China National Standards

China automotive Industry Standards English PDF List


  •  China "automotive" Industry Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    JB/T 14531-2023 Technical Specifications for Progressive Dies for automotive Shock Absorber Outer Brackets {译}
    汽车减振器外支架级进模 技术规范
    China Machinery Industry Standards
    automotive

    English PDF
    YB/T 6106-2023 Cold heading steel wire rod for automotive fasteners {译}
    汽车紧固件用冷镦钢盘条
    China Metallurgy Industry Standards
    automotive

    English PDF
    QC/T 1159-2022 Standards for evaluation of green supply chain management in the automotive industry {译}
    汽车行业绿色供应链管理评价规范
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 1160-2022 Evaluation guidelines for green factories in vehicle manufacturing in the automotive industry {译}
    汽车行业整车制造绿色工厂评价导则
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 1162-2022 Honeycomb sandwich structure products for automotive exterior parts {译}
    汽车外饰件用蜂窝夹层结构制品
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 1163-2022 automotive Diesel Engine Selective Catalytic Reduction (SCR) System Reductant Filter {译}
    汽车柴油机 选择性催化还原(SCR)系统用还原剂过滤器
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 1170-2022 Functional film for automotive glass {译}
    汽车玻璃用功能膜
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 1171-2022 automotive Paint Protection Film {译}
    汽车漆面保护膜
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 1172-2022 Performance requirements and bench test methods for exhaust mufflers used in automotive air brake components {译}
    汽车气压制动部件用排气消音器性能要求及台架试验方法
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 463-2022 Technical Requirements and Bench Test Methods for automotive Torque Converter Assembly {译}
    汽车液力变矩器总成技术要求和台架试验方法
    China Automobile Industry Standards
    automotive

    English PDF
    JB/T 14396-2022 Technical specifications for powder metallurgy sliders for automotive seat adjustment mechanisms {译}
    汽车座椅调节机构用粉末冶金滑块技术规范
    China Machinery Industry Standards
    automotive

    English PDF
    JB/T 14395-2022 Technical specifications for powder metallurgy inner and outer rotors for automotive oil pumps {译}
    汽车机油泵用粉末冶金内外转子 技术规范
    China Machinery Industry Standards
    automotive

    English PDF
    QC/T 942-2021 Detection method of hexavalent chromium in automotive materials {译}
    汽车材料中六价铬的检测方法
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 1154-2021 Commutator for automotive micromotor {译}
    汽车微电机用换向器
    China Automobile Industry Standards
    automotive

    English PDF
    QC/T 1153-2021 Axial Force Test of automotive Fastening Bolts Ultrasonic Piezoelectric Ceramic Plate Method {译}
    汽车紧固连接螺栓轴力测试 超声波压电陶瓷片法
    China Automobile Industry Standards
    automotive

    English PDF
    HG/T 5988-2021 Green Design Product Evaluation Technical Specifications for Adhesives for automotive Interiors {译}
    绿色设计产品评价技术规范 汽车内饰用胶粘剂
    China Chemistry Industry Standards
    automotive

    English PDF
    JC/T 2643-2021 Green Design Product Evaluation Technical Specifications automotive Glass{译} {译}
    绿色设计产品评价技术规范 汽车玻璃
    China Building Material Industry Standards
    automotive

    English PDF
    WB/T 1112-2020 Specification for logistics labels for automotive parts {译}
    汽车制造零部件物流标签规范
    China Material Industry Standards
    automotive

    English PDF
    HG/T 5864-2021 Technical Specifications for Green Design Product Evaluation automotive Tires {译}
    绿色设计产品评价技术规范 汽车轮胎
    China Chemistry Industry Standards
    automotive

    English PDF
    QC/T 1147-2021 automotive engine electronically controlled silicone oil fan clutch {译}
    汽车发动机电控硅油风扇离合器
    China Automobile Industry Standards
    automotive

    English PDF
    JT/T 445—2021 automotive Chassis Dynamometer {译}
    汽车底盘测功机
    China Transport Industry Standards
    automotive

    English PDF
    QB/T 4674-2021 Polyurethane bundled microfiber synthetic leather for automotive interior trim{译} {译}
    汽车内装饰用聚氨酯束状超细纤维合成革
    China Light Industry Industry Standards
    automotive

    English PDF
    YS/T 1455-2021 Aluminum alloy profiles for automotive sunroof rails{译} {译}
    汽车天窗导轨用铝合金型材
    China Non-ferrous Metal Industry Standards
    automotive

    English PDF
    QC/T 1131-2020 Detection method of polycyclic aromatic hydrocarbons in automotive materials {译}
    汽车材料中多环芳烃的检测方法
    China Automobile Industry Standards
    automotive

    English PDF
    JB/T 13850-2020 Technical requirements for automotive front axle forgings {译}
    汽车前轴锻件 技术要求
    China Machinery Industry Standards
    automotive

    English PDF
    JB/T 14113-2020 Dies automotive Panel Dies Paint Marking Guidelines {译}
    冲模 汽车覆盖件冲模 涂色标识指南
    China Machinery Industry Standards
    automotive

    English PDF
    QC/T 1138-2020 automotive sliding window glass components {译}
    汽车滑动窗玻璃组件
    China Automobile Industry Standards
    automotive

    English PDF
    JB/T 13701-2019 automotive variable pump sintered rotor, eccentric ring technical conditions {译}
    汽车变量泵烧结转子、偏心环 技术条件
    China Machinery Industry Standards
    automotive

    English PDF
    QC/T 771-2017 (automotive diesel engine paper filter diesel fuel filter assembly technical conditions)
    汽车柴油机纸质滤芯柴油细滤器总成技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 5-2017 (Standardization review of automotive product design and design documents)
    汽车产品图样及设计文件标准化审查
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 4-2017 (Patterns and design documents for automotive product designs and alterations)
    汽车产品图样及设计文件采用与更改办法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 340-2017 (Hexagon flange for automotive use)
    汽车用六角法兰承面带齿螺栓
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 3-2017 (automotive product design and design document integrity)
    汽车产品图样及设计文件完整性
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 18-2017 (automotive product design and design document terminology)
    汽车产品图样及设计文件术语
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1-2017 (The basic requirements of automotive product design)
    汽车产品图样的基本要求
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1067.3-2017 (Connectors for automotive wiring harnesses and electrical equipment - Part 3: Types, dimensions and special requirements for wire connections)
    汽车电线束和电气设备用连接器 第3部分:电线接头的型式、尺寸和特殊要求
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1067.2-2017 (Connectors for automotive wiring harnesses and electrical equipment - Part 2: Types and dimensions of plug terminals)
    汽车电线束和电气设备用连接器 第2部分:插头端子的型式和尺寸
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1067.1-2017 (Connectors for automotive wiring harnesses and electrical equipment - Part 1: Definitions, test methods and general performance requirements)
    汽车电线束和电气设备用连接器 第1部分:定义、试验方法和一般性能要求
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    HG/T 5061-2016 (Paint for automotive repair)
    汽车修补用涂料
    China Chemical Industry Standards
    automotive

    English PDF
    JT/T 1050-2016 (Exterior automotive cleaning equipment)
    汽车外部清洗设备
    China Highway & Transportation Standards
    automotive

    English PDF
    QC/T 469-2016 (automotive engine valve technical conditions)
    汽车发动机气门技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 29089-2016 (automotive PVC / ABS plastic vacuum instrument panel skin)
    汽车用pvc/abs真空吸塑仪表板表皮
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 29078-2016 (automotive air compressor performance requirements and test methods of)
    汽车用空气压缩机性能要求及台架试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 16-2016 (automotive ignition coils)
    汽车用点火线圈
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1049-2016 (System matching technical requirements and test methods for automotive hydraulic rack and pinion power steering)
    汽车齿轮齿条式液压助力转向系统匹配技术要求和试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1043-2016 (automotive fuel systems use a nylon tube)
    汽车燃油系统用尼龙管
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1039-2016 (automotive air conditioning solar sensor)
    汽车空调用阳光传感器
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1035-2016 (automotive engine electronic throttle body)
    汽车发动机用电子节气门体
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1034-2016 (automotive alternator rectifier bridge)
    汽车交流发电机用整流桥
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    YD/T 3085-2016 (Based on the requirements of a public communication network interface technology of automotive information service platform and supporting car manufacturers service platform)
    基于公用通信网络的汽车信息化服务支撑平台与汽车厂商业务平台的接口技术要求
    China Telecommunication Standards
    automotive

    English PDF
    YD/T 3084-2016 (Based on public communications network interface technology of automotive information service platform and supporting the vehicle terminal requirements)
    基于公用通信网络的汽车信息化服务支撑平台与车载终端的接口技术要求
    China Telecommunication Standards
    automotive

    English PDF
    YD/T 3083-2016 (Based on the requirements of automotive information business technology public communication network)
    基于公用通信网络的汽车信息化业务技术要求
    China Telecommunication Standards
    automotive

    English PDF
    QC/T 1026-2016 Performance and determination of PVC slush skin of automotive instrument panel
    汽车聚氯乙烯搪塑仪表板表皮性能及检测
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    HG/T 4910-2016 Hot melt adhesives for paper element of automotive Part 1: adhesives for air filter
    车用纸质滤芯热熔胶 第1部分:空气滤清器热熔胶
    China Chemical Industry Standards
    automotive

    English PDF
    HG/T 4909-2016 Silicone sealants for automotive lighting
    车灯用有机硅密封胶
    China Chemical Industry Standards
    automotive

    English PDF
    QC/T 414-2016 (automotive wire (cable) and a predetermined color model designation)
    汽车电线(电缆)的颜色规定和型号编制方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    HG/T 4911-2016 Hot melt adhesive for paper element of automotive Part 2: adhesives for fuel filter
    车用纸质滤芯热熔胶 第2部分:燃油滤清器热熔胶
    China Chemical Industry Standards
    automotive

    English PDF
    NB/SH/T 0899-2015 Standard test method for measurement of effects of automotive engine oils on fuel economy of passenger cars and light-duty trucks in sequence VIB spark ignition engine
    汽车发动机油节能性能的评定 程序ⅵb法
    China Energy industry Standards
    automotive

    English PDF
    NB/SH/T 0898-2015 Standard test method for evaluation of automotive engine oils for inhibition of deposit formation in a spark-ignition internal combustion engine fueled with gasoline and operated under low-temperature, light-duty conditions
    汽车发动机油低温油泥性能的评定 程序ⅴg法
    China Energy industry Standards
    automotive

    English PDF
    NB/SH/T 0897-2015 Standard test method for evaluation of automotive engine oils in the sequence IVA spark-ignition engine
    汽车发动机油性能的评定 程序ⅳa法
    China Energy industry Standards
    automotive

    English PDF
    NB/SH/T 0896-2015 Standard test method for evaluation of automotive engine oils in the sequence ⅢG spark-ignition engine
    汽车发动机油性能的评定 程序ⅲg法
    China Energy industry Standards
    automotive

    English PDF
    QC/T 648-2015 Performance requirements and bench test methods of automotive steering tie rod assy
    汽车转向拉杆总成性能要求及台架试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 501-2015 automotive signal flasher
    汽车信号闪光器
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1021-2015 Perfomance requirements and bench test methods of ball stud assy of automotive suspension
    汽车独立悬架球头销总成性能要求及台架试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1018-2015 Step plate for automotive
    汽车用踏步板
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1015-2015 automotive air conditioner controller
    汽车空调控制器
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    JC/T 2309-2015 automotive disc brake pad natural frequency and damping test method
    机动车盘式制动块特征频率和阻尼试验方法
    China Building Materials Standards
    automotive

    English PDF
    YD/T 2886-2015 (Based on public communications networks supporting automotive information service platform for general requirements)
    基于公用通信网络的汽车信息化服务支撑平台总体要求
    China Telecommunication Standards
    automotive

    English PDF
    QC/T 998-2015 The technical specification of automotive cabin air filter
    汽车空调滤清器技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1000.2-2015 Performance requirements and test methods of non-woven on automotive filter. Part 2: Non-woven of filters for air filter
    汽车滤清器用非织布性能要求和测试方法 第2部分:空气滤清器用
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 1000.1-2015 Performance requirements and test methods of non-woven on automotive filter. Part 1: Non-woven of filters for passenger compartment
    汽车滤清器用非织布性能要求和测试方法 第1部分:乘驾室空气滤清器用
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    JT/T 938-2014 The maximum allowable values of the energy and energy efficiency grades for automotive spray booth
    汽车喷烤漆房能源消耗量限值及能源效率等级
    China Highway & Transportation Standards
    automotive

    English PDF
    JT/T 937-2014 Safety evaluation standards for automotive spray booth using
    在用汽车喷烤漆房安全评价规范
    China Highway & Transportation Standards
    automotive

    English PDF
    QC/T 985-2014 Solar reflective coated laminated automotive windshield
    汽车热反射镀膜夹层前风窗玻璃
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 984-2014 automotive glass replacement requirement
    汽车玻璃零配安装要求
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 979-2014 Waterproof vent device for protecting automotive electrical and electronics equipment
    汽车电气电子设备防护用防水透气组件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 977-2014 Specification for automotive electrical accelerator pedal module
    汽车电子油门踏板总成技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    JJF 1486-2014 Calibration Specification for Calibration Devices of Non-contact automotive Speedmeters
    非接触式汽车速度计校准装置校准规范
    China Metrological Standards
    automotive

    English PDF
    QB/T 4674-2014 Polyurethane fascicular micro-fiber synthetic leather for automotive
    汽车内饰用聚氨酯束状超细纤维合成革
    China Light Industry Standards
    automotive

    English PDF
    JC/T 2277-2014 Specification for safety glass manufacture process. Part 2: Specification for automotive safety glass manufacture process
    安全玻璃生产规程 第2部分:汽车用安全玻璃生产规程
    China Building Materials Standards
    automotive

    English PDF
    NB/SH/T 0517-2014 Standard test method for evaluation of moisture eorrosion resistance of automotive gear lubricants
    车辆齿轮油防锈性能的评定 L-33-1法
    China Energy industry Standards
    automotive

    English PDF
    QC/T 966-2014 Coating technical conditions for automotive plastic parts
    汽车塑料件涂层技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 220-2014 Technical specifications for automotive fusible links
    汽车用易熔线技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 198-2014 General technical specification for automotive switch
    汽车用开关通用技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 944-2013 The methods of polybrominated biphenyls and polybrominated diphenyl ethers in automotive materials
    汽车材料中多溴联苯(PBBs)和多溴二苯醚(PBDEs)的检测方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 326-2013 Coding rules for automotive standardized parts
    汽车标准件产品编号规则
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    HG/T 4570-2013 Waterborne automotive coatings
    汽车用水性涂料
    China Chemical Industry Standards
    automotive

    English PDF
    QB/T 4525-2013 Cleaning agent for automotive
    汽车清洗剂
    China Light Industry Standards
    automotive

    English PDF
    SJ/T 11459.2.2.1-2013 Liquid crystal display devices. Part 2-2-1:Matrix colour LCD module for automotive applications. Detail specification
    液晶显示器件 第2-2-1部分:车载用彩色矩阵液晶显示模块详细规范
    China Electronics Standards
    automotive

    English PDF
    QC/T 923-2013 Specifications of fuel prefilter assembly for automotive diesels
    汽车柴油机燃油预滤器总成技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 905-2013 Protecting facility for automotive
    汽车防护杠
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 518-2013 Tightening torque for automotive threaded fasteners
    汽车用螺纹紧固件紧固扭矩
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 48-2013 Specifications of petrol filter assembly for automotive engines with electronically controlled petrol injection system
    汽车电喷汽油机汽油滤清器总成技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    CJJ/T 71-2011 Technical code for automotive vehicle washing station
    机动车清洗站技术规范
    China Urban Construction industry Standards
    automotive

    English PDF
    QC/T 696-2011 The centralized lubrication system of automotive chassis
    汽车底盘集中润滑供油系统
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    NB/SH/T 0849-2010 Synthetic refrigerator oil for automotive air-condition
    汽车空调合成冷冻机油
    China Energy industry Standards
    automotive

    English PDF
    JT/T 783-2010 automotive air-conditioning refrigerant recovery, recycle, recharge equipment
    汽车空调制冷剂回收、净化、加注设备
    China Highway & Transportation Standards
    automotive

    English PDF
    QC/T 666-2010 automotive air conditioning (HFC-134a) - Part 1 Seals: O -shaped rubber seals
    汽车空调(hfc-134a)用密封件 第1部分: o形橡胶密封圈
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QB/T 4043-2010 Polyvinyl chloride artificial leather for automotive
    汽车用聚氯乙烯人造革
    China Light Industry Standards
    automotive

    English PDF
    QC/T 631-2009 automotive exhaust muffler assembly technical specification and test methods
    汽车排气消声器总成技术条件和试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    JT/T 324-2008 automotive spray booth
    汽车喷烤漆房
    China Highway & Transportation Standards
    automotive

    English PDF
    QC/T 275-2008 Metallographic examination of piston with ringcarrier for automotive engines
    汽车发动机镶耐磨圈活塞金相检验
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    JJF 1192-2008 Calibration Specification for automotive Suspension Tester
    汽车悬架装置检测台校准规范
    China Metrological Standards
    automotive

    English PDF
    QB/T 2971-2008 Shearling products for automotive upholstery
    汽车装饰用羊剪绒制品
    China Light Industry Standards
    automotive

    English PDF
    QC/T 798-2008 Multi-layers plastic tubing for automotive fuel system
    汽车用多层塑料燃油管
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 797-2008 Material identification and marking of automotive plastic, rubber and thermoplastic elastomer parts
    汽车塑料件、橡胶件和热塑性弹性体件的材料标识和标记
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    SH/T 0801-2007 Standard test method for determination of homogeneity and miscibility in automotive engine oils
    发动机油均匀性和混合性测定法
    China Petrochemical Industry Standards
    automotive

    English PDF
    QC/T 777-2007 automotive electromagnetic fan clutch technical conditions
    汽车电磁风扇离合器技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    JJF 1169-2007 Calibration Specification for Manipulating Force Tester for automotive Brake
    汽车制动操纵力计校准规范
    China Metrological Standards
    automotive

    English PDF
    SH/T 0788-2006 Standard test method for evaluation of automotive engine oils in the sequence Ⅷ spark-ignition engine (CLR oil test engine)
    内燃机油高温氧化和轴瓦腐蚀评定法(程序Ⅷ法)
    China Petrochemical Industry Standards
    automotive

    English PDF
    QC/T 748-2006 The bench test methods of valve-valve holder intensify abrasion for automotive engines
    汽车发动机气门—气门座强化磨损台架试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 747-2006 Specification of viscous fan clutch for automotive engines
    汽车发动机硅油风扇离合器技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 33-2006 Test methods of viscous fan clutch for automotive engines
    汽车发动机硅油风扇离合器试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 774-2006 Technical specification for electronic voltage regulator for automotive alternator
    汽车交流发电机用电子电压调节器技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 771-2006 Specifications of diesel-fuel fine filter assembly with paper element for automotive diesels
    汽车柴油机纸质滤芯柴油细滤器总成技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    SH/T 0773-2005 Standard test method for life performance of automotive wheel bearing grease
    汽车轮毂轴承润滑脂寿命特性测定法
    China Petrochemical Industry Standards
    automotive

    English PDF
    SH/T 0763-2005 Standard test method for evaluation of rust preventive characteristics of automotive engine oils (Ball rust test method)
    汽油机油防锈性评定法(BRT法)
    China Petrochemical Industry Standards
    automotive

    English PDF
    SH/T 0759-2005 Test method for evaluation of automotive engine oils for inhibition of deposit formation and wear (Sequence-ⅤE method)
    内燃机油低温油泥和抗磨损性能评定法(程序ⅤE法)
    China Petrochemical Industry Standards
    automotive

    English PDF
    SH/T 0758-2005 Test method for evaluation of automotive engine oils for inhibition of oxidization and wear under high-temperature conditions (Sequence-ⅢE method)
    内燃机油高温氧化和抗磨损性能评定法(程序ⅢE法)
    China Petrochemical Industry Standards
    automotive

    English PDF
    QB/T 2703-2005 automotive upholstery leather
    汽车装饰用皮革
    China Light Industry Standards
    automotive

    English PDF
    QC/T 731-2005 automotive starting motor specification
    汽车用起动机技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 729-2005 automotive alternator technical specification
    汽车用交流发电机技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    SH/T 0783-2005 Test method for evaluation of automotive engine oils for inhibition of oxidization and wear under high-temperature conditions (CEPT-Ⅲ method)
    内燃机油高温氧化和抗磨损性能评定法(CEPT-Ⅲ法)
    China Petrochemical Industry Standards
    automotive

    English PDF
    SN/T 1669-2005 Import and export of automotive electric cooling fan for the inspection of
    进出口汽车用电动冷却风扇检验规程
    China Import Export Inspection Standards
    automotive

    English PDF
    JT/T 634-2005 automotive front-wheel turning angle tester
    汽车前轮转向角检验台
    China Highway & Transportation Standards
    automotive

    English PDF
    JT/T 633-2005 automotive suspension and steering clearance tester
    汽车悬架转向系间隙检查仪
    China Highway & Transportation Standards
    automotive

    English PDF
    JJG(JT)063-2005 automotive Chassis Dynamometer
    China Metrological Standards
    automotive

    English PDF
    JJG(JT)062-2005 automotive Suspension Measuring Instrument
    China Metrological Standards
    automotive

    English PDF
    JJG(JT)005-2005 automotive Axles Weight Dynamic Tester
    China Metrological Standards
    automotive

    English PDF
    JJG 063-2005 automotive Chassis Dynamometer
    China Metrological Standards
    automotive

    English PDF
    JJG 062-2005 automotive Suspension Measuring Instrument
    China Metrological Standards
    automotive

    English PDF
    JJG 005-2005 automotive Axles Weight Dynamic Tester
    China Metrological Standards
    automotive

    English PDF
    HG/T 2196-2004 Standard classification system for rubber products in automotive application
    汽车用橡胶材料分类系统
    China Chemical Industry Standards
    automotive

    English PDF
    QC/T 711-2004 Test method of abrasion of flock for automotive weather-shrip
    汽车密封条植绒耐磨性试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 413-2002 Basic technical conditions of automotive electrical equipment
    汽车电气设备基本技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 288.2-2001 automotive engine cooling water pump test methods
    汽车发动机冷却水泵试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 288.1-2001 automotive engine cooling water pump conditions
    汽车发动机冷却水泵技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    SH/T 0084-2001 Standard test method for effect of cooling system chemical solutions on organic finishes for automotive vehicles
    冷却系统化学溶液对汽车上有机涂料影响的试验方法
    China Petrochemical Industry Standards
    automotive

    English PDF
    JT/T 448-2001 automotive suspension tester
    汽车悬架装置检测台
    China Highway & Transportation Standards
    automotive

    English PDF
    QC/T 670-2000 automotive synthetic brake fluid
    汽车合成制动液
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 669-2000 automotive air conditioning (HFC-134a) pipe fittings and pipe fittings
    汽车空调(HFC-134a)用管接头和管件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 665-2000 automotive air conditioning (HFC-134a) with charging interface
    汽车空调(HFC-134a)用充注接口
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 661-2000 automotive air conditioning (HFC-134a) liquid-gas separator
    汽车空调(HFC-134a)用液气分离器
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 660-2000 Compressors for automotive air conditioning (HFC-134a) test methods
    汽车空调(HFC-134a)用压缩机试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 659-2000 automotive air conditioning (HFC-134a) with logo
    汽车空调(HFC-134a)用标识
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 657-2000 automotive air conditioning and refrigeration unit test method
    汽车空调制冷装置试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 650-2000 automotive the Steering Rod Ball pin performance requirements and test methods
    汽车转向拉杆球头销性能要求及试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 299-2000 automotive power steering pump technology conditions
    汽车动力转向油泵技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 530-2000 automotive power steering assembly technical conditions
    汽车动力转向器总成技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 637-2000 automotive engine crankshaft bending fatigue strength test method
    汽车发动机曲轴弯曲疲劳强度试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 324-2000 automotive fuel air heater
    汽车燃油空气加热器
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 664-2000 automotive air conditioning (HFC-134a) with a hose and hose assemblies
    汽车空调(HFC-134a)用软管及软管组合件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 663-2000 automotive air conditioning (HFC-134a) thermal expansion valve
    汽车空调(HFC-134a)用热力膨胀阀
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 656-2000 Performance requirements of automotive air conditioning and refrigeration device
    汽车空调制冷装置性能要求
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 591-1999 (automotive diesel turbocharger test methods)
    汽车柴油机涡轮增压器试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 590-1999 (automotive Turbocharger technical conditions)
    汽车柴油机涡轮增压器技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 589-1999 (Van automotive product quality inspection and assessment methods)
    厢式汽车产品质量检验评定方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 587-1999 (Tank automotive Products Quality Inspection and Evaluation Method)
    罐式汽车产品质量检验评定方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 584-1999 (automotive Chassis Product Quality Inspection and Evaluation Method)
    汽车底盘产品质量检验评定方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    JJG(JT)021-1999 Verification Regulation of automotive Chassis DynamometerCombine Aligner
    China Metrological Standards
    automotive

    English PDF
    QC/T 580-1999 (automotive Transmission Mounting Dimensions)
    汽车变速器 安装尺寸
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 570-1999 (automotive engine cylinder liner technical conditions)
    汽车发动机气缸套 技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 558-1999 (Destructive testing of automotive engine bearing bimetallic combination)
    汽车发动机 轴瓦双金属结合强度破坏性试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 557-1999 (automotive torque converter hydraulic bench test methods for change)
    汽车用液力变扭器台架 试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 556-1999 (automotive brake temperature measurement and thermocouple mounted)
    汽车制动器 温度测量和热电偶安装
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 551-1999 (automotive engine flywheel housing mounting dimensions)
    汽车发动机 飞轮壳安装尺寸
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 550-1999 (automotive buzzer)
    汽车用蜂鸣器
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 547-1999 (automotive engine oil ring cast iron spiral spring lining technical conditions)
    汽车发动机螺旋衬簧铸铁油环技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 543-1999 (automotive diesel S size of type I screwed injector body)
    汽车柴油机“S”尺寸的I型螺纹安装喷油器体
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 542-1999 (automotive diesel S type and size of 5 or 6 Flange plate installation injector body)
    汽车柴油机“S”尺寸的5型和6型法兰或压板安装喷油器体
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 541-1999 (automotive diesel S size of type II flange or plate installed injector body)
    汽车柴油机“S”尺寸的II型法兰或压板安装喷油器体
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 540-1999 (automotive diesel S size or type 2 flange plate installed injector body)
    汽车柴油机“S”尺寸的2型法兰或压板安装喷油器体
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 521-1999 (automotive engine valve lifter technical conditions)
    汽车发动机气门挺杆技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 520-1999 (automotive brake friction material inertia test methods)
    汽车用摩阻材料惯性制动 试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 517-1999 (automotive leaf spring U-bolts and nuts with technical conditions)
    汽车钢板弹簧用U型螺栓及螺母技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 516-1999 (automotive engine shaft Waxi Ji and metallurgical standard lead-based alloys)
    汽车发动机轴瓦锡基和铅基合金 金相标准
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 512-1999 (automotive diesel fuel pump and injector cleanliness measurement methods and limits)
    汽车柴油机用喷油泵及喷油器清洁度测定方法及限值
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 511-1999 (automotive diesel injector needle Couples technical conditions)
    汽车柴油机喷油器针阀偶件技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 510-1999 (automotive diesel fuel injection pump outlet valve castings)
    汽车柴油机喷油泵出油阀偶件技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 509-1999 (automotive diesel fuel injection pump plunger technical conditions)
    汽车柴油机喷油泵柱塞偶件技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 508-1999 (automotive diesel fuel pump assembly technical conditions)
    汽车柴油机用喷油泵总成技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 506-1999 (automotive dashboard lights switch technical conditions)
    汽车用仪表灯开关技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 505-1999 (automotive headlight switch technical conditions)
    汽车用车灯开关技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 504-1999 (automotive ignition switch technical conditions)
    汽车用点火开关技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 466-1999 (Wings open style tailgate lifting and transport conditions of automotive technology)
    翼开启式栏板起重运输汽车技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 465-1999 automotive mechanical transmission terminology and definition
    汽车机械式变速器分类的术语及定义
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 454-1999 (Beekeeping automotive technical conditions)
    养蜂汽车 技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 448-1999 (Cooking automotive General technical conditions)
    炊事汽车 通用技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 438-1999 (automotive ignition system high pressure plastic parts technical conditions)
    汽车点火系高压塑料件技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 424-1999 (Electrical characteristics alternator automotive test methods)
    汽车用交流发电机电气特性试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 294-1999 (automotive Axle technical conditions)
    汽车半轴技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 293-1999 (automotive Axle bench method)
    汽车半轴台架试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 292-1999 (automotive mechanical splitter bench method)
    汽车机械式分动器台架试验方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 527-1999 (automotive engine connecting rod technical conditions)
    汽车发动机连杆 技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 291-1999 (automotive mechanical performance requirements of actuator)
    汽车机械式分动器性能要求
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 283-1999 (automotive engine piston ring wear and technical conditions inlay)
    汽车发动机镶耐磨圈活塞技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 273-1999 (automotive zinc alloy, aluminum alloy, copper alloy die castings)
    汽车用锌合金、铝合金、铜合金压铸件技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 272-1999 (automotive aluminum castings)
    汽车用铝合金铸件技术条件
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 270-1999 (automotive steel forged parts dimensions without individual tolerance limit deviations)
    汽车钢模锻造零件未注公差尺寸的极限偏差
    China Automobile & Vehicle industry Standards
    automotive

    English PDF
    QC/T 901-1998 (automotive engine products quality inspection and assessment methods)
    汽车发动机产品质量检验评定方法
    China Automobile & Vehicle industry Standards
    automotive

    English PDF

    Find out:239Items   |  To Page of: First -Previous-Next -Last  | 1 2

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards