Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 5686.9-2023 |
Ferromanganese, manganese-silicon alloy, ferromanganese nitride and metallic manganese. Determination of manganese, silicon, phosphorus and iron content. Wavelength dispersive X-ray fluorescence spectrometry (cast glass plate method) {译} 锰铁、锰硅合金、氮化锰铁和金属锰 锰、硅、磷和铁含量的测定 波长色散X射线荧光光谱法(熔铸玻璃片法) |
China National Standards plate |
 English PDF |
| GB/T 32182-2023 |
Aluminum and aluminum alloy plates for rail transit {译} 轨道交通用铝及铝合金板材 |
China National Standards plate |
English PDF |
| GB/T 2054-2023 |
Nickel and nickel alloy plates {译} 镍及镍合金板 |
China National Standards plate |
English PDF |
| GB/T 5313-2023 |
Thickness direction performance steel plate {译} 厚度方向性能钢板 |
China National Standards plate |
English PDF |
| GB/T 43109-2023 |
Stainless steel composite steel plates for shipbuilding and offshore engineering {译} 船舶及海洋工程用不锈钢复合钢板 |
China National Standards plate |
English PDF |
| GB/T 42991-2023 |
Protection Guide for Emergency Rescue Teams in Rapid plateau Disasters {译} 急进高原灾害应急救援队伍防护指南 |
China National Standards plate |
English PDF |
| GB/T 3880.1-2023 |
Aluminum and aluminum alloy plates and strips for general industrial use Part 1: General requirements {译} 一般工业用铝及铝合金板、带材 第1部分：一般要求 |
China National Standards plate |
English PDF |
| GB/T 33368-2023 |
High-strength and damage-resistant Al-Cu-Mg aluminum alloy plates and strips {译} 高强耐损伤型Al-Cu-Mg系铝合金板、带材 |
China National Standards plate |
English PDF |
| GB/T 3279-2023 |
Spring steel hot rolled steel plates and strips {译} 弹簧钢热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 3278-2023 |
Hot rolled steel plates and strips for tools {译} 工具用热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 28712.2-2023 |
Heat exchanger types and basic parameters Part 2: Fixed tube plate heat exchanger {译} 热交换器型式与基本参数 第2部分：固定管板式热交换器 |
China National Standards plate |
English PDF |
| GB/T 19879-2023 |
Steel plates for building structures {译} 建筑结构用钢板 |
China National Standards plate |
English PDF |
| GB/T 28712.5-2023 |
Heat exchanger types and basic parameters Part 5: Spiral plate heat exchanger {译} 热交换器型式与基本参数 第5部分：螺旋板式热交换器 |
China National Standards plate |
English PDF |
| GB/T 26038-2023 |
Tungsten-based high specific gravity alloy plate {译} 钨基高比重合金板材 |
China National Standards plate |
English PDF |
| GB/T 42795-2023 |
High strain steel plate for offshore oil and gas pipelines {译} 高应变海洋油气输送管用钢板 |
China National Standards plate |
English PDF |
| GB/T 42662-2023 |
Non-destructive testing of steel pipes Automatic ultrasonic detection of delamination defects in steel strips/plates for welded steel pipes {译} 钢管无损检测 焊接钢管用钢带/钢板分层缺欠的自动超声检测 |
China National Standards plate |
English PDF |
| GB/T 28415-2023 |
Steel plates and strips for fire-resistant structures {译} 耐火结构用钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 20564.14-2023 |
High-strength cold-rolled steel plates and strips for automobiles Part 14: Low-density steel {译} 汽车用高强度冷连轧钢板及钢带 第14部分：低密度钢 |
China National Standards plate |
English PDF |
| GB/T 20564.13-2023 |
High-strength cold-rolled steel plates and strips for automobiles Part 13: Medium manganese steel {译} 汽车用高强度冷连轧钢板及钢带 第13部分：中锰钢 |
China National Standards plate |
English PDF |
| GB/T 713.7-2023 |
Steel plates and strips for pressure equipment Part 7: Stainless steel and heat-resistant steel {译} 承压设备用钢板和钢带 第7部分：不锈钢和耐热钢 |
China National Standards plate |
English PDF |
| GB/T 713.6-2023 |
Steel plates and strips for pressure-bearing equipment Part 6: Quenched and tempered high-strength steels {译} 承压设备用钢板和钢带 第6部分：调质高强度钢 |
China National Standards plate |
English PDF |
| GB/T 713.5-2023 |
Steel plates and strips for pressure equipment Part 5: High manganese steels with specified low temperature properties {译} 承压设备用钢板和钢带 第5部分：规定低温性能的高锰钢 |
China National Standards plate |
English PDF |
| GB/T 713.4-2023 |
Steel plates and strips for pressure equipment Part 4: Nickel alloy steels with specified low temperature properties {译} 承压设备用钢板和钢带 第4部分：规定低温性能的镍合金钢 |
China National Standards plate |
English PDF |
| GB/T 713.3-2023 |
Steel plates and strips for pressure equipment Part 3: Low alloy steels with specified low temperature properties {译} 承压设备用钢板和钢带 第3部分：规定低温性能的低合金钢 |
China National Standards plate |
English PDF |
| GB/T 713.2-2023 |
Steel plates and strips for pressure equipment Part 2: Non-alloy and alloy steels with specified temperature properties {译} 承压设备用钢板和钢带 第2部分：规定温度性能的非合金钢和合金钢 |
China National Standards plate |
English PDF |
| GB/T 713.1-2023 |
Steel plates and strips for pressure equipment Part 1: General requirements {译} 承压设备用钢板和钢带 第1部分：一般要求 |
China National Standards plate |
English PDF |
| GB/T 15759-2023 |
Human body template design and usage requirements {译} 人体模板设计和使用要求 |
China National Standards plate |
English PDF |
| GB 15741-1995 |
Vehicle and Trailer License plate (Frame) and its Position "No. 1 Amendment" {译} 汽车和挂车号牌板(架)及其位置《第1号修改单》 |
China National Standards plate |
English PDF |
| GB/T 42558.1-2023 |
Anti-seismic technology for electrical equipment of converter stations used on plateaus Part 1: Guidelines for anti-seismic tests and evaluations {译} 高原用换流站电气设备抗震技术 第1部分：抗震试验及评价导则 |
China National Standards plate |
English PDF |
| GB/T 29466-2023 |
plate heat exchanger unit {译} 板式热交换器机组 |
China National Standards plate |
English PDF |
| GB/T 41754-2023 |
Duplex stainless steel plate for nuclear power plant {译} 核电站用双相不锈钢钢板 |
China National Standards plate |
English PDF |
| GB/T 15110.2-2023 |
Registration systems for photosensitive materials, foils and papers - Part 2: Pin registration systems for plate making {译} 感光材料、箔纸及纸张的套准系统 第2部分：制版的销式定位系统 |
China National Standards plate |
English PDF |
| GB/T 42355.2-2023 |
Anchorage plate reinforcement for reinforced concrete - Part 2: Test methods {译} 钢筋混凝土用锚固板钢筋 第2部分：试验方法 |
China National Standards plate |
English PDF |
| GB/T 42355.1-2023 |
Anchorage plate reinforcement for reinforced concrete - Part 1: Specifications {译} 钢筋混凝土用锚固板钢筋 第1部分：技术条件 |
China National Standards plate |
English PDF |
| GB/T 24721.5-2023 |
Glass fiber reinforced plastic products for road use - Part 5: Base plates for markings {译} 公路用玻璃纤维增强塑料产品 第5部分：标志底板 |
China National Standards plate |
English PDF |
| GB 11614-2022 |
plate glass {译} 平板玻璃 |
China National Standards plate |
English PDF |
| GB/T 41492-2022 |
Rubber spring vibration isolator for floating plate of Urban Rail Transit {译} 城市轨道交通浮置板用橡胶弹簧隔振器 |
China National Standards plate |
English PDF |
| GB/T 41490-2022 |
Test method for rolling contact fatigue of silicon nitride ceramics at room temperature ball plate method {译} 氮化硅陶瓷 室温下滚动接触疲劳试验方法 球板法 |
China National Standards plate |
English PDF |
| GB/T 21355-2022 |
Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—Classification of systems 无损检测 基于存储磷光成像板的工业计算机射线照相检测 系统分类 |
China National Standards plate |
English PDF |
| GB/T 26642-2022 |
Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of metallic materials using X-rays and gamma rays 无损检测 基于存储磷光成像板的工业计算机射线照相检测 金属材料X射线和伽玛射线检测总则 |
China National Standards plate |
English PDF |
| GB/T 23520-2022 |
Platinum clad anode sheet and plate for cathodic protection 阴极保护用铂复合阳极板 |
China National Standards plate |
English PDF |
| GB/T 17155-2022 |
Offset printing plate size {译} 胶印印版 尺寸 |
China National Standards plate |
English PDF |
| GB/T 42098-2022 |
Thin Self-Locking Nuts with Lug plates for Aerospace {译} 航空航天用单耳托板薄自锁螺母 |
China National Standards plate |
English PDF |
| GB/T 42094-2022 |
Swimming self-locking nuts for aerospace with MJ thread double lug support plate with countersunk head socket {译} 航空航天用带沉头窝的MJ螺纹双耳托板游动自锁螺母 |
China National Standards plate |
English PDF |
| GB/T 42230-2022 |
Requirements for binding and fixing steel plate coils for road transport {译} 钢板卷道路运输捆绑固定要求 |
China National Standards plate |
English PDF |
| GB/T 41899-2022 |
General rules for the quality of coated tin-plated or chrome-plated steel sheets for food containers {译} 食品容器用涂覆镀锡或镀铬薄钢板质量通则 |
China National Standards plate |
English PDF |
| GB/T 3621-2022 |
Titanium and titanium alloy plates {译} 钛及钛合金板材 |
China National Standards plate |
English PDF |
| GB/T 24186-2022 |
High-strength wear-resistant steel plates and strips for construction machinery {译} 工程机械用高强度耐磨钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 28905-2022 |
Low Yield Strength Steel plates for Construction {译} 建筑用低屈服强度钢板 |
China National Standards plate |
English PDF |
| GB/T 42006-2022 |
plateau Photovoltaic Power Generation Equipment Inspection Specifications {译} 高原光伏发电设备检验规范 |
China National Standards plate |
English PDF |
| GB/T 11693-2022 |
Marine flange welding seat plate {译} 船用法兰焊接座板 |
China National Standards plate |
English PDF |
| GB/T 17934.4-2022 |
Printing technology - Process control of halftone color separation plates, proofs and production prints - Part 4: Publishing gravure printing {译} 印刷技术 网目调分色版、样张和生产印刷品的加工过程控制 第4部分：出版凹印 |
China National Standards plate |
English PDF |
| GB/T 40381-2021 |
Specification of sapphire plate for laser window 激光窗口用蓝宝石晶体板状材料规范 |
China National Standards plate |
English PDF |
| GB/T 40424-2021 |
Welding procedure qualification test for tubes to tube-plate joints 管与管板的焊接工艺评定试验 |
China National Standards plate |
English PDF |
| GB/T 40321-2021 |
High strength and toughness Al-Zn-Mg-Cu series aluminium alloy plate 高强高韧型Al-Zn-Mg-Cu系铝合金板材 |
China National Standards plate |
English PDF |
| GB/T 28907-2021 |
Sulfuric acid dew-point corrosion resistance steel plate and strip 耐硫酸露点腐蚀钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 40101-2021 |
Ultrasonic testing method for stainless steel bars,plates and forgings of PWR nuclear fuel assembly and associated assembly 压水堆核燃料组件和相关组件用不锈钢棒、板、锻件超声波检测方法 |
China National Standards plate |
English PDF |
| GB/T 39985-2021 |
Titanium-nickel shape memory alloy plate 钛镍形状记忆合金板材 |
China National Standards plate |
English PDF |
| GB/T 40169-2021 |
Compression-moulded plates of ultra-high-molecular-weight polyethylene(PE-UHMW)and high density polyethylene (PE-HD) 超高分子量聚乙烯（PE-UHMW）和高密度聚乙烯（PE-HD）模塑板材 |
China National Standards plate |
English PDF |
| GB/T 39861-2021 |
Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life 锰酸锂电化学性能测试 放电平台容量比率及循环寿命测试方法 |
China National Standards plate |
English PDF |
| GB/T 20645-2021 |
Specific environmental condition—Technical requirements of low-voltage apparatuses for plateau 特殊环境条件 高原用低压电器技术要求 |
China National Standards plate |
English PDF |
| GB/T 6424-2021 |
Flat plate solar collectors 平板型太阳能集热器 |
China National Standards plate |
English PDF |
| GB/T 20969.5-2021 |
Special environmental condition—Machinery for plateau—Part 5:Guide rule of test for plateau natural environment—Construction machinery 特殊环境条件 高原机械 第5部分：高原自然环境试验导则 工程机械 |
China National Standards plate |
English PDF |
| GB/T 20969.4-2021 |
Special environmental condition—Machinery for plateau—Part 4:Guide rule of test for plateau natural environment—Internal combustion engines 特殊环境条件 高原机械 第4部分：高原自然环境试验导则 内燃动力机械 |
China National Standards plate |
English PDF |
| GB/T 20969.2-2021 |
Special environmental condition—Machinery for plateau—Part 2:Requirement for construction machinery on plateau 特殊环境条件 高原机械 第2部分：高原对工程机械的要求 |
China National Standards plate |
English PDF |
| GB/T 20969.1-2021 |
Special environmental condition—Machinery for plateau—Part 1: Requirements for internal combustion engines on plateau 特殊环境条件 高原机械 第1部分：高原对内燃动力机械的要求 |
China National Standards plate |
English PDF |
| GB/T 40940-2021 |
Snowboard plate-bindings—Requirements and test methods 滑雪单板固定器 要求和试验方法 |
China National Standards plate |
English PDF |
| GB/T 23827-2021 |
Road traffic sign plate and support 道路交通标志板及支撑件 |
China National Standards plate |
English PDF |
| GB/T 39507-2020 |
Leather—Physical and mechanical tests—Determination of abrasion resistance：Martindale ball plate method 皮革 物理和机械试验 耐磨性能的测定：马丁代尔球盘法 |
China National Standards plate |
English PDF |
| GB/T 38988-2020 |
Damage-tolerant grade titanium alloy plate 损伤容限型钛合金板材 |
China National Standards plate |
English PDF |
| GB/T 38916-2020 |
High temperature titanium alloy plate and sheet for aerospace 航空航天用高温钛合金板材 |
China National Standards plate |
English PDF |
| GB/T 29503-2020 |
Aluminium alloy stretched plates 铝合金预拉伸板 |
China National Standards plate |
English PDF |
| GB/T 38875-2020 |
Reduced activation martensitic steel plates with heat-resistance and corrosion-resistance for nuclear facilities 核电用耐高温抗腐蚀低活化马氏体结构钢板 |
China National Standards plate |
English PDF |
| GB/T 22641-2020 |
Wrought aluminium alloy sheets and plates for ships 船用铝合金板材 |
China National Standards plate |
English PDF |
| GB/T 38713-2020 |
Medium manganese steel plate for offshore platform structure 海洋平台结构用中锰钢钢板 |
China National Standards plate |
English PDF |
| GB/T 38688-2020 |
Corrosion-resistant alloy of hot rolled plates 耐蚀合金热轧厚板 |
China National Standards plate |
English PDF |
| GB/T 38473-2020 |
Textiles－Determination of drying rate in dynamic state (sweating guarded-hotplate test) 纺织品 动态条件下干燥速率的测定（蒸发热板法） |
China FZ - Textile Industry Standards plate |
English PDF |
| GB/T 35840.4-2020 |
Steels for plastic mould—Part 4: Pre-hardenging steel plate 塑料模具钢 第4部分：预硬化钢板 |
China National Standards plate |
English PDF |
| GB/T 11251-2020 |
Alloy structural steel plate and strip 合金结构钢钢板及钢带 |
China National Standards plate |
English PDF |
| GB/T 39260.2-2020 |
Use case methodology—Part 2：Definition of the templates for use cases,actor list and requirements list 用例方法 第2部分：用例模板、参与方清单和需求清单的定义 |
China National Standards plate |
English PDF |
| GB/T 21296.4-2020 |
Automatic instruments for weighing road vehicles in motion─Part 4：Bending plate type 动态公路车辆自动衡器 第4部分：弯板式 |
China National Standards plate |
English PDF |
| GB/T 39163-2020 |
Test methods of the bonding strength for target-backing plate assemblies 靶材与背板结合强度测试方法 |
China National Standards plate |
English PDF |
| GB/T 38277-2019 |
Brittle crack arrest high strength steel plate for ship 船用高强度止裂钢板 |
China National Standards plate |
English PDF |
| GB/T 38277-2019 |
Brittle crack arrest high strength steel plate for ship 船用高强度止裂钢板 |
China National Standards plate |
English PDF |
| GB/T 37951-2019 |
Test methods for microchannel plate 微通道板试验方法 |
China National Standards plate |
English PDF |
| GB/T 37897-2019 |
Fibre-reinforced plastic composites—Determination of the in-plane shear modulus by the plate twist method 纤维增强塑料复合材料 平板扭曲法测定面内剪切模量 |
China National Standards plate |
English PDF |
| GB/T 37836-2019 |
Air filter plate made by polylactic acid/polybutylene succinate composite 聚乳酸/聚丁二酸丁二酯复合材料空气过滤板 |
China National Standards plate |
English PDF |
| GB/T 37800-2019 |
Hot rolled longitudinally profiled steel plate 热轧纵向变厚度钢板 |
China National Standards plate |
English PDF |
| GB/T 37599-2019 |
Wide and heavy steel plate for sour service petroleum and natural gas pipe lines 石油天然气输送管用抗酸性宽厚钢板 |
China National Standards plate |
English PDF |
| GB/T 37568-2019 |
Tin-plated copper and copper alloy strip 铜及铜合金镀锡带材 |
China National Standards plate |
English PDF |
| GB/T 25832-2019 |
Hot rolled steel plate and strip for porcelain enameling 搪瓷用热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 8547-2019 |
Titanium clad steel plate 钛-钢复合板 |
China National Standards plate |
English PDF |
| GB/T 709-2019 |
Dimension,shape,weight and tolerance for hot-rolled steel strip,plate and sheet 热轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards plate |
English PDF |
| GB/T 37171-2018 |
Specification and test methods for bronze plate containing diamond-shaped solid lubricant 含有菱形固体润滑剂的青铜板材技术要求和检验方法 |
China National Standards plate |
English PDF |
| GB/T 37137-2018 |
On-site inspections method of a.c.circuit systems for 220 kV substations on plateau 高原220kV变电站交流回路系统现场检验方法 |
China National Standards plate |
English PDF |
| GB/T 20626.2-2018 |
Specific environmental condition—Electrical and electronic products for plateau—Part 2: Selective types and testing specification 特殊环境条件-高原电工电子产品-第2部分：选型和检验规范 |
China National Standards plate |
English PDF |
| GB/T 51340-2018 |
Technical standard for steel plate concrete structure of nuclear power plant 核电站钢板混凝土结构技术标准 |
China National Standards plate |
English PDF |
| GB/T 37207-2018 |
Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life 镍钴锰酸锂电化学性能测试-放电平台容量比率及循环寿命测试方法 |
China National Standards plate |
English PDF |
| GB/T 25978-2018 |
Road vehicl—plates and label 道路车辆 标牌和标签 |
China National Standards plate |
English PDF |
| GB/T 35012-2018 |
Chromium molybdenum alloy steel plate for hydrogen service equipment 临氢设备用铬钼合金钢钢板 |
China National Standards plate |
English PDF |
| GB/T 36269-2018 |
Determination of trace nickel for plate glass 平板玻璃中微量镍的测定方法 |
China National Standards plate |
English PDF |
| GB/T 36163-2018 |
Alloy steel plate for nuclear power plants 核电站用合金钢钢板 |
China National Standards plate |
English PDF |
| GB/T 21237-2018 |
Wide and heavy plates for line pipe of petroleum and natural gas 石油天然气输送管用宽厚钢板 |
China National Standards plate |
English PDF |
| GB/T 36130-2018 |
Hot rolled steel plate，sheet and strip for tower structural purpose 铁塔结构用热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 36171-2018 |
High strength structural steel plate in the quenched and tempered condition with improved formability 改善成形性高强度结构用调质钢板 |
China National Standards plate |
English PDF |
| GB/T 36525-2018 |
Tools for pressing—Cam driver plates 冲模 斜楔板 |
China National Standards plate |
English PDF |
| GB/T 18411-2018 |
Power-driven vehicles manufacturer’s plate 机动车产品标牌 |
China National Standards plate |
English PDF |
| GB/T 36667-2018 |
Ships and marine technology—Ship’s mooring and towing fittings—Recessed bitts(steel plate type) 船舶和海上技术 船舶系泊和拖带设备 舷内带缆桩(钢板型) |
China National Standards plate |
English PDF |
| GB/T 36586.1-2018 |
Tools for pressing—Wear plates—Part 1: Type A 冲模 耐磨板 第1部分：A型 |
China National Standards plate |
English PDF |
| GB/T 36586.2-2018 |
Tools for pressing—Wear plates—Part 2: Type B 冲模 耐磨板 第2部分：B型 |
China National Standards plate |
English PDF |
| GB/T 4678.13-2018 |
Die casting dies—Components—Part 13: Ejector plate washers 压铸模 零件 第13部分：推板垫圈 |
China National Standards plate |
English PDF |
| GB/T 36487-2018 |
Printing machinery—Digital flexo direct plate setter 印刷机械 柔性版数字直接制版机 |
China National Standards plate |
English PDF |
| GB/T 35859-2018 |
Determination of ethylene glycol monoethyl ether insoluble contents in polymer materials for offset printing plates—Filtering method 胶印版材用高聚物中乙二醇单乙醚不溶物含量的测定 过滤法 |
China National Standards plate |
English PDF |
| GB/T 11048-2018 |
Textiles－Physiological effects－Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test) 纺织品 生理舒适性 稳态条件下热阻和湿阻的测定(蒸发热板法) |
China National Standards plate |
English PDF |
| GB/T 36003-2018 |
Food can made of tinplate or electrolytic chromium-coated steel(ECCS) 镀锡或镀铬薄钢板罐头空罐 |
China National Standards plate |
English PDF |
| GB/T 35841-2018 |
High strength steel plate for dump truck structure 自卸矿车结构用高强度钢板 |
China National Standards plate |
English PDF |
| GB/T 36138-2018 |
Flat-plate microfiltration membrane of polytetrafluoroethylene for sterilizing 除菌用聚四氟乙烯平板式微滤膜 |
China National Standards plate |
English PDF |
| GB/T 34690.7-2017 |
Graphic technology—Digitalized process control for offset printing—Part 7: Computer to plate 印刷技术 胶印数字化过程控制 第7部分：计算机直接制版 |
China National Standards plate |
English PDF |
| GB/T 34925-2017 |
On-site inspections method of a.c. circuit systems for 110 kV substations on plateau 高原110 kV变电站交流回路系统现场检验方法 |
China National Standards plate |
English PDF |
| GB/T 34744-2017 |
Determination method of design values for dimension lumber and truss plate connection 规格材及齿板连接性能设计值确定方法 |
China National Standards plate |
English PDF |
| GB/T 34689-2017 |
Digital printing materials—Computer direct plate-making plate(CTP Plate)—Test of unit area mass of oxidation layer 数字印刷材料 计算机直接制版版材（CTP版） 氧化层单位面积质量的测定 |
China National Standards plate |
English PDF |
| GB/T 34478-2017 |
Determination of anti-slip coefficient at bolted connect steel plates’ surfaces 钢板栓接面抗滑移系数的测定 |
China National Standards plate |
English PDF |
| GB/T 34560.4-2017 |
Structural steels—Part 4：Technical delivery conditions for high yield strength quenched and tempered structural steel plates 结构钢 第4部分：淬火加回火高屈服强度结构钢板交货技术条件 |
China National Standards plate |
English PDF |
| GB/T 34375-2017 |
Reliability assessment method of NC ship plate bending machine 数控船用卷板机可靠性评定方法 |
China National Standards plate |
English PDF |
| GB/T 8546-2017 |
Titanium clad stainless steel plate 钛-不锈钢复合板 |
China National Standards plate |
English PDF |
| GB/T 3876-2017 |
Molybdenum and molybdenum alloy plate and sheet 钼及钼合金板材 |
China National Standards plate |
English PDF |
| GB/T 34389-2017 |
Stamping dies—Sliding plates 冲模 导滑板 |
China National Standards plate |
English PDF |
| GB/T 20626.1-2017 |
Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements 特殊环境条件 高原电工电子产品 第1部分：通用技术要求 |
China National Standards plate |
English PDF |
| GB/T 34374-2017 |
Stamping dies—L-shaped guide plates 冲模 L形导板 |
China National Standards plate |
English PDF |
| GB/T 4678.8-2017 |
Diecasting dies—Components—Part 8: Ejector plate 压铸模 零件 第8部分：推板 |
China National Standards plate |
English PDF |
| GB/T 4678.1-2017 |
Diecasting dies—Components—Part 1: Die plates 压铸模 零件 第1部分：模板 |
China National Standards plate |
English PDF |
| GB/T 34200-2017 |
Cold rolled stainless steel plate,sheet and strip for construction roof and curtain 建筑屋面和幕墙用冷轧不锈钢钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 34207-2017 |
Wide and heavy plates for offshore line pipe 海底管线用宽厚钢板 |
China National Standards plate |
English PDF |
| GB/T 2520-2017 |
Cold-reduced electrolytic tinplate 冷轧电镀锡钢板及钢带 |
China National Standards plate |
English PDF |
| GB/T 34151-2017 |
Stamping dies—Guide plates—U-and V-blocks 冲模 导板 U形和V形块 |
China National Standards plate |
English PDF |
| GB/T 3462-2017 |
Bars and plate blanks of molybdenum 钼条和钼板坯 |
China National Standards plate |
English PDF |
| GB/T 33963-2017 |
Steel plates and sheets for truck carriage 载重汽车车厢厢体用钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 33880-2017 |
Wrought aluminium silicon alloy plates and sheets from hot isostatic pressing 热等静压铝硅合金板材 |
China National Standards plate |
English PDF |
| GB/T 33811-2017 |
Alloy tool and mould steel sheets and plates 合金工模具钢板 |
China National Standards plate |
English PDF |
| GB/T 33824-2017 |
Aluminum and Aluminum alloys plates, sheets and strips for cans and caps of new energy power batteries 新能源动力电池壳及盖用铝及铝合金板、带材 |
China National Standards plate |
English PDF |
| GB/T 23636-2017 |
plate for lead-acid battery 铅酸蓄电池用极板 |
China National Standards plate |
English PDF |
| GB/T 17454.3-2017 |
Safety of machinery—Pressure-sensitive protective devices—Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices 机械安全 压敏保护装置 第3部分：压敏缓冲器、压敏板、压敏线及类似装置的设计和试验通则 |
China National Standards plate |
English PDF |
| GB/T 33639-2017 |
CNC hydraulic punching and drilling composite machine for plates 数控液压冲钻复合机 |
China National Standards plate |
English PDF |
| GB/T 711-2017 |
Hot-rolled quality carbon structural steel plates sheets and strips 优质碳素结构钢热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 3274-2017 |
Hot-rolled plates、sheets and strips of carbon structural steels and high strength low alloy structural steels 碳素结构钢和低合金结构钢热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 24511-2017 |
Stainless steel and heat resisting steel plate, sheet and strip for pressure equipments 承压设备用不锈钢和耐热钢钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 6653-2017 |
Steel plates and strips for welded gas cylinders 焊接气瓶用钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 34915-2017 |
Austenitic stainless steel plate，sheet and strip for nuclear power plants 核电站用奥氏体不锈钢钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 24510-2017 |
Nickel alloy steel plates for low temperature pressure vessels 低温压力容器用镍合金钢板 |
China National Standards plate |
English PDF |
| GB/T 17280-2017 |
Standard test method for distillation of crude petroleum—15-theoretical plate column 原油蒸馏标准试验方法 15-理论塔板蒸馏柱 |
China National Standards plate |
English PDF |
| GB/Z 35140-2017 |
Measurement of fluid flow by means of pressure-differential devices—Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of GB/T 2624 用差压装置测量流体流量 GB/T 2624范围之外的孔板、喷嘴和文丘里管的使用指南 |
China National Standards plate |
English PDF |
| GB/T 35708-2017 |
Testing method of fault location system in plateau distribution network 高原型配电网故障定位系统检验方法 |
China National Standards plate |
English PDF |
| GB/T 35762-2017 |
Textiles—Test method for thermal transmittance—Flat plate test 纺织品 热传递性能试验方法 平板法 |
China National Standards plate |
English PDF |
| GB/T 35414-2017 |
Requirements of oxygen conditioning for indoor oxygen diffusion in plateau area 高原地区室内空间弥散供氧（氧调）要求 |
China National Standards plate |
English PDF |
| GB/T 33239-2016 |
Stainless steel plate,sheet and strip for rail vehicle 轨道车辆用不锈钢钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 33326-2016 |
Rubber strips used in flat-plate solar collectors 平板太阳能集热器用橡胶密封条 |
China National Standards plate |
English PDF |
| GB/T 33316-2016 |
Plastics—Phenolic resins—Determination of reactivity on a B-transformation test plate 塑料 酚醛树脂 在乙阶转变试板上反应活性的测定 |
China National Standards plate |
English PDF |
| GB/T 33166-2016 |
Hot-rolled steel plate,sheet and strip for automobile axle housings 汽车桥壳用热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 33061.10-2016 |
Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer 塑料 动态力学性能的测定 第10部分：使用平行平板振荡流变仪测定复数剪切黏度 |
China National Standards plate |
English PDF |
| GB/T 32955-2016 |
Stainless steel plate，sheet and strip for container 集装箱用不锈钢钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 32688-2016 |
Plastics—Phenloic resin powder—Determination of flow distance on a heated glass plate 塑料 酚醛树脂 在加热玻璃板上流动距离的测定 |
China National Standards plate |
English PDF |
| GB/T 32570-2016 |
steel plates and strips for freight containers 集装箱用钢板及钢带 |
China National Standards plate |
English PDF |
| GB/T 32531-2016 |
Printing machinery—Violet laster digital direct plate setter 印刷机械 紫激光型数字直接制版机 |
China National Standards plate |
English PDF |
| GB/T 2970-2016 |
Method for ultrasonic testing of thicker steel plates 厚钢板超声检测方法 |
China National Standards plate |
English PDF |
| GB/T 32468-2015 |
Copper clad aluminum plate, sheets and strips 铜铝复合板带 |
China National Standards plate |
English PDF |
| GB/T 32352-2015 |
Standard of acceptance for wind turbine generator systems used on plateau 高原用风力发电机组现场验收规范 |
China National Standards plate |
English PDF |
| GB/T 32269-2015 |
Nanotechnologies—Terminology and definitions for nano-objects—Nanoparticle, nanofibre and nanoplate 纳米科技 纳米物体的术语和定义 纳米颗粒、纳米纤维和纳米片 |
China National Standards plate |
English PDF |
| GB/T 7734-2015 |
Method for ultrasonic testing of clad steel plates 复合钢板超声检测方法 |
China National Standards plate |
English PDF |
| GB/T 32183-2015 |
Aluminium strips for computer-to-printing plates 计算机直接排版印刷版基用铝带材 |
China National Standards plate |
English PDF |
| GB/T 32182-2015 |
Aluminium and aluminium alloy plates and sheets for railway application 轨道交通用铝及铝合金板材 |
China National Standards plate |
English PDF |
| GB/T 19879-2015 |
Steel plates for building structure 建筑结构用钢板 |
China National Standards plate |
English PDF |
| GB/T 32273-2015 |
Building construction machinery and equipment—Pedestrian-controlled vibratory plates—Terminology and commercial specifications 建筑施工机械与设备 手扶随行式振动平板夯 术语和商业规格 |
China National Standards plate |
English PDF |
| GB/T 32184-2015 |
Extruded aluminum alloy flat bars and plates with high conductivity 高电导率铝合金挤压扁棒及板 |
China National Standards plate |
English PDF |
| GB/T 22270.4-2015 |
Industrial automation systems and integration—Service interface for testing applications—Part 4: Device capability profile template 工业自动化系统与集成 测试应用的服务接口 第4部分：设备能力专规模板 |
China National Standards plate |
English PDF |
| GB/T 32163.4-2015 |
Specification for eco-design product assessment—Part 4: Light inorganic plate 生态设计产品评价规范 第4部分：无机轻质板材 |
China National Standards plate |
English PDF |
| GB 18408-2015 |
photometric characteristics of devices for the illumination of rear registration plates of motor vehicles and their trailers 汽车及挂车后牌照板照明装置配光性能 |
China National Standards plate |
English PDF |
| GB/T 8651-2015 |
Metal plates—Flaw detection method by the ultrasonic plate wave 金属板材超声板波探伤方法 |
China National Standards plate |
English PDF |
| GB/T 4238-2015 |
Heat-resisting steel plate, sheet and strip 耐热钢钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 4237-2015 |
Hot rolled stainless steel plate, sheet and strip 不锈钢热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 3280-2015 |
Cold rolled stainless steel plate, sheet and strip 不锈钢冷轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 3273-2015 |
Hot-rolled steel plates and strips for automobile frames 汽车大梁用热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 31946-2015 |
Steel plates for steel penstock in hydropower station 水电站压力钢管用钢板 |
China National Standards plate |
English PDF |
| GB/T 31945-2015 |
Steel plate for self-elevating drilling units leg structure 自升式平台桩腿用钢板 |
China National Standards plate |
English PDF |
| GB/T 31944-2015 |
Corrosion resistant steel plates for cargo oil tanks 原油船货油舱用耐腐蚀钢板 |
China National Standards plate |
English PDF |
| GB/T 31939-2015 |
Hot-rolled steel plates (sheets) and strips for coal mine refuge chamber 矿用救生舱用热轧钢板和钢带 |
China National Standards plate |
English PDF |
| GB/T 31938-2015 |
Steel plate for coal slurry pipeline 煤浆输送管用钢板 |
China National Standards plate |
English PDF |
| GB/T 31932-2015 |
Method for electromagnetic automatic ultrasonic testing for thicker steel plates 厚钢板电磁超声自动检测方法 |
China National Standards plate |
English PDF |
| GB/T 31910-2015 |
Titanium alloy plates for submersible 潜水器用钛合金板材 |
China National Standards plate |
English PDF |
| GB/T 31584-2015 |
plate-type DeNOx catalysts 平板式烟气脱硝催化剂 |
China National Standards plate |
English PDF |
| GB/T 31565-2015 |
Vitreous ang porcelain enamels—Determination of the edge covering on enamelled steel plate to be used in heat exchangers 热交换器用钢板搪瓷边缘覆盖率的测定 |
China National Standards plate |
English PDF |
| GB/T 31529-2015 |
Digital printing materials—Computer direct plate-making plate（CTP Plate）—Test of unit area weight of photosensitive coating 数字印刷材料 计算机直接制版（CTP）版材 感光层单位面积质量的测定 |
China National Standards plate |
English PDF |
| GB/T 19131-2015 |
Tri-wheel vehicles and low-speed goods vehicles—License plates(crackets) and it`s position 三轮汽车和低速货车 号牌板(架)及其位置 |
China National Standards plate |
English PDF |
| GB/T 31395-2015 |
Faceplate lathes—Specifications 落地车床 技术条件 |
China National Standards plate |
English PDF |
| GB/T 31056-2014 |
Stone—Removed plate 大米去石筛板 |
China National Standards plate |
English PDF |
| GB/T 31055-2014 |
Paddy separating plate 谷糙分离筛板 |
China National Standards plate |
English PDF |
| GB/T 11063-2014 |
Polyamide plate based flat belt 聚酰胺片基平带 |
China National Standards plate |
English PDF |
| GB/T 31298-2014 |
TC4 titanium alloy plate TC4钛合金厚板 |
China National Standards plate |
English PDF |
| GB/T 31297-2014 |
TC4 ELI titanium alloy plate and sheet TC4 ELI钛合金板材 |
China National Standards plate |
English PDF |
| GB/T 1470-2014 |
Lead and lead-antimony alloy plate 铅及铅锑合金板 |
China National Standards plate |
English PDF |
| GB/T 31199-2014 |
Surface roughness parameters measurement for CTP plate substrate 计算机直接制版版基（CTP版基) 表面粗糙度参数的测定 |
China National Standards plate |
English PDF |
| Find out:459Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
