Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43564-2023 |
Primary and secondary school synthetic material surface track and field venues {译} 中小学合成材料面层田径场地 |
China National Standards rack |
 English PDF |
| GB 43630-2023 |
Tower and rack server energy efficiency limits and energy efficiency levels {译} 塔式和机架式服务器能效限定值及能效等级 |
China National Standards rack |
English PDF |
| GB/T 43434-2023 |
Test method for crack resistance of laser repair area {译} 激光修复区域抗裂性试验方法 |
China National Standards rack |
English PDF |
| GB/T 27866-2023 |
Technical specification for hardness control of steel pipes and equipment to prevent sulfide stress cracking of welds {译} 钢制管道和设备防止焊缝硫化物应力开裂的硬度控制技术规范 |
China National Standards rack |
English PDF |
| GB/T 43403-2023 |
Road vehicles Trailers below 3.5t Quality inspection after fatigue test of welded traction brackets for connecting balls {译} 道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查 |
China National Standards rack |
English PDF |
| GB/T 19520.22-2023 |
Mechanical structures of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-110: Residential racks and cabinets for smart homes {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-110部分：智慧房屋用住宅机架和机柜 |
China National Standards rack |
English PDF |
| GB/T 43316.6-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method {译} 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 |
China National Standards rack |
English PDF |
| GB/T 43316.5-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method {译} 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 |
China National Standards rack |
English PDF |
| GB/T 43316.4-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method {译} 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 |
China National Standards rack |
English PDF |
| GB/T 43316.3-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method {译} 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 |
China National Standards rack |
English PDF |
| GB/T 43316.2-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 2: Constant tensile load method {译} 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 |
China National Standards rack |
English PDF |
| GB/T 43316.1-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 1: General principles {译} 塑料 耐环境应力开裂(ESC)的测定 第1部分:通则 |
China National Standards rack |
English PDF |
| GB/T 5338.5-2023 |
Series 1 containers - Technical requirements and test methods - Part 5: Platform and rack-mounted containers {译} 系列1集装箱 技术要求和试验方法 第5部分：平台和台架式集装箱 |
China National Standards rack |
English PDF |
| GB/T 43143-2023 |
Nondestructive testing Acoustic emission testing Detection method for classification of active cracks in concrete structures {译} 无损检测 声发射检测 混凝土结构活动裂缝分类的检测方法 |
China National Standards rack |
English PDF |
| GB/T 42903-2023 |
Metallic materials—Method for determination of creep crack and creep-fatigue crack growth rates {译} 金属材料 蠕变裂纹及蠕变-疲劳裂纹扩展速率测定方法 |
China National Standards rack |
English PDF |
| GB/T 22790-2023 |
Bicycles - Luggage racks for two-wheeled bicycles - Requirements and test methods {译} 自行车 两轮自行车行李架 要求和试验方法 |
China National Standards rack |
English PDF |
| GB/T 42538.2-2023 |
Agricultural and forestry tractors - Safety - Part 2: Narrow track and small tractors {译} 农林拖拉机 安全 第2部分：窄轮距和小型拖拉机 |
China National Standards rack |
English PDF |
| GB/T 42348-2023 |
Particle Size Analysis Particle Tracking Analysis (PTA) {译} 粒度分析 颗粒跟踪分析法(PTA) |
China National Standards rack |
English PDF |
| GB/T 4207-2022 |
Method for determination of tracking resistance index and relative tracking index of solid insulating materials {译} 固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法 |
China National Standards rack |
English PDF |
| GB/T 41644-2022 |
Fireworks and firecrackers - Inspection and testing methods {译} 烟花爆竹 检验检测方法 |
China National Standards rack |
English PDF |
| GB/T 10322.6-2022 |
Determination of hot cracking index of iron ore for blast furnace charge {译} 高炉炉料用铁矿石 热裂指数的测定 |
China National Standards rack |
English PDF |
| GB/T 12967.5-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第5部分：抗破裂性的测定 |
China National Standards rack |
English PDF |
| GB/T 15970.11-2022 |
Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for hydrogen embrittlement and hydrogen-induced cracking tests of metals and alloys {译} 金属和合金的腐蚀 应力腐蚀试验 第11部分:金属和合金氢脆和氢致开裂试验指南 |
China National Standards rack |
English PDF |
| GB/T 42095-2022 |
Swimming self-aligning self-locking nuts for MJ thread double-ear brackets for aerospace {译} 航空航天用MJ螺纹双耳托板游动自调心自锁螺母 |
China National Standards rack |
English PDF |
| GB/T 16857.10-2022 |
Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance Test and Re-inspection Test Part 10: Laser Tracker {译} 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第10部分：激光跟踪仪 |
China National Standards rack |
English PDF |
| GB/T 41941-2022 |
Vulcanized rubber - Determination of fatigue crack growth rate {译} 硫化橡胶 疲劳裂纹扩展速率的测定 |
China National Standards rack |
English PDF |
| GB/T 41933-2022 |
Plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method {译} 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法 |
China National Standards rack |
English PDF |
| GB/T 18663.5-2022 |
Mechanical construction of electronic equipment - Tests for metric and imperial series - Part 5: Seismic tests for enclosures, subracks and inserts {译} 电子设备机械结构 公制系列和英制系列的试验 第5部分：机箱、插箱和插件的地震试验 |
China National Standards rack |
English PDF |
| GB/T 41792-2022 |
Plastics - Films and sheets - Determination of cold cracking temperature {译} 塑料制品 薄膜和薄片 冷裂温度的测定 |
China National Standards rack |
English PDF |
| GB/T 41794-2022 |
Geosynthetics - Evaluation of stress cracking resistance of polyolefin geomembranes - Notched constant tensile load method {译} 土工合成材料 聚烯烃土工膜耐应力开裂性能的评价 切口恒定拉伸负荷法 |
China National Standards rack |
English PDF |
| GB/T 41755-2022 |
Cracking susceptibility test of pipeline steel pipe in acidic environment-full ring specimen ellipse deformation method {译} 酸性环境中管线钢管开裂敏感性试验 全环试样椭圆变形法 |
China National Standards rack |
English PDF |
| GB/T 41745-2022 |
Evaluation of Sealant Aging Cracks by Picture Method {译} 密封胶老化裂纹的评价 图片法 |
China National Standards rack |
English PDF |
| GB/Z 10096-2022 |
rack accuracy {译} 齿条精度 |
China National Standards rack |
English PDF |
| GB/T 40521.2-2021 |
Passenger cars test track for a severe lane-change manoeuvre—Part 2: Obstacle avoidance 乘用车紧急变线试验车道 第2部分：避障 |
China National Standards rack |
English PDF |
| GB/T 40521.1-2021 |
Passenger cars test track for a severe lane-change manoeuvre—Part 1: Double lane-change 乘用车紧急变线试验车道 第1部分：双移线 |
China National Standards rack |
English PDF |
| GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards rack |
English PDF |
| GB/T 40339-2021 |
Corrosion of metals and alloys—Guidelines for assessing the significances of stress corrosion cracks detected in service 金属和合金的腐蚀 服役中检出的应力腐蚀裂纹的重要性评估导则 |
China National Standards rack |
English PDF |
| GB/T 22888-2021 |
Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings 皮革 物理和机械试验 表面涂层低温脆裂温度的测定 |
China National Standards rack |
English PDF |
| GB/T 39996-2021 |
Fireworks and firecrackers—Determination of calorific value of pyrotechnic powder 烟花爆竹 烟火药发热量的测定 |
China National Standards rack |
English PDF |
| GB/T 39801-2021 |
General technical specifications of membrane distillation device for seawater and brackish water desalination 海水或苦咸水淡化用膜蒸馏装置通用技术规范 |
China National Standards rack |
English PDF |
| GB/T 41107.2-2021 |
Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第2部分：自拘束试验 |
China National Standards rack |
English PDF |
| GB/T 41107.1-2021 |
Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 1: General 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第1部分：总则 |
China National Standards rack |
English PDF |
| GB/T 6445-2021 |
Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 滚轮滚针轴承 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards rack |
English PDF |
| GB/T 41106.2-2021 |
Large-scale amusement devices -- Inspection, maintenance and repair -- Part 2: Sort of track rides 大型游乐设施 检查、维护保养与修理 第2部分：轨道类 |
China National Standards rack |
English PDF |
| GB/T 41174-2021 |
Professional sportswear -- Track and field garment 专业运动服装? 田径服 |
China National Standards rack |
English PDF |
| GB/T 20882.4-2021 |
Rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 淀粉糖质量要求 第4部分：果葡糖浆 |
China National Standards rack |
English PDF |
| GB/T 40919-2021 |
Polyethylene materials for piping systems—Determination of Strain Hardening Modulus in relation to slow crack growth 管道系统用聚乙烯材料 与慢速裂纹增长相关的应变硬化模量的测定 |
China National Standards rack |
English PDF |
| GB/T 18663.2-2021 |
Mechanical structures for electronic equipment—Tests for metric and inch system—Part 2: Seismic tests for cabinets and racks 电子设备机械结构 公制系列和英制系列的试验 第2部分：机柜和机架的地震试验 |
China National Standards rack |
English PDF |
| GB/T 40674-2021 |
Fireworks and firecrackers—Evaluation method of environmental protection 烟花爆竹 环保评价方法 |
China National Standards rack |
English PDF |
| GB/T 51422-2021 |
Technical standard for auto tracking and targeting jet suppression system 建筑金属板围护系统检测鉴定及加固技术标准 |
China National Standards rack |
English PDF |
| GB 51427-2021 |
Technical standard for auto tracking and targeting jet suppression system 自动跟踪定位射流灭火系统技术标准 |
China National Standards rack |
English PDF |
| GB/T 39213-2020 |
Dredging track and profile monitor 疏浚轨迹与剖面显示系统 |
China National Standards rack |
English PDF |
| GB/T 38948-2020 |
Evaluation method for the cracking resistance of asphalt mixture at low temperature 沥青混合料低温抗裂性能评价方法 |
China National Standards rack |
English PDF |
| GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards rack |
English PDF |
| GB/T 38769-2020 |
Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces 金属材料 预裂纹夏比试样冲击加载断裂韧性的测定 |
China National Standards rack |
English PDF |
| GB/T 38695-2020 |
Technical specification for ballastless track of urban rail transit 城市轨道交通无砟轨道技术条件 |
China National Standards rack |
English PDF |
| GB/T 39681-2020 |
racking design code for steel static storage systems 立体仓库货架系统设计规范 |
China National Standards rack |
English PDF |
| GB/T 39559.4-2020 |
Specifications for operational monitoring of urban rail transit facilities—Part 4: Track and earthworks 城市轨道交通设施运营监测技术规范 第4部分：轨道和路基 |
China National Standards rack |
English PDF |
| GB/T 39705-2020 |
Track bed vibration isolating mat for rail traffic 轨道交通用道床隔振垫 |
China National Standards rack |
English PDF |
| GB/T 39454-2020 |
Specification for international trade business data—Cargo tracking and tracing 国际贸易业务数据规范 货物跟踪与追溯 |
China National Standards rack |
English PDF |
| GB/T 19520.19-2020 |
Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-107: Dimensions of subracks and plug-in units, small form factor 电子设备机械结构 482.6 mm（19 in）系列机械结构尺寸 第3-107部分：小型化插箱和插件的尺寸 |
China National Standards rack |
English PDF |
| GB/T 18663.3-2020 |
Mechanical structures for electronic equipment—Tests for metric and inch system—Part 3: Electromagnetic shielding performance tests for cabinets and subracks 电子设备机械结构 公制系列和英制系列的试验 第3部分：机柜和插箱的电磁屏蔽性能试验 |
China National Standards rack |
English PDF |
| GB/T 39484-2020 |
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 |
China National Standards rack |
English PDF |
| GB/T 22517.6-2020 |
Technical requirements and test methods for sports field—Part 6: Track and field 体育场地使用要求及检验方法 第6部分：田径场地 |
China National Standards rack |
English PDF |
| GB/T 38277-2019 |
Brittle crack arrest high strength steel plate for ship 船用高强度止裂钢板 |
China National Standards rack |
English PDF |
| GB/T 38277-2019 |
Brittle crack arrest high strength steel plate for ship 船用高强度止裂钢板 |
China National Standards rack |
English PDF |
| GB/T 37923-2019 |
Trackless mining truck for open-pit mines—Safety requirements 露天矿用无轨运矿车 安全要求 |
China National Standards rack |
English PDF |
| GB/T 37891.6-2019 |
Cutter arbors with parallel key and tenon drive—Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system 带平键和端键传动的铣刀杆 第6部分：带钢球拉紧系统的模块圆锥柄刀杆的尺寸和标记 |
China National Standards rack |
English PDF |
| GB/T 18476-2019 |
Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验） |
China National Standards rack |
English PDF |
| GB/T 37330-2019 |
Sleeper for ballasted track—Concrete sleeper 有砟轨道轨枕 混凝土枕 |
China National Standards rack |
English PDF |
| GB/T 37456-2019 |
Electric driven rack pinion jacking system for offshore platform 海洋平台电驱动齿轮齿条升降装置 |
China National Standards rack |
English PDF |
| GB/T 37417-2019 |
Maritime navigation and radiocommunication equipment and systems—Track control systems—Operational and performance requirements，methods of testing and required test results 海上导航和无线电通信设备及系统 航迹控制系统 操作和性能要求、测试方法及要求的测试结果 |
China National Standards rack |
English PDF |
| GB/T 19290.6-2018 |
Modular order for the development of mechanical structures for electronic equipment practices—Part 2-4: Sectional specification—Interface co-ordination dimensions for the 25 mm equipment practice—Adaptation dimensions for subracks or chassis applica 发展中的电子设备构体机械结构模数序列-第2-4部分:分规范-25-mm设备构体的接口协调尺寸-适用于符合IEC-60297-3-100(19-in)机柜或机架的插箱或机箱的适配尺寸 |
China National Standards rack |
English PDF |
| GB/T 19520.18-2018 |
Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 电子设备机械结构-482.6-mm(19-in)系列机械结构尺寸-第3-106部分:适用于符合IEC-60917-2-1公制机柜或机架的插箱和机箱的适配尺寸 |
China National Standards rack |
English PDF |
| GB/T 37121-2018 |
Non-destructive testing—Crack phantom for industrial computed tomography (CT) testing 无损检测-工业计算机层析成像（CT）检测用裂纹测试卡 |
China National Standards rack |
English PDF |
| GB/T 21152-2018 |
Earth-moving machinery—Wheeled or high-speed rubber-tracked machines—Performance requirements and test procedures for brake systems 土方机械-轮式或高速橡胶履带式机器-制动系统的性能要求和试验方法 |
China National Standards rack |
English PDF |
| GB/T 36152-2018 |
Safety assessment code of practice of rack and pinion hoists for persons and materials 齿轮齿条式人货两用施工升降机安全评估规程 |
China National Standards rack |
English PDF |
| GB/T 10183.1-2018 |
Cranes—Tolerances for wheels and travel and traversing tracks—Part 1：General 起重机 车轮及大车和小车轨道公差 第1部分：总则 |
China National Standards rack |
English PDF |
| GB/T 11313.38-2018 |
Radio-frequency connectors—Part 38: Sectional specification for 50 Ω model,slide-in radio frequency coaxial connectors (type TMA) for rack and panel applications 射频连接器 第38部分: 50Ω背板和面板用模块滑入式射频连接器(TMA型)分规范 |
China National Standards rack |
English PDF |
| GB/T 36797-2018 |
Epoxy resin joint sealant for anti-cracking in refurbishment 装修防开裂用环氧树脂接缝胶 |
China National Standards rack |
English PDF |
| GB/T 36676-2018 |
External inspection methodology of stress corrosion cracking (SCC) for buried steel pipelines 埋地钢质管道应力腐蚀开裂(SCC)外检测方法 |
China National Standards rack |
English PDF |
| GB/T 35804-2018 |
Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in laboratory test chambers 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法 |
China National Standards rack |
English PDF |
| GB/T 22157-2018 |
Acoustics—Specification of test tracks for measuring noise emitted by road vehicles and their tyres 声学 测量道路车辆和轮胎噪声的试验车道技术规范 |
China National Standards rack |
English PDF |
| GB/T 34786-2017 |
Grain and oil machinery—Toothed cracking roll 粮油机械 齿辊式破碎机 |
China National Standards rack |
English PDF |
| GB/T 4157-2017 |
Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environment 金属在硫化氢环境中抗硫化物应力开裂和应力腐蚀开裂的实验室试验方法 |
China National Standards rack |
English PDF |
| GB/T 28807.2-2017 |
Railway applications—Compatibility between rolling stock and train detection systems—Part 2: Compatibility with track circuits 轨道交通 机车车辆和列车检测系统的兼容性 第2部分：与轨道电路的兼容性 |
China National Standards rack |
English PDF |
| GB/T 34182-2017 |
Composite cable bracket 复合材料电缆支架 |
China National Standards rack |
English PDF |
| GB/T 34232-2017 |
Rubber pad for tracked machines 橡胶履带板 |
China National Standards rack |
English PDF |
| GB/T 34130.22-2017 |
Powertrack systems—Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation 电源母线系统 第22部分：用于地面和地下安装的电源母线系统的特殊要求 |
China National Standards rack |
English PDF |
| GB/T 34130.21-2017 |
Powertrack systems—Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting 电源母线系统 第21部分：用于墙壁和天花板安装的电源母线系统的特殊要求 |
China National Standards rack |
English PDF |
| GB/T 34130.1-2017 |
Powertrack systems—Part 1:General requirements 电源母线系统 第1部分：通用要求 |
China National Standards rack |
English PDF |
| GB/T 6398-2017 |
Metallic materials—Fatigue testing—Fatigue crack growth method 金属材料 疲劳试验 疲劳裂纹扩展方法 |
China National Standards rack |
English PDF |
| GB/T 33903-2017 |
Automatic solar tracker of shading ball model for diffuse radiation measurement 散射辐射测量用遮光球式全自动太阳跟踪器 |
China National Standards rack |
English PDF |
| GB/T 33692-2017 |
Automatic solar tracker for direct radiation measurement 直接辐射测量用全自动太阳跟踪器 |
China National Standards rack |
English PDF |
| GB/T 33578.2-2017 |
Guideline of risk based inspection of complete units—Part 2：Catalytic cracking units 成套装置基于风险的检验细则 第2部分：催化裂化装置 |
China National Standards rack |
English PDF |
| GB/T 33640-2017 |
Installation quality inspection code of rack and pinion hoists for persons and materials 齿轮齿条式人货两用施工升降机安装质量检验规程 |
China National Standards rack |
English PDF |
| GB/T 33279-2017 |
Ribbed bars for track panel 轨道板用钢筋 |
China National Standards rack |
English PDF |
| GB/T 33524.1-2017 |
Modular taper interface with ball track system—Part 1: Dimensions and designation of shanks 带有钢球拉紧系统的模块圆锥接口 第1部分：柄部尺寸和标记 |
China National Standards rack |
English PDF |
| GB/T 33524.2-2017 |
Modular taper interface with ball track system—Part 2: Dimensions and designation of receivers 带有钢球拉紧系统的模块圆锥接口 第2部分：安装孔尺寸和标记 |
China National Standards rack |
English PDF |
| GB/T 35437-2017 |
General specification for spaceborne opto-electronic tracking and imaging system 星载光电跟踪成像系统通用规范 |
China National Standards rack |
English PDF |
| GB/T 35585-2017 |
Furnace temperature track logger 炉温跟踪记录仪 |
China National Standards rack |
English PDF |
| GB/T 35436-2017 |
Interface design specification for standard modules of science experiment rack in space station 空间站科学实验柜标准模块接口设计规范 |
China National Standards rack |
English PDF |
| GB/T 35753-2017 |
Installation rack standard for outdoor unit of air-conditioning 空调器室外机安装用支架 |
China National Standards rack |
English PDF |
| GB/T 35438-2017 |
Specification for quick disconnect gas or liquid couplings of science experiment rack in space station 空间站科学实验柜气液快换接头规范 |
China National Standards rack |
English PDF |
| GB/T 35761-2017 |
Determination methods of heavy metal element content in printing ink or painting of fireworks and firecracker 烟花爆竹用油墨（漆）中重金属含量的测试方法 |
China National Standards rack |
English PDF |
| GB/T 35435-2017 |
General design specification of science experiment rack in space station 空间站科学实验柜通用设计规范 |
China National Standards rack |
English PDF |
| GB/T 33454-2016 |
Operation specification of storage rack 仓储货架使用规范 |
China National Standards rack |
English PDF |
| GB/T 33341-2016 |
General requirements for swapping battery pack rack of electric vehicle 电动汽车快换电池箱架通用技术要求 |
China National Standards rack |
English PDF |
| GB/T 32682-2016 |
Plastics—Determination of environment stress cracking (ESC) of polyethylene—Full-notch creep test (FNCT) 塑料 聚乙烯环境应力开裂（ESC）的测定 全缺口蠕变试验（FNCT） |
China National Standards rack |
English PDF |
| GB/T 32609-2016 |
The physical parameters and test methods of tennis rackets and parts 网球拍及部件的物理参数和试验方法 |
China National Standards rack |
English PDF |
| GB/T 32608-2016 |
The physical parameters and test methods of badminton racket and parts 羽毛球拍及部件的物理参数和试验方法 |
China National Standards rack |
English PDF |
| GB 51101-2016 |
Technical code for supporting bracket foundation of solar power station 太阳能发电站支架基础技术规范 |
China National Standards rack |
English PDF |
| GB/T 32525-2016 |
General specification for photoelectric tracking and measuring equipment 光电跟踪测量设备通用规范 |
China National Standards rack |
English PDF |
| GB/T 1592.2-2016 |
Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第2部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards rack |
English PDF |
| GB/T 11313.29-2015 |
Radio frequency connectors—Part 29: Sectional specification for miniature radio frequency coaxial connector(type 1.0/2.3)with screw, snap-on, push-pull or quick-lock,slide-in （rack and panel applications）mechanism with characteristic impedance 50Ω 射频连接器 第29部分：50Ω和75Ω用特性阻抗为50Ω、具有螺纹、推拉、快锁或滑轨式机架或面板用小型射频同轴连接器（1.0/2.3型）分规范 |
China National Standards rack |
English PDF |
| GB/T 8650-2015 |
Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking 管线钢和压力容器钢抗氢致开裂评定方法 |
China National Standards rack |
English PDF |
| GB/T 32260.3-2015 |
Destructive tests on welds in metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 3: Externally load tests 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第3部分：外载荷试验 |
China National Standards rack |
English PDF |
| GB/T 32260.2-2015 |
Destructive tests on welds in metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 2: Self-restraint tests 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第2部分：自拘束试验 |
China National Standards rack |
English PDF |
| GB/T 32260.1-2015 |
Destructive tests on welds in metallic materials—Cold cracking tests for weldments—Arc welding processes—Part 1: General 金属材料焊缝的破坏性试验 焊件的冷裂纹试验 弧焊方法 第1部分：总则 |
China National Standards rack |
English PDF |
| GB/T 21956.3-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 3：Static testing method of rear mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第3部分：后置式静态试验方法 |
China National Standards rack |
English PDF |
| GB/T 21956.2-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2：Dynamic testing method of front mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第2部分：前置式动态试验方法 |
China National Standards rack |
English PDF |
| GB/T 21956.1-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 1：Static testing method of front mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第1部分：前置式静态试验方法 |
China National Standards rack |
English PDF |
| GB/T 20786-2015 |
Rubber track 橡胶履带 |
China National Standards rack |
English PDF |
| GB/T 32027-2015 |
Footwear—Resistance to crack initiation and growth—Belt flex method 鞋类 抗弯曲性能 传送带耐折试验方法 |
China National Standards rack |
English PDF |
| GB/T 30789.4-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 4: Assessment of degree of cracking 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第4部分：开裂等级的评定 |
China National Standards rack |
English PDF |
| GB/T 19520.16-2015 |
Mechanical structures for electronic equipment—Dimension of mechanical structures of the 482.6 mm (19 in) series—Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-100部分：面板、插箱、机箱、机架和机柜的基本尺寸 |
China National Standards rack |
English PDF |
| GB/T 7268-2015 |
Series of basic dimensions of subracks and associated plug-in units panels for protection and automation equipment of power system 电力系统保护及其自动化装置用插箱及插件面板基本尺寸系列 |
China National Standards rack |
English PDF |
| GB/T 19131-2015 |
Tri-wheel vehicles and low-speed goods vehicles—License plates(crackets) and it`s position 三轮汽车和低速货车 号牌板(架)及其位置 |
China National Standards rack |
English PDF |
| GB/T 13642-2015 |
Rubber, vulcanized or thermoplastic—Resistance to ozone cracking—Dynamic strain testing 硫化橡胶或热塑性橡胶 耐臭氧龟裂 动态拉伸试验 |
China National Standards rack |
English PDF |
| GB/T 7762-2014 |
Rubber, vulcanized or thermoplastic―Resistance to ozone cracking―Static strain testing 硫化橡胶或热塑性橡胶 耐臭氧龟裂 静态拉伸试验 |
China National Standards rack |
English PDF |
| GB 51019-2014 |
Code for design of pipe racks and pipe sleepers in chemical industry 化工工程管架、管墩设计规范 |
China National Standards rack |
English PDF |
| GB/T 30911-2014 |
The performance test procedures of rack-and pinion hydraulic power steering lips seals 汽车齿轮齿条式动力转向器唇形密封圈性能试验方法 |
China National Standards rack |
English PDF |
| GB/T 6553-2014 |
Electrical insulating materials used under severe ambient conditions―Test methods for evaluating resistance to tracking and erosion 严酷环境条件下使用的电气绝缘材料 评定耐电痕化和蚀损的试验方法 |
China National Standards rack |
English PDF |
| GB/T 12967.5-2013 |
Test methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 5：Assessment of resistance of anodic oxidation coatings to cracking by deformation 铝及铝合金阳极氧化膜检测方法 第5部分：用变形法评定阳极氧化膜的抗破裂性 |
China National Standards rack |
English PDF |
| GB 9948-2013 |
Seamless steel tubes for petroleum cracking 石油裂化用无缝钢管 |
China National Standards rack |
English PDF |
| GB/T 29417-2012 |
Standard test methods for drying shrinkage stress and cracking possibility of cement mortar and concrete 水泥砂浆和混凝土干燥收缩开裂性能试验方法 |
China National Standards rack |
English PDF |
| GB/T 4207-2012 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials 固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法 |
China National Standards rack |
English PDF |
| GB/T 29320-2012 |
Technical requirenment for tracking system of PV power station 光伏电站太阳跟踪系统技术要求 |
China National Standards rack |
English PDF |
| GB 11652-2012 |
Technical regulations for the working safety of fireworks and firecrackers 烟花爆竹作业安全技术规程 |
China National Standards rack |
English PDF |
| GB/T 28576-2012 |
Calculation of industrial rack design 工业货架设计计算 |
China National Standards rack |
English PDF |
| GB/T 28200-2011 |
Technical requirements and test methods of steeliness storage units（rack） 钢制储物柜（架）技术要求及试验方法 |
China National Standards rack |
English PDF |
| GB/T 27866-2011 |
Specification of controlling weld hardness of carbon steel and low alloy steel piping and equipment to prevent sulfide stress cracking 控制钢制管道和设备焊缝硬度防止硫化物应力开裂技术规范 |
China National Standards rack |
English PDF |
| GB/T 27924-2011 |
Sizes and load ratings for industrial rack 工业货架规格尺寸与额定荷载 |
China National Standards rack |
English PDF |
| GB/T 22517.6-2011 |
Technical requirements and test methods for sports filed - Part 6： Track and field 体育场地使用要求及检验方法 第6部分：田径场地 |
China National Standards rack |
English PDF |
| GB/T 14833-2011 |
Synthetic - materials track surfaces 合成材料跑道面层 |
China National Standards rack |
English PDF |
| GB/T 26477.1-2011 |
Cranes - Design calculation for rail wheels and associated trolley track supporting structure - Part 1: General 起重机 车轮和相关小车承轨结构的设计计算 第1部分：总则 |
China National Standards rack |
English PDF |
| GB/T 26169-2010 |
Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test 电气绝缘材料耐电痕化和电蚀损的评定方法 旋转轮沉浸试验 |
China National Standards rack |
English PDF |
| GB/T 26198-2010 |
Fireworks and firecracker - Iron powder 烟花爆竹用铁粉 |
China National Standards rack |
English PDF |
| GB/T 26197-2010 |
Antimony sutfide for fireworks and firecracker 烟花爆竹用硫化锑 |
China National Standards rack |
English PDF |
| GB/T 26196-2010 |
Fireworks and firecrackers - Determination of carbon content in pyrotechnic compositions - High frequency-infrared absorption method 烟花爆竹 烟火药中碳含量的测定 高频-红外吸收法 |
China National Standards rack |
English PDF |
| GB/T 26195-2010 |
Fireworks and firecracker - Determination of arsenic in pyrotechnic composition 烟花爆竹 烟火药中砷的测定 |
China National Standards rack |
English PDF |
| GB/T 15814.1-2010 |
Fireworks and firecracker - Qualitative determination of pyrotechnic compositions 烟花爆竹烟火药成分定性测定 |
China National Standards rack |
English PDF |
| GB/T 25996-2010 |
Test method for thermal insulations on external stress corrosion cracking of austenitic stainless steel 绝热材料对奥氏体不锈钢外部应力腐蚀开裂的试验方法 |
China National Standards rack |
English PDF |
| GB/T 10183.4-2010 |
Cranes - Tolerances for wheels and travel and traversing tracks - Part 4: Jib cranes 起重机 车轮及大车和小车轨道公差 第4部分：臂架起重机 |
China National Standards rack |
English PDF |
| GB/T 10183.1-2010 |
Cranes - Tolerances for wheels and travel and traversing tracks - Part 1: General 起重机 车轮及大车和小车轨道公差 第1部分：总则 |
China National Standards rack |
English PDF |
| GB 25525-2010 |
Track-type loading machine underground mine - Safety requirements 地下矿用履带装载机械 安全要求 |
China National Standards rack |
English PDF |
| GB 25524-2010 |
Track wheel loading machine for underground mine - Safety requirements 地下矿用轨轮装载机械 安全要求 |
China National Standards rack |
English PDF |
| GB/T 25402-2010 |
Equipment for crop protection - Sprayers - Demonstration track for field crop sprayers 植物保护机械 喷雾机 大田作物喷雾机用试验跑道 |
China National Standards rack |
English PDF |
| GB/T 25342-2010 |
Vocabulary for railway track-laying machine and girder-erecting machine 铁路铺轨机、架桥机词汇 |
China National Standards rack |
English PDF |
| GB/T 25339-2010 |
Railway track-laying machine 铁路轨排铺轨机 |
China National Standards rack |
English PDF |
| GB 25204-2010 |
Auto tracking and targeting jet suppression system 自动跟踪定位射流灭火系统 |
China National Standards rack |
English PDF |
| GB/T 25021-2010 |
Track inspection car 轨道检查车 |
China National Standards rack |
English PDF |
| GB/T 24659.4-2009 |
Agricultural crawler tractors - Metal track - Requirement 农业履带拖拉机 金属履带板 技术条件 |
China National Standards rack |
English PDF |
| GB/T 24659.2-2009 |
Agricultural crawler tractors - Track idler - Requirement 农业履带拖拉机 驱动轮 技术条件 |
China National Standards rack |
English PDF |
| GB/T 24659.1-2009 |
Agricultural crawler tractors - Track idler - Requirement 农业履带拖拉机 导向轮 技术条件 |
China National Standards rack |
English PDF |
| GB 50161-2009 |
Safety code for design of engineering of fireworks and firecracker 烟花爆竹工程设计安全规范 |
China National Standards rack |
English PDF |
| GB/T 24522-2009 |
Metallic materials - Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳定裂纹扩展阻力的试验方法 |
China National Standards rack |
English PDF |
| GB/T 24518-2009 |
Corrosion of metals and alloys - Test methods for stress corrosion cracking in outdoor environments 金属和合金的腐蚀 应力腐蚀室外暴露试验方法 |
China National Standards rack |
English PDF |
| GB/T 24516.2-2009 |
Corrosion of metals and alloys - Atmospheric corrosion - Sun tracking exposure test methods 金属和合金的腐蚀 大气腐蚀 跟踪太阳暴露试验方法 |
China National Standards rack |
English PDF |
| GB 24426-2009 |
Fireworks and firecracker - Labeling 烟花爆竹 标志 |
China National Standards rack |
English PDF |
| GB/T 24245-2009 |
Steel cord for rubber track 橡胶履带用钢帘线 |
China National Standards rack |
English PDF |
| GB/T 23806-2009 |
Fine ceramics (advanced ceramics,advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method 精细陶瓷断裂韧性试验方法 单边预裂纹梁(SEPB)法 |
China National Standards rack |
English PDF |
| GB/T 23660-2009 |
Building structure crack split-stopping tape 建筑结构裂缝止裂带 |
China National Standards rack |
English PDF |
| GB/T 11206-2009 |
Standard test method for rubber deterioration - Surface cracking 橡胶老化试验 表面龟裂法 |
China National Standards rack |
English PDF |
| GB/T 19520.15-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分：基于连接器的插箱和插件的接口尺寸 |
China National Standards rack |
English PDF |
| GB/T 19520.12-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-101部分：插箱及其插件 |
China National Standards rack |
English PDF |
| GB/T 19290.5-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack 发展中的电子设备构体机械结构模数序列 第2-3部分：分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards rack |
English PDF |
| GB/T 21956.4-2009 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分：后置式动态试验方法 |
China National Standards rack |
English PDF |
| GB/T 22690-2008 |
General mechanical structures for data communication equipment - Cabinet and subrack 数据通信设备通用机械结构 机柜和插箱 |
China National Standards rack |
English PDF |
| GB/T 23115-2008 |
Table tennis racket 乒乓球拍 |
China National Standards rack |
English PDF |
| GB/T 22928-2008 |
Fireworks and firecrackers paper 烟花爆竹用纸 |
China National Standards rack |
English PDF |
| GB/T 22888-2008 |
Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings 皮革 物理和机械试验 表面涂层低温脆裂温度的测定 |
China National Standards rack |
English PDF |
| GB/T 22810-2008 |
Fireworks and firecracker - Rules of the inspection 烟花爆竹 检验规程 |
China National Standards rack |
English PDF |
| GB/T 22809-2008 |
Fireworks and firecracker - Rules of the inspection of safety performance 烟花爆竹 安全性能检测规程 |
China National Standards rack |
English PDF |
| GB/T 22787-2008 |
Determination of essential parameters of cryolite for use in fireworks and firecrackers 烟花爆竹用冰晶石关键指标的测定 |
China National Standards rack |
English PDF |
| GB/T 22786-2008 |
Determination of essential parameters of potassium perchlorate for use in fireworks and firecrackers 烟花爆竹用高氯酸钾关键指标的测定 |
China National Standards rack |
English PDF |
| GB/T 22785-2008 |
Determination of essential parameters of aluminum powder for use in fireworks and firecrackers 烟花爆竹用铝粉关键指标的测定 |
China National Standards rack |
English PDF |
| GB/T 22784-2008 |
Determination of essential parameters of aluminum-magnesium alloy powder for use in fireworks and firecrackers 烟花爆竹用铝镁合金粉关键指标的测定 |
China National Standards rack |
English PDF |
| GB/T 22783-2008 |
Determination of essential parameters of potassium nitrate for use in fireworks and firecrackers 烟花爆竹用硝酸钾关键指标的测定 |
China National Standards rack |
English PDF |
| GB/T 22782-2008 |
Determination of essential parameters of cuprum oxide powder for use in fireworks and firecrackers 烟花爆竹用氧化铜关键指标的测定 |
China National Standards rack |
English PDF |
| GB/T 22781-2008 |
Determination of essential parameters of titanium powder for use in fireworks and firecrackers 烟花爆竹用钛粉关键指标的测定 |
China National Standards rack |
English PDF |
| GB/T 22640-2008 |
Test method of C-Ring sample to stress-corrosion cracking for wrought aluminium and aluminium alloys products 铝合金加工产品的环形试样应力腐蚀试验方法 |
China National Standards rack |
English PDF |
| GB/T 20972.3-2008 |
Petroleum and natural gas industries - Material for use in H2S-containing environments in oil and gas production - part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys 石油天然气工业 油气开采中用于含硫化氢环境的材料 第3部分：抗开裂耐蚀合金和其他合金 |
China National Standards rack |
English PDF |
| GB/T 20972.2-2008 |
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons 石油天然气工业 油气开采中用于含硫化氢环境的材料 第2部分：抗开裂碳钢、低合金钢和铸铁 |
China National Standards rack |
English PDF |
| GB/T 1842-2008 |
Plastics - Test method for environmental stress-cracking of polyethylene 塑料 聚乙烯环境应力开裂试验方法 |
China National Standards rack |
English PDF |
| GB 13961-2008 |
Electrical supply track systems for luminaires 灯具用电源导轨系统 |
China National Standards rack |
English PDF |
| GB/T 1592.2-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 2 部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards rack |
English PDF |
| GB/T 22157-2008 |
Acoustics - Specification of test tracks for the purpose of measuring noise emitted by road vehicles 声学 用于测量道路车辆发射噪声的试验车道技术规范 |
China National Standards rack |
English PDF |
| GB/T 22162-2008 |
Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments 盘装和架装工业过程测量和控制仪表的盘面和开孔尺寸 |
China National Standards rack |
English PDF |
| GB/T 2951.41-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 41:Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon bl 电缆和光缆绝缘和护套材料通用试验方法 第41部分：聚乙烯和聚丙烯混合料专用试验方法 耐环境应力开裂试验 熔体指数测量方法 直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量 热重分 |
China National Standards rack |
English PDF |
| Find out:279Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
