Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 21617-2023 |
Dangerous Goods Solid Oxidizing Test Methods {译} 危险品 固体氧化性试验方法 |
China National Standards lid |
 English PDF |
| GB/T 18329.2-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 2: Destructive testing of bonding strength for alloys with thickness ≥ 2 mm {译} 滑动轴承 多层金属滑动轴承 第2部分：合金厚度≥2mm的结合强度破坏性试验 |
China National Standards lid |
English PDF |
| GB/T 18329.1-2023 |
Sliding bearings Multi-layer metal sliding bearings Part 1: Ultrasonic non-destructive testing of bond quality for alloys with thickness ≥0.5mm {译} 滑动轴承 多层金属滑动轴承 第1部分：合金厚度≥0.5mm的结合质量超声无损检验 |
China National Standards lid |
English PDF |
| GB/T 14910-2023 |
Sliding bearings Technical requirements for thick-walled multi-layer bearing backings {译} 滑动轴承 厚壁多层轴承衬背技术要求 |
China National Standards lid |
English PDF |
| GB/T 43361-2023 |
Gas Analysis Validation of Hydrogen Fuel Analysis Methods for Proton Exchange Membrane Fuel Cells for Road Vehicles {译} 气体分析 道路车辆用质子交换膜燃料电池氢燃料分析方法的确认 |
China National Standards lid |
English PDF |
| GB 31604.59-2023 |
National Food Safety Standards Food Contact Materials and Products General Principles for Validation of Chemical Analysis Methods {译} 食品安全国家标准 食品接触材料及制品 化学分析方法验证通则 |
China National Standards lid |
English PDF |
| GB 5009.295-2023 |
National Food Safety Standard General Principles for Validation of Chemical Analysis Methods {译} 食品安全国家标准 化学分析方法验证通则 |
China National Standards lid |
English PDF |
| GB 31604.53-2022 |
National Food Safety Standard Food Contact Materials and Products Determination of Migration Amount of 5-Ethylidene-2-Norbornene {译} 食品安全国家标准 食品接触材料及制品 5-亚乙基-2-降冰片烯迁移量的测定 |
China National Standards lid |
English PDF |
| GB 31660.1-2019 |
National food safety standards Determination of macrolide drug residues in aquatic products Liquid chromatography-tandem mass spectrometry {译} 食品安全国家标准 水产品中大环内酯类药物残留量的测定 液相色谱-串联质谱法 |
China National Standards lid |
English PDF |
| GB 18279-2023 |
Sterilization of healthcare products Ethylene oxide Requirements for the development, validation and routine control of medical device sterilization processes {译} 医疗保健产品灭菌 环氧乙烷 医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards lid |
English PDF |
| GB/T 43220-2023 |
Method for determination of arsenic in solid biomass fuels {译} 固体生物质燃料中砷的测定方法 |
China National Standards lid |
English PDF |
| GB/T 43139-2023 |
Density testing of cast aluminum alloy liquid reduced pressure solidification samples {译} 铸造铝合金液减压凝固试样密度检测 |
China National Standards lid |
English PDF |
| GB/T 21951-2023 |
Inlaid or solid cubic boron nitride insert styles and sizes {译} 镶或整体立方氮化硼刀片 型式和尺寸 |
China National Standards lid |
English PDF |
| GB/T 6730.86-2023 |
Iron ore Determination of radionuclides Inductively coupled plasma mass spectrometry {译} 铁矿石 放射性核素的测定 电感耦合等离子体质谱法 |
China National Standards lid |
English PDF |
| GB/T 42913-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids {译} 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 |
China National Standards lid |
English PDF |
| GB/T 10671-2023 |
Test method for specific optical density of smoke produced by solid materials {译} 固体材料产烟的比光密度试验方法 |
China National Standards lid |
English PDF |
| GB/T 42649-2023 |
Space data and information transmission system Licklider Transfer Protocol (LTP) {译} 空间数据与信息传输系统 利克莱德传输协议（LTP） |
China National Standards lid |
English PDF |
| GB/Z 42540-2023 |
Technical Guidelines for Containment of Pharmaceutical Equipment Solid Preparations {译} 制药装备密闭性技术指南 固体制剂 |
China National Standards lid |
English PDF |
| GB/T 8152.11-2023 |
Methods for chemical analysis of lead concentrates - Part 11: Determination of mercury content - Atomic fluorescence spectrometry and solid injection direct method {译} 铅精矿化学分析方法 第11部分：汞含量的测定 原子荧光光谱法和固体进样直接法 |
China National Standards lid |
English PDF |
| GB/T 42741-2023 |
Method for measuring electromagnetic parameters of solid materials using the free-space method {译} 固体材料使用自由空间法的电磁参数测量方法 |
China National Standards lid |
English PDF |
| GB/T 42614-2023 |
Sliding bearings - Determination of the limit value of σ0.01* for metal flangeless thin-walled bearing shells {译} 滑动轴承 金属无法兰薄壁轴瓦 σ0.01*极限值的测定 |
China National Standards lid |
English PDF |
| GB/Z 42344-2023 |
Guidelines for Validation of Pharmaceutical Machinery (Equipment) Computerized System {译} 制药机械（设备）计算机化系统验证指南 |
China National Standards lid |
English PDF |
| GB/T 13277.8-2023 |
Compressed air - Part 8: Methods of measurement of mass concentration of solid particles {译} 压缩空气 第8部分：固体颗粒质量浓度测量方法 |
China National Standards lid |
English PDF |
| GB/T 21144-2023 |
concrete solid brick {译} 混凝土实心砖 |
China National Standards lid |
English PDF |
| GB 6675.11-2014 |
Toy Safety Part 11: Household Swings, Slides and Similar Indoor and Outdoor Activity Toys "No. 1 Amendment" {译} 玩具安全 第11部分：家用秋千、滑梯及类似用途室内、室外活动玩具《第1号修改单》 |
China National Standards lid |
English PDF |
| GB/T 20822-2007 |
Solid-liquid method liquor "No. 1 Amendment" {译} 固液法白酒《第1号修改单》 |
China National Standards lid |
English PDF |
| GB/T 4207-2022 |
Method for determination of tracking resistance index and relative tracking index of solid insulating materials {译} 固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法 |
China National Standards lid |
English PDF |
| GB/T 27029-2022 |
General principles and requirements for conformity assessment, validation and verification institutions {译} 合格评定 审定与核查机构通用原则和要求 |
China National Standards lid |
English PDF |
| GB/T 41295.3-2022 |
Functional Safety Application Guide Part 3: Test Validation {译} 功能安全应用指南 第3部分：测试验证 |
China National Standards lid |
English PDF |
| GB/Z 42217-2022 |
Medical devices for the validation of medical device quality system software {译} 医疗器械 用于医疗器械质量体系软件的确认 |
China National Standards lid |
English PDF |
| GB/T 16145-2022 |
Gamma Spectroscopy Analysis Method of Radionuclides in Environmental and Biological Samples {译} 环境及生物样品中放射性核素的γ能谱分析方法 |
China National Standards lid |
English PDF |
| GB/T 42170-2022 |
Footwear - Test methods for hollow and solid heels with heels - Heel adhesion {译} 鞋类 带跟面的空心和实心鞋跟试验方法 跟面结合力 |
China National Standards lid |
English PDF |
| GB/T 42255-2022 |
General specification for stainless steel solid rivets for aerospace {译} 航空航天用不锈钢实心铆钉通用规范 |
China National Standards lid |
English PDF |
| GB/T 41876-2022 |
Technical specification for bonded solid tires {译} 粘结式实心轮胎技术规范 |
China National Standards lid |
English PDF |
| GB/T 16623-2022 |
Technical specifications for press-fit solid tires {译} 压配式实心轮胎技术规范 |
China National Standards lid |
English PDF |
| GB/T 10824-2022 |
Pneumatic tire rim solid tire technical specification {译} 充气轮胎轮辋实心轮胎技术规范 |
China National Standards lid |
English PDF |
| GB/T 38265.6-2022 |
Test methods for soldering fluxes - Part 6: Determination of halide (excluding fluoride) content {译} 软钎剂试验方法 第6部分：卤化物（不包括氟化物）含量的测定 |
China National Standards lid |
English PDF |
| GB/T 41695-2022 |
Safety and Resilience Emergency Management Guidelines for Implementation of Community Early Warning Systems for Landslide Hazards {译} 安全与韧性 应急管理 滑坡灾害社区预警体系实施指南 |
China National Standards lid |
English PDF |
| GB/T 16622-2022 |
Press-fit solid tire specifications, dimensions and loads {译} 压配式实心轮胎规格、尺寸与负荷 |
China National Standards lid |
English PDF |
| GB/Z 27426-2022 |
Guidelines for monitoring the validity of chemical analysis laboratory results {译} 化学分析实验室结果有效性监控指南 |
China National Standards lid |
English PDF |
| GB/T 42059-2022 |
Test methods for underwater glider systems {译} 水下滑翔器系统试验方法 |
China National Standards lid |
English PDF |
| GB 40558-2021 |
The safety requirements for marine shipping solid bulk cargoes 固体散装货物海运安全技术要求 |
China National Standards lid |
English PDF |
| GB 19268-2021 |
Solid cyanide package 固体氰化物包装 |
China National Standards lid |
English PDF |
| GB/T 40456-2021 |
Detection and identification of Vryburgia amaryllidis (Bouché, 1837) 石蒜弗粉蚧检疫鉴定方法 |
China National Standards lid |
English PDF |
| GB/T 40426.3-2021 |
Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material 塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材 |
China National Standards lid |
English PDF |
| GB/T 40426.2-2021 |
Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material 塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材 |
China National Standards lid |
English PDF |
| GB/T 40426.1-2021 |
Plastics—Decorative solid surfacing materials—Part 1: Classification and specifications 塑料制品 装饰性实体面材 第1部分：分类和规范 |
China National Standards lid |
English PDF |
| GB/T 40283.3-2021 |
Automation systems and integration—Interoperability of capability units for manufacturing application solutions—Part 3:Verification and validation of interoperability among capability units 自动化系统与集成 制造应用解决方案的能力单元互操作 第3部分：能力单元互操作性的验证和确认 |
China National Standards lid |
English PDF |
| GB 40558-2021 |
The safety requirements for marine shipping solid bulk cargoes 固体散装货物海运安全技术要求 |
China National Standards lid |
English PDF |
| GB/T 40244-2021 |
Chemicals - Liquid or solid identification - Fluidity test method 化学品 固液鉴别 流动性测定法 |
China National Standards lid |
English PDF |
| GB/T 31838.7-2021 |
Solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated temperatures 固体绝缘材料 介电和电阻特性 第7部分：电阻特性(DC方法) 高温下测量体积电阻和体积电阻率 |
China National Standards lid |
English PDF |
| GB/T 31838.6-2021 |
Solid insulating materials—Dielectric and resistive properties—Part 6:Dielectric properties(AC method)—Relative permittivity and dielectric dissipation factor(frequencies 0.1Hz～10 MHz) 固体绝缘材料 介电和电阻特性 第6部分：介电特性（AC方法） 相对介电常数和介质损耗因数（频率0.1Hz~10MHz） |
China National Standards lid |
English PDF |
| GB/T 31838.5-2021 |
Solid insulating materials - Dielectric and resistive properties - Part 5: Resistive properties(DC method) - Volume resistance and volume resistivity of impregnation and coating materials 固体绝缘材料 介电和电阻特性 第5部分：电阻特性(DC方法) 浸渍和涂层材料的体积电阻和体积电阻率 |
China National Standards lid |
English PDF |
| GB/T 17934.8-2021 |
Graphic technology—Process control for the production of half-tone colour separations, proof and production prints—Part 8:Validation print processes working directly from digital data 印刷技术 网目调分色版、样张和生产印刷品的加工过程控制 第8部分：直接使用数字数据的验证印刷品制作过程 |
China National Standards lid |
English PDF |
| GB 19268-2021 |
Solid cyanide package 固体氰化物包装 |
China National Standards lid |
English PDF |
| GB/T 40039-2021 |
Validation of soil moisture remote sensing products 土壤水分遥感产品真实性检验 |
China National Standards lid |
English PDF |
| GB/T 40038-2021 |
Validation of vegetation index remote sensing products 植被指数遥感产品真实性检验 |
China National Standards lid |
English PDF |
| GB/T 40034-2021 |
Validation of leaf area index remote sensing products 叶面积指数遥感产品真实性检验 |
China National Standards lid |
English PDF |
| GB/T 40033-2021 |
Validation of land surface evapotranspiration remote sensing products 地表蒸散发遥感产品真实性检验 |
China National Standards lid |
English PDF |
| GB/T 39993-2021 |
Determination of permitted preservatives dimethyl oxazolidine, 7-ethylbicyclooxazolidine and 5-bromo-5-nitro-1,3-dioxane in cosmetics 化妆品中限用防腐剂二甲基噁唑烷、7-乙基双环噁唑烷和5-溴-5-硝基-1,3-二噁烷的测定 |
China National Standards lid |
English PDF |
| GB/T 39742-2021 |
Plain bearings—Aluminium alloys for solid bearings 滑动轴承 单层滑动轴承用铝基铸造合金 |
China National Standards lid |
English PDF |
| GB/T 15579.14-2021 |
Arc welding equipment -- Part 14: Calibration, validation and consistency testing 弧焊设备 第14部分：校准、确认和一致性试验 |
China National Standards lid |
English PDF |
| GB/T 41121-2021 |
Glass water slide device safety technical requirement 玻璃水滑道安全技术要求 |
China National Standards lid |
English PDF |
| GB/T 41112-2021 |
Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys 镁及镁合金焊丝 |
China National Standards lid |
English PDF |
| GB/T 41104.3-2021 |
Solder wire, solid and flux cored -- Specifications and test methods -- Part 3: Wetting balance test method for flux cored solder wire efficacy 实心和药芯软钎料丝? 规范和试验方法? 第3部分：药芯软钎料丝功效的润湿平衡试验方法 |
China National Standards lid |
English PDF |
| GB/T 41104.2-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 2: Determination of flux content 实心和药芯软钎料丝? 规范和试验方法? 第2部分：钎剂含量的测定 |
China National Standards lid |
English PDF |
| GB/T 41104.1-2021 |
Solder wire, solid and flux cored -- Specification and test methods -- Part 1: Classification and performance requirements 实心和药芯软钎料丝? 规范和试验方法? 第1部分：分类和性能要求 |
China National Standards lid |
English PDF |
| GB/T 2449.1-2021 |
Sulphur for industrial use—Part 1: Solid product 工业硫磺 第1部分：固体产品 |
China National Standards lid |
English PDF |
| GB/T 41145-2021 |
Human factors verification and validation for nuclear power plants 核电厂人因验证和确认 |
China National Standards lid |
English PDF |
| GB/T 41015-2021 |
Technical requirements for solid waste vitrification product 固体废物玻璃化处理产物技术要求 |
China National Standards lid |
English PDF |
| GB/T 20882.3-2021 |
Quality requirements for starch sugar—Part 3:Crystalline fructose and solid fructose-glucose 淀粉糖质量要求 第3部分：结晶果糖、固体果葡糖 |
China National Standards lid |
English PDF |
| GB/T 41220-2021 |
Laminated lidding film for food packaging 食品包装用复合塑料盖膜 |
China National Standards lid |
English PDF |
| GB/T 41012-2021 |
Technical specifications for collection and recovery of non-ferrous metal contained solid waste 含有色金属固体废物回收利用技术规范 |
China National Standards lid |
English PDF |
| GB/T 41198-2021 |
Guidelines for validation and verification of forestry carbon projects 林业碳汇项目审定和核证指南 |
China National Standards lid |
English PDF |
| GB/T 40809-2021 |
Casting aluminum alloys—Process specification for semisolid rheo-diecasting forming 铸造铝合金 半固态流变压铸成形工艺规范 |
China National Standards lid |
English PDF |
| GB/T 6346.24-2021 |
Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第24部分：分规范 表面安装导电聚合物固体电解质钽固定电容器 |
China National Standards lid |
English PDF |
| GB/T 8601-2021 |
Forged and rolled solid wheels for railway 铁路用辗钢整体车轮 |
China National Standards lid |
English PDF |
| GB 18599-2020 |
Standard for pollution control on the non-hazardous industrial solid waste storage and landfill 一般工业固体废物贮存和填埋污染控制标准 |
China National Standards lid |
English PDF |
| GB/T 51435-2021 |
Technical standard for rural solid waste collection transportation and treatment 农村生活垃圾收运和处理技术标准 |
China National Standards lid |
English PDF |
| GB/T 51403-2021 |
Technical standard for liner system of municipal solid waste sanitary landfill 生活垃圾卫生填埋场防渗系统工程技术标准 |
China National Standards lid |
English PDF |
| GB 55012-2021 |
Project code for engineering of treatment and disposal of municipal solid wastes 生活垃圾处理处置工程项目规范 |
China National Standards lid |
English PDF |
| GB/T 39197-2020 |
Principle and requirement for material flow data collection of general solid waste 一般固体废物物质流数据采集原则和要求 |
China National Standards lid |
English PDF |
| GB/T 39198-2020 |
Classification and code for general solid waste 一般固体废物分类与代码 |
China National Standards lid |
English PDF |
| GB/T 8151.23-2020 |
Methods for chemical analysis of zinc concentrates—Part 23: Determination of mercury content—Solid sampling and direct mercury analysis method 锌精矿化学分析方法 第23部分：汞含量的测定 固体进样直接法 |
China National Standards lid |
English PDF |
| GB/T 18661-2020 |
Metal-halide lamp(ScI3-NaI series)—Performance requirements 金属卤化物灯（钪钠系列） 性能要求 |
China National Standards lid |
English PDF |
| GB/T 22578.3-2020 |
Electrical insulation system (EIS)—Thermal evaluation of combined liquid and solid components—Part 3:Hermetic motor-compressors 电气绝缘系统(EIS) 液体和固体组件的热评定 第3部分：密封式电动机-压缩机 |
China National Standards lid |
English PDF |
| GB/T 16145-2020 |
Gamma spectrometry method of analysing radionuclides in biological samples 生物样品中放射性核素的γ能谱分析方法 |
China National Standards lid |
English PDF |
| GB/T 38658-2020 |
Guidance for the extension of validity of type tests of AC metal enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV 3.6 kV～40.5 kV交流金属封闭开关设备和控制设备型式试验有效性的延伸导则 |
China National Standards lid |
English PDF |
| GB/T 38509-2020 |
Code for the design of landslide stabilization 滑坡防治设计规范 |
China National Standards lid |
English PDF |
| GB/T 39527-2020 |
Determination of calcium, aluminium and silicon in the solid surface materials—Method of chemical analysis 实体面材产品中钙、铝、硅元素含量的测定 化学分析法 |
China National Standards lid |
English PDF |
| GB/T 39624-2020 |
Technical specification for underwater topographic survey of airborne lidar 机载激光雷达水下地形测量技术规范 |
China National Standards lid |
English PDF |
| GB/T 39468-2020 |
General methods for the validation of terrestrial quantitative remote sensing products 陆地定量遥感产品真实性检验通用方法 |
China National Standards lid |
English PDF |
| GB/T 39431-2020 |
Plain bearings—Bearings containing dispersed solid lubricants 滑动轴承 含有分散固体润滑剂轴承 |
China National Standards lid |
English PDF |
| GB/T 39359-2020 |
Integrating sphere method for the test of liquid/solid suspended photocatalytic hydrogen production reaction 积分球法测量悬浮式液固光催化制氢反应 |
China National Standards lid |
English PDF |
| GB/T 39338-2020 |
Technical requirements of solid-filling in fully-mechanized coal mining 综合机械化固体充填采煤技术要求 |
China National Standards lid |
English PDF |
| GB/T 13089-2020 |
Method for determination of oxazolidinethione in feeds 饲料中噁唑烷硫酮的测定方法 |
China National Standards lid |
English PDF |
| GB/T 20323-2020 |
Milling cutters designation —Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges 铣刀代号 整体或镶齿结构或带可转位切削刃的带柄和带孔铣刀 |
China National Standards lid |
English PDF |
| GB/T 38298-2019 |
Test method of auto-ignition temperature for solid chemicals 固体化学品自动点火温度的试验方法 |
China National Standards lid |
English PDF |
| GB/T 23754-2019 |
Container and lid for lead-acid storage batteries 铅酸蓄电池槽、盖 |
China National Standards lid |
English PDF |
| GB/T 38432-2019 |
Particle—Gas-solid reaction measurement—Micro fluidized bed method 颗粒 气固反应测定 微型流化床法 |
China National Standards lid |
English PDF |
| GB/T 38409-2019 |
Leather—Chemical tests—Determination of N-methyl-2-pyrrolidone（NMP) and N-ethyl-2-pyrrolidone (NEP) content 皮革 化学试验 N-甲基吡咯烷酮（NMP）和N-乙基吡咯烷酮（NEP）的测定 |
China National Standards lid |
English PDF |
| GB/T 38351-2019 |
Specifications for recycling and disposal of solid waste from manufacturing process of rubber shoes and sports footwear 胶鞋、运动鞋制造过程中固体废弃物回收处理规范 |
China National Standards lid |
English PDF |
| GB/T 38349-2019 |
Determination of N-methyl pyrrolidone in rubber shoes and sports footwear 胶鞋 、运动鞋N-甲基吡咯烷酮含量的测定 |
China National Standards lid |
English PDF |
| GB/T 38298-2019 |
Test method of auto-ignition temperature for solid chemicals 固体化学品自动点火温度的试验方法 |
China National Standards lid |
English PDF |
| GB/T 23754-2019 |
Container and lid for lead-acid storage batteries 铅酸蓄电池槽、盖 |
China National Standards lid |
English PDF |
| GB/T 37977.23-2019 |
Electrostatics—Part 2-3：Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation 静电学 第2-3部分：防静电固体平面材料电阻和电阻率的测试方法 |
China National Standards lid |
English PDF |
| GB/T 37872-2019 |
Guidelines for validation of next-generation target region sequencing 目标基因区域捕获质量评价通则 |
China National Standards lid |
English PDF |
| GB/T 37844-2019 |
Space materials science experiment—Preparation specification for solid experiment sample 空间材料科学实验 固体实验样品制备规范 |
China National Standards lid |
English PDF |
| GB/T 37844-2019 |
Space materials science experiment—Preparation specification for solid experiment sample 空间材料科学实验 固体实验样品制备规范 |
China National Standards lid |
English PDF |
| GB/T 2294-2019 |
Determination of softening point in solid products of coal carbonization 焦化固体类产品软化点测定方法 |
China National Standards lid |
English PDF |
| GB/T 37640-2019 |
：Determination of chloroacetaldehyde,2,4-dihydroxy-3-methylbenzaldehyde,crotonaldehyde,acetophenone,2-pentylidenecyclohexanone and glutaral in cosmetics—High performance liquid chromatography 化妆品中氯乙醛、2,4-二羟基-3-甲基苯甲醛、巴豆醛、苯乙酮、2-亚戊基环己酮、戊二醛含量的测定 高效液相色谱法 |
China National Standards lid |
English PDF |
| GB/T 31838.4-2019 |
Solid insulating materials—Dielectric and resistive properties—Part 4: Resistive properties (DC methods)—Insulation resistance 固体绝缘材料 介电和电阻特性 第4部分：电阻特性(DC方法) 绝缘电阻 |
China National Standards lid |
English PDF |
| GB/T 31838.3-2019 |
Solid insulating materials—Dielectric and resistive properties—Part 3: Resistive properties (DC methods)—Surface resistance and surface resistivity 固体绝缘材料 介电和电阻特性 第3部分：电阻特性(DC方法) 表面电阻和表面电阻率 |
China National Standards lid |
English PDF |
| GB/T 31838.2-2019 |
Solid insulating materials—Dielectric and resistive properties—Part 2: Resistive properties (DC methods)—Volume resistance and volume resistivity 固体绝缘材料 介电和电阻特性 第2部分：电阻特性(DC方法) 体积电阻和体积电阻率 |
China National Standards lid |
English PDF |
| GB/T 37517-2019 |
Animal and vegetable fats and oils—Determination of solid fat content by pulsed NMR—Indirect method 动植物油脂 脉冲核磁共振法测定固体脂肪含量 间接法 |
China National Standards lid |
English PDF |
| GB/T 17030-2019 |
Polyvinylidene chloride(PVDC)flat-film for food-packaging 食品包装用聚偏二氯乙烯（PVDC）片状肠衣膜 |
China National Standards lid |
English PDF |
| GB/T 510-2018 |
Determination of solidification point for petroleum products 石油产品凝点测定法 |
China National Standards lid |
English PDF |
| GB/T 37171-2018 |
Specification and test methods for bronze plate containing diamond-shaped solid lubricant 含有菱形固体润滑剂的青铜板材技术要求和检验方法 |
China National Standards lid |
English PDF |
| GB/T 25121.2-2018 |
Railway applications—Rolling stock equipment—Capacitors for power electronics—Part 2: Aluminium electrolytic capacitors with non-solid electrolyte 轨道交通-机车车辆设备-电力电子电容器-第2部分：非固体电解质铝电解电容器 |
China National Standards lid |
English PDF |
| GB/T 36938-2018 |
Textile machinery and accessories—Strips for water jet solidification 纺织机械与附件-水刺机用水射流板 |
China National Standards lid |
English PDF |
| GB 12711-2018 |
Standard of safety for low and intermediate level solid radioactive waste packages 低、中水平放射性固体废物包安全标准 |
China National Standards lid |
English PDF |
| GB 36900.1-2018 |
Ductile Cast Iron High Integrity Container for Low-and-Intermediate Level Radioactive Solid Wastes 低、中水平放射性废物高完整性容器-球墨铸铁容器 |
China National Standards lid |
English PDF |
| GB 36900.3-2018 |
Cross Linked High Density Polyethene High Integrity Container for Low-and-intermediate level radioactive solid wastes 低、中水平放射性废物高完整性容器-交联高密度聚乙烯容器 |
China National Standards lid |
