China GB Standards list issued in 2010 year |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 25316-2010 |
Static shore power supply (SPS) system 静止式岸电装置 |
China National Standards 2010 |
English PDF |
GB/T 25315-2010 |
Home control systems - Guidelines relating to safety 家庭控制系统 安全导则 |
China National Standards 2010 |
English PDF |
GB/T 25314-2010 |
Requirements of corrosion management program for mechanical equipment in nuclear power plants 核电厂机械设备腐蚀管理大纲内容要求 |
China National Standards 2010 |
English PDF |
GB/T 25313-2010 |
The standardization for the evaluation of electromagnetic field distribution of welding equipment 焊接设备电磁场检测与评估准则 |
China National Standards 2010 |
English PDF |
GB/T 25312-2010 |
The standardization for the evaluation of welder exposure to electromagnetic field of welding equipment 焊接设备电磁场对操作人员影响程度的评价准则 |
China National Standards 2010 |
English PDF |
GB/T 25311-2010 |
Stationary resistance butt welding machines 固定式对焊机 |
China National Standards 2010 |
English PDF |
GB/T 25310-2010 |
Stationary spot welding machines and projection welding machines 固定式点、凸焊机 |
China National Standards 2010 |
English PDF |
GB/T 25309-2010 |
High-voltage direct current transfer switches 高压直流转换开关 |
China National Standards 2010 |
English PDF |
GB/T 25308-2010 |
D.C. Filters for HVDC transmission system 高压直流输电系统直流滤波器 |
China National Standards 2010 |
English PDF |
GB/T 25307-2010 |
High-voltage direct current by-pass switches 高压直流旁路开关 |
China National Standards 2010 |
English PDF |
GB/T 25306-2010 |
Standard of electron accelerator facility engineering for radiation processing 辐射加工用电子加速器工程通用规范 |
China National Standards 2010 |
English PDF |
GB/T 25305-2010 |
Seam welding machines 缝焊机 |
China National Standards 2010 |
English PDF |
GB/T 25304-2010 |
Specific requirements for non-vascular self-expanding metallic stents 非血管自扩张金属支架专用要求 |
China National Standards 2010 |
English PDF |
GB/T 25303-2010 |
Specification for high efficiency permanent magnet synchronous motor for textile purpose(Frame size 90~225) 纺织专用高效率永磁同步电动机技术条件 (机座号 90~225) |
China National Standards 2010 |
English PDF |
GB/T 25302-2010 |
Specification for high efficiency three-phase induction motor for textile purpose (Frame size 90~225) 纺织专用高效率三相异步电动机技术条件 (机座号90~225) |
China National Standards 2010 |
English PDF |
GB/T 25301-2010 |
Resistance welding equipment - General specifications applicable to all transformers 电阻焊设备 适用于所有变压器的通用技术条件 |
China National Standards 2010 |
English PDF |
GB/T 25300-2010 |
Resistance welding equipment - Particular specfications applicable to transformers with one secondary winding for multi-spot welding, as used in the automobile industry 电阻焊设备 汽车工业中使用的具有一个次级线圈的多点焊变压器特殊技术条件 |
China National Standards 2010 |
English PDF |
GB/T 25299-2010 |
Resistance welding equipment - Particular specfications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry 电阻焊设备 汽车工业中使用的具有两个独立次级线圈的多点焊变压器特殊技术条件 |
China National Standards 2010 |
English PDF |
GB/T 25298-2010 |
The general specifications for resistance welding controller 电阻焊机控制器 通用技术条件 |
China National Standards 2010 |
English PDF |
GB/T 25297.2-2010 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes 电阻点焊 电极接头,外锥度1:10 第2部分:末端插入式圆柱柄配合 |
China National Standards 2010 |
English PDF |
GB/T 25296-2010 |
Guidelines on general tests for safety of electrical equipments 电气设备安全通用试验导则 |
China National Standards 2010 |
English PDF |
GB/T 25295-2010 |
Guidelines on safety designs for electric equipments 电气设备安全设计导则 |
China National Standards 2010 |
English PDF |
GB/T 25294-2010 |
General technical requirements for cabinets of synthesized control equipments in electrical power system 电力综合控制机柜通用技术要求 |
China National Standards 2010 |
English PDF |
GB/T 25293-2010 |
Mechanical door lock for cabinets of electrotechnical and electronic equipment 电工电子设备机柜 机械门锁 |
China National Standards 2010 |
English PDF |
GB/T 25292-2010 |
Specification for direct current machine in ships 船用直流电机技术条件 |
China National Standards 2010 |
English PDF |
GB/T 25291-2010 |
Specification for three-phase constant torque asynchronous motor for cargo winches in ships 船用起货机用恒力矩三相异步电动机技术条件 |
China National Standards 2010 |
English PDF |
GB/T 25290-2010 |
Specification for Y3 series(IP55)three-phase induction motor (Frame size 63~355) Y3系列(IP55)三相异步电动机技术条件(机座号63~355) |
China National Standards 2010 |
English PDF |
GB/T 25289-2010 |
Specification and technical requirements for 20kV oil-immersed distribution transformers 20kV油浸式配电变压器技术参数和要求 |
China National Standards 2010 |
English PDF |
GB/T 25288-2010 |
188W-188Re chromatographic generator 188W-188Re色层发生器 |
China National Standards 2010 |
English PDF |
GB/T 19520.17-2010 |
Mechanical structures for electronic equipment - Dimension of mechanical structures of the 482.6 mm(19 in)series - Part 3-105: Dimensions and design aspects for 1U high chassis 电子设备机械结构 482.6mm“(19in)系列机械结构尺寸 第3-105部分:1U高度机箱的尺寸和设计要求 |
China National Standards 2010 |
English PDF |
GB/T 16927.3-2010 |
High-voltage test techniques - Part3: Definitions and requirements for on-site testing 高电压试验技术 第3部分: 现场试验的定义及要求 |
China National Standards 2010 |
English PDF |
GB/T 16896.2-2010 |
Digital recorders for measurements in high-voltage impulse tests - Part 2: software requirement 高电压冲击测量仪器和软件 第2部分: 软件的要求 |
China National Standards 2010 |
English PDF |
GB/T 16676-2010 |
Specification of alarm and monitoring network system for bank security and protection 银行安全防范报警监控联网系统技术要求 |
China National Standards 2010 |
English PDF |
GB/T 15474-2010 |
Classification on instrumentation and control function of instrumentation and control systems important to safety for nuclear power plants 核电厂安全重要仪表和控制功能分类 |
China National Standards 2010 |
English PDF |
GB/T 14598.9-2010 |
Measuring relays and protection equipment - Part 22-3:Electrical disturbance tests - Radiated electromagnetic field immunity 量度继电器和保护装置 第22-3部分:电气骚扰试验 辐射电磁场抗扰度 |
China National Standards 2010 |
English PDF |
GB/T 14598.14-2010 |
Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests 量度继电器和保护装置 第22-2部分:电气骚扰试验--静电放电试验 |
China National Standards 2010 |
English PDF |
GB/T 14597-2010 |
Environmental climatic conditions appearing in different altitudes for electrical products 电工产品不同海拔的气候环境条件 |
China National Standards 2010 |
English PDF |
GB/T 13627-2010 |
Criteria for accident monitoring instrumentation for nuclear power generating stations 核电厂事故监测仪表准则 |
China National Standards 2010 |
English PDF |
GB/T 13165-2010 |
Methods of measurement on noise emitted by arc welding machine 电弧焊机噪声测定方法 |
China National Standards 2010 |
English PDF |
GB/T 12162.4-2010 |
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分:低能X射线参考辐射场中场所和个人剂量仪的校准 |
China National Standards 2010 |
English PDF |
GB/T 10249-2010 |
The organization for electric welding machine model 电焊机型号编制方法 |
China National Standards 2010 |
English PDF |
GB 811-2010 |
Helmets for motorcyclists 摩托车乘员头盔 |
China National Standards 2010 |
English PDF |
GB 25280-2010 |
Road traffic signal controller 道路交通信号控制机 |
China National Standards 2010 |
English PDF |
GB 17566-2010 |
Muster list for seagoing transport merchant ship 海洋运输船舶应变部署表 |
China National Standards 2010 |
English PDF |
GB/T 25352-2010 |
Test method to determine the burnthrough resistance of thermal/acoustic insulation materials 隔热隔音材料耐烧穿试验方法 |
China National Standards 2010 |
English PDF |
GB/T 8190.9-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards 2010 |
English PDF |
GB/T 8190.4-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications 往复式内燃机 排放测量 第4部分:不同用途发动机的稳态试验循环 |
China National Standards 2010 |
English PDF |
GB/T 8190.1-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions 往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量 |
China National Standards 2010 |
English PDF |
GB/T 8190.10-2010 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第10部分:压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程 |
China National Standards 2010 |
English PDF |
GB/T 7417-2010 |
AX Series relays for railway signaling 铁路信号AX系列继电器 |
China National Standards 2010 |
English PDF |
GB/T 6902-2010 |
Test methods for railway signal relays 铁路信号继电器试验方法 |
China National Standards 2010 |
English PDF |
GB/T 6809.8-2010 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems 往复式内燃机 零部件和系统术语 第8部分:起动系统 |
China National Standards 2010 |
English PDF |
GB/T 6809.5-2010 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems 往复式内燃机 零部件和系统术语 第5部分:冷却系统 |
China National Standards 2010 |
English PDF |
GB/T 6118-2010 |
End mills - Technical specifications 立铣刀技术条件 |
China National Standards 2010 |
English PDF |
GB/T 6117.3-2010 |
End mills - Part 3: Milling cutters with 7:24 taper shanks 立铣刀 第3部分:7:24锥柄立铣刀 |
China National Standards 2010 |
English PDF |
GB/T 6117.2-2010 |
End mills - Part 2: Milling cutters with morse taper shanks 立铣刀 第2部分:莫氏锥柄立铣刀 |
China National Standards 2010 |
English PDF |
GB/T 6117.1-2010 |
End mills - Part 1: Milling cutters with parallel shanks 立铣刀 第1部分:直柄立铣刀 |
China National Standards 2010 |
English PDF |
GB/T 5869-2010 |
Lifejacket lights 救生衣灯 |
China National Standards 2010 |
English PDF |
GB/T 5772-2010 |
Injector nozzle for diesel - Specifications 柴油机喷油嘴偶件 技术条件 |
China National Standards 2010 |
English PDF |
GB/T 5771-2010 |
Delivery valve of diesel fuel injection pump - Specifications 柴油机喷油泵出油阀偶件 技术条件 |
China National Standards 2010 |
English PDF |
GB/T 5264-2010 |
plunger of diesel fuel injection pump - Specifications 柴油机喷油泵柱塞偶件 技术条件 |
China National Standards 2010 |
English PDF |
GB/T 25430-2010 |
Specification for drill through equipment - Rotating control devices 钻通设备 旋转防喷器规范 |
China National Standards 2010 |
English PDF |
GB/T 25429-2010 |
Specification for drill string non-return valve 钻具止回阀规范 |
China National Standards 2010 |
English PDF |
GB/T 25424-2010 |
Tractors and machinery for agricultural and forestry - Windowscreen wiper 农林拖拉机和机械 风挡玻璃雨刷器 |
China National Standards 2010 |
English PDF |
GB/T 25423-2010 |
Rectangular bale baler 方草捆打捆机 |
China National Standards 2010 |
English PDF |
GB/T 25422-2010 |
Subsoiling plow for grassland 草地潜松犁 |
China National Standards 2010 |
English PDF |
GB/T 25421-2010 |
No-tillage seeding drill for the grass 牧草免耕播种机 |
China National Standards 2010 |
English PDF |
GB/T 25420-2010 |
Actuates the rake 驱动耙 |
China National Standards 2010 |
English PDF |
GB/T 25419-2010 |
Pneumatic pruning machine for fruit trees 气动果树剪枝机 |
China National Standards 2010 |
English PDF |
GB/T 25418-2010 |
Rice direct seeder with soil cover 水稻覆土直播机 |
China National Standards 2010 |
English PDF |
GB/T 25417-2010 |
Potato planting machine - Specifications 马铃薯种植机 技术条件 |
China National Standards 2010 |
English PDF |
GB/T 25416-2010 |
Complete equipment for cottonseed delinting 棉籽脱绒成套设备 |
China National Standards 2010 |
English PDF |
GB/T 25415-2010 |
Guidelines on practice for aerial application of pesticides 航空施用农药操作准则 |
China National Standards 2010 |
English PDF |
GB/T 25414-2010 |
Thickness limit and test method of mulch film for cotton planting 棉花种植用地膜厚度限值及测定 |
China National Standards 2010 |
English PDF |
GB/T 25413-2010 |
Limit and test method for residual quantity of agricultural mulch film 农田地膜残留量限值及测定 |
China National Standards 2010 |
English PDF |
GB/T 25412-2010 |
Mulch film residue collector 残地膜回收机 |
China National Standards 2010 |
English PDF |
GB/T 25411-2010 |
IB single-stage centrifugal pumps IB型单级离心泵 |
China National Standards 2010 |
English PDF |
GB/T 25410-2010 |
Removable pump station powered by tractor 以拖拉机为动力的移动式泵站 |
China National Standards 2010 |
English PDF |
GB/T 25409-2010 |
Small-size submersible motor-pumps 小型潜水电泵 |
China National Standards 2010 |
English PDF |
GB/T 25408-2010 |
Hanging type long-range sprinkling irrigation machines 悬挂式远射程喷灌机 |
China National Standards 2010 |
English PDF |
GB/T 25407-2010 |
Series small-sized light movable irrigation machines 轻小型移动式灌溉机组 |
China National Standards 2010 |
English PDF |
GB/T 25406-2010 |
Series small-sized light sprinkling irrigation machines 轻小型喷灌机 |
China National Standards 2010 |
English PDF |
GB/T 25405-2010 |
Small-size light piping water irrigation machines 轻小型管道输水灌溉机组 |
China National Standards 2010 |
English PDF |
GB/T 25404-2010 |
Traveling water-saving irrigation machines 行走式节水灌溉机 |
China National Standards 2010 |
English PDF |
GB/T 25403-2010 |
Test facilities for agricultural irrigation equipment 农业灌溉设备用试验装置 |
China National Standards 2010 |
English PDF |
GB/T 25402-2010 |
Equipment for crop protection - Sprayers - Demonstration track for field crop sprayers 植物保护机械 喷雾机 大田作物喷雾机用试验跑道 |
China National Standards 2010 |
English PDF |
GB/T 25401-2010 |
Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods 农业机械 厩肥撒施机 环保要求和试验方法 |
China National Standards 2010 |
English PDF |
GB/T 25400-2010 |
Trailed agricuitural vehicles - Brakes and braking devices - Laboratory test method 牵引式农用车辆 制动器和制动装置 实验室试验方法 |
China National Standards 2010 |
English PDF |
GB/T 25399-2010 |
Tractors and machinery for agriculture and forestry - Hydraulic coupling - Braking circuit 农林拖拉机和机械 液压接头 制动回路 |
China National Standards 2010 |
English PDF |
GB/T 25398-2010 |
Agricultural trailers and trailed equipment - Braking cylinders - Specifications 农用挂车和牵引式机具 制动用液压缸 技术要求 |
China National Standards 2010 |
English PDF |
GB/T 25397-2010 |
Agricultural machinery - Rotary and flail mower - Test methods and acceptance criteria for protective skirts 农业机械 旋转式和甩刀式割草机 防护罩(裙)试验方法和验收规范 |
China National Standards 2010 |
English PDF |
GB/T 25396-2010 |
Agricultural machinery - Rotary and flail mower - Thrown-object test and acceptance criteria 农业机械 旋转式和甩刀式割草机 抛掷物试验和验收规范 |
China National Standards 2010 |
English PDF |
GB/T 25395-2010 |
Equipment for vine cultivation and wine making - Grape presses - Methods of test 葡萄栽培和葡萄酒酿制设备 葡萄压榨机 试验方法 |
China National Standards 2010 |
English PDF |
GB/T 25394-2010 |
Equipment for vine cultivation and wine making - Mash pumps - Methods of test 葡萄栽培和葡萄酒酿制设备 果浆泵 试验方法 |
China National Standards 2010 |
English PDF |
GB/T 25393-2010 |
Equipment for vine cultivation and wine making - Grape-harvesting machinery - Test methods 葡萄栽培和葡萄酒酿制设备 葡萄收获机 试验方法 |
China National Standards 2010 |
English PDF |
GB/T 25392-2010 |
Agricultural engineering - Electrical and electronic equipment - Testing resistance to environmental conditions 农业工程 电气和电子设备 对环境条件的耐久试验 |
China National Standards 2010 |
English PDF |
GB/T 25391-2010 |
Technical specification of water-pumping wind-mill 风力提水机组技术规范 |
China National Standards 2010 |
English PDF |
GB/T 25390-2010 |
Spheroidal graphite cast iron for wind turbine 风力发电机组 球墨铸铁件 |
China National Standards 2010 |
English PDF |
GB/T 25389.2-2010 |
Wind turbine low-speed permanent magnet synchronous generator - Part 2: Testing methods 风力发电机组 低速永磁同步发电机 第2部分:试验方法 |
China National Standards 2010 |
English PDF |
GB/T 25389.1-2010 |
Wind turbine low-speed permanent magnet synchronous generator - Part 1: Technical conditions 风力发电机组 低速永磁同步发电机 第1部分:技术条件 |
China National Standards 2010 |
English PDF |
Find out:1978Items | To Page of: First -Previous-Next -Last | [2] [3] [4] [5] [6] [7] [8] |