Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 27636-2023 |
Technical Specification for Processing of Frozen Tilapia fillets {译} 冻罗非鱼片加工技术规范 |
China National Standards fill |
 English PDF |
| GB/T 43399-2023 |
Road Vehicles Liquefied Natural Gas (LNG) filling Connector 3.1MPa Connector {译} 道路车辆 液化天然气（LNG）加注连接器 3.1MPa连接器 |
China National Standards fill |
English PDF |
| GB/T 25774.3-2023 |
Inspection of welding materials Part 3: Preparation and inspection of T-joint fillet weld specimens {译} 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验 |
China National Standards fill |
English PDF |
| GB/T 43070-2023 |
General technical specifications for carton (box) forming, filling, inserting and sealing packaging machines {译} 纸箱（盒）成型充填插合封口包装机通用技术规范 |
China National Standards fill |
English PDF |
| GB/T 25922-2023 |
Measurement of fluid flow in closed pipes Flow measurement using a vortex flowmeter installed in a circular cross-section pipe filled with fluid {译} 封闭管道中流体流量的测量 用安装在充满流体的圆形截面管道中的涡街流量计测量流量 |
China National Standards fill |
English PDF |
| GB/T 41631-2022 |
Unused mineral insulating oil for oil-filled cables {译} 充油电缆用未使用过的矿物绝缘油 |
China National Standards fill |
English PDF |
| GB/T 1844.2-2022 |
Plastics - Symbols and abbreviations - Part 2: fillers and reinforcing materials {译} 塑料 符号和缩略语 第2部分：填料和增强材料 |
China National Standards fill |
English PDF |
| GB/T 41733-2022 |
Determination of carbon residue in organic heat carrier Nitrogen filling method {译} 有机热载体残炭测定法 充氮法 |
China National Standards fill |
English PDF |
| GB/T 40540-2021 |
Specification for silicone grease thermal filler of spacecraft 航天器用导热硅脂规范 |
China National Standards fill |
English PDF |
| GB/T 40361-2021 |
Beer, carbonated beverage cans filling production line—General technical specifications 啤酒、碳酸饮料易拉罐灌装生产线 通用技术规范 |
China National Standards fill |
English PDF |
| GB/T 40360-2021 |
Still beverage metal cans filling and sealing machine—General technical specifications 不含气饮料金属罐灌装封罐机 通用技术条件 |
China National Standards fill |
English PDF |
| GB/T 39997-2021 |
Thermoplastic pipework for underground installation at petrol filling stations 加油站埋地用热塑性塑料复合管道系统 |
China National Standards fill |
English PDF |
| GB/T 39834-2021 |
Technical requirement of fully mechanized bag filling mining with paste 综合机械化膏体袋式充填采煤技术要求 |
China National Standards fill |
English PDF |
| GB/T 41124-2021 |
General technical requirements for aseptic blowing-filling-capping bloc 无菌吹灌旋一体机通用技术要求 |
China National Standards fill |
English PDF |
| GB/T 25684.11-2021 |
Earth-moving machinery—Safety—Part 11: Requirements for landfill compactors 土方机械 安全 第11部分：回填压实机的要求 |
China National Standards fill |
English PDF |
| GB 18599-2020 |
Standard for pollution control on the non-hazardous industrial solid waste storage and landfill 一般工业固体废物贮存和填埋污染控制标准 |
China National Standards fill |
English PDF |
| GB/T 51446-2021 |
Technical standard for concrete-filled steel tubular hybrid structures 钢管混凝土混合结构技术标准 |
China National Standards fill |
English PDF |
| GB/T 51403-2021 |
Technical standard for liner system of municipal solid waste sanitary landfill 生活垃圾卫生填埋场防渗系统工程技术标准 |
China National Standards fill |
English PDF |
| GB 50156-2021 |
Code for design and construction of filling station 汽车加油加气加氢站技术标准 |
China National Standards fill |
English PDF |
| GB/T 1094.15-2020 |
Power transformers—Part 15：Gas-filled power transformers 电力变压器 第15部分：充气式电力变压器 |
China National Standards fill |
English PDF |
| GB/T 38463-2020 |
General specification for ultra-clean plastic bottle filling machine 超洁净塑料瓶灌装设备通用技术要求 |
China JB-Machinery Industry Standards fill |
English PDF |
| GB/T 38458-2020 |
Automatic rinsing-filling-capping monobloc for packaged (barreled) drinking water—General technical specification 包装饮用水（桶装）全自动冲洗灌装封盖机 通用技术规范 |
China JB-Machinery Industry Standards fill |
English PDF |
| GB/T 38404-2020 |
Hot filling-capping machine for fruit and vegetable juice (with pulps)—General technical specification 果蔬汁(含颗粒)饮料热灌装封盖机 通用技术规范 |
China JB-Machinery Industry Standards fill |
English PDF |
| GB/T 17268-2020 |
Non-refillable steel welded cylinders for industrial use 工业用非重复充装焊接钢瓶 |
China National Standards fill |
English PDF |
| GB/T 39338-2020 |
Technical requirements of solid-filling in fully-mechanized coal mining 综合机械化固体充填采煤技术要求 |
China National Standards fill |
English PDF |
| GB/T 39337-2020 |
Technical requirement of fully mechanized bag filling mining with superhigh-water material 综合机械化超高水材料袋式充填采煤技术要求 |
China National Standards fill |
English PDF |
| GB/T 39336-2020 |
Technical requirement of roadside bag filling for gob-side entry retaining with high-water material 沿空留巷高水材料巷旁袋式充填技术要求 |
China National Standards fill |
English PDF |
| GB/T 39489-2020 |
Technical specification for the total tailings paste backfill 全尾砂膏体充填技术规范 |
China National Standards fill |
English PDF |
| GB/T 22380.3-2019 |
Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards fill |
English PDF |
| GB/T 22380.2-2019 |
Explosion protected safety technique of the petrol filling station—Part 2：Safety requirements for construction and performance of safe breaks for use on dispensers 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求 |
China National Standards fill |
English PDF |
| GB/T 38429.2-2019 |
Explosion protected safety technique of automotive LPG filling stations—Part 2: Explosion protected components related to LPG dispensers and installation requirements 燃气加气站防爆安全技术 第2部分：与液化石油气(LPG)有关的防爆部件和安装要求 |
China National Standards fill |
English PDF |
| GB/T 38429.1-2019 |
Explosion protected safety technique of automotive LPG filling stations—Part 1: Explosion protected safety technique requirements for LPG dispensers 燃气加气站防爆安全技术 第1部分：液化石油气(LPG)加气机防爆要求 |
China National Standards fill |
English PDF |
| GB/T 38365-2019 |
Technical procedure on smokeless production of copper phosphorus brazing filler metals 铜磷钎料无烟尘生产技术规范 |
China National Standards fill |
English PDF |
| GB/T 22380.3-2019 |
Explosion protected safety technique of the petrol filling station—Part 3：Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards fill |
English PDF |
| GB/T 22380.2-2019 |
Explosion protected safety technique of the petrol filling station—Part 2：Safety requirements for construction and performance of safe breaks for use on dispensers 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求 |
China National Standards fill |
English PDF |
| GB/T 51344-2019 |
Technical standard for anti-leakage retrofits of in-service fuel storage tanks in filling stations 加油站在役油罐防渗漏改造工程技术标准 |
China National Standards fill |
English PDF |
| GB/T 37853-2019 |
Gel ink ball pens and refills 中性墨水圆珠笔和笔芯 |
China National Standards fill |
English PDF |
| GB/T 26714-2019 |
Ball point pens and refills 油墨圆珠笔和笔芯 |
China National Standards fill |
English PDF |
| GB/T 32017-2019 |
Roller ball pens and refills 水性墨水圆珠笔和笔芯 |
China National Standards fill |
English PDF |
| GB/T 37603-2019 |
Medium temperature brazing filler metals of aluminum alloys 铝合金中温钎料 |
China National Standards fill |
English PDF |
| GB/T 20629.3-2019 |
Non-cellulosic papers for electrical purposes—Part 3: Unfilled aramid (aromatic polyamide) papers 电气用非纤维素纸 第3部分：无填充聚芳酰胺纤维纸 |
China National Standards fill |
English PDF |
| GB/T 37210-2018 |
Nuclear radiation-resistant inflatable and water-filled rubber sealing products 耐核辐射充气和充水橡胶密封制品 |
China National Standards fill |
English PDF |
| GB/T 51312-2018 |
Design standard for ship LNG filling station 船舶液化天然气加注站设计标准 |
China National Standards fill |
English PDF |
| GB/T 10046-2018 |
Silver brazing filler metals 银钎料 |
China National Standards fill |
English PDF |
| GB/T 21290-2018 |
Quick frozen tilapia fillets 冻罗非鱼片 |
China National Standards fill |
English PDF |
| GB/T 36418-2018 |
Determination of volatile organic compounds for products with filling materials 絮用纤维制品有机挥发性物质的测定 |
China National Standards fill |
English PDF |
| GB/T 36534-2018 |
Foamed concrete blocks filled with ceramsite 陶粒发泡混凝土砌块 |
China National Standards fill |
English PDF |
| GB/T 18772-2017 |
Technical requirement for environmental monitory on municipal solid waste sanitary landfill 生活垃圾卫生填埋场环境监测技术要求 |
China National Standards fill |
English PDF |
| GB/T 18364-2017 |
filling receptacle of LPG vehicle 汽车用液化石油气加气口 |
China National Standards fill |
English PDF |
| GB/T 14194-2017 |
Rules for filling of compressed gas cylinders 压缩气体气瓶充装规定 |
China National Standards fill |
English PDF |
| GB/T 34526-2017 |
Rules for filling of gas mixture cylinder 混合气体气瓶充装规定 |
China National Standards fill |
English PDF |
| GB/T 34528-2017 |
Regulation for filling of cylinder bundle 气瓶集束装置充装规定 |
China National Standards fill |
English PDF |
| GB/T 18363-2017 |
filling receptacle of CNG vehicle 汽车用压缩天然气加气口 |
China National Standards fill |
English PDF |
| GB/T 5742-2017 |
filling connection for drinking water tanks on ships 船用饮水舱注入接头 |
China National Standards fill |
English PDF |
| GB/T 18762-2017 |
Specification for filler brazing materials made of precious metal and their alloy 贵金属及其合金钎料规范 |
China National Standards fill |
English PDF |
| GB/T 22381-2017 |
Cable connections between gas-insulated metal-enclosed switchgear for rated voltages equal to and above 72.5kV and fluid-filled and extruded insulation power cables—Fluid-filled and dry type cable-terminations 额定电压72.5kV及以上气体绝缘金属封闭开关设备与充流体及挤包绝缘电力电缆的连接 充流体及干式电缆终端 |
China National Standards fill |
English PDF |
| GB/T 33753-2017 |
General specification for rotary automatic filling-capping machine for high viscosity fluid 回转式全自动粘流体灌装封盖机通用技术要求 |
China National Standards fill |
English PDF |
| GB/T 2662-2017 |
Clothes with fillings 棉服装 |
China National Standards fill |
English PDF |
| GB 51220-2017 |
Technical code for municipal solid waste sanitary landfill closure 生活垃圾卫生填埋场封场技术规范 |
China National Standards fill |
English PDF |
| GB/T 3836.7-2017 |
Explosive atmospheres—Part 7: Equipment protection by powder filling “q” 爆炸性环境 第7部分：由充砂型“q”保护的设备 |
China National Standards fill |
English PDF |
| GB/T 22380.1-2017 |
Explosion protected safety technique of the petrol filling station—Part 1: Explosion protected safety technique requirements for fuel filling dispenser 燃油加油站防爆安全技术 第1部分：燃油加油机防爆安全技术要求 |
China National Standards fill |
English PDF |
| GB/T 33472-2016 |