English PDF |
| GB 36900.2-2018 |
Concrete High Integrity Container for Low-and-Intermediate Level—Radioactive Solid Wastes 低、中水平放射性废物高完整性容器-混凝土容器 |
China National Standards lid |
English PDF |
| GB 9132-2018 |
Safety regulations for near-surface disposal of low- and medium-level radioactive solid wastes 低、中水平放射性固体废物近地表处置安全规定 |
China National Standards lid |
English PDF |
| GB 23200.109-2018 |
National Food Safety Standard - Determination of clopyralid residues in plant-derived foods - Liquid chromatography-mass spectrometry 食品安全国家标准-植物源性食品中二氯吡啶酸残留量的测定-液相色谱-质谱联用法 |
China National Standards lid |
English PDF |
| GB/T 19974-2018 |
Sterilization of health care products—General requirement for characterization of a sterilization agent and the development,validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌过程的开发、确认和常规控制的通用要求 |
China National Standards lid |
English PDF |
| GB/T 35017-2018 |
Continuous handing equipment - Bulk Solids Chassification, Symbol, Performance and Test methods 连续搬运设备 散状物料分类、符号、性能及测试方法 |
China National Standards lid |
English PDF |
| GB/T 6346.26-2018 |
Fixed capacitors for use in electronic equipment—Part 26: Sectional specification—Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第26部分：分规范 导电高分子固体电解质铝固定电容器 |
China National Standards lid |
English PDF |
| GB/T 36296-2018 |
Guide for the validation of remote sensing products 遥感产品真实性检验导则 |
China National Standards lid |
English PDF |
| GB/T 11313.38-2018 |
Radio-frequency connectors—Part 38: Sectional specification for 50 Ω model,slide-in radio frequency coaxial connectors (type TMA) for rack and panel applications 射频连接器 第38部分: 50Ω背板和面板用模块滑入式射频连接器(TMA型)分规范 |
China National Standards lid |
English PDF |
| GB/T 36512-2018 |
General requirements for solid-state remote power controllers of aircraft 飞机固态远程功率控制器通用要求 |
China National Standards lid |
English PDF |
| GB/T 36509-2018 |
Requirements and testing methods of structure strength for paraglider 滑翔伞结构强度要求及测试方法 |
China National Standards lid |
English PDF |
| GB/T 6346.2601-2018 |
Fixed capacitors for use in electronic equipment—Part 26-1:Blank detail specification—Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte—Assessment level EZ 电子设备用固定电容器 第26-1部分：空白详细规范 导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards lid |
English PDF |
| GB/T 36355-2018 |
Information technology—Test method of solid state disk 信息技术 固态盘测试方法 |
China National Standards lid |
English PDF |
| GB/T 3884.20-2018 |
Methods for chemical analysis of copper concentrates—Part 20:Determination of mercury content—Solid sampling and direct mercury analysis method 铜精矿化学分析方法 第20部分：汞量的测定 固体进样直接法 |
China National Standards lid |
English PDF |
| GB/T 36640-2018 |
Solid-state relay 固体继电器 |
China National Standards lid |
English PDF |
| GB/T 15036.1-2018 |
Solid wood flooring—Part 1:Technical requirements 实木地板 第1部分：技术要求 |
China National Standards lid |
English PDF |
| GB/T 15036.2-2018 |
Solid wood flooring—Part 2:Examination methods 实木地板 第2部分：检验方法 |
China National Standards lid |
English PDF |
| GB/T 35984-2018 |
Determination of total carbon, combustible carbon and carbonate carbon in solid residues from coal and coke 煤和焦炭的固体残余物中全碳、可燃碳和碳酸盐碳的测定方法 |
China National Standards lid |
English PDF |
| GB/T 35951-2018 |
Determination of eight macrolide antibiotics such as spiramycin in cosmetics—LC-MS/MS 化妆品中螺旋霉素等8种大环内酯类抗生素的测定 液相色谱-串联质谱法 |
China National Standards lid |
English PDF |
| GB/T 16140-2018 |
Determination of radionuclides in water by gamma spectrometry 水中放射性核素的γ能谱分析方法 |
China National Standards lid |
English PDF |
| GB/T 35924-2018 |
Determination of moisture in solid chemical products－Thermogravimetry method 固体化工产品中水分含量的测定 热重法 |
China National Standards lid |
English PDF |
| GB/T 19973.2-2018 |
Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition，validation and maintenance of a sterilization process 医疗器械的灭菌 微生物学方法 第2部分：用于灭菌过程的定义、确认和维护的无菌试验 |
China National Standards lid |
English PDF |
| GB/T 12470-2018 |
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels 埋弧焊用热强钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards lid |
English PDF |
| GB/T 36034-2018 |
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of high strength steels 埋弧焊用高强钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards lid |
English PDF |
| GB/T 17854-2018 |
Solid wire electrodes /flux combinations for submerged arc welding of stainless steels 埋弧焊用不锈钢焊丝-焊剂组合分类要求 |
China National Standards lid |
English PDF |
| GB/T 18798.2-2018 |
Instant tea in solid form—Part 2: Determination of total ash 固态速溶茶 第2部分：总灰分测定 |
China National Standards lid |
English PDF |
| GB/T 5293-2018 |
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels 埋弧焊用非合金钢及细晶粒钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards lid |
English PDF |
| GB/T 35812-2018 |
Method for analysis of forestry biomass—Determination of insoluble solids following pretreatment 林业生物质原料分析方法 预处理后不溶固体含量测定 |
China National Standards lid |
English PDF |
| GB/T 35905-2018 |
Test methods for biomass—Determination of total solids in biomass 林业生物质原料分析方法 总固体含量测定 |
China National Standards lid |
English PDF |
| GB/T 35913-2018 |
Technical requirements of solid wood flooring for ground with heating system 地采暖用实木地板技术要求 |
China National Standards lid |
English PDF |
| GB/T 6346.2501-2018 |
Fixed capacitors for use in electronic equipment—Part 25:Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25-1部分：空白详细规范 表面安装导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards lid |
English PDF |
| GB/T 36100-2018 |
Indices and computation method of quality assessment for airborne lidAR point cloud data 机载激光雷达点云数据质量评价指标及计算方法 |
China National Standards lid |
English PDF |
| GB/T 6346.25-2018 |
Fixed capacitors for use in electronic equipment—Part 25: Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第25部分：分规范 表面安装导电高分子固体电解质铝固定电容器 |
China National Standards lid |
English PDF |
| GB/T 36135-2018 |
General technical specification for mobile horizontal municipal solid waste compactor 移动水平式生活垃圾压缩机通用技术条件 |
China National Standards lid |
English PDF |
| GB/T 34911-2017 |
Terminology on comprehensive utilization of industrial solid wastes 工业固体废物综合利用术语 |
China National Standards lid |
English PDF |
| GB/T 34939.1-2017 |
D.C.±800kV composite post insulator—Part 1: Composite post insulator with resin impregnated glass fibers solid core ±800kV直流支柱复合绝缘子 第1部分：环氧玻璃纤维实心芯体复合绝缘子 |
China National Standards lid |
English PDF |
| GB/T 18798.1-2017 |
Instant tea in solid form—Part 1: Sampling 固态速溶茶 第1部分：取样 |
China National Standards lid |
English PDF |
| GB/T 34743-2017 |
Oak solid wood flooring 栎木实木地板 |
China National Standards lid |
English PDF |
| GB/T 34713-2017 |
Chemicals—Validation process and principles of alternative methods for in vitro toxicological testing 化学品 体外毒性试验替代方法的验证程序和原则 |
China National Standards lid |
English PDF |
| GB/T 24333-2017 |
Metal halide lamps (NaI-TlI-InI3 series)—Performance requirements 金属卤化物灯（钠铊铟系列） 性能要求 |
China National Standards lid |
English PDF |
| GB/T 24458-2017 |
Ceramic metal halide lamps—Performance specification 陶瓷金属卤化物灯 性能要求 |
China National Standards lid |
English PDF |
| GB/T 34552-2017 |
Municipal solid waste fluidized bed incineration boiler 生活垃圾流化床焚烧锅炉 |
China National Standards lid |
English PDF |
| GB/T 18772-2017 |
Technical requirement for environmental monitory on municipal solid waste sanitary landfill 生活垃圾卫生填埋场环境监测技术要求 |
China National Standards lid |
English PDF |
| GB/T 34389-2017 |
Stamping dies—Sliding plates 冲模 导滑板 |
China National Standards lid |
English PDF |
| GB/T 34582-2017 |
Single cell and stack performance test methods for solid oxide fuel cells (SOFC) 固体氧化物燃料电池单电池和电池堆性能试验方法 |
China National Standards lid |
English PDF |
| GB/T 19587-2017 |
Determination of the specific surface area of solids by gas adsorption using the BET method 气体吸附BET法测定固态物质比表面积 |
China National Standards lid |
English PDF |
| GB/T 27417-2017 |
Conformity assessment—Guidance on validation and verification of chemical analytical methods 合格评定 化学分析方法确认和验证指南 |
China National Standards lid |
English PDF |
| GB/T 33964-2017 |
Wire rods for welding solid electrodes of atmospheric corrosion resisting steels 耐候钢实心焊丝用钢盘条 |
China National Standards lid |
English PDF |
| GB/T 33907-2017 |
Electrolytic solid moisture meter 电解法固体水分测量仪 |
China National Standards lid |
English PDF |
| GB/T 33797-2017 |
Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas 塑料 在高固体份堆肥条件下最终厌氧生物分解能力的测定 采用分析测定释放生物气体的方法 |
China National Standards lid |
English PDF |
| GB/T 33752-2017 |
Aldehyde slide for microarrays 微阵列芯片用醛基基片 |
China National Standards lid |
English PDF |
| GB/T 33584.5-2017 |
Seawater quality requirements and analysis methods for seawater cooling system—Part 5: Determination of dissolved solid 海水冷却水质要求及分析检测方法 第5部分：溶解固形物的测定 |
China National Standards lid |
English PDF |
| GB/T 33070-2016 |
1-Vinyl-2-pyrrolidinone homopolymer for industrial use 工业用聚N-乙烯基吡咯烷酮 |
China National Standards lid |
English PDF |
| GB 51220-2017 |
Technical code for municipal solid waste sanitary landfill closure 生活垃圾卫生填埋场封场技术规范 |
China National Standards lid |
English PDF |
| GB/T 22578.1-2017 |
Electrical insulation systems (EIS)—Thermal evaluaion of combined liquid and solid components—Part 1: General requiremnts 电气绝缘系统（EIS） 液体和固体组件的热评定 第1部分：通用要求 |
China National Standards lid |
English PDF |
| GB/T 35679-2017 |
Measuring method for electromagnetic parameters of solid materials at microwave frequencies using waveguide 固体材料微波频段使用波导装置的电磁参数测量方法 |
China National Standards lid |
English PDF |
| GB/T 22391-2017 |
Test method of endurance for solid tyres—Drum method 实心轮胎耐久性能试验方法 转鼓法 |
China National Standards lid |
English PDF |
| GB/T 8298-2017 |
Latex,rubber—Determination of total solids content 胶乳 总固体含量的测定 |
China National Standards lid |
English PDF |
| GB/T 35657-2017 |
Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion 化学分析方法验证确认和内部质量控制实施指南 基于样品消解的金属组分分析 |
China National Standards lid |
English PDF |
| GB/T 35655-2017 |
Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography 化学分析方法验证确认和内部质量控制实施指南 色谱分析 |
China National Standards lid |
English PDF |
| GB/T 22578.2-2017 |
Electrical insulation system(EIS)—Thermal evaluation of combined liquid and solid components—Part 2: Simplified test 电气绝缘系统(EIS) 液体和固体组件的热评定 第2部分：简化试验 |
China National Standards lid |
English PDF |
| GB/T 35656-2017 |
Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports 化学分析方法验证确认和内部质量控制实施指南 报告定性结果的方法 |
China National Standards lid |
English PDF |
| GB 16487.3-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Wood and wood articles wastes 进口可用作原料的固体废物环境保护控制标准—木、木制品废料 |
China National Standards lid |
English PDF |
| GB 16487.10-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Metal and electrical appliance scraps 进口可用作原料的固体废物环境保护控制标准—废五金电器 |
China National Standards lid |
English PDF |
| GB 16487.11-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Vessels and other floating structures for breaking up 进口可用作原料的固体废物环境保护控制标准—供拆卸的船舶及其他浮动结构体 |
China National Standards lid |
English PDF |
| GB 16487.13-2017 |
Environmental protection control standard for imported solid wastes as raw materials—compressed piece of scrap automobile 进口可用作原料的固体废物环境保护控制标准—废汽车压件 |
China National Standards lid |
English PDF |
| GB 16487.2-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Smelt slag 进口可用作原料的固体废物环境保护控制标准—冶炼渣 |
China National Standards lid |
English PDF |
| GB 16487.6-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of iron and steel 进口可用作原料的固体废物环境保护控制标准—废钢铁 |
China National Standards lid |
English PDF |
| GB 16487.7-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Nonferrous metal scraps 进口可用作原料的固体废物环境保护控制标准—废有色金属 |
China National Standards lid |
English PDF |
| GB 16487.9-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste wires and cables 进口可用作原料的固体废物环境保护控制标准—废电线电缆 |
China National Standards lid |
English PDF |
| GB 16487.12-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of plastics 进口可用作原料的固体废物环境保护控制标准—废塑料 |
China National Standards lid |
English PDF |
| GB 16487.4-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of paper or paperboard 进口可用作原料的固体废物环境保护控制标准—废纸或纸板 |
China National Standards lid |
English PDF |
| GB 16487.8-2017 |
Environmental protection control standard for imported solid wastes as raw materials—Waste electric motors 进口可用作原料的固体废物环境保护控制标准—废电机 |
China National Standards lid |
English PDF |
| GB 34330-2017 |
Identification standards for solid wastes General rules 固体废物鉴别标准—通则 |
China National Standards lid |
English PDF |
| GB/T 33444-2016 |
Specification for exploration of solid mineral resources+(No.1 modification sheet)
固体矿产勘查工作规范+(第1号修改单) |
China National Standards lid |
English PDF |
| GB/T 3960-2016 |
Plastics—Test method for friction and wear by sliding 塑料 滑动摩擦磨损试验方法 |
China National Standards lid |
English PDF |
| GB/T 6730.35-2016 |
Iron ores—Determination of copper content—Oxalic acid bis-cyclohexylidene hydragide (cuprizone) spectrophotometric method 铁矿石 铜含量的测定 双环己酮草酰二腙分光光度法 |
China National Standards lid |
English PDF |
| GB/T 33069-2016 |
Determination of 1-vinyl-2-pyrrolidinone homopolymer for industrial use 工业用聚N-乙烯基吡咯烷酮检测方法 |
China National Standards lid |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
