China National Standards

China Forgings, Industry Standards English PDF List


  •  China "Forgings," Industry Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    JB/T 14361-2023 Technical specifications for large ring Forgings of yaw ring gears for wind turbines above 2.5MW {译}
    2.5MW 以上风力发电机组偏航齿圈大型环锻件技术规范
    China Machinery Industry Standards
    Forgings,

    English PDF
    TB/T 3575.2-2022 Nondestructive testing of rolling stock steel Forgings Part 2: Penetrant testing {译}
    机车车辆锻钢件无损检测 第2部分:渗透检测
    China Railway Transport Industry Standards
    Forgings,

    English PDF
    TB/T 3575.1-2022 Nondestructive testing of rolling stock Forgings Part 1: Magnetic particle testing {译}
    机车车辆锻钢件无损检测 第1部分:磁粉检测
    China Railway Transport Industry Standards
    Forgings,

    English PDF
    TB/T 3575.3-2023 Non-destructive testing of rolling stock Forgings Part 3: Eddy current testing {译}
    机车车辆锻钢件无损检测 第3部分:涡流检测
    China Railway Transport Industry Standards
    Forgings,

    English PDF
    YS/T 1519-2022 Titanium and titanium alloy stepped shaft forgings {译}
    钛及钛合金台阶轴锻件
    China Non-ferrous Metal Industry Standards
    Forgings,

    English PDF
    SY/T 7674-2022 Oil and gas drilling equipment Marine structural steel forgings {译}
    石油天然气钻采设备 海洋用结构钢锻件
    China Oil & Gas Industry Standards
    Forgings,

    English PDF
    JB/T 14048-2021 Technical conditions of alloy steel Forgings for transmission parts of offshore platforms {译}
    海工平台传动件合金钢锻件 技术条件
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 11030-2021 Technical conditions for high and low pressure composite rotor Forgings of steam turbines {译}
    汽轮机高低压复合转子锻件 技术条件
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 11017-2021 Technical conditions of generator rotor Forgings for thermal power units of 1000MW and above {译}
    1000MW及以上火电机组发电机转子锻件 技术条件
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 14181-2021 Process specification for precision Forgings of injector housings for common rail systems{译} {译}
    共轨系统用喷油器壳体精密锻件 工艺规范
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 14180-2021 Steel automobile steering knuckle Forgings - Process specification{译} {译}
    钢质汽车转向节锻件 工艺规范
    China Machinery Industry Standards
    Forgings,

    English PDF
    NB/T 10831-2021 Specifications for mirror plate Forgings for large hydroelectric generators {译}
    大型水轮发电机镜板锻件技术条件
    China Energy Industry Standards
    Forgings,

    English PDF
    NB/T 10830-2021 Specifications for main shaft Forgings of large hydroelectric generating units {译}
    大型水轮发电机组主轴锻件技术条件
    China Energy Industry Standards
    Forgings,

    English PDF
    JB/T 6908-2020 Steel Forgings for positive displacement compressors {译}
    容积式压缩机用钢锻件
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 13850-2020 Technical requirements for automotive front axle forgings {译}
    汽车前轴锻件 技术要求
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 13849-2020 Technical requirements for precision Forgings of injector housings for common rail systems {译}
    共轨系统用喷油器壳体精密锻件 技术要求
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 13848-2020 Steel automobile steering knuckle arm Forgings - Technical requirements {译}
    钢质汽车转向节臂锻件 技术要求
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 11218-2020 Wind Power Tower Flange Forgings {译}
    风力发电塔架 法兰锻件
    China Machinery Industry Standards
    Forgings,

    English PDF
    JB/T 14012-2020 Design specification for ring rolling dies for special-shaped ring forgings {译}
    异形环锻件辗环模 设计规范
    China Machinery Industry Standards
    Forgings,

    English PDF
    NB/T 47010-2017 (Stainless steel and heat-resistant steel Forgings for pressure equipment)
    承压设备用不锈钢和耐热钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 47009-2017 (Alloy steel Forgings for low temperature pressure equipment)
    低温承压设备用合金钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 47008-2017 (Carbon steel and alloy steel Forgings for pressure equipment)
    承压设备用碳素钢和合金钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20008.28-2017 (Other materials for PWR nuclear power plants - Part 28: NS3105 alloy Forgings for safety equipment)
    压水堆核电厂用其他材料 第28部分:安全级设备用ns3105合金锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.45-2017 (Stainless steel for pressurized water reactor nuclear power plants - Part 45: Compressed elastic rings with 04Cr13Ni5Mo martensitic stainless steel forgings)
    压水堆核电厂用不锈钢 第45部分:压紧弹性环用04cr13ni5mo马氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.38-2017 (Hydraulic steel alloys for pressurized water reactors - Part 38: 19MnNiMo Forgings for core fillers)
    压水堆核电厂用合金钢 第38部分:堆芯补水箱用19mnnimo锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.37-2017 (Steel alloys for PWR nuclear power plants - Part 37: Reactor pressure vessels Non-core areas with 19MnNiMo forgings)
    压水堆核电厂用合金钢 第37部分:反应堆压力容器非堆芯区用19mnnimo锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.36-2017 (Hydraulic steel alloys for pressurized water reactors - Part 36: Reactor pressure vessel core area with 19MnNiMo forgings)
    压水堆核电厂用合金钢 第36部分:反应堆压力容器堆芯区用19mnnimo锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.43-2016 (PWR nuclear power plants with a stainless steel Part 43: reactor coolant pipes take over the seat with 022Cr17Ni12Mo2N austenitic stainless steel forgings)
    压水堆核电厂用不锈钢 第43部分:反应堆冷却剂管道接管座用022cr17ni12mo2n奥氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.40-2015 Stainless steel for pressurized water reactor nuclear power plants - Part 40: austenitic stainless steel Forgings used for reactor vessel internals
    压水堆核电厂用不锈钢 第40部分:堆内构件用奥氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.31-2015 Stainless steel for pressurized water reactor nuclear power plants - Part 31: 022Cr19Ni10 stainless steel Forgings used for containment vessel
    压水堆核电厂用不锈钢 第31部分:安全壳用022cr19ni10不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20005.31-2015 Carbon steel and low alloy steel for pressurized water reactor nuclear power plants - Part 31: 15Mn Forgings for containment vessel
    压水堆核电厂用碳钢和低合金钢 第31部分:安全壳用15mn锻件
    China Energy industry Standards
    Forgings,

    English PDF
    DL/T 1395-2014 Specification for inspection and acceptance of castings and Forgings in hydroelectric engineering
    水电工程设备铸锻件检验验收规范
    China Electricity & Power Standards
    Forgings,

    English PDF
    NB/T 20006.9-2013 Alloy steel for pressurized water reactor nuclear power plants. Part 9: Mn-Ni-Mo steel Forgings for steam generator channel head
    压水堆核电厂用合金钢 第9部分:蒸汽发生器水室封头用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 47029-2012 Aluminium and aluminium alloy Forgings for pressure vessels
    压力容器用铝及铝合金锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 47028-2012 Nickel and nickel alloy Forgings for pressure vessels
    压力容器用镍及镍合金锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.4-2012 Stainless steel for pressurized water reactor nuclear power plants. Part 4: Niobium stabilized austenitic stainless steel Forgings for the shafts of reactor coolant pumps
    压水堆核电厂用不锈钢 第4部分:反应堆冷却剂泵轴用含铌稳定化奥氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.8-2012 Alloy steel for pressurized water reactor nuclear power plants. Part 8: Mn-Ni-Mo steel Forgings for steam generator upper heads
    压水堆核电厂用合金钢 第8部分:蒸汽发生器上封头用锰-镍钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.7-2012 Alloy steel for pressurized water reactor nuclear power plants. Part 7: Mn-Ni-Mo steel Forgings for steam generators shells
    压水堆核电厂用合金钢 第7部分:蒸汽发生器筒体用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.5-2012 Alloy steel for pressurized water reactor nuclear power plants. Part 5: Mn-Ni-Mo alloy steel Forgings for reactor pressure vessel heads
    压水堆核电厂用合金钢 第5部分:反应堆压力容器封头用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.13-2012 Alloy steel for pressurized water reactor nuclear power plants. Part 13: Alloy steel Forgings for reactor coolant pump motor shaft assembles
    压水堆核电厂用合金钢 第13部分:反应堆冷却剂泵电动机轴系用合金钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 31025-2012 Ring type Forgings of wind turbine generator system
    风力发电机组 环形锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20008.1-2012 Other material for pressuriaed water reactor nuclear power plant. Part1: Alloy steel Forgings for use in reactor coolant system supports
    压水堆核电厂用其他材料 第1部分:反应堆冷却剂系统支承件用合金钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.3-2012 Stainless steel for pressurized water reactor nuclear power plants. Part 3: Controlled nitrogen content austenitic stainless steel Forgings for core upports and upper support plates
    压水堆核电厂用不锈钢 第3部分:堆芯支承件和上支承板用控氮奥氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.2-2012 Stainless steel for pressurized water reactor of nuclear power plants. Part 2: Austenitic stainless steel Forgings for class 2 and 3 tube plates of heat exchanger
    压水堆核电厂用不锈钢 第2部分:2、3级热交换器管板用奥氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.17-2012 Stainless steel for pressurized water reactor nuclear power plants. Part17: Martensitic stainless steel Forgings used for internal hold down springs
    压水堆核电厂用不锈钢 第17部分:堆内构件压紧弹性环用马氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.16-2012 Stainless steel for pressurized water reactor nuclear power plants. Part16: Class 2 and 3 martensitic stainless steel forgings
    压水堆核电厂用不锈钢 第16部分:2、3级马氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20005.3-2012 Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 3: Forgings for class 2, 3 auxiliary pump shafts
    压水堆核电厂用碳钢和低合金钢 第3部分:2、3 级辅助泵轴锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20005.2-2012 Carbon steel and low alloy steel for pressurized water reactor nuclear power plant. Part 2: Forgings for class 2, 3 heat exchanger tube plates
    压水堆核电厂用碳钢和低合金钢 第2部分:2、3级热交换器管板锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.6-2011 Alloy steel for pressurized water reactor nuclear power plants. Part 6: Mn-Ni-Mo steel Forgings for PWR steam generator tube plates
    压水堆核电厂用合金钢 第6部分:蒸汽发生器管板用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.4-2011 Alloy steel for pressurized water reactor nuclear power plants. Part 4: Mn-Ni-Mo steel Forgings for reactor pressure vessels nozzles
    压水堆核电厂用合金钢 第4部分:反应堆压力容器接管嘴用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.3-2011 Alloy steel for pressurized water reactor nuclear power plants. Part 3: Mn-Ni-Mo steel Forgings for transition rings and flanges of reactor pressure vessels
    压水堆核电厂用合金钢 第3部分: 反应堆压力容器过渡段和法兰用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.2-2011 Alloy steel for pressurized water reactor nuclear power plants. Part 2: Mn-Ni-Mo steel Forgings for reactor pressure vessel shells outside the beltline region
    压水堆核电厂用合金钢 第2部分:不承受强辐照的反应堆压力容器筒体用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.12-2011 Alloy steel for pressurized water reactor nuclear power plants. Part 12: Mn-Ni-Mo steel main flange Forgings for pressurized water reactor coolant pumps
    压水堆核电厂用合金钢 第12部分:反应堆冷却剂泵主法兰用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.1-2011 Alloy steel for pressurized water reactor nuclear power plants. Part 1: Mn-Ni-Mo steel Forgings for reactor pressure vessel shelss in the beltline region
    压水堆核电厂用合金钢 第1部分:承受强辐照的反应堆压力容器筒体用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 47010-2010 Stainless and heat-resisting steel Forgings for pressure equipment
    承压设备用不锈钢和耐热钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    SY/T 5676-2010 Technical conditions for high pressure Forgings for petroleum drilling and production machinery
    石油钻采机械产品用高压锻件技术条件
    China Oil & Gas Industry Standards
    Forgings,

    English PDF
    NB/T 47009-2010 Low-alloy steel Forgings for low temperature pressure equipment {Academic version}
    低温承压设备用低合金钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 47008-2010 Carbon and alloy steel Forgings for pressure equipment {Academic version}
    承压设备用碳素钢和合金钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20007.1-2010 Stainless steel for pressurized water reactor nuclear power plants. Part 1: Class 1, 2 and 3 austenitic stainless steel forgings
    压水堆核电厂用不锈钢 第1部分:1、2、3级奥氏体不锈钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.11-2010 Alloy steel for pressurized water reactor nuclear power plants. Part 11: Mn-Ni-Mo steel Forgings for pressurizer shells and heads
    压水堆核电厂用合金钢 第11部分:稳压器筒体、封头用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20006.10-2010 Alloy steel for pressurized water reactor nuclear power plants. Part 10: Mn-Ni-Mo steel Forgings for pressurizer and steam generator nozzles and covers
    压水堆核电厂用合金钢 第10部分:稳压器和蒸汽发生器接管嘴及盖板用锰-镍-钼钢锻件
    China Energy industry Standards
    Forgings,

    English PDF
    NB/T 20005.1-2010 Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 1: Class 1, 2, 3 forgings
    压水堆核电厂用碳钢和低合金钢 第1部分:1、2、3级锻件
    China Energy industry Standards
    Forgings,

    English PDF
    YY 0117.3-2005 Implants for surgery. Forgings, castings for bone joint prostheses. Cobalt chromium molybdenum alloy castings
    外科植入物 骨关节假体锻、铸件 钴铬钼合金铸件
    China Medicine & Medical Device Standards
    Forgings,

    English PDF
    YY 0117.2-2005 Implants for surgery. Forgings, castings for bone joint prostheses. ZTi6A14V titanium alloy castings
    外科植入物 骨关节假体锻、铸件 zti6al4v钛合金铸件
    China Medicine & Medical Device Standards
    Forgings,

    English PDF
    YY 0117.1-2005 Implants for surgery. Forgings, castings for bone joint prostheses. Ti6A14V titanium alloy forgings
    外科植入物 骨关节假体锻、铸件 ti6al4v钛合金锻件
    China Medicine & Medical Device Standards
    Forgings,

    English PDF
    DL/T 768.2-2002 Manufacture quality specification for electric power fittings forgings
    电力金具制造质量 锻制件
    China Electricity & Power Standards
    Forgings,

    English PDF
    TB/T 3014-2001 Railway alloy steel forgings
    铁道用合金钢锻件
    China Railway & Train Standards
    Forgings,

    English PDF
    QB/T 3538-1999 (Sewing Steel Forgings General technical conditions)
    缝纫机钢锻件通用技术条件
    China Light Industry Standards
    Forgings,

    English PDF
    TB/T 2944-1999 (Railway Carbon Steel Forgings)
    铁道用碳素钢锻件
    China Railway & Train Standards
    Forgings,

    English PDF
    TB/T 1569.8-1995 (Railway rolling stock on the hammer Forgings mechanical allowances and limit deviations. Black forgings)
    铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.黑皮类锻件
    China Railway & Train Standards
    Forgings,

    English PDF
    TB/T 1569.7-1995 (Railway rolling stock on the hammer Forgings mechanical allowances and limit deviations. Axis class)
    铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.光轴类
    China Railway & Train Standards
    Forgings,

    English PDF
    TB/T 1569.6-1995 (Railway rolling stock on the hammer Forgings mechanical allowances and limit deviations. Ring category)
    铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.圆环类
    China Railway & Train Standards
    Forgings,

    English PDF
    TB/T 1569.5-1995 (Railway rolling stock on the hammer Forgings mechanical allowances and limit deviations sleeve type)
    铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.套筒类
    China Railway & Train Standards
    Forgings,

    English PDF
    TB/T 1569.4-1995 (Railway rolling stock on the hammer Forgings mechanical allowances and limit deviations. Perforated disc category)
    铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.带孔圆盘类
    China Railway & Train Standards
    Forgings,

    English PDF
    TB/T 1569.3-1995 (Railway rolling stock on the hammer Forgings mechanical allowances and limit deviations. Disc type)
    铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.圆盘类
    China Railway & Train Standards
    Forgings,

    English PDF
    TB/T 1569.2-1995 (Railway rolling stock on the hammer Forgings mechanical allowances and limit deviations. Stepped shaft)
    铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.台阶轴类
    China Railway & Train Standards
    Forgings,

    English PDF
    TB/T 1569.1-1995 (Railway rolling stock on the hammer Forgings mechanical allowances and limit deviations General requirements)
    铁道机车车辆用锤上自由锻件机械加工余量与极限偏差.一般要求
    China Railway & Train Standards
    Forgings,

    English PDF

    Find out:77Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards