Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43609.1-2023 |
Building construction machinery and equipment Concrete and mortar preparation equipment Part 1: Terminology and commercial specifications {译} 建筑施工机械与设备 混凝土及砂浆制备设备 第1部分：术语和商业规格 |
China National Standards preparation |
 English PDF |
| GB/T 43457-2023 |
preparation and installation requirements for space science experiment samples before launch {译} 空间科学实验样品发射前准备与安装要求 |
China National Standards preparation |
English PDF |
| GB/T 43391-2023 |
Market, Public Opinion and Social Survey Survey Report preparation Guide {译} 市场、民意和社会调查 调查报告编制指南 |
China National Standards preparation |
English PDF |
| GB/T 16886.12-2023 |
Biological Evaluation of Medical Devices Part 12: Sample preparation and Reference Materials {译} 医疗器械生物学评价 第12部分：样品制备与参照材料 |
China National Standards preparation |
English PDF |
| GB/T 23113-2023 |
Sample preparation for mercury content detection in discharge lamps {译} 放电灯含汞量检测的样品制备 |
China National Standards preparation |
English PDF |
| GB/T 25774.3-2023 |
Inspection of welding materials Part 3: preparation and inspection of T-joint fillet weld specimens {译} 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验 |
China National Standards preparation |
English PDF |
| GB/T 25774.2-2023 |
Inspection of welding materials Part 2: preparation of mechanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel {译} 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备 |
China National Standards preparation |
English PDF |
| GB/T 25774.1-2023 |
Examination of welding materials Part 1: preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals {译} 焊接材料的检验 第1部分： 钢、镍及镍合金熔敷金属力学性能试样的制备 |
China National Standards preparation |
English PDF |
| GB/T 19494.2-2023 |
Mechanized sampling of coal Part 2: preparation of coal samples {译} 煤炭机械化采样 第2部分：煤样的制备 |
China National Standards preparation |
English PDF |
| GB/T 7186-2023 |
Coal preparation terminology {译} 选煤术语 |
China National Standards preparation |
English PDF |
| GB/T 42918.2-2023 |
Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination {译} 塑料 模塑和挤出用热塑性聚氨酯 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 21461.2-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB 31612-2023 |
National Food Safety Standards Hygienic Specifications for the Production of Strain preparations for Food Processing {译} 食品安全国家标准 食品加工用菌种制剂生产卫生规范 |
China National Standards preparation |
English PDF |
| GB 31639-2023 |
National food safety standards: bacterial culture preparations for food processing {译} 食品安全国家标准 食品加工用菌种制剂 |
China National Standards preparation |
English PDF |
| GB 43203-2023 |
Coal preparation Plant Safety Regulations {译} 选煤厂安全规程 |
China National Standards preparation |
English PDF |
| GB/Z 43032-2023 |
Nanotechnology Characterization of metal and metal oxide nano-objects in water samples Sample preparation methods {译} 纳米技术 水样中金属与金属氧化物纳米物体表征 样品制备方法 |
China National Standards preparation |
English PDF |
| GB/T 43214-2023 |
Technical regulations for the preparation of provincial land and space planning {译} 省级国土空间规划编制技术规程 |
China National Standards preparation |
English PDF |
| GB/T 43174-2023 |
Method for determination of adhesion of pesticide seed treatment preparations {译} 农药种子处理制剂附着性测定方法 |
China National Standards preparation |
English PDF |
| GB/T 43084.2-2023 |
Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 含氟聚合物分散体、模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 43050-2023 |
preparation and quality control of fluids for hemodialysis and related treatments General requirements {译} 血液透析和相关治疗用液体的制备和质量管理 通用要求 |
China National Standards preparation |
English PDF |
| GB/T 1630.2-2023 |
Plastics Epoxy resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins {译} 塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 |
China National Standards preparation |
English PDF |
| GB/T 42843.1-2023 |
Microbubble Technology Measurement Sampling and Sample preparation Part 1: Ultrafine Bubble Water Dispersion System {译} 微细气泡技术 测量取样及样品制备 第1部分：超细气泡水分散体系 |
China National Standards preparation |
English PDF |
| GB/T 10322.1-2023 |
Iron Ore Sampling and preparation Methods {译} 铁矿石 取样和制样方法 |
China National Standards preparation |
English PDF |
| GB/T 6730.85-2023 |
Iron ore - preparation and determination of certified standard samples for chemical analysis {译} 铁矿石 化学分析用有证标准样品的制备和定值 |
China National Standards preparation |
English PDF |
| GB/T 603-2023 |
