Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 40523.2-2021 |
SHips and marine technology—Measurement of changes in hull and propeller performance—Part 2: Default method 船舶与海上技术 船体和螺旋桨性能变化测量 第2部分：默认方法 |
China National Standards SH |
 English PDF |
| GB/T 40388-2021 |
Test method for SHear strength of C/C composites 碳/碳复合材料剪切强度试验方法 |
China National Standards SH |
English PDF |
| GB/T 40383-2021 |
Hot-rolled twin-roll cast carbon steel SHeet and strip of commercial quality 商品级双辊铸轧热轧碳素钢薄钢板及钢带 |
China National Standards SH |
English PDF |
| GB/T 40426.3-2021 |
Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-SHeet solid surfacing material 塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材 |
China National Standards SH |
English PDF |
| GB/T 40426.2-2021 |
Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—SHeet solid surfacing material 塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材 |
China National Standards SH |
English PDF |
| GB/T 40362-2021 |
Powered toothbruSHes—General requirements and test methods 电动牙刷 一般要求和检测方法 |
China National Standards SH |
English PDF |
| GB/T 40323-2021 |
Determination of octamethylcyclotetrasiloxane(D4)， decamethylcyclopentasiloxane(D5) and dodecamethylcyclohexasiloxane(D6) in textile dyeing and finiSHing auxiliaries 纺织染整助剂产品中八甲基环四硅氧烷（D4）、十甲基环五硅氧烷(D5)和十二甲基环六硅氧烷(D6)的测定 |
China National Standards SH |
English PDF |
| GB/T 40319-2021 |
Wrought aluminum alloy SHeets, strips and foils for drawn cans 拉深罐用铝合金板、带、箔材 |
China National Standards SH |
English PDF |
| GB/T 40316-2021 |
Welded high strength SHaped and round steel tubes for automobile structure 汽车结构用高强度异型及圆形焊接钢管 |
China National Standards SH |
English PDF |
| GB/T 40282-2021 |
Hot-rolled twin roll cast steel SHeets and strips of structural quality and high strength steel 结构级和高强度双辊铸轧热轧薄钢板及钢带 |
China National Standards SH |
English PDF |
| GB/T 40065-2021 |
Specification for circular SHaring management of fruit and vegetable cycling container 果蔬类周转箱循环共用管理规范 |
China National Standards SH |
English PDF |
| GB/T 38206.5-2021 |
Methods to assess the reliability of pneumatic components—Part 5: Non-return valves, SHuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves 气动元件可靠性评估方法 第5部分：止回阀、梭阀、双压阀（与阀）、单向节流阀及快排阀 |
China National Standards SH |
English PDF |
| GB/T 31498-2021 |
Post craSH safety requirement for electric vehicle 电动汽车碰撞后安全要求 |
China National Standards SH |
English PDF |
| GB/T 31214.2-2021 |
Springs—SHot peening—Part 2：Cut wire shot technical specification and testing 弹簧 喷丸 第2部分：钢丝切丸技术要求与检测 |
China National Standards SH |
English PDF |
| GB/T 28011-2021 |
SHanks for footwear 鞋类勾心 |
China National Standards SH |
English PDF |
| GB/T 25015-2021 |
SHips and marine technology—Ship-shifting winches 船舶和海洋技术 移船绞车 |
China National Standards SH |
English PDF |
| GB/T 24524-2021 |
Metallic materials—SHeet and strip—Hole expanding test 金属材料 薄板和薄带 扩孔试验方法 |
China National Standards SH |
English PDF |
| GB/T 24183-2021 |
Metallic materials—SHeet and Strip—Earing test 金属材料 薄板和薄带 制耳试验方法 |
China National Standards SH |
English PDF |
| GB/T 20829-2021 |
Performance requirements and test method of fixed aerosol fire-extinguiSHing systems for ships 船舶固定式气溶胶灭火系统性能要求和试验方法 |
China National Standards SH |
English PDF |
| GB/T 20485.43-2021 |
Methods for the calibration of vibration and SHock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准 |
China National Standards SH |
English PDF |
| GB/T 20485.32-2021 |
Methods for the calibration of vibration and SHock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第32部分：谐振测试 用冲击激励测试加速度计的频率和相位响应 |
China National Standards SH |
English PDF |
| GB/T 10836-2021 |
SHipboard multifunctional incinerators 船用多功能焚烧炉 |
China National Standards SH |
English PDF |
| GB/T 9286-2021 |
Paints and varniSHes—Cross-cut test 色漆和清漆 划格试验 |
China National Standards SH |
English PDF |
| GB/T 7187.1-2021 |
Fuel oil consumption for transportation SHips—Part 1: Calculation method for marine ships 运输船舶燃油消耗量 第1部分：海洋船舶计算方法 |
China National Standards SH |
English PDF |
| GB/T 6328-2021 |
Test method for SHear impact strength of adhesive bonds 胶粘剂剪切冲击强度试验方法 |
China National Standards SH |
English PDF |
| GB/T 5211.14-2021 |
General methods of test for pigments and extenders—Part 14: Determination of residue on sieve—Mechanical fluSHing procedure 颜料和体质颜料通用试验方法 第14部分：筛余物的测定 机械冲洗法 |
China National Standards SH |
English PDF |
| GB/T 1392-2021 |
SHips and marine technology—Deck machinery—Accommodation ladder winches 船舶与海洋技术 甲板机械 舷梯绞车 |
China National Standards SH |
English PDF |
| GB/T 20326-2021 |
Long full-diameter SHank taps with recess 粗长柄机用丝锥 |
China National Standards SH |
English PDF |
| GB/T 19963.1-2021 |
Technical specification for connecting wind farm to power system—Part 1: On SHore wind power 风电场接入电力系统技术规定 第1部分：陆上风电 |
China National Standards SH |
English PDF |
| GB/T 18703-2021 |
Mechanical vibration and SHock—Hand-arm vibration—Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand 机械振动与冲击 手传振动 手套掌部振动传递率的测量与评价 |
China National Standards SH |
English PDF |
| GB/T 40497-2021 |
Evaluation principles for the design of offSHore facilities against fire and blast loading 海上设施防火与防爆设计评估原则 |
China National Standards SH |
English PDF |
| GB/T 40495-2021 |
SHips and marine technology—Loose gear for marine lifting appliances on ships—General technical requirement 船舶和海上技术 船用起重设备可拆卸零部件 一般技术要求 |
China National Standards SH |
English PDF |
| GB/T 40493-2021 |
Determination of lead, cadmium, chromium and mercury content in the finiSHing material of wood-based panel 人造板饰面材料中铅、镉、铬、汞重金属元素含量测定 |
China National Standards SH |
English PDF |
| GB/T 40481-2021 |
Dimensions and performance requirements of general-purpose slip SHeet pallets for through transit of goods 联运通用滑板托盘尺寸及性能要求 |
China National Standards SH |
English PDF |
| GB 40554.1-2021 |
Code of safety practice for offSHore oil & gas exploration and production—Part 1:General 海洋石油天然气开采安全规程 第1部分：总则 |
China National Standards SH |
English PDF |
| GB 40558-2021 |
The safety requirements for marine SHipping solid bulk cargoes 固体散装货物海运安全技术要求 |
China National Standards SH |
English PDF |
| GB 40557-2021 |
Specification for safe navigation of inland waterways high speed passenger SHip 内河高速客船安全航行技术条件 |
China National Standards SH |
English PDF |
| GB 40556-2021 |
Technical requirements for flooding emergency operation of sea-going SHip engine room 海船机舱进水应急操作技术要求 |
China National Standards SH |
English PDF |
| GB 40555-2021 |
Technical requirements for firefighting emergency operation of sea-going SHip engine room 海船机舱消防应急操作技术要求 |
China National Standards SH |
English PDF |
| GB 17566-2021 |
Muster list for seagoing transport merchant SHip 海洋运输船舶应变部署表 |
China National Standards SH |
English PDF |
| GB 16161-2021 |
Regulations for the SHape of the marks of maritime buoyage system in China 中国海区水上助航标志形状显示规定 |
China National Standards SH |
English PDF |
| GB 40560-2021 |
Technical specification for authentication capability of RMB caSH authentication machines 人民币现金机具鉴别能力技术规范 |
China National Standards SH |
English PDF |
| GB/T 40144-2021 |
Collaborative business relationSHip management systems —Requirements and framework 协作业务关系管理体系 要求和框架 |
China National Standards SH |
English PDF |
| GB/T 40181-2021 |
Test method and evaluation for fluSHability of disposable sanitary nonwoven materials 一次性卫生用非织造材料的可冲散性试验方法及评价 |
China National Standards SH |
English PDF |
| GB/T 40263-2021 |
Textiles—Determination of SHort chain chlorinated paraffins 纺织品 短链氯化石蜡的测定 |
China National Standards SH |
English PDF |
| GB/T 40255-2021 |
Code of diagnosis for infection with hepatopancreatic parvovirus of penaeid SHrimp—PCR method 对虾肝胰腺细小病毒病诊断规程 PCR检测法 |
China National Standards SH |
English PDF |
| GB/T 40168-2021 |
Corrugating medium—Determination of the edge cruSH resistance after laboratory fluting 瓦楞芯纸 实验室起楞后边压强度的测定 |
China National Standards SH |
English PDF |
| GB/T 40157-2021 |
SHawutou pig 沙乌头猪 |
China National Standards SH |
English PDF |
| GB/T 40156-2021 |
MeiSHan pig 梅山猪 |
China National Standards SH |
English PDF |
| GB/T 40128-2021 |
Surface chemical analysis—Atomic force microscopy—Test method for thickness of the two-dimensional layered molybdenum disulfide nanoSHeets 表面化学分析 原子力显微术 二硫化钼片层材料厚度测量方法 |
China National Standards SH |
English PDF |
| GB/T 39989-2021 |
Superelastic titanium-nickel SHape memory alloy bar and wire 超弹性钛镍形状记忆合金棒材和丝材 |
China National Standards SH |
English PDF |
| GB/T 39985-2021 |
Titanium-nickel SHape memory alloy plate 钛镍形状记忆合金板材 |
China National Standards SH |
English PDF |
| GB/T 39977-2021 |
General technical requirements for aquarium poly(methyl methacrylate) SHeets 水族馆用聚甲基丙烯酸甲酯板材通用技术要求 |
China National Standards SH |
English PDF |
| GB/T 39971-2021 |
ThreSHolds and grading of relative wet grip index for motor vehicle tyres 汽车轮胎湿路面相对抓着指数限值和等级 |
China National Standards SH |
English PDF |
| GB/T 39970-2021 |
ThreSHolds and grading of coast-by noise for motor vehicle tyres 汽车轮胎惯性滑行通过噪声限值和等级 |
China National Standards SH |
English PDF |
| GB/T 38329.2-2021 |
Utility connections in port - Part 2: High and low voltage SHore connection systems - Data communication for monitoring and control 港口船岸连接 第2部分：高压和低压岸电连接系统 监测和控制的数据传输 |
China National Standards SH |
English PDF |
| GB/T 29716.3-2021 |
Mechanical vibration and SHock—Signal processing—Part 3:Methods of time-frequency analysis 机械振动与冲击 信号处理 第3部分：时频分析方法 |
China National Standards SH |
English PDF |
| GB/T 25672-2021 |
Hammer drill bit and SHell hammer drill bit 电锤钻和套式电锤钻 |
China National Standards SH |
English PDF |
| GB/T 17751-2021 |
Survey-evaluation method of energy utilization for transport SHips 运输船舶能源利用监测评价方法 |
China National Standards SH |
English PDF |
| GB/T 12265-2021 |
Safety of machinery—Minimum gaps to avoid cruSHing of parts of the human body 机械安全 防止人体部位挤压的最小间距 |
China National Standards SH |
English PDF |
| GB/T 12190-2021 |
Method for measuring the SHielding effectiveness of electromagnetic shielding enclosures 电磁屏蔽室屏蔽效能的测量方法 |
China National Standards SH |
English PDF |
| GB/T 9966.11-2021 |
Test methods for natural stone—Part 11: Determination of resistance to ageing by cold and thermal SHock 天然石材试验方法 第11部分：激冷激热加速老化强度测定 |
China National Standards SH |
English PDF |
| GB/T 6546-2021 |
Corrugated fibreboard—Determination of edgewise cruSH resistance 瓦楞纸板 边压强度的测定 |
China National Standards SH |
English PDF |
| GB/T 19216.3-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with SHock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards SH |
English PDF |
| GB/T 19216.2-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with SHock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 |
China National Standards SH |
English PDF |
| GB/T 19216.1-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with SHock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 |
China National Standards SH |
English PDF |
| GB 16993-2021 |
Safety regulations for avoid working under hazardous condition of oxygen deficiency in enclosed spaces aboard SHips 防止船舶封闭处所缺氧危险作业安全规程 |
China National Standards SH |
English PDF |
| GB/T 39916-2021 |
Guidelines for the establiSHment of plant quarantine system in entry and exit container depot 进出境集装箱场站植物检疫防疫体系建立指南 |
China National Standards SH |
English PDF |
| GB/T 36625.4-2021 |
Smart city-Data fusion-Part 4:Opening and SHaring requirements 智慧城市 数据融合 第4部分：开放共享要求 |
China National Standards SH |
English PDF |
| GB/T 26667-2021 |
Terminology for electromagnetic SHielding materials 电磁屏蔽材料术语 |
China National Standards SH |
English PDF |
| GB/T 19346.3-2021 |
Methods of measurement of amorphous and nanocrystalline alloys-Part 3:AC magnetic properties of Fe-based amorphous strip using a single SHeet specimen 非晶纳米晶合金测试方法 第3部分：铁基非晶单片试样交流磁性能 |
China National Standards SH |
English PDF |
| GB/T 9966.10-2021 |
Test methods for natural stone-Part 10:Determination of resistance to SHaking for individual stone anchoragest 天然石材试验方法 第10部分：挂件组合单元抗震性能的测定 |
China National Standards SH |
English PDF |
| GB/T 39890-2021 |
SHoulder abduction orthoses with upright 支条式肩外展矫形器 |
China National Standards SH |
English PDF |
| GB/T 39963-2021 |
Technical specification on C80~C100 concrete SHaft lining applied in vertical freezing shaft 立井冻结法凿井井壁应用C80～C100混凝土技术规程 |
China National Standards SH |
English PDF |
| GB/T 39940-2021 |
Footwear manufacturing machines—Modular SHoe repair equipment—Safety requirements 制鞋机械 组合式修鞋机 安全要求 |
China National Standards SH |
English PDF |
| GB/T 39929-2021 |
Footwear manufacturing machines—SHoe and leather presses—Safety requirements 制鞋机械 压合成型机 安全要求 |
China National Standards SH |
English PDF |
| GB/T 39967-2021 |
5-axis simultaneous machining center -- Accuracy of S-SHaped test piece 五轴联动加工中心 S形试件精度检验 |
China National Standards SH |
English PDF |
| GB/T 39961-2021 |
Ball screw assembly -- Dimension of SHaft-end type screw 滚珠丝杠副 支承结构型式尺寸 |
China National Standards SH |
English PDF |
| GB/T 39937-2021 |
Plastics—Extruded SHeets of polypropylene (PP)—Requirements and test methods 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法 |
China National Standards SH |
English PDF |
| GB/T 39936-2021 |
Plastics—Extruded SHeets of polypropylene (PP)—Requirements and test methods 深冷保冷用泡沫塑料 |
China National Standards SH |
English PDF |
| GB/T 39935-2021 |
Plastics—Film and SHeeting—Determination of blocking resistance 塑料制品 薄膜和片材 抗粘连性的测定 |
China National Standards SH |
English PDF |
| GB/T 39934-2021 |
Plastics—Film and SHeeting—Determination of blocking resistance 家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法 |
China National Standards SH |
English PDF |
| GB/T 39894-2021 |
Evaluation items and requirements of interior decoration for SHip 船舶内装质量评定项目及要求 |
China National Standards SH |
English PDF |
| GB/T 39818-2021 |
Plastics—Thermosetting moulding materials—Determination of SHrinkage 塑料 热固性模塑材料 收缩率的测定 |
China National Standards SH |
English PDF |
| GB/T 39801-2021 |
General technical specifications of membrane distillation device for seawater and brackiSH water desalination 海水或苦咸水淡化用膜蒸馏装置通用技术规范 |
China National Standards SH |
English PDF |
| GB/T 39799-2021 |
Dimension,SHape,weight and tolerances for titanium and titanium alloy bars and wires 钛及钛合金棒材和丝材尺寸、外形、重量及允许偏差 |
China National Standards SH |
English PDF |
| GB/T 39761.1-2021 |
Green product assessment—Household electric appliances—Part 1：Refrigerators, air-conditioners and waSHing machines 绿色产品评价 家用电器 第1部分：电冰箱、空调器和洗衣机 |
China National Standards SH |
English PDF |
| GB/T 39754-2021 |
Hot dip coating steel SHeet and strip for corrugated pipe 波纹管用热镀层钢板及钢带 |
China National Standards SH |
English PDF |
| GB/T 39743-2021 |
Plain bearings—Thermoplastic buSHes—Dimensions and tolerance 滑动轴承 热塑性塑料轴套 尺寸与公差 |
China National Standards SH |
English PDF |
| GB/T 39741.2-2021 |
Plain bearings—Tolerances—Part 2：Tolerances on geometrical characteristics and surface roughness for SHafts and thrust collars 滑动轴承 公差 第2部分：轴和止推轴肩的几何公差及表面粗糙度 |
China National Standards SH |
English PDF |
| GB/T 39600-2021 |
Formaldehyde emission grading for wood-based panel and finiSHing products 人造板及其制品甲醛释放量分级 |
China National Standards SH |
English PDF |
| GB/T 35060.4-2021 |
General specification of SHearer—Part 4: Electric control system 滚筒采煤机通用技术条件 第4部分:电气控制系统 |
China National Standards SH |
English PDF |
| GB/T 33780.5-2021 |
Technical specification of electronic government common platform based on cloud computing -- Part 5: The architecture for information resource opening and SHaring 基于云计算的电子政务公共平台技术规范 第5部分：信息资源开放共享系统架构 |
China National Standards SH |
English PDF |
| GB/T 30027-2021 |
Round steel SHort link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade VH 起重用钢制短环链 手动链式葫芦用高精度链 VH级 |
China National Standards SH |
English PDF |
| GB/T 30026-2021 |
Round steel SHort link chains for lifting purposes—Fine tolerance hoist chains for hand operated chain hoists—Grade TH 起重用钢制短环链 手动链式葫芦用高精度链 TH级 |
China National Standards SH |
English PDF |
| GB/T 13174-2021 |
Determination of detergency and cycle of waSHing property for laundry detergents 衣料用洗涤剂去污力及循环洗涤性能的测定 |
China National Standards SH |
English PDF |
| GB/T 12975-2021 |
General specification for synchronous generator in SHips 船用同步发电机通用技术条件 |
China National Standards SH |
English PDF |
| GB/T 10006-2021 |
Plastics—Film and SHeeting—Determination of the coefficients of friction 塑料 薄膜和薄片 摩擦系数的测定 |
China National Standards SH |
English PDF |
| GB/T 10001.5-2021 |
Public information graphical symbols—Part 5: Symbols for SHopping 公共信息图形符号 第5部分：购物符号 |
China National Standards SH |
English PDF |
| GB/T 5095.2303-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c：SHielding effectiveness of connectors and accessories—Line injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分：屏蔽和滤波试验 试验23c：连接器和附件的屏蔽效果 线注入法 |
China National Standards SH |
English PDF |
| Find out:4069Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 |
+86-755-25831330
