.24-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 24：Determination of carbon content—Infrared absorption method after high frequency combustion 锆及锆合金化学分析方法 第24部分：碳量的测定 高频燃烧红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 5195.5-2017 |
Fluorspar—Determination of total sulfur content—Pipe furnace combustion iodic acid potassium titration method 萤石 总硫含量的测定 管式炉燃烧-碘酸钾滴定法 |
China National Standards combustion |
English PDF |
| GB/T 18948-2017 |
Rubber hoses and tubing for cooling systems for internal-combustion engines—Specification 内燃机冷却系统用橡胶软管和纯胶管 规范 |
China National Standards combustion |
English PDF |
| GB/T 34231-2017 |
Determination of loss on ignition for coal combustion residues 煤炭燃烧残余物烧失量测定方法 |
China National Standards combustion |
English PDF |
| GB/T 33928-2017 |
Reciprocating internal combustion engines—Measurement method for exhaust silencers—Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio 往复式内燃机 排气消声器测量方法 声压法排气噪声声功率级和插入损失及功率损失比 |
China National Standards combustion |
English PDF |
| GB/T 1149.15-2017 |
Internal combustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron 内燃机 活塞环 第15部分：薄型铸铁螺旋撑簧油环 |
China National Standards combustion |
English PDF |
| GB/T 8190.9-2017 |
Reciprocating internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards combustion |
English PDF |
| GB/T 8188-2017 |
Reciprocating internal combustion engines—Emissions terminology and nomenclature 往复式内燃机 排放术语和定义 |
China National Standards combustion |
English PDF |
| GB/T 33618-2017 |
Textiles—Test method for visible smoke release and heat release properties during combustion process 纺织品 燃烧烟释放和热释放性能测试 |
China National Standards combustion |
English PDF |
| GB/T 8243.7-2017 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 7：Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分：振动疲劳试验 |
China National Standards combustion |
English PDF |
| GB/T 8243.6-2017 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 |
China National Standards combustion |
English PDF |
| GB/T 1859.4-2017 |
Reciprocating internal combustion engines—Measurement of sound power levels using sound pressure—Part 4:Survey method using a reference sound source 往复式内燃机 声压法声功率级的测定 第4部分：使用标准声源简易法 |
China National Standards combustion |
English PDF |
| GB/T 1147.1-2017 |
Small and medium power internal combustion engines—Part 1: General requirements 中小功率内燃机 第1部分：通用技术条件 |
China National Standards combustion |
English PDF |
| GB/T 1147.2-2017 |
Small and medium power internal combustion engines—Part 2: Test methods 中小功率内燃机 第2部分：试验方法 |
China National Standards combustion |
English PDF |
| GB/T 35211-2017 |
Measurement of nature gas calorific value—Continuous combustion 天然气发热量的测量 连续燃烧法 |
China National Standards combustion |
English PDF |
| GB/T 34692-2017 |
Thermoplastic elastomer—Determination of halogen—Oxygen bomb combustion-ion chromatography 热塑性弹性体 卤素含量的测定 氧弹燃烧-离子色谱法 |
China National Standards combustion |
English PDF |
| GB/T 33304-2016 |
Testing method of combustion characteristics of coal—Thermogravimetric analysis 煤炭燃烧特性试验方法 热重分析法 |
China National Standards combustion |
English PDF |
| GB/T 33302-2016 |
The test method of the emission of sulfur during coal combustion 燃煤可排放硫含量试验方法 |
China National Standards combustion |
English PDF |
| GB/T 33347-2016 |
Reciprocating internal combustion gas generating set—Classification and constituent analysis of gas fuels 往复式内燃燃气发电机组 气体燃料分类及组分分析方法 |
China National Standards combustion |
English PDF |
| GB/T 33349-2016 |
General specification for gas electric power plant system with reciprocating internal combustion engines 往复式内燃燃气电站系统通用技术条件 |
China National Standards combustion |
English PDF |
| GB/T 33340-2016 |
Reciprocating internal combustion gas generating set－Technical code on safety 往复式内燃燃气发电机组 安全设计规范 |
China National Standards combustion |
English PDF |
| GB/T 6809.5-2016 |
Reciprocating internal combustion engines—Vocabulary of components and systems—Part 5: Cooling systems 往复式内燃机 零部件和系统术语 第5部分：冷却系统 |
China National Standards combustion |
English PDF |
| GB/T 32573-2016 |