Chemical reagents preparation of preparations and articles used in test methods {译} 化学试剂 试验方法中所用制剂及制品的制备 |
China National Standards preparation |
English PDF |
| GB/T 42658.4-2023 |
Surface Chemical Analysis Sample Handling, preparation and Setup Guide Part 4: Reporting information on the origin, preparation, handling and set-up of nanoobjects prior to surface analysis {译} 表面化学分析 样品处理、制备和安装指南 第4部分: 报告表面分析前纳米物体相关的来历、制备、处理和安装信息 |
China National Standards preparation |
English PDF |
| GB/T 26968-2023 |
Feed machinery product model preparation method {译} 饲料机械 产品型号编制方法 |
China National Standards preparation |
English PDF |
| GB/Z 42540-2023 |
Technical Guidelines for Containment of Pharmaceutical Equipment Solid preparations {译} 制药装备密闭性技术指南 固体制剂 |
China National Standards preparation |
English PDF |
| GB/T 42312-2023 |
Guidelines for the preparation of production safety emergency plans for electrochemical energy storage power stations {译} 电化学储能电站生产安全应急预案编制导则 |
China National Standards preparation |
English PDF |
| GB/T 42337-2023 |
Guidelines for the preparation of Public Credit Information Reports {译} 公共信用信息报告编制指南 |
China National Standards preparation |
English PDF |
| GB/T 31953-2023 |
Guidelines for the preparation of Enterprise Credit Evaluation Reports {译} 企业信用评价报告编制指南 |
China National Standards preparation |
English PDF |
| GB/T 5275.6-2023 |
Gas analysis - preparation of calibration gas mixtures by dynamic method - Part 6: Critical flow orifice {译} 气体分析 动态法制备校准用混合气体 第6部分：临界流锐孔 |
China National Standards preparation |
English PDF |
| GB/T 42351.1-2023 |
preparation of particulate standards Part 1: Polydisperse standards based on picket fence distribution of monodisperse spherical particles {译} 颗粒标准样品的制备 第1部分：基于单分散球形颗粒尖桩栅栏分布的多分散标准样品 |
China National Standards preparation |
English PDF |
| GB/T 23527.1-2023 |
Quality requirements for enzyme preparations Part 1: Protease preparations {译} 酶制剂质量要求 第1部分：蛋白酶制剂 |
China National Standards preparation |
English PDF |
| GB/T 2546.2-2022 |
Plastics - Polypropylene (PP) molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 聚丙烯(PP)模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 41503-2022 |
preparation of refractory sprayed material test block with amorphous refractory pneumatic nozzle and mixed spray gun {译} 不定形耐火材料 气动喷嘴混合型喷枪制备耐火喷射料试块 |
China National Standards preparation |
English PDF |
| GB/T 5275.2-2022 |
Gas analysis - preparation of calibration gas mixtures by dynamic method - Part 2: Piston pumps {译} 气体分析 动态法制备校准用混合气体 第2部分：活塞泵 |
China National Standards preparation |
English PDF |
| GB/T 41948-2022 |
Particle Characterization Sample preparation {译} 颗粒表征 样品准备 |
China National Standards preparation |
English PDF |
| GB/T 42239.2-2022 |
Enzyme preparations for washing - Part 2: Lipases {译} 洗涤用酶制剂 第2部分：脂肪酶 |
China National Standards preparation |
English PDF |
| GB/T 42239.1-2022 |
Enzyme preparations for washing - Part 1: Alkaline protease {译} 洗涤用酶制剂 第1部分：碱性蛋白酶 |
China National Standards preparation |
English PDF |
| GB 7300.403-2022 |
Feed additives - Part 4: Enzyme preparations - Cellulase {译} 饲料添加剂 第4部分：酶制剂 纤维素酶 |
China National Standards preparation |
English PDF |
| GB/T 28879-2022 |
Model preparation method of electrical instruments and meters {译} 电工仪器仪表产品型号编制方法 |
China National Standards preparation |
English PDF |
| GB/T 41877.2-2022 |
Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 41758.2-2022 |
Plastics - Polyketone (PK) molding and extrusion materials - Part 2: preparation of test specimens and determination of properties {译} 塑料 聚酮（PK）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 40503-2021 |
Measuring methods of secondary coal slime content in coal preparation plant 选煤厂次生煤泥量的测定方法 |
China National Standards preparation |
English PDF |
| GB/T 17850.9-2021 |
preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分：十字石 |
China National Standards preparation |
English PDF |
| GB/T 4214.11-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for electrically-operated food preparation appliances 家用和类似用途电器噪声测试方法 电动食品加工器具的特殊要求 |
China National Standards preparation |
English PDF |
| GB/T 1845.2-2021 |
Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 1727-2021 |
General methods for preparation of coating films 漆膜一般制备法 |
China National Standards preparation |
English PDF |
| GB/T 20370-2021 |
Guideline for enzyme preparations classification 酶制剂分类导则 |
China National Standards preparation |
English PDF |
| GB/T 13449-2021 |
Method for sampling and sample preparation of gold lump ores 金块矿取样和制样方法 |
China National Standards preparation |
English PDF |
| GB/T 39762-2021 |
Textile machinery—Opener and cleaner for staple fibres preparation—Vocabulary and principles of construction 纺织机械 短纤维开松机和清棉机 术语和结构原理 |
China National Standards preparation |
English PDF |
| GB/T 39827.2-2021 |
Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 39812-2021 |
Plastics—preparation of test specimens by machining 塑料 试样的机加工制备 |
China National Standards preparation |
English PDF |
| GB/T 41074-2021 |
Microbeam analysis -- Method of specimen preparation for analysis of general powders using WDS and EDS 微束分析 用于波谱和能谱分析的粉末试样制备方法 |
China National Standards preparation |
English PDF |
| GB/T 18916.11-2021 |
Norm of water intake—Part 11: Coal preparation 取水定额 第11部分：选煤 |
China National Standards preparation |
English PDF |
| GB/T 41185-2021 |
Specification of preparation and quality control of reference materials for DNA detection of aquatic animals pathogen -- Plasmid 水生动物病原DNA检测参考物质制备和质量控制规范 质粒 |
China National Standards preparation |
English PDF |
| GB/T 13675-2021 |
Aero-derivative gas turbines preparation for packing and shipping 航空派生型燃气轮机包装与运输 |
China National Standards preparation |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/Z 39502-2020 |
Laboratory animal—Guideline of COVID-19 animal models preparation 实验动物 新型冠状病毒肺炎（COVID-19）动物模型制备指南 |
China National Standards preparation |
English PDF |
| GB/T 39533-2020 |
preparation and testing of foamed cement slurries at atmospheric pressure 常压下泡沫水泥浆的制备及试验方法 |
China National Standards preparation |
English PDF |
| GB/T 39030-2020 |
Technical specification of physiological activity evaluation for enzyme preparations 酶制剂生理活性评价技术规范 |
China National Standards preparation |
English PDF |
| GB/T 38787-2020 |
Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials 塑料 材料生物分解试验用样品制备方法 |
China National Standards preparation |
English PDF |
| GB/T 12729.3-2020 |
Spices and condiments—preparation of a ground sample for analysis 香辛料和调味品 分析用粉末试样的制备 |
China National Standards preparation |
English PDF |
| GB/T 38523-2020 |
preparation of mixed gas pressure method 混合气体的制备 压力法 |
China National Standards preparation |
English PDF |
| GB/T 39714.2-2020 |
Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 39690.2-2020 |
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 39560.2-2020 |
Determination of certain substances in electrical and electronic products—Part 2: Disassembly，disjointment and mechanical sample preparation 电子电气产品中某些物质的测定 第2部分：拆解、拆分和机械制样 |
China National Standards preparation |
English PDF |
| GB/T 17037.5-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: preparation of standard specimens for investigating anisotropy 塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备 |
China National Standards preparation |
English PDF |
| GB/T 39530-2020 |
Thermal spraying—Nanostructured zirconia powder and coating preparation 热喷涂 纳米氧化锆粉末及涂层制备工艺技术条件 |
China National Standards preparation |
English PDF |
| GB/T 39292-2020 |
Method of sampling and sample preparation for analysis of palladium carbon wastes 废钯炭分析用取样和制样方法 |
China National Standards preparation |
English PDF |
| GB/T 38315-2019 |
Guidelines for preparation and implementation of fire fighting and emergency evacuation plans for workplaces 社会单位灭火和应急疏散预案编制及实施导则 |
China National Standards preparation |
English PDF |
| GB/T 38273.2-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 17783-2019 |
Rubber,vulcanized or thermoplastic—Chemical tests—preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 |
China National Standards preparation |
English PDF |
| GB/Z 38434-2019 |
Metallic materials—Guide to test pieces preparation for mechanical testing 金属材料 力学性能试验用试样制备指南 |
China National Standards preparation |
English PDF |
| GB/T 38315-2019 |
Guidelines for preparation and implementation of fire fighting and emergency evacuation plans for workplaces 社会单位灭火和应急疏散预案编制及实施导则 |
China National Standards preparation |
English PDF |
| GB/T 17783-2019 |
Rubber,vulcanized or thermoplastic—Chemical tests—preparation of samples and test piece 硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备 |
China National Standards preparation |
English PDF |
| GB/T 37844-2019 |
Space materials science experiment—preparation specification for solid experiment sample 空间材料科学实验 固体实验样品制备规范 |
China National Standards preparation |
English PDF |
| GB/T 37844-2019 |
Space materials science experiment—preparation specification for solid experiment sample 空间材料科学实验 固体实验样品制备规范 |
