Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| YB/T 4330-2023 |
Large diameter austenitic stainless steel seamless steel pipe {译} 大直径奥氏体不锈钢无缝钢管 |
China Metallurgy Industry
Standards diameter |
 English PDF |
| HG/T 6164.1-2023 |
Specification for large diameter flat rubber hoses for fluid transmission Part 1: Water transfer hoses {译} 流体传输用大口径扁置橡胶软管规范 第1部分：输水软管 |
China Chemistry Industry
Standards diameter |
English PDF |
| YY/T 1011-2022 |
Dentistry - Nominal diameters and designations of rotary instruments {译} 牙科学 旋转器械的公称直径和标号 |
China Pharmaceutics Industry
Standards diameter |
English PDF |
| JB/T 14372-2022 |
Small diameter 30° wedge anti-loosening thread spiral flute tap {译} 小直径30°楔形防松螺纹螺旋槽丝锥 |
China Machinery Industry
Standards diameter |
English PDF |
| SY/T 7044-2016 |
Large diameter seamless steel pipe used for submarine pipeline 海底管道用大口径无缝钢管 |
China Oil & Gas Industry
Standards diameter |
English PDF |
| NB/T 42062-2015 |
Expanded diameter steel supported aluminium stranded conductors 扩径型钢芯铝绞线 |
China Energy industry
Standards diameter |
English PDF |
| JJF 1545-2015 |
Calibration Specification for Testers for Measuring Raceway diameter and Angle of Tapered Roller Bearing Ring 圆锥滚子轴承套圈滚道直径、角度测量仪校准规范 |
China Metrological
Standards diameter |
English PDF |
| YD/T 2925-2015 |
(Routing proxy Equipment Technical Requirements based on diameter protocol) 基于diameter协议的路由代理设备技术要求 |
China Telecommunication
Standards diameter |
English PDF |
| YY/T 1011-2014 |
Dental Rotary instruments. Nominal diameters and designation code number 牙科 旋转器械-公称直径和标号 |
China Medicine & Medical Device
Standards diameter |
English PDF |
| DL/T 5318-2014 |
Construction technology guide for the tension stringing of expanded diameter conductors for overhead transmission line 架空输电线路扩径导线架线施工工艺导则 |
China Electricity & Power
Standards diameter |
English PDF |
| YY/T 1011-2014 |
Dental rotary instruments - Nominal diameter and designation{译} {译} 牙科旋转器械 公称直径和标号 |
China Pharmaceutics Industry
Standards diameter |
English PDF |
| FZ/T 20026-2013 |
Test method for fibre length and diameter of wool top and slivers. Optical analyser 毛条纤维长度和直径测试方法 光学分析仪法 |
China Textile & Garment industry
Standards diameter |
English PDF |
| QB/T 1339-2013 |
diameter series of roller and dryer for paper machine 造纸机辊筒与烘缸直径系列 |
China Light Industry
Standards diameter |
English PDF |
| JJG 1082.2-2013 |
Verification Regulation of Means of Measuring Instrument for Wheel-diameter of Railway Locomotives and Vehicles. Part 2: Means of Measuring Tools for Wheel-Diameter 铁路机车车辆轮径量具检具检定规程 第2部分：轮径测量器检具 |
China Metrological
Standards diameter |
English PDF |
| JJG 1082.1-2013 |
Verififcation Regulation of Means of Measuring Instrument for Wheel-diameter of Railway Locomotives and Vehicles. Part 1: Means of Ruler for Wheel-Diameter 铁路机车车辆轮径量具检具检定规程 第1部分：轮径尺检具 |
China Metrological
Standards diameter |
English PDF |
| JJG 1081.2-2013 |
Verification Regulation of Measuring Instrument for Wheel-diameter of Railway Locomotives and Vehicles. Part 2: Measuring Tools for Wheel-Diameter 铁路机车车辆轮径量具检定规程 第2部分：轮径测量器 |
China Metrological
Standards diameter |
English PDF |
| JJG 1081.1-2013 |
Verification Regulation of Measuring Instrument for Wheel-diameter of Railway Locomotives and Vehicles. Part 1: Ruler for Wheel-Diameter 铁路机车车辆轮径量具检定规程 第1部分：轮径尺 |
China Metrological
Standards diameter |
English PDF |
| JC/T 2063-2011 |
Determination method of diameter-thickness ratio in mica powder 云母粉径厚比测定方法 |
China Building Materials
Standards diameter |
English PDF |
| JTS 167-6-2011 |
Port engineering technical code of design and construction for large diameter post tensioned prestress concrete cylinder pile 港口工程后张法预应力混凝土大管桩设计与施工规程 |
China Highway & Transportation
Standards diameter |
English PDF |
| YD/T 2287-2011 |
Insulated wines with conductor diameter below 0.8 mm 导体直径在0.8mm及以下的绝缘电线 |
China Telecommunication
Standards diameter |
English PDF |
| YD/T 2160.2-2010 |
Coaxial cables with insulation diameter below 1mm and cable assemblies. Part 2: Cable assemblies 绝缘外径在1mm以下的同轴电缆及组件 第2部分：组件 |
China Telecommunication
Standards diameter |
English PDF |
| YD/T 2160.1-2010 |
Coaxial cables with insulation diameter below 1mm and cable assemblies. Part 1: Cables 绝缘外径在1mm以下的同轴电缆及组件 第1部分：电缆 |
China Telecommunication
Standards diameter |
English PDF |
| JGJ/T 225-2010 |
Technical specification for large-diameter belled cast-in-place pile foundation 大直径扩底灌注桩技术规程 |
China Building & Construction
Standards diameter |
English PDF |
| SN/T 2672-2010 |
Textile raw materials fineness testing method (diameter). Micro projection 纺织原料细度试验方法（直径） 显微投影仪法 |
China Import Export Inspection
Standards diameter |
English PDF |
| JGJ/T 213-2010 |
Technical specification for composite foundation of cast-in-place concrete large-diameter pipe pile 现浇混凝土大直径管桩复合地基技术规程 |
China Building & Construction
Standards diameter |
English PDF |
| JJF 1250-2010 |
Calibration specification for laser diameter measuring gauges 激光测径仪校准规范 |
China Metrological
Standards diameter |
English PDF |
| DL/T 1105.4-2010 |
The technical guideline of non-destructive inspection for fillet welds of small diameter nozzle stubs on boiler headers in power stations. Part 4: Magnetic memory metal diagnostic technique 电站锅炉集箱小口径接管座角焊缝 无损检测技术导则 第4部分：磁记忆检测 |
China Electricity & Power
Standards diameter |
English PDF |
| DL/T 1105.3-2010 |
The technical guideline of non-destructive inspection for fillet welds of small diameter nozzle stubs on boiler headers in power stations. Part 3: Eddy current testing 电站锅炉集箱小口径接管座角焊缝 无损检测技术导则 第3部分：涡流检测 |
China Electricity & Power
Standards diameter |
English PDF |
| DL/T 1105.2-2010 |
The technical guideline of non-destructive inspection for fillet welds of small diameter nozzle stubs on boiler headers in power stations. Part 2: Ultrasonic testing 电站锅炉集箱小口径接管座角焊缝 无损检测技术导则 第2部分：超声检测 |
China Electricity & Power
Standards diameter |
English PDF |
| YY/T 0727.3-2009 |
Implants for surgery. Metal intramedullary nailing systems. Part 3: Connection devices and reamer diameter measurements 外科植入物 金属髓内钉系统 第3部分：连接器械及髓腔扩大器直径的测量 |
China Medicine & Medical Device
Standards diameter |
English PDF |
| DL/T 1105.1-2009 |
The technical guideline of non-destructive inspection for fillet of small diameter nozzle stubs on boiler headers in power stations. Part 1: General requirements 电站锅炉集箱小口径接管座角焊缝无损检测技术导则 第1部分：通用要求 |
China Electricity & Power
Standards diameter |
English PDF |
| JJG 785-2009 |
Verification Regulation of Deep Groove Ball Bearing Ring Raceway diameter and Position Measuring Instrument 深沟球轴承套圈滚道直径、位置测量仪检定规程 |
China Metrological
Standards diameter |
English PDF |
| HG/T 20623-2009 |
Large diameter steel pipe flanges (PN designated) 大直径钢制管法兰（Class系列） |
China Chemical Industry
Standards diameter |
English PDF |
| HG/T 3796.2-2005 |
Series of agitator shaft diameters 搅拌轴轴径系列 |
China Chemical Industry
Standards diameter |
English PDF |
| YD/T 1469-2006 |
Technical Requirements for diameter Base Protocol in IP Network (IETF RFC 3588: 2003, Diameter Base Protocol, MOD) 用于ip网络的diameter基础协议技术要求 |
China Telecommunication
Standards diameter |
English PDF |
| YY/T 1058-2004 |
Instruments for surgery. Length, width, thickness and rivet diameter of box joint 手术器械鳃部的长度、宽度、厚度和轴直径 |
China Medicine & Medical Device
Standards diameter |
English PDF |
| QC/T 726-2004 |
Test method for calibrated diameter of motorcycles and mopeds rims using even strap ruler 摩托车和轻便摩托车轮辋标定直径检验方法 平带尺检验方法 |
China Automobile & Vehicle industry
Standards diameter |
English PDF |
| QC/T 725-2004 |
Test method for calibrated diameter of motorcycles and mopeds rims using sphere-string ruler 摩托车和轻便摩托车轮辋标定直径检验方法 球带尺检验方法 |
China Automobile & Vehicle industry
Standards diameter |
English PDF |
| JJG 471-2003 |
Verification Regulation of Bearing Inside and Outside diameter Testers 轴承内、外径检查仪检定规程 |
China Metrological
Standards diameter |
English PDF |
| JJG(TZ)111-2002 |
(Dedicated railway rolling stock wheel diameter measuring test procedures) |
China Metrological
Standards diameter |
English PDF |
| JJG 111-2002 |
Railway rolling stock wheel diameter special measuring tools VRof |
China Metrological
Standards diameter |
English PDF |
| TB/T 3015.4-2001 |
The overall railway vehicle wheel Dimensions the inspection gages technology conditions. Hub outside diameter caliper 铁道车辆整体车轮外形尺寸检测量具技术条件 轮毂外径卡尺 |
China Railway & Train
Standards diameter |
English PDF |
| TB/T 3015.2-2001 |
The overall railway vehicle wheel Dimensions the inspection gages technology conditions rim diameter caliper 铁道车辆整体车轮外形尺寸检测量具技术条件 轮辋内径卡尺 |
China Railway & Train
Standards diameter |
English PDF |
| TB/T 3015.1-2001 |
The overall railway vehicle wheels Dimensions inspection gages conditions. Rolling circle diameter caliper 铁道车辆整体车轮外形尺寸检测量具技术条件 滚动圆直径卡尺 |
China Railway & Train
Standards diameter |
English PDF |
| YY/T 91058-1999 |
Instruments for surgery. Width, thickness and rivet diameter of box joint |
China Medicine & Medical Device
Standards diameter |
English PDF |
| QB/T 2314-1997 |
(Watch Dial diameter nail series) 手表表盘钉直径尺寸系列 |
China Light Industry
Standards diameter |
English PDF |
| SJ 50973/6-1997 |
Cable, radio frequency, coaxial, semirigid, 1.19mm diameter, 50Ω, type SFT-50-1-52, detail specification for sft-50-1-52型50ω、直径1.19mm半硬射频同轴电缆详细规范 |
China Electronics
Standards diameter |
English PDF |
| SJ 20636-1997 |
Test method for oxygen and carbon contents of large diameter thin silicon wafer in microzone for use in IC ic用大直径薄硅片的氧、碳含量微区试验方法 |
China Electronics
Standards diameter |
English PDF |
| JTJ/T 261-1997 |
Port engineening technical code of design and constraction for large diameter post tensioned prestress concrete cylinder pile |
China Highway & Transportation
Standards diameter |
English PDF |
| SJ 50973/5-1996 |
Cable, radio frequency, coaxial, semirigid, 0.86mm diameter, 50Ω, type SFT-50-1-51, detail specification for sft-50-1-51型50ω、直径0.86mm半硬射频同轴电缆详细规范 |
China Electronics
Standards diameter |
English PDF |
| JJG 380-1995 |
Verification Regulation of Instruments for Measuring the diameter, Angle and Straightness of Bearing Tapered Roller 轴承圆锥滚子直径、角度、直线度测量仪检定规程 |
China Metrological
Standards diameter |
English PDF |
| HG/T 21573.3-1995 |
(High pressure hydraulic bolt tightening bolts and nuts large diameter devices) 大直径螺母 |
China Chemical Industry
Standards diameter |
English PDF |
| HG/T 21573.2-1995 |
(Hydraulic high pressure bolt and bolt tightening device large diameter stud) 大直径双头螺柱 |
China Chemical Industry
Standards diameter |
English PDF |
| FZ/T 92052-1995 |
(Ring spindle bearing diameter Φ12mm) 轴承内径φ12mm环锭锭子 |
China Textile & Garment industry
Standards diameter |
English PDF |
| FZ/T 92053-1995 |
(Ring spindle bearing diameter Φ10mm) 轴承内径Φ10mm环锭锭子 |
China Textile & Garment industry
Standards diameter |
English PDF |
| JJG 896-1995 |
Verification Regulation of Characterization Systems for the Loss and Mode Field diameter of Optical Fiber 光纤损耗和模场直径测量仪 |
China Metrological
Standards diameter |
English PDF |
| HG/T 20537.4-1992 |
(Chemical plant large-diameter welded austenitic stainless steel technical requirements) 化工装置用奥氏体不锈钢大口径焊接钢管技术要求 |
China Chemical Industry
Standards diameter |
English PDF |
| SJ 20142-1992 |
Specification for military Winchester disk unit of 80mm outer diameter 军用集成电路用微晶玻璃基片 |
China Electronics
Standards diameter |
English PDF |
| DL 473-1992 |
Technical conditions for forged tee joints with high diameters 大直径三通锻件技术条件 |
China Electricity & Power
Standards diameter |
English PDF |
| JJG(JB)85-1992 |
(Tapered roller diameter, angle, linear meter verification procedures) |
China Metrological
Standards diameter |
English PDF |
| JJG(JB)82-1992 |
(D802, D803, D804 type thrust ball bearing washers groove diameter measuring instrument verification procedures) |
China Metrological
Standards diameter |
English PDF |
| JJG(JB)81-1992 |
Specification for verification of measurement meters of groove diameter and groove position of inner ring and outer ring of deep groove ball bearings and angular contact ball bearings |
China Metrological
Standards diameter |
English PDF |
| SJ/T 10171.10-1991 |
Measurement methods for performances of separator of alkaline batteries--Determination of maximum Pore diameter in separator. Bubble test 碱性蓄电池隔膜性能测试方法 隔膜最大孔直径的测定 气泡试验法 |
China Electronics
Standards diameter |
English PDF |
| SY 5279.1-1991 |
(Oil wellhead rated working pressure and nominal diameter range) |
China Oil & Gas Industry
Standards diameter |
English PDF |
| JJG 670-1990 |
Verification Regulation of Tape for Measuring Circumference and diameter of Flexible Part 柔性周径尺检定规程 |
China Metrological
Standards diameter |
English PDF |
| JJG(JB)22-1990 |
(Tapered roller bearing raceway diameter and angle tester test procedures) |
China Metrological
Standards diameter |
English PDF |
| JJG(JB)21-1990 |
(Ball diameter tester test procedures) |
China Metrological
Standards diameter |
English PDF |
| JJG(JB)17-1990 |
(Nominal diameter 15 ~ 40mm cold water accelerated wear test device test procedures) |
China Metrological
Standards diameter |
English PDF |
| JJG(JB)16-1990 |
(Nominal diameter 15 ~ 40mm cold water pressure loss test device test procedures) |
China Metrological
Standards diameter |
English PDF |
| JJG(QJ)32-1987 |
(Siwei Comparison test procedures in diameter) |
China Metrological
Standards diameter |
English PDF |
| HG/T 3167-1986 |
Lines of agitator shaft diameters |
China Chemical Industry
Standards diameter |
English PDF |
| Find out:71Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
