GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 23368.2-2009 |
Methods for chemical analysis of ammonium metatungstate - Part 2: Determination of zinc content - Flame atomic absorption spectrometry 偏钨酸铵化学分析方法 第2部分:锌量的测定 火焰原子吸收光谱法 |
China National Standards si |
English PDF |
GB/T 23368.1-2009 |
Methods for chemical analysis of ammonium metatungstate - Part 1: Determination of water insoluble content - Gravimetric analysis 偏钨酸铵化学分析方法 第1部分:水不溶物量的测定 称量法 |
China National Standards si |
English PDF |
GB/T 23367.2-2009 |
Methods for chemical analysis of lithium cobalt oxide - Part 2: Determination of lithium,nickel,manganese,magnesium,aluminium,iron,sodium,calcium and copper content - Inductively coupled plasma atomic emission spectrometry 钴酸锂化学分析方法 第2部分:锂、镍、锰、镁、铝、铁、钠、钙和铜量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards si |
English PDF |
GB/T 23367.1-2009 |
Methods for chemical analysis of lithium cobalt oxide - Part 1: Determination of cobalt content - EDTA titration 钴酸锂化学分析方法 第1部分:钴量的测定 EDTA滴定法 |
China National Standards si |
English PDF |
GB/T 23364.6-2009 |
Methods for chemical analysis of high purity indium oxide - Part 6: Determination of the loss on ignition - Gravimetric analysis 高纯氧化铟化学分析方法 第6部分:灼减量的测定 称量法 |
China National Standards si |
English PDF |
GB/T 23364.5-2009 |
Methods for chemical analysis of high purity indium oxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry 高纯氧化铟化学分析方法 第5部分:氯量的测定 硫氰酸汞分光光度法 |
China National Standards si |
English PDF |
GB/T 23364.4-2009 |
Methods for chemical analysis of high purity indium oxide - Part 4: Determination of aluminum, iron, copper, zinc, cadmium, lead and thallium content - Inductively coupled plasma mass spectrometry 高纯氧化铟化学分析方法 第4部分:铝、铁、铜、锌、镉、铅和铊量的测定 电感耦合等离子体质谱法 |
China National Standards si |
English PDF |
GB/T 23364.3-2009 |
Methods for chemical analysis of high purity indium oxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry 高纯氧化铟化学分析方法 第3部分:锑量的测定 原子荧光光谱法 |
China National Standards si |
English PDF |
GB/T 23364.2-2009 |
Methods for chemical analysis of high purity indium oxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry 高纯氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法 |
China National Standards si |
English PDF |
GB/T 23364.1-2009 |
Methods for chemical analysis of high purity indium oxide - Part 1: Determination of arsenic content - Atomic fluorescence spectrometry 高纯氧化铟化学分析方法 第1部分:砷量的测定 原子荧光光谱法 |
China National Standards si |
English PDF |
GB/T 23362.6-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 6: Determination of the loss on ignition - Gravimetric analysis 高纯氢氧化铟化学分析方法 第6部分:灼减量的测定 称量法 |
China National Standards si |
English PDF |
GB/T 23362.5-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry 高纯氢氧化铟化学分析方法 第5部分:氯量的测定 硫氰酸汞分光光度法 |
China National Standards si |
English PDF |
GB/T 23362.4-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 4: Determination of aluminum, iron, copper, zinc, cadmium, lead and thallium content - Inductively coupled plasma mass spectrometry 高纯氢氧化铟化学分析方法 第4部分:铝、铁、铜、锌、镉、铅和铊量的测定 电感耦合等离子体质谱法 |
China National Standards si |
English PDF |
GB/T 23362.3-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry 高纯氢氧化铟化学分析方法 第3部分:锑量的测定 原子荧光光谱法 |
China National Standards si |
English PDF |
GB/T 23362.2-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry 高纯氢氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法 |
China National Standards si |
English PDF |
GB/T 23362.1-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 1: Determination of arsenic content - Atomic fluorescence spectrometry 高纯氢氧化铟化学分析方法 第1部分:砷量的测定 原子荧光光谱法 |
China National Standards si |
English PDF |
GB/T 23327-2009 |
Woven fusible interlinings 机织热熔粘合衬 |
China National Standards si |
English PDF |
GB/T 23321-2009 |
Textiles - Water resistance - Rain tests: Exposure to a horizontal water spray 纺织品 防水性 水平喷射淋雨试验 |
China National Standards si |
English PDF |
GB/T 23320-2009 |
Textiles - Determination of resistance to water absorption - Tumble-jar absorption test 纺织品 抗吸水性的测定 翻转吸收法 |
China National Standards si |
English PDF |
GB/T 23318-2009 |
Textiles - Determination of resistance to puncture 纺织品 刺破强力的测定 |
China National Standards si |
English PDF |
GB/T 19981.4-2009 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning 纺织品 织物和服装的专业维护、干洗和湿洗 第4部分:使用模拟湿清洗和整烫时性能试验的程序 |
China National Standards si |
English PDF |
GB/T 19981.3-2009 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvent 纺织品 织物和服装的专业维护、干洗和湿洗 第3部分:使用烃类溶剂干洗和整烫时性能试验的程序 |
China National Standards si |
English PDF |
GB/T 1335.3-2009 |
Standard sizing systems for garments - Children 服装号型 儿童 |
China National Standards si |
English PDF |
GB/T 12704.2-2009 |
Textiles - Test method for water-vapour transmission of fabrics - Part 2: Water method 纺织品 织物透湿性试验方法 第2部分:蒸发法 |
China National Standards si |
English PDF |
GB/T 12704.1-2009 |
Textiles - Test method for water-vapour transmission of fabrics - Part 1: Desiccant method 纺织品 织物透湿性试验方法 第1部分:吸湿法 |
China National Standards si |
English PDF |
GB/T 4909.6-2009 |
Test methods for bare wires - Part 6: Bend test - single bend test 裸电线试验方法 第6部分:弯曲试验 单向弯曲 |
China National Standards si |
English PDF |
GB/T 4909.4-2009 |
Test methods for bare wires - Part 4: Torsion test 裸电线试验方法 第4部分:扭转试验 |
China National Standards si |
English PDF |
GB/T 4909.3-2009 |
Test methods for bare wires - Part 3: Tensile test 裸电线试验方法 第3部分:拉力试验 |
China National Standards si |
English PDF |
GB/T 4909.2-2009 |
Test methods for bare wires - Part 2: Measurement of dimensions 裸电线试验方法 第2部分:尺寸测量 |
China National Standards si |
English PDF |
GB/T 23309-2009 |
Aluminium-magnesium alloy wires for shield in cable 电缆屏蔽用铝镁合金线 |
China National Standards si |
English PDF |
GB/T 23308-2009 |
Aluminium-magnesium-silicon alloy wire for overhead line conductors 架空绞线用铝-镁-硅系合金圆线 |
China National Standards si |
English PDF |
GB/T 23307-2009 |
Floor socket-outlets for household and similar purposes 家用和类似用途地面插座 |
China National Standards si |
English PDF |
GB/T 23306-2009 |
Specifications for flameproof three-phase asynchronous motors for use on dispensers (frame size 63 to 100) 燃油加油机用隔爆型三相异步电动机(机座号63~100)技术条件 |
China National Standards si |
English PDF |
GB/T 23294-2009 |
Abrasion resistant refractory materials 耐磨耐火材料 |
China National Standards si |
English PDF |
GB/T 19520.15-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分:基于连接器的插箱和插件的接口尺寸 |
China National Standards si |
English PDF |
GB/T 19520.14-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-103: Keying and alignment pin 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-103部分:编码键和定位销 |
China National Standards si |
English PDF |