China National Standards preparation |
English PDF |
| GB/T 37597-2019 |
Electrically operated food preparation appliances—Methods for measuring the performance 电动食品加工器具 性能测试方法 |
China National Standards preparation |
English PDF |
| GB/T 37168-2018 |
Building construction machinery and equipment－Machinery and plants for the preparation of concrete and mortar safety requirements 建筑施工机械与设备-混凝土和砂浆制备机械与设备安全要求 |
China National Standards preparation |
English PDF |
| GB/T 37199.2-2018 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 37194.2-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 36167-2018 |
Method for coal preparation laboratory timed-release flotation analysis 选煤实验室分步释放浮选试验方法 |
China National Standards preparation |
English PDF |
| GB/T 35051-2018 |
Grade for closed process water circuit in coal preparation plant 选煤厂洗水闭路循环等级 |
China National Standards preparation |
English PDF |
| GB/T 2975-2018 |
Steel and steel products—Location and preparation of samples and test pieces for mechanical testing 钢及钢产品 力学性能试验取样位置及试样制备 |
China National Standards preparation |
English PDF |
| GB/T 35052-2018 |
Magnetite content measurement method for heavy medium suspension used in heavy medium cyclones in coal preparation plant 选煤厂重介质旋流器悬浮液中磁性物含量的测定方法 |
China National Standards preparation |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone polymer moulding and extrusion materials—Part2:preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 5274.1-2018 |
Gas analysis—preparation of calibration gas mixtures—Part 1:Gravimetric method for class I mixtures 气体分析 校准用混合气体的制备 第1部分：称量法制备一级混合气体 |
China National Standards preparation |
English PDF |
| GB/T 36715-2018 |
General principles for energy conservation assessment—Coal mine and coal preparation plant project 节能评估技术导则 煤炭矿井及选煤厂项目 |
China National Standards preparation |
English PDF |
| GB/T 36646-2018 |
Equipment for preparation of nitride semiconductor materials by hydride vapor phase epitaxy 制备氮化物半导体材料用氢化物气相外延设备 |
China National Standards preparation |
English PDF |
| GB/T 35983-2018 |
General specifications of dust removal system for coal sample preparation 煤样制备除尘系统通用技术条件 |
China National Standards preparation |
English PDF |
| GB/T 35814-2018 |
Method for analysis of forestry biomass—preparation of samples 林业生物质原料分析方法 样品处理方法 |
China National Standards preparation |
English PDF |
| GB/T 34690.4-2017 |
Graphic technology—Digitalized process control for offset printing—Part 4: File preparation for output 印刷技术 胶印数字化过程控制 第4部分：输出文件制作 |
China National Standards preparation |
English PDF |
| GB/T 23113-2017 |
Sample preparation for measurement of mercury level in fluorescent lamps 荧光灯含汞量检测的样品制备 |
China National Standards preparation |
English PDF |
| GB/T 34674-2017 |
Technical guideline for methane preparation from coke oven gas 焦炉气制甲烷技术导则 |
China National Standards preparation |
English PDF |
| GB/T 34691.2-2017 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: preparation of test specimens and determination of properties 塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 4513.5-2017 |
Monolithic (unshaped) refractory products—Part5： preparation and treatment of test pieces 不定形耐火材料 第5部分：试样制备和预处理 |
China National Standards preparation |
English PDF |
| GB/T 34626.1-2017 |
Metallic and other inorganic coatings—Cleaning and preparation of metal surfaces—Part 1: Ferrous metals and alloys 金属及其他无机覆盖层 金属表面的清洗和准备 第1部分：钢铁及其合金 |
China National Standards preparation |
English PDF |
| GB/T 34626.2-2017 |
Metallic and other inorganic coatings—Cleaning and preparation of metal surfaces—Part 2: Non-ferrous metals and alloys 金属及其他无机覆盖层 金属表面的清洗和准备 第2部分：有色金属及其合金 |
China National Standards preparation |
English PDF |
| GB/T 7321-2017 |
Sample preparation for testing of shaped refractory products 定形耐火制品试样制备方法 |
China National Standards preparation |
English PDF |
| GB/T 34226-2017 |
Technical guideline for formic acid preparation from yellow phosphorus tail gas 黄磷尾气制甲酸技术导则 |
China National Standards preparation |
English PDF |
| GB/T 34236-2017 |
Technical guideline for methanol preparation from carbon dioxide 二氧化碳制甲醇技术导则 |
China National Standards preparation |
English PDF |
| GB/T 34245-2017 |
Technical code for safety of formic acid preparation from yellow phosphorus tail gas 黄磷尾气制甲酸安全技术规程 |
China National Standards preparation |
English PDF |
| GB/T 34246-2017 |
Technical code for safety of methane preparation from coke oven gas 焦炉气制甲烷安全技术规程 |
China National Standards preparation |
English PDF |
| GB/T 34250-2017 |
Technical code for safety of methanol preparation from carbon dioxide 二氧化碳制甲醇安全技术规程 |
China National Standards preparation |
English PDF |
| GB/T 34164-2017 |
Method for evaluation of flotation technological performance in coal preparation plant 选煤厂浮选工艺效果评定方法 |
China National Standards preparation |
English PDF |
| GB/T 16499-2017 |
Guide for the preparation of electrical and electronic safety publications and the use of basic safety publications and group safety publications 电工电子安全出版物的编写及基础安全出版物和多专业共用安全出版物的应用导则 |
China National Standards preparation |
English PDF |
| GB/T 33942-2017 |
Guidelines for the preparation of emergency response plan for special equipment accident 特种设备事故应急预案编制导则 |
China National Standards preparation |
English PDF |
| GB/T 33689-2017 |
General rules for testing methods of coal preparation 选煤试验方法一般规定 |
China National Standards preparation |
English PDF |
| GB/T 33688-2017 |
Evaluation method for performance of coal preparation magnetic separator 选煤磁选设备工艺效果评定方法 |
China National Standards preparation |
English PDF |
| GB/T 35150.1-2017 |
Technical requirements of dry process cement production complete equipment—Part 1: Raw meal preparation system 新型干法水泥生产成套装备技术要求 第1部分：生料制备系统 |
China National Standards preparation |
English PDF |
| GB/T 16886.12-2017 |
Biological evaluation of medical devices—Part 12:Sample preparation and reference materials 医疗器械生物学评价 第12部分：样品制备与参照材料 |
China National Standards preparation |
English PDF |
| GB/T 35530-2017 |
Gas mixtures—Gravimetric preparation—Mastering correlations in composition 混合气体 称量制备 组分相关性控制 |
China National Standards preparation |
English PDF |
| GB/T 17850.4-2017 |
preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 4:Coal furnace slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第4部分：煤炉渣 |
China National Standards preparation |
English PDF |
| GB/T 35171-2017 |
Methods for sampling and sample preparation of CMSW for coprocessing in cement kiln 水泥窑协同处置的生活垃圾预处理可燃物取样和样品制备方法 |
China National Standards preparation |
English PDF |
| GB/T 35538-2017 |
Technical guides for industrial enzyme preparations assay 工业用酶制剂测定技术导则 |
China National Standards preparation |
English PDF |
| GB/T 17850.1-2017 |
preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分：导则和分类 |
China National Standards preparation |
English PDF |
| GB/T 18838.2-2017 |
preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 2: Chilled-iron grit 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁砂 |
China National Standards preparation |
English PDF |
| GB/T 17850.5-2017 |
preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 5:Nickel refinery slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分：镍精炼渣 |
China National Standards preparation |
English PDF |
| GB/T 17850.7-2017 |
preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 7: Fused aluminium oxide 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分：熔融氧化铝 |
China National Standards preparation |
English PDF |
| GB/T 35513.2-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: preparation of test specimens and determination of properties 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试 |
China National Standards preparation |
English PDF |
| GB/T 2291-2016 |
Method for preparation of coal tar pitch specimens 煤沥青实验室试样的制备方法 |
China National Standards preparation |
English PDF |
| GB/T 601-2016 |
Chemical reagent—preparations of reference titration solutions 化学试剂 标准滴定溶液的制备 |
China National Standards preparation |
English PDF |
| GB/T 32841-2016 |
Gold lump ores一Increment sampling and sample preparation 金矿石取样制样方法 |
China National Standards preparation |
English PDF |
| GB/T 6730.1-2016 |
Iron ores—preparation of predried test samples for chemical analysis 铁矿石 分析用预干燥试样的制备 |
China National Standards preparation |
English PDF |
| GB/T 32554-2016 |
Fluorspar—Experimental methods for checking the bias of sampling and sample preparation 萤石 校核取样偏差的试验方法 |
China National Standards preparation |
English PDF |
| GB/T 32553-2016 |
Fluorspar—Method of determining the precision of sampling and sample preparation 萤石 取样和制样精密度的试验方法 |
China National Standards preparation |
English PDF |
| GB/T 25774.2-2016 |
Test methods for welding consumables—Part 2: preparation of single-run and two-run technique test specimens in steel 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验 |
China National Standards preparation |
English PDF |
| GB/T 4771-2015 |
Released alkali tests of glasses and glass containers for pharmaceutical preparations 药用玻璃及其玻璃容器碱溶出量试验方法 |
China National Standards preparation |
English PDF |
| GB/T 32363.2-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: preparation of test specimens and determination of properties 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 32262-2015 |
preparation of deoxyribonucleic acid sample for atomic force microscope measurement 用于原子力显微镜检测的脱氧核糖核酸样品的制备方法 |
China National Standards preparation |
English PDF |
| GB/T 31981-2015 |
Methods of sampling and sample preparation for chemical composition analysis of titanium and titanium alloy 钛及钛合金化学成分分析取制样方法 |
China National Standards preparation |
English PDF |
| GB/T 4010-2015 |
Ferroalloys sampling and preparation of samples for chrmical analysis 铁合金化学分析用试样的采取和制备 |
China National Standards preparation |
English PDF |
| GB/T 18838.5-2015 |
preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel cut wire shot 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分：钢丝切丸 |
China National Standards preparation |
English PDF |
| GB/Z 31478-2015 |
Process management for avionics —preparation of an electronic components management plan 航空电子过程管理 电子元器件管理计划的制定 |
China National Standards preparation |
English PDF |
| GB/T 31416-2015 |
Paints and varnishes—Determination of the pot-life of multicomponent coating systems—preparation and conditioning of samples and guidelines for testing 色漆和清漆 多组分涂料体系适用期的测定 样品制备和状态调节及试验指南 |
China National Standards preparation |
English PDF |
| GB/T 51023-2014 |
Design document preparation standard of construction project for non-ferrous metallurgical engineering 有色金属冶炼工程建设项目设计文件编制标准 |
China National Standards preparation |
English PDF |
| GB 51011-2014 |
Code for construction and acceptance of coal mine preparation equipment installation engineering 煤矿选煤设备安装工程施工与验收规范 |
China National Standards preparation |
English PDF |
| GB/T 5275.9-2014 |
Gas analysis―preparation of calibration gas mixtures using dynamic volumetric methods―Part 9: Saturation method 气体分析 动态体积法制备校准用混合气体 第9部分:饱和法 |
China National Standards preparation |
English PDF |
| GB/T 5275.8-2014 |
Gas analysis―preparation of calibration gas mixtures using dynamic volumetric methods―Part 8: Diffusion method 气体分析 动态体积法制备校准用混合气体 第8部分：扩散法 |
China National Standards preparation |
English PDF |
| GB/T 5275.7-2014 |
Gas analysis―preparation of calibration gas mixtures using dynamic volumetric methods―Part 7: Thermal mass-flow controllers 气体分析 动态体积法制备校准用混合气体 第7部分：热式质量流量控制器 |
China National Standards preparation |
English PDF |
| GB/T 5275.6-2014 |
Gas analysis―preparation of calibration gas mixtures using dynamic volumetric methods―Part 6: Critical orifices 气体分析 动态体积法制备校准用混合气体 第6部分：临界锐孔 |
China National Standards preparation |
English PDF |
| GB/T 5275.5-2014 |
Gas analysis―preparation of calibration gas mixtures using dynamic volumetric methods―Part 5: Capillary calibration devices 气体分析 动态体积法制备校准用混合气体 第5部分：毛细管校准器 |
China National Standards preparation |
English PDF |
| GB/T 5275.4-2014 |
Gas analysis—preparation of calibration gas mixtures using dynamic volumetric methods—Part 4: Continuous syringe injection method 气体分析 动态体积法制备校准用混合气体 第4部分：连续注射法 |
China National Standards preparation |
English PDF |
| GB/T 5275.2-2014 |
Gas analysis―preparation of calibration gas mixtures using dynamic volumetric methods―Part 2: Volumetric pumps 气体分析 动态体积法制备校准用混合气体 第2部分：容积泵 |
China National Standards preparation |
English PDF |
| GB/T 5275.1-2014 |
Gas analysis―preparation of calibration gas mixtures using dynamic volumetric methods―Part 1: Methods of calibration 气体分析 动态体积法制备校准用混合气体 第1部分：校准方法 |
China National Standards preparation |
English PDF |
| GB/T 5275.11-2014 |
Gas analysis―preparation of calibration gas mixtures using dynamic volumetric methods―Part 11: Electrochemical generation 气体分析 动态体积法制备校准用混合气体 第11部分：电化学发生法 |
China National Standards preparation |
English PDF |
| GB/T 30924.2-2014 |
Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: preparation of test specimens and determination of properties 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 30790.4-2014 |
Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 4: Types of surface and surface preparation 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第4部分：表面类型和表面处理 |
China National Standards preparation |
English PDF |
| GB/T 10322.1-2014 |
Iron ores—Sampling and sample preparation procedures 铁矿石 取样和制样方法 |
China National Standards preparation |
English PDF |
| GB/T 30815-2014 |
Surface chemical analysis―Guidelines for preparation and mounting of specimens for analysis 表面化学分析 分析样品的制备和安装方法指南 |
China National Standards preparation |
English PDF |
| GB/T 30731-2014 |
Specifications of combined equipment for coal sample preparation 煤炭联合制样系统技术条件 |
China National Standards preparation |
English PDF |
| GB/Z 30249-2013 |
Safety requirements for electrical equipment for measurement,control,and laboratory use―Protocol for the preparation of conformity verfication reports for the GB 4793 series 测量、控制和实验室用电气设备的安全要求 GB 4793的符合性验证报告的编写规程 |
China National Standards preparation |
English PDF |
| GB/T 8303-2013 |
Tea—preparation of ground sample and determination of dry matter content 茶 磨碎试样的制备及其干物质含量测定 |
China National Standards preparation |
English PDF |
| GB/T 50951-2013 |
Design document preparation standard of construction project for nonferrous mine 有色金属矿山工程建设项目设计文件编制标准 |
China National Standards preparation |
English PDF |
| GB/T 8628-2013 |
Textiles—preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change 纺织品 测定尺寸变化的试验中织物试样和服装的准备、标记及测量 |
China National Standards preparation |
English PDF |
| GB/T 30119-2013 |
preparation method of calibration solution for atomic absorption measurement 原子吸收测量用校准溶液制备方法 |
China National Standards preparation |
English PDF |
| GB/T 50935-2013 |
Design document preparation standard of the gas drainage engineering in coal mine 煤矿瓦斯抽采工程设计文件编制标准 |
China National Standards preparation |
English PDF |
| GB/T 4414-2013 |
Methods of sampling and sample preparation of tungsten concentrates in bags 包装钨精矿取样、制样方法 |
China National Standards preparation |
English PDF |
| GB/T 3403.2-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: preparation of test specimens and determination of properties 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB/T 13454.2-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: preparation of test specimens and determination of properties 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| GB 50937-2013 |
Code for construction and acceptance of piping installation in coal preparation plant 选煤厂管道安装工程施工与验收规范 |
China National Standards preparation |
English PDF |
| GB/T 29643-2013 |
Sodium hydroxide for industrial use - Laboratory sample - preparation of the main solution for carrying out certain determinations 工业用氢氧化钠 实验室样品和进行项目测定用主溶液的制备 |
China National Standards preparation |
English PDF |
| GB/T 8923.4-2013 |
preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions 、preparation grades and flash rust grades in connection with high-pressure water jetting 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第4部分：与高压水喷射处理有关的初始表面状态、处理等级和闪锈等级 |
China National Standards preparation |
English PDF |
| GB/T 13288.4-2013 |
preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 |
China National Standards preparation |
English PDF |
| GB/T 29517-2013 |
Method for manual sample preparation of chrome ores in bulk 散装铬矿石手工制样方法 |
China National Standards preparation |
English PDF |
| GB/T 8072-2012 |
Method of sampling and preparation for chrysotile asbestos 温石棉取样、制样方法 |
China National Standards preparation |
English PDF |
| GB/T 6367-2012 |
Surface active agents - preparation of water with known calcium hardness 表面活性剂 已知钙硬度水的制备 |
China National Standards preparation |
English PDF |
| GB/T 28730-2012 |
Method for preparation of solid biofuels sample 固体生物质燃料样品制备方法 |
China National Standards preparation |
English PDF |
| GB/T 28832-2012 |
Requirments on services of preparation for international freight forwarding documents 国际货运单证缮制质量要求 |
China National Standards preparation |
English PDF |
| GB/T 28831-2012 |
Code of preparation for international freight forwarding documents 国际货运单证缮制规范 |
China National Standards preparation |
English PDF |
| GB/T 28372-2012 |
Ferroalloys - Sampling and preparation of samples-General rules 铁合金 取样和制样总则 |
China National Standards preparation |
English PDF |
| GB/T 8923.1-2011 |
preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第1部分：未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级 |
China National Standards preparation |
English PDF |
| GB/T 18570.6-2011 |
preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法 |
China National Standards preparation |
English PDF |
| GB/T 17850.6-2011 |
preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣 |
China National Standards preparation |
English PDF |
| GB/T 13288.2-2011 |
preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分：磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法 |
China National Standards preparation |
English PDF |
| GB/T 27722-2011 |
Calculation method of energy equilibrium and energy efficiency in the raw material preparation system of wood pulp 木浆备料系统能量平衡及能量效率计算方法 |
China National Standards preparation |
English PDF |
| GB/T 27707-2011 |
Calculation method of energy equilibrium and energy efficiency in the raw material preparation system of straw pulp 草浆备料系统能量平衡及能量效率计算方法 |
China National Standards preparation |
English PDF |
| GB/T 17850.11-2011 |
preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 11: Special type grit of steel slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分：钢渣特种型砂 |
China National Standards preparation |
English PDF |
| GB/T 50748-2011 |
Standard for drawing of coal preparation technology 选煤工艺制图标准 |
China National Standards preparation |
English PDF |
| GB/T 27503-2011 |
Test solutions of electrolytic conductivity analyzer - preparation method of sodium chloride solutions 电导率仪的试验溶液 氯化钠溶液制备方法 |
China National Standards preparation |
English PDF |
| GB/T 27502-2011 |
preparation method of reference solutions for the measurement of conductivity 电导率测量用校准溶液制备方法 |
China National Standards preparation |
English PDF |
| GB/T 27501-2011 |
preparation method of buffer solutions for the measurement of pH value pH值测定用缓冲溶液制备方法 |
China National Standards preparation |
English PDF |
| GB/T 26935-2011 |
preparation of steel substrates and paints application for freight containers 集装箱钢材表面处理和涂料施工规范 |
China National Standards preparation |
English PDF |
| GB/T 26919-2011 |
Coal preparation plant - Methods for the natural falling testing of slurry 选煤厂 煤泥水自然沉降试验方法 |
China National Standards preparation |
English PDF |
| GB/T 26918-2011 |
Coal preparation plant - Test methods for degradation in water of raw coal feed in drum 选煤厂 煤的转筒泥化试验方法 |
China National Standards preparation |
English PDF |
| GB/T 26812-2011 |
preparation method of reference solutions for the measurement of ion selective electrodes 离子选择电极校准溶液制备方法 |
China National Standards preparation |
English PDF |
| GB/T 26515.1-2011 |
Essential oils - General guidance on chromatographic profiles - Part 1: preparation of chromatographic profiles for presentation in standards 精油 气相色谱图像通用指南 第1部分：标准中气相色谱图像的建立 |
China National Standards preparation |
English PDF |
| GB/T 3849.2-2010 |
Hardmetals - Rockwell hardness test (scale A) - Part 2: preparation and calibration of standard test blocks 硬质合金 洛氏硬度试验（A标尺） 第2部分：标准试块的制备和校准 |
China National Standards preparation |
English PDF |
| GB/T 50651-2011 |
preparation standard for general planning on mining area of coal industry 煤炭工业矿区总体规划文件编制标准 |
China National Standards preparation |
English PDF |
| GB/T 25949-2010 |
Aluminium ores - preparation of samples 铝土矿 样品制备 |
China National Standards preparation |
English PDF |
| GB/T 14263-2010 |
Methods for sampling and sample preparation of flotation copper concentrates in bulk 散装浮选铜精矿取样、制样方法 |
China National Standards preparation |
English PDF |
| GB/T 14262-2010 |
Methods for sampling and sample preparation of flotation lead concentrates in bulk 散装浮选铅精矿取样、制样方法 |
China National Standards preparation |
English PDF |
| GB/T 14261-2010 |
Methods for sampling and sample preparation of flotation zinc concentrates in bulk 散装浮选锌精矿取样、制样方法 |
China National Standards preparation |
English PDF |
| GB/T 14260-2010 |
General rules for sampling and sample preparation of heavy nonferrous metals flotation concentrates in bulk 散装重有色金属浮选精矿取样、制样通则 |
China National Standards preparation |
English PDF |
| GB/T 25777-2010 |
preparation methods for deposited metal specimens of chemical analysis 焊接材料熔敷金属化学分析试样制备方法 |
China National Standards preparation |
English PDF |
| GB/T 25774.3-2010 |
Test methods for welding consumables - Part 3: preparation and testing of a fillet weld specimens for T-joint 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验 |
China National Standards preparation |
English PDF |
| GB/T 25774.1-2010 |
Test methods for welding consumables - Part 1: preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys 焊接材料的检验 第1部分：钢、镍及镍合金熔敷金属力学性能试样的制备及检验 |
China National Standards preparation |
English PDF |
| GB/T 15597.2-2010 |
Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards preparation |
English PDF |
| Find out:368Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
