China EC GB Standards English PDF List

GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.

China "EC" GB Standards English PDF List:

Standard Code	Standard Title	Standard Class	Order
GB/T 14805.2-2007	ElECtronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 2: Syntax rules specific to batch EDI 行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第2部分: 批式电子数据交换专用的语法规则	China National Standards EC	English PDF
GB/T 14805.1-2007	ElECtronic data interchange for administration,commerce andtransport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 1: Syntax rules common to all parts 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号: 4，语法发布号:1) 第1部分：公用的语法规则	China National Standards EC	English PDF
GB/T 11313.4-2007	Radio-frequency connECters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型)	China National Standards EC	English PDF
GB/T 11313.2-2007	Radio-frequency connECtors - Part 2: Sectional specification - Radio frequency coaxial connectors for type 9.52 射频连接器第2部分: 9.52型射频同轴连接器分规范	China National Standards EC	English PDF
GB/T 20969.3-2007	SpECial environmental condition - Machinery for plateau - Part 3: The specification of select type and acceptance check for construction machinery on plateau 特殊环境条件高原机械第3部分：高原型工程机械选型、验收规范	China National Standards EC	English PDF
GB/T 20969.2-2007	SpECial environmental condition - Machinery for plateau - Part 2: Requirements for construction machinery on plateau 特殊环境条件高原机械第2部分：高原对工程机械的要求	China National Standards EC	English PDF
GB/T 20969.1-2007	SpECial environmental condition - Machinery for plateau - Part 1: Requirements for internal combustion engines on plateau 特殊环境条件高原机械第1部分：高原对内燃动力机械的要求	China National Standards EC	English PDF
GB/T 20991-2007	Personal protECtive equipment - Test methods for footwear 个体防护装备鞋的测试方法	China National Standards EC	English PDF
GB 15577-2007	Safety regulations for dust explosion prevention and protECtion 粉尘防爆安全规程	China National Standards EC	English PDF
GB 14773-2007	Safety code for painting - Safety spECification for electrostatic spray guns and associated apparatus 涂装作业安全规程静电喷枪及其辅助装置安全技术条件	China National Standards EC	English PDF
GB/T 6809.4-2007	RECiprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems 往复式内燃机零部件和系统术语第4部分：增压及进排气管系统	China National Standards EC	English PDF
GB/T 6129-2007	TEChnical specifications for angle cutters 角度铣刀技术条件	China National Standards EC	English PDF
GB/T 5343.2-2007	Turning tool holders and cartridges for indexable inserts - Part 2: Dimensions and tEChnical specifications of turning tool holders for indexable inserts 可转位车刀及刀夹第2部分：可转位车刀型式尺寸和技术条件	China National Standards EC	English PDF
GB/T 20972.1-2007	Petroleum and natural gas industries - Material for use in H2S - containing environments in oil and gas production - part 1: General principles for selECtion of cracking-resistant materials 石油天然气工业油气开采中用于含硫化氢环境的材料第1部分：选择抗裂纹材料的一般原则	China National Standards EC	English PDF
GB/T 20957.7-2007	Test conditions for prECision machining centres - Part 7: Accuracy of a finished test piece 精密加工中心检验条件第7部分：精加工试件精度检验	China National Standards EC	English PDF
GB/T 20957.5-2007	Test conditions of prECision machining centres - Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets 精密加工中心检验条件第5部分：工件夹持托板的定位精度和重复定位精度检验	China National Standards EC	English PDF
GB/T 20957.1-2007	Test conditions for prECision machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z axis) 精密加工中心检验条件第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴)	China National Standards EC	English PDF
GB/T 1124.2-2007	Convex and concave milling cutters - Part 2：TEChnical specifications 凸凹半圆铣刀第2部分: 技术条件	China National Standards EC	English PDF
GB/T 10826.1-2007	Fuel injECtion equipment - Vocabulary - Part 1：Fuel injection pump 燃油喷射装置词汇第1部分：喷油泵	China National Standards EC	English PDF
GB/Z 20996.3-2007	Performance of high-voltage dirECt current(HVDC) systems - Part 3: Dynamic conditions 高压直流系统的性能第3部分：动态	China National Standards EC	English PDF
GB/Z 20996.2-2007	Performance of high-voltage dirECt current（HVDC）systems - Part 2: Faults and switching 高压直流系统的性能第2部分：故障和操作	China National Standards EC	English PDF
GB/Z 20996.1-2007	Performance of high-voltage dirECt current(HVDC) systems - Part 1: Steady-state conditions 高压直流系统的性能第1部分：稳态	China National Standards EC	English PDF
GB/T 9652.1-2007	SpECifications of control systems for hydraulic turbines 水轮机控制系统技术条件	China National Standards EC	English PDF
GB/T 20995-2007	Power elECtronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators 输配电系统的电力电子技术静止无功补偿装置用晶闸管阀的试验	China National Standards EC	English PDF
GB/T 20990.1-2007	Thyristor valves for high voltage dirECt current (HVDC) power transmission - Part 1: Electrical testing 高压直流输电晶闸管阀第1部分：电气试验	China National Standards EC	English PDF
GB/T 20989-2007	Determination of power losses in high-voltage dirECt current (HVDC) converter stations 高压直流换流站损耗的确定	China National Standards EC	English PDF
GB/T 18802.341-2007	Components for low-voltage surge protECtive devices - Part 341: Secification for thyristor surge suppressors(TSS) 低压电涌保护器元件第341部分：电涌抑制晶闸管（TSS）规范	China National Standards EC	English PDF
GB/T 18802.331-2007	Components for low-voltage surge protECtive devices - Part 331: Secification for metal oxide varistors(MOV) 低压电涌保护器元件第331部分：金属氧化物压敏电阻（MOV）规范	China National Standards EC	English PDF
GB/T 18802.321-2007	Components for low-voltage surge protECtive devices - Part 321: Specifications for avalanche breakdown diode(ABD) 低压电涌保护器元件第321部分：雪崩击穿二极管（ABD）规范	China National Standards EC	English PDF
GB/T 13498-2007	Terminology for high - voltage dirECt current（HVDC) transmission 高压直流输电术语	China National Standards EC	English PDF
GB/T 10685-2007	Wool-Determination of fiber diameter - ProjECtion microscope method 羊毛纤维直径试验方法投影显微镜法	China National Standards EC	English PDF
GB/T 20979-2007	Information sECurity technology - Technical rquirements for iris identification system 信息安全技术虹膜识别系统技术要求	China National Standards EC	English PDF
GB 21027-2007	Request in common use of sECurity for student’s articles 学生用品的安全通用要求	China National Standards EC	English PDF
GB/Z 20986-2007	Information sECurity technology - Guidelines for the category and classification of information security incidents 信息安全技术信息安全事件分类分级指南	China National Standards EC	English PDF
GB/Z 20985-2007	Information tEChnology - Security techniques -Information security incident management guide 信息技术安全技术信息安全事件管理指南	China National Standards EC	English PDF
GB/T 20988-2007	Information sECurity technology - Disaster recovery specifications for information system 信息安全技术信息系统灾难恢复规范	China National Standards EC	English PDF
GB/T 20987-2007	Information sECurity technology - Evaluation Criteria for online stock trading information systems security assurance 信息安全技术网上证券交易系统信息安全保障评估准则	China National Standards EC	English PDF
GB/T 20984-2007	Information sECurity technology - Risk assessment specification for information security 信息安全技术信息安全风险评估规范	China National Standards EC	English PDF
GB/T 20983-2007	Information sECurity technology - Evaluation criteria for online banking information systems security assurance 信息安全技术网上银行系统信息安全保障评估准则	China National Standards EC	English PDF
GB/T 18018-2007	Information sECurity technology - Technical requirements for router security 信息安全技术路由器安全技术要求	China National Standards EC	English PDF
GB/T 21029-2007	The series and type spECtrum of geotechnical engineering instrument 岩土工程仪器系列型谱	China National Standards EC	English PDF
GB/T 15406-2007	Primary parameter and general spECification for geotechnical engineering instrument 岩土工程仪器基本参数及通用技术条件	China National Standards EC	English PDF
GB/T 13606-2007	Instrument for geotEChnical engineering - General specifications of vibrating wire sensor 土工试验仪器岩土工程仪器振弦式传感器通用技术条件	China National Standards EC	English PDF
GB/T 12746-2007	GeotEChnical engineering instrument for test penetration test apparatus 土工试验仪器　贯入仪	China National Standards EC	English PDF
GB/T 12745-2007	GeotEChnical engineering instrument for test cone static or dynamic penetrometer 土工试验仪器触探仪	China National Standards EC	English PDF
GB 4584-2007	SpECification of active opto-electronic protective devices for presses 压力机用光电保护装置技术条件	China National Standards EC	English PDF
GB 4793.1-2007	Safety requirements for elECtrical equipment for measurement，control，and laboratory use - Part 1: General requirements 测量、控制和实验室用电气设备的安全要求第1部分：通用要求	China National Standards EC	English PDF
GB/T 20977-2007	General tEChnical requirement for the pastry 糕点通则	China National Standards EC	English PDF
GB/T 20935.1-2007	Method of elECtromagnetic acoustic inspection for metal materials - Part 1: Standard guide for electromagnetic acoustic transducers (EMATs) 金属材料电磁超声检验方法第1部分：电磁超声换能器指南	China National Standards EC	English PDF
GB/T 15970.9-2007	Corrosion of metal and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked spECimens for tests under rising load or rising displacement 金属和合金的腐蚀应力腐蚀试验第9部分：渐增式载荷或渐增式位移下的预裂纹试样的制备和应用	China National Standards EC	English PDF
GB/T 15970.6-2007	Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked spECimens for tests under constant load or constant displacement 金属和合金的腐蚀应力腐蚀试验第6部分：恒载荷或恒位移下的预裂纹试样的制备和应用	China National Standards EC	English PDF
GB/T 20688.1-2007	Rubber bearing - Part 1: Seismic-protECtion isolators test methods 橡胶支座第1部分: 隔震橡胶支座试验方法	China National Standards EC	English PDF
GB/T 1693-2007	Rubber,vulcanized - Determination of dielECtric constant and dielectric loss tangent 硫化橡胶介电常数和介质损耗角正切值的测定方法	China National Standards EC	English PDF
GB 3836.17-2007	ElECtrical apparatus for explosive gas atmosphere - Part 13: Construction and use of rooms or buildings protected by pressurization 爆炸性气体环境用电气设备第17部分：正压房间或建筑物的结构和使用	China National Standards EC	English PDF
GB 20936.1-2007	ElECtrical apparatus for the detection and measurement of flammable gases - Part 1: General requirement and test methods 可燃性气体探测用电气设备　第1部分：通用要求和试验方法	China National Standards EC	English PDF
GB/T 7597-2007	Method of sampling for transformer and turbine oils in elECtric power industry 电力用油(变压器油、汽轮机油)取样方法	China National Standards EC	English PDF
GB/T 20939-2007	Structuring principles for tEChnical products and technical product documentation - Letter codes - Main classes and subclasses of objects according to their purpose and task 技术产品及技术产品文件结构原则字母代码按项目用途和任务划分的主类和子类	China National Standards EC	English PDF
GB/T 17564.5-2007	Standard data element types with associated classification scheme for elECtric components - Part 5: Extensions to the EXPRESS dictionary schema 电气元器件的标准数据元素类型和相关分类模式第5部分: EXPRESS 字典模式扩展	China National Standards EC	English PDF
GB 17625.2-2007	EiECtromagnetic compatibility limits(EMC) - Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems,for equipment with rated current ≤16A per phase and not subject to conditional connection 电磁兼容限值对每相额定电流≤16A且无条件接入的设备在公用低压供电系统中产生的电压变化、电压波动和闪烁的限制	China National Standards EC	English PDF
GB/T 20913-2007	The protECtion of the occupants in the event of an off-set frontal collision for passenger car 乘用车正面偏置碰撞的乘员保护	China National Standards EC	English PDF
GB/T 7452-2007	MEChanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships 机械振动客船和商船适居性振动测量、报告和评价准则	China National Standards EC	English PDF
GB/T 5246-2007	ElECtrolytic copper powder 电解铜粉	China National Standards EC	English PDF
GB/T 3615-2007	Aluminium foil for elECtrolytic capacitor 电解电容器用铝箔	China National Standards EC	English PDF
GB/T 20975.2-2007	Chemical analysis methods of aluminium and aluminium alloys - Part 2：Determination of arsenic content molybdenum blue spECtrophotometric method 铝及铝合金化学分析方法第2部分：砷含量的测定钼蓝分光光度法	China National Standards EC	English PDF
GB/T 20975.1-2007	Chemical analysis methods of aluminium and aluminium alloys - Part 1：Determination of mercury content - Cold atomic absorption spECtrometric method 铝及铝合金化学分析方法第1部分：汞含量的测定冷原子吸收光谱法	China National Standards EC	English PDF
GB/T 20931.9-2007	Methods for chemical analysis of lithium - Determination of nitrogen content - Mercuric potassium iodide spECtrophotometric method 锂化学分析方法氮量的测定碘化汞钾分光光度法	China National Standards EC	English PDF
GB/T 20931.8-2007	Methods for chemical analysis of lithium - Determination of chlorine content - Thiocyanate spECtrophotometric method 锂化学分析方法氯量的测定硫氰酸盐分光光度法	China National Standards EC	English PDF
GB/T 20931.7-2007	Methods for chemical analysis of lithium - Determination of nickel content - α-Furil dioxime spECtrophotometric method 锂化学分析方法镍量的测定 α-联呋喃甲酰二肟萃取光度法	China National Standards EC	English PDF
GB/T 20931.6-2007	Methods for chemical analysis of lithium - Determination of aluminum content - Chromazurol S-cetylpyridine broide spECtrophotometric method 锂化学分析方法铝量的测定铬天青S-溴化十六烷基吡啶分光光度法	China National Standards EC	English PDF
GB/T 20931.5-2007	Methods for chemical analysis of lithium - Determination of silicon content - Molybdenum blue spECtrophotometric method 锂化学分析方法硅量的测定硅钼蓝分光光度法	China National Standards EC	English PDF
GB/T 20931.4-2007	Methods for chemical analysis of lithium - Determination of iron content - Orthopenanthroline spECtrophotometric method 锂化学分析方法铁量的测定邻二氮杂菲分光光度法	China National Standards EC	English PDF
GB/T 20931.3-2007	Methods for chemical analysis of lithium - Determination of calcium content - Flame atomic absorption spECtrometric method 锂化学分析方法钙量的测定火焰原子吸收光谱法	China National Standards EC	English PDF
GB/T 20931.2-2007	Methods for chemical analysis of lithium - Determination of sodium content - Flame atomic absorption spECtrometric method 锂化学分析方法钠量的测定火焰原子吸收光谱法	China National Standards EC	English PDF
GB/T 20931.1-2007	Methods for chemical analysis of lithium - Determination of potassium content - Flame atomic absorption spECtrometric method 锂化学分析方法钾量的测定火焰原子吸收光谱法	China National Standards EC	English PDF
GB/T 20931.11-2007	Methods for chemical analysis of lithium - Determination of magnesium content - Flame atomic absorption spECtrometric method 锂化学分析方法镁量的测定火焰原子吸收光谱法	China National Standards EC	English PDF
GB/T 20931.10-2007	Methods for chemical analysis of lithium - Determination of copper content - Flame atomic absorption spECtrometric method 锂化学分析方法铜量的测定火焰原子吸收光谱法	China National Standards EC	English PDF
GB/T 20929-2007	The methods of testing acidithiobacillus ferrooxidans and its activity by microarray tEChnology 嗜酸氧化亚铁硫杆菌及其活性的基因芯片检测方法	China National Standards EC	English PDF
GB/T 13441.1-2007	MEChanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements 机械振动与冲击人体暴露于全身振动的评价第1部分: 一般要求	China National Standards EC	English PDF
GB/T 20920-2007	ElECtronic level meter 电子水平仪	China National Standards EC	English PDF
GB/T 20919-2007	External micrometer with elECtronic digital display 电子数显外径千分尺	China National Standards EC	English PDF
GB/T 18761-2007	Dial indicator with elECtronic digital display 电子数显指示表	China National Standards EC	English PDF
GB/T 20916-2007	SpECification for the Chinese office file format 中文办公软件文档格式规范	China National Standards EC	English PDF
GB/T 17626.16-2007	ElECtromagnetic compatibility - Testing and measurement techniques - Test for immunity to conducted，common mode disturbances in the frequency range 0Hz to 150kHz 电磁兼容试验和测量技术 0Hz～150kHz共模传导骚扰抗扰度试验	China National Standards EC	English PDF
GB/T 8566-2007	Information tEChnology - Software life cycle processes 信息技术软件生存周期过程	China National Standards EC	English PDF
GB/T 20918-2007	Information tEChnology - Software life cycle processes - Risk management 信息技术软件生存周期过程风险管理	China National Standards EC	English PDF
GB/T 19851.21-2007	Sports equipment and playground for middle school ＆ primary school - Part 21：ShuttlECock 中小学体育器材和场地第21部分：毽球、花毽	China National Standards EC	English PDF
GB/T 20908-2007	General spECification for the contact line measuring car of urban rail transit 城市轨道交通接触网检测车通用技术条件	China National Standards EC	English PDF
GB/T 20907-2007	TEChnical requirements for automatic fare collection system of urban rail transportation 城市轨道交通自动售检票系统技术条件	China National Standards EC	English PDF
GB 5085.7-2007	Identification standards for hazardous wastes - General spECifications 危险废物鉴别标准通则	China National Standards EC	English PDF
GB/T 12235-2007	Steel globe valves and lift chECk valve for petroleum, petrochemical and allied industries 石油、石化及相关工业用钢制截止阀和升降式止回阀	China National Standards EC	English PDF
GB/T 20902-2007	SpECification for equipping and managing of the measuring instrument of energy in the nonferrous metals smelters 有色金属冶炼企业能源计量器具配备和管理要求	China National Standards EC	English PDF
GB/T 20901-2007	SpECification for equipping and managing of measuring instrument of energy in petroleum and petrochemical industry 石油石化行业能源计量器具配备和管理要求	China National Standards EC	English PDF
GB 50414-2007	Code of design for fire protECtion and prevention for iron & steel metallurgy enterprises 钢铁冶金企业设计防火规范	China National Standards EC	English PDF
GB 50397-2007	Code for acceptance of elECtrical construction installation in metallurgy 冶金电气设备工程安装验收规范	China National Standards EC	English PDF
GB 20922-2007	The reuse of urban rECycling water - Quality of farmland irrigation water 城市污水再生利用农田灌溉用水水质	China National Standards EC	English PDF
GB/T 20915.2-2007	Stamping dies - Elastomer pressure springs - Part 2: SpECification of accessories 冲模弹性体压缩弹簧第2部分：附件规格	China National Standards EC	English PDF
GB/T 20915.1-2007	Stamping dies - Elastomer pressure springs - Part 1: General spECification 冲模弹性体压缩弹簧第1部分：通用规格	China National Standards EC	English PDF
GB/T 20914.2-2007	Stamping dies - Gas springs - Part 2: SpECification of accessories 冲模氮气弹簧第2部分：附件规格	China National Standards EC	English PDF
GB/T 20914.1-2007	Stamping dies - Gas springs - Part 1: General spECification 冲模氮气弹簧第1部分：通用规格	China National Standards EC	English PDF
GB/T 14663-2007	SpECification of plastic packaging moulds 塑封模技术条件	China National Standards EC	English PDF

Find out:21629Items | To Page of: First -Previous-Next -Last | [170] [171] [172] [173] [174] [175] [176]

- Since 2001 -
Focus on China Standards & Compliance Services

www.rjs.cn
China Licenses

www.transcustoms.com
China HS code & Tariff

www.gbstandards.org
China National Standards