GB/T 19520.13-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-102: Injector/extractor handle 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-102部分:插拔器手柄 |
China National Standards si |
English PDF |
GB/T 19520.12-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-101部分:插箱及其插件 |
China National Standards si |
English PDF |
GB/T 19290.5-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack 发展中的电子设备构体机械结构模数序列 第2-3部分:分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards si |
English PDF |
GB/T 19290.4-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subrac 发展中的电子设备构体机械结构模数序列 第2-2部分:分规范 25mm设备构体的接口协调尺寸 详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards si |
English PDF |
GB/T 17363.2-2009 |
Nondestructive mensuration of gold content in the gold products - Part 2: Method of compositive determine 黄金制品金含量无损测定方法 第2部分:综合测定方法 |
China National Standards si |
English PDF |
GB/T 17363.1-2009 |
Nondestructive mensuration of gold content in the gold products - Part 1: Method of electron probe microanalysis 黄金制品金含量无损测定方法 第1部分:电子探针微分析法 |
China National Standards si |
English PDF |
GB 50492-2009 |
Code for design of PET plant 聚酯工厂设计规范 |
China National Standards si |
English PDF |
GB 50488-2009 |
Code for design of acrylic fibres plant 腈纶工厂设计规范 |
China National Standards si |
English PDF |
GB/T 8190.11-2009 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions 往复式内燃机 排放测量 第11部分:非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量 |
China National Standards si |
English PDF |
GB/T 4759-2009 |
Exhaust silencers for internal combustion engines - Measurement procedure 内燃机排气消声器 测量方法 |
China National Standards si |
English PDF |
GB/T 22792.1-2009 |
Office furniture - Screens - Part 1: Dimensions 办公家具 屏风 第1部分:尺寸 |
China National Standards si |
English PDF |
GB/T 13217.8-2009 |
Test method for blocking resistance of liquid ink 液体油墨抗粘连检验方法 |
China National Standards si |
English PDF |
GB/T 13217.7-2009 |
Test method for adhesion to substrate of liquid ink with tape 液体油墨附着牢度检验方法 |
China National Standards si |
English PDF |
GB 50493-2009 |
Specification for design of combustible gas and toxic gas detection and alarm for petrochemical industry 石油化工可燃气体和有毒气体检测报警设计规范 |
China National Standards si |
English PDF |
GB 50489-2009 |
Code for Design of General Plot Plan and Transportation of Chemical Industrial Enterprises 化工企业总图运输设计规范 |
China National Standards si |
English PDF |
GB 50483-2009 |
Code for design of environmental protectin of chemical industry projects 化工建设项目环境保护设计规范 |
China National Standards si |
English PDF |
GB/T 786.1-2009 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols for conventional use and data-processing applications 流体传动系统及元件图形符号和回路图 第1部分:用于常规用途和数据处理的图形符号 |
China National Standards si |
English PDF |
GB/T 3177-2009 |
Geometrical product specifications (GPS) - Inspection of plain workpiece sizes 产品几何技术规范(GPS) 光滑工件尺寸的检验 |
China National Standards si |
English PDF |
GB/T 23935-2009 |
Design of cylindrical helical springs 圆柱螺旋弹簧设计计算 |
China National Standards si |
English PDF |
GB/T 23934-2009 |
Hot coiled helical compression springs - Technical specifications 热卷圆柱螺旋压缩弹簧 技术条件 |
China National Standards si |
English PDF |
GB/T 2089-2009 |
Cylindrical coiled compression spring dimensions and parameters 普通圆柱螺旋压缩弹簧尺寸及参数(两端圈并紧磨平或制扁) |
China National Standards si |
English PDF |
GB/T 2088-2009 |
Cylindrical coiled tension spring dimensions and parameters 普通圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards si |
English PDF |
GB/T 1358-2009 |
Cylindrical helical spring seriate sizes 圆柱螺旋弹簧尺寸系列 |
China National Standards si |
English PDF |
GB/T 1239.3-2009 |
Cold coiled helical springs technical specifiations - Part 3: Torsion spring 冷卷圆柱螺旋弹簧技术条件 第3部分:扭转弹簧 |
China National Standards si |
English PDF |
GB/T 1239.2-2009 |
Cold coiled helical springs technical specifications - Part 2: Compressions spring 冷卷圆柱螺旋弹簧技术条件 第2部分:压缩弹簧 |
China National Standards si |
English PDF |
GB/T 1239.1-2009 |
Cold coiled helical springs technical specifications - Part 1: Extension spring 冷卷圆柱螺旋弹簧技术条件 第1部分:拉伸弹簧 |
China National Standards si |
English PDF |
GB/T 23258-2009 |
Standard practice controlling internal corrosion in steel pipelines 钢质管道内腐蚀控制规范 |
China National Standards si |
English PDF |
GB/T 21412.6-2009 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems 石油天然气工业 水下生产系统的设计与操作 第6部分:水下生产控制系统 |
China National Standards si |
English PDF |
GB/T 21412.3-2009 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems 石油天然气工业 水下生产系统的设计与操作 第3部分:过出油管(TFL)系统 |
China National Standards si |
English PDF |
GB/T 15722-2009 |
Competitive qualification of medical stardard of volleyballsitting for disabled athletes 残疾人坐地排球运动员参赛资格的医学标准 |
China National Standards si |
English PDF |
GB/T 14726-2009 |
Medical and functional classification for disabled athletes 残疾运动员的医学和功能分级 |
China National Standards si |
English PDF |
GB 4075-2009 |
Sealed radioactive sources - General requirements and classification 密封放射源 一般要求和分级 |
China National Standards si |
English PDF |
GB 13172-2009 |
Molybdenum 99 - Technetium 99m chromatographic generator (fission) 裂变钼99 - 锝99m 色层发生器 |
China National Standards si |
English PDF |
GB/T 5465.1-2009 |
Graphical symbols for use on electrical equipment - Part 1: Overview and classification 电气设备用图形符号 第1部分:概述与分类 |
China National Standards si |
English PDF |
GB/T 23371.3-2009 |
Basic principles for graphical symbols for use on electrical equipment - Part 3: Guidelines for the application of graphical symbols 电气设备用图形符号基本规则 第3部分:应用导则 |
China National Standards si |
English PDF |
GB/T 23371.2-2009 |
Basic principles for graphical symbols for use on electrical equipment - Part 2: Form and use of arrows 电气设备用图形符号基本规则 第2部分:箭头的形式与使用 |
China National Standards si |
English PDF |
GB/T 17564.4-2009 |
Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes 电气元器件的标准数据元素类型和相关分类模式 第4部分:IEC标准数据元素类型和元器件类别基准集 |
China National Standards si |
English PDF |
GB/T 16901.3-2009 |
Rules for the presentation of graphical symbols - Graphical symbols for use in the technical documentation of products - Part 3: Classification of connect notes, networks and their encoding 技术文件用图形符号表示规则 第3部分:连接点、网络的分类及其编码 |
China National Standards si |
English PDF |
GB/T 16679-2009 |
Industrial systems,installations and equipment and industrial products - Designation of signals 工业系统、装置与设备以及工业产品 信号代号 |
China National Standards si |
English PDF |
GB/T 14588-2009 |
Technical regulations for environmental management of reactor decommissioning 反应堆退役环境管理技术规定 |
China National Standards si |
English PDF |
GB/T 13366-2009 |
Caesiam-137 gamma radiation source for industrial gauges 工业仪表用铯 137γ辐射源 |
China National Standards si |
English PDF |
GB/T 6379.6-2009 |
Accuracy(trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values 测量方法与结果的准确度(正确度与精密度) 第6部分:准确度值的实际应用 |
China National Standards si |
English PDF |
GB/T 4880.3-2009 |
Codes for the representation of names of languages - Part 3: Alpha-3 code for comprehensive coverage of languages 语种名称代码 第3部分:所有语种的3字母代码 |
China National Standards si |
English PDF |
GB/T 3533.1-2009 |
Assessing economic effect of standardization - Part 1: Principles and calculating methods 标准化经济效果评价 第1部分:原则和计算方法 |
China National Standards si |
English PDF |
GB/T 23560-2009 |
Classification code for clothing 服装分类代码 |
China National Standards si |
English PDF |
GB/T 23251-2009 |
Guideline for coal used in coal chemical conversion 煤化工用煤技术导则 |
China National Standards si |
English PDF |
GB/T 23248-2009 |
Code for design of seawater treatment for recirculating cooling seawater system 海水循环冷却水处理设计规范 |
China National Standards si |
English PDF |
GB/T 18437.2-2009 |
The technical criterion of refitting for vehicle by using gas - Part 2: Liquid petrol gas automobile 燃气汽车改装技术要求 第2部分:液化石油气汽车 |
China National Standards si |
English PDF |
GB/T 18437.1-2009 |
The technical criterion of refitting for vehicle by using gas - Part 1: Compressed natural gas automobile 燃气汽车改装技术要求 第1部分:压缩天然气汽车 |
China National Standards si |
English PDF |
GB/T 23264-2009 |
Brake lining assembly for electric power assist bicycles 电动自行车用制动衬片总成 |
China National Standards si |
English PDF |
GB/T 23259-2009 |
sight glass for pressure vessels 压力容器用视镜玻璃 |
China National Standards si |
English PDF |
GB/T 12988-2009 |
Test method for abrasion resistance of inorganic paving materials 无机地面材料耐磨性能试验方法 |
China National Standards si |
English PDF |
GB/T 11837-2009 |
Test methods of the concrete compressive strength of concrete pipes for water 混凝土管用混凝土抗压强度试验方法 |
China National Standards si |
English PDF |
GB/T 6383-2009 |
The method of vibration cavitation erosion test 振动空蚀试验方法 |
China National Standards si |
English PDF |
GB/T 16305-2009 |
Torsional vibration absorbers 扭转振动减振器 |
China National Standards si |
English PDF |
GB/T 14652.2-2009 |
Small craft - Non-fire-resistant fuel hoses 小艇 非耐火燃油软管 |
China National Standards si |
English PDF |
GB/T 14652.1-2009 |
Small craft - Fire-resistant fuel hoses 小艇 耐火燃油软管 |
China National Standards si |
English PDF |
GB/T 13030-2009 |
Specification for electric propulsion plant of ship 船舶电力推进系统技术条件 |
China National Standards si |
English PDF |
GB/T 12522-2009 |
Stainless steel bellows expansion joints 不锈钢波形膨胀节 |
China National Standards si |
English PDF |
GB/T 11700-2009 |
Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations 小艇 船用推进往复式内燃机 功率的测定和标定 |
China National Standards si |
English PDF |
GB/T 14163-2009 |
Classification of working-hours consumption symbols and composition of standard working-hours 工时消耗分类、代号和标准工时构成 |
China National Standards si |
English PDF |
GB/T 23239-2009 |
Diagnostic techniques for trypanosomosis evansi 伊氏锥虫病诊断技术 |
China National Standards si |
English PDF |
GB/T 17823-2009 |
Veterinary requirements of prevention and control of diseases for intensive pig farm 集约化猪场防疫基本要求 |
China National Standards si |
English PDF |
GB 23290-2009 |
Machine-tools safety - Safety requirements for the design and construction of work holding chucks 机床安全 卡盘的设计和结构安全要求 |
China National Standards si |
English PDF |
Find out:17019Items | To Page of: First -Previous-Next -Last | [108] [109] [110] [111] [112] [113] [114] |