China National Standards

China loading GB Standards List


  •  China "loading" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 12428-2023 Calculation method of passenger car loading mass {译}
    客车装载质量计算方法
    China National Standards
    loading

    English PDF
    GB/T 17382-2023 Series 1 Containers loading, Unloading and Bolting {译}
    系列1集装箱 装卸和栓固
    China National Standards
    loading

    English PDF
    GB/Z 43065.2-2023 Robots Safety Design of Industrial Robot Systems Part 2: Manual loading/Unloading Workstations {译}
    机器人 工业机器人系统的安全设计 第2部分:手动装载/卸载工作站
    China National Standards
    loading

    English PDF
    GB/T 8094-2023 Harvesting machinery—Combine harvesters—Determination of grain tank capacity and performance of grain unloading mechanism {译}
    收获机械 联合收割机 粮箱容量及卸粮机构性能的测定
    China National Standards
    loading

    English PDF
    GB/T 41576-2022 Requirements for unit performance test after fuel loading in pressurized water reactor nuclear power plant {译}
    压水堆核电厂装料后机组性能试验要求
    China National Standards
    loading

    English PDF
    GB/T 41584-2022 Requirements for thermal state performance test before fuel loading in pressurized water reactor nuclear power plant {译}
    压水堆核电厂装料前热态性能试验要求
    China National Standards
    loading

    English PDF
    GB/T 41587-2022 Requirements for cold-state performance test before fuel loading in pressurized water reactor nuclear power plant {译}
    压水堆核电厂装料前冷态性能试验要求
    China National Standards
    loading

    English PDF
    GB/T 42032-2022 Design Requirements for Civil Aircraft loading Manifest {译}
    民用飞机装载舱单设计要求
    China National Standards
    loading

    English PDF
    GB/T 40497-2021 Evaluation principles for the design of offshore facilities against fire and blast loading
    海上设施防火与防爆设计评估原则
    China National Standards
    loading

    English PDF
    GB/T 39598-2021 A guide to the limited quantity in indoor loading for wood-based panel based on its ultimate formaldehyde emission
    基于极限甲醛释放量的人造板室内承载限量指南
    China National Standards
    loading

    English PDF
    GB/T 8100.3-2021 Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves
    液压阀安装面 第3部分:减压阀、顺序阀、卸荷阀、节流阀和单向阀
    China National Standards
    loading

    English PDF
    GB/T 40708-2021 Container transportation electronic data interchange—Container discharge/loading (vessel) report message
    集装箱运输电子数据交换 集装箱装卸(船)报告报文
    China National Standards
    loading

    English PDF
    GB/T 39210-2020 Draught and soil loading system of hopper dredger
    耙吸挖泥船吃水装载系统
    China National Standards
    loading

    English PDF
    GB/T 38769-2020 Metallic materials-Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
    金属材料 预裂纹夏比试样冲击加载断裂韧性的测定
    China National Standards
    loading

    English PDF
    GB 9706.217-2020 Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment
    医用电气设备 第2-17部分:自动控制式近距离治疗后装设备的基本安全和基本性能专用要求
    China National Standards
    loading

    English PDF
    GB/T 37348-2019 Design guidelines for deck loading plan of self-elevating drilling units
    自升式钻井平台甲板载荷图设计指南
    China National Standards
    loading

    English PDF
    GB/T 32076.10-2018 High-strength structural bolting assemblies for preloading—Part 10:Assembly specifications
    预载荷高强度栓接结构连接副-第10部分:安装技术条件
    China National Standards
    loading

    English PDF
    GB/T 35016-2018 Continuous mechanical handling equipment—loading and unloading—Safety code
    连续搬运机械 装卸机械 安全规范
    China National Standards
    loading

    English PDF
    GB/T 26949.5-2018 Industrial trucks—Verification of stability—Part 5:Single-side-loading trucks
    工业车辆 稳定性验证 第5部分:侧面式叉车(单侧)
    China National Standards
    loading

    English PDF
    GB/T 21211-2017 Equivalent loading and superposition techniques—Indirect testing to determine temperature rise of rotating electrical machines
    等效负载和叠加试验技术 间接法确定旋转电机温升
    China National Standards
    loading

    English PDF
    GB/T 34525-2017 Safety rules for handling, loading and unloading, storing and using of cylinder
    气瓶搬运、装卸、储存和使用安全规定
    China National Standards
    loading

    English PDF
    GB/T 32076.8-2017 High-strength structural bolting assemblies for preloading—Part 8: Torshear type bolt with cup head,and nut assemblies
    预载荷高强度栓接结构连接副 第8部分:扭剪型圆头螺栓和螺母连接副
    China National Standards
    loading

    English PDF
    GB/T 32076.9-2017 High-strength structural bolting assemblies for preloading—Part 9: Torshear type bolt with hexagon head with large width across flats,and nut assemblies
    预载荷高强度栓接结构连接副 第9部分:扭剪型大六角头螺栓和螺母连接副
    China National Standards
    loading

    English PDF
    GB/T 35449-2017 Automatic quantitative loading vehicle system
    自动定量装车系统
    China National Standards
    loading

    English PDF
    GB/T 33333-2016 Determination of shear strength by tensile loading in wood adhesives
    木材胶粘剂拉伸剪切强度的试验方法
    China National Standards
    loading

    English PDF
    GB/T 33334-2016 Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies(composite and composite)
    胶粘剂单搭接拉伸剪切强度试验方法(复合材料对复合材料)
    China National Standards
    loading

    English PDF
    GB/T 33158-2016 Thermal insulating products for building applications—Determination of behaviour under cyclic loading
    建筑用绝热制品 循环载荷性能的测定
    China National Standards
    loading

    English PDF
    GB/T 32870-2016 Space science experiment—Technical specification to loading technology of biological sample
    空间科学实验 生物样品加载技术要求
    China National Standards
    loading

    English PDF
    GB/T 32076.7-2015 High-strength structural bolting assemblies for preloading—Part 7: M39~M64—Hexagon bolt with large width across flats and nut assemblies
    预载荷高强度栓接结构连接副 第7部分:M39~M64 大六角头螺栓和螺母连接副
    China National Standards
    loading

    English PDF
    GB/T 32076.6-2015 High-strength structural bolting assemblies for preloading—Part 6: Plain chamfered washers
    预载荷高强度栓接结构连接副 第6部分:倒角平垫圈
    China National Standards
    loading

    English PDF
    GB/T 32076.5-2015 High-strength structural bolting assemblies for preloading—Part 5: Plain washers
    预载荷高强度栓接结构连接副 第5部分:平垫圈
    China National Standards
    loading

    English PDF
    GB/T 32076.4-2015 High-strength structural bolting assemblies for preloading—Part 4: System HV—Hexagon bolt with large width across flats and nut assemblies
    预载荷高强度栓接结构连接副 第4部分:HV型 大六角头螺栓和螺母连接副
    China National Standards
    loading

    English PDF
    GB/T 32076.3-2015 High-strength structural bolting assemblies for preloading—Part 3: System HR—Hexagon bolt with large width across flats and nut assemblies
    预载荷高强度栓接结构连接副 第3部分:HR型 大六角头螺栓和螺母连接副
    China National Standards
    loading

    English PDF
    GB/T 32076.2-2015 High-strength structural bolting assemblies for preloading—Part 2: Suitability for preloading
    预载荷高强度栓接结构连接副 第2部分:预载荷适应性
    China National Standards
    loading

    English PDF
    GB/T 32076.1-2015 High-strength structural bolting assemblies for preloading—Part 1: General requirements
    预载荷高强度栓接结构连接副 第1部分:通用要求
    China National Standards
    loading

    English PDF
    GB/T 9279.2-2015 Paints and varnishes—Determination of scratch resistance —Part 2: Variable-loading method
    色漆和清漆 耐划痕性的测定 第2部分:负荷改变法
    China National Standards
    loading

    English PDF
    GB/T 9279.1-2015 Paints and varnishes—Determination of scratch resistance—Part 1: Constant-loading method
    色漆和清漆 耐划痕性的测定 第1部分:负荷恒定法
    China National Standards
    loading

    English PDF
    GB/T 13936-2014 Rubber,vulcanized―Method for determination of strength properties of adhesive to metal in shear by tension loading
    硫化橡胶 与金属粘接拉伸剪切强度测定方法
    China National Standards
    loading

    English PDF
    GB/T 30480-2013 Woodworking machines―Hand-loading veneering presses for flat surfaces―Nomenclature
    木工机床 手动上料平面压机 术语
    China National Standards
    loading

    English PDF
    GB/T 1094.12-2013 Power transformers―Part 12: loading guide for dry-type power transformers
    电力变压器 第12部分:干式电力变压器负载导则
    China National Standards
    loading

    English PDF
    GB/T 29857-2013 Ships and marine technology - Computer applications - Shipboard loading instruments
    船舶和海上技术 计算机应用 船用装载仪
    China National Standards
    loading

    English PDF
    GB 50816-2012 Code for design of wastewater treatment of ammunition loading
    弹药装药废水处理设计规范
    China National Standards
    loading

    English PDF
    GB 50759-2012 Code for design of vapor recovery facilities of oil products loading system
    油品装载系统油气回收设施设计规范
    China National Standards
    loading

    English PDF
    GB/T 26946.2-2011 Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6m length and above
    侧面式叉车 第2部分:搬运6m及其以上长度货运集装箱叉车的附加稳定性试验
    China National Standards
    loading

    English PDF
    GB/T 26946.1-2011 Single side loading fork-lift trucks - Part 1: Stability tests
    侧面式叉车 第1部分:稳定性试验
    China National Standards
    loading

    English PDF
    GB 14470.3-2011 Effluent standads of water pollutants for ammunition loading
    弹药装药行业水污染物排放标准
    China National Standards
    loading

    English PDF
    GB 25525-2010 Track-type loading machine underground mine - Safety requirements
    地下矿用履带装载机械 安全要求
    China National Standards
    loading

    English PDF
    GB 25524-2010 Track wheel loading machine for underground mine - Safety requirements
    地下矿用轨轮装载机械 安全要求
    China National Standards
    loading

    English PDF
    GB 24939-2010 Tri-wheel vehicle self-unloading system - Safety requirements
    三轮汽车自卸系统 安全技术要求
    China National Standards
    loading

    English PDF
    GB 24938-2010 Low-speed goods vehicle - Self-unloading system - Safety requirements
    低速货车自卸系统 安全技术要求
    China National Standards
    loading

    English PDF
    GB/T 24496-2009 Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels - Laboratory mechanical tests - Effect of tangential loading
    钢筋混凝土大板间有连接筋并用混凝土浇灌的键槽式竖向接缝 实验室力学试验 平面内切向荷载的影响
    China National Standards
    loading

    English PDF
    GB/T 24495-2009 Horizontal joints between load-bearing walls and concrete floors - Laboratory mechanical tests - Effect of vertical loading and of moments transmitted by the floors
    承重墙与混凝土楼板间的水平接缝 实验室力学试验 由楼板传来的垂直荷载和弯矩的影响
    China National Standards
    loading

    English PDF
    GB/T 24185-2009 Test method for measurement of hydrogen embrittlement threshold in steel by the incremental step loading method
    逐级加力法测定钢中氢脆临界值试验方法
    China National Standards
    loading

    English PDF
    GB 12602-2009 Lifting appliances-safety devices against overloading
    起重机械超载保护装置
    China National Standards
    loading

    English PDF
    GB/T 15328-2009 Classical V-belts - Fatigue test -non-loading method
    普通V带疲劳试验方法 无扭矩法
    China National Standards
    loading

    English PDF
    GB/T 23421-2009 Aircraft - Basic requirements for aircraft loading equipment+(No.1 modification sheet)
    飞机装载设备基本要求+(第1号修改单)
    China National Standards
    loading

    English PDF
    GB 9706.13-2008 Medical electrical equipment - Part 2: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment
    医用电气设备 第2部分:自动控制式近距离治疗后装设备安全专用要求
    China National Standards
    loading

    English PDF
    GB 17918-2008 Safety regulations for dust explosion protection in raw grain loading and unloading system in port
    港口散粮装卸系统粉尘防爆安全规程
    China National Standards
    loading

