China National Standards

China engines GB Standards List


  •  China "engines" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 20064.1-2023 Reciprocating internal combustion engines - Handle starters - Part 1: Safety requirements and tests {译}
    往复式内燃机 手柄起动装置 第1部分:安全要求和试验
    China National Standards
    engines

    English PDF
    GB/T 1149.17-2023 Internal combustion engines - Piston rings - Part 17: Steel spiral spring oil rings {译}
    内燃机 活塞环 第17部分:钢质螺旋撑簧油环
    China National Standards
    engines

    English PDF
    GB/T 1149.12-2023 Internal combustion engines - Piston rings - Part 12: Wedge steel rings {译}
    内燃机 活塞环 第12部分:楔形钢环
    China National Standards
    engines

    English PDF
    GB/T 1149.11-2023 Internal combustion engines - Piston rings - Part 11: Wedge cast iron rings {译}
    内燃机 活塞环 第11部分:楔形铸铁环
    China National Standards
    engines

    English PDF
    GB/T 15548-2023 General technical conditions for three-phase synchronous generators driven by reciprocating internal combustion engines {译}
    往复式内燃机驱动的三相同步发电机通用技术条件
    China National Standards
    engines

    English PDF
    GB/T 20787-2023 Reciprocating internal combustion engines—Measurement methods for structure-borne noise {译}
    往复式内燃机 结构噪声测量方法
    China National Standards
    engines

    English PDF
    GB/T 14097-2023 Reciprocating internal combustion engines Noise limits {译}
    往复式内燃机 噪声限值
    China National Standards
    engines

    English PDF
    GB/T 8190.4-2023 Reciprocating internal combustion engines - Emissions measurement - Part 4: Steady-state and transient test cycles for engines of different uses {译}
    往复式内燃机 排放测量 第4部分:不同用途发动机的稳态和瞬态试验循环
    China National Standards
    engines

    English PDF
    GB/T 8190.1-2023 Reciprocating internal combustion engines - Emission measurements - Part 1: Test bench measurement systems for gaseous and particulate emissions {译}
    往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量系统
    China National Standards
    engines

    English PDF
    GB/T 41517-2022 Ships and offshore technology - Ventilation of cargo spaces of vehicles capable of traveling with internal combustion engines - Theoretical calculation of the total airflow demand {译}
    船舶和海上技术 可行驶内燃机车辆的货舱的通风 气流总需量的理论计算
    China National Standards
    engines

    English PDF
    GB/T 24141.2-2022 Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels
    内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分:汽油燃料
    China National Standards
    engines

    English PDF
    GB/T 41161-2022 Reciprocating internal combustion engines—Measurement method for combustion noise
    往复式内燃机 燃烧噪声测量方法
    China National Standards
    engines

    English PDF
    GB/T 2820.8-2022 Alternating generator sets driven by reciprocating internal combustion engines - Part 8: Requirements and tests for low power generator sets {译}
    往复式内燃机驱动的交流发电机组 第8部分:对小功率发电机组的要求和试验
    China National Standards
    engines

    English PDF
    GB/T 2820.1-2022 Alternating generator sets driven by reciprocating internal combustion engines - Part 1: Purpose, rating and performance {译}
    往复式内燃机驱动的交流发电机组 第1部分:用途、定额和性能
    China National Standards
    engines

    English PDF
    GB/T 1149.8-2022 Internal combustion engines - Piston rings - Part 8: Rectangular steel rings {译}
    内燃机 活塞环 第8部分:矩形钢环
    China National Standards
    engines

    English PDF
    GB/T 25361.1-2022 Internal combustion engines - Piston pins - Part 1: Technical requirements {译}
    内燃机 活塞销 第1部分:技术要求
    China National Standards
    engines

    English PDF
    GB/T 21404-2022 Internal combustion engines - Methods of determining and measuring engine power - General requirements {译}
    内燃机 发动机功率的确定和测量方法 一般要求
    China National Standards
    engines

    English PDF
    GB/T 8190.6-2022 Reciprocating internal combustion engines - Emission measurements - Part 6: Measurement results and test reports {译}
    往复式内燃机 排放测量 第6部分:测量结果和试验报告
    China National Standards
    engines

    English PDF
    GB 14023-2022 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for protection of off-vehicle receivers {译}
    车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法
    China National Standards
    engines

    English PDF
    GB/T 26089-2021 Guidelines for instruction of marine diesel engines
    船用柴油发动机手册编写要求
    China National Standards
    engines

    English PDF
    GB/T 12773-2021 Valve steel and superalloy bars for internal combustion engines
    内燃机气阀用钢及合金棒材
    China National Standards
    engines

    English PDF
    GB/T 8243.12-2021 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity
    内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量
    China National Standards
    engines

    English PDF
    GB/T 6809.12-2021 Reciprocating internal combustion engines—Vocabulary of components and systems—Part 12:Exhaust emission control systems
    往复式内燃机 零部件和系统术语 第12部分:排放控制系统
    China National Standards
    engines

    English PDF
    GB/T 1149.6-2021 Internal combustion engines—Piston rings—Part 6: Scraper rings made of cast iron
    内燃机 活塞环 第6部分:铸铁刮环
    China National Standards
    engines

    English PDF
    GB/T 1149.4-2021 Internal combustion engines—Piston rings—Part 4:Quality requirements
    内燃机 活塞环 第4部分:质量要求
    China National Standards
    engines

    English PDF
    GB/T 3799-2021 Technical requirements for completion and acceptance of vehicle engines overhaul
    汽车发动机大修竣工出厂技术条件
    China National Standards
    engines

    English PDF
    GB/T 20076-2021 Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds
    摩托车和轻便摩托车发动机最大扭矩和最大净功率测量方法
    China National Standards
    engines

    English PDF
    GB/T 20969.4-2021 Special environmental condition—Machinery for plateau—Part 4:Guide rule of test for plateau natural environment—Internal combustion engines
    特殊环境条件 高原机械 第4部分:高原自然环境试验导则 内燃动力机械
    China National Standards
    engines

    English PDF
    GB/T 20969.1-2021 Special environmental condition—Machinery for plateau—Part 1: Requirements for internal combustion engines on plateau
    特殊环境条件 高原机械 第1部分:高原对内燃动力机械的要求
    China National Standards
    engines

    English PDF
    GB/T 38750.2-2020 Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 2:Gasoline engines
    往复式内燃机能效评定规范 第2部分:汽油机
    China National Standards
    engines

    English PDF
    GB/T 38750.1-2020 Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 1:Diesel engines
    往复式内燃机能效评定规范 第1部分:柴油机
    China National Standards
    engines

    English PDF
    GB/T 8243.14-2020 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings
    内燃机全流式机油滤清器试验方法 第14部分:复合材料滤清器的冷起动模拟和液压脉冲耐久试验
    China National Standards
    engines

    English PDF
    GB/T 38340-2019 Small craft—Reciprocating internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions
    小艇 往复式内燃机排放测量 气体和颗粒排放物的试验台测量
    China National Standards
    engines

    English PDF
    GB/T 37692-2019 Running mode specific fuel consumption limits and measurement methods for small spark ignition engines of non-road mobile machinery
    非道路移动机械用小型点燃式发动机工况法燃料消耗率限值与测量方法
    China National Standards
    engines

    English PDF
    GB/T 6809.11-2018 Reciprocating internal combustion engines—Vocabulary of components and systems—Part 11: Fuel systems
    往复式内燃机-零部件和系统术语-第11部分:燃油系统
    China National Standards
    engines

    English PDF
    GB/T 20651.1-2018 Reciprocating internal combustion engines—Safety—Part 1: Compression ignition engines
    往复式内燃机-安全-第1部分:压燃式发动机
    China National Standards
    engines

    English PDF
    GB/T 6809.10-2018 Reciprocating internal combustion engines—Vocabulary of components and systems—Part 10: Ignition systems
    往复式内燃机-零部件和系统术语-第10部分:点火系统
    China National Standards
    engines

    English PDF
    GB/T 8190.8-2018 Reciprocating internal combustion engines—Exhaust emission measurement—Part 8:Engine group determination
    往复式内燃机-排放测量-第8部分:发动机系组的确定
    China National Standards
    engines

    English PDF
    GB/T 1147.1-2017/XG1-2018 Small and medium power internal combustion engines - Part 1:General requirements
    《中小功率内燃机-第1部分:通用技术条件》国家标准第1号修改单
    China National Standards
    engines

    English PDF
    GB/T 18655-2018 Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers
    车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法
    China National Standards
    engines

    English PDF
    GB/T 14097-2018 Reciprocating internal combustion engines—Limit values of emitted noise
    往复式内燃机 噪声限值
    China National Standards
    engines

    English PDF
    GB/T 23340-2018 Internal combustion engines—Connecting-rods—Specification
    内燃机 连杆 技术条件
    China National Standards
    engines

    English PDF
    GB/T 8243.5-2018 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability
    内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验
    China National Standards
    engines

    English PDF
    GB/T 23338-2018 Internal combustion engines—Charge air coolers—Specification
    内燃机 增压空气冷却器 技术条件
    China National Standards
    engines

    English PDF
    GB/T 23339-2018 Internal combustion engines—Crankshafts—Specification
    内燃机 曲轴 技术条件
    China National Standards
    engines

    English PDF
    GB/T 8243.15-2018 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings
    内燃机全流式机油滤清器试验方法 第15部分:复合材料滤清器的振动疲劳试验
    China National Standards
    engines

    English PDF
    GB/T 8190.7-2018 Reciprocating internal combustion engines—Exhaust emission measurement—Part 7:Engine family determination
    往复式内燃机 排放测量 第7部分:发动机系族的确定
    China National Standards
    engines

    English PDF
    GB/T 34586-2017 Road vehicles—Spark-plugs for gas engines—Test methods and requirements
    道路车辆 燃气火花塞 试验方法和要求
    China National Standards
    engines

    English PDF
    GB/T 34600-2017 The technical specification for remanufacturing of automotive components—Spark and compression ignition engines
    汽车零部件再制造产品技术规范 点燃式、压燃式发动机
    China National Standards
    engines

    English PDF
    GB/T 18948-2017 Rubber hoses and tubing for cooling systems for internal-combustion engines—Specification
    内燃机冷却系统用橡胶软管和纯胶管 规范
    China National Standards
    engines

    English PDF
    GB/T 33928-2017 Reciprocating internal combustion engines—Measurement method for exhaust silencers—Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
    往复式内燃机 排气消声器测量方法 声压法排气噪声声功率级和插入损失及功率损失比
    China National Standards
    engines

    English PDF
    GB/T 1149.15-2017 Internal combustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron
    内燃机 活塞环 第15部分:薄型铸铁螺旋撑簧油环
    China National Standards
    engines

    English PDF
    GB/T 8190.9-2017 Reciprocating internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程
    China National Standards
    engines

    English PDF
    GB/T 8188-2017 Reciprocating internal combustion engines—Emissions terminology and nomenclature
    往复式内燃机 排放术语和定义
    China National Standards
    engines

    English PDF
    GB/T 8243.7-2017 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 7:Vibration fatigue test
    内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验
    China National Standards
    engines

    English PDF
    GB/T 8243.6-2017 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test
    内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验
    China National Standards
    engines

    English PDF
    GB/T 1859.4-2017 Reciprocating internal combustion engines—Measurement of sound power levels using sound pressure—Part 4:Survey method using a reference sound source
    往复式内燃机 声压法声功率级的测定 第4部分:使用标准声源简易法
    China National Standards
    engines

    English PDF
    GB/T 33485-2017 Large yachts—Diesel engines for main propulsion and essential auxiliaries—Safety requirements
    大型游艇 主辅柴油机 安全要求
    China National Standards
    engines

    English PDF
    GB/T 1147.1-2017 Small and medium power internal combustion engines—Part 1: General requirements
    中小功率内燃机 第1部分:通用技术条件
    China National Standards
    engines

    English PDF
    GB/T 1147.2-2017 Small and medium power internal combustion engines—Part 2: Test methods
    中小功率内燃机 第2部分:试验方法
    China National Standards
    engines

    English PDF
    GB/T 35348-2017 Diesel engines—Fuel filters—Method for evaluating fuel/water separation efficiency
    柴油机 燃油滤清器 油/水分离效率的评定方法
    China National Standards
    engines

    English PDF
    GB/T 35358.1-2017 Inlet air cleaning equipment for vehicle engines and compressors—Part 1: Fractional efficiency testing with fine particles(0.3 μm to 5 μm optical diameter)
    汽车发动机和压缩机进气空气滤清装置 第1部分:细颗粒分级效率测试(0.3μm到5μm)
    China National Standards
    engines

    English PDF
    GB/T 35363-2017 Diesel fuel and petrol filters for vehicle engines—The test method for filtration efficiency and contaminant retention capacity—Method of particle counting
    汽车发动机柴油滤清器和汽油滤清器 滤清效率和纳污容量的测定方法 颗粒计数法
    China National Standards
    engines

    English PDF
    GB/T 35358.2-2017 Inlet air cleaning equipment for vehicle engines and compressors—Part 2: Fractional efficiency testing with coarse particles(5 μm to 40 μm optical diameter)
    汽车发动机和压缩机进气空气滤清装置 第2部分:粗颗粒分级效率测试(5μm到40μm)
    China National Standards
    engines

    English PDF
    GB/T 33349-2016 General specification for gas electric power plant system with reciprocating internal combustion engines
    往复式内燃燃气电站系统通用技术条件
    China National Standards
    engines

    English PDF
    GB 15097-2016 Limits and measurement methods for exhaust pollutants from marine engines (CHINAⅠ、Ⅱ)
    船舶发动机排气污染物排放限值及测量方法(中国第一、二阶段)
    China National Standards
    engines

    English PDF
    GB/T 6809.5-2016 Reciprocating internal combustion engines—Vocabulary of components and systems—Part 5: Cooling systems
    往复式内燃机 零部件和系统术语 第5部分:冷却系统
    China National Standards
    engines

    English PDF
    GB/T 8243.13-2015 Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings
    内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验
    China National Standards
    engines

    English PDF
    GB/T 3821-2015 Small and medium power internal combustion engines—Cleanliness limits and measurements
    中小功率内燃机 清洁度限值和测定方法
    China National Standards
    engines

    English PDF
    GB/T 20064.1-2015 Reciprocating internal combustion engines—Handle starting equipment—Part 1: Safety requirements and tests
    往复式内燃机 手柄起动装置 第1部分:安全要求和试验
    China National Standards
    engines

    English PDF
    GB/T 1859.3-2015 Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 3: Precision methods for hemi-anechoic rooms
    往复式内燃机 声压法声功率级的测定 第3部分:半消声室精密法
    China National Standards
    engines

    English PDF
    GB/T 1859.2-2015 Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 2: Survey method
    往复式内燃机 声压法声功率级的测定 第2部分:简易法
    China National Standards
    engines

    English PDF
    GB/T 1859.1-2015 Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 1: Engineering method
    往复式内燃机 声压法声功率级的测定 第1部分:工程法
    China National Standards
    engines

    English PDF
    GB/T 1149.16-2015 Internal combustion engines—Piston rings—Part 16: Expander/segment oil-control rings
    内燃机 活塞环 第16部分:钢带组合油环
    China National Standards
    engines

    English PDF
    GB 20651.2-2014 Reciprocating internal combustion engines―safety―Part 2: Spark ignition engines
    往复式内燃机 安全 第2部分:点燃式发动机
    China National Standards
    engines

    English PDF
    GB 20891-2014 Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery(CHINA Ⅲ、Ⅳ)
    非道路移动机械用柴油机排气污染物排放限值及测量方法(中国第三、四阶段)
    China National Standards
    engines

    English PDF
    GB/T 6809.9-2013 Reciprocating internal combustion engines―Vocabulary of components and systems―Part 9: Control and monitoring systems
    往复式内燃机 零部件和系统术语 第9部分:监控系统
    China National Standards
    engines

    English PDF
    GB/T 6809.3-2013 Reciprocating internal combustion engines―Vocabulary of components and systems―Part 3: Main running gear
    往复式内燃机 零部件和系统术语 第3部分:主要运动件
    China National Standards
    engines

    English PDF
    GB/T 6809.2-2013 Reciprocating internal combustion engines—Vocabulary of components and systems—Part 2: Valves,camshaft drives and actuating mechanisms
    往复式内燃机 零部件和系统术语 第2部分:气门、凸轮轴传动和驱动机构
    China National Standards
    engines

    English PDF
    GB/T 30462-2013 Remanufactured non-road internal combustion engines―General specifications
    再制造非道路用内燃机 通用技术条件
    China National Standards
    engines

    English PDF
    GB/T 1149.12-2013 Internal combustion engines―Piston rings―Part 12: Half keystone rings made of steel
    内燃机 活塞环 第12部分:楔形钢环
    China National Standards
    engines

    English PDF
    GB/T 1149.10-2013 Internal combustion engines-Piston rings―Part 10: Keystone rings made of steel
    内燃机 活塞环 第10部分:梯形钢环
    China National Standards
    engines

    English PDF
    GB/T 30138-2013 Design code for exhaust and cooling water heat recovery system of gas electric power plant with reciprocating internal combustion engines
    往复式内燃燃气电站余热利用系统设计规范
    China National Standards
    engines

    English PDF
    GB 29518-2013 Diesel engines NOx reduction agent - Aqueous urea solution (AUS 32)
    柴油发动机氮氧化物还原剂 尿素水溶液(AUS 32)
    China National Standards
    engines

    English PDF
    GB/T 29130-2012 Ships-tachomaters for marine engines
    船用发动机转速表
    China National Standards
    engines

    English PDF
    GB/T 28961-2012 Automotive diesel - Two-stage fuel filters for Compression-ignition engines - Mounting and connecting dimensions
    汽车柴油机 双级燃油滤清器 安装和连接尺寸
    China National Standards
    engines

    English PDF
    GB/T 28954-2012 Automotive engines - Spin-on filters for lubricating oil - Connect dimensions
    汽车发动机 旋装式机油滤清器 连接尺寸
    China National Standards
    engines

    English PDF
    GB/T 28953-2012 Automotive diesel - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions
    汽车柴油机 旋装式燃油滤清器 安装和连接尺寸
    China National Standards
    engines

    English PDF
    GB/T 28950.2-2012 Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components
    道路车辆和内燃机 滤清器名词术语 第2部分:滤清器及其部件性能指标定义
    China National Standards
    engines

    English PDF
    GB/T 28950.1-2012 Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components
    道路车辆和内燃机 滤清器名词术语 第1部分:滤清器和滤清器部件定义
    China National Standards
    engines

    English PDF
    GB/T 28949-2012 Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing
    内燃机和空气压缩机用进气空气滤清器 性能试验
    China National Standards
    engines

    English PDF
    GB/T 1151-2012 Internal combustion engines - Main and connecting rod bearings - Specifications
    内燃机 主轴瓦及连杆轴瓦 技术条件
    China National Standards
    engines

    English PDF
    GB/T 28793-2012 Technical requirements of fuel saving for fishing vessel diesel engines
    渔业船舶柴油机节油技术要求
    China National Standards
    engines

    English PDF
    GB/T 28790-2012 Technical requirements and measuring methods of fuel saving devices for diesel engines of fishing vessel
    渔业船舶柴油机节油装置技术条件及检测方法
    China National Standards
    engines

    English PDF
    GB/T 6072.4-2012 Reciprocating internal combustion engines - Performance - Part 4: Speed governing
    往复式内燃机 性能 第4部分:调速
    China National Standards
    engines

    English PDF
    GB/T 8243.9-2012 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
    内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验
    China National Standards
    engines

    English PDF
    GB/T 8190.5-2011 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
    往复式内燃机 排放测量 第5部分:试验燃料
    China National Standards
    engines

    English PDF
    GB/T 26728-2011 Efficient single cylinder diesel engines - Requirements
    高效单缸柴油机 技术条件
    China National Standards
    engines

    English PDF
    GB/T 8190.2-2011 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
    往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量
    China National Standards
    engines

    English PDF
    GB/T 26089-2010 Guidelines for instruction of marine diesel engines
    船用柴油发动机使用手册编写要求
    China National Standards
    engines

    English PDF
    GB/T 26088-2010 Shipbuilding - Water-cooled four cycle diesel engines for propelling
    造船 推进用水冷四冲程柴油机
    China National Standards
    engines

    English PDF
    GB/T 5923-2010 Test methods of fuel filter for automotive compression ignition engines
    汽车柴油机燃油滤清器试验方法
    China National Standards
    engines

    English PDF
    GB 26133-2010 Limits and measurement methods for exhaust pollutants from small spark ignition engines of non-road mobile machinery
    非道路移动机械用小型点燃式发动机排气污染物排放限值与测量方法(中国第一、二阶段)
    China National Standards
    engines

    English PDF
    GB/T 18655-2010 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
    车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法
    China National Standards
    engines

    English PDF
    GB/T 8190.9-2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程
    China National Standards
    engines

    English PDF
    GB/T 8190.4-2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
    往复式内燃机 排放测量 第4部分:不同用途发动机的稳态试验循环
    China National Standards
    engines

    English PDF
    GB/T 8190.1-2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
    往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量
    China National Standards
    engines

    English PDF
    GB/T 8190.10-2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    往复式内燃机 排放测量 第10部分:压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程
    China National Standards
    engines

    English PDF
    GB/T 6809.8-2010 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems
    往复式内燃机 零部件和系统术语 第8部分:起动系统
    China National Standards
    engines

    English PDF
    GB/T 6809.5-2010 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems
    往复式内燃机 零部件和系统术语 第5部分:冷却系统
    China National Standards
    engines

    English PDF
    GB/T 25368-2010 Electronic control common rail fuel injection system for diesel engines - The high-pressure supply pump - Specifications
    柴油机电控共轨喷油系统高压供油泵总成 技术条件
    China National Standards
    engines

    English PDF
    GB/T 25367-2010 Electronic control common rail fuel injection system for diesel engines - The injector - Specifications
    柴油机电控共轨喷油系统喷油器总成 技术条件
    China National Standards
    engines

    English PDF
    GB/T 25366-2010 Electronic control common rail fuel injection system for diesel engines - The rail - Specifications
    柴油机电控共轨喷油系统共轨管总成 技术条件
    China National Standards
    engines

    English PDF
    GB/T 25365.1-2010 Electronic control common rail fuel injection system for diesel engines - Specifications - Part 1: Machinery
    柴油机电控共轨喷油系统总成 技术条件 第1部分:机械
    China National Standards
    engines

    English PDF
    GB/T 25363-2010 Electromechanical solenoid fuel injector assemblies of gasoline engines - Testing methods
    汽油机电磁阀式喷油器总成 试验方法
    China National Standards
    engines

    English PDF
    GB/T 25362-2010 Electromechanical solenoid fuel injector assemblies of gasoline engines - Technical requirements
    汽油机电磁阀式喷油器总成 技术条件
    China National Standards
    engines

    English PDF
    GB/T 25361.2-2010 Internal combustion engines - Piston pins - Part 2: Inspection measuring principles
    内燃机 活塞销 第2部分:检验规则
    China National Standards
    engines

    English PDF
    GB/T 25361.1-2010 Internal combustion engines - Piston pins - Part 1: General specifications
    内燃机 活塞销 第1部分:技术要求
    China National Standards
    engines

    English PDF
    GB/T 1150-2010 Internal combustion engines - Cast iron wet cylinder liners - Specifications
    内燃机 湿式铸铁气缸套 技术条件
    China National Standards
    engines

    English PDF
    GB/T 1149.7-2010 Internal combustion engines - Piston rings - Part 7: Rectangular rings made of cast iron
    内燃机 活塞环 第7部分:矩形铸铁环
    China National Standards
    engines

    English PDF
    GB/T 1149.3-2010 Internal combustion engines - Piston rings - Part 3: Material specifications
    内燃机 活塞环 第3部分:材料规范
    China National Standards
    engines

    English PDF
    GB/T 1149.2-2010 Internal combustion engines - Piston rings - Part 2: Vocabulary
    内燃机 活塞环 第2部分:术语
    China National Standards
    engines

    English PDF
    GB/T 1149.11-2010 Internal combustion engines - Piston rings - Part 11: Half keystone rings made of cast iron
    内燃机 活塞环 第11部分:楔形铸铁环
    China National Standards
    engines

    English PDF
    GB/T 1148-2010 Internal combustion engines - Aluminium pistons - Specifications
    内燃机 铝活塞 技术条件
    China National Standards
    engines

    English PDF
    GB/T 24748-2009 Reciprocating internal combustion engines - Flywheels - General specifications
    往复式内燃机 飞轮 技术条件
    China National Standards
    engines

    English PDF
    GB 13954-2009 Warning lamps for police cars,fire engines,ambulances and engineering rescue vehicles
    警车、消防车、救护车、工程救险车标志灯具
    China National Standards
    engines

    English PDF
    GB/T 24554-2009 Performance test methods for fuel cell engines
    燃料电池发动机性能试验方法
    China National Standards
    engines

    English PDF
    GB/T 24141.2-2009 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Diesel fuels
    内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分:汽油燃料
    China National Standards
    engines

    English PDF
    GB/T 24141.1-2009 Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels
    内燃机燃油管路用橡胶软管和纯胶管 规范 第1部分:柴油燃料
    China National Standards
    engines

    English PDF
    GB/T 24140-2009 Rubber hose and tubing for air and vacuum systems for internal-combustion engines - Specification
    内燃机空气和真空系统用橡胶软管和纯胶管 规范
    China National Standards
    engines

    English PDF
    GB/T 18948-2009 Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
    内燃机冷却系统用橡胶软管和纯胶管 规范
    China National Standards
    engines

    English PDF
    GB/T 2820.2-2009 Reciprocating internal combustion engine driven alternating current generating sets - Part 2: engines
    往复式内燃机驱动的交流发电机组 第2部分:发动机
    China National Standards
    engines

    English PDF
    GB/T 8190.11-2009 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
    往复式内燃机 排放测量 第11部分:非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量
    China National Standards
    engines

    English PDF
    GB/T 6809.7-2009 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems
    往复式内燃机 零部件和系统术语 第7部分:调节系统
    China National Standards
    engines

    English PDF
    GB/T 6809.6-2009 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems
    往复式内燃机 零部件和系统术语 第6部分:润滑系统
    China National Standards
    engines

    English PDF
    GB/T 6809.1-2009 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers
    往复式内燃机 零部件和系统术语 第1部分:固定件及外部罩盖
    China National Standards
    engines

    English PDF
    GB/T 4759-2009 Exhaust silencers for internal combustion engines - Measurement procedure
    内燃机排气消声器 测量方法
    China National Standards
    engines

    English PDF
    GB/T 23342-2009 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements
    往复式内燃机 回弹式绳索起动装置 基本安全要求
    China National Standards
    engines

    English PDF
    GB/T 23340-2009 Internal combustion engines - Connecting-rods - Specification
    内燃机 连杆 技术条件
    China National Standards
    engines

    English PDF
    GB/T 23339-2009 Internal combustion engines - Crankshafts - Specification
    内燃机 曲轴 技术条件
    China National Standards
    engines

    English PDF
    GB/T 23338-2009 Internal combustion engines - Charge air coolers - Specification
    内燃机 增压空气冷却器 技术条件
    China National Standards
    engines

    English PDF
    GB/T 23337-2009 Internal combustion engines - Intake and exhaust valves - Specification
    内燃机 进、排气门 技术条件
    China National Standards
    engines

    English PDF
    GB/T 17804-2009 Reciprocating internal combustion engines - Graphical symbols
    往复式内燃机 图形符号
    China National Standards
    engines

    English PDF
    GB/T 14363-2009 Measure method of lubricating oil consumption for diesel engines
    柴油机机油消耗测定方法
    China National Standards
    engines

    English PDF
    GB/T 11700-2009 Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations
    小艇 船用推进往复式内燃机 功率的测定和标定
    China National Standards
    engines

    English PDF
    GB 11871-2009 Limits of airborne noise emitted by marine diesel engines
    船用柴油机辐射的空气噪声限值
    China National Standards
    engines

    English PDF
    GB/T 6072.3-2008 Reciprocating internal combustion engines - Performance - Part 3: Test measurements
    往复式内燃机 性能 第3部分:试验测量
    China National Standards
    engines

    English PDF
    GB/T 7184-2008 Small and medium power diesel engines - Measurement and evaluation of vibration
    中小功率柴油机 振动测量及评级
    China National Standards
    engines

    English PDF
    GB/T 1149.9-2008 Internal combustion engines - Piston rings - Part 9: Keystone rings made of cast iron
    内燃机 活塞环 第9部分:梯形铸铁环
    China National Standards
    engines

    English PDF
    GB/T 1149.8-2008 Internal combustion engines - Piston rings - Part 8: Rectangular rings made of steel
    内燃机 活塞环 第8部分:矩形钢环
    China National Standards
    engines

    English PDF
    GB/T 1149.6-2008 Internal combustion engines - Piston rings - Part 6: Scraper rings made of cast iron
    内燃机 活塞环 第6部分:铸铁刮环
    China National Standards
    engines

    English PDF
    GB/T 1149.5-2008 Internal combustion engines - Piston rings - Part 5: Inspection measuring principles
    内燃机 活塞环 第5部分:检验方法
    China National Standards
    engines

    English PDF
    GB/T 1149.4-2008 Internal combustion engines - Piston rings - Part 4: Quality requirements
    内燃机 活塞环 第4部分:质量要求
    China National Standards
    engines

    English PDF
    GB/T 1149.14-2008 Internal combustion engines - Piston rings - Part 14: Coil-spring-loaded oil control rings
    内燃机 活塞环 第14部分:螺旋撑簧油环
    China National Standards
    engines

    English PDF
    GB/T 1149.13-2008 Internal combustion engines - Piston rings - Part 13: Oil control rings
    内燃机 活塞环 第13部分:油环
    China National Standards
    engines

    English PDF
    GB/T 1149.1-2008 Internal combustion engines - Piston rings - Part 1: General specifications
    内燃机 活塞环 第1部分:通用规则
    China National Standards
    engines

    English PDF
    GB/T 10398-2008 Small gasoline engines - Evaluation and measurement of vibration
    小型汽油机 振动评级和测试方法
    China National Standards
    engines

    English PDF
    GB/T 2497-2008 Charge air coolers for marine diesel engines
    船用柴油机增压空气冷却器
    China National Standards
    engines

    English PDF
    GB/T 9487-2008 Diesel engines - Exhaust gas measurement under free acceleration
    柴油机自由加速排气烟度的测量方法
    China National Standards
    engines

    English PDF
    GB/T 725-2008 Internal combustion engines - Nomenclature and code of designations
    内燃机产品名称和型号编制规则
    China National Standards
    engines

    English PDF
    GB/T 12773-2008 Valve steel and superalloy bars for internal combustion engines
    内燃机气阀用钢及合金棒材
    China National Standards
    engines

    English PDF
    GB 20800.3-2008 General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 3: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
    爆炸性环境用往复式内燃机防爆技术通则 第3部分:存在甲烷和(或)可燃性粉尘的地下矿区巷道用I类内燃机
    China National Standards
    engines

    English PDF
    GB 14762-2008 Limits and measurement methods for exhaust pollutants from gasoline engines of heavy-duty vehicles (III,IV)
    重型车用汽油发动机与汽车排气污染物排放限值及测量方法(中国III、IV阶段)
    China National Standards
    engines

    English PDF
    GB/T 6573-2008 Cooling water radiator for tractor diesel engines - Method of indentifcation symbols
    拖拉机柴油机散热器型号编制方法
    China National Standards
    engines

    English PDF
    GB/T 6072.1-2008 Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use
    往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求
    China National Standards
    engines

    English PDF
    GB/T 21406-2008 Internal combustion engines - Engine weight (mass) declaration
    内燃机 发动机的重量(质量)标定
    China National Standards
    engines

    English PDF
    GB/T 21405-2008 Reciprocating intenal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
    往复式内燃机 发动机功率的确定和测量方法 排气污染物排放试验的附加要求
    China National Standards
    engines

    English PDF
    GB/T 20969.4-2008 Special environmental condition - Machinery for plateau - Part 4: Guide rule of test for plateau natural environment - Internal combustion engines
    特殊环境条件 高原机械 第4部分:高原自然环境试验导则 内燃动力机械
    China National Standards
    engines

    English PDF
    GB/T 21427-2008 Special environmental condition - Requirements and test methods for electric powerplant with internal combustion engines in dry heat-desert
    特殊环境条件 干热沙漠对内燃机电站系统的技术要求及试验方法
    China National Standards
    engines

    English PDF
    GB/T 21426-2008 Special environmental condition - Requirements for electric power plant with internal combustion engines on plateau
    特殊环境条件 高原对内燃机电站的要求
    China National Standards
    engines

    English PDF
    GB/T 21156.1-2007 Special environmental condition - Machinery for desert - Part 1: Internal combustion engines on dry heat-desert condition
    特殊环境条件 沙漠机械 第1部分:干热沙漠内燃动力机械
    China National Standards
    engines

    English PDF
    GB/T 20969.1-2007 Special environmental condition - Machinery for plateau - Part 1: Requirements for internal combustion engines on plateau
    特殊环境条件 高原机械 第1部分:高原对内燃动力机械的要求
    China National Standards
    engines

    English PDF
    GB/T 8243.12-2007 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
    内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量
    China National Standards
    engines

    English PDF
    GB/T 8243.11-2007 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters
    内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器
    China National Standards
    engines

    English PDF
    GB/T 6809.4-2007 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems
    往复式内燃机 零部件和系统术语 第4部分:增压及进排气管系统
    China National Standards
    engines

    English PDF
    GB/T 1147.2-2007 Small and medium power internal combustion engines - Part 2: Test methods
    中小功率内燃机 第2部分:试验方法
    China National Standards
    engines

    English PDF
    GB/T 1147.1-2007 Small and medium power internal combustion engines - Part 1:General requirements
    中小功率内燃机 第1部分:通用技术条件
    China National Standards
    engines

    English PDF
    GB/T 20845-2007 Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components
    小艇 舷内柴油机 机装燃油和电气部件
    China National Standards
    engines

    English PDF
    GB/T 20844-2007 Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components
    小艇 舷内汽油机 机装燃油和电气部件
    China National Standards
    engines

    English PDF
    GB/T 8243.7-2006 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test
    内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验
    China National Standards
    engines

    English PDF
    GB/T 8190.6-2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
    往复式内燃机 排放测量 第6部分:测量结果和试验报告
    China National Standards
    engines

    English PDF
    GB/T 20787-2006 Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
    往复式内燃机 中、高速往复式内燃机底脚结构噪声测试规范
    China National Standards
    engines

    English PDF
    GB 20800.2-2006 General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 2: Group Ⅱengines for use in flammable dust atmospheres
    爆炸性环境用往复式内燃机防爆技术通则 第2部分:可燃性粉尘环境用Ⅱ类内燃机
    China National Standards
    engines

    English PDF
    GB 20800.1-2006 General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 1: Group Ⅱengines for use in flammable gas and vapor atmospheres
    爆炸性环境用往复式内燃机防爆技术通则 第1部分:可燃性气体和蒸汽环境用 Ⅱ类内燃机
    China National Standards
    engines

    English PDF
    GB 20651.1-2006 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
    往复式内燃机 安全 第1部分:压燃式发动机
    China National Standards
    engines

    English PDF
    GB/T 20136-2006 Electric power plant with inernal combustion engines, general method of test for
    内燃机电站通用试验方法
    China National Standards
    engines

    English PDF
    GB/T 12786-2006 Automatic electric power plant with internal combustion engines for general specification
    自动化内燃机电站通用技术条件
    China National Standards
    engines

    English PDF
    GB/T 8243.6-2006 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
    内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验
    China National Standards
    engines

    English PDF
    GB/T 8243.5-2006 Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test
    内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验
    China National Standards
    engines

    English PDF
    GB/T 20064.2-2006 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement
    往复式内燃机 手柄起动装置 第2部分:脱开角试验方法
    China National Standards
    engines

    English PDF
    GB/T 20064.1-2006 Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests
    往复式内燃机 手柄起动装置 第1部分:安全要求和试验
    China National Standards
    engines

    English PDF
    GB/T 20063.11-2006 Graphical symbols for diagrams -Part 11: Devices for heat transfer and heat engines
    简图用图形符号 第11部分:热交换器和热发动机器件
    China National Standards
    engines

    English PDF
    GB/T 20076-2006 Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds
    摩托车和轻便摩托车发动机 最大扭矩和最大净功率测量方法
    China National Standards
    engines

    English PDF
    GB/T 1883.2-2005 Reciprocating internal combustion engines-Vocabulary-Part 2:Terms for engine maintenance
    往复式内燃机 词汇 第2部分:发动机维修术语
    China National Standards
    engines

    English PDF
    GB/T 1883.1-2005 Reciprocating internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation
    往复式内燃机 词汇 第1部分:发动机设计和运行术语
    China National Standards
    engines

    English PDF
    GB/T 20024-2005 Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability
    内燃机用橡胶和塑料燃油软管 可燃性试验方法
    China National Standards
    engines

    English PDF
    GB/T 3821-2005 Small and medium power internal combustion engines-Cleanliness measurement
    中小功率内燃机清洁度测定方法
    China National Standards
    engines

    English PDF
    GB/T 2940-2005 Technical specifications of springs for fuel pump,governor and injecter of diesel engines
    柴油机用喷油泵、调速器、喷油器弹簧技术条件
    China National Standards
    engines

    English PDF
    GB 17691-2005 Limits and measurement methods for exhaust pollutants from compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V)
    车用压燃式、气体燃料点燃式发动机与汽车排气污染物排放限值及测量方法(中国III、IV、V阶段)
    China National Standards
    engines

    English PDF
    GB 19756-2005 Limits and measurement methods for exhaust pollutants from diesel engines of tr-wheel low-speed goods vehicles
    三轮汽车和低速货车用柴油机排气污染物排放限值及测量方法(中国I、II阶段)
    China National Standards
    engines

    English PDF

    Find out:226Items   |  To Page of: First -Previous-Next -Last  | 1 2

     

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards