Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| NB/SH/T 0599-2013 |
Criteria for change oil of L-HM hydraulic oil L-HM液压油换油指标 |
China Energy industry Standards |
 English PDF |
| NB/SH/T 0588-2013 |
Standard test method for determining the volume contraction of petroleum waxes 石油蜡体积收缩率测定法 |
China Energy industry Standards |
English PDF |
| NB/SH/T 0562-2013 |
Standard test method for determination of yield stress and apparent viscosity of engine oils at low temperature 低温下发动机油屈服应力和表现黏度测定法 |
China Energy industry Standards |
English PDF |
| NB/SH/T 0538-2013 |
Criteria for change of compressor oils used in light duty rotary oil-flooded air compressor 轻负荷喷油回转式空气压缩机油换油指标 |
China Energy industry Standards |
English PDF |
| NB/SH/T 0449-2013 |
7805 Anti-chemical sealing grease 7805号抗化学密封脂 |
China Energy industry Standards |
English PDF |
| NB/T 25016.7-2013 |
Surveillance guide for conventional island equipment in nuclear power plants. Part 7: Deaerator 核电厂常规岛设备监造技术导则 第7部分:除氧器 |
China Energy industry Standards |
English PDF |
| NB/T 42005-2013 |
Test method for thermal voltage-endurance testing on groundwall insulation of stator coil of high voltage AC machines 高压交流电机定子线圈对地绝缘电热老化试验方法 |
China Energy industry Standards |
English PDF |
| NB/T 42004-2013 |
Test method for voltage-endurance test on groundwall insulation of stator coil of high voltage AC machines 高压交流电机定子线圈对地绝缘电老化试验 方法 |
China Energy industry Standards |
English PDF |
| NB/T 42003-2013 |
Insulation test method on core (lamination) of high voltage machines 高压电机铁心（冲片）绝缘试验方法 |
China Energy industry Standards |
English PDF |
| NB/T 32004-2013 |
Technical specification of grid-connected PV inverter 光伏发电并网逆变器技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 51008-2012 |
Determination of thermal environment and evaluation methods in coal mine 矿内热环境测定与评价方法 |
China Energy industry Standards |
English PDF |
| NB/T 51007-2012 |
Technical specifications for integrated pillarless coal production and methane extraction 无煤柱煤与瓦斯共采技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 51006-2012 |
Technical specifications of gas pre-drainage and eliminating outburst effect assessment 瓦斯预抽消突效果评价技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 51005-2012 |
Design compiling specifications of coal uncovering in mine passageway 井巷揭煤设计编制规范 |
China Energy industry Standards |
English PDF |
| NB/T 51004-2012 |
Specifications for compiling geology instructions of coal uncovering in mine passageway 井巷揭煤地质说明书编制规范 |
China Energy industry Standards |
English PDF |
| NB/T 51003-2012 |
Design specifications of coal face of gas comprehensive treatment 采煤工作面瓦斯综合治理设计规范 |
China Energy industry Standards |
English PDF |
| NB/T 47029-2012 |
Aluminium and aluminium alloy forgings for pressure vessels 压力容器用铝及铝合金锻件 |
China Energy industry Standards |
English PDF |
| NB/T 47028-2012 |
Nickel and nickel alloy forgings for pressure vessels 压力容器用镍及镍合金锻件 |
China Energy industry Standards |
English PDF |
| NB/T 47027-2012 |
Stud bolts and nuts for body flange 压力容器法兰用紧固件 |
China Energy industry Standards |
English PDF |
| NB/T 47026-2012 |
Double-jacketed gaskets 金属包垫片 |
China Energy industry Standards |
English PDF |
| NB/T 47025-2012 |
Spiral wound gaskets 缠绕垫片 |
China Energy industry Standards |
English PDF |
| NB/T 47024-2012 |
Nonmetallic gaskets 非金属软垫片 |
China Energy industry Standards |
English PDF |
| NB/T 47023-2012 |
Welding neck flange 长颈对焊法兰 |
China Energy industry Standards |
English PDF |
| NB/T 47022-2012 |
B-type socket-weld flange 乙型平焊法兰 |
China Energy industry Standards |
English PDF |
| NB/T 47021-2012 |
A-type socket-weld flange 甲型平焊法兰 |
China Energy industry Standards |
English PDF |
| NB/T 42002-2012 |
Copper-clad aluminum bus bars for electrical purposes 电工用通报铝母线 |
China Energy industry Standards |
English PDF |
| NB/T 47020-2012 |
Type and specification for pressure vessel flanges 压力容器法兰分类与技术条件 |
China Energy industry Standards |
English PDF |
| NB/T 31044-2012 |
Technical specification for permanent magnet wind turbine generator-converter set 永磁风力发电机-变流器组技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31043-2012 |
Technical specification for main control system of offshore wind turbine generator system 海上风力发电机组主控制系统技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31042-2012 |
Converter of offshore permanent magnet wind turbine generator 海上永磁风力发电机变流器 |
China Energy industry Standards |
English PDF |
| NB/T 31041-2012 |
Converter of offshore doubly-fed wind turbine generator 海上双馈风力发电机变流器 |
China Energy industry Standards |
English PDF |
| NB/T 31040-2012 |
Surge protective devices with integral short circuit protection function 具有短路保护功能的电涌保护器 |
China Energy industry Standards |
English PDF |
| NB/T 31039-2012 |
Technical specification for lightning protection system of wind turbine 风力发电机组雷电防护系统技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31038-2012 |
Low-voltage reactive power compensation assemblies for wind power generation 风力发电用低压成套无功功率补偿装置 |
China Energy industry Standards |
English PDF |
| NB/T 31037-2012 |
Low-voltage switchgear and controlgear assemblies for wind power generation 风力发电用低压成套开关设备和控制设备 |
China Energy industry Standards |
English PDF |
| NB/T 31036-2012 |
Flexible and torsion resistant cables of rated voltages up to and including 1.8/3kV for wind turbine. Part 3: Methods for torsion test 额定电压1.8/3 kv及以下风力发电用耐扭曲软电缆 第3部分：扭转试验方法 |
China Energy industry Standards |
English PDF |
| NB/T 31035-2012 |
Flexible and torsion resistant cables of rated voltages up to and including 1.8/3 kV for wind turbine-Part. 2: Cables for rated voltage of 1.8/3 kV 额定电压1.8/3 kv及以下风力发电用耐扭曲软电缆 第2部分：额定电压1.8/3 kv电缆 |
China Energy industry Standards |
English PDF |
| NB/T 31034-2012 |
Flexible and torsion resistant cables of rated voltages up to and including 1.8/3kV for wind turbine. Part 1: Cables for rated voltages up to and including 0.6/1kV 额定电压1.8/3 kv及以下风力发电用耐扭曲软电缆 第1部分：额定电压0.6/1 kv及以下电缆 |
China Energy industry Standards |
English PDF |
| NB/T 31033-2012 |
Code for construction planning of offshore wind power projects 海上风电场工程施工组织设计技术规定 |
China Energy industry Standards |
English PDF |
| NB/T 31032-2012 |
Code for preparation of offshore wind power projects feasibility study report 海上风电场工程可行性研究报告编制规程 |
China Energy industry Standards |
English PDF |
| NB/T 31031-2012 |
Code for preparation of offshore wind power projects pre-feasibility study report 海上风电场工程预可行性研究报告编制规程 |
China Energy industry Standards |
English PDF |
| NB/T 31030-2012 |
Specifications for engineering geological investigation of wind power projects 陆地和海上风电场工程地质勘察规范 |
China Energy industry Standards |
English PDF |
| NB/T 31029-2012 |
Specification of wind energy resource measurement and marine hydrographic observation for offshore wind power projects 海上风电场风能资源测量及海洋水文观测规范 |
China Energy industry Standards |
English PDF |
| NB/T 1004-2012 |
Methods for preparation of preliminary design budgetary estimation of underground oil storage in rock caverns project of national oil strategic reserve (provisional) 国家石油储备地下水封洞库工程项目初步设计概算编制办法(试行) |
China Energy industry Standards |
English PDF |
| NB/T 1003-2012 |
Constriction code for underground oil storage in rock caverns project of national oil strategic reserve (provisional) 国家石油储备地下水封洞库工程项目建设标准（试行） |
China Energy industry Standards |
English PDF |
| NB/T 1002-2012 |
Guides for Preparation of preliminary design of underground oil storage in rock caverns project of national oil strategic reserve (provisional) 国家石油储备地下水封洞库工程项目初步设计编制规定(试行) |
China Energy industry Standards |
English PDF |
| NB/T 25009-2012 |
Energy statistics procedure in pressurized water nuclear power plants 压水堆核电厂能量统计规程 |
China Energy industry Standards |
English PDF |
| NB/T 20195-2012 |
Reactor thermal power measurement procedure for reactor core in pressurized water nuclear power plant 压水堆核电厂堆芯热功率测量规程 |
China Energy industry Standards |
English PDF |
| NB/T 20194-2012 |
Design criterion of radiation shield in the PWR nuclear power plant 压水堆核电厂辐射屏蔽设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20193-2012 |
Design code for steam/water piping of conventional island of nuclear power plant 核电厂常规岛汽水管道设计技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 20192-2012 |
General requirements for pilot operated safety valves of pressurized water reactor nuclear power plant 压水堆核电厂先导式安全阀通用要求 |
China Energy industry Standards |
English PDF |
| NB/T 20191-2012 |
Accessibility criteria for in-service inspections in structural design of pressurized water reactor nuclear power plants 压水堆核电厂结构设计中在役检查的可达性准则 |
China Energy industry Standards |
English PDF |
| NB/T 20190-2012 |
Noise control for production buildings of nuclear power plants 核电厂生产厂房的噪声控制 |
China Energy industry Standards |
English PDF |
| NB/T 20189-2012 |
Interface design criteria concerning nuclear steam supply system and turbine building of pressuried water reactor nuclear power plant 压水堆核电厂核供汽系统与汽轮机厂房接口设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20188-2012 |
Design criteria for essential service water system for pressuried water reactor nuclear power plant 压水堆核电厂重要厂用水系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20187-2012 |
Design criteria for reactor coolant system in pressurized water reactor nuclear power plants 压水堆核电厂反应堆冷却剂系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20186-2012 |
Calculation of doses to public from routine releases of reactor radioactive effluents 反应堆放射性流出物常规排放所致公众剂量的估算方法 |
China Energy industry Standards |
English PDF |
| NB/T 20185-2012 |
Design criterion of radiation zoning inside of the PWR nuclear power plant 压水堆核动力厂厂内辐射分区设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20184-2012 |
General specification on transport vessel for fresh fuel assembly of PWR nuclear power plants 压水堆核电厂新燃料组件运输容器通用技术条件 |
China Energy industry Standards |
English PDF |
| NB/T 20183-2012 |
Compilation guideline for nuclear power plant reliability assurance program 核电厂可靠性保证大纲编写指南 |
China Energy industry Standards |
English PDF |
| NB/T 20182-2012 |
Techincal specification of radiation environmental impact assessment for gaseous releases of nuclear power plant on accident conditions 核电厂事故工况气载放射性物质释放辐射环境影响评价技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 20181-2012 |
Technical specification of radiation environmental impact assessment for airborne radioactive effluents of nuclear power plant on operational states 核电厂运行状态下气载放射性流出物辐射环境影响评价技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 20180-2012 |
Design criteria for compressed air supplying system of nuclear island in nuclear power plant 核电厂核岛压缩空气供给系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20179-2012 |
Design criteria for compressed air system of nuclear power plant 核电厂压缩空气系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20178-2012 |
Design criteria of nuclear sampling system of pressurized water reactor nuclear power plant 压水堆核电厂核取样系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20177-2012 |
Design criteria for component cooling water system of pressurized water reactor nuclear power plants 压水堆核电厂设备冷却水系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20176-2012 |
Design requirement for hydrogen supply, nitrogen supply, oxygen supply, carbon dioxide supply system of PWR nuclear power plant 压水堆核电厂供氢、供氮、供氧、供二氧化碳系统的设计要求 |
China Energy industry Standards |
English PDF |
| NB/T 20175-2012 |
Requirements for installation and acceptance of fuel handling and storage system at PWR plant 压水堆核电厂燃料操作与贮存系统安装及验收技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20174-2012 |
The technical requirements of field fabrication and acceptance for carbon and stainless steel tank in pressurized water reactor nuclear power plants 压水堆核电厂核岛碳钢及不锈钢贮罐现场制作及验收技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20173-2012 |
Requirements for construction and test of polar crane at PWR reactor building 压水堆核电厂反应堆厂房环吊安装及试验技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20172-2012 |
Technical rules for nuclear engineering surveying datum network establishment 核电工程测量基准网的建立和管理规定 |
China Energy industry Standards |
English PDF |
| NB/T 20171-2012 |
Qualification procedure for safety class 3 pump of pressurized water reactor nuclear power plant 压水堆核电厂核三级泵特定鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20170-2012 |
Qualification procedure of safety class diesel-generator units for nuclear power plants 核电厂安全级柴油发电机组鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20169-2012 |
Qualification procedure for auxiliary feed water turbine-driven pump of pressurized water reactor nuclear power plant 压水堆核电厂汽动辅助给水泵特定鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20168-2012 |
Qualification procedure for check valve of pressurized water reactor nuclear power plants 压水堆核电厂止回阀鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20167-2012 |
Qualification procedure for isolation valve of pressurized water reactor nuclear power plants 压水堆核电厂隔离阀鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20166-2012 |
Qualification procedure for charging pump of pressurized water reactor nuclear power plant 压水堆核电厂上充泵特定鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20165-2012 |
Qualification procedure for residual heat removal pump of pressurized water reactor nuclear power plant 压水堆核电厂余热排出泵特定鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20164-2012 |
Qualification procedure for auxiliary feed water motor-driven pump of pressurized water reactor nuclear power plant 压水堆核电厂电动辅助给水泵特定鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20163-2012 |
Qualification procedure for containment spray pump and low head safety injection pump of pressurized water reactor nuclear power plant 压水堆核电厂安全壳喷淋泵和低压安注泵特定鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20162-2012 |
Technical requirements on the cleaning areas establishment and maintenance of PWR nuclear island equipment during storage, installation and start-up 压水堆核电厂核岛机械设备在贮存、安装和启动期间清洁区的建立和维护技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20161-2012 |
Installation and commissioning technical guideline for ex-core neutron flux measuring system for pressurized water reactor of nuclear power plants 压水堆核电厂堆外中子注量率测量系统安装与试验技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20160-2012 |
The technical specification for watertight stainless steel liner of PWR nuclear power plant 压水堆核电厂不锈钢水池覆面施工技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20159-2012 |
The construction technical specification for liner of reactor building of PWR nuclear power plant 压水堆核电厂反应堆厂房安全壳钢衬里施工技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20158-2012 |
Specification for volute concrete construct of circulating water pump of pressurized water reactors nuclear power plants 压水堆核电厂循环水泵蜗壳混凝土施工技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20157-2012 |
Quality assurance requirements for construction of nuclear power project 核电工程施工质量保证规定 |
China Energy industry Standards |
English PDF |
| NB/T 20156-2012 |
Requirement for compilation and optimization for preventive maintenance program at nuclear power plants 核电厂预防性维修大纲的编制与优化要求 |
China Energy industry Standards |
English PDF |
| NB/T 20155-2012 |
Aging management on class 1E equipment used in nuclear power plants 核电厂安全级电气设备老化管理 |
China Energy industry Standards |
English PDF |
| NB/T 20154-2012 |
Guideline of ageing management for PWR reactor pressure vessels 压水堆核电厂反应堆压力容器老化管理指南 |
China Energy industry Standards |
English PDF |
| NB/T 20153-2012 |
Ageing management guideline of prestressed concrete containment in nuclear power plants 核电厂预应力混凝土安全壳老化管理指南 |
China Energy industry Standards |
English PDF |
| NB/T 20152-2012 |
Ageing management guideline of piping in nuclear power plants 核电厂管道老化管理指南 |
China Energy industry Standards |
English PDF |
| NB/T 20151-2012 |
Guideline for preparing ageing management programme of pressurized water reactor nuclear power plants 压水堆核电厂老化管理大纲编制指南 |
China Energy industry Standards |
English PDF |
| NB/T 20150-2012 |
Characteristics and test methods of self-powered neutron detectors for nuclear power plants 核电厂自给能中子探测器特性和测试方法 |
China Energy industry Standards |
English PDF |
| NB/T 20149-2012 |
Qualification procedure for pressure transmitter important to safety of nuclear power plants 核电厂安全重要压力变送器鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20148-2012 |
Resistance temperature detectors important to safety in nuclear power plants 核电厂安全重要仪表电阻温度计 |
China Energy industry Standards |
English PDF |
| NB/T 20147-2012 |
Criteria for physical protection systems for nuclear power plants 核电厂实物保护系统设备准则 |
China Energy industry Standards |
English PDF |
| NB/T 20146-2012 |
Design standard of automatic fire alarm system of nuclear power plants 核电厂火灾自动报警系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20145-2012 |
Compiling criteria of commissioning test procedure and report for nuclear power plants 核电厂调试试验程序和报告编写规范 |
China Energy industry Standards |
English PDF |
| NB/T 20144-2012 |
Initial criticality tests for pressurized water reactor of nuclear power plants 压水堆核电厂反应堆首次临界试验 |
China Energy industry Standards |
English PDF |
| NB/T 20143.1-2012 |
Code on nuclear air and gas treatment Process gas treatment. Part 1: Hydrogen recombiner 核空气与气体处理规范 工艺气体处理 第1部分：氢气复合装置 |
China Energy industry Standards |
English PDF |
| Find out:2601Items | To Page of: First -Previous-Next -Last | [16] [17] [18] [19] [20] [21] [22] |
+86-755-25831330
