Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB 16423-2020 |
Safety regulation for metal and nonmetal mines 金属非金属矿山安全规程 |
China National Standards non |
 English PDF |
| GB/T 10573-2020 |
Tensile testing method for fine wire of nonferrous metals 有色金属细丝拉伸试验方法 |
China National Standards non |
English PDF |
| GB/T 24242.1-2020 |
non-alloy steel wire rod for conversion to wire—Part 1：General requirements 制丝用非合金钢盘条 第1部分：一般要求 |
China National Standards non |
English PDF |
| GB/T 24242.2-2020 |
non-alloy steel wire rod for conversion to wire —Part 2：Specific requirements for general purpose wire rod 制丝用非合金钢盘条 第2部分:一般用途盘条 |
China National Standards non |
English PDF |
| GB/T 24242.4-2020 |
non-alloy steel wire rod for conversion to wire —Part 4：Specific requirements for special purpose wire rod 制丝用非合金钢盘条 第4部分：特殊用途盘条 |
China National Standards non |
English PDF |
| GB/T 5097-2020 |
non-destructive testing—Penetrant testing and magnetic particle testing—Viewing conditions 无损检测 渗透检测和磁粉检测 观察条件 |
China National Standards non |
English PDF |
| GB/T 39018-2020 |
Intelligent lighting equipment—non-active mode power measurement 智能照明设备 非主功能模式功率的测量 |
China National Standards non |
English PDF |
| GB/T 20671.3-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分:垫片材料耐液性试验方法 |
China National Standards non |
English PDF |
| GB/T 20671.5-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials 非金属垫片材料分类体系及试验方法 第5部分：垫片材料蠕变松弛率试验方法 |
China National Standards non |
English PDF |
| GB/T 20671.6-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分：垫片材料与金属表面黏附性试验方法 |
China National Standards non |
English PDF |
| GB/T 8763-2020 |
Test methods for gas absorption characteristic of non-evaporation gettering materials and products 非蒸散型吸气材料及制品吸气性能测试方法 |
China National Standards non |
English PDF |
| GB/T 38952-2020 |
non-destructive testing—Testing method for measuring residual stress using bulk wave 无损检测 残余应力超声体波检测方法 |
China National Standards non |
English PDF |
| GB/T 38940-2020 |
non-destructive testing—Testing method of small-angle neutron scattering 无损检测 中子小角散射检测方法 |
China National Standards non |
English PDF |
| GB/T 38898-2020 |
non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave 无损检测 涂层结合强度超声检测方法 |
China National Standards non |
English PDF |
| GB/T 38897-2020 |
non-destructive testing—Measurement method for material elastic modulus and Poisson’s ratio using ultrasoinc velocity 无损检测 弹性模量和泊松比的超声测量方法 |
China National Standards non |
English PDF |
| GB/T 38896-2020 |
non-destructive testing—Integrated non-destructive testing—General principles 无损检测 集成无损检测 总则 |
China National Standards non |
English PDF |
| GB/T 38895-2020 |
non-destructive testing—Guidelines for electromagnetic acoustic transducers (EMATs) 无损检测 电磁声换能器（EMATs）指南 |
China National Standards non |
English PDF |
| GB/T 38894-2020 |
non-destructive testing—Electrochemical testing—General principles 无损检测 电化学检测 总则 |
China National Standards non |
English PDF |
| GB/T 38883-2020 |
non-destructive testing—Active thermographic testing method 无损检测 主动式红外热成像检测方法 |
China National Standards non |
English PDF |
| GB/T 38882-2020 |
non-destructive testing—Testing method for wall-thickness loss of ferromagnetic tubes using magnetic flux leakage 无损检测 铁磁性管件壁厚变化漏磁检测方法 |
China National Standards non |
English PDF |
| GB/T 38881-2020 |
non-destructive testing—Cloud-testing—General principles 无损检测 云检测 总则 |
China National Standards non |
English PDF |
| GB/T 38696.2-2020 |
Eye and face protection—Intense light sources(non-laser) protector—Part 2: Guidance for use 眼面部防护 强光源（非激光）防护镜 第2部分：使用指南 |
China National Standards non |
English PDF |
| GB/T 38696.1-2020 |
Eye and face protection—Intense light sources(non-laser) protector—Part 1: Technical requirements 眼面部防护 强光源（非激光）防护镜 第1部分：技术要求 |
China National Standards non |
English PDF |
| GB/T 9771.6-2020 |
Single-mode optical fibres for telecommunication—Part 6: Characteristics of a fibre with non-zero dispersion for wideband optical transport 通信用单模光纤 第6部分：宽波长段光传输用非零色散单模光纤特性 |
China National Standards non |
English PDF |
| GB/T 9771.5-2020 |
Single-mode optical fibres for telecommunication—Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre 通信用单模光纤 第5部分：非零色散位移单模光纤特性 |
China National Standards non |
English PDF |
| GB/T 20671.1-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 1：Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分:非金属垫片材料分类体系 |
China National Standards non |
English PDF |
| GB 7300.601-2020 |
Feed additives－Part 6：non－protein Nitrogen－Urea 饲料添加剂 第6部分：非蛋白氮 尿素 |
China National Standards non |
English PDF |
| GB/T 38758-2020 |
Pneumatic fluid power—Rules of non-ferrous metallic cylinder body 气动 有色金属缸筒技术要求 |
China National Standards non |
English PDF |
| GB/T 38647.2-2020 |
Information technology—Security techniques—Anonymous digital signatures—Part 2: Mechanisms using a group public key 信息技术 安全技术 匿名数字签名 第2部分：采用群组公钥的机制 |
China National Standards non |
English PDF |
| GB/T 34953.4-2020 |
Information technology—Security techniques—Anonymous entity authentication—Part 4: Mechanisms based on weak secrets 信息技术 安全技术 匿名实体鉴别 第4部分：基于弱秘密的机制 |
China National Standards non |
English PDF |
| GB/T 28239-2020 |
Limits and measurement methods for non-road diesel engine specific fuel consumption 非道路用柴油机燃料消耗率限值及试验方法 |
China National Standards non |
English PDF |
| GB/T 38462-2020 |
Textiles－nonwoven Fabrics for Isolation Gowns 纺织品 隔离衣用非织造布 |
China National Standards non |
English PDF |
| GB 51415-2020 |
Technical standard for waste gas control of non-ferrous smelting 有色金属冶炼废气治理技术标准 |
China National Standards non |
English PDF |
| GB 51414-2020 |
Standard for water saving design in non-ferrous metals enterprises 有色金属企业节水设计标准 |
China National Standards non |
English PDF |
| GB/T 51413-2020 |
Standard for design of waste heat utilization in non-ferrous metal industry 有色金属工业余热利用设计标准 |
China National Standards non |
English PDF |
| GB 31604.50-2020 |
National food safety standard - Food contact materials and articles - Determination of nonylphenol migration 食品安全国家标准 食品接触材料及制品 壬基酚迁移量的测定 |
China National Standards non |
English PDF |
| GB/T 21838.4-2020 |
Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards non |
English PDF |
| GB/T 17268-2020 |
non-refillable steel welded cylinders for industrial use 工业用非重复充装焊接钢瓶 |
China National Standards non |
English PDF |
| GB/T 14480.3-2020 |
non-destructive testing instruments—Equipment for eddy current examination—Part 3: System characteristics and verification 无损检测仪器 涡流检测设备 第3部分：系统性能和检验 |
China National Standards non |
English PDF |
| GB/T 7383-2020 |
non-ionic surface active agents—Determination of hydroxyl value 非离子表面活性剂 羟值的测定 |
China National Standards non |
English PDF |
| GB/T 15076.7-2020 |
Part 7: Determination of phosphorus content in niobium 4-methyl-pentanone- [2] extraction and separation of phosphorus molybdenum blue spectrophotometry and inductively coupled plasma atomic emission spectrometry 钽铌化学分析方法 第7部分：铌中磷量的测定 4-甲基-戊酮-[2]萃取分离磷钼蓝分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards non |
English PDF |
| GB/T 39432-2020 |
non-destructive testing—Ultrasonic testing—Specification for step wedge calibration block 无损检测 超声检测 阶梯试块 |
China National Standards non |
English PDF |
| GB/T 39429-2020 |
non-destructive testing—Method for thermoelectric sorting of electrically conductive materials 无损检测 导电材料热电势分选方法 |
China National Standards non |
English PDF |
| GB/T 39427-2020 |
non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source 无损检测 工业Ir192伽玛射线源尺寸测定方法 |
China National Standards non |
English PDF |
| GB/T 39383-2020 |
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法 |
China National Standards non |
English PDF |
| GB/T 39379-2020 |
Thermoplastics piping systems for non-pressure applications—Test method for watertightness 无压热塑性塑料管道系统 水密性试验方法 |
China National Standards non |
English PDF |
| GB/T 39358-2020 |
Forest certification in China—non-timber forest products management 中国森林认证 非木质林产品经营 |
China National Standards non |
English PDF |
| GB/T 39283-2020 |
non-destructive testing—Testing method for surface-wave testing using electromagnetic acoustic transducer (EMAT) techniques 无损检测 电磁声换能器（EMAT）技术表面波检测方法 |
China National Standards non |
English PDF |
| GB/T 39282-2020 |
non-destructive testing—Testing method for pulse-echo testing using electromagnetic acoustic transducer (EMAT) techniques 无损检测 电磁声换能器（EMAT）技术脉冲回波检测方法 |
China National Standards non |
English PDF |
| GB/T 39280-2020 |
Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels 钨极惰性气体保护电弧焊用非合金钢及细晶粒钢实心焊丝 |
China National Standards non |
English PDF |
| GB/T 39242-2020 |
non-destructive testing—Ultrasonic testing—Sensitivity and range setting 无损检测 超声检测 灵敏度和范围设定 |
China National Standards non |
English PDF |
| GB/T 39241-2020 |
non-destructive testing—Ultrasonic testing—Transmission technique 无损检测 超声检测 穿透技术 |
China National Standards non |
English PDF |
| GB/T 39240-2020 |
non-destructive testing—Ultrasonic testing—General principles 无损检测 超声检测 总则 |
China National Standards non |
English PDF |
| GB/T 39239-2020 |
non-destructive testing—Ultrasonic testing—Characterization and sizing of discontinuities 无损检测 超声检测 不连续的特征和定量 |
China National Standards non |
English PDF |
| GB/T 39238-2020 |
non-destructive testing—Ultrasonic testing—Examination for discontinuities perpendicular to the surface 无损检测 超声检测 垂直于表面的不连续的检测 |
China National Standards non |
English PDF |
| GB/T 39172-2020 |
non-steel wire rope suspension means for lifts 电梯用非钢丝绳悬挂装置 |
China National Standards non |
English PDF |
| GB/T 34370.9-2020 |
nondestructive testing of amusement equipments—Part 9: Magnetic flux leakage testing 游乐设施无损检测 第9部分：漏磁检测 |
China National Standards non |
English PDF |
| GB/T 34370.8-2020 |
nondestructive testing of amusement equipments—Part 8: Acoustic emission testing 游乐设施无损检测 第8部分：声发射检测 |
China National Standards non |
English PDF |
| GB/T 34370.7-2020 |
nondestructive testing of amusement equipments—Part 7: Eddy current testing 游乐设施无损检测 第7部分：涡流检测 |
China National Standards non |
English PDF |
| GB/T 34370.11-2020 |
nondestructive testing of amusement equipments—Part 11: Ultrasonic guided wave testing 游乐设施无损检测 第11部分：超声导波检测 |
China National Standards non |
English PDF |
| GB/T 34370.10-2020 |
nondestructive testing of amusement equipments—Part 10: Magnetic memory testing 游乐设施无损检测 第10部分：磁记忆检测 |
China National Standards non |
English PDF |
| GB/T 19408.6-2020 |
Agricultural vehicles—Mechanical connections between towed and towing vehicles—Part 6：Specifications for non-swivel clevis couplings 农业车辆 挂车和牵引车的机械连接 第6部分：非摆动式U型钩的连接 |
China National Standards non |
English PDF |
| GB/T 18852-2020 |
non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams 无损检测 超声检测 测量接触探头声束特性的参考试块和方法 |
China National Standards non |
English PDF |
| GB/T 12604.5-2020 |
non-destructive testing—Terminology—Magnetic particle testing 无损检测 术语 磁粉检测 |
China National Standards non |
English PDF |
| GB/T 12604.1-2020 |
non-destructive testing—Terminology—Ultrasonic testing 无损检测 术语 超声检测 |
China National Standards non |
English PDF |
| GB/T 8110-2020 |
Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels 熔化极气体保护电弧焊用非合金钢及细晶粒钢实心焊丝 |
China National Standards non |
English PDF |
| GB/T 5169.46-2020 |
Fire hazard testing for electric and electronic products—Part 46: Test flames—Determination of the characteristic heat flux for ignition from a non-contacting flame source 电工电子产品着火危险试验 第46部分：试验火焰 非接触火焰源中起燃时特征热通量的测定 |
China National Standards non |
English PDF |
| GB/T 39248-2020 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范 |
China National Standards non |
English PDF |
| GB/T 335-2019 |
non-self-indicating instrument 非自行指示秤 |
China National Standards non |
English PDF |
| GB/T 51404-2019 |
Technical standard for leachate collection system of non- ferrous metal heap leaching 有色金属堆浸场浸出液收集系统技术标准 |
China National Standards non |
English PDF |
| GB/T 38014-2019 |
Textiles－Protective nonwoven fabrics for surgical use 纺织品 手术防护用非织造布 |
China National Standards non |
English PDF |
| GB/T 38265.2-2019 |
Test methods for soft soldering fluxes—Part 2: Determination of non-volatile matter—Ebulliometric method 软钎剂试验方法 第2部分：不挥发物质含量的测定 沸点法 |
China National Standards non |
English PDF |
| GB/T 38265.1-2019 |
Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method 软钎剂试验方法 第1部分：不挥发物质含量的测定 重量法 |
China National Standards non |
English PDF |
| GB/T 25429-2019 |
Petroleum drilling and production equipment—Drill string non-return valve 石油天然气钻采设备 钻具止回阀 |
China National Standards non |
English PDF |
| GB/T 8427-2019 |
Textiles－Tests for color fastness－Color fastness to artificial light：Xenon arc 纺织品 色牢度试验 耐人造光色牢度：氙弧 |
China National Standards non |
English PDF |
| GB/T 38265.1-2019 |
Test methods for soft soldering fluxes—Part 1:Determination of non-volatile matter—Gravimetric method 软钎剂试验方法 第1部分：不挥发物质含量的测定 重量法 |
China National Standards non |
English PDF |
| GB/T 37997-2019 |
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification 输送烃类、溶剂和化学品用多层热塑性塑料（非硫化）软管及软管组合件 规范 |
China National Standards non |
English PDF |
| GB/T 37930-2019 |
non-destructive testing instruments—Technical specifications of X-ray real-time imaging system for automobile wheel 无损检测仪器 汽车轮毂X射线实时成像检测仪技术要求 |
China National Standards non |
English PDF |
| GB/T 37929-2019 |
non-destructive testing instruments—Testing methods for life of X-ray tubes 无损检测仪器 X射线管寿命试验方法 |
China National Standards non |
English PDF |
| GB/T 37910.2-2019 |
non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys 焊缝无损检测 射线检测验收等级 第2部分: 铝及铝合金 |
China National Standards non |
English PDF |
| GB/T 37910.1-2019 |
non-destructive testing of welds—Acceptance levels for radiographic testing—Part 1:Steel,nickel,titanium and their alloys 焊缝无损检测 射线检测验收等级 第1部分：钢、镍、钛及其合金 |
China National Standards non |
English PDF |
| GB/T 37895-2019 |
Dimensions of accessories for cutter arbors with parallel key and tenon drive 带平键和端键传动铣刀杆附件的尺寸 |
China National Standards non |
English PDF |
| GB/T 37891.6-2019 |
Cutter arbors with parallel key and tenon drive—Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system 带平键和端键传动的铣刀杆 第6部分：带钢球拉紧系统的模块圆锥柄刀杆的尺寸和标记 |
China National Standards non |
English PDF |
| GB/T 37891.5-2019 |
Cutter arbors with parallel key and tenon drive—Part 5:Dimensions and designation of tool holders with polygonal taper interface with flange contact surface 带平键和端键传动的铣刀杆 第5部分：带法兰接触面的多棱锥柄刀杆的尺寸和标记 |
China National Standards non |
English PDF |
| GB/T 37891.4-2019 |
Cutter arbors with parallel key and tenon drive—Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers 带平键和端键传动的铣刀杆 第4部分：带7:24手动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards non |
English PDF |
| GB/T 37891.3-2019 |
Cutter arbors with parallel key and tenon drive—Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers 带平键和端键传动的铣刀杆 第3部分：带7:24自动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards non |
English PDF |
| GB/T 37891.2-2019 |
Cutter arbors with parallel key and tenon drive—Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface 带平键和端键传动的铣刀杆 第2部分：带法兰接触面的空心圆锥柄刀杆的尺寸和标记 |
China National Standards non |
English PDF |
| GB/T 37891.1-2019 |
Cutter arbors with parallel key and tenon drive—Part 1: General dimensions 带平键和端键传动的铣刀杆 第1部分：通用尺寸 |
China National Standards non |
English PDF |
| GB/T 37852-2019 |
Class containers—Height and non-parallelism of finish with reference to container base—Test methods 玻璃容器 以容器底部作基准的高度和口部不平行度 试验方法 |
China National Standards non |
English PDF |
| GB/T 37400.14-2019 |
Heavy mechanical general technical specification—Part 14: nondestructive test of steel castings 重型机械通用技术条件 第14部分：铸钢件无损探伤 |
China National Standards non |
English PDF |
| GB 2626-2019 |
Respiratory protection—non-powered air-purifying particle respirator 呼吸防护 自吸过滤式防颗粒物呼吸器 |
China National Standards non |
English PDF |
| GB/T 37598-2019 |
Inspection of non-metallic inclusions in steel—Blue fracture test method 钢中非金属夹杂物的检验 发蓝断口法 |
China National Standards non |
English PDF |
| GB/T 37591-2019 |
Cold-rolled non-grain oriented electrical steel strip specialized for large generators with power of 700MW or higher 700MW及以上级大电机用冷轧无取向电工钢带 |
China National Standards non |
English PDF |
| GB/T 37579-2019 |
Aluminum alloy extruded tubes for non-nuclear grade nuclear power cooling systems 非核级核电冷却用铝合金挤压管材 |
China National Standards non |
English PDF |
| GB/T 37692-2019 |
Running mode specific fuel consumption limits and measurement methods for small spark ignition engines of non-road mobile machinery 非道路移动机械用小型点燃式发动机工况法燃料消耗率限值与测量方法 |
China National Standards non |
English PDF |
| GB/T 37640-2019 |
：Determination of chloroacetaldehyde,2,4-dihydroxy-3-methylbenzaldehyde,crotonaldehyde,acetophenone,2-pentylidenecyclohexanone and glutaral in cosmetics—High performance liquid chromatography 化妆品中氯乙醛、2,4-二羟基-3-甲基苯甲醛、巴豆醛、苯乙酮、2-亚戊基环己酮、戊二醛含量的测定 高效液相色谱法 |
China National Standards non |
English PDF |
| GB/Z 37627.1-2019 |
Aluminum alloy extruded tubes for non-nuclear grade nuclear power cooling systems 架空电力线路和高压设备的无线电干扰特性 第1部分：现象描述 |
China National Standards non |
English PDF |
| GB/T 37540-2019 |
non-destructive testing—Digital image processing and communication for eddy current testing 无损检测 涡流检测数字图像处理与通信 |
China National Standards non |
English PDF |
| GB/T 23901.5-2019 |
non-destructive testing—Image quality of radiographs—Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators 无损检测 射线照相检测图像质量 第5部分：双丝型像质计图像不清晰度的测定 |
China National Standards non |
English PDF |
| GB/T 23901.4-2019 |
non-destructive testing—Image quality of radiographs—Part 4: Experimental evaluation of image quality values and image quality tables 无损检测 射线照相检测图像质量 第4部分：像质值和像质表的实验评价 |
China National Standards non |
English PDF |
| GB/T 23901.3-2019 |
non-destructive testing—Image quality of radiographs—Part 3:Image quality classes 无损检测 射线照相检测图像质量 第3部分：像质分类 |
China National Standards non |
English PDF |
| GB/T 23901.2-2019 |
non-destructive testing—Image quality of radiographs—Part 2:Determination of the image quality value using step/hole-type image quality indicators 无损检测 射线照相检测图像质量 第2部分：阶梯孔型像质计像质值的测定 |
China National Standards non |
English PDF |
| GB/T 20629.3-2019 |
non-cellulosic papers for electrical purposes—Part 3: Unfilled aramid (aromatic polyamide) papers 电气用非纤维素纸 第3部分：无填充聚芳酰胺纤维纸 |
China National Standards non |
English PDF |
| GB/T 37363.1-2019 |
Determination of biocides content of coating materials—Part 1:Determination of isothiazolinones content 涂料中生物杀伤剂含量的测定 第1部分：异噻唑啉酮含量的测定 |
China National Standards non |
English PDF |
| GB/T 37665-2019 |
：non-destructive testing for chemical compositions of ancient ceramics—PIXE analysis technique standards 古陶瓷化学组成无损检测 PIXE分析技术规范 |
China National Standards non |
English PDF |
| GB/T 37454-2019 |
Design method for non-powered axles of rolling stock 铁路车辆非动力车轴设计方法 |
China National Standards non |
English PDF |
| GB/T 37425-2019 |
Packaging—Flexible intermediate bulk containers(FIBCs) for non-dangerous goods 包装 非危险货物用柔性中型散装容器 |
China National Standards non |
English PDF |
| GB/T 37400.15-2019 |
Heavy mechanical general technical specification—Part 15:nondestructive test of steel forgings 重型机械通用技术条件 第15部分：锻钢件无损探伤 |
China National Standards non |
English PDF |
| GB/T 23901.1-2019 |
non-destructive testing—Image quality of radiographs—Part 1:Determination of the image quality value using wire-type image quality indicators 无损检测 射线照相检测图像质量 第1部分：丝型像质计像质值的测定 |
China National Standards non |
English PDF |
| GB/T 5513-2019 |
Inspection of grain and oils—Determination of reduced sugar and non-reduced sugar in grain 粮油检验 粮食中还原糖和非还原糖测定 |
China National Standards non |
English PDF |
| GB/T 37400.12-2019 |
Heavy mechanical general technical specification—Part 5：nonferrous metal casting 重型机械通用技术条件 第12部分：涂装 |
China National Standards non |
English PDF |
| GB 7296-2018 |
Feed additive—Thiamine mononitrate（Vitamin B1） 饲料添加剂-硝酸硫胺-(维生素B1) |
China National Standards non |
English PDF |
| GB/T 37158-2018 |
non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT) 无损检测-工业计算机层析成像（CT）检测最大可检测钢厚度测试方法 |
China National Standards non |
English PDF |
| GB/T 37122-2018 |
non-destructive testing—Phantom of maximum detectable steel thickness for industrial computed tomography(CT) 无损检测-工业计算机层析成像（CT）-检测用最大可检测钢厚度测试卡 |
China National Standards non |
English PDF |
| GB/T 37121-2018 |
non-destructive testing—Crack phantom for industrial computed tomography (CT) testing 无损检测-工业计算机层析成像（CT）检测用裂纹测试卡 |
China National Standards non |
English PDF |
| GB/T 37166-2018 |
non-destructive testing—Test method of composite materials for industrial computed tomography (CT) 无损检测-复合材料工业计算机层析成像（CT）检测方法 |
China National Standards non |
English PDF |
| GB/T 37034.2-2018 |
Process management for avionics—Counterfeit prevention—Part2：Managing electronic components from non-franchised sources 航空电子过程管理-防伪-第2部分：来源于非授权经销商电子元器件的管理 |
China National Standards non |
English PDF |
| GB/T 25121.2-2018 |
Railway applications—Rolling stock equipment—Capacitors for power electronics—Part 2: Aluminium electrolytic capacitors with non-solid electrolyte 轨道交通-机车车辆设备-电力电子电容器-第2部分：非固体电解质铝电解电容器 |
China National Standards non |
English PDF |
| GBZ/T 300.162-2018 |
Determination of toxic substances in workplace air - Part 162: Benzoquinone 工作场所空气有毒物质测定-第162部分：苯醌 |
China National Standards non |
English PDF |
| GB 5768.7-2018 |
Road traffic signs and markings—Part 7：non-motor vehicles and pedestrians 道路交通标志和标线-第7部分：非机动车和行人 |
China National Standards non |
English PDF |
| GB/T 51339-2018 |
non-coal mine mining terminology standard 非煤矿山采矿术语标准 |
China National Standards non |
English PDF |
| GB/T 37208-2018 |
nonmetallic paper based wet type frictional materials 非金属纸基湿式摩擦材料 |
China National Standards non |
English PDF |
| GB/T 37209-2018 |
nonmetallic rubber base wet type frictional materials 非金属橡胶基湿式摩擦材料 |
China National Standards non |
English PDF |
| GB/T 26068-2018 |
Test method for carrier recombination lifetime in silicon wafers and silicon ingots—non-contact measurement of photoconductivity decay by microwave reflectance method 硅片和硅锭载流子复合寿命的测试-非接触微波反射光电导衰减法 |
China National Standards non |
English PDF |
| GB/T 51300-2018 |
Construction organization design standard for non-coal mine roadway engineering 非煤矿山井巷工程施工组织设计标准 |
China National Standards non |
English PDF |
| GB 36886-2018 |
Limit and measurement methods for exhaust smoke form non-road mobile machinery equipped with diesel engine 非道路柴油移动机械排气烟度限值及测量方法 |
China National Standards non |
English PDF |
| GB 50421-2018 |
non-ferrous metal mine dump site design standards 有色金属矿山排土场设计标准 |
China National Standards non |
English PDF |
| GB/T 36232-2018 |
non-destructive testing of welds—Test method on electron-beam welded joints by industrial computed tomography(CT) 焊缝无损检测 电子束焊接接头工业计算机层析成像（CT）检测方法 |
China National Standards non |
English PDF |
| GB/T 36228-2018 |
non-destructive testing—Guide for plannar flaw height sizing by ultrasonic testing 无损检测 平面型伤高度超声定量导则 |
China National Standards non |
English PDF |
| GB/T 10045-2018 |
Tubular cored electrodes for non-alloy and fine grain steels 非合金钢及细晶粒钢药芯焊丝 |
China National Standards non |
English PDF |
| GB/T 778.4-2018 |
Meters for cold potable water and hot water—Part 4：non-metrological requirements not covered in GB/T 778.1 饮用冷水水表和热水水表 第4部分：GB/T 778.1中未包含的非计量要求 |
China National Standards non |
English PDF |
| GB/T 35090-2018 |
non-destructive testing—Test method for weak magnetic testing of pipeline 无损检测 管道弱磁检测方法 |
China National Standards non |
English PDF |
| GB/T 36416.2-2018 |
Testing machine vocabulary—Part 2: non-destructive testing instruments 试验机词汇 第2部分：无损检测仪器 |
China National Standards non |
English PDF |
| GB/T 15711-2018 |
Inspection of non-metallic inclusions of steel—Etching test method of tower samples 钢中非金属夹杂物的检验 塔形发纹酸浸法 |
China National Standards non |
English PDF |
| GB/T 36212-2018 |
non-destructive testing—Acoustic testing method and evaluation for the cement bond of underground metal component 无损检测 地下金属构件水泥防护层胶结声波检测及结果评价 |
China National Standards non |
English PDF |
| GB/T 12690.15-2018 |
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides―Part 15: Determination of calcium content 稀土金属及其氧化物中非稀土杂质 化学分析方法 第15部分：钙量的测定 |
China National Standards non |
English PDF |
| GB/T 14896.9-2018 |
non-traditional machines—Terminology—Part 9：Laser processing machines 特种加工机床 术语 第9部分：激光加工机床 |
China National Standards non |
English PDF |
| GB/T 33260.5-2018 |
Capability of detection—Part 5: Methodology in the linear and nonlinear calibration cases 检出能力 第5部分：非线性校准情形检出限的确定方法 |
China National Standards non |
English PDF |
| GB/T 36777-2018 |
Detection and identification of Xyleborus spp.(non-Chinese) 材小蠹(非中国种)检疫鉴定方法 |
China National Standards non |
English PDF |
| GB/T 36813-2018 |
Detection and identification of Batocera spp. (non-Chinese) 白条天牛(非中国种)检疫鉴定方法 |
China National Standards non |
English PDF |
| GB/T 12690.19-2018 |
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 19: Determination of arsenic and mercury contents 稀土金属及其氧化物中非稀土杂质化学分析方法 第19部分：砷、汞量的测定 |
China National Standards non |
English PDF |
| GB/T 4937.30-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing 半导体器件 机械和气候试验方法 第30部分：非密封表面安装器件在可靠性试验前的预处理 |
China National Standards non |
English PDF |
| GB/T 34953.2-2018 |
Information technology－Security techniques—Anonymous entity authentication－Part 2: Mechanisms based on signatures using a group public key 信息技术 安全技术 匿名实体鉴别 第2部分：基于群组公钥签名的机制 |
China National Standards non |
English PDF |
| GB/T 36439-2018 |
non-destructive testing—Certification and qualification of aerospace NDT personnel 无损检测 航空无损检测人员资格鉴定与认证 |
China National Standards non |
English PDF |
| GB/T 35965.2-2018 |
Protocol for emergency informatinon exchange—Part 2: Emergency event information 应急信息交互协议 第2部分：事件信息 |
China National Standards non |
English PDF |
| GB/T 24218.15-2018 |
Textiles—Test methods for nonwovens—Part 15: Determination of air permeability 纺织品 非织造布试验方法 第15部分：透气性的测定 |
China National Standards non |
English PDF |
| GB/T 35839-2018 |
non-destructive testing—Test method for measuring industrial computed tomography (CT) density 无损检测 工业计算机层析成像（CT）密度测量方法 |
China National Standards non |
English PDF |
| GB/T 35840.1-2018 |
Steels for plastic mould—Part 1：non-alloy steels 塑料模具钢 第1部分：非合金钢 |
China National Standards non |
English PDF |
| GB/T 36071-2018 |
non-destructive testing instruments—technical requirements of X-ray real-time imaging system 无损检测仪器 X射线实时成像系统检测仪技术要求 |
China National Standards non |
English PDF |
| GB/T 5293-2018 |
Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels 埋弧焊用非合金钢及细晶粒钢实心焊丝、药芯焊丝和焊丝-焊剂组合分类要求 |
China National Standards non |
English PDF |
| GB/T 35003-2018 |
Test methods for endurance and data retention of non-volatile memory 非易失性存储器耐久和数据保持试验方法 |
China National Standards non |
English PDF |
| GB/T 36015-2018 |
non-destructive testing instruments—Performance and testintg rules of industrial digital X-ray imaging system 无损检测仪器 工业X射线数字成像装置性能和检测规则 |
China National Standards non |
English PDF |
| GB/T 36017-2018 |
non-destructive testing instruments—X-ray fluorescence analysis tube 无损检测仪器 X射线荧光分析管 |
China National Standards non |
English PDF |
| GB/T 34898-2017 |
Micro electromechanical system technology—Test method for the nonlinear vibration of the MEMS resonant sensitive element 微机电系统（MEMS）技术 MEMS谐振敏感元件非线性振动测试方法 |
China National Standards non |
English PDF |
| GB/T 25608-2017 |
Earth-moving machinery—Performance requirements for non-metallic fuel tanks 土方机械 非金属燃油箱的性能要求 |
China National Standards non |
English PDF |
| GB/T 34886-2017 |
non-destructive testing—Test method for laser shearography of composite materials 无损检测 复合材料激光错位散斑检测方法 |
China National Standards non |
English PDF |
| GB/T 34885-2017 |
non-destructive testing—Electromagnetic ultrasonic testing—General principles 无损检测 电磁超声检测 总则 |
China National Standards non |
English PDF |
| GB/T 20058-2017 |
Rolling bearings－Single-row angular contact ball bearings－Chamfer dimensions for outer ring non-thrust side 滚动轴承 单列角接触球轴承 外圈非推力端倒角尺寸 |
China National Standards non |
English PDF |
| GB/T 34953.1-2017 |
Information technology—Security techniques—Anonymous entity authentication—Part 1: General 信息技术 安全技术 匿名实体鉴别 第1部分：总则 |
China National Standards non |
English PDF |
| GB/T 34892-2017 |
non-destructive testing—Test method for robotic ultrasonic testing 无损检测 机械手超声检测方法 |
China National Standards non |
English PDF |
| GB/T 15412-2017 |
General specification of pan/tilt head for non-broadcast TV camera 应用电视摄像机云台通用规范 |
China National Standards non |
English PDF |
| GB/T 16697-2017 |
General technical requirement and measurement method for non-broadcast camera of single sensor 单传感器应用电视摄像机通用技术要求及测量方法 |
China National Standards non |
English PDF |
| GB/T 34819-2017 |
Cosmetic ingredients—Methylisothiazolinone 化妆品用原料 甲基异噻唑啉酮 |
China National Standards non |
English PDF |
| GB/T 34517-2017 |
Evaluating method for spacecraft nonmetal materials outgassing in vacuum 航天器用非金属材料真空出气评价方法 |
China National Standards non |
English PDF |
| GB/T 21140-2017 |
non-structural finger jointed lumber 非结构用指接材 |
China National Standards non |
English PDF |
| GB/T 12690.5-2017 |
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 5: Determination of cobalt,manganese,lead,nickel,copper,zinc,aluminum,chromium,magnesium,cadmium,vanadium and iron contents 稀土金属及其氧化物中非稀土杂质化学分析方法 第5部分：钴、锰、铅、镍、铜、锌、铝、铬、镁、镉、钒、铁量的测定 |
China National Standards non |
English PDF |
| GB/T 34484.1-2017 |
Heat-treatable steels—Part 1: non-alloy steels 热处理钢 第1部分：非合金钢 |
China National Standards non |
English PDF |
| GB/T 21451.3-2017 |
Petroleum and liquid petroleum products—Measurement of level and temperture in storage tanks by automatic methods—Part 3:Measurement of level in pressurized tanks(non-refrigerated) 石油和液体石油产品 储罐中液位和温度自动测量法 第3部分：带压罐（非冷冻）中的液位测量 |
China National Standards non |
English PDF |
| GB/T 21451.6-2017 |
Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated) 石油和液体石油产品 储罐中液位和温度自动测量法 第6部分：带压罐（非冷冻）中的温度测量 |
China National Standards non |
English PDF |
| GB/T 12690.18-2017 |
Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides— Part 18: Determination of zirconium content 稀土金属及其氧化物中非稀土杂质化学分析方法 第18部分：锆量的测定 |
China National Standards non |
English PDF |
| GB/T 12690.6-2017 |
Chemical analysis methods for non-rare earth impurity of rare earth metals and their oxides—Part 6: Determination of iron content—Kslium thiocyanate, 1,10-Phenanthroline spectrophotometric method 稀土金属及其氧化物中非稀土杂质化学分析方法 第6部分：铁量的测定 硫氰酸钾、1,10-二氮杂菲分光光度法 |
China National Standards non |
English PDF |
| GB/T 34361-2017 |
non-destructive testing—Test method for frequency scanning eddy current testing 无损检测 扫频涡流检测方法 |
China National Standards non |
English PDF |
| GB/T 34404-2017 |
General specifications for non-dangerous liquid chemical products reverse logistics service 非危液态化工产品逆向物流通用服务规范 |
China National Standards non |
English PDF |
| GB/T 34403-2017 |
Specification for emergency handling of non-dangerous liquid chemical products logistics 非危液态化工产品物流突发事件处理 |
China National Standards non |
English PDF |
| GB/T 34628-2017 |
non-destructive testing of welds—General rules for metallic materials 焊缝无损检测 金属材料应用通则 |
China National Standards non |
English PDF |
| GB/T 7704-2017 |
non-destructive testing—Practice for residual stress measurement by X-ray 无损检测 Ｘ射线应力测定方法 |
China National Standards non |
English PDF |
| GB/T 34357-2017 |
non-destructive testing—Terminology—Terms used in magnetic flux leakage testing 无损检测 术语 漏磁检测 |
China National Standards non |
English PDF |
| GB/T 34362-2017 |
non-destructive testing—Guide for eddy current testing using conformable sensor arrays 无损检测 适形阵列涡流检测导则 |
China National Standards non |
English PDF |
| GB/T 34363-2017 |
non-destructive testing—Test method for fabricating and checking aluminum alloy ultrasonic standard reference blocks 无损检测 铝合金超声标准试块制作和校验方法 |
China National Standards non |
English PDF |
| GB/T 34370.1-2017 |
nondestructive testing of amusement equipments—Part 1：General requirement 游乐设施无损检测 第1部分：总则 |
China National Standards non |
English PDF |
| GB/T 34370.5-2017 |
nondestructive testing of amusement equipments—Part 5：Ultrasonic testing 游乐设施无损检测 第5部分：超声检测 |
China National Standards non |
English PDF |
| GB/T 34370.6-2017 |
nondestructive testing of amusement equipments—Part 6：Radiographic testing 游乐设施无损检测 第6部分：射线检测 |
China National Standards non |
English PDF |
| GB/T 34370.2-2017 |
nondestructive testing of amusement equipments－Part 2:Visual examination 游乐设施无损检测 第2部分：目视检测 |
China National Standards non |
English PDF |
| GB/T 34370.4-2017 |
nondestructive testing of amusement equipments—Part 4：Penetrant testing 游乐设施无损检测 第4部分：渗透检测 |
China National Standards non |
English PDF |
| GB/T 34370.3-2017 |
nondestructive testing of amusement equipments—Part 3：Magnetic particle testing 游乐设施无损检测 第3部分：磁粉检测 |
China National Standards non |
English PDF |
| GB/T 34365-2017 |
non-destructive testing—Terminology—Terms used in industrial computed tomography testing 无损检测 术语 工业计算机层析成像(CT)检测 |
China National Standards non |
English PDF |
| GB/T 34641-2017 |
non-destructive testing—Test method for determining image quality in direct thermal neutron radiographic examination 无损检测 直接热中子照相检测的像质测定方法 |
China National Standards non |
English PDF |
| GB/T 34626.2-2017 |
Metallic and other inorganic coatings—Cleaning and preparation of metal surfaces—Part 2: non-ferrous metals and alloys 金属及其他无机覆盖层 金属表面的清洗和准备 第2部分：有色金属及其合金 |
China National Standards non |
English PDF |
| GB/T 34638-2017 |
non-destructive testing—Test methods for ultrasonic leak detection 无损检测 超声泄漏检测方法 |
China National Standards non |
English PDF |
| GB/T 34637-2017 |
non-destructive testing—Test methods for bubble leak detection 无损检测 气泡泄漏检测方法 |
China National Standards non |
English PDF |
| GB/T 34215-2017 |
Cold-rolled non-oriented electrical steel strip（sheet）for electric vehicle driving motor 电动汽车驱动电机用冷轧无取向电工钢带（片） |
China National Standards non |
English PDF |
| GB/T 34295-2017 |
Meteorological condition grades of non-professional carbon monoxide poisoning 非职业性一氧化碳中毒气象条件等级 |
China National Standards non |
English PDF |
| GB/T 17514-2017 |
Water treatment chemicals—Anionic and non-ionic polyacrylamides 水处理剂 阴离子和非离子型聚丙烯酰胺 |
China National Standards non |
English PDF |
| GB/T 17727-2017 |
nonmetal material gaskets for marine flange 船用法兰非金属垫片 |
China National Standards non |
English PDF |
| GB/T 33886-2017 |
non-destructive testing instruments—Industrial electronic endoscopic detector 无损检测仪器 工业电子内窥镜检测仪 |
China National Standards non |
English PDF |
| GB/T 33887-2017 |
non-destructive testing instruments—Industrial optical fiber endoscope detector 无损检测仪器 工业光纤内窥镜检测仪 |
China National Standards non |
English PDF |
| GB/T 33889-2017 |
nondestructive testing instrument—Specification for eddy current-magnetic flux leakage integrated instrument 无损检测仪器 涡流-漏磁综合检测仪技术规则 |
China National Standards non |
English PDF |
| GB/T 33888-2017 |
non-destructive testing instruments—Characterization and verification of ultrasonic thickness measuring equipment 无损检测仪器 超声测厚仪特性与验证 |
China National Standards non |
English PDF |
| GB/T 33877-2017 |
non-destructive testing—Test method for comparing the brightness of fluorescent penetrants 无损检测 荧光渗透剂亮度测定方法 |
China National Standards non |
English PDF |
| GB/T 34018-2017 |
non-destructive testing—Test method for scanning ultrasonic microscopy 无损检测 超声显微检测方法 |
China National Standards non |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