General specification for carbonated beverages filling-capping machine 含气饮料灌装封盖机通用技术要求 |
China National Standards fill |
English PDF |
| GB/T 33467-2016 |
General specification for automatic blowing-filling-capping bloc 全自动吹瓶灌装旋盖一体机通用技术要求 |
China National Standards fill |
English PDF |
| GB/T 13679-2016 |
Manganese base brazing filler metal 锰基钎料 |
China National Standards fill |
English PDF |
| GB/T 32017-2015 |
Roller ball pens and refills 水性墨水圆珠笔和笔芯 |
China National Standards fill |
English PDF |
| GB/T 51064-2015 |
Technical code for ground treatment of hydraulic fill 吹填土地基处理技术规范 |
China National Standards fill |
English PDF |
| GB/T 32017-2015 |
Roller ball pens and refills 水性墨水圆珠笔和笔芯 |
China National Standards fill |
English PDF |
| GB/T 30639-2014 |
General technical specification of automatic metal canned sauce(syrup) filling and sealing machine 全自动金属罐浓酱（浆）灌装封罐机通用技术条件 |
China National Standards fill |
English PDF |
| GB/T 30638-2014 |
Jelly cup filling and sealing machine 杯装果冻包装机 |
China National Standards fill |
English PDF |
| GB/T 22180-2014 |
Quick frozen fish fillets-breaded or in batter 冻裹面包屑鱼 |
China National Standards fill |
English PDF |
| GB/T 30968.2-2014 |
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 2: Test method of filled-hole tension and compression 聚合物基复合材料层合板开孔/受载孔性能试验方法 第2部分：充填孔拉伸和压缩试验方法 |
China National Standards fill |
English PDF |
| GB 30736-2014 |
The limitation on infilling components of sea reclamation and enclosure project 围填海工程填充物质成分限值 |
China National Standards fill |
English PDF |
| GB 50936-2014 |
Technical code for concrete filled steel tubular structures 钢管混凝土结构技术规范 |
China National Standards fill |
English PDF |
| GB/T 30400-2013 |
Safety and hygiene requirements of filling materials in toys 玩具填充物安全和卫生要求 |
China National Standards fill |
English PDF |
| GB/T 30209-2013 |
Aircraft―Gravity filling orifices 飞机 重力加油口 |
China National Standards fill |
English PDF |
| GB/T 2679.12-2013 |
Paper and board―Qualitative analysis of mineral filler and mineral coating―Chemical method 纸和纸板 无机填料和无机涂料的定性分析 化学法 |
China National Standards fill |
English PDF |
| GB/T 30058-2013 |
Rules for record filling and enquiry of international multi-model transportation documents 国际多式联运单据备案与查询规则 |
China National Standards fill |
English PDF |
| GB 50923-2013 |
Technical code for concrete-filled steel tube arch bridges 钢管混凝土拱桥技术规范 |
China National Standards fill |
English PDF |
| GB 50869-2013 |
Technical code for municipal solid waste sanitary landfill 生活垃圾卫生填埋处理技术规范 |
China National Standards fill |
English PDF |
| GB/T 29018-2012 |
Soft tube filling and sealing machine 软管灌装封尾机 |
China National Standards fill |
English PDF |
| GB/T 29016-2012 |
Linear filling machine with high viscosity fluid 直线式粘流体灌装机 |
China National Standards fill |
English PDF |
| GB/T 28819-2012 |
Aluminium alloy enclosures for gas-filled high-voltage switchgear 充气高压开关设备用铝合金外壳 |
China National Standards fill |
English PDF |
| GB 50156-2012 |
Code for design and construction of filling station 汽车加油加气站设计与施工规范 |
China National Standards fill |
English PDF |
| GB/T 16163-2012 |
Classification of gases filled in cylinder 瓶装气体分类 |
China National Standards fill |
English PDF |
| GB 28052-2011 |
Regulation for filling of non-refillable steel welded cylinder 非重复充装焊接钢瓶充装规定 |
China National Standards fill |
English PDF |
| GB 28051-2011 |
Regulation for filling of welded insulated cylinder 焊接绝热气瓶充装规定 |
China National Standards fill |
English PDF |
| GB/T 28199-2011 |
Oil-filled radiator 电热油汀 |
China National Standards fill |
English PDF |
| GB/T 27871-2011 |
Sanitary landfill compactor 垃圾填埋压实机 |
China National Standards fill |
English PDF |
| GB/T 27738-2011 |
Automatic gravimetric filling instruments 重力式自动装料衡器 |
China National Standards fill |
English PDF |
| GB/T 28178-2011 |
Landfill disposal for very low level radioactive waste 极低水平放射性废物的填埋处置 |
China National Standards fill |
English PDF |
| GB/T 15022.5-2011 |
Resin based reactive compounds used for electrical insulation - Part 5：Quartz filled epoxy resinous compounds 电气绝缘用树脂基活性复合物 第5部分：石英填料环氧树脂复合物 |
China National Standards fill |
English PDF |
| GB/T 15022.3-2011 |
Resin based reactive compounds used for electrical insulation - Part 3: Unfilled epoxy resinous compounds 电气绝缘用树脂基活性复合物 第3部分：无填料环氧树脂复合物 |
China National Standards fill |
English PDF |
| GB/T 27636-2011 |
Code of practice for quick frozen tilapia fillets 冻罗非鱼片加工技术规范 |
China National Standards fill |
English PDF |
| GB 27550-2011 |
Safety specification for filling station of gas cylinders 气瓶充装站安全技术条件 |
China National Standards fill |
English PDF |
| GB/T 28025-2011 |
Determination of the residual chlorine in products with filling materials - Water extraction method 絮用纤维制品余氯测试方法 水萃取法 |
China National Standards fill |
English PDF |
| GB/T 28024-2011 |
Determination of sensory odours for products with filling materials 絮用纤维制品异味的测定 |
China National Standards fill |
English PDF |
| GB/T 28023-2011 |
Determination of the antimicrobial agent residues for products with filling materials 絮用纤维制品抗菌整理剂残留量的测定 |
China National Standards fill |
English PDF |
| GB/T 26995-2011 |
General specification for rinsing-filling-capping machine of plastic bottle 塑料瓶冲洗灌装旋盖机通用技术条件 |
China National Standards fill |
English PDF |
| GB/T 26994-2011 |
Plastic cup forming filling sealing machine 塑杯成型灌装封切机 |
China National Standards fill |
English PDF |
| GB/T 26993-2011 |
filling and packaging machine for milk powder 奶粉定量充填包装机 |
China National Standards fill |
English PDF |
| GB/T 26714-2011 |
Ball point pens and refills 油墨圆珠笔和笔芯 |
China National Standards fill |
English PDF |
| GB/T 26700-2011 |
Rigid polyurethane（PUR）cellular plastics used for doors filling 门体填充用硬质聚氨酯泡沫塑料 |
China National Standards fill |
English PDF |
| GB/T 25986-2010 |
filling device of natural gas vehicles 汽车用液化天然气加注装置 |
China National Standards fill |
English PDF |
| GB 25684.11-2010 |
Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors 土方机械 安全 第11部分：土方回填压实机的要求 |
China National Standards fill |
English PDF |
| GB/T 25774.3-2010 |
Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验 |
China National Standards fill |
English PDF |
| GB/T 14780-2010 |
Earth-moving machinery - Drain，fill and level plugs 土方机械 排液、加液和液位螺塞 |
China National Standards fill |
English PDF |
| GB 22380.3-2010 |
Explosion protected safety technique of the petrol filling station - Part 3: Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards fill |
English PDF |
| GB 22380.2-2010 |
Explosion protected safety technique of the petrol filling station - Part 2: Safety requirements for construction and performance of safe breaks for use on dispensers 燃油加油站防爆安全技术 第2部分：加油机用安全拉断阀结构和性能的安全要求 |
China National Standards fill |
English PDF |
| GB 50628-2010 |
Code for quality acceptance of the concrete filled steel tubular engineering 钢管混凝土工程施工质量验收规范 |
China National Standards fill |
English PDF |
| GB/T 25266-2010 |
Paints - Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method 涂料 用安德森滴管法测定涂料填充物颗粒粒度的分布 |
China National Standards fill |
English PDF |
| GB/T 25179-2010 |
Technical requirements for site utilization after stabilization in municipal solid waste landfill 生活垃圾填埋场稳定化场地利用技术要求 |
China National Standards fill |
English PDF |
| GB/T 17313-2009 |
General specification of bag forming, filling and sealing machine 袋成型-充填-封口机通用技术条件 |
China National Standards fill |
English PDF |
| GB/T 24496-2009 |
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels - Laboratory mechanical tests - Effect of tangential loading 钢筋混凝土大板间有连接筋并用混凝土浇灌的键槽式竖向接缝 实验室力学试验 平面内切向荷载的影响 |
China National Standards fill |
English PDF |
| GB/T 24571-2009 |
Aseptic PET bottles cold-filling line PET瓶无菌冷灌装生产线 |
China National Standards fill |
English PDF |
| GB/T 24570-2009 |
Aseptic bag forming-filling-sealing machine 无菌袋成型灌装封口机 |
China National Standards fill |
English PDF |
| GB 17878-2009 |
Cylinder valve for non-refillable steel welded industry cylinder 工业用非重复充装焊接钢瓶用瓶阀 |
China National Standards fill |
English PDF |
| GB 17268-2009 |
Non-refillable steel welded cylinders for industrial use 工业用非重复充装焊接钢瓶 |
China National Standards fill |
English PDF |
| GB 14193-2009 |
Rules for filling of liquefied gas cylinders 液化气体气瓶充装规定 |
China National Standards fill |
English PDF |
| GB 13591-2009 |
Rules for the filling of dissolved acetylene cylinders 溶解乙炔气瓶充装规定 |
China National Standards fill |
English PDF |
| GB/T 23857-2009 |
Monitoring and testing in municipal solid waste landfill degradation treatment 生活垃圾填埋场降解治理的监测与检测 |
China National Standards fill |
English PDF |
| GB/T 13465.7-2009 |
Test method of the rates of body weight gain and porefilling of impermeable graphite 不透性石墨增重率和填孔率试验方法 |
China National Standards fill |
English PDF |
| GB/T 23485-2009 |
The disposal of sludge from municipal wastewater treatment plant - Quality of sludge for co-landfilling 城镇污水处理厂污泥处置 混合填埋用泥质 |
China National Standards fill |
English PDF |
| GB 13398-2008 |
Insulating hollow tubes and foam-filled tubes and solid rods for live working 带电作业用空心绝缘管、泡沫填充绝缘管和实心绝缘棒 |
China National Standards fill |
English PDF |
| GB/T 23154-2008 |
Safety requirements and test methods of filling materials in toys for import and export 进出口玩具填充材料安全要求及测试方法 |
China National Standards fill |
English PDF |
| GB/T 22381-2008 |
Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above - Fluid-filled and extruded insulation power cables - Fluid-filled and dry type cable-terminations 额定电压 72.5kV 及以上气体绝缘金属封闭开关设备与充流体及挤包绝缘电力电缆的连接 充流体及干式电缆终端 |
China National Standards fill |
English PDF |
| GB 22380.1-2008 |
Explosion protected safety technique of the petrol filling station - Part 1: Explosion protected safety technique requirements for fuel filling dispenser 燃油加油站防爆安全技术 第1部分：燃油加油机防爆安全技术要求 |
China National Standards fill |
English PDF |
| GB/T 2679.11-2008 |
Paper and board - qualitative analysis of mineral filler and mineral coating - SEM/EDAX method 纸和纸板中无机填料和无机涂料的定性分析 电子显微镜/X射线能谱法 |
China National Standards fill |
English PDF |
| GB/T 1844.2-2008 |
Plastic-Symbols and abbreviated-Part 2: fillers and reinforcing materials 塑料 符号和缩略语 第2部分：填充及增强材料 |
China National Standards fill |
English PDF |
| GB/T 9326.5-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 5: Pressure tanks 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第5部分: 压力供油箱 |
China National Standards fill |
English PDF |
| GB/T 9326.4-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 4: Joint 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第4部分: 接头 |
China National Standards fill |
English PDF |
| GB/T 9326.3-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 3: Sealing end 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第3部分: 终端 |
China National Standards fill |
English PDF |
| GB/T 9326.2-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 2：Oil-filled paper insulated, lead-sheathed cables for alternating voltages up to and including 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第2部分: 交流500kV及以下纸绝缘铅套充油电缆 |
China National Standards fill |
English PDF |
| GB/T 9326.1-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500kV - Part 1: Test 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第1部分: 试验 |
China National Standards fill |
English PDF |
| GB/T 2951.51-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component 电缆和光缆绝缘和护套材料通用试验方法 第51部分：填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率 |
China National Standards fill |
English PDF |
| GB/T 6418-2008 |
Copper base brazing filler metals 铜基钎料 |
China National Standards fill |
English PDF |
| GB/T 13815-2008 |
Aluminium base brazing filler metals 铝基钎料 |
China National Standards fill |
English PDF |
| GB/T 10859-2008 |
Nickel base brazing filler metals 镍基钎料 |
China National Standards fill |
English PDF |
| GB/T 18772-2008 |
Technical requirement for environmental monitor on sanitary landfill site of domestic refuse 生活垃圾卫生填埋场环境监测技术要求 |
China National Standards fill |
English PDF |
| GB/T 11364-2008 |
Test method of wettability for brazing filler metals 钎料润湿性试验方法 |
China National Standards fill |
English PDF |
| GB/T 10046-2008 |
Silver brazing filler metals 银钎料 |
China National Standards fill |
English PDF |
| GB 16889-2008 |
Standard for pollution control on the landfill site of municipal solid waste 生活垃圾填埋场污染物控制标准 |
China National Standards fill |
English PDF |
| GB/T 21290-2007 |
Quick frozen tilapia fillets 冻罗非鱼片 |
China National Standards fill |
English PDF |
| GB/T 21270-2007 |
filling of foods 食品馅料 |
China National Standards fill |
English PDF |
| GB 20952-2007 |
Emission standard of air pollutant for gasoline filling stations 加油站大气污染物排放标准 |
China National Standards fill |
English PDF |
| GB/T 20859-2007 |
Packaging - Sacks - Determination of the friction of filled sacks 包装 袋 满装袋摩擦力的测定 |
China National Standards fill |
English PDF |
| GB 18383-2007 |
General technical requirements for products with filling materials 絮用纤维制品通用技术要求 |
China National Standards fill |
English PDF |
| GB 14194-2006 |
Rules for filling of permanent gas cylinders 永久气体气瓶充装规定 |
China National Standards fill |
English PDF |
| GB/T 18364.2-2005 |
filling receptacle of LPG vehicle-Part 2:Insert 汽车用液化石油气加气口 第2部分:快插式 |
China National Standards fill |
English PDF |
| GB 3836.7-2004 |
Electrical apparatus for explosive gas atmospheres--Part 7:Powder filling“q” 爆炸性气体环境用电气设备 第7部分:充砂型“q” |
China National Standards fill |
English PDF |
| GB/T 7920.5-2003 |
Earth-moving machinery--Rollers and landfill compactors--Terminology and commercial specification 土方机械 压路机和回填压实机 术语和商业规格 |
China National Standards fill |
English PDF |
| GB/T 18762-2002 |
filler precious metal and their alloy brazing materials 贵金属及其合金钎料 |
China National Standards fill |
English PDF |
| GB/T 18678-2002 |
Equipment for crop protection--Agriculture spray--Nominal capacity of spray tank and diameter of filling 植物保护机械 农业喷雾机(器)药液箱额定容量和加液孔直径 |
China National Standards fill |
English PDF |
| GB 18598-2001 |
Standard for pollution control on the security landfill site for hazardous wastes 危险废物填埋污染控制标准 |
China National Standards fill |
English PDF |
| GB/T 18364.1-2001 |
filling receptacle of LPG vehicle(Spird) 汽车用液化石油气加气口(螺旋式) |
China National Standards fill |
English PDF |
| GB/T 18363-2001 |
filling receptacle of CNG vehicle 汽车用压缩天然气加气口 |
China National Standards fill |
English PDF |
| GB/T 5742-1999 |
filling connection for drinking water tanks on ships 船用饮水舱注入接头 |
China National Standards fill |
English PDF |
| GB/T 13849.4-1993 |
Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 4:Unfilled，moisture barrier polyethylene sheathed local telecommunication cables with copper conductors，solid polyolefin insulation and integral suspension strand 聚烯烃绝缘聚烯烃护套市内通信电缆 第4部分:铜芯、实心聚烯烃绝缘(非填充)自承式、挡潮层聚乙烯护套市内通信电缆 |
China National Standards fill |
English PDF |
| GB/T 13849.3-1993 |
Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 3:filled，moisture barrier polyethylene sheathed local telecommunication cables with copper conductors and solid or cellular polyolefin insulation 聚烯烃绝缘聚烯烃护套市内通信电缆 第3部分:铜芯、实心或泡沫(带皮泡沫)聚烯烃绝缘、填充式、挡潮层聚乙烯护套市内通信电缆 |
China National Standards fill |
English PDF |
| GB/T 13849.2-1993 |
Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 2:Unfilled，moisture barrier polyethylene sheathed local telecommunication cables with copper conductors and solid or cellular polyolefin insulation 聚烯烃绝缘聚烯烃护套市内通信电缆 第2部分:铜芯、实心或泡沫(带皮泡沫)聚烯烃绝缘、非填充式、挡潮层聚乙烯护套市内通信电缆 |
China National Standards fill |
English PDF |
| GB/T 14186-1993 |
Generic specification for gas-filled voltage stabilizing tubes 充气稳压管总规范(可供认证用) |
China National Standards fill |
English PDF |
| GB/T 14111-1993 |
Blank detail specificationfor thyratorns and gas-filled rectifier tubes 闸流管与充气整流管空白详细规范 (可供认证用) |
China National Standards fill |
English PDF |
| GB/T 14110-1993 |
General specification for thyratrons and gas-filled rectifier tubes 闸流管与充气整流管总规范 (可供认证用) |
China National Standards fill |
English PDF |
| GB/T 13679-1992 |
Manganese base brazing filler metals 锰基钎料 |
China National Standards fill |
English PDF |
| GB/T 4857.1-1992 |
Packaging--Complete，filled transport packages--Identification of parts when testing 包装 运输包装件 试验时各部位的标示方法 |
China National Standards fill |
English PDF |
| GB/T 12765-1991 |
Spherical plain bearings，joint type--Abutment andfillet dimensions 关节轴承 安装尺寸 |
China National Standards fill |
English PDF |
| GB/T 11326.4-1989 |
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--filled cables with copper conductors 聚烯烃绝缘铝-聚烯烃粘结护套高频农村通信电缆 铜芯填充电缆 |
China National Standards fill |
English PDF |
| GB/T 11326.2-1989 |
High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath--Unfilled cables with copper conductors 聚烯烃绝缘铝-聚烯烃粘结护套高频农村通信电缆 铜芯非填充电缆 |
China National Standards fill |
English PDF |
| GB/T 9506.3-1988 |
Test method for barium content in getter fill and getter film of barium flash getter 蒸散型钡吸气剂载料和膜中钡量的测定 |
China National Standards fill |
English PDF |
| GB 6951-1986 |
Safe surface voltage of light fuel oil in tank filling operation 轻质油品装油安全油面电位值 |
China National Standards fill |
English PDF |
| Find out:169Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
