Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43077.4-2023 |
Hydraulic Transmission Connections Plain Threaded Flat Ports and Stud Ends Part 4: Hexagonal screw Plug {译} 液压传动连接 普通螺纹平油口和螺柱端 第4部分：六角螺塞 |
China National Standards screw |
 English PDF |
| GB/T 17935-2023 |
screw lamp holder {译} 螺口灯座 |
China National Standards screw |
English PDF |
| GB/T 16824.1-2023 |
Hex Flange Tapping screws {译} 六角凸缘自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 15856.5-2023 |
Hex flange self-drilling self-tapping screws {译} 六角凸缘自钻自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 3098.6-2023 |
Mechanical properties of fasteners Stainless steel bolts, screws and studs {译} 紧固件机械性能 不锈钢螺栓、螺钉和螺柱 |
China National Standards screw |
English PDF |
| GB/T 70.3-2023 |
Reduced load capacity hexagon socket head screws {译} 降低承载能力內六角沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 41157.1-2022 |
Fasteners for nuclear power plants—Part 1：Bolts, screws and studs made of alloy steel 核电厂用紧固件 第1部分：合金钢螺栓、螺钉和螺柱 |
China National Standards screw |
English PDF |
| GB/T 41157.3-2022 |
Fasteners for nuclear power plants—Part 3：Bolts, screws and studs made of corrosion-resistant stainless steel 核电厂用紧固件 第3部分：不锈钢螺栓、螺钉和螺柱 |
China National Standards screw |
English PDF |
| GB/T 5796.4-2022 |
Trapezoidal screw threads—Part 4: Tolerances 梯形螺纹 第4部分：公差 |
China National Standards screw |
English PDF |
| GB/T 5796.3-2022 |
Trapezoidal screw threads—Part 3: Basic dimensions 梯形螺纹 第3部分：基本尺寸 |
China National Standards screw |
English PDF |
| GB/T 5796.2-2022 |
Trapezoidal screw threads—Part 2: General plan 梯形螺纹 第2部分：直径与螺距系列 |
China National Standards screw |
English PDF |
| GB/T 5796.1-2022 |
Trapezoidal screw threads—Part 1: Profiles 梯形螺纹 第1部分：牙型 |
China National Standards screw |
English PDF |
| GB/T 4625-2022 |
Assembly tools for screws and nuts - Nomenclature {译} 螺钉和螺母的装配工具 命名法 |
China National Standards screw |
English PDF |
| GB/Z 41983-2022 |
Hydraulic screw-in Cartridge Valve Mounting Connection Dimensions {译} 液压螺纹插装阀 安装连接尺寸 |
China National Standards screw |
English PDF |
| GB/T 38575-2021 |
Spectacle frames -- screw threads 眼镜架 螺纹 |
China National Standards screw |
English PDF |
| GB/T 39961-2021 |
Ball screw assembly -- Dimension of shaft-end type screw 滚珠丝杠副 支承结构型式尺寸 |
China National Standards screw |
English PDF |
| GB/T 24604-2021 |
Rolling bearings－Angular contact thrust ball bearings and units for machine tool screws 滚动轴承 机床丝杠用推力角接触球轴承及单元 |
China National Standards screw |
English PDF |
| GB/T 22522-2021 |
Metric series wires for measuring screw threads 测量螺纹用米制系列量针 |
China National Standards screw |
English PDF |
| GB/T 5358-2021 |
screwdriver for hexalobular socket screws 内六角花形螺钉旋具 |
China National Standards screw |
English PDF |
| GB/T 5356-2021 |
Hexagon socket screw keys 内六角扳手 |
China National Standards screw |
English PDF |
| GB/T 40565.3-2021 |
Connections for hydraulic fluid power—Quick-action couplings—Part 3:screw connection type for general purpose 液压传动连接 快换接头 第3部分：螺纹连接通用型 |
China National Standards screw |
English PDF |
| GB/T 40565.4-2021 |
Connections for hydraulic fluid power—Quick-action couplings—Part 4: screw connection type at 72 MPa 液压传动连接 快换接头 第4部分：72 MPa螺纹连接型 |
China National Standards screw |
English PDF |
| GB/T 39522-2020 |
Metric series wires for the pitch diameters of screw threads 螺纹中径米制系列量针 |
China National Standards screw |
English PDF |
| GB/T 3098.23-2020 |
Mechanical properties of fasteners—M42～M72 bolts, screws and studs 紧固件机械性能 M42～M72螺栓、螺钉和螺柱 |
China National Standards screw |
English PDF |
| GB/T 70.6-2020 |
Hexagon socket head cap screws－Fine pitch thread 内六角圆柱头螺钉 细牙螺纹 |
China National Standards screw |
English PDF |
| GB/T 2673.2-2020 |
Hexalobular socket high countersunk head screws
内六角花形高沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 39655.2-2020 |
Shipbuilding—Ship screw propellers—Manufacturing tolerances—Part 2:Propellers of diameter between 0.8m and 2.5m inclusive 造船 船用螺旋桨 制造公差 第2部分：直径在0.8m至2.5m的螺旋桨 |
China National Standards screw |
English PDF |
| GB/T 39655.1-2020 |
Shipbuilding—Ship screw propellers—Manufacturing tolerances—Part 1:Propellers of diameter greater than 2.5m 造船 船用螺旋桨 制造公差 第1部分：直径大于2.5m的螺旋桨 |
China National Standards screw |
English PDF |
| GB/T 39641-2020 |
Methods for gaging fastening screw threads by thread indicating gages 螺纹指示量规检测紧固螺纹方法 |
China National Standards screw |
English PDF |
| GB/T 3098.24-2020 |
Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications 紧固件机械性能 高温用不锈钢和镍合金螺栓、螺钉、螺柱和螺母 |
China National Standards screw |
English PDF |
| GB/T 39422-2020 |
Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure 木结构销槽承压强度及钉连接承载力特征值确定方法 |
China National Standards screw |
English PDF |
| GB/T 37751.33-2019 |
Residual current operated circuit-breakers for household and similar use—Part 3-3: Specific requirements for RCDs with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with alu 家用和类似用途的剩余电流动作断路器 第3-3部分：具有连接外部未经处理铝导线的螺纹型接线端子和连接铜或铝导线的铝制螺纹型接线端子RCD的特殊要求 |
China National Standards screw |
English PDF |
| GB/T 37751.31-2019 |
Residual current operated circuit-breakers for household and similar use—Part 3-1:Particular requirements for RCDs with screwless-type terminals for external copper conductors 家用和类似用途的剩余电流动作断路器 第3-1部分：具有连接外部铜导线的无螺纹型接线端子的RCD的特殊要求 |
China National Standards screw |
English PDF |
| GB/T 37050-2019 |
Fastening screw thread gaging systems for acceptability 紧固螺纹检测体系 |
China National Standards screw |
English PDF |
| GB/T 2673.1-2018 |
Hexalobular socket countersunk flat head screws 内六角花形沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 71-2018 |
Slotted set screws with cone point 开槽锥端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 75-2018 |
Slotted set screws with long dog point 开槽长圆柱端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 74-2018 |
Slotted set screws with cup point 开槽凹端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 83-2018 |
Square set screws with long dog point and rounded end 方头长圆柱球面端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 85-2018 |
Square set screws with long dog point 方头长圆柱端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 84-2018 |
Square set screws with cup point 方头凹端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 3227-2018 |
Assembly tools for screws and nuts—Driving squares for power socket tools 螺栓螺母用装配工具-机动套筒工具的传动四方 |
China National Standards screw |
English PDF |
| GB/T 3229-2018 |
Assembly tools for screws and nuts—Dimensions and torque testing of drive ends for hand and machine-operated screwdriver bits and connecting parts 螺栓螺母用装配工具-手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards screw |
English PDF |
| GB/T 9074.1-2018 |
Bolt or screw and washer assemblies with plain washers 螺栓或螺钉和平垫圈组合件 |
China National Standards screw |
English PDF |
| GB/T 15054.1-2018 |
Miniature screw threads—Part 1：Profiles, general plan and basic dimensions 小螺纹 第1部分：牙型、系列和基本尺寸 |
China National Standards screw |
English PDF |
| GB/T 15054.2-2018 |
Miniature screw threads—Part 2：Tolerances and limits of size 小螺纹 第2部分：公差和极限尺寸 |
China National Standards screw |
English PDF |
| GB/T 35034-2018 |
Technical specification for safety monitoring devices of screw expander (unit) 螺杆膨胀机（组）安全监视装置技术规范 |
China National Standards screw |
English PDF |
| GB/T 821-2018 |
Square set screws with chamfered end 方头平端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 86-2018 |
Square set screws with short dog point and cone end 方头短圆柱锥端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 11313.11-2018 |
Radio-frequency connectors—Part 11：Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9.5mm (0.374in) with screw coupling with characteristic impedance 50Ω (type 4.1/9.5) 射频连接器 第11部分：外导体内径为9.5mm(0.374in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(4.1/9.5型)分规范 |
China National Standards screw |
English PDF |
| GB/T 36865-2018 |
Grain and oil machinery—screw conveyer 粮油机械 螺旋输送机 |
China National Standards screw |
English PDF |
| GB/T 197-2018 |
General purpose metric screw threads—Tolerances 普通螺纹 公差 |
China National Standards screw |
English PDF |
| GB/T 11313.15-2018 |
Radio frequency connectors—Part 15: R.F.coaxial connectors with inner diameter of outer conductor 4.13mm(0.163in), characteristic impedance 50 ohms, screw coupling (Type SMA) 射频连接器 第15部分:外导体内径为4.13mm(0.163in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(SMA型) |
China National Standards screw |
English PDF |
| GB/T 34632-2017 |
The blank diameters for rolling unified screw threads 统一螺纹搓制和滚制前的毛坯直径 |
China National Standards screw |
English PDF |
| GB/T 17587.1-2017 |
Ball screws—Part 1: Vocabulary and designation 滚珠丝杠副 第1部分：术语和符号 |
China National Standards screw |
English PDF |
| GB/T 18685-2017 |
The blank diameters for rolling general purpose metric screw threads 普通螺纹搓制和滚制前的毛坯直径 |
China National Standards screw |
English PDF |
| GB/T 17587.3-2017 |
Ball screws—Part 3:Acceptance conditions and acceptance tests 滚珠丝杠副 第3部分：验收条件和验收检验 |
China National Standards screw |
English PDF |
| GB/T 2674-2017 |
Hexalobular socket raised countersunk head screws 内六角花形半沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 73-2017 |
Slotted set screws with flat point 开槽平端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 2672-2017 |
Hexalobular socket pan head screws 内六角花形盘头螺钉 |
China National Standards screw |
English PDF |
| GB/T 847-2017 |
Cross-recessed raised countersunk (oval) head tapping screws 十字槽半沉头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 5282-2017 |
Slotted pan head tapping screws 开槽盘头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 2670.3-2017 |
Hexalobular socket raised countersunk (oval) head tapping screws 内六角花形半沉头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 5283-2017 |
Slotted countersunk (flat) head tapping screws 开槽沉头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 2670.2-2017 |
Hexalobular socket countersunk head tapping screws 内六角花形沉头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 9074.18-2017 |
Tapping screw and washer assemblies with plain washers 自攻螺钉和平垫圈组合件 |
China National Standards screw |
English PDF |
| GB/T 5285-2017 |
Hexagon head tapping screws 六角头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 845-2017 |
Cross-recessed pan head tapping screws 十字槽盘头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 2671.2-2017 |
Hexalobular socket head cap screws 内六角花形圆柱头螺钉 |
China National Standards screw |
English PDF |
| GB/T 2671.1-2017 |
Hexalobular socket cheese (short) head screws 内六角花形低圆柱头螺钉 |
China National Standards screw |
English PDF |
| GB/T 5284-2017 |
Slotted raised countersunk (oval) head tapping screws 开槽半沉头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 846-2017 |
Cross-recessed countersunk (flat) head tapping screws 十字槽沉头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 2670.1-2017 |
Hexalobular socket pan head tapping screws 内六角花形盘头自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 9074.32-2017 |
Bolt or screw and washer assemblies with conical spring washers 螺栓或螺钉和锥形弹性垫圈组合件 |
China National Standards screw |
English PDF |
| GB/T 6188-2017 |
Hexalobular internal driving feature for bolts and screws 螺栓和螺钉用内六角花形 |
China National Standards screw |
English PDF |
| GB/T 35480-2017 |
Fastener—Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification 紧固件 螺栓、螺钉和螺柱预涂微胶囊型粘合层技术条件 |
China National Standards screw |
English PDF |
| GB/T 35478-2017 |
Fastener—Steel bolts,screws and studs with polyamide locking pre-coating technical specification 紧固件 螺栓、螺钉和螺柱预涂聚酰胺锁紧层技术条件 |
China National Standards screw |
English PDF |
| GB/T 32824-2016 |
Parameter series of screw expander 螺杆膨胀机（组）参数系列 |
China National Standards screw |
English PDF |
| GB/T 32534-2016 |
Test methods for taper screw threads 圆锥螺纹检测方法 |
China National Standards screw |
English PDF |
| GB/T 823-2016 |
Small pan head screws with cross recess 十字槽小盘头螺钉 |
China National Standards screw |
English PDF |
| GB/T 822-2016 |
Cheese head screws with cross recess 十字槽圆柱头螺钉 |
China National Standards screw |
English PDF |
| GB/T 819.2-2016 |
Countersunk flat head screws with cross recess—Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws 十字槽沉头螺钉 第2部分：8.8级、不锈钢及有色金属螺钉 |
China National Standards screw |
English PDF |
| GB/T 819.1-2016 |
Countersunk flat head screws with cross recess—Part 1: Property class 4.8 十字槽沉头螺钉 第1部分：4.8级 |
China National Standards screw |
English PDF |
| GB/T 818-2016 |
Pan head screws with cross recess 十字槽盘头螺钉 |
China National Standards screw |
English PDF |
| GB/T 69-2016 |
Slotted raised countersunk head screws 开槽半沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 67-2016 |
Slotted pan head screws 开槽盘头螺钉 |
China National Standards screw |
English PDF |
| GB/T 65-2016 |
Slotted cheese head screws 开槽圆柱头螺钉 |
China National Standards screw |
English PDF |
| GB/T 68-2016 |
Slotted countersunk flat head screws 开槽沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 3106-2016 |
Fasteners—Bolts,screws and studs—Nominal lengths and thread lengths 紧固件 螺栓、螺钉和螺柱 公称长度和螺纹长度 |
China National Standards screw |
English PDF |
| GB/T 3098.5-2016 |
Mechanical properties of fasteners—Tapping screws 紧固件机械性能 自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 3098.3-2016 |
Mechanical properties of fasteners—Set screws 紧固件机械性能 紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 16824.2-2016 |
Hexagon flange head tapping screws 六角法兰面自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 16824.1-2016 |
Hexagon washer head tapping screws 六角凸缘自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 20065-2016 |
screw-thread steel bars for the prestressing of concrete 预应力混凝土用螺纹钢筋 |
China National Standards screw |
English PDF |
| GB/T 32354-2015 |
Technical specification of screw expander(unit) 螺杆膨胀机（组）技术规范 |
China National Standards screw |
English PDF |
| GB/T 11313.29-2015 |
Radio frequency connectors—Part 29: Sectional specification for miniature radio frequency coaxial connector(type 1.0/2.3)with screw, snap-on, push-pull or quick-lock,slide-in （rack and panel applications）mechanism with characteristic impedance 50Ω 射频连接器 第29部分：50Ω和75Ω用特性阻抗为50Ω、具有螺纹、推拉、快锁或滑轨式机架或面板用小型射频同轴连接器（1.0/2.3型）分规范 |
China National Standards screw |
English PDF |
| GB/T 820-2015 |
Raised countersunk head screws with cross recess 十字槽半沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 70.4-2015 |
Hexagon socket button head screws with collar 内六角平圆头凸缘螺钉 |
China National Standards screw |
English PDF |
| GB/T 70.2-2015 |
Hexagon socket button head screws 内六角平圆头螺钉 |
China National Standards screw |
English PDF |
| GB/T 5276-2015 |
Fasteners—Bolts, screws, studs and nuts—Symbols and descriptions of dimensions 紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注 |
China National Standards screw |
English PDF |
| GB/T 31890-2015 |
Electronic screw weigher 电子螺旋秤 |
China National Standards screw |
English PDF |
| GB/T 11313.16-2015 |
Radio-frequency connectors—Part 16：Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristics impedance 50 Ω (75 Ω) (type N) 射频连接器 第16部分：外导体内径为7mm（0.276in）、特性阻抗为50Ω（75Ω）、螺纹连接的射频同轴连接器（N型）分规范 |
China National Standards screw |
English PDF |
| GB/T 6564.1-2014 |
Hexalobular socket head cap thread rolling screws 内六角花形圆柱头自挤螺钉 |
China National Standards screw |
English PDF |
| GB/T 6563-2014 |
Hexagon head thread rolling screws 六角头自挤螺钉 |
China National Standards screw |
English PDF |
| GB/T 6562-2014 |
Cross recessed raised countersunk head thread rolling screws 十字槽半沉头自挤螺钉 |
China National Standards screw |
English PDF |
| GB/T 6561-2014 |
Cross recessed countersunk head thread rolling screws 十字槽沉头自挤螺钉 |
China National Standards screw |
English PDF |
| GB/T 6560-2014 |
Cross recessed pan head thread rolling screws 十字槽盘头自挤螺钉 |
China National Standards screw |
English PDF |
| GB/T 3098.6-2014 |
Mechanical properties of fasteners―Stainless steel Bolts,screws and studs 紧固件机械性能 不锈钢螺栓、螺钉和螺柱 |
China National Standards screw |
English PDF |
| GB/T 3098.21-2014 |
Mechanical properties of fasteners—Stainless steel tapping screws 紧固件机械性能 不锈钢自攻螺钉 |
China National Standards screw |
English PDF |
| GB/T 3098.16-2014 |
Mechanical properties of fasteners―Stainless steel set screws 紧固件机械性能 不锈钢紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 152.5-2014 |
Fasteners―Countersinks for countersunk head wood screws 紧固件 沉头木螺钉用沉孔 |
China National Standards screw |
English PDF |
| GB/T 152.2-2014 |
Fasteners—Countersinks for countersunk head screws 紧固件 沉头螺钉用沉孔 |
China National Standards screw |
English PDF |
| GB/T 30555-2014 |
Rules for screw expander（unit）thermal acceptance test 螺杆膨胀机（组）性能验收试验规程 |
China National Standards screw |
English PDF |
| GB/T 30554-2014 |
Terminology of screw expander 螺杆膨胀机 术语 |
China National Standards screw |
English PDF |
| GB/T 14791-2013 |
screw threads―Vocabulary 螺纹 术语 |
China National Standards screw |
English PDF |
| GB/T 11313.24-2013 |
Radio frequency connectors―Part 24: Sectional specification-radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable networks (type F) 射频连接器 第24部分: 75Ω电缆分配系统用螺纹连接射频同轴连接器（F型）分规范 |
China National Standards screw |
English PDF |
| GB/T 10635-2013 |
screwdrivers - General technical requirements 螺钉旋具通用技术条件 |
China National Standards screw |
English PDF |
| GB/T 1414-2013 |
General purpose metric screw threads - The plan for pipe systems 普通螺纹 管路系列 |
China National Standards screw |
English PDF |
| GB 3883.2-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches 手持式电动工具的安全 第2部分：螺丝刀和冲击扳手的专用要求 |
China National Standards screw |
English PDF |
| GB 17464-2012 |
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included) 连接器件 电气铜导线 螺纹型和无螺纹型夹紧件的安全要求 适用于0.2 mm2以上至35 mm2（包括）导线的夹紧件的通用要求和特殊要求 |
China National Standards screw |
English PDF |
| GB/T 28703-2012 |
Test methods for parallel screw threads 圆柱螺纹检测方法 |
China National Standards screw |
English PDF |
| GB/T 28272-2012 |
Metric screw threads with extra fine pitch - Series and basic dimensions 米制超细牙螺纹 系列和基本尺寸 |
China National Standards screw |
English PDF |
| GB/T 28271-2012 |
Metric screw threads with extra fine pitch - Tolerances 米制超细牙螺纹 公差 |
China National Standards screw |
English PDF |
| GB 28242-2012 |
screw presses - Safety requirements 螺旋压力机 安全技术要求 |
China National Standards screw |
English PDF |
| GB/T 26967-2011 |
Oil injected single screw air compressor for general use 一般用喷油单螺杆空气压缩机 |
China National Standards screw |
English PDF |
| GB/T 26891-2011 |
Grain and oil machinery - Twin-screw press 粮油机械 双螺旋榨油机 |
China National Standards screw |
English PDF |
| GB/T 26883-2011 |
Grain and oil machinery - Single screw press 粮油机械 单螺旋榨油机 |
China National Standards screw |
English PDF |
| GB/T 26548.2-2011 |
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches,nutrunners and screwdrivers 手持便携式动力工具 振动试验方法 第2部分：气扳机、螺母扳手和螺丝刀 |
China National Standards screw |
English PDF |
| GB/T 9114-2010 |
Hubbed screwed steel pipe flanges 带颈螺纹钢制管法兰 |
China National Standards screw |
English PDF |
| GB/T 3098.1-2010 |
Mechanical properties of fasteners - Bolts,screws and studs 紧固件机械性能 螺栓、螺钉和螺柱 |
China National Standards screw |
English PDF |
| GB/T 25674-2010 |
screw slotting saws 螺钉槽铣刀 |
China National Standards screw |
English PDF |
| GB/T 25727-2010 |
Grain and oil machinery - screw press dehydrator 粮油机械 螺旋脱水机 |
China National Standards screw |
English PDF |
| GB/T 3098.22-2009 |
Mechanical properties of fasteners made of the fine grain non-heat treatment steel - Bolts,screws and studs 紧固件机械性能 细晶非调质钢螺栓、螺钉和螺柱 |
China National Standards screw |
English PDF |
| GB/T 24445-2009 |
Single-screw feedstuff extruder 单螺杆饲料原料膨化机 |
China National Standards screw |
English PDF |
| GB/T 24397-2009 |
screw and squeeze multifunction vermicelli machinery 螺旋挤压式多功能粉丝机 |
China National Standards screw |
English PDF |
| GB/T 3228-2009 |
Assembly tools for screws and nuts-machine-operated square drive sockets (“impact”) - Dimensions 螺栓螺母用装配工具 冲击式机动四方传动套筒的尺寸 |
China National Standards screw |
English PDF |
| GB/T 11705-2009 |
Test method for marine electric three-spindle screw pump 船用电动三螺杆泵试验方法 |
China National Standards screw |
English PDF |
| GB 1444-2008 |
Edison screw lampholders specially used for explosion-proof liminaires 防爆灯具专用螺口式灯座 |
China National Standards screw |
English PDF |
| GB/T 22679-2008 |
Electric screwdrivers 电动螺丝刀 |
China National Standards screw |
English PDF |
| GB 13140.3-2008 |
Connecting devices for low voltage circuitsfor household and similar purposes - Part 2: Particular requirements for connecting devices as separate entities with screwless-type clamping units 家用和类似用途低压电路用的连接器件 第2部分：作为独立单元的带无螺纹型夹紧件的连接器件的特殊要求 |
China National Standards screw |
English PDF |
| GB 13140.2-2008 |
Connecting devices for low voltage circuits for household and similar purposes - Part 2: Particular requirements for connecting devices as separate entities with screw-type clamping units 家用和类似用途低压电路用的连接器件 第2部分：作为独立单元的带螺纹型夹紧件的连接器件的特殊要求 |
China National Standards screw |
English PDF |
| GB/T 22763-2008 |
Electrical accessories - Big size sealed screwed plug 电器附件 大口径密封螺塞 |
China National Standards screw |
English PDF |
| GB/T 22665.2-2008 |
Measurement of vibrations at the handle of hand-held electric tools - Part 2: screwdrivers and impact wrenches 手持式电动工具手柄的振动测量方法 第2部分：螺丝刀和冲击扳手 |
China National Standards screw |
English PDF |
| GB/T 5356-2008 |
Hexagon socket screw keys 内六角扳手 |
China National Standards screw |
English PDF |
| GB/T 8464-2008 |
Cast iron and copper valves with screwed connections 铁制和铜制螺纹连接阀门 |
China National Standards screw |
English PDF |
| GB/T 22522-2008 |
Three wires for screw thread measuring 螺纹测量用三针 |
China National Standards screw |
English PDF |
| GB/T 19410-2008 |
screw refrigerant compressors 螺杆式制冷压缩机 |
China National Standards screw |
English PDF |
| GB/T 10920-2008 |
Types and dimensions of screw thread gauge and plain limit gauge 螺纹量规和光滑极限量规 型式与尺寸 |
China National Standards screw |
English PDF |
| GB/T 70.3-2008 |
Hexagon socket countersunk head screws 内六角沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 70.2-2008 |
Hexagon socket button head screws 内六角平圆头螺钉 |
China National Standards screw |
English PDF |
| GB/T 70.1-2008 |
Hexagon socket head cap screws 内六角圆柱头螺钉 |
China National Standards screw |
English PDF |
| GB/T 67-2008 |
Slotted pan head screws - Product grade A 开槽盘头螺钉 |
China National Standards screw |
English PDF |
| GB/T 6188-2008 |
Hexalobular internal driving feature for bolts and screws 螺栓和螺钉用内六角花形 |
China National Standards screw |
English PDF |
| GB/T 16938-2008 |
Fasteners - General requirements for bolts,screws,studs and nuts 紧固件 螺栓、螺钉、螺柱和螺母 通用技术条件 |
China National Standards screw |
English PDF |
| GB/T 15756-2008 |
General purpose metric screw threads - Limits of sizes 普通螺纹 极限尺寸 |
China National Standards screw |
English PDF |
| GB/T 12359-2008 |
Metric trapezoidal screw threads - Limits of sizes 梯形螺纹 极限尺寸 |
China National Standards screw |
English PDF |
| GB/T 3227-2008 |
Assembly tools for screws and nuts - Driving squares for power socket tools 螺栓螺母用装配工具 机动套筒工具的传动四方 |
China National Standards screw |
English PDF |
| GB/T 3229-2008 |
Assembly tools for screws and nuts - Drive ends for hand and machine operated screwdriver bits and connecting parts - Dimensions, torque testing 螺栓螺母用装配工具 手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards screw |
English PDF |
| GB/T 22055.2-2008 |
Microscopes - screw threads for objectives and related nosepieces - Part 2: Screw thread type M25×0.75mm 显微镜 物镜螺纹 第2部分：M25×0.75mm型物镜螺纹 |
China National Standards screw |
English PDF |
| GB/T 22055.1-2008 |
Microscopes - screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5in×1/36in) 显微镜 物镜螺纹 第1部分：RMS型物镜螺纹（4/5in×1/36in） |
China National Standards screw |
English PDF |
| GB/T 22029-2008 |
Hot-dip galvanized screw threads - On external screw threads there is the clearance for accommodating the hot-dip galvanized coat 热浸镀锌螺纹 在外螺纹上容纳镀锌层 |
China National Standards screw |
English PDF |
| GB/T 22028-2008 |
Hot-dip galvanized screw threads - On internal screw threads there is the clearance for accommodating the hot-dip galvanized coat 热浸镀锌螺纹 在内螺纹上容纳镀锌层 |
China National Standards screw |
English PDF |
| GB/T 970.2-2008 |
Circular screwing dies - Part 2: Technical specifications 圆板牙 第2部分：技术条件 |
China National Standards screw |
English PDF |
| GB/T 970.1-2008 |
Circular screwing dies - Part 1: The types and dimensions for circular screwing dies and die stocks 圆板牙 第1部分：圆板牙和圆板牙架的型式和尺寸 |
China National Standards screw |
English PDF |
| GB/T 21947-2008 |
Numerically milling machines for special screws - Testing of the accuracy 数控异型螺杆铣床 精度检验 |
China National Standards screw |
English PDF |
| GB/T 17587.5-2008 |
Ball screws - Part 5: Static and dynamic load ratings and operational life 滚珠丝杠副 第5部分：轴向额定静载荷和动载荷及使用寿命 |
China National Standards screw |
English PDF |
| GB/T 17587.4-2008 |
Ball screws - Part 4: Static axial rigidity 滚珠丝杠副 第4部分：轴向静刚度 |
China National Standards screw |
English PDF |
| GB/T 3750-2008 |
24° cone connectors - Angle swivel screw connector 卡套式铰接管接头 |
China National Standards screw |
English PDF |
| GB/T 19148.1-2008 |
Types and dimensions of lampholder - Part 1：screw lampholder 灯座的型式和尺寸 第1部分：螺口式灯座 |
China National Standards screw |
English PDF |
| GB/T 1483.1-2008 |
Gauges for lamp caps and holders - Part 1 : Gauges for screw caps and holders 灯头、灯座检验量规 第1部分：螺口式灯头、灯座的量规 |
China National Standards screw |
English PDF |
| GB/T 1406.1-2008 |
Types and dimensions of lamp caps - Part 1：screw caps 灯头的型式和尺寸 第1部分：螺口式灯头 |
China National Standards screw |
English PDF |
| GB/T 11035-2008 |
Marine electric two spindle screw pump 船用电动双螺杆泵 |
China National Standards screw |
English PDF |
| GB/T 10831-2008 |
Marine electric eccentric screw pump 船用电动单螺杆泵 |
China National Standards screw |
English PDF |
| GB 17935-2007 |
Edison screw lampholders 螺口灯座 |
China National Standards screw |
English PDF |
| GB/T 21020-2007 |
Metal cutting tools - Terms in circular screwing dies 金属切削刀具 圆板牙术语 |
China National Standards screw |
English PDF |
| GB/T 878-2007 |
Slotted headless screws with shank 开槽无头螺钉 |
China National Standards screw |
English PDF |
| GB/T 80-2007 |
hexagon socket set screws with cup point 内六角凹端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 79-2007 |
Hexagon socket set screws with dog point 内六角圆柱端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 78-2007 |
Hexagon socket set screws with cone point 内六角锥端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 77-2007 |
Hexagon socket set screws with flat point 内六角平端紧定螺钉 |
China National Standards screw |
English PDF |
| GB/T 2673-2007 |
hexalobular socket countersunk head screws 内六角花形沉头螺钉 |
China National Standards screw |
English PDF |
| GB/T 11313.4-2007 |
Radio-frequency connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器 第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards screw |
English PDF |
| GB/T 6138.2-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分：莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards screw |
English PDF |
| GB/T 6138.1-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分：直柄阶梯麻花钻的型式和尺寸 |
China National Standards screw |
English PDF |
| GB/T 20670-2006 |
Unified screw threads - General plan 统一螺纹 直径与牙数系列 |
China National Standards screw |
English PDF |
| GB/T 20669-2006 |
Unified screw threads - Profiles 统一螺纹 牙型 |
China National Standards screw |
English PDF |
| GB/T 20668-2006 |
Unified screw threads - Basic dimensions 统一螺纹 基本尺寸 |
China National Standards screw |
English PDF |
| GB/T 20667-2006 |
Unified screw threads - Limits of sizes 统一螺纹 极限尺寸 |
China National Standards screw |
English PDF |
| GB/T 20666-2006 |
Unified screw threads - Tolerances 统一螺纹 公差 |
China National Standards screw |
English PDF |
| GB/T 20636-2006 |
Connecting device - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Particular requirements for conductors above 35mm2 up to 300mm2 连接器件 电气铜导线 螺纹型和非螺纹型夹紧件的安全要求 适用于35mm2以上至300mm2导线的特殊要求 |
China National Standards screw |
English PDF |
| GB/T 20330-2006 |
Drill diameter for use prior to tapping screw threads 攻丝前钻孔用麻花钻直径 |
China National Standards screw |
English PDF |
| GB/T 20065-2006 |
screw-thread steel bars for the prestressing of concrete 预应力混凝土用螺纹钢筋 |
China National Standards screw |
English PDF |
| GB 12514.4-2006 |
Fire coupling - Part 4: Patterns and basic parameters for fire screw-type coupling 消防接口 第4部分：螺纹式消防接口型式和基本参数 |
China National Standards screw |
English PDF |
| GB/T 5796.4-2005 |
Trapezoidal screw threads-Part 4:Tolerances 梯形螺纹 第4部分：公差 |
China National Standards screw |
English PDF |
| GB/T 5796.3-2005 |
Trapezoidal screw threads-Part 3:Basic dimensions 梯形螺纹 第3部分：基本尺寸 |
China National Standards screw |
English PDF |
| GB/T 5796.2-2005 |
Trapezoidal screw threads-Part 2:General plan 梯形螺纹 第2部分：直径与螺距系列 |
China National Standards screw |
English PDF |
| GB/T 5796.1-2005 |
Trapezoidal screw threads-Part 1:Profiles 梯形螺纹 第1部分：牙型 |
China National Standards screw |
English PDF |
| GB/T 9074.5-2004 |
Cross recessed small pan head screw andwasher assemblies with plain washers 十字槽小盘头螺钉和平垫圈组合件 |
China National Standards screw |
English PDF |
| GB/T 9074.20-2004 |
Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers 十字槽凹穴六角头自攻螺钉和平垫圈组合件 |
China National Standards screw |
English PDF |
| GB/T 8124-2004 |
Tolerances and general features of gauges for metric trapezoidal screw threads 梯形螺纹量规 技术条件 |
China National Standards screw |
English PDF |
| Find out:331Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
