Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 25774.3-2023 |
Inspection of welding materials Part 3: Preparation and inspection of T-joint fillet weld specimens {译} 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验 |
China National Standards specimens |
 English PDF |
| GB/T 25774.2-2023 |
Inspection of welding materials Part 2: Preparation of mechanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel {译} 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备 |
China National Standards specimens |
English PDF |
| GB/T 25774.1-2023 |
Examination of welding materials Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals {译} 焊接材料的检验 第1部分： 钢、镍及镍合金熔敷金属力学性能试样的制备 |
China National Standards specimens |
English PDF |
| GB/Z 21223.3-2023 |
Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data {译} 老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量 |
China National Standards specimens |
English PDF |
| GB/T 462-2023 |
Paper, board and pulp Determination of moisture content of analytical specimens {译} 纸、纸板和纸浆 分析试样水分的测定 |
China National Standards specimens |
English PDF |
| GB/T 43088-2023 |
Microbeam analysis Analytical electron microscopy Method for determination of dislocation density in metallic thin crystal specimens {译} 微束分析 分析电子显微术 金属薄晶体试样中位错密度的测定方法 |
China National Standards specimens |
English PDF |
| GB/T 39482.1-2023 |
Electrochemical Impedance Spectroscopy (EIS) of Painted and Unpainted Metal specimens Part 1: Terms and Definitions {译} 涂漆和未涂漆金属试样的电化学阻抗谱（EIS） 第1部分：术语和定义 |
China National Standards specimens |
English PDF |
| GB/T 1458-2023 |
Test method for mechanical properties of fiber-wound reinforced composite ring specimens {译} 纤维缠绕增强复合材料环形试样力学性能试验方法 |
China National Standards specimens |
English PDF |
| GB/T 16865-2023 |
specimens and methods for tensile testing of deformed aluminum, magnesium and their alloy processed products {译} 变形铝、镁及其合金加工制品拉伸试验用试样及方法 |
China National Standards specimens |
English PDF |
| GB/Z 42521-2023 |
Iron ore - Acid dissolution or alkali fusion method for test specimens {译} 铁矿石 试样的酸溶解或碱熔融方法 |
China National Standards specimens |
English PDF |
| GB/T 1927.11-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of compressive strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第11部分：顺纹抗压强度测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.16-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 16: Determination of shear strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第16部分：顺纹抗剪强度测定 |
China National Standards specimens |
English PDF |
| GB/T 41654-2022 |
Corrosion of metals and alloys - Method for metallographic examination of specimens after exposure to high temperature corrosive environments {译} 金属和合金的腐蚀 在高温腐蚀环境下暴露后试样的金相检验方法 |
China National Standards specimens |
English PDF |
| GB/T 1927.15-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 15: Determination of tensile strength across grains {译} 无疵小试样木材物理力学性质试验方法 第15部分：横纹抗拉强度测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.13-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain compressive modulus of elasticity {译} 无疵小试样木材物理力学性质试验方法 第13部分：横纹抗压弹性模量测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.14-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 14: Determination of tensile strength along the grain {译} 无疵小试样木材物理力学性质试验方法 第14部分：顺纹抗拉强度测定 |
China National Standards specimens |
English PDF |
| GB/T 42266-2022 |
Flexible porous polymeric materials - Laboratory evaluation of the combustion characteristics of small specimens in the horizontal direction under a small flame {译} 柔性多孔聚合物材料 小试样在小火焰下水平方向燃烧特性的实验室评估 |
China National Standards specimens |
English PDF |
| GB/T 1927.21-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 21: Determination of nail holding force {译} 无疵小试样木材物理力学性质试验方法 第21部分：握钉力测定 |
China National Standards specimens |
English PDF |
| GB/T 41758.2-2022 |
Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties {译} 塑料 聚酮（PK）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 40314-2021 |
Corrosion of metals and alloys—Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel 金属和合金的腐蚀 适用于不锈钢平板或管状试样的碟形弹簧缝隙腐蚀构型 |
China National Standards specimens |
English PDF |
| GB/T 40302-2021 |
Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source 塑料 立式软薄试样与小火焰源接触的燃烧性能测定 |
China National Standards specimens |
English PDF |
| GB/T 1845.2-2021 |
Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 39827.2-2021 |
Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 39812-2021 |
Plastics—Preparation of test specimens by machining 塑料 试样的机加工制备 |
China National Standards specimens |
English PDF |
| GB/T 1927.20-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 20: Determination of cleavage strength 无疵小试样木材物理力学性质试验方法 第20部分：抗劈力测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.19-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 19: Determination of static hardness 无疵小试样木材物理力学性质试验方法 第19部分：硬度测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.18-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation 无疵小试样木材物理力学性质试验方法 第18部分：抗冲击压痕测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.17-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength 无疵小试样木材物理力学性质试验方法 第17部分：冲击韧性测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.12-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in compression perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.10-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in bending 无疵小试样木材物理力学性质试验方法 第10部分：抗弯弹性模量测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.9-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of bending strength 无疵小试样木材物理力学性质试验方法 第9部分：抗弯强度测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.8-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling 无疵小试样木材物理力学性质试验方法 第8部分：湿胀性测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.7-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 7: Determination of water absorption 无疵小试样木材物理力学性质试验方法 第7部分：吸水性测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.6-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 6: Determination of shrinkage 无疵小试样木材物理力学性质试验方法 第6部分：干缩性测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.5-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 5: Determination of density 无疵小试样木材物理力学性质试验方法 第5部分：密度测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.4-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 4: Determination of moisture content 无疵小试样木材物理力学性质试验方法 第4部分：含水率测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.3-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood 无疵小试样木材物理力学性质试验方法 第3部分：生长轮宽度和晚材率测定 |
China National Standards specimens |
English PDF |
| GB/T 1927.2-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 2: Sampling methods and general requirements 无疵小试样木材物理力学性质试验方法 第2部分：取样方法和一般要求 |
China National Standards specimens |
English PDF |
| GB/T 1927.1-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 1: Collection of sample tree 无疵小试样木材物理力学性质试验方法 第1部分：试材采集 |
China National Standards specimens |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards specimens |
English PDF |
| GB/T 39714.2-2020 |
Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 39690.2-2020 |
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 17037.5-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy 塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备 |
China National Standards specimens |
English PDF |
| GB/T 17037.2-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars 塑料 热塑性塑料材料注塑试样的制备 第2部分：小拉伸试样 |
China National Standards specimens |
English PDF |
| GB/T 39482.3-2020 |
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens—Part 3: Processing and analysis of data from dummy cells 涂漆和未涂漆金属试样的电化学阻抗谱（EIS） 第3部分：从模拟电解池获得数据的处理和分析 |
China National Standards specimens |
English PDF |
| GB/T 38273.2-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 37426-2019 |
Plastics—Test specimens 塑料 试样 |
China National Standards specimens |
English PDF |
| GB/T 17037.1-2019 |
Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens 塑料 热塑性塑料材料注塑试样的制备 第1部分：一般原理及多用途试样和长条形试样的制备 |
China National Standards specimens |
English PDF |
| GB/T 2423.7-2018 |
Environmental testing—Part 2：Test methods—Test Ec：Rough handling shocks，primarily for equipment—type specimens 环境试验-第2部分:试验方法-试验Ec:粗率操作造成的冲击（主要用于设备型样品） |
China National Standards specimens |
English PDF |
| GB/T 37199.2-2018 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 37194.2-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 19292.4-2018 |
Corrosion of metals and alloys—Corrosivity of atmospheres—Part 4: Determination of corrosion rate of standard specimens for the evaluation of corrosivity 金属和合金的腐蚀 大气腐蚀性 第4部分：用于评估腐蚀性的标准试样的腐蚀速率的测定 |
China National Standards specimens |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 36790-2018 |
Plastics—Polyamides—Accelerated conditioning of test specimens 塑料 聚酰胺 试样加速状态调节 |
China National Standards specimens |
English PDF |
| GB/T 34691.2-2017 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 33834-2017 |
Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens 微束分析 扫描电子显微术 生物试样扫描电子显微镜分析方法 |
China National Standards specimens |
English PDF |
| GB/T 19346.1-2017 |
Amorphous and nanocrystalline alloys measurement methods—Part 1：AC magnetic properties by the use of ring specimens 非晶纳米晶合金测试方法 第1部分：环形试样交流磁性能 |
China National Standards specimens |
English PDF |
| GB/T 13822-2017 |
Test specimens for nonferrous diecasting alloys 压铸有色合金试样 |
China National Standards specimens |
English PDF |
| GB/T 35513.2-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试 |
China National Standards specimens |
English PDF |
| GB/T 2291-2016 |
Method for preparation of coal tar pitch specimens 煤沥青实验室试样的制备方法 |
China National Standards specimens |
English PDF |
| GB/T 25774.2-2016 |
Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验 |
China National Standards specimens |
English PDF |
| GB/T 32363.2-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/Z 32075-2015 |
Non-destructive testing—Discontinuities in specimens for use in qualification examinations 无损检测 资格鉴定考试用试样中的不连续 |
China National Standards specimens |
English PDF |
| GB/T 16545-2015 |
Corrosion of metals and alloys—Removal of corrosion products from corrosion test specimens 金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除 |
China National Standards specimens |
English PDF |
| GB/T 31290-2014 |
Carbon fibre—Determination of the tensile properties of single-filament specimens 碳纤维 单丝拉伸性能的测定 |
China National Standards specimens |
English PDF |
| GB/T 5455-2014 |
Textiles―Burning behaviour―Determination of damaged Length,afterglow time and afterflame time of vertically oriented specimens 纺织品 燃烧性能 垂直方向损毁长度、阴燃和续燃时间的测定 |
China National Standards specimens |
English PDF |
| GB/T 30924.2-2014 |
Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 30815-2014 |
Surface chemical analysis―Guidelines for preparation and mounting of specimens for analysis 表面化学分析 分析样品的制备和安装方法指南 |
China National Standards specimens |
English PDF |
| GB/T 8628-2013 |
Textiles—Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change 纺织品 测定尺寸变化的试验中织物试样和服装的准备、标记及测量 |
China National Standards specimens |
English PDF |
| GB/T 3403.2-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 13454.2-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: Preparation of test specimens and determination of properties 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 28894-2012 |
Surface chemical analysis - Handling of specimens prior to analysis 表面化学分析 分析前样品的处理 |
China National Standards specimens |
English PDF |
| GB/T 27797.10-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards specimens |
English PDF |
| GB/T 25777-2010 |
Preparation methods for deposited metal specimens of chemical analysis 焊接材料熔敷金属化学分析试样制备方法 |
China National Standards specimens |
English PDF |
| GB/T 25774.3-2010 |
Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验 |
China National Standards specimens |
English PDF |
| GB/T 25774.1-2010 |
Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys 焊接材料的检验 第1部分：钢、镍及镍合金熔敷金属力学性能试样的制备及检验 |
China National Standards specimens |
English PDF |
| GB/T 15597.2-2010 |
Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 24522-2009 |
Metallic materials - Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳定裂纹扩展阻力的试验方法 |
China National Standards specimens |
English PDF |
| GB/T 5456-2009 |
Textiles - Burning behaviour - Flame spread properties of vertically oriented specimens 纺织品 燃烧性能 垂直方向试样火焰蔓延性能的测定 |
China National Standards specimens |
English PDF |
| GB/T 24148.2-2009 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties 塑料 不饱和聚酯树脂（UP-R） 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 10629-2009 |
Textiles - Preparation of laboratory test samples and test specimens for chemical testing 纺织品 用于化学试验的实验室样品和试样的准备 |
China National Standards specimens |
English PDF |
| GB/T 13760-2009 |
Geosynthetics - Sampling and preparation of test specimens 土工合成材料 取样和试样准备 |
China National Standards specimens |
English PDF |
| GB/T 8746-2009 |
Textiles - Burning behaviour - Determination of ease of ignition of vertically oriented specimens 纺织品 燃烧性能 垂直方向试样易点燃性的测定 |
China National Standards specimens |
English PDF |
| GB/T 3917.5-2009 |
Textiles - Tear properties of fabrics - Part 5: Determination of tear force of wing-shaped test specimens (Single tear method) 纺织品 织物撕破性能 第5部分：翼形试样(单缝)撕破强力的测定 |
China National Standards specimens |
English PDF |
| GB/T 3917.4-2009 |
Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) 纺织品 织物撕破性能 第4部分：舌形试样（双缝）撕破强力的测定 |
China National Standards specimens |
English PDF |
| GB/T 3917.3-2009 |
Textiles - Tear properties of fabrics - Part 3: Determination of tear force of trapezoid-shaped test specimens 纺织品 织物撕破性能 第3部分：梯形试样撕破强力的测定 |
China National Standards specimens |
English PDF |
| GB/T 3917.2-2009 |
Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) 纺织品 织物撕破性能 第2部分：裤形试样（单缝）撕破强力的测定 |
China National Standards specimens |
English PDF |
| GB/T 14495-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces 产品几何技术规范（GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块 |
China National Standards specimens |
English PDF |
| GB/T 9340-2009 |
Methods for color measurement of fluorescent specimens 荧光样品颜色的测量方法 |
China National Standards specimens |
English PDF |
| GB/T 1929-2009 |
Method of sample logs sawing and test specimens selection for physical and mechanical tests of wood 木材物理力学试材锯解及试样截取方法 |
China National Standards specimens |
English PDF |
| GB/T 22376.2-2008 |
Adhesives - Methods of preparing bulk specimens - Part 2: Elevated-temperature-curing one-part systems 胶粘剂 本体试样的制备方法 第2部分：热固化单组份体系 |
China National Standards specimens |
English PDF |
| GB/T 22376.1-2008 |
Adhesives - Methods of preparing bulk specimens - Part 1: Two-pawrt systems 胶粘剂 本体试样的制备方法 第1部分：双组份体系 |
China National Standards specimens |
English PDF |
| GB/T 12001.2-2008 |
Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 2: Preparation of test specimens and determination of properties 塑料 未增塑聚氯乙烯模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 11997-2008 |
Plastic - Multipurpose test specimens 塑料 多用途试样 |
China National Standards specimens |
English PDF |
| GB/T 9352-2008 |
Plastic - Compression moulding of test specimens of thermoplastic materials 塑料 热塑性塑料材料试样的压塑 |
China National Standards specimens |
English PDF |
| GB/T 5471-2008 |
Plastics - Compression moulding of test specimens of thermosetting materials 塑料 热固性塑料试样的压塑 |
China National Standards specimens |
English PDF |
| GB/T 2407-2008 |
Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod 塑料 硬质塑料小试样与炽热棒接触时燃烧特性的测定 |
China National Standards specimens |
English PDF |
| GB/T 22271.2-2008 |
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 1404.2-2008 |
Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties 塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 18873-2008 |
General guide of transmission electron microscope (TEM)- X-ray energy dispersive spectrometry(EDS) quantitative microanalysis for thin biological specimens 生物薄试样的透射电子显微镜-X射线能谱定量分析通则 |
China National Standards specimens |
English PDF |
| GB/T 2423.43-2008 |
Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests 电工电子产品环境试验 第2部分：试验方法 振动、冲击和类似动力学试验样品的安装 |
China National Standards specimens |
English PDF |
| GB/T 9278-2008 |
Temperatures and humidities for conditioning and testing of paint specimens 涂料试样状态调节和试验的温湿度 |
China National Standards specimens |
English PDF |
| GB/T 7732-2008 |
Metallic materials - Fracture toughness testing method with surface crack tension specimens 金属材料 表面裂纹拉伸试样断裂韧度试验方法 |
China National Standards specimens |
English PDF |
| GB/T 21461.2-2008 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 21460.2-2008 |
Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 15970.9-2007 |
Corrosion of metal and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement 金属和合金的腐蚀 应力腐蚀试验 第9部分：渐增式载荷或渐增式位移下的预裂纹试样的制备和应用 |
China National Standards specimens |
English PDF |
| GB/T 15970.6-2007 |
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement 金属和合金的腐蚀 应力腐蚀试验 第6部分：恒载荷或恒位移下的预裂纹试样的制备和应用 |
China National Standards specimens |
English PDF |
| GB/T 20310-2006 |
Textile glass-Rovings-Manufacture of test specimens and determination of tensile strength of impregnated rovings 玻璃纤维无捻粗纱 浸胶纱试样的制作和拉伸强度的测定 |
China National Standards specimens |
English PDF |
| GB/T 20120.2-2006 |
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens 金属和合金的腐蚀 腐蚀疲劳试验 第2部分：预裂纹试验裂纹扩展试验 |
China National Standards specimens |
English PDF |
| GB/T 6060.2-2006 |
Roughness comparison specimens - Ground, turned, bored, milled, shaped and planed 表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面 |
China National Standards specimens |
English PDF |
| GB/T 20417.2-2006 |
Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 1845.2-2006 |
Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 2423.36-2005 |
Environmental testing for electric and electronic products Part 2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分：试验方法 试验Z/BFc：散热和非散热试验样品的高温/振动(正弦)综合试验 |
China National Standards specimens |
English PDF |
| GB/T 2423.35-2005 |
Environmental testing for electric and electronic products Part 2:Tests Tests Z/Afc:Combined cold/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens 电工电子产品环境试验 第2部分：试验方法 试验Z/AFc：散热和非散热试验样品的低温/振动(正弦)综合试验 |
China National Standards specimens |
English PDF |
| GB/T 15970.8-2005 |
Corrosion of metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments 金属和合金的腐蚀 应力腐蚀试验 第8部分:焊接试样的制备和应用 |
China National Standards specimens |
English PDF |
| GB/T 19292.4-2003 |
Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity 金属和合金的腐蚀 大气腐蚀性 用于评估腐蚀性的标准试样的腐蚀速率的测定 |
China National Standards specimens |
English PDF |
| GB/T 6594.2-2003 |
Plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties 塑料 聚苯乙烯(PS)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 2546.2-2003 |
Plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties 塑料 聚丙烯(PP)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 18964.2-2003 |
Plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards specimens |
English PDF |
| GB/T 17037.4-2003 |
Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage 塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定 |
China National Standards specimens |
English PDF |
| GB/T 17037.3-2003 |
Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates 塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片 |
China National Standards specimens |
English PDF |
| GB/T 6461-2002 |
Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 |
China National Standards specimens |
English PDF |
| GB/T 18747.2-2002 |
The determination of shear strength of anaerobic adhesives using pin-and-collar specimens 厌氧胶粘剂剪切强度的测定(轴和套环试验法) |
China National Standards specimens |
English PDF |
| GB/T 14926.42-2001 |
Laboratory animal--Bacteriological monitoring--Collection of specimens 实验动物 细菌学检测 标本采集 |
China National Standards specimens |
English PDF |
| GB/T 15970.4-2000 |
Corrosion of metals and alloys--Stress corrosion testing--Part 4:Preparation and use of uniaxially loaded tension specimens 金属和合金的腐蚀 应力腐蚀试验 第4部分:单轴加载拉伸试样的制备和应用 |
China National Standards specimens |
English PDF |
| GB/T 15970.2-2000 |
Corrosionof metals and alloys--Stress corrosion testing--Part 2:Preparation and use of bent-beam specimens 金属和合金的腐蚀 应力腐蚀试验 第2部分:弯梁试样的制备和应用 |
China National Standards specimens |
English PDF |
| GB/T 15970.5-1998 |
Corrosion of metals and alloys--Stress corrosion testing--Part 5:Preparation and useof C-ring specimens 金属和合金的腐蚀 应力腐蚀试验 第5部分:C型环试样的制备和应用 |
China National Standards specimens |
English PDF |
| GB/T 6060.1-1997 |
Roughness comparison specimens--Cast surfaces 表面粗糙度比较样块 铸造表面 |
China National Standards specimens |
English PDF |
| GB/T 17037.1-1997 |
Injection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备 |
China National Standards specimens |
English PDF |
| GB/T 16545-1996 |
Corrosion of metals and alloys--Removal of corrosion products from corrosion test specimens 金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除 |
China National Standards specimens |
English PDF |
| GB/T 15970.3-1995 |
Corrosion of metals and alloys--Stress corrosion testing--Part 3:Preparation and use of U-bend specimens 金属和合金的腐蚀 应力腐蚀试验 第3部分:U型弯曲试样的制备和应用 |
China National Standards specimens |
English PDF |
| GB/T 2423.7-1995 |
Environmental testing for electric and electronic products--Part 2:Test methods--Test Ec and guidance:Drop and topple (Primarily for equipment-type specimens) 电工电子产品环境试验 第二部分:试验方法 试验Ec和导则:倾跌与翻倒 (主要用于设备型样品) |
China National Standards specimens |
English PDF |
| GB/T 13822-1992 |
Test specimens for non-ferrous die-casting alloys 压铸有色合金试样 |
China National Standards specimens |
English PDF |
| GB/T 2291-1980 |
Method for preparation of coal tar pitchs specimens 煤沥青试验室试样的制备方法 |
China National Standards specimens |
English PDF |
| Find out:135Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
