Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| NB/T 20078-2012 |
Qualification procedure for safety-related pneumatic control valve of pressurized water reactor nuclear power plants 压水堆核电厂安全级气动调节阀鉴定规程 |
China Energy industry Standards |
 English PDF |
| NB/T 20077-2012 |
Criteria for the handling and initial evaluation of records from nuclear power plants seismic instrumentation 核电厂地震仪表记录的处理和初步评估 |
China Energy industry Standards |
English PDF |
| NB/T 20076-2012 |
Earthquake instrumentation criteria for nuclear power plants 核电厂地震仪表准则 |
China Energy industry Standards |
English PDF |
| NB/T 20075-2012 |
Protection provided by electrical equipment against external impact for nuclear power plants 核电厂电气设备防外部撞击的防护 |
China Energy industry Standards |
English PDF |
| NB/T 20074-2012 |
Qualification of class 1E motor control centers for nuclear power plants 核电厂安全级电动机控制中心质量鉴定 |
China Energy industry Standards |
English PDF |
| NB/T 20073-2012 |
Criterion for instrumentation and control equipment grounding in nuclear power plants 核电厂仪表和控制设备接地准则 |
China Energy industry Standards |
English PDF |
| NB/T 20072-2012 |
Determination and maintenance of trip setpoints for instrumentation of safety system in nuclear power plants 核电厂安全系统仪表触发整定值的确定和保持 |
China Energy industry Standards |
English PDF |
| NB/T 20071-2012 |
Requirements for electrical supplies of instrumentation and control systems important to safety in nuclear power plants 核电厂安全重要仪表和控制系统的供电要求 |
China Energy industry Standards |
English PDF |
| NB/T 20070-2012 |
Criteria for design, installation, and qualification of raceway systems for class 1E circuits in nuclear power plants 核电厂安全级电路电缆通道系统设计安装和鉴定准则 |
China Energy industry Standards |
English PDF |
| NB/T 20069-2012 |
Performance monitoring test of instrumentation channels important to safety in nuclear power plants 核电厂安全重要仪表通道性能监督试验 |
China Energy industry Standards |
English PDF |
| NB/T 20068-2012 |
Requirements for coping with common cause failure(CCF)of instrumentation and control systems important to safety in nuclear power plants 核电厂安全重要仪表和控制系统应对共因故障的要求 |
China Energy industry Standards |
English PDF |
| NB/T 20067-2012 |
Identification for safety class equipment in nuclear power plants 核电厂安全级电气设备标识 |
China Energy industry Standards |
English PDF |
| NB/T 20066-2012 |
The design criteria for nuclear power plants station blackout 核电厂应对全厂断电设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20065-2012 |
Installation and arrangement requirement for transducer and transmitter important to safety in nuclear power plant 核电厂安全重要传感器和变送器的安装和布置要求 |
China Energy industry Standards |
English PDF |
| NB/T 20064-2012 |
Installation and test requirement of in-core instrumentation system in pressured water reactor nuclear power plant 压水堆核电厂反应堆堆芯仪表系统安装和试验要求 |
China Energy industry Standards |
English PDF |
| NB/T 20063-2012 |
Glossary of terms of instrumentation and control for nuclear power plants 核电厂仪表和控制术语 |
China Energy industry Standards |
English PDF |
| NB/T 20062-2012 |
Batteries for uninterruptible power supply systems for nuclear power plants 核电厂不间断电源系统蓄电池组 |
China Energy industry Standards |
English PDF |
| NB/T 20039.8-2012 |
Code on nuclear air and gas treatment. Ventilation, air conditioning and air cleaning. Part 8: Medium efficiency air filters 核空气和气体处理规范 通风、空调与空气净化 第8部分：中效空气过滤器 |
China Energy industry Standards |
English PDF |
| NB/T 20039.15-2012 |
Code on nuclear air and gas treatment. Ventilation, air conditioning and air cleaning. Part 15: Adsorbent media 核空气和气体处理规范 通风、空调与空气净化 第15部分：吸附介质 |
China Energy industry Standards |
English PDF |
| NB/T 20039.13-2012 |
Code on nuclear air and gas treatment. Ventilation, air conditioning and air cleaning. Part 13: Iodine adsorbers (type Ⅲ) 核空气和气体处理规范 通风、空调与空气净化 第13部分：碘吸附器（ⅲ型） |
China Energy industry Standards |
English PDF |
| NB/T 20037.3-2012 |
Probabilistic safety assessment for nuclear power plant applications. Part 3: Flooding 应用于核电厂的概率安全评价 第3部分:水淹 |
China Energy industry Standards |
English PDF |
| NB/T 20037.2-2012 |
Probabilistic safety assessment for nuclear power plant applications. Part 2: Level PSA for internal events at-low power and shutdown 应用于核电厂的概率安全评价 第2部分：低功率和停堆工况内部事件一级psa |
China Energy industry Standards |
English PDF |
| NB/T 20009.8-2012 |
Welding material for pressurized water reactor nuclear power plants. Part 8: Nickel-based alloy wires and filler rods for class 1, 2, 3 components 压水堆核电厂用焊接材料 第8部分：1、2、3级设备用镍基合金焊丝和填充丝 |
China Energy industry Standards |
English PDF |
| NB/T 20009.7-2012 |
Welding material for pressurized water reactor nuclear power plants. Part 7: Stainless steel wires and filler rods for class 1, 2, 3 components 压水堆核电厂用焊接材料 第7部分：1、2、3级设备用不锈钢焊丝和填充丝 |
China Energy industry Standards |
English PDF |
| NB/T 20009.6-2012 |
Welding material for pressurized water reactor nuclear power plants. Part 6: Carbon steel electrodes and rods for gas shielded arc welding of class 1, 2, 3 components 压水堆核电厂用焊接材料 第6部分：1、2、3级设备用碳钢气体保护电弧焊焊丝 |
China Energy industry Standards |
English PDF |
| NB/T 20008.9-2012 |
Other material for pressurized water reactor nuclear power plants. Part 9: Hot rolled or hot extruded nickel-chromium-iron alloy bars 压水堆核电厂用其他材料 第9部分：镍-铬-铁合金热轧或热挤棒 |
China Energy industry Standards |
English PDF |
| NB/T 20008.6-2012 |
Other material for pressurized water reactor nuclear power plants. Part 6: Hot rolled nickel-chromium-iron alloy plates 压水堆核电厂用其他材料 第6部分：镍-铬-铁合金热轧板 |
China Energy industry Standards |
English PDF |
| NB/T 20008.5-2012 |
Other material for pressurized water reactor nuclear power plants. Part 5: Class 1 and 2 hot rolled nickel-chromium-iron alloy plates 压水堆核电厂用其他材料 第5部分：1、2级镍-铬-铁合金热轧板 |
China Energy industry Standards |
English PDF |
| NB/T 20008.4-2012 |
Other material for pressurized water reactor nuclear power plants. Part 4: Forged or rolled class 1, 2 and 3 nickel-chromium-iron alloy parts 压水堆核电厂用其他材料 第4部分：1、2、3 级镍-铬-铁合金锻、轧件 |
China Energy industry Standards |
English PDF |
| NB/T 20008.3-2012 |
Other material for pressurized water reactor nuclear power plants. Part 3: Class 3 Copper-Aluminium alloy castings for anxiliary system pumps and valves 压水堆核电厂用其他材料 第3部分：3级辅助系统泵、阀用铜－铝合金铸件 |
China Energy industry Standards |
English PDF |
| NB/T 20008.15-2012 |
Other material for pressurized water reactor nuclear power plants. Part 15: Titanium plate for use in the fabrication of class 3 heat exchanger plates 压水堆核电厂用其他材料 第15部分：3级板式热交换器用钛板 |
China Energy industry Standards |
English PDF |
| NB/T 20008.1-2012 |
Other material for pressuriaed water reactor nuclear power plant. Part1: Alloy steel forgings for use in reactor coolant system supports 压水堆核电厂用其他材料 第1部分：反应堆冷却剂系统支承件用合金钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20008.10-2012 |
Other material for pressurized water reactor nuclear power plants. Part 10: Ni-Cr-Fe alloy rolled bars used for internal support pins and bolting 压水堆核电厂用其他材料 第10部分：堆内构件销钉、螺栓紧固件用镍-铬-铁合金轧制棒 |
China Energy industry Standards |
English PDF |
| NB/T 20007.7-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 7: Austenitic stainless steel plate and strip for Class Si and S2 supports 压水堆核电厂用不锈钢 第7部分：s1、s2级支承件用奥氏体不锈钢钢板和钢带 |
China Energy industry Standards |
English PDF |
| NB/T 20007.6-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 6: Controlled nitrogen content austenitic stainless steel plate for Reactor Internal 压水堆核电厂用不锈钢 第6部分：堆内构件用控氮奥氏体不锈钢板 |
China Energy industry Standards |
English PDF |
| NB/T 20007.3-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 3: Controlled nitrogen content austenitic stainless steel forgings for core upports and upper support plates 压水堆核电厂用不锈钢 第3部分：堆芯支承件和上支承板用控氮奥氏体不锈钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20007.22-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part 22 Seamless pipes made from martensitic stainless steel for drive rods of reactor control rod drive mechanisms 压水堆核电厂用不锈钢 第22部分：反应堆控制棒驱动机构驱动杆用马氏体不锈钢无缝钢管 |
China Energy industry Standards |
English PDF |
| NB/T 20007.2-2012 |
Stainless steel for pressurized water reactor of nuclear power plants. Part 2: Austenitic stainless steel forgings for class 2 and 3 tube plates of heat exchanger 压水堆核电厂用不锈钢 第2部分：2、3级热交换器管板用奥氏体不锈钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20007.18-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part, A: Rolled or forged martensitic stainless steel parts for class 2 and 3 auxiliary pump drive shafts 压水堆核电厂用不锈钢 第18部分：2、3级辅助泵驱动轴用马氏体不锈钢锻、轧件 |
China Energy industry Standards |
English PDF |
| NB/T 20007.17-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part17: Martensitic stainless steel forgings used for internal hold down springs 压水堆核电厂用不锈钢 第17部分：堆内构件压紧弹性环用马氏体不锈钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20007.16-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part16: Class 2 and 3 martensitic stainless steel forgings 压水堆核电厂用不锈钢 第16部分：2、3级马氏体不锈钢锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20007.15-2012 |
Stainless steel for pressurized water reactor nuclear power plants. Part15: Strain hardened hot worked rolled or forged bars made from austenitic stainless steel used for the fabrication of bolting material for reactor internals 压水堆核电厂用不锈钢 第15部分：堆内构件螺栓用变形硬化的热轧或热锻奥氏体不锈钢棒 |
China Energy industry Standards |
English PDF |
| NB/T 20005.8-2012 |
Carbon steel and low alloy steel for PWR nuclear power plant. Part 8: Steel plates, beams and bars for class Si and S2 supports 压水堆核电厂用碳钢和低合金钢 第8部分：s1、s2级支承件用钢板、型钢和钢棒 |
China Energy industry Standards |
English PDF |
| NB/T 20005.4-2012 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 4: The forged or rolled parts for use in steam generator main steam systems, feedwater flow control systems, auxiliary feedwater systems and turbine bypass systems 压水堆核电厂用碳钢和低合金钢 第4部分：主蒸汽系统、主给水流量控制系统、辅助给水系统和汽轮机旁路系统用锻、轧件 |
China Energy industry Standards |
English PDF |
| NB/T 20005.3-2012 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 3: Forgings for class 2, 3 auxiliary pump shafts 压水堆核电厂用碳钢和低合金钢 第3部分：2、3 级辅助泵轴锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20005.2-2012 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plant. Part 2: Forgings for class 2, 3 heat exchanger tube plates 压水堆核电厂用碳钢和低合金钢 第2部分:2、3级热交换器管板锻件 |
China Energy industry Standards |
English PDF |
| NB/T 20005.16-2012 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 16: Elbow for main steam system 压水堆核电厂用碳钢和低合金钢 第16部分：主蒸汽系统用弯头 |
China Energy industry Standards |
English PDF |
| NB/T 20005.13-2012 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 13: Seamless drawn carbon steel tubes for class 2 and 3 heat exchangers 压水堆核电厂用碳钢和低合金钢 第13部分：2、3级热交换器传热管用无缝冷拔钢管 |
China Energy industry Standards |
English PDF |
| NB/T 20005.11-2012 |
Carbon steel and low alloy steel for pressurizd water reactor nuclear power plant. Part 11: Seamless pipes for class Si and S2 supports 压水堆核电厂用碳钢和低合金钢 第11部分：s1、s2级支承件用无缝钢管 |
China Energy industry Standards |
English PDF |
| NB/T 20061-2012 |
Practice for application of human factors engineering to systems, equipment, and facilities of nuclear power plant 人因工程在核电厂系统、设备和设施中的应用 |
China Energy industry Standards |
English PDF |
| NB/T 20060-2012 |
The separation criterion for instrumentation and control systems important to safety in nuclear power plants 核电厂安全重要仪表和控制系统隔离准则 |
China Energy industry Standards |
English PDF |
| NB/T 20059-2012 |
The operator controls in control rooms of nuclear power plants 核电厂控制室操纵员控制器 |
China Energy industry Standards |
English PDF |
| NB/T 20058-2012 |
The application of visual display units in control rooms of nuclear power plants 核电厂控制室屏幕显示的应用 |
China Energy industry Standards |
English PDF |
| NB/T 20057.4-2012 |
PWR nuclear power plants reactor system design. Core. Part 4: Core components 压水堆核电厂反应堆系统设计 堆芯 第4部分：燃料相关组件 |
China Energy industry Standards |
English PDF |
| NB/T 20057.3-2012 |
PWR nuclear power plants reactor system design. Core. Part 3: Fuel assembly 压水堆核电厂反应堆系统设计 堆芯 第3部分：燃料组件 |
China Energy industry Standards |
English PDF |
| NB/T 20057.2-2012 |
Pressurized water reactor nuclear power plants reactor system design. Core. Part 2: Thermal hydraulic design criteria 压水堆核电厂反应堆系统设计 堆芯 第2部分：热工水力设计准则 |
China Energy industry Standards |
English PDF |
| NB/T 20057.1-2012 |
Pressurized water reactor nuclear power plants reactor system design. Core. Part 1: Nuclear design 压水堆核电厂反应堆系统设计 堆芯 第1部分：核设计 |
China Energy industry Standards |
English PDF |
| NB/T 47013.9-2012 |
Nondestructive testing of pressure equipments. Part 9: Acoustic emission testing 承压设备无损检测 第9部分:声发射检测 |
China Energy industry Standards |
English PDF |
| NB/T 47013.8-2012 |
Nondestructive testing of pressure equipments. Part 8: Leak Testing {Academic version} 承压设备无损检测 第8部分：泄漏检测 |
China Energy industry Standards |
English PDF |
| NB/T 47013.7-2012 |
Nondestructive testing of pressure equipments. Part 7: Visual examination 承压设备无损检测 第7部分:目视检测 |
China Energy industry Standards |
English PDF |
| NB/T 42001.1-2012 |
The norm of energy consumption per unit product of thermal power equipment manufacturing enterprises. Part 1: Utility boiler 火力发电设备制造企业单位产品能源消耗限额 第1部分:电站锅炉 |
China Energy industry Standards |
English PDF |
| NB/T 31020-2011 |
Corona-resistance polyimide film for turn to turn insulation of wind power generator 风力发电机匝间绝缘用耐电晕聚酰亚胺薄膜 |
China Energy industry Standards |
English PDF |
| NB/T 31019-2011 |
Corona-resistance polyimide film-backed mica paper tapes with glass fabric for coil insulation on wind energy generation 风力发电机线圈绝缘用耐电晕聚酰亚胺薄膜补强玻璃布粉云母带 |
China Energy industry Standards |
English PDF |
| NB/T 31017-2011 |
Technical specification for main control system of doubly fed wind turbine generator system 双馈风力发电机组主控制系统技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31016-2011 |
General specification for power control system of battery energy storage system 电池储能功率控制系统技术条件 |
China Energy industry Standards |
English PDF |
| NB/T 31015-2011 |
Manufactured technical specification for converter of permanent magnet wind turbine generator 永磁风力发电机变流器制造技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31014-2011 |
Manufacturing techakal specification for converter of double-fed wind turbine generator 双馈风力发电机变流器制造技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31013-2011 |
Manufactural and technical specification for double fed wind turbine generator 双馈风力发电机制造技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31012-2011 |
Manufactural and technical specification for permanent magnet type wind turbine generator 永磁风力发电机制造技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31011-2011 |
Specification and calculation basis for cost estimate of onshore wind power projects 陆上风电场工程设计概算编制规定及费用标准 |
China Energy industry Standards |
English PDF |
| NB/T 31010-2011 |
Ration of cost estimation for onshore wind power projects 陆上风电场工程概算定额 |
China Energy industry Standards |
English PDF |
| NB/T 31009-2011 |
Specification and calculation basis for cost estimate of offshore wind power projects 海上风电场工程设计概算编制规定及费用标准 |
China Energy industry Standards |
English PDF |
| NB/T 31008-2011 |
Ration of cost estimate for offshore wind power projects 海上风电场工程概算定额 |
China Energy industry Standards |
English PDF |
| NB/T 31007-2011 |
Charging standards for investigation and design of wind power project 风电场工程勘察设计收费标准 |
China Energy industry Standards |
English PDF |
| NB/T 31006-2011 |
Technical code for anticorrosion of offshore wind farm steel structures 海上风电场钢结构防腐蚀技术标准 |
China Energy industry Standards |
English PDF |
| NB/T 31005-2011 |
Measurement standard of wind farm power quality 风电场电能质量测试方法 |
China Energy industry Standards |
English PDF |
| NB/T 31018-2011 |
Wind turbine generator system technical specification of electric pitch system 风力发电机组电动变桨控制系统技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 31004-2011 |
Guidelines for vibration condition monitoring and diagnose of wind turbine generator 风力发电机组振动状态监测导则 |
China Energy industry Standards |
English PDF |
| NB/T 35002-2011 |
Design code of industry television system for hydraulic power plants 水力发电厂工业电视系统设计规范 |
China Energy industry Standards |
English PDF |
| NB/T 35001-2011 |
Design stipulations for reservoir dispatching automation system of cascade hydropower plants 梯级水电站水调自动化系统设计规范 |
China Energy industry Standards |
English PDF |
| NB/T 31003-2011 |
Design regulations for large-sale wind power connecting to the system 大型风电场并网设计技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 25008-2011 |
Anticorrosion and antifouling of seawater cooling system in nuclear power plant 核电厂海水冷却系统腐蚀控制与电解海水防污 |
China Energy industry Standards |
English PDF |
| NB/T 25007-2011 |
The requirements on documentation system for nuclear power plant commissioning 核电厂调试文件体系编制要求 |
China Energy industry Standards |
English PDF |
| NB/T 25006-2011 |
The code of welding repair of turbine blades for nuclear power plant 核电厂汽轮机叶片焊接修复技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 25005-2011 |
The Code of welding repair of steam turbine cylinder in nuclear power plant 核电厂汽轮机气缸焊接修复技术规程 |
China Energy industry Standards |
English PDF |
| NB/T 25004-2011 |
Performance test code for moisture separator reheaters 汽水分离再热器性能试验规程 |
China Energy industry Standards |
English PDF |
| NB/T 25003-2011 |
Regulations for environmental impact assessment report in siting phases of nuclear power plants 核电厂选址阶段环境影响评价报告编制规定 |
China Energy industry Standards |
English PDF |
| NB/T 25002-2011 |
Code for design of maritime structures of nuclear power plants 核电厂海工构筑物设计规范 |
China Energy industry Standards |
English PDF |
| NB/T 25001-2011 |
Quality assurance in siting for nuclear power plants 核电厂选址质量保证要求 |
China Energy industry Standards |
English PDF |
| NB/T 1001-2011 |
Technical standard for vehicle liquefied natural gas fueling station 液化天然气(lng)汽车加气站技术规范 |
China Energy industry Standards |
English PDF |
| NB/T 51001-2011 |
Coal Construction construction budget targets ground 煤炭建设地面建筑工程概算指标 |
China Energy industry Standards |
English PDF |
| NB/T 47019.8-2011 |
Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 8: Titanium and titanium/alloy 锅炉、热交换器用管订货技术条件 第8部分：有色金属 钛和钛合金 |
China Energy industry Standards |
English PDF |
| NB/T 47019.7-2011 |
Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 7: Copper and copper alloy/tube 锅炉、热交换器用管订货技术条件 第7部分：有色金属 铜和铜合金 |
China Energy industry Standards |
English PDF |
| NB/T 47019.4-2011 |
Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 4: Low alloy steel for low-temperature service 锅炉、热交换器用管订货技术条件 第4部分：低温用低合金钢 |
China Energy industry Standards |
English PDF |
| NB/T 47019.3-2011 |
Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 3: Non-alloy and alloy steel with specified elevated temperature properties 锅炉、热交换器用管订货技术条件 第3部分：规定高温性能的非合金钢和合金钢 |
China Energy industry Standards |
English PDF |
| NB/T 47019.2-2011 |
Purchase technical specification for boiler and heater exchanger tubes/pipes. Part 2: Non-alloy and alloy steel with room temperature properties 锅炉、热交换器用管订货技术条件 第2部分：规定室温性能的非合金钢和合金钢 |
China Energy industry Standards |
English PDF |
| NB/T 47018.7-2011 |
Technical permission of welding materials for pressure equipment Section - Part7: Titanium and titanium-alloy welding electrodes and rods 承压设备用焊接材料订货技术条件 第7部分：钛及钛合金焊丝和填充丝 |
China Energy industry Standards |
English PDF |
| NB/T 47018.6-2011 |
Technical permission of welding materials for pressure equipment Section - Part6: Bare aluminum and aluminum-alloy welding electrodes and rods 承压设备用焊接材料订货技术条件 第6部分：铝及铝合金焊丝和填充丝 |
China Energy industry Standards |
English PDF |
| NB/T 47018.5-2011 |
Technical permission of welding materials for pressure equipment. Section 5: Stainless steel strip electrodes and fluxes for overlay welding 承压设备用焊接材料订货技术条件 第5部分：堆焊用不锈钢焊带和焊剂 |
China Energy industry Standards |
English PDF |
| NB/T 47018.4-2011 |
Technical permission of welding materials for pressure equipment. Section 4: Electrodes and fluxes for submerged arc welding 承压设备用焊接材料订货技术条件 第4部分：埋弧焊钢焊丝和焊剂 |
China Energy industry Standards |
English PDF |
| Find out:2601Items | To Page of: First -Previous-Next -Last | [18] [19] [20] [21] [22] [23] [24] |
+86-755-25831330