    English PDF
    GB/T 1094.7-2008 Power transformers - Part 7: loading guide for oil-immersed power transformers
    电力变压器 第7部分:油浸式电力变压器负载导则
    China National Standards
    loading

    English PDF
    GB/T 21942-2008 Earth-moving machinery - Loader and front loading excavator buckets - Volumetric ratings
    土方机械 装载机和正铲挖掘机的铲斗 容量标定
    China National Standards
    loading

    English PDF
    GB/T 15248-2008 The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials
    金属材料轴向等幅低循环疲劳试验方法
    China National Standards
    loading

    English PDF
    GB/T 21211-2007 Roating electrical machines - Equivalent loading and super-position techniques - Indirect testing to determine temperature rise
    等效负载和叠加试验技术 间接法确定旋转电机温升
    China National Standards
    loading

    English PDF
    GB/T 328.25-2007 Test methods for building sheets for waterproofing - part 25: Bitumen,plastic and rubber sheets for waterproofing-resistance to static loading
    建筑防水卷材试验方法 第25部分:沥青和高分子防水卷材 抗静态荷载
    China National Standards
    loading

    English PDF
    GB/T 8100-2006 Hydraulic fluid power―Pressure-reducing valves,sequence valves,unloading valves,throttle valves and check valves―Mounting surfaces
    液压传动 减压阀、顺序阀、卸荷阀、节流阀和单向阀 安装面
    China National Standards
    loading

    English PDF
    GB/T 7679.2-2005 Mining machinery terminology Part 2:loading cquipment
    矿山机械术语 第2部分:装载设备
    China National Standards
    loading

    English PDF
    GB/T 9482-2005 Agricultural machines implements and equipment Dimensions for mechanical loading with bulk goods
    农业机械和设备 散装物料机械装载尺寸
    China National Standards
    loading

    English PDF
    GB/T 8094-2005 Equipment for harvesting-Combine harvesters-Determination and designation of grain tank capacity and unloading device performance
    收获机械 联合收割机 粮箱容量及卸粮机构性能的测定
    China National Standards
    loading

    English PDF
    GB/T 5352-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination for external loading properties by parallel-plate loading
    纤维增强热固性塑料管平行板 外载性能试验方法
    China National Standards
    loading

    English PDF
    GB/T 18375.6-2004 Prosthetics--Structural testing of lower-limb prostheses--Part 6:loading parameters of supplementary structural tests
    假肢 下肢假肢的结构检验 第6部分:辅助结构检验中的加载参数
    China National Standards
    loading

    English PDF
    GB/T 16273.6-2003 Graphical symbols for use on equipment--Part 6: Common symbols for conveying,vehicle testing and loading machine
    设备用图形符号 第6部分: 运输、车辆检测及装载机械通用符号
    China National Standards
    loading

    English PDF
    GB/T 18375.4-2001 Prosthetics--Structural testing of lower-limb prostheses--Part 4:loading parameters of principal struct-ural tests
    假肢 下肢假肢的结构检验 第4部分:主结构检验中的加载参数
    China National Standards
    loading

    English PDF
    GB/T 3098.17-2000 Mechanical properties of fasteners--Preloading test for the detection of hydrogen embrittlement--Parallel bearing surface method
    紧固件机械性能 检查氢脆用预载荷试验 平行支承面法
    China National Standards
    loading

    English PDF
    GB/T 17517-1998 Adhesives--Wood to wood adhesive bonds--Determination of shear strength by compression loading
    胶粘剂压缩剪切强度试验方法 木材与木材
    China National Standards
    loading

    English PDF
    GB/T 16526-1996 Test method of measuring the lead-to-lead and loading capacitance of package leads
    封装引线间电容和引线负载电容测试方法
    China National Standards
    loading

    English PDF
    GB 16364-1996 Radiological protection standard for gamma-ray afterloading brachytherapy
    后装γ源近距离治疗放射卫生防护标准
    China National Standards
    loading

    English PDF
    GB/T 7750-1987 Test method of creep properties of adhesive in shear by tension loading (metal to metal)
    胶粘剂拉伸剪切蠕变性能试验方法 (金属对金属)
    China National Standards
    loading

    English PDF

    Find out:76Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards