Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| NB/T 20039.3-2012 |
Code on nuclear air and gas treatment Ventilation, air conditioning and air cleaning. Part 3: Ductwork 核空气和气体处理规范 通风、空调与空气净化 第3部分：风道 |
China Energy industry Standards |
 English PDF |
| NB/T 20008.8-2012 |
Other materials for pressurized water reactor nuclear power plants. Part 8: Hot extruded nickel-chromium-iron alloy pipes 压水堆核电厂用不锈钢 第26部分：反应堆冷却剂管道用奥氏体-铁素体不锈钢离心浇铸管 |
China Energy industry Standards |
English PDF |
| NB/T 20008.17-2012 |
Other material for pressurized water reactor nuclear power plants. Part 17: Class 2 and 3 unalloyed and alloy ductile iron castings 压水堆核电厂用其他材料 第17部分：2、3 级非合金及合金球墨铸铁件 |
China Energy industry Standards |
English PDF |
| NB/T 20008.16-2012 |
Other material for pressurized water reactor nuclear power plants. Part 16: Cabolt-base alloy for control rod drive mechanism 压水堆核电厂用其他材料 第16部分：控制棒驱动机构用钴基合金 |
China Energy industry Standards |
English PDF |
| NB/T 20007.4-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 4: Niobium stabilized austenitic stainless steel forgings for the shafts of reactor coolant pumps 压水堆核电厂用不锈钢 第4部分：反应堆冷却剂泵轴用含铌稳定化奥氏体不锈钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20007.26-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 26: Austenitic-ferritic stainless steel centrifugally cast pipes for reactor coolant piping 压水堆核电厂用不锈钢 第26部分：反应堆冷却剂管道用奥氏体-铁素体不锈钢离心浇铸管 |
China Energy industry Standards |
English PDF |
| NB/T 20007.21-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 21: Martensitic stainless steel plates for use in making steam generator tube support plates 压水堆核电厂用不锈钢 第21部分：蒸汽发生器传热管支承用马氏体不锈钢板 |
China Energy industry Standards |
English PDF |
| NB/T 20007.13-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 13: Forged tubes and elbows made from controlled nitrogen austenitic stainless steel for reactor coolant piping 压水堆核电厂用不锈钢 第13部分：反应堆冷却剂管道用控氮奥氏体不锈钢锻造管和弯管 |
China Energy industry Standards |
English PDF |
| NB/T 20006.8-2012 |
Alloy steel for pressurized water reactor nuclear power plants. Part 8: Mn-Ni-Mo steel forgings for steam generator upper heads 压水堆核电厂用合金钢 第8部分：蒸汽发生器上封头用锰-镍钼钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20006.7-2012 |
Alloy steel for pressurized water reactor nuclear power plants. Part 7: Mn-Ni-Mo steel forgings for steam generators shells 压水堆核电厂用合金钢 第7部分：蒸汽发生器筒体用锰-镍-钼钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20006.5-2012 |
Alloy steel for pressurized water reactor nuclear power plants. Part 5: Mn-Ni-Mo alloy steel forgings for reactor pressure vessel heads 压水堆核电厂用合金钢 第5部分：反应堆压力容器封头用锰-镍-钼钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20006.13-2012 |
Alloy steel for pressurized water reactor nuclear power plants. Part 13: Alloy steel forgings for reactor coolant pump motor shaft assembles 压水堆核电厂用合金钢 第13部分：反应堆冷却剂泵电动机轴系用合金钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20005.14-2012 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 14: Class 2 and 3 butt-welding seamless fittings 压水堆核电厂用碳钢和低合金钢 第14部分：2、3级对焊无缝管件 |
China Energy industry Standards |
English PDF |
| NB/Z 42001.1-2012 |
The norm of energy consumption per unit product of thermal power equipment manufacturing enterprises Part 1: Utility boiler 火力发电设备制造企业单位产品能源消耗限额 第1部分：电站锅炉 |
China Energy industry Standards |
English PDF |
| NB/T 34011-2012 |
Specifications for sewage treatment device of biomass gasification system 生物质气化集中供气污水处理装置技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 34010-2012 |
Test method for biomass cooking and radiant beating stoves 生物质炊事烤火炉具试验方法 |
China Energy industry Standards |
English PDF |
| NB/T 34009-2012 |
General specification for biomass cooking and radiant heating stoves 生物质炊事烤火炉具通用技术条件 |
China Energy industry Standards |
English PDF |
| NB/T 34008-2012 |
Test method for biomass cooking and heating stoves 生物质炊事采暖炉具试验方法 |
China Energy industry Standards |
English PDF |
| NB/T 34007-2012 |
General specification for biomass cooking and heating stoves 生物质炊事采暖炉具通用技术条件 |
China Energy industry Standards |
English PDF |
| NB/T 32003-2012 |
Self-regulating heating cables for solar heat application 太阳能热利用自限温电热带 |
China Energy industry Standards |
English PDF |
| NB/T 32002-2012 |
Solar lawn light 太阳能草坪灯 |
China Energy industry Standards |
English PDF |
| NB/T 32001-2012 |
Technical specification for environmental impact assessment of photovoltaic power station 光伏发电站环境影响评价技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31028-2012 |
Code for preparation of safety pre-assessment report of wind power projects 风电场工程安全预评价报告编制规程 |
China Energy industry Standards |
English PDF |
| NB/T 31027-2012 |
Code for preparation of safety assessment report upon completion of wind power projects 风电场工程安全验收评价报告编制规程 |
China Energy industry Standards |
English PDF |
| NB/T 31026-2012 |
Electric design code for windpower projects 风电场工程电气设计规范 |
China Energy industry Standards |
English PDF |
| NB/T 31025-2012 |
Ring type forgings of wind turbine generator system 风力发电机组 环形锻件 |
China Energy industry Standards |
English PDF |
| NB/T 31024-2012 |
Hydraulic disc brake for yawing of wind turbine generator systems 风力发电机组 偏航液压盘式制动器 |
China Energy industry Standards |
English PDF |
| NB/T 31023-2012 |
Hydraulic caliper disc brake for speed-shaft of wind turbine generator systems 风力发电机组 高速轴液压盘式制动器 |
China Energy industry Standards |
English PDF |
| NB/T 51002-2012 |
Solid filling mechanized mining methods 综合机械化固体充填采煤方法 |
China Energy industry Standards |
English PDF |
| NB/T 31022-2012 |
Code for acceptance of wind power engineering reaching the standard putting into production 风力发电工程达标投产验收规程 |
China Energy industry Standards |
English PDF |
| NB/T 31021-2012 |
Specification for scientific and technological records filing and arrangement of wind farm 风力发电企业科技文件归档与整理规范 |
China Energy industry Standards |
English PDF |
| NB/T 20142-2012 |
Guide for chemical decontamination of primary loop system and components of PWR nuclear power plants 压水堆核电厂一回路系统及设备化学去污 |
China Energy industry Standards |
English PDF |
| NB/T 20141-2012 |
Packaging, transportation, loading and unloading and storage of fresh fuel assembly for PWR nuclear power plant 压水堆核电厂新燃料组件包装、运输、装卸和贮存规定 |
China Energy industry Standards |
English PDF |
| NB/T 20140-2012 |
Technical specification for radiation protection of nuclear power plants siting 核动力厂厂址选择辐射防护技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 20139-2012 |
Technical criteria for environmental radioactivity background investigation for nuclear power plant 核电厂环境放射性本底调查技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 20138-2012 |
Individual monitoring and workplace monitoring of nuclear power plant 核电厂个人和工作场所辐射监测 |
China Energy industry Standards |
English PDF |
| NB/T 20137-2012 |
Regulation for staff training of radiation protection in nuclear power plants 核电厂工作人员辐射防护培训规定 |
China Energy industry Standards |
English PDF |
| NB/T 20136-2012 |
Design criterion for radiation controlled area access of nuclear power plants 核电厂辐射控制区出入口设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20135-2012 |
General guidelines for reliability data exchange of nuclear power plants 核电厂可靠性数据交换导则 |
China Energy industry Standards |
English PDF |
| NB/T 20134-2012 |
Guidelines to ensure quality of collected data on reliability of nuclear power plants 保证所收集的核电厂可靠性数据质量的导则 |
China Energy industry Standards |
English PDF |
| NB/T 20133.6-2012 |
Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 6: Coating operation 压水堆核电厂设施设备防护涂层规范 第6部分：涂装作业 |
China Energy industry Standards |
English PDF |
| NB/T 20133.5-2012 |
Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 5: Standard test method for chemical resistance 压水堆核电厂设施设备防护涂层规范 第5部分：涂层系统耐化学介质的测定 |
China Energy industry Standards |
English PDF |
| NB/T 20133.4-2012 |
Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 4: Determination of the decontaminability of coatings 压水堆核电厂设施设备防护涂层规范 第4部分：涂层系统可去污性的测定 |
China Energy industry Standards |
English PDF |
| NB/T 20133.3-2012 |
Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 3: Standard test method for effects of gamma radiation 压水堆核电厂设施设备防护涂层规范 第3部分：涂层系统受γ射线辐照影响的试验方法 |
China Energy industry Standards |
English PDF |
| NB/T 20133.2-2012 |
Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 2: Standard test method for evaluating coatings at simulated design basis accident(DBA)conditions 压水堆核电厂设施设备防护涂层规范 第2部分：涂层系统在模拟设计基准事故条件下的评价试验方法 |
China Energy industry Standards |
English PDF |
| NB/T 20133.1-2012 |
Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part l: General requirements 压水堆核电厂设施设备防护涂层规范 第1部分：通用要求 |
China Energy industry Standards |
English PDF |
| NB/T 20132-2012 |
Design requirements of personnel airlock for containment in pressurized water reactor nuclear power plants 压水堆核电厂安全壳人员气闸门设计要求 |
China Energy industry Standards |
English PDF |
| NB/T 20131-2012 |
Design criteria for emergency core cooling sump of pressurized water reactors nuclear power plants 压水堆核电厂应急堆芯冷却地坑设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20130-2012 |
Concrete radiation shielding 混凝土辐射屏蔽 |
China Energy industry Standards |
English PDF |
| NB/T 20129-2012 |
General technical regulation for installation, test and acceptance of emergency diesel generator of nuclear island in pressurized water reactor nuclear power plants 压水堆核电厂核岛应急柴油发电机组的安装、试验与验收技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20128-2012 |
Specifications on construction and acceptance of nuclear island foundation pit 核岛厂房基坑的施工及验收规范 |
China Energy industry Standards |
English PDF |
| NB/T 20127-2012 |
Technical requirements for embedment parts manufacture and installation of PWR nuclear power plant 压水堆核电厂预埋件制作与安装技术要求 |
China Energy industry Standards |
English PDF |
| NB/T 20126-2012 |
Specifications for construction and acceptance of caulking of PWR nuclear island plant 压水堆核电厂核岛厂房嵌缝的施工及验收规范 |
China Energy industry Standards |
English PDF |
| NB/T 20125-2012 |
Construction specification of the foundation grouting for PWR safety important facility 压水堆核电厂安全重要设备基础灌浆施工技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20124-2012 |
Code for acceptance of construction of biological shielding concrete of PWR nuclear power plant 压水堆核电厂生物屏蔽混凝土施工验收规范 |
China Energy industry Standards |
English PDF |
| NB/T 20123-2012 |
Standard for division of sub-section and sub-project in construction of nuclear power plant 核电工程分部分项划分规定 |
China Energy industry Standards |
English PDF |
| NB/T 20122-2012 |
Checking-and-acceptance management provision for the quality and the hand-over of nuclear power engineering construction 核电工程施工质量评定及交工验收管理规定 |
China Energy industry Standards |
English PDF |
| NB/T 20121-2012 |
The regulation for editing construction organization plan of nuclear power project 核电工程施工组织设计编制规定 |
China Energy industry Standards |
English PDF |
| NB/T 20120-2012 |
Management provision for the technology of nuclear power engineering construction 核电工程施工技术管理规定 |
China Energy industry Standards |
English PDF |
| NB/T 20119-2012 |
Material item management requirements for nuclear power engineering 核电工程施工物项管理规定 |
China Energy industry Standards |
English PDF |
| NB/T 20118-2012 |
Regulation for fire protection for nuclear power plants construction 核电工程施工防火管理规定 |
China Energy industry Standards |
English PDF |
| NB/T 20117-2012 |
Prescriptions of safety management for construction of nuclear power project 核电工程施工安全管理规定 |
China Energy industry Standards |
English PDF |
| NB/T 20116-2012 |
The general requirements of informatization for nuclear power plants construction project management 核电工程建设信息化管理通用要求 |
China Energy industry Standards |
English PDF |
| NB/T 20115-2012 |
Technical regulation for construction and acceptance of reactor pressure vessel head installation in PWR nuclear power plant 压水堆核电厂堆顶结构安装施工技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20114-2012 |
The technical regulation of pressurized water reactor CRDW power supply system installation 压水堆核电厂棒电源系统安装技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20113-2012 |
Technical regulation for construction of HVAC installation in PWR nuclear power plant 压水堆核电厂核岛厂房通风系统安装技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20112-2012 |
Technical regulation of the cable terminal connection in the reactor building for PWR nuclear power plant 压水堆核电厂反应堆厂房电缆端接技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20111-2012 |
General technical regulation of safety-related velves installation in PWR nuclear power plant 压水堆核电厂核岛阀门通用安装技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20110-2012 |
Technical regulation for installation of PWR nuclear power auxiliary system equipment 压水堆核电厂核辅助系统设备安装技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20109-2012 |
Technical specification of neutron flux guide tube installation in reactor building for PWR nuclear power plant 压水堆核电厂反应堆厂房中子通量管安装技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20108-2012 |
Technical regulation of containment penetration installation in PWR nuclear power plant 压水堆核电厂安全壳贯穿件安装技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20107-2012 |
Technical regulation for construction of reactor coolant pump installation in PWR nuclear power plant 压水堆核电厂反应堆冷却剂泵安装技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20106-2012 |
Model regulation of cooling water for nuclear power plant 核电厂冷却水模拟技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 20105-2012 |
Load code for the design of nuclear power plants building structures 核电厂厂房设计荷载规范 |
China Energy industry Standards |
English PDF |
| NB/T 20104-2012 |
Analysis requirement for anticipated transient without scram on pressurized water reactor nuclear power plants 压水堆核电厂未能紧急停堆的预期瞬态分析要求 |
China Energy industry Standards |
English PDF |
| NB/T 20103-2012 |
Accident analysis and safety criteria for pressurized water reactor nuclear power plant 压水堆核电厂事故分析和安全判据 |
China Energy industry Standards |
English PDF |
| NB/T 20102-2012 |
Steady-state neutron reactors response rate to determine the distribution and reactivity 核反应堆稳态中子反应率分布和反应性的确定 |
China Energy industry Standards |
English PDF |
| NB/T 20101-2012 |
PWR nuclear power plant reactor accident analysis requirements bomb stick 压水堆核电厂反应堆弹棒事故分析要求 |
China Energy industry Standards |
English PDF |
| NB/T 20100-2012 |
Principles for main primary system and main steam system overpressure analysis of pressurized water reactor nuclear power plants 压水堆核电厂反应堆一回路系统和主蒸汽系统超压分析 要求 |
China Energy industry Standards |
English PDF |
| NB/T 20099-2012 |
Analysis demand for loss-of-coolant accident of pressurized water reactor nuclear power plants 压水堆核电厂反应堆冷却剂丧失事故分析要求 |
China Energy industry Standards |
English PDF |
| NB/T 20098-2012 |
Design criteria for containment hydrogen control system of pressurized water reactor nuclear power plants 压水堆核电厂安全壳氢气控制系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20097-2012 |
Concrete containment functional design requirements for PWR nuclear power plant 压水堆核电厂混凝土安全壳功能设计要求 |
China Energy industry Standards |
English PDF |
| NB/T 20096-2012 |
Failure mode and effects analysis for system of nuclear power plants 核电厂系统故障模式与影响分析导则 |
China Energy industry Standards |
English PDF |
| NB/T 20095-2012 |
Design criteria for HVAC systems located outside containment of PWR nuclear power plant 压水堆核电厂安全壳外供暖、通风、空调系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20094-2012 |
Containment ventilation system of pressurized water reactor nuclear power plant 压水堆核电厂安全壳通风系统 |
China Energy industry Standards |
English PDF |
| NB/T 20093-2012 |
Qualification of safety-related valve actuators for nuclear power plants 核电厂安全级阀门驱动装置的鉴定 |
China Energy industry Standards |
English PDF |
| NB/T 20092-2012 |
Inspection guide for the moisture separator reheater of pressurized water reactor nuclear power plants 压水堆核电厂汽水分离再热器检验导则 |
China Energy industry Standards |
English PDF |
| NB/T 20091-2012 |
Inspection guide for the turbine of pressurized water reactor nuclear power plants 压水堆核电厂汽轮机检验导则 |
China Energy industry Standards |
English PDF |
| NB/T 20090-2012 |
Requirements for preoperational tests of class 1E power systems in nuclear power plants 核电厂安全级电力系统预运行试验要求 |
China Energy industry Standards |
English PDF |
| NB/T 20089-2012 |
Standard criteria for the protection of class 1E power systems and equipment in nuclear power plants 核电厂安全级电力系统及设备保护准则 |
China Energy industry Standards |
English PDF |
| NB/T 20088-2012 |
Requirements for the replacement parts and components for safety class equipment in nuclear power plants 核电厂安全级电气设备零部件更换要求 |
China Energy industry Standards |
English PDF |
| NB/T 20087-2012 |
Aging management guidance for instrument and control cables important to safety for nuclear power plants 核电厂安全重要仪表和控制电缆老化管理指南 |
China Energy industry Standards |
English PDF |
| NB/T 20086-2012 |
Assessing, monitoring, and mitigating aging effects on class 1E equipment used in nuclear power plants 核电厂安全级电气设备老化评估、监测和缓解 |
China Energy industry Standards |
English PDF |
| NB/T 20085-2012 |
Qualification procedure for safety class high-voltage switchboard applied in nuclear power plants 核电厂安全级高压配电盘鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20084-2012 |
Qualification procedure for safety class high-voltage switchboard applied in nuclear power plants 核电厂安全级余热排出泵电机鉴定试验规程 |
China Energy industry Standards |
English PDF |
| NB/T 20083-2012 |
Criteria for lubricating oil systems design for emergency diesel generator of nuclear power plants 核电厂应急柴油发电机润滑油系统设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20082-2012 |
Qualification procedure for safety-class diesel-generator applied as standby power supplies for nuclear power plants 核电厂安全级柴油发电机鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20081-2012 |
Qualification procedure for class 1E transformer applied in pressurized-water reactor nuclear power plants 压水堆核电厂安全级变压器鉴定规程 |
China Energy industry Standards |
English PDF |
| NB/T 20080-2012 |
Qualification of class 1E lead storage batteries for nuclear power plants 核电厂安全级蓄电池质量鉴定 |
China Energy industry Standards |
English PDF |
| NB/T 20079-2012 |
Qualification procedure for safety-class electric actuators applied in nuclear power plants 核电厂安全级阀门电动装置鉴定规程 |
China Energy industry Standards |
English PDF |
| Find out:2601Items | To Page of: First -Previous-Next -Last | [17] [18] [19] [20] [21] [22] [23] |
+86-755-25831330