Silicon powder—Determination of total carbon content—Infrared absorption method after combustion in an induction furnace 硅粉 总碳含量的测定 感应炉内燃烧后红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 8243.13-2015 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 |
China National Standards combustion |
English PDF |
| GB/T 3821-2015 |
Small and medium power internal combustion engines—Cleanliness limits and measurements 中小功率内燃机 清洁度限值和测定方法 |
China National Standards combustion |
English PDF |
| GB/T 32222-2015 |
Remanufactured internal combustion engine—General specifications 再制造内燃机 通用技术条件 |
China National Standards combustion |
English PDF |
| GB/T 26950.2-2015 |
Explosive-proof industrial trucks—Part 2: Internal combustion industrial trucks 防爆工业车辆 第2部分：内燃工业车辆 |
China National Standards combustion |
English PDF |
| GB/T 20064.1-2015 |
Reciprocating internal combustion engines—Handle starting equipment—Part 1: Safety requirements and tests 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 |
China National Standards combustion |
English PDF |
| GB/T 1859.3-2015 |
Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 3: Precision methods for hemi-anechoic rooms 往复式内燃机 声压法声功率级的测定 第3部分：半消声室精密法 |
China National Standards combustion |
English PDF |
| GB/T 1859.2-2015 |
Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 2: Survey method 往复式内燃机 声压法声功率级的测定 第2部分：简易法 |
China National Standards combustion |
English PDF |
| GB/T 1859.1-2015 |
Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 1: Engineering method 往复式内燃机 声压法声功率级的测定 第1部分：工程法 |
China National Standards combustion |
English PDF |
| GB/T 1149.16-2015 |
Internal combustion engines—Piston rings—Part 16: Expander/segment oil-control rings 内燃机 活塞环 第16部分：钢带组合油环 |
China National Standards combustion |
English PDF |
| GB/T 32037-2015 |
Evaluation method of combustion and energy saving for industrial furnace 工业窑炉燃烧节能评价方法 |
China National Standards combustion |
English PDF |
| GB/T 31553-2015 |
External combustion hot blast cupola 外热风冲天炉 |
China National Standards combustion |
English PDF |
| GB/T 31578-2015 |
Inspection of grain and oils—Determination of crude protein content in grain and its products—combustion method according to the Dumas principle 粮油检验 粮食及制品中粗蛋白测定 杜马斯燃烧法 |
China National Standards combustion |
English PDF |
| GB/T 31099-2014 |
Specifications of sulfur fixation agent during coal combustion 燃煤固硫剂技术条件 |
China National Standards combustion |
English PDF |
| GB/T 31098-2014 |
Evaluation on the effect of sulfur fixation during coal combustion 燃煤固硫效果评价方法 |
China National Standards combustion |
English PDF |
| GB/T 31097-2014 |
Performance evaluation of coal combustion-aid additives for coal 燃煤助燃剂助燃效果评价方法 |
China National Standards combustion |
English PDF |
| GB/T 31096-2014 |
Specifications of coal combustion-aid additives 燃煤助燃剂技术条件 |
China National Standards combustion |
English PDF |
| GB/T 31292-2014 |
Carbon fibre―Determination of carbon content―combustion absorption method 碳纤维 碳含量的测定 燃烧吸收法 |
China National Standards combustion |
English PDF |
| GB/T 6730.17-2014 |
Iron ores―Determination of sulfur content―combustion iodometric method 铁矿石 硫含量的测定 燃烧碘量法 |
China National Standards combustion |
English PDF |
| GB/T 3286.7-2014 |
Methods for chemical analysis of limestone and dolomite―Part 7: The determination of sulphur content―The pipe furnace combustion iodic acid potassium titration method，the high frequency combustion with infrared absorption method and the barium sulfa 石灰石及白云石化学分析方法 第7部分：硫含量的测定 管式炉燃烧-碘酸钾滴定法、高频燃烧红外吸收法和硫酸钡重量法 |
China National Standards combustion |
English PDF |
| GB 19725.1-2014 |
Agricultural and forestry machinery―Safety requirements and testing for portable,hand-held,powered brush-cutters and grass-trimmers―Part 1: Machines fitted with an integral combustion engine 农林机械 便携式割灌机和割草机安全要求和试验 第1部分：侧挂式动力机械 |
China National Standards combustion |
English PDF |
| GB/T 5395-2014 |
Forestry and gardening machinery—Vibration test code for portable hand-held machines with internal combustion engine—Vibration at the handles 林业及园林机械 以内燃机为动力的便携式手持操作机械振动测定规范 手把振动 |
China National Standards combustion |
English PDF |
| GB 20651.2-2014 |
Reciprocating internal combustion engines―safety―Part 2: Spark ignition engines 往复式内燃机 安全 第2部分：点燃式发动机 |
China National Standards combustion |
English PDF |
| GB/T 14403-2014 |
Test method for combustion heat release of building materials 建筑材料燃烧释放热量试验方法 |
China National Standards combustion |
English PDF |
| GB/T 7631.17-2014 |
Lubricants,industrial oils and related products(class L)-Classification—Part 17: Family E(Internal combustion engine oils) 润滑剂、工业用油和相关产品（L类）的分类 第17部分：E组(内燃机油) |
China National Standards combustion |
English PDF |
| GB 20888.1-2013 |
Machinery for forestry―Safety requirements and testing for pole-mounted powered pruners―Part 1: Machines fitted with an integral combustion engine 林业机械 杆式动力修枝锯安全要求和试验 第1部分：侧挂式动力修枝锯 |
China National Standards combustion |
English PDF |
| GB/T 6809.9-2013 |
Reciprocating internal combustion engines―Vocabulary of components and systems―Part 9: Control and monitoring systems 往复式内燃机 零部件和系统术语 第9部分：监控系统 |
China National Standards combustion |
English PDF |
| GB/T 6809.3-2013 |
Reciprocating internal combustion engines―Vocabulary of components and systems―Part 3: Main running gear 往复式内燃机 零部件和系统术语 第3部分：主要运动件 |
China National Standards combustion |
English PDF |
| GB/T 6809.2-2013 |
Reciprocating internal combustion engines—Vocabulary of components and systems—Part 2: Valves,camshaft drives and actuating mechanisms 往复式内燃机 零部件和系统术语 第2部分：气门、凸轮轴传动和驱动机构 |
China National Standards combustion |
English PDF |
| GB/T 5390-2013 |
Forestry and garden machinery―Noise test code for portable hand-held machines with internal combustion engine―Engineering method（Grade 2 accuracy） 林业及园林机械 以内燃机为动力的便携式手持操作机械噪声测定规范 工程法(2级精度) |
China National Standards combustion |
English PDF |
| GB/T 30462-2013 |
Remanufactured non-road internal combustion engines―General specifications 再制造非道路用内燃机 通用技术条件 |
China National Standards combustion |
English PDF |
| GB/T 1149.12-2013 |
Internal combustion engines―Piston rings―Part 12: Half keystone rings made of steel 内燃机 活塞环 第12部分：楔形钢环 |
China National Standards combustion |
English PDF |
| GB/T 1149.10-2013 |
Internal combustion engines-Piston rings―Part 10: Keystone rings made of steel 内燃机 活塞环 第10部分：梯形钢环 |
China National Standards combustion |
English PDF |
| GB/T 16508.6-2013 |
Shell boilers―Part 6: combustion systems 锅壳锅炉 第6部分：燃烧系统 |
China National Standards combustion |
English PDF |
| GB/T 30163-2013 |
Specifications of top combustion stove with high efficiency and high blast temperature for blast furnace 高炉用高风温顶燃式热风炉节能技术规范 |
China National Standards combustion |
English PDF |
| GB/T 30138-2013 |
Design code for exhaust and cooling water heat recovery system of gas electric power plant with reciprocating internal combustion engines 往复式内燃燃气电站余热利用系统设计规范 |
China National Standards combustion |
English PDF |
| GB/T 29652-2013 |
Direct reduced iron - Determination of carbon and sulfur - High frequency combustion with infrared absorption method 直接还原铁 碳和硫含量的测定 高频燃烧红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 4325.21-2013 |
Methods for chemical analysis of molybdenum - Part 21: Determination of carbon content and sulfur content - High frequency combustion-infrared absorption method 钼化学分析方法 第21部分：碳量和硫量的测定 高频燃烧红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 8151.2-2012 |
Methods for chemical analysis of zinc concentrates - Part 2：Determination of sulfur content - The combustion neutralization titrimetric method 锌精矿化学分析方法 第2部分：硫量的测定 燃烧中和滴定法 |
China National Standards combustion |
English PDF |
| GB/T 4324.27-2012 |
Methods for chemical analysis of tungsten - Part 27:：Determination of carbon content - High frequency combustion-infrared absorption method 钨化学分析方法 第27部分：碳量的测定 高频燃烧红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 4324.23-2012 |
Methods for chemical analysis of tungsten - Part 23: Determination of sulfur content - The combustion-conductometric titration and high frequency combustion-infrared absorption method 钨化学分析方法 第23部分：硫量的测定 燃烧电导法和高频燃烧红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 3884.3-2012 |
Methods for chemical analysis of copper concentrates - Part 3: Determination of sulfur content - Gravimetric method and combustion-titration method 铜精矿化学分析方法 第3部分：硫量的测定 重量法和燃烧-滴定法 |
China National Standards combustion |
English PDF |
| GB/T 28950.2-2012 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components 道路车辆和内燃机 滤清器名词术语 第2部分：滤清器及其部件性能指标定义 |
China National Standards combustion |
English PDF |
| GB/T 28950.1-2012 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components 道路车辆和内燃机 滤清器名词术语 第1部分：滤清器和滤清器部件定义 |
China National Standards combustion |
English PDF |
| GB/T 28949-2012 |
Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing 内燃机和空气压缩机用进气空气滤清器 性能试验 |
China National Standards combustion |
English PDF |
| GB/T 1151-2012 |
Internal combustion engines - Main and connecting rod bearings - Specifications 内燃机 主轴瓦及连杆轴瓦 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 28772-2012 |
Classification of internal combustion engine oils 内燃机油分类 |
China National Standards combustion |
English PDF |
| GB/T 2820.11-2012 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods 往复式内燃机驱动的交流发电机组 第11部分：旋转不间断电源 性能要求和试验方法 |
China National Standards combustion |
English PDF |
| GB/T 6072.4-2012 |
Reciprocating internal combustion engines - Performance - Part 4: Speed governing 往复式内燃机 性能 第4部分：调速 |
China National Standards combustion |
English PDF |
| GB/T 8243.9-2012 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests 内燃机全流式机油滤清器试验方法 第9部分：进、出口止回阀试验 |
China National Standards combustion |
English PDF |
| GB/T 27713-2011 |
Calculation method of energy equilibrium and energy efficiency in alkali recovery combustion system of non-wood pulp 非木浆碱回收燃烧系统能量平衡及能量效率计算方法 |
China National Standards combustion |
English PDF |
| GB/T 11060.7-2011 |
Natural gas - Determination of sulfur compounds - Part 7: Determination of total sulfur content by Lingener combustion method 天然气 含硫化合物的测定 第7部分：用林格奈燃烧法测定总硫含量 |
China National Standards combustion |
English PDF |
| GB 14023-2011 |
Vehicles, boats and internal combustion engine - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法 |
China National Standards combustion |
English PDF |
| GB/T 8190.5-2011 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels 往复式内燃机 排放测量 第5部分：试验燃料 |
China National Standards combustion |
English PDF |
| GB/T 8190.2-2011 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site 往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量 |
China National Standards combustion |
English PDF |
| GB/T 4497.1-2010 |
Rubber - Determination of total sulfur content - Part 1：Oxygen combustion flask method 橡胶 全硫含量的测定 第1部分：氧瓶燃烧法 |
China National Standards combustion |
English PDF |
| GB/T 26116-2010 |
Internal combustion engine coaxial pump test method 内燃机共轴泵 试验方法 |
China National Standards combustion |
English PDF |
| GB/T 25773-2010 |
Fusion welding specifications for combustion engine 燃气机熔化焊技术规范 |
China National Standards combustion |
English PDF |
| GB/T 18655-2010 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 |
China National Standards combustion |
English PDF |
| GB/T 8190.9-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards combustion |
English PDF |
| GB/T 8190.4-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications 往复式内燃机 排放测量 第4部分：不同用途发动机的稳态试验循环 |
China National Standards combustion |
English PDF |
| GB/T 8190.1-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions 往复式内燃机 排放测量 第1部分：气体和颗粒排放物的试验台测量 |
China National Standards combustion |
English PDF |
| GB/T 8190.10-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第10部分：压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程 |
China National Standards combustion |
English PDF |
| GB/T 6809.8-2010 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems 往复式内燃机 零部件和系统术语 第8部分：起动系统 |
China National Standards combustion |
English PDF |
| GB/T 6809.5-2010 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems 往复式内燃机 零部件和系统术语 第5部分：冷却系统 |
China National Standards combustion |
English PDF |
| GB/T 25361.2-2010 |
Internal combustion engines - Piston pins - Part 2: Inspection measuring principles 内燃机 活塞销 第2部分：检验规则 |
China National Standards combustion |
English PDF |
| GB/T 25361.1-2010 |
Internal combustion engines - Piston pins - Part 1: General specifications 内燃机 活塞销 第1部分：技术要求 |
China National Standards combustion |
English PDF |
| GB/T 1150-2010 |
Internal combustion engines - Cast iron wet cylinder liners - Specifications 内燃机 湿式铸铁气缸套 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 1149.7-2010 |
Internal combustion engines - Piston rings - Part 7: Rectangular rings made of cast iron 内燃机 活塞环 第7部分：矩形铸铁环 |
China National Standards combustion |
English PDF |
| GB/T 1149.3-2010 |
Internal combustion engines - Piston rings - Part 3: Material specifications 内燃机 活塞环 第3部分：材料规范 |
China National Standards combustion |
English PDF |
| GB/T 1149.2-2010 |
Internal combustion engines - Piston rings - Part 2: Vocabulary 内燃机 活塞环 第2部分：术语 |
China National Standards combustion |
English PDF |
| GB/T 1149.11-2010 |
Internal combustion engines - Piston rings - Part 11: Half keystone rings made of cast iron 内燃机 活塞环 第11部分：楔形铸铁环 |
China National Standards combustion |
English PDF |
| GB/T 1148-2010 |
Internal combustion engines - Aluminium pistons - Specifications 内燃机 铝活塞 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 24748-2009 |
Reciprocating internal combustion engines - Flywheels - General specifications 往复式内燃机 飞轮 技术条件 |
China National Standards combustion |
English PDF |
| GB/T 223.86-2009 |
Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace 钢铁及合金 总碳含量的测定 感应炉燃烧后红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 223.85-2009 |
Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace 钢铁及合金 硫含量的测定 感应炉燃烧后红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 223.83-2009 |
Steel and iron - Determination of high sulfur content - Infrared absorption method after combustion in an induction furnace 钢铁及合金 高硫含量的测定 感应炉燃烧后红外吸收法 |
China National Standards combustion |
English PDF |
| GB/T 24318-2009 |
Determination of total nitrogen content in animal feeding stuffs by combustion according to the dumas principle and calculation of the crude protein content 杜马斯燃烧法测定饲料原料中总氮含量及粗蛋白质的计算 |
China National Standards combustion |
English PDF |
| GB/T 8704.3-2009 |
Ferrovanadium - Determination of sulfur content - The infrared absorption method and the combustion-neutralization titration method 钒铁 硫含量的测定 红外线吸收法及燃烧中和滴定法 |
China National Standards combustion |
English PDF |
| GB/T 24224-2009 |
Chromium ores - Determination of sulfur content - combustion-neutralization titration method, combustion-potassium iodate titration method and combustion-infrared absorption method 铬矿石 硫含量的测定 燃烧-中和滴定法、燃烧-碘酸钾滴定法和燃烧-红外线吸收法 |
China National Standards combustion |
English PDF |
| GB/T 24141.2-2009 |
Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards combustion |
English PDF |
| GB/T 24141.1-2009 |
Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第1部分：柴油燃料 |
China National Standards combustion |
English PDF |
| GB/T 24140-2009 |
Rubber hose and tubing for air and vacuum systems for internal-combustion engines - Specification 内燃机空气和真空系统用橡胶软管和纯胶管 规范 |
China National Standards combustion |
English PDF |
| GB/T 18948-2009 |
Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification 内燃机冷却系统用橡胶软管和纯胶管 规范 |
China National Standards combustion |
English PDF |
| GB/T 2820.6-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods 往复式内燃机驱动的交流发电机组 第6部分：试验方法 |
China National Standards combustion |
English PDF |
| GB/T 2820.5-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets 往复式内燃机驱动的交流发电机组 第5部分：发电机组 |
China National Standards combustion |
English PDF |
| GB/T 2820.4-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Controlgear and switchgear 往复式内燃机驱动的交流发电机组 第4部分：控制装置和开关装置 |
China National Standards combustion |
English PDF |
| GB/T 2820.3-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets 往复式内燃机驱动的交流发电机组 第3部分：发电机组用交流发电机 |
China National Standards combustion |
English PDF |
| GB/T 2820.2-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines 往复式内燃机驱动的交流发电机组 第2部分：发动机 |
China National Standards combustion |
English PDF |
| Find out:323Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
