Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 46824-2025 |
Cement-Based Reinforced Truss Floor Decking for Rural Housing (No Formwork Removal Required) {译} 农村房屋用水泥基免拆底模钢筋桁架楼承板 |
China National Standards force |
 English PDF |
| GB/T 33803-2025 |
Technical Specifications for Corrosion-Resistant Application of Reinforced Concrete Inhibitors {译} 钢筋混凝土阻锈剂耐蚀应用技术规范 |
China National Standards force |
English PDF |
| GB/T 6074-2025 |
Plate Chains, Connecting Links, and Sprockets - Dimensions, Measured forces, Tensile Load, and Dynamic Load {译} 板式链、连接环和槽轮 - 尺寸、测量力、抗拉载荷和动载载荷 |
China National Standards force |
English PDF |
| GB/T 46613-2025 |
Corrosion of Metals and Alloys - Determination and Evaluation of Corrosion of Steel Reinforcement in Concrete Structures in Marine Environments {译} 金属和合金的腐蚀 - 海洋环境全腐蚀区混凝土结构中钢筋锈蚀测定及评定方法 |
China National Standards force |
English PDF |
| GB/T 46444-2025 |
Test Method for High-Temperature Tensile-Tensile Fatigue Properties of Carbon Fiber Reinforced Ceramic Matrix Composites {译} 碳纤维增强陶瓷基复合材料高温拉-拉疲劳性能试验方法 |
China National Standards force |
English PDF |
| GB/T 19407-2025 |
Agricultural Tractors - Maximum Operating force for Control Devices {译} 农业拖拉机 - 操纵装置最大操纵力 |
China National Standards force |
English PDF |
| GB/T 4133-2025 |
Machine Tools - Morse Taper forced Drive {译} 机床 - 莫氏圆锥强制传动 |
China National Standards force |
English PDF |
| GB/T 46222-2025 |
Determination of Mixed Interlaminar Fracture Toughness for Type I-III Fiber-Reinforced Plastic Composites {译} 纤维增强塑料复合材料I型-III型混合层间断裂韧性的测定 |
China National Standards force |
English PDF |
| GB/T 46221-2025 |
Determination of Interlaminar Fracture Toughness for Type III Fiber-Reinforced Plastic Composites {译} 纤维增强塑料复合材料III型层间断裂韧性的测定 |
China National Standards force |
English PDF |
| GB/T 46220-2025 |
Test Method for Initiation of Fatigue Delamination Propagation in Type I Fiber-Reinforced Plastic Composites {译} 纤维增强塑料复合材料I型疲劳分层扩展起始的试验方法 |
China National Standards force |
English PDF |
| GB/T 46200-2025 |
Determination of Ultra-Low Temperature Coefficient of Linear Expansion for Fiber-Reinforced Polymer Matrix Composites {译} 纤维增强聚合物基复合材料超低温线膨胀系数的测定 |
China National Standards force |
English PDF |
| GB/T 46233-2025 |
Fiber-Reinforced Cement Products - Sampling and Inspection {译} 纤维增强水泥制品 - 抽样与检验 |
China National Standards force |
English PDF |
| GB/T 46201-2025 |
Fiber-Reinforced Composites - Determination of Interlaminar Fracture Toughness of Unidirectional Reinforcements Type I-II Hybrid {译} 纤维增强复合材料 - 单向增强材料Ⅰ型-Ⅱ型混合层间断裂韧性的测定 |
China National Standards force |
English PDF |
| GB/T 20462.1-2025 |
Thermoplastic Non-Reinforced Hoses and Hose Assemblies for Automotive Applications - Part 1: Non-Fuel Applications {译} 汽车用热塑性非增强软管和软管-第1部分: - 非燃油用 |
China National Standards force |
English PDF |
| GB/T 33953-2025 |
Corrosion-Resistant Steel Bars for Reinforced Concrete {译} 钢筋混凝土用耐蚀钢筋 |
China National Standards force |
English PDF |
| GB/T 46065-2025 |
Continuous Fiber Reinforced Ceramic Matrix Composites - Test Method for Axial Tensile Properties of Tubes at Room Temperature {译} 连续纤维增强陶瓷基复合材料 - 管材室温轴向拉伸性能试验方法 |
China National Standards force |
English PDF |
| GB/T 46063-2025 |
Continuous Fiber Reinforced Ceramic Matrix Composites Test Method for Room Temperature Tensile Properties of Tubes {译} 连续纤维增强陶瓷基复合材料 - 管材室温环向拉伸性能试验方法 |
China National Standards force |
English PDF |
| GB/T 15908-2025 |
Plastic Hoses and Hose Assemblies Fabric-Reinforced for Hydraulic Applications Specification {译} 塑料软管及软管组合件-液压用织物增强型-规范 |
China National Standards force |
English PDF |
| GB/T 14520-2025 |
Determination of Residual Styrene Monomer and Other Volatile Aromatic Hydrocarbons in Reinforced Plastics Based on Unsaturated Polyester Resins - Gas Chromatography Method {译} 不饱和聚酯树脂基增强塑料中残留苯乙烯单体及其他挥发性芳烃含量的测定-气相色谱法 |
China National Standards force |
English PDF |
| GB/T 46049-2025 |
Rubber or Plastic-Coated Fabrics - Physical and Mechanical Properties - Determination of Bending force {译} 橡胶或塑料涂覆织物-物理机械性能试验-弯曲力的测定 |
China National Standards force |
English PDF |
| GB/T 46121-2025 |
Performance Test Method for forced Air-Cooled Refrigerant Condensers {译} 强制风冷制冷剂冷凝器性能试验方法 |
China National Standards force |
English PDF |
| GB/T 41762.1-2025 |
Fiber-reinforced plastic composites - Determination of through-thickness properties of laminates - Part 1: Direct tension and compression tests {译} 纤维增强塑料复合材料-层合板厚度方向性能的测定-第1部分：直接拉伸和压缩试验 |
China National Standards force |
English PDF |
| GB/T 11182-2025 |
Steel Wire for Rubber Hose Reinforcement {译} 橡胶软管增强用钢丝 |
China National Standards force |
English PDF |
| GB/T 35156-2025 |
Fiber-Reinforced Composite Cables for Structural Use {译} 结构用纤维增强复合材料拉索 |
China National Standards force |
English PDF |
| GB/T 8237-2025 |
Liquid Unsaturated Polyester Resins for Fiber-Reinforced Plastics {译} 纤维增强塑料用液体不饱和聚酯树脂 |
China National Standards force |
English PDF |
| GB/T 45770-2025 |
Surface Chemical Analysis - Atomic force Microscopy - In-situ Characterization Procedure for Atomic Force Microscope Probe Shank Profile for Nanostructure Measurement {译} 表面化学分析-原子力显微术-用于纳米结构测量的原子力显微镜探针柄轮廓原位表征程序 |
China National Standards force |
English PDF |
| GB/T 45755-2025 |
Fiber-Reinforced Composite Sheet Pultrusion Dies {译} 纤维增强复合材料板材拉挤成型模 |
China National Standards force |
English PDF |
| GB/T 45711.2-2025 |
Leather - Determination of tear force - Part 2: Double-sided tear {译} 皮革-撕裂力的测定-第2部分：双边撕裂 |
China National Standards force |
English PDF |
| GB/T 45711.1-2025 |
Leather - Determination of tear force - Part 1: Single-sided tear {译} 皮革-撕裂力的测定-第1部分：单边撕裂 |
China National Standards force |
English PDF |
| GB/T 45694-2025 |
Test methods for natural fiber reinforced plastic composite (NFC) panels {译} 天然纤维增强塑料复合（NFC）板试验方法 |
China National Standards force |
English PDF |
| GB/T 21711.3-2025 |
Basic Electromechanical Relays - Part 3: forced Positioning (Mechanical Interlocking) Contact Relays {译} 基础机电继电器-第3部分：强制定位（机械联锁）触点继电器 |
China National Standards force |
English PDF |
| GB/T 43852-2024 |
Steel-reinforced Plastic Composite Pressure Pipes for Hot and Cold Water {译} 冷热水用钢增强塑料复合压力管 |
China National Standards force |
English PDF |
| GB/T 45331-2025 |
Polytetrafluoroethylene Membranes for Proton Exchange Membrane Reinforcement {译} 质子交换膜增强用聚四氟乙烯膜 |
China National Standards force |
English PDF |
| GB/T 45129-2025 |
Determination of the Strength of Reinforced Yarn in Cement {译} 增强纱线在水泥中强度的测定 |
China National Standards force |
English PDF |
| GB/T 45154-2024 |
Aging society - General requirements and guidelines for age-inclusive workforce {译} 老龄化社会-年龄包容性劳动力通用要求与指南 |
China National Standards force |
English PDF |
| GB/T 45011-2024 |
Test method for impact failure of fiber-reinforced composites {译} 纤维增强复合材料冲击失效试验方法 |
China National Standards force |
English PDF |
| GB/T 45006-2024 |
Fiber-reinforced composite pultruded sheets for wind turbine blades {译} 风电叶片用纤维增强复合材料拉挤板材 |
China National Standards force |
English PDF |
| GB/T 13888-2024 |
Methods for measuring the coercive force of magnetic materials (up to 160 kA/m) in an open magnetic circuit {译} 在开磁路中测量磁性材料矫顽力（至160kA/m）的方法 |
China National Standards force |
English PDF |
| GB/T 44308-2024 |
Determination of component content and pore content of carbon fiber and glass fiber composite reinforced plastics {译} 碳纤维和玻璃纤维组合增强塑料组分含量和孔隙含量的测定 |
China National Standards force |
English PDF |
| GB/T 44307-2024 |
Carbon fiber reinforced plastics - Determination of fiber mass content - Thermogravimetric analysis (TG) {译} 碳纤维增强塑料-纤维质量含量的测定-热重分析法（TG） |
China National Standards force |
English PDF |
| GB/T 44302-2024 |
Carbon fiber reinforced plastic and metal assemblies - Determination of tensile lap shear strength {译} 碳纤维增强塑料和金属组合件-拉伸搭接剪切强度的测定 |
China National Standards force |
English PDF |
| GB/T 44356-2024 |
Clamping force of die-casting machines - Test methods {译} 压铸机锁模力-测试方法 |
China National Standards force |
English PDF |
| GB/T 4706.34-2024 |
Safety of household and similar electrical appliances - Part 34: Particular requirements for commercial electric forced convection ovens, steam cookers and steam convection ovens {译} 家用和类似用途电器的安全-第34部分：商用电强制对流烤炉、蒸汽炊具和蒸汽对流炉的特殊要求 |
China National Standards force |
English PDF |
| GB-1499.2-2024 |
Steel for reinforced concrete-Part 2: Hot-rolled ribbed steel bars {译} 钢筋混凝土用钢-第2部分：热轧带肋钢筋 |
China National Standards force |
English PDF |
| GB-1499.1-2024 |
Steel for reinforced concrete-Part 1: Hot-rolled plain round steel bars {译} 钢筋混凝土用钢-第1部分：热轧光圆钢筋 |
China National Standards force |
English PDF |
| GB/T 29324-2024 |
Carbon fiber reinforced composite cores for overhead wires {译} 架空导线用碳纤维增强复合材料芯 |
China National Standards force |
English PDF |
| GB/T 43938.1-2024 |
Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 1: Tensile test {译} 碳纤维增强复合材料薄壁管件力学性能试验方法-第1部分：拉伸试验 |
China National Standards force |
English PDF |
| GB/T 43938.2-2024 |
Test method for mechanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 2: Compression test {译} 碳纤维增强复合材料薄壁管件力学性能试验方法-第2部分：压缩试验 |
China National Standards force |
English PDF |
| GB/T 43765-2024 |
Aerospace functional coating-Partial reinforced metal matrix composite welding coating {译} 航天功能镀覆层-颗粒增强金属基复合材料焊接镀覆层 |
China National Standards force |
English PDF |
| GB/T 43601-2024 |
Mobile lifting work platform-Operator control Control device - operating force, operating direction, operating position and operating method {译} 移动式升降工作平台-操作人员控制装置-操作力、操作方向、操作位置和操作方法 |
China National Standards force |
English PDF |
| GB/T 43667-2024 |
Technical specifications for reinforced concrete corrosion monitoring and detection {译} 钢筋混凝土腐蚀监检测技术规范 |
China National Standards force |
English PDF |
| GB/T 43665-2024 |
Hot-rolled rare earth steel bars for reinforced concrete {译} 钢筋混凝土用热轧稀土钢筋 |
China National Standards force |
English PDF |
| GB/T 43852-2024 |
Steel reinforced plastic composite pressure pipe for hot and cold water {译} 冷热水用钢增强塑料复合压力管 |
China National Standards force |
English PDF |
| GB/T 5019.13-2023 |
Mica-based insulation materials Part 13: High thermal conductivity glass cloth reinforced low-adhesive mica tape {译} 以云母为基的绝缘材料 第13部分：高导热性玻璃布补强少胶云母带 |
China National Standards force |
English PDF |
| GB/T 43376-2023 |
Aerospace Heat treatable reinforced stainless steel parts surface cleaning {译} 航空航天 可热处理强化不锈钢零件表面清理 |
China National Standards force |
English PDF |
| GB/T 29165.4-2023 |
Oil and gas industry Glass fiber reinforced plastic pipes Part 4: Assembly, installation and operation {译} 石油天然气工业 玻璃纤维增强塑料管 第4部分：装配、安装与运行 |
China National Standards force |
English PDF |
| GB/T 29165.3-2023 |
Oil and gas industry Glass fiber reinforced plastic pipes Part 3: System design {译} 石油天然气工业 玻璃纤维增强塑料管 第3部分：系统设计 |
China National Standards force |
English PDF |
| GB/T 43308-2023 |
Glass fiber reinforced thermoplastic unidirectional prepreg {译} 玻璃纤维增强热塑性单向预浸料 |
China National Standards force |
English PDF |
| GB/T 15231-2023 |
Test methods for properties of glass fiber reinforced cement {译} 玻璃纤维增强水泥性能试验方法 |
China National Standards force |
English PDF |
| GB/T 41312.2-2023 |
Permeability testing methods for chemical industry equipment Part 2: Fiber reinforced thermosetting plastic equipment {译} 化工用设备渗透性检测方法 第2部分：纤维增强热固性塑料设备 |
China National Standards force |
English PDF |
| GB/T 43199-2023 |
Robot multi-dimensional force/torque sensor detection specifications {译} 机器人多维力/力矩传感器检测规范 |
China National Standards force |
English PDF |
| GB/T 43144-2023 |
Nondestructive testing Acoustic emission testing Testing methods for damage assessment of reinforced concrete beams {译} 无损检测 声发射检测 钢筋混凝土梁损伤评定的检测方法 |
China National Standards force |
English PDF |
| GB/T 43117-2023 |
Glass fiber reinforced thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions {译} 玻璃纤维增强热固性塑料（GRP）管 湿态或干态条件下环蠕变性能的测定 |
China National Standards force |
English PDF |
| GB/T 43116-2023 |
Fiber Reinforced Plastic Composites Composite Standard Certification Scheme including Reduced and Extended Certification {译} 纤维增强塑料复合材料 包括缩减和扩展认证的复合材料标准认证方案 |
China National Standards force |
English PDF |
| GB/T 43113-2023 |
Evaluation method for heat and moisture resistance of carbon fiber reinforced composite materials {译} 碳纤维增强复合材料耐湿热性能评价方法 |
China National Standards force |
English PDF |
| GB/T 43111-2023 |
Carbon materials, fatigue tests, axial force control methods {译} 炭素材料 疲劳试验 轴向力控制方法 |
China National Standards force |
English PDF |
| GB/T 43005-2023 |
Continuous fiberglass tape wrapped reinforced polyethylene composite pipe for water supply {译} 给水用连续玻纤带缠绕增强聚乙烯复合管 |
China National Standards force |
English PDF |
| GB/T 3683-2023 |
Specification for rubber hoses and hose assemblies, wire braid reinforced hydraulic types suitable for oil-based or water-based fluids {译} 橡胶软管及软管组合件 油基或水基流体适用的钢丝编织增强液压型 规范 |
China National Standards force |
English PDF |
| GB/T 26518-2023 |
Polymer reinforced composite waterproof sheet {译} 高分子增强复合防水片材 |
China National Standards force |
English PDF |
| GB/T 19675.2-2023 |
Flexible graphite composite reinforced gasket for pipe flanges Part 2: Class series {译} 管法兰用柔性石墨复合增强垫片 第2部分：Class系列 |
China National Standards force |
English PDF |
| GB/T 19675.1-2023 |
Flexible graphite composite reinforced gaskets for pipe flanges Part 1: PN series {译} 管法兰用柔性石墨复合增强垫片 第1部分：PN系列 |
China National Standards force |
English PDF |
| GB/T 1458-2023 |
Test method for mechanical properties of fiber-wound reinforced composite ring specimens {译} 纤维缠绕增强复合材料环形试样力学性能试验方法 |
China National Standards force |
English PDF |
| GB/T 42911-2023 |
Carbon fiber reinforced composite materials accelerated moisture absorption and supersaturation adjustment method for sealed pressure vessels {译} 碳纤维增强复合材料 密封压力容器加速吸湿和过饱和调节方法 |
China National Standards force |
English PDF |
| GB/T 42655-2023 |
Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix composites {译} 连续纤维增强陶瓷基复合材料高温压缩性能试验方法 |
China National Standards force |
English PDF |
| GB/T 42870-2023 |
Non-destructive testing Acoustic emission testing methods and evaluation criteria for fiber-reinforced polymers {译} 无损检测 纤维增强聚合物的声发射检测方法和评价准则 |
China National Standards force |
English PDF |
| GB/T 42923-2023 |
Glass fiber reinforced plastic products Determination of fiber length {译} 玻璃纤维增强塑料制品 纤维长度的测定 |
China National Standards force |
English PDF |
| GB/T 42920-2023 |
Plastics - Evaluation of fire resistance properties and fire performance of fiber reinforced plastic composites {译} 塑料 纤维增强塑料复合材料耐火特性和防火性能的评定 |
China National Standards force |
English PDF |
| GB/T 42542-2023 |
Fiber-reinforced composite materials, sealed pressure vessel, accelerated moisture absorption and supersaturated state adjustment method {译} 纤维增强复合材料 密封压力容器加速吸湿及过饱和状态调节方法 |
China National Standards force |
English PDF |
| GB/T 8358-2023 |
Steel wire rope - Determination method of breaking force {译} 钢丝绳 破断拉力测定方法 |
China National Standards force |
English PDF |
| GB/T 11836-2023 |
Concrete and Reinforced Concrete Drains {译} 混凝土和钢筋混凝土排水管 |
China National Standards force |
English PDF |
| GB/T 42355.2-2023 |
Anchorage plate reinforcement for reinforced concrete - Part 2: Test methods {译} 钢筋混凝土用锚固板钢筋 第2部分：试验方法 |
China National Standards force |
English PDF |
| GB/T 42355.1-2023 |
Anchorage plate reinforcement for reinforced concrete - Part 1: Specifications {译} 钢筋混凝土用锚固板钢筋 第1部分：技术条件 |
China National Standards force |
English PDF |
| GB/T 42309-2023 |
Reinforcement method of fragile paper files in the restoration process {译} 修复过程中易损毁类纸质档案加固方法 |
China National Standards force |
English PDF |
| GB/T 24721.5-2023 |
Glass fiber reinforced plastic products for road use - Part 5: Base plates for markings {译} 公路用玻璃纤维增强塑料产品 第5部分：标志底板 |
China National Standards force |
English PDF |
| GB/T 24721.4-2023 |
Glass fiber reinforced plastic products for road use - Part 4: Unpressurized communication manhole covers {译} 公路用玻璃纤维增强塑料产品 第4部分：非承压通信井盖 |
China National Standards force |
English PDF |
| GB/T 24721.3-2023 |
Glass fiber reinforced plastic products for road use - Part 3: Pipes {译} 公路用玻璃纤维增强塑料产品 第3部分：管道 |
China National Standards force |
English PDF |
| GB/T 24721.2-2023 |
Glass fiber reinforced plastic products for road use - Part 2: Pipe boxes {译} 公路用玻璃纤维增强塑料产品 第2部分：管箱 |
China National Standards force |
English PDF |
| GB/T 24721.1-2023 |
Glass fiber reinforced plastic products for road use - Part 1: General {译} 公路用玻璃纤维增强塑料产品 第1部分：通则 |
China National Standards force |
English PDF |
| GB/T 18374-2022 |
Reinforcement Terminology {译} 增强材料术语 |
China National Standards force |
English PDF |
| GB/T 41501-2022 |
Determination of interlaminar shear strength and modulus of fiber reinforced plastic composites by double beam method {译} 纤维增强塑料复合材料 双梁法测定层间剪切强度和模量 |
China National Standards force |
English PDF |
| GB/T 41498-2022 |
Test method for in-plane shear stress / shear strain response and shear modulus using shear frames for fiber reinforced plastic composites {译} 纤维增强塑料复合材料 用剪切框测定面内剪切应力/剪切应变响应和剪切模量的试验方法 |
China National Standards force |
English PDF |
| GB/T 38725.1-2022 |
Coiled reinforced plastic pipes - Part 1: General {译} 可盘绕式增强塑料管 第1部分：总则 |
China National Standards force |
English PDF |
| GB/T 10544-2022 |
Rubber hoses and hose assemblies—Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 油基或水基流体适用的钢丝缠绕增强外覆橡胶液压型 规范 |
China National Standards force |
English PDF |
| GB/T 7966-2022 |
Acoustics—Ultrasonic power measurement—Radiation force balances and the requirements 声学 超声功率测量 辐射力天平法及其要求 |
China National Standards force |
English PDF |
| GB/T 4854.3-2022 |
Acoustics—Reference zero for the calibration of audiometric equipment—Part 3：Reference equivalent threshold vibratory force levels for pure tones and bone vibrators 声学 校准测听设备的基准零级 第3部分: 骨振器纯音基准等效阈振动力级 |
China National Standards force |
English PDF |
| GB/T 13564-2022 |
Roller opposite forces type automobile brake tester 滚筒反力式汽车制动检验台 |
China National Standards force |
English PDF |
| GB/T 42211-2022 |
Restoration and reinforcement method of dilapidated and fragile newspaper or periodical cotton net {译} 糟朽、脆弱报纸或期刊棉网修复加固方法 |
China National Standards force |
English PDF |
| GB/T 42252-2022 |
Torque and pretightening force test method of high lock nut for aviation {译} 航空用高锁螺母力矩及预紧力测试方法 |
China National Standards force |
English PDF |
| GB/T 29165.2-2022 |
Oil and gas industry - Glass fiber reinforced plastic pipes - Part 2: Evaluation and manufacture {译} 石油天然气工业 玻璃纤维增强塑料管 第2部分：评定与制造 |
China National Standards force |
English PDF |
| GB/T 29165.1-2022 |
Oil and gas industry - Glass fiber reinforced plastic pipes - Part 1: Vocabulary, symbols, applications and materials {译} 石油天然气工业 玻璃纤维增强塑料管 第1部分：词汇、符号、应用及材料 |
China National Standards force |
English PDF |
| GB/T 1927.21-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 21: Determination of nail holding force {译} 无疵小试样木材物理力学性质试验方法 第21部分：握钉力测定 |
China National Standards force |
English PDF |
| GB/T 22366-2022 |
Sensory analysis - Methodology - General guidelines for the determination of smell, taste and flavor perception thresholds using the three-point forced choice method (3-AFC) {译} 感官分析 方法学 采用三点强迫选择法（3-AFC）测定嗅觉、味觉和风味觉察阈值的一般导则 |
China National Standards force |
English PDF |
| GB/T 12085.3-2022 |
Optics and photonics - Environmental test methods - Part 3: Mechanical forces {译} 光学和光子学 环境试验方法 第3部分：机械作用力 |
China National Standards force |
English PDF |
| GB/T 1499.3-2022 |
Steel for reinforced concrete - Part 3: Welded mesh for reinforcement {译} 钢筋混凝土用钢 第3部分：钢筋焊接网 |
China National Standards force |
English PDF |
| GB/T 41702-2022 |
In situ generation of nanoparticles reinforced 6000 series aluminum matrix composite extrusion {译} 原位生成纳米颗粒增强6000系铝基复合材料挤压材 |
China National Standards force |
English PDF |
| GB/T 16825.1-2022 |
Metallic materials - Inspection and calibration of static uniaxial testing machines - Part 1: Tensile and (or) compression testing machines - Inspection and calibration of force measuring systems {译} 金属材料 静力单轴试验机的检验与校准 第1部分：拉力和（或）压力试验机 测力系统的检验与校准 |
China National Standards force |
English PDF |
| GB/T 21239-2022 |
Test method for compressive properties of fiber reinforced plastic laminates after impact {译} 纤维增强塑料层合板冲击后压缩性能试验方法 |
China National Standards force |
English PDF |
| GB/T 3656-2022 |
Throwing measurement method of coercive force of electromagnetic pure iron and soft magnetic alloy {译} 电磁纯铁及软磁合金矫顽力的抛移测量方法 |
China National Standards force |
English PDF |
| GB/T 41709-2022 |
Carbon fiber reinforced plastics - Determination of size and aspect ratio of pulverized material {译} 碳纤维增强塑料 粉碎料尺寸和长宽比的测定 |
China National Standards force |
English PDF |
| GB/T 41879-2022 |
Plastics - Burning behavior - Medium-scale fire tests of fiber-reinforced polymer composites {译} 塑料 燃烧性能 纤维增强聚合物复合材料的中等尺寸耐火测试 |
China National Standards force |
English PDF |
| GB/T 41762.2-2022 |
Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests {译} 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分：弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 |
China National Standards force |
English PDF |
| GB/T 25826-2022 |
Epoxy coated steel bars for reinforced concrete {译} 钢筋混凝土用环氧涂层钢筋 |
China National Standards force |
English PDF |
| GB/T 28900-2022 |
Test methods for steel for reinforced concrete {译} 钢筋混凝土用钢材试验方法 |
China National Standards force |
English PDF |
| GB/T 40340-2021 |
Composites and metal assemblies—Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests 复合材料与金属组合件 碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验 盐雾试验 |
China National Standards force |
English PDF |
| GB/T 22209-2021 |
Marine no-asbestos fiber reinforced rubber gasket material 船用无石棉纤维增强橡胶垫片材料 |
China National Standards force |
English PDF |
| GB/T 3075-2021 |
Metallic materials—Fatigue testing—Axial force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards force |
English PDF |
| GB/T 40262-2021 |
Metal coating fabric—Determination of metal layer adhesive force—Tape method 金属镀膜织物 金属层结合力的测定 胶带法 |
China National Standards force |
English PDF |
| GB/T 40128-2021 |
Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanosheets 表面化学分析 原子力显微术 二硫化钼片层材料厚度测量方法 |
China National Standards force |
English PDF |
| GB/T 40066-2021 |
Nanotechnologies—Thickness measurement of graphene oxide—Atomic force Microscopy (AFM) 纳米技术 氧化石墨烯厚度测量 原子力显微镜法 |
China National Standards force |
English PDF |
| GB/T 41061-2021 |
Test methods for creep properties of fiber reinforced plastics 纤维增强塑料蠕变性能试验方法 |
China National Standards force |
English PDF |
| GB/T 40815.2-2021 |
Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 2:Method for the determination of forced air cooling 电气和电子设备机械结构 符合英制系列和公制系列机柜的热管理 第2部分：强迫风冷的确定方法 |
China National Standards force |
English PDF |
| GB 55021-2021 |
General Code for Appraisal and Reinforcement of Existing Buildings 既有建筑鉴定与加固通用规范 |
China National Standards force |
English PDF |
| GB/T 38972-2020 |
TiB2 particulate reinforced aluminum alloy powder for additive manufacturing 增材制造用硼化钛颗粒增强铝合金粉 |
China National Standards force |
English PDF |
| GB/T 24328.3-2020 |
Tissue paper and tissue products—Part 3: Determination of tensile strength, stretch at maximum force and tensile energy absorption 卫生纸及其制品 第3部分: 抗张强度、最大力值时伸长率和抗张能量吸收的测定 |
China National Standards force |
English PDF |
| GB/T 39041-2020 |
Carbon steel-fiber reinforced plastic clad bars for reinforcement concrete 钢筋混凝土用碳素钢-纤维增强复合材料复合钢筋 |
China National Standards force |
English PDF |
| GB/T 38901-2020 |
Fiber reinforced concrete shield segments 纤维混凝土盾构管片 |
China National Standards force |
English PDF |
| GB/T 38937-2020 |
Steel for the reinforcement of concrete vocabulary 钢筋混凝土用钢术语 |
China National Standards force |
English PDF |
| GB/T 38725.2-2020 |
Spoolable reinforced plastic pipe一Part 2: Fiber reinforced thermoplastic coiled pipe 可盘绕式增强塑料管 第2部分：纤维增强热塑性塑料连续管 |
China National Standards force |
English PDF |
| GB/T 38537-2020 |
Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method 纤维增强树脂基复合材料超声检测方法 C扫描法 |
China National Standards force |
English PDF |
| GB/T 38535-2020 |
Test method on fiber reinforced resin matrix composites by industrial computed tomography (CT) 纤维增强树脂基复合材料工业计算机层析成像（CT）检测方法 |
China National Standards force |
English PDF |
| GB/T 38534-2020 |
Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 |
China National Standards force |
English PDF |
| GB/T 38515-2020 |
The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials 石英纤维织物增强树脂基复合材料高温力学性能试验方法 |
China National Standards force |
English PDF |
| GB/T 38559-2020 |
Specification of industrial robots force control 工业机器人力控制技术规范 |
China National Standards force |
English PDF |
| GB/T 39549-2020 |
Fiber reinforced thermosetting composites septic tank 纤维增强热固性复合材料化粪池 |
China National Standards force |
English PDF |
| GB/T 39702-2020 |
Test method for force and moment of motor vehicle tyres 汽车轮胎力和力矩试验方法 |
China National Standards force |
English PDF |
| GB/T 39374-2020 |
Leather—Physical and mechanical tests—Determination of bending force 皮革 物理和机械试验 弯折力的测定 |
China National Standards force |
English PDF |
| GB/T 39490-2020 |
Test method for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法 |
China National Standards force |
English PDF |
| GB/T 39484-2020 |
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 |
China National Standards force |
English PDF |
| GB/T 39313-2020 |
Rubber hoses and hose assemblies—Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 输送石油基或水基流体用致密钢丝编织增强液压型 规范 |
China National Standards force |
English PDF |
| GB/T 39311-2020 |
Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification 热塑性软管和软管组合件 液压用钢丝或合成纱线增强单一压力型 规范 |
China National Standards force |
English PDF |
| GB/T 39309-2020 |
Rubber hoses and hose assemblies—Wire- or textile-reinforced single-pressure types for hydraulic applications—Specification 橡胶软管和软管组合件 液压用钢丝或织物增强单一压力型 规范 |
China National Standards force |
English PDF |
| GB/T 39249-2020 |
Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards force |
English PDF |
| GB 51352-2019 |
Engineering technical standard for fiber reinforced plastics chimney 纤维增强塑料排烟筒工程技术标准 |
China National Standards force |
English PDF |
| GB/T 38011-2019 |
Footwear—Test methods for whole shoe—Pull-out force of upper bands 鞋类 整鞋试验方法 帮带拔出力 |
China National Standards force |
English PDF |
| GB/T 37919-2019 |
Identificating and treating rules for law enforcement of electronic commerce products 电子商务产品执法查处取证规则 |
China National Standards force |
English PDF |
| GB/T 37897-2019 |
Fibre-reinforced plastic composites—Determination of the in-plane shear modulus by the plate twist method 纤维增强塑料复合材料 平板扭曲法测定面内剪切模量 |
China National Standards force |
English PDF |
| GB/T 37881-2019 |
Plastics－Long glass fiber reinforced polypropylene（PP） compound for automotive 塑料 汽车用长玻璃纤维增强聚丙烯(PP)专用料 |
China National Standards force |
English PDF |
| GB/T 37799-2019 |
Shaped reinforced concrete pipes 钢筋混凝土异形管 |
China National Standards force |
English PDF |
| GB/T 37776-2019 |
Methods for the calibration of dynamic force transducers—Calibration by shock force 动态力传感器校准方法 冲击力法校准 |
China National Standards force |
English PDF |
| GB/T 15329-2019 |
Rubber hoses and hose assemblies—Textile-reinforced hydraulic types for oil-based or water-based fluids—Specification 橡胶软管及软管组合件 油基或水基流体适用的织物增强液压型 规范 |
China National Standards force |
English PDF |
| GB/T 37622-2019 |
Hot rolled steel bar of fire resistant for the reinforcement of concrete 钢筋混凝土用热轧耐火钢筋 |
China National Standards force |
English PDF |
| GB/T 37616-2019 |
Aluminium alloys extruded profiles-axial force controlled fatigue testing method 铝合金挤压型材轴向力控制疲劳试验方法 |
China National Standards force |
English PDF |
| GB/T 37181-2018 |
Reinforced concrete corrosion control engineering life cycle—General requirements 钢筋混凝土腐蚀控制工程全生命周期-通用要求 |
China National Standards force |
English PDF |
| GB/T 36969-2018 |
Nanotechnology—Method for the measurement of the nanofilm-thickness by atomic force microscopy 纳米技术-原子力显微术测定纳米薄膜厚度的方法 |
China National Standards force |
English PDF |
| GB/T 35096-2018 |
SiC particulate reinforced aluminum matrix composites－Forgings SiC颗粒增强铝基复合材料 锻材 |
China National Standards force |
English PDF |
| GB/T 36140-2018 |
Technical requirements for assembled insulation combination wall composite by glass fiber reinforced inorganic materials 装配式玻纤增强无机材料复合保温墙体技术要求 |
China National Standards force |
English PDF |
| GB/T 36262-2018 |
Fiber reinforced polymer composite grids for civil engineering 结构工程用纤维增强复合材料网格 |
China National Standards force |
English PDF |
| GB/T 23641-2018 |
Fiber reinforced unsaturated polyester moulding compounds（SMC and BMC）for electrical purposes 电气用纤维增强不饱和聚酯模塑料（SMC/BMC） |
China National Standards force |
English PDF |
| GB/T 16825.2-2018 |
Verification of static uniaxial testing machines—Part 2: Tension creep testing machines—Verification of the applied force 静力单轴试验机的检验 第2部分：拉力蠕变试验机 施加力的检验 |
China National Standards force |
English PDF |
| GB/T 36412-2018 |
Verification and calibration of force standard machines 力标准机的检验与校准 |
China National Standards force |
English PDF |
| GB/T 36532-2018 |
Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics 纤维增强塑料 热固性模塑料和预浸料 固化特性测定 |
China National Standards force |
English PDF |
| GB/T 36707-2018 |
Hot rolled carbon steel and stainless steel clad bars for the reinforcement of concrete 钢筋混凝土用热轧碳素钢-不锈钢复合钢筋 |
China National Standards force |
English PDF |
| GB/T 36747-2018 |
Design specification for conservation and reinforcement of earthen site in arid environment 干燥环境土遗址保护加固设计规范 |
China National Standards force |
English PDF |
| GB/T 35843-2018 |
Test method of fiber content of fiber reinforced concrete and its product 纤维增强混凝土及其制品的纤维含量试验方法 |
China National Standards force |
English PDF |
| GB/T 35982-2018 |
Mechanical vibration and shock—Coupling forces at the man-machine interface for hand-transmitted vibration 机械振动与冲击 手传振动人机界面的耦合力 |
China National Standards force |
English PDF |
| GB/T 1499.2-2018 |
Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars 钢筋混凝土用钢 第2部分：热轧带肋钢筋 |
China National Standards force |
English PDF |
| GB/T 36010-2018 |
Platinum-40%rhodium/platinum-20%rhodium thermocomouple wires and temperature-electromotive force(EMF) tables 铂铑40-铂铑20热电偶丝及分度表 |
China National Standards force |
English PDF |
| GB/T 17737.316-2018 |
Coaxial communication cables—Part 1-316:echanical test methods—Test for maximum pulling force of cable 同轴通信电缆 第1-316部分：机械试验方法 电缆的最大抗拉力试验 |
China National Standards force |
English PDF |
| GB/T 34888-2017 |
Rotary shaft lip-type seals—Determination of installing and removing forces 旋转轴唇形密封圈 装拆力的测定 |
China National Standards force |
English PDF |
| GB/T 34336-2017 |
Reinforced nanoporous aerogel products for thermal insulation 纳米孔气凝胶复合绝热制品 |
China National Standards force |
English PDF |
| GB/T 16752-2017 |
Test methods of concrete and reinforced concrete sewer pipes 混凝土和钢筋混凝土排水管试验方法 |
China National Standards force |
English PDF |
| GB/T 34551-2017 |
Test method for alkali resistance of glass fiber reinforced polymer bars in high temperature condition 玻璃纤维增强复合材料筋高温耐碱性试验方法 |
China National Standards force |
English PDF |
| GB/T 34329-2017 |
General requirements of fiber reinforced plastics pressure vessel 纤维增强塑料压力容器通用要求 |
China National Standards force |
English PDF |
| GB/T 34592-2017 |
Steering force steering angle detector for steering wheel of automobile 汽车转向盘转向力-转向角检测仪 |
China National Standards force |
English PDF |
| GB/T 3854-2017 |
Test method for hardness of reinforced plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 |
China National Standards force |
English PDF |
| GB/T 34206-2017 |
High corrosion resistance alloy rebars for the reinforcement of marine concrete 海洋工程混凝土用高耐蚀性合金带肋钢筋 |
China National Standards force |
English PDF |
| GB/T 33953-2017 |
Corrosion resistance bars for the reinforcement of concrete 钢筋混凝土用耐蚀钢筋 |
China National Standards force |
English PDF |
| GB/T 33959-2017 |
Stainless steel bars for the reinforcement of concrete 钢筋混凝土用不锈钢钢筋 |
China National Standards force |
English PDF |
| GB/T 33803-2017 |
Technical specification for application of reinforced concrete anti-corrosion inhibitor 钢筋混凝土阻锈剂耐蚀应用技术规范 |
China National Standards force |
English PDF |
| GB/T 33714-2017 |
Nanotechnology—Test method for size of nanoparticles—Atomic force microscopy 纳米技术 纳米颗粒尺寸测量 原子力显微术 |
China National Standards force |
English PDF |
| GB/T 3857-2017 |
Test method for chemical resistance of glass fiber reinforced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 |
China National Standards force |
English PDF |
| GB/T 35185-2017 |
Composite reinforced line pipe for the petroleum and natural gas industry 石油天然气工业用复合材料增强管线钢管 |
China National Standards force |
English PDF |
| GB/T 35156-2017 |
Fiber reinforced polymer composites structural cables 结构用纤维增强复合材料拉索 |
China National Standards force |
English PDF |
| GB/T 35544-2017 |
Fully-wrapped carbon fiber reinforced cylinders with an aluminum liner for the on-board storage of compressed hydrogen as a fuel for land vehicles 车用压缩氢气铝内胆碳纤维全缠绕气瓶 |
China National Standards force |
English PDF |
| GB/T 1499.1-2017 |
Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars 钢筋混凝土用钢 第1部分：热轧光圆钢筋 |
China National Standards force |
English PDF |
| GB/T 11182-2017 |
Steel wire for rubber hose reinforcement 橡胶软管增强用钢丝 |
China National Standards force |
English PDF |
| GB/T 22082-2017 |
Reinforced concrete segments 预制混凝土衬砌管片 |
China National Standards force |
English PDF |
| GB/T 33365-2016 |
Weld steel fabric for the reinforcement of concrete—Test methods 钢筋混凝土用钢筋焊接网 试验方法 |
China National Standards force |
English PDF |
| GB/T 33383-2016 |
Technical specification for anti-corrosion on concrete/reinforced concrete structures using corrosion-resistant modified polyvinyl chloride (HFVC) structural adhesive and cement 耐蚀改性聚氯乙烯（HFVC）结构胶及胶泥防腐技术规范 |
China National Standards force |
English PDF |
| GB/T 33240-2016 |
Zinc-aluminum alloy-epoxy duplex coated steel bars for the reinforcement of concrete 钢筋混凝土用镀锌铝合金-环氧树脂复合涂层钢筋 |
China National Standards force |
English PDF |
| GB/T 1186-2016 |
Rubber hoses,textile-reinforced,for compressed air－Specification 压缩空气用织物增强橡胶软管 规范 |
China National Standards force |
English PDF |
| GB/T 33010-2016 |
Verification of force transducers 力传感器的检验 |
China National Standards force |
English PDF |
| GB/T 32968-2016 |
Zinc-aluminum alloy coated steel bars for the reinforcement of concrete 钢筋混凝土用锌铝合金镀层钢筋 |
China National Standards force |
English PDF |
| GB/T 21238-2016 |
Glass fiber reinforced plastics mortar pipes 玻璃纤维增强塑料夹砂管 |
China National Standards force |
English PDF |
| GB/T 32710.10-2016 |
Safety requirements for environmental testing and conditioning equipment—Part 10: Electric gravity convection ovens and forced ventilation ovens 环境试验仪器及设备安全规范 第10部分：电热干燥箱及电热鼓风干燥箱 |
China National Standards force |
English PDF |
| GB/T 32599-2016 |
Test method for removal force of attached components on textile products 纺织制品附件脱落强力试验方法 |
China National Standards force |
English PDF |
| GB/T 32497-2016 |
Test method of ballistic resistance against fragment simulating projectiles for fiber-reinforced composites—V50 method 纤维增强复合材料抗破片模拟弹性能试验方法 V50法 |
China National Standards force |
English PDF |
| GB/T 32496-2016 |
Test method for volume fraction of reinforcement in metal matrix composites—Image analysis method 金属基复合材料增强体体积含量试验方法 图像分析法 |
China National Standards force |
English PDF |
| GB/T 32493-2016 |
Test method of ballistic resistance for fibre reinforced composites—Specific absorbed energy by perforation method 纤维增强复合材料抗弹性能试验方法 贯穿比吸能法 |
China National Standards force |
English PDF |
| GB/T 32491-2016 |
Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings 玻璃纤维增强热固性树脂管及管件长期静水压试验方法 |
China National Standards force |
English PDF |
| Find out:442Items | To Page of: First -Previous-Next -Last | 1 2 3 |
