Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 2080-2007 |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions 带圆角沉孔固定的硬质合金可转位刀片尺寸 |
China National Standards ions |
 English PDF |
| GB/T 2078-2007 |
Indexable hardmetal(carbide) insers with rounded corners, with cylindrical fixing hole - Dimensions 带圆角圆孔固定的硬质合金可转位刀片尺寸 |
China National Standards ions |
English PDF |
| GB/Z 21193.3-2007 |
Fossil-fired steam power stations - Part 3: Steam-temperature controls 矿物燃烧蒸汽发电站 第3部分：蒸汽温度控制 |
China National Standards ions |
English PDF |
| GB/Z 21193.1-2007 |
Fossil-fired steam power stations - Part 1: Limiting controls 矿物燃烧蒸汽发电站 第1部分: 限幅控制 |
China National Standards ions |
English PDF |
| GB/Z 21192-2007 |
Space and fixing dimensions for electricity energy meter 电能表外形和安装尺寸 |
China National Standards ions |
English PDF |
| GB/T 778.1-2007 |
Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 1: Specifications 封闭满管道中水流量的测量 饮用冷水水表和热水水表 第1部分：规范 |
China National Standards ions |
English PDF |
| GB/T 21195-2007 |
The specifications of antenna for mobile communication indoor distributed system 移动通信室内信号分布系统 天线技术条件 |
China National Standards ions |
English PDF |
| GB/T 21194-2007 |
Generic reliability assurance requirements for optoelectronic devices used in telecommunications equipment 通信设备用的光电子器件的可靠性通用要求 |
China National Standards ions |
English PDF |
| GB/T 17248.6-2007 |
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity 声学 机器和设备发射的噪声 声强法现场测定工作位置和其它指定位置发射声压级的工程法 |
China National Standards ions |
English PDF |
| GB/T 2260-2007 |
Codes for the administrative divisions of the People’s Republic of China 中华人民共和国行政区划代码 |
China National Standards ions |
English PDF |
| GB/T 21161-2007 |
Agricultural trailers - Single-acting telescopic tipping cylinders - 25MPa(250bar)series - Types1，2and3 - Interchangeability dimensions 农用挂车 单作用套筒伸缩油缸25MPa（250bar）系列Ⅰ型、Ⅱ型和Ⅲ型互换尺寸 |
China National Standards ions |
English PDF |
| GB/T 21159.2-2007 |
Equipment for sowing and planting - Disk - part 2: Flat disks type D2 with single bevel - Dimensions 播种和种植机械 圆盘 第2部分：D2型单边倒角的平面圆盘 尺寸 |
China National Standards ions |
English PDF |
| GB/T 21159.1-2007 |
Equipment for sowing and planting - Disks - part 1: Concave disks type D1 - Dimensions 播种和种植机械 圆盘 第1部分：D1型凹面圆盘 尺寸 |
China National Standards ions |
English PDF |
| GB/T 21153-2007 |
Earth-moving machinery - Units for dimensions, performance and capacities, and their measurement accuracies 土方机械 尺寸、性能和参数的单位与测量准确度 |
China National Standards ions |
English PDF |
| GB/T 10416-2007 |
Agricultural machinery - Endless variable - speed V-belts and groove sections of corresponding pulleys 农业机械 环形变速V带及带轮轮槽截面 |
China National Standards ions |
English PDF |
| GB/T 10415-2007 |
Agricultural machinery - Endless hexagonal belts and groove sections of corresponding pulleys 农业机械 环形六角带及带轮轮槽截面 |
China National Standards ions |
English PDF |
| GB/T 21247-2007 |
Specifications for identification system of spilled oil on the sea 海面溢油鉴别系统规范 |
China National Standards ions |
English PDF |
| GB/T 21141-2007 |
Technical regulations for sandification prevention and control 防沙治沙技术规范 |
China National Standards ions |
English PDF |
| GB/T 2934-2007 |
General-purpose flat pallets for through transit of goods - Principal dimensions and tolerances 联运通用平托盘 主要尺寸及公差 |
China National Standards ions |
English PDF |
| GB/T 21113-2007 |
Reels for 16mm motion picture projectors - Dimensions 16mm电影放映机片夹尺寸 |
China National Standards ions |
English PDF |
| GB/T 21112-2007 |
Projector slides - Dimensions 幻灯片 尺寸 |
China National Standards ions |
English PDF |
| GB/T 21110-2007 |
Projectors - Image size/projection distance calculations 放映设备 画面尺寸和放映距离的计算 |
China National Standards ions |
English PDF |
| GB/T 21109.1-2007 |
Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements 过程工业领域安全仪表系统的功能安全 第1部分：框架、定义、系统、硬件和软件要求 |
China National Standards ions |
English PDF |
| GB/T 21093-2007 |
High-pressure mercury vapour lamps - Performance specifications 高压汞灯 性能要求 |
China National Standards ions |
English PDF |
| GB/Z 6113.403-2007 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3：Uncertainties,statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分：不确定度、统计学和限值建模 批量产品的EMC符合性确定的统计考虑 |
China National Standards ions |
English PDF |
| GB/T 21083-2007 |
Bank operations - Standard scheme for drawing lists 银行业务 债券提款单的标准格式 |
China National Standards ions |
English PDF |
| GB/T 21077.2-2007 |
Banking - Certificate management - Part 2: Certificate extensions 银行业务 证书管理 第2部分: 证书扩展项 |
China National Standards ions |
English PDF |
| GB/T 12184-2007 |
Information processing - Magnetic ink character recognition - Print specifications 信息处理 磁墨字符识别 印制规范 |
China National Standards ions |
English PDF |
| GB/T 20257.4-2007 |
Cartographic symbols for national fundamental scale maps - Part 4: Specifications for cartographic symbols 1:250 000 1:500 000 ＆ 1:1000 000 topographic maps 国家基本比例尺地图图式 第4部分：1:250 000 1:500 000 1:1000 000地形图图式 |
China National Standards ions |
English PDF |
| GB/T 20257.1-2007 |
Cartographic symbols for national fundamental scale maps - Part 1: Specifications for cartographic symbols 1:500 1:1000＆ 1:2000 topographic maps 国家基本比例尺地图图式 第1部分：1:500 1:1000 1:2000地形图图式 |
China National Standards ions |
English PDF |
| GB/T 16786-2007 |
Terminology work - Computer applications - Data categories 术语工作 计算机应用 数据类目 |
China National Standards ions |
English PDF |
| GB/T 14985-2007 |
General rules of dimensions, shape, surface, quality, testing method and inspection for expansion alloys 膨胀合金尺寸、外形、表面质量、试验方法和检验规则的一般规定 |
China National Standards ions |
English PDF |
| GB/T 21059-2007 |
Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate 塑料 液态或乳液态或分散体系聚合物/树脂 用旋转黏度计在规定剪切速率下黏度的测定 |
China National Standards ions |
English PDF |
| GB/T 12763.9-2007 |
Specifications for oceanographic survey - Part 9: Guidelines for marine ecological survey 海洋调查规范 第9部分：海洋生态调查指南 |
China National Standards ions |
English PDF |
| GB/T 12763.8-2007 |
Specifications for oceanographic survey - Part 8：marine geology and geophysics survey 海洋调查规范 第8部分: 海洋地质地球物理调查 |
China National Standards ions |
English PDF |
| GB/T 12763.7-2007 |
The specifications for oceanographic survey - Part 7: Exchange of oceanographic survey data 海洋调查规范 第7部分: 海洋调查资料交换 |
China National Standards ions |
English PDF |
| GB/T 12763.6-2007 |
Specifications for oceanographic survey - Part 6: Marine biological survey 海洋调查规范 第6部分: 海洋生物调查 |
China National Standards ions |
English PDF |
| GB/T 12763.5-2007 |
Specifications for oceanographic survey - Part 5: Survey of acoustical and optical parameters in the sea 海洋调查规范 第5部分: 海洋声、光要素调查 |
China National Standards ions |
English PDF |
| GB/T 12763.4-2007 |
Specifications for oceanographic survey - Part 4: Survey of chemical parameters in sea water 海洋调查规范 第4部分: 海水化学要素调查 |
China National Standards ions |
English PDF |
| GB/T 12763.3-2007 |
Specifications for oceanographic survey - Part 3: Marine meteorological observations 海洋调查规范 第3部分: 海洋气象观测 |
China National Standards ions |
English PDF |
| GB/T 12763.2-2007 |
Specifications for oceanographic survey - Part 2: marine hydrographic observation 海洋调查规范 第2部分: 海洋水文观测 |
China National Standards ions |
English PDF |
| GB/T 12763.1-2007 |
Specifications for oceanographic survey - Part 1: General 海洋调查规范 第1部分：总则 |
China National Standards ions |
English PDF |
| GB/T 12763.11-2007 |
Specifications for oceanographic survey - Part 11；marine engineering geological investigation 海洋调查规范 第11部分：海洋工程地质调查 |
China National Standards ions |
English PDF |
| GB/T 21066-2007 |
Electrical installations of ships and mobile and fixed offshore units - Procedures for calculating short-circuit currents in three phase a.c. 船舶和移动式及固定式近海设施的电气装置 三相交流短路电流计算方法 |
China National Standards ions |
English PDF |
| GB/T 10250-2007 |
Electrical and electronic installations in ships - Electromagnetic compatibility 船舶电气与电子设备的电磁兼容性 |
China National Standards ions |
English PDF |
| GB/T 21000.1-2007 |
Commercial refrigerated cabinets - Methods of test - Part 1: General test conditions and temperature test 商用冷藏柜 试验方法 第1部分：通用试验条件及温度试验 |
China National Standards ions |
English PDF |
| GB/T 6139-2007 |
Subland twist drills - Technical specifications 阶梯麻花钻 技术条件 |
China National Standards ions |
English PDF |
| GB/T 6125-2007 |
T-slot cutters - Technical specifications T型槽铣刀 技术条件 |
China National Standards ions |
English PDF |
| GB/T 21017-2007 |
Technical specifications for maize drying 玉米干燥技术规范 |
China National Standards ions |
English PDF |
| GB/T 21016-2007 |
Technical specifications for wheat drying 小麦干燥技术规范 |
China National Standards ions |
English PDF |
| GB/T 21015-2007 |
Technical specifications for paddy drying 稻谷干燥技术规范 |
China National Standards ions |
English PDF |
| GB/T 21012-2007 |
Precision machining centers - Specifications 精密加工中心 技术条件 |
China National Standards ions |
English PDF |
| GB/T 20957.4-2007 |
Test conditions for precision machining centres - Part 4：Accuracy and repeatability of positioning of linear and rotary axes 精密加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验 |
China National Standards ions |
English PDF |
| GB/T 18400.9-2007 |
Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change 加工中心检验条件 第9部分：刀具交换和托板交换操作时间的评定 |
China National Standards ions |
English PDF |
| GB/T 16462.4-2007 |
Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验 |
China National Standards ions |
English PDF |
| GB/T 16462.1-2007 |
Test conditions for numerically controlled turning machines and turning centers - Part 1: Geometric test for machines with a horizontal workholding spindle 数控车床和车削中心检验条件 第1部分：卧式机床几何精度检验 |
China National Standards ions |
English PDF |
| GB/T 6300-2007 |
Regulations for submission of the ship’s finished documents 提交船舶产品完工文件的规定 |
China National Standards ions |
English PDF |
| GB/T 4798.7-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 7: Portable and non-stationary use 电工电子产品应用环境条件 第7部分：携带和非固定使用 |
China National Standards ions |
English PDF |
| GB/T 4798.5-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 5: Ground vehicle installations 电工电子产品应用环境条件 第5部分：地面车辆使用 |
China National Standards ions |
English PDF |
| GB/T 4798.4-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 4: Stationary use at non-weather-protected locations 电工电子产品应用环境条件 第4部分：无气候防护场所固定使用 |
China National Standards ions |
English PDF |
| GB/T 4798.3-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 3: Stationary use at weather-protected locations 电工电子产品应用环境条件 第3部分：有气候防护场所固定使用 |
China National Standards ions |
English PDF |
| GB/T 18311.31-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources 纤维光学互连器件和无源器件 基本试验和测量程序 第3-31部分：检查和测量 纤维光学光源耦合功率比测量 |
China National Standards ions |
English PDF |
| GB/T 18311.30-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors 纤维光学互连器件和无源器件 基本试验和测量程序 第3-30部分：检查和测量 单套管多芯光纤连接器抛光角度和光纤位置 |
China National Standards ions |
English PDF |
| GB/T 18311.28-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss 纤维光学互连器件和无源器件 基本试验和测量程序 第3-28部分: 检查和测量 瞬间损耗 |
China National Standards ions |
English PDF |
| GB/T 18311.26-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes 纤维光学互连器件和无源器件 基本试验和测量程序 第3-26部分：检查和测量 光纤和插针轴线间的角偏差的测量 |
China National Standards ions |
English PDF |
| GB/T 18311.20-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices 纤维光学互连器件和无源器件 基本试验和测量程序 第3-20部分：检查和测量 纤维光学分路器件的方向性 |
China National Standards ions |
English PDF |
| GB/T 18311.16-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules 纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分：检查和测量 球面抛光套管端面半径 |
China National Standards ions |
English PDF |
| GB/T 15157.14-2007 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范 |
China National Standards ions |
English PDF |
| GB 15577-2007 |
Safety regulations for dust explosion prevention and protection 粉尘防爆安全规程 |
China National Standards ions |
English PDF |
| GB/T 6138.2-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分：莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards ions |
English PDF |
| GB/T 6138.1-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分：直柄阶梯麻花钻的型式和尺寸 |
China National Standards ions |
English PDF |
| GB/T 6129-2007 |
Technical specifications for angle cutters 角度铣刀 技术条件 |
China National Standards ions |
English PDF |
| GB/T 5343.2-2007 |
Turning tool holders and cartridges for indexable inserts - Part 2: Dimensions and technical specifications of turning tool holders for indexable inserts 可转位车刀及刀夹 第2部分：可转位车刀型式尺寸和技术条件 |
China National Standards ions |
English PDF |
| GB/T 4127.9-2007 |
Bonded abrasive products - Dimensions - Part 9: Grinding wheels for high-pressure grinding 固结磨具 尺寸 第9部分：重负荷磨削砂轮 |
China National Standards ions |
English PDF |
| GB/T 4127.8-2007 |
Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging 固结磨具 尺寸 第8部分：去毛刺、荒磨和粗磨用砂轮 |
China National Standards ions |
English PDF |
| GB/T 4127.3-2007 |
Bonded abrasive products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding 固结磨具 尺寸 第3部分：内圆磨砂轮 |
China National Standards ions |
English PDF |
| GB/T 4127.2-2007 |
Bonded abrasive products - Dimensions - Part 2: Grinding wheels for centreless external cylindrical grinding 固结磨具 尺寸 第2部分：无心外圆磨砂轮 |
China National Standards ions |
English PDF |
| GB/T 4127.16-2007 |
Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools 固结磨具 尺寸 第16部分：手持式电动工具用切割砂轮 |
China National Standards ions |
English PDF |
| GB/T 4127.15-2007 |
Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines 固结磨具 尺寸 第15部分：固定式或移动式切割机用切割砂轮 |
China National Standards ions |
English PDF |
| GB/T 4127.1-2007 |
Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centres 固结磨具 尺寸 第1部分：外圆磨砂轮（工件装夹在顶尖间） |
China National Standards ions |
English PDF |
| GB/T 20958.2-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 2: Milling machines with vertical spindle 数控床身铣床检验条件 精度检验 第2部分: 立式铣床 |
China National Standards ions |
English PDF |
| GB/T 20958.1-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 1: Milling machines with horizontal spindle 数控床身铣床检验条件 精度检验 第1部分: 卧式铣床 |
China National Standards ions |
English PDF |
| GB/T 20957.7-2007 |
Test conditions for precision machining centres - Part 7: Accuracy of a finished test piece 精密加工中心检验条件 第7部分：精加工试件精度检验 |
China National Standards ions |
English PDF |
| GB/T 20957.5-2007 |
Test conditions of precision machining centres - Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets 精密加工中心检验条件 第5部分：工件夹持托板的定位精度和重复定位精度检验 |
China National Standards ions |
English PDF |
| GB/T 20957.2-2007 |
Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) 精密加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床 几何精度检验(垂直Z轴) |
China National Standards ions |
English PDF |
| GB/T 20957.1-2007 |
Test conditions for precision machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z axis) 精密加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards ions |
English PDF |
| GB/T 20946-2007 |
short link chain for lifting purposes - General conditions of acceptance 起重用短环链 验收总则 |
China National Standards ions |
English PDF |
| GB/T 1124.2-2007 |
Convex and concave milling cutters - Part 2：Technical specifications 凸凹半圆铣刀 第2部分: 技术条件 |
China National Standards ions |
English PDF |
| GB/T 1124.1-2007 |
Convex and concave milling cutters - Part1：The types and dimensions 凸凹半圆铣刀 第1部分：型式和尺寸 |
China National Standards ions |
English PDF |
| GB 20952-2007 |
Emission standard of air pollutant for gasoline filling stations 加油站大气污染物排放标准 |
China National Standards ions |
English PDF |
| GB/Z 20996.3-2007 |
Performance of high-voltage direct current(HVDC) systems - Part 3: Dynamic conditions 高压直流系统的性能 第3部分：动态 |
China National Standards ions |
English PDF |
| GB/Z 20996.1-2007 |
Performance of high-voltage direct current(HVDC) systems - Part 1: Steady-state conditions 高压直流系统的性能 第1部分：稳态 |
China National Standards ions |
English PDF |
| GB/T 9652.1-2007 |
Specifications of control systems for hydraulic turbines 水轮机控制系统技术条件 |
China National Standards ions |
English PDF |
| GB/T 20989-2007 |
Determination of power losses in high-voltage direct current (HVDC) converter stations 高压直流换流站损耗的确定 |
China National Standards ions |
English PDF |
| GB/T 18802.321-2007 |
Components for low-voltage surge protective devices - Part 321: Specifications for avalanche breakdown diode(ABD) 低压电涌保护器元件 第321部分：雪崩击穿二极管（ABD）规范 |
China National Standards ions |
English PDF |
| GB/T 20988-2007 |
Information security technology - Disaster recovery specifications for information system 信息安全技术 信息系统灾难恢复规范 |
China National Standards ions |
English PDF |
| GB/T 13606-2007 |
Instrument for geotechnical engineering - General specifications of vibrating wire sensor 土工试验仪器 岩土工程仪器 振弦式传感器通用技术条件 |
China National Standards ions |
English PDF |
| GB/T 17564.5-2007 |
Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema 电气元器件的标准数据元素类型和相关分类模式 第5部分: EXPRESS 字典模式扩展 |
China National Standards ions |
English PDF |
| GB 17625.2-2007 |
Eiectromagnetic compatibility limits(EMC) - Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems,for equipment with rated current ≤16A per phase and not subject to conditional connection 电磁兼容 限值 对每相额定电流≤16A且无条件接入的设备在公用低压供电系统中产生的电压变化、电压波动和闪烁的限制 |
China National Standards ions |
English PDF |
| GB/T 3620.2-2007 |
Titanium and titanium alloys-permissible variations of chemical composition for wrought product analysis 钛及钛合金加工产品化学成分允许偏差 |
China National Standards ions |
English PDF |
| Find out:5507Items | To Page of: First -Previous-Next -Last | [38] [39] [40] [41] [42] [43] [44] |
+86-755-25831330
