China National Standards

China stead GB Standards List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "stead" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
  • GB/T 14513.3-2020
  • Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 3:Method for calculating steady-state flow-rate characteristics of systems stead
    China GB-National Standards
  • GB/T 37015.1-2018
  • Performance of high-voltage direct current power transmission system using voltage sourced converters (VSC-HVDC)—Part1: steady-state stead
    China National Standards
  • GB/T 11048-2018
  • Textiles-Physiological effects-Measurement of thermal and water-vapour resistance under steady-state conditions(sweating guarded-hotplate test) stead
    China National Standards
  • GB/T 14513.1-2017
  • Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow stead
    China National Standards
  • GB/T 33977-2017
  • Methods to quantify the steady state, power-frequency electrimagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations stead
    China National Standards
  • SY/T 6339-1998
  • Unsteady-state oil-gas relative permeability measurement stead
    China Oil & Gas Industry Standards
  • SY/T 5802-1993
  • (Dense rock permeability assay (steady-state method)) stead
    China Oil & Gas Industry Standards
  • SY 5345-1989
  • (Determination of relative permