China National Standards

China dimensional GB Standards List


  •  China "dimensional" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 3880.3-2024 Aluminium and aluminium alloy plates and strips for general industrial use - Part 3: dimensional deviation {译}
    一般工业用铝及铝合金板、带材-第3部分:尺寸偏差
    China National Standards
    dimensional

    English PDF
    GB/T 4074.2-2024 Test methods for winding wires - Part 2: dimensional measurements {译}
    绕组线试验方法-第2部分:尺寸测量
    China National Standards
    dimensional

    English PDF
    GB/T 43661-2024 Surface chemical analysis - Scanning probe microscopy - Definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPM, such as SSRM and SCM) for two-dimensional imaging of dopants, etc. {译}
    表面化学分析-扫描探针显微术-用于二维掺杂物成像等用途的电扫描探针显微镜(ESPM,如SSRM和SCM)空间分辨的定义和校准
    China National Standards
    dimensional

    English PDF
    GB/Z 43684-2024 Nanotechnology - Description, measurement and dimensional quality parameters of gratings {译}
    纳米技术-光栅的描述、测量和尺寸质量参数
    China National Standards
    dimensional

    English PDF
    GB/T 43551-2023 Civil unmanned aircraft system identification three-dimensional space location identification coding {译}
    民用无人驾驶航空器系统身份识别 三维空间位置标识编码
    China National Standards
    dimensional

    English PDF
    GB/T 43536.2-2023 Three-dimensional integrated circuits Part 2: Calibration requirements for fine-pitch stacked chips {译}
    三维集成电路 第2部分:微间距叠层芯片的校准要求
    China National Standards
    dimensional

    English PDF
    GB/T 43536.1-2023 Three-dimensional integrated circuits Part 1: Terms and definitions {译}
    三维集成电路 第1部分:术语和定义
    China National Standards
    dimensional

    English PDF
    GB/Z 43510-2023 Guide to Reliability Test Methods for Integrated Circuit TSV Three-dimensional Packages {译}
    集成电路TSV三维封装可靠性试验方法指南
    China National Standards
    dimensional

    English PDF
    GB/T 43199-2023 Robot multi-dimensional force/torque sensor detection specifications {译}
    机器人多维力/力矩传感器检测规范
    China National Standards
    dimensional

    English PDF
    GB/T 42711-2023 Three-dimensional parking garage wireless power supply system technical requirements and test specifications {译}
    立体停车库无线供电系统 技术要求及测试规范
    China National Standards
    dimensional

    English PDF
    GB/T 42869-2023 Requirements for simplification and lightweighting of three-dimensional models of mechanical products {译}
    机械产品三维模型简化与轻量化要求
    China National Standards
    dimensional

    English PDF
    GB/T 15879.604-2023 Mechanical standardization of semiconductor devices - Part 6-4: General rules for drawing outline drawings of surface mount semiconductor device packages - dimensional measurement methods for ball array (BGA) packages {译}
    半导体器件的机械标准化 第6-4部分:表面安装半导体器件封装外形图绘制的一般规则 焊球阵列(BGA)封装的尺寸测量方法
    China National Standards
    dimensional

    English PDF
    GB/T 41415-2022 Textiles - Determination of dimensional change rate under dry, wet and hot conditions {译}
    纺织品 干湿热条件下尺寸变化率的测定
    China National Standards
    dimensional

    English PDF
    GB/T 41158.7-2022 Three-dimensional process planning for mechanical products—Part 7: Distribution requirements
    机械产品三维工艺设计 第7部分:发放要求
    China National Standards
    dimensional

    English PDF
    GB/T 41158.3-2022 Three-dimensional process planning for mechanical products—Part 3: Model building
    机械产品三维工艺设计 第3部分:模型构建
    China National Standards
    dimensional

    English PDF
    GB/T 41158.4-2022 Three-dimensional process planning for mechanical products—Part 4:Process symbol and annotation
    机械产品三维工艺设计 第4部分:工艺符号与标注
    China National Standards
    dimensional

    English PDF
    GB/T 41158.6-2022 Three-dimensional process planning for mechanical products—Part 6:Data requirements
    机械产品三维工艺设计 第6部分:数据要求
    China National Standards
    dimensional

    English PDF
    GB/T 41158.5-2022 Three-dimensional process planning for mechanical products—Part 5:Detailed design
    机械产品三维工艺设计 第5部分:详细设计
    China National Standards
    dimensional

    English PDF
    GB/T 41158.1-2022 Three-dimensional process planning for mechanical products—Part 1:Terms and definitions
    机械产品三维工艺设计 第1部分:术语和定义
    China National Standards
    dimensional

    English PDF
    GB/T 41158.2-2022 Three-dimensional process planning for mechanical products—Part 2:General requirements
    机械产品三维工艺设计 第2部分:通用要求
    China National Standards
    dimensional

    English PDF
    GB/T 19367-2022 dimensional determination of wood-based panels {译}
    人造板的尺寸测定
    China National Standards
    dimensional

    English PDF
    GB/T 42106-2022 Nanotechnology Three-dimensional nanostructures and device processing methods Ion beam irradiation-induced strain method {译}
    纳米技术 三维纳米结构与器件的加工方法 离子束辐照诱导应变法
    China National Standards
    dimensional

    English PDF
    GB/T 41739-2022 Test method for dimensional stability of metal matrix composites—Cold and heat cycle method {译}
    金属基复合材料尺寸稳定性检测方法 冷热循环法
    China National Standards
    dimensional

    English PDF
    GB/T 42124.1-2022 Geometric product specification (GPS) dimensional and geometric tolerances of molded parts - Part 1: Vocabulary {译}
    产品几何技术规范(GPS) 模制件的尺寸和几何公差 第1部分:词汇
    China National Standards
    dimensional

    English PDF
    GB/T 40139-2021 Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging
    材料表面积的测量 高光谱成像三维面积测量法
    China National Standards
    dimensional

    English PDF
    GB/T 40204-2021 General rules of two dimensional barcodes for traceability
    追溯二维码技术通则
    China National Standards
    dimensional

    English PDF
    GB/T 40128-2021 Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets
    表面化学分析 原子力显微术 二硫化钼片层材料厚度测量方法
    China National Standards
    dimensional

    English PDF
    GB/T 40071-2021 Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Optical contrast method
    纳米技术 石墨烯相关二维材料的层数测量 光学对比度法
    China National Standards
    dimensional

    English PDF
    GB/T 40069-2021 Nanotechnologies—Measurement of the number of layers of graphene-related two-dimensional (2D) materials—Raman spectroscopy method
    纳米技术 石墨烯相关二维材料的层数测量 拉曼光谱法
    China National Standards
    dimensional

    English PDF
    GB/T 39833-2021 Test method for coal combustion characteristics—One-dimensional furnaces method
    煤的燃烧特性测定方法 一维炉法
    China National Standards
    dimensional

    English PDF
    GB/T 39744-2021 General requirements of mechanical product electronic manual based on three-dimensional model
    基于三维模型的机械产品电子手册编制通用要求
    China National Standards
    dimensional

    English PDF
    GB/T 30845.2-2021 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems)—Part 2: dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
    高压岸电连接系统(HVSC系统)用插头、插座和船用耦合器 第2部分:不同类型的船舶用附件的尺寸兼容性和互换性要求
    China National Standards
    dimensional

    English PDF
    GB/T 38762.3-2020 Geometrical product specifications (GPS)—dimensional tolerancing—Part 3: Angular sizes
    产品几何技术规范(GPS) 尺寸公差 第3部分:角度尺寸
    China National Standards
    dimensional

    English PDF
    GB/T 38762.1-2020 Geometrical product specifications (GPS)—dimensional tolerancing—Part 1: Linear sizes
    产品几何技术规范(GPS) 尺寸公差 第1部分:线性尺寸
    China National Standards
    dimensional

    English PDF
    GB/T 38762.2-2020 Geometrical product specifications (GPS)—dimensional tolerancing—Part 2: Dimensions other than linear or angular sizes
    产品几何技术规范(GPS) 尺寸公差 第2部分:除线性、角度尺寸外的尺寸
    China National Standards
    dimensional

    English PDF
    GB/T 34874.6-2020 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces
    产品几何技术规范(GPS) X射线三维尺寸测量机 第6部分:工件的检测方法
    China National Standards
    dimensional

    English PDF
    GB/T 38574-2020 General technical requirement for two-dimensional code of food traceability
    食品追溯二维码通用技术要求
    China National Standards
    dimensional

    English PDF
    GB/T 11918.5-2020 Plugs, socket-outlets and couplers for industrial purposes—Part 5: dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)
    工业用插头插座和耦合器 第5部分:低压岸电连接系统(LVSC系统)用插头、插座、船用连接器和船用输入插座的尺寸兼容性和互换性要求
    China National Standards
    dimensional

    English PDF
    GB/T 39375-2020 Leather—Physical and mechanical tests—Determination of dimensional change
    皮革 物理和机械试验 尺寸变化的测定
    China National Standards
    dimensional

    English PDF
    GB/T 38006-2019 Textiles—Method for determination of dimensional changes of fabrics by steam ironing
    纺织品 织物经蒸汽熨烫后尺寸变化试验方法
    China National Standards
    dimensional

    English PDF
    GB/T 37475-2019 dimensional series and operating equipments for inland waterway cleaning boat
    内河水面清扫船尺度系列和作业设备
    China National Standards
    dimensional

    English PDF
    GB/T 30544.13-2018 Nanotechnologies — Vocabulary — Part 13:Graphene and related two-dimensional (2D) materials
    纳米科技-术语-第13部分:石墨烯及相关二维材料
    China National Standards
    dimensional

    English PDF
    GB/T 12760-2018 Cylindrical worm and wormwheel information of the dimensional data to be givem on the drawing
    圆柱蜗杆、蜗轮图样上应注明的尺寸数据
    China National Standards
    dimensional

    English PDF
    GB/T 34874.3-2017 Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3:Acceptance and reverification tests
    产品几何技术规范(GPS) X射线三维尺寸测量机 第3部分:验收检测和复检检测
    China National Standards
    dimensional

    English PDF
    GB/T 34022-2017 Small-scale play facilities—Three-dimensional climbing net
    小型游乐设施 立体攀网
    China National Standards
    dimensional

    English PDF
    GB/T 33993-2017 Two dimensional code for commodity
    商品二维码
    China National Standards
    dimensional

    English PDF
    GB/T 33619-2017 Three-dimensional fabrics of aramid and its hybrid fibers
    芳纶及其混编纤维的三维织物
    China National Standards
    dimensional

    English PDF
    GB/T 23704-2017 Two-dimensional bar code symbol print quality test
    二维条码符号印制质量的检验
    China National Standards
    dimensional

    English PDF
    GB/T 35420-2017 Identification system for internet of things—Ecode encoding specifications for two-dimensional barcode
    物联网标识体系 Ecode在二维码中的存储
    China National Standards
    dimensional

    English PDF
    GB/T 35402-2017 Direct part mark (DPM) two dimensional bar code symbol quality test
    零部件直接标记二维条码符号的质量检验
    China National Standards
    dimensional

    English PDF
    GB/T 35627-2017 Indoor multi-dimensional location information GML
    室内多维位置信息标记语言
    China National Standards
    dimensional

    English PDF
    GB/T 6414-2017 Castings—dimensional tolerances and geometrical tolerances and machining allowances
    铸件 尺寸公差、几何公差与机械加工余量
    China National Standards
    dimensional

    English PDF
    GB/T 32825-2016 Specifications and technical requirements for three-phase dry-type tridimensional wound-core distribution transformers
    三相干式立体卷铁心配电变压器技术参数和要求
    China National Standards
    dimensional

    English PDF
    GB/T 5273-2016 dimensional standardisation of terminals for high-voltage apparatus
    高压电器端子尺寸标准化
    China National Standards
    dimensional

    English PDF
    GB/T 5159-2015 Metallic powders,excluding powders for hardmetals—Determination of dimensional changes associated with compacting and sintering
    金属粉末(不包括硬质合金用粉) 与成型和烧结有联系的尺寸变化的测定方法
    China National Standards
    dimensional

    English PDF
    GB/T 31053-2014 Technology requirements for three-dimensional modeling of reverse engineering for mechanical products
    机械产品逆向工程三维建模技术要求
    China National Standards
    dimensional

    English PDF
    GB/T 31295-2014 The core to wind turbine blade―Determination of dimensional stability at elevated temperatures with flexural load and with compressive load
    风电叶片用芯材 弯曲载荷和压缩载荷下高温尺寸稳定性的测定
    China National Standards
    dimensional

    English PDF
    GB/T 31022-2014 General technique specification for two-dimensional barcode business card
    名片二维码通用技术规范
    China National Standards
    dimensional

    English PDF
    GB/T 30845.2-2014 Plugs,socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems)—Part 2: dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
    高压岸电连接系统(HVSC系统)用插头、插座和船用耦合器 第2部分:不同类型的船舶用附件的尺寸兼容性和互换性要求
    China National Standards
    dimensional

    English PDF
    GB/T 30806-2014 Thermal insulating products for building applications—Determination of dimensional stability under specified temperature and humidity conditions
    建筑用绝热制品 在指定温度湿度条件下尺寸稳定性的测试方法
    China National Standards
    dimensional

    English PDF
    GB/T 11918.2-2014 Plugs,socket-outlets and couplers for industriial purposes―Part 2: dimensional compatiblity and interchangeability requirements for pin and contact-tube accessories
    工业用插头插座和耦合器 第2部分:带插销和插套的电器附件的尺寸兼容性和互换性要求
    China National Standards
    dimensional

    English PDF
    GB/T 30519-2014 Determination of hydrocarbon types and benzene in light petroleum distillates and products―Multidimensional gas chromatographic method
    轻质石油馏分和产品中烃族组成和苯的测定 多维气相色谱法
    China National Standards
    dimensional

    English PDF
    GB/T 30316-2013 Imaging materials―Film and paper―Determination of dimensional change
    影像材料 胶片和相纸 尺寸变化的测定
    China National Standards
    dimensional

    English PDF
    GB/T 8630-2013 Textiles―Determination of dimensional change in washing and drying
    纺织品 洗涤和干燥后尺寸变化的测定
    China National Standards
    dimensional

    English PDF
    GB/T 8628-2013 Textiles—Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
    纺织品 测定尺寸变化的试验中织物试样和服装的准备、标记及测量
    China National Standards
    dimensional

    English PDF
    GB/T 8545-2012 Die forgings of aluminium and aluminium alloy - dimensional tolerance and machining allowance
    铝及铝合金模锻件的尺寸偏差及加工余量
    China National Standards
    dimensional

    English PDF
    GB/T 28768-2012 Determination of hydrocarbon types and oxygenates in automotive-motor gasoline by multidimensional gas chromatography method
    车用汽油烃类组成和含氧化合物的测定 多维气相色谱法
    China National Standards
    dimensional

    English PDF
    GB/T 27767-2011 Two-dimensional barcode - Compact matrix code
    二维条码 紧密矩阵码
    China National Standards
    dimensional

    English PDF
    GB/T 27766-2011 Two-dimensional barcode - Grid matrix code
    二维条码 网格矩阵码
    China National Standards
    dimensional

    English PDF
    GB/T 27584-2011 Optical functional films - Polyethylene terephthalate(PET) film - Determination of dimensional change on heating
    光学功能薄膜 聚对苯二甲酸乙二醇酯(PET)薄膜 受热后尺寸变化测定方法
    China National Standards
    dimensional

    English PDF
    GB/T 26498-2011 Industrial automation systems and integration - Physical device control - dimensional Measuring Interface Standard (DMIS)
    工业自动化系统与集成 物理设备控制 尺寸测量接口标准(DMIS)
    China National Standards
    dimensional

    English PDF
    GB/T 26099.4-2010 General principles of three-dimensional modeling for mechanical products - Part 4:Model projection drawings
    机械产品三维建模通用规则 第4部分:模型投影工程图
    China National Standards
    dimensional

    English PDF
    GB/T 26099.3-2010 General principles of three-dimensional modeling for mechanical products - Part 3: Assembly modeling
    机械产品三维建模通用规则 第3部分:装配建模
    China National Standards
    dimensional

    English PDF
    GB/T 26099.2-2010 General principles of three-dimensional modeling for mechanical products - Part 2: Part modeling
    机械产品三维建模通用规则 第2部分:零件建模
    China National Standards
    dimensional

    English PDF
    GB/T 26099.1-2010 General principles of three-dimensional modeling for mechanical products - Part 1: General requirements
    机械产品三维建模通用规则 第1部分:通用要求
    China National Standards
    dimensional

    English PDF
    GB/T 25438-2010 Specification and technical requirements for three-phase oil-immersed tridimensional toroidal-core distribution transformers
    三相油浸式立体卷铁心配电变压器技术参数和要求
    China National Standards
    dimensional

    English PDF
    GB/T 25161.2-2010 Packaging sacks - dimensional tolerances - Part 2: Sacks made from thermoplastic flexible film
    包装袋 尺寸允许偏差 第2部分:热塑性软质薄膜袋
    China National Standards
    dimensional

    English PDF
    GB/T 25161.1-2010 Packaging sacks - dimensional tolerances - Part 1: Paper sacks
    包装袋 尺寸允许偏差 第1部分:纸袋
    China National Standards
    dimensional

    English PDF
    GB/T 25108-2010 Function Specification for three-dimensional CAD Software
    三维CAD软件功能规范
    China National Standards
    dimensional

    English PDF
    GB/T 23704-2009 Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two-dimensional symbols
    信息技术 自动识别与数据采集技术 二维条码符号印制质量的检验
    China National Standards
    dimensional

    English PDF
    GB/T 17164-2008 Glossary of terms used in dimensional measuring instruments - Product terms
    几何量测量器具术语 产品术语
    China National Standards
    dimensional

    English PDF
    GB/T 17163-2008 Glossary of terms used in dimensional measuring instruments - General terms
    几何量测量器具术语 基本术语
    China National Standards
    dimensional

    English PDF
    GB/T 22481-2008 Cereals, oilseeds and pulses - Measurement of unit pressure loss in one-dimensional air flow through bulk grain
    谷物、油料和豆类 单向气流穿过散粮的单位压力损失测定
    China National Standards
    dimensional

    English PDF
    GB/T 14486-2008 dimensional tolerances for moulded plastic parts
    塑料模塑件尺寸公差
    China National Standards
    dimensional

    English PDF
    GB/Z 21738-2008 Fundamental structures of one dimensional nanomaterials - High resolution electron microscopy characterization
    一维纳米材料的基本结构 高分辨透射电子显微镜检测方法
    China National Standards
    dimensional

    English PDF
    GB 15766.1-2008 Lamps for road vehicles - dimensional,electrical and luminous requirements
    道路机动车辆灯泡 尺寸、光电性能要求
    China National Standards
    dimensional

    English PDF
    GB/T 16471-2008 dimensional and weight constraints for transport package
    运输包装件尺寸与质量界限
    China National Standards
    dimensional

    English PDF
    GB/T 8811-2008 Test method for dimensional stability of rigid cellular plastics
    硬质泡沫塑料 尺寸稳定性试验方法
    China National Standards
    dimensional

    English PDF
    GB/T 328.13-2007 Test methods for building sheets for waterproofing - Part 13: Plastic and rubber sheets for waterproofing-dimensional stability
    建筑防水卷材试验方法 第13部分:高分子防水卷材 尺寸稳定性
    China National Standards
    dimensional

    English PDF
    GB/T 328.12-2007 Test methods for building sheets for waterproofing - Part 12: Bitumen sheets for waterproofing-dimensional stability
    建筑防水卷材试验方法 第12部分:沥青防水卷材 尺寸稳定性
    China National Standards
    dimensional

    English PDF
    GB/T 8095-2005 Equipment for harvesting-dimensional compatibility of forage harvesting machinery
    收获机械 饲料收获机 相关尺寸
    China National Standards
    dimensional

    English PDF
    GB/T 4095-2005 Disc wheels for Trucks dimensional character istics of attachment on hub
    商用汽车辐板式车轮在轮毂上的安装尺寸
    China National Standards
    dimensional

    English PDF
    GB/T 19946-2005 Packaging-Bar code and two-dimensional symbols for shipping,transport and receiving labels
    包装 用于发货、运输和收货标签的一维条码和二维条码
    China National Standards
    dimensional

    English PDF
    GB/T 3903.13-2005 Footwear-Test methods for outsoles-dimensional stability
    鞋类-外底试验方法-尺寸稳定性
    China National Standards
    dimensional

    English PDF
    GB/T 3903.10-2005 Footwear-Test methods for insoles-dimensional stability
    鞋类-内底试验方法-尺寸稳定性
    China National Standards
    dimensional

    English PDF
    GB/T 5847-2004 dimensional chain--Methods of calculation
    尺寸链 计算方法
    China National Standards
    dimensional

    English PDF
    GB/T 12027-2004 Plastics--Film and sheeting--Determination of dimensional change on heating
    塑料 薄膜和薄片 加热尺寸变化率试验方法
    China National Standards
    dimensional

    English PDF
    GB/T 19234-2003 dimensional codes for passenger cars
    乘用车尺寸代码
    China National Standards
    dimensional

    English PDF
    GB/T 18744-2002 Geosynthetics--Plastic three dimensional erosion control mat
    土工合成材料 塑料三维土工网垫
    China National Standards
    dimensional

    English PDF
    GB/T 3672.1-2002 Rubber--Tolerances of products--Part 1:dimensional tolerances
    橡胶制品的公差 第1部分:尺寸公差
    China National Standards
    dimensional

    English PDF
    GB/T 8632-2001 Textiles--Woven fabrics--Determination of dimensional change on commercial laundering near the boiling point
    纺织品 机织物 近沸点 商业洗烫后尺寸变化的测定
    China National Standards
    dimensional

    English PDF
    GB/T 8631-2001 Textiles--Determination of dimensional changes of fabrics induced by cold-water immersion
    纺织品 织物因冷水浸渍而引起的尺寸变化的测定
    China National Standards
    dimensional

    English PDF
    GB/T 6414-1999 Castings--System of dimensional tolerances and machining allowances
    铸件 尺寸公差与机械加工余量
    China National Standards
    dimensional

    English PDF
    GB/T 17347-1998 Commercial road vehicles--dimensional codes
    商用道路车辆 尺寸代码
    China National Standards
    dimensional

    English PDF
    GB/T 17031.2-1997 Textiles--Effect of dry heat on fabrics under low pressure--Part 2:Determination ofdimensional change in fabrics exposed to dry heat
    纺织品 织物在低压下的干热效应 第2部分:受干热的织物尺寸变化的测定
    China National Standards
    dimensional

    English PDF
    GB/T 16861-1997 Sensory analysis--Identification and selection of descriptors for establishing a sensory profile by a multidimensional approach
    感官分析 通过多元分析方法鉴定和选择用于建立感官剖面的描述词
    China National Standards
    dimensional

    English PDF
    GB/T 15131.1-1994 Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad,on 80 tracks on each side--Part 1:dimensional, physical and magnetic characteristics
    信息处理 数据交换用130 mm改进调频制记录的位密度为13262 磁通翻转/弧度、每面80条磁道的软磁盘 第一部分:尺寸、物理性能和磁性能
    China National Standards
    dimensional

    English PDF
    GB/T 15130.1-1994 Information processing--Data interchange on 90mm (35in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side--Part1:dimensional, physical and magnetic characteristics
    信息处理 数据交换用90 mm改进调频制记录的位密度为15916 磁通翻转/弧度、每面80条磁道的软磁盘 第一部分:尺寸、物理性能和磁性能
    China National Standards
    dimensional

    English PDF
    GB/T 12760-1991 Cylindrical worm and wormwheel information of the dimensional data to be given on the drawing
    圆柱蜗杆、蜗轮图样上应注明的尺寸数据
    China National Standards
    dimensional

    English PDF
    GB/T 12371-1990 Bevel gears--Information of the dimensional data to be given on the drawing
    锥齿轮 图样上应注明的尺寸数据
    China National Standards
    dimensional

    English PDF
    GB/T 9717-1988 Information processing--Unrecorded magnetic tapes for interchange instrumentation applications -- Generaldimensional requirements
    信息处理 互换用未记录计测磁带的一般尺寸要求
    China National Standards
    dimensional

    English PDF
    GB/T 6443-1986 Involute cylindrical gears--Information of the dimensional data to be given on the drawing
    渐开线圆柱齿轮图样上应注明的尺寸数据
    China National Standards
    dimensional

    English PDF

    Find out:112Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        [email protected] 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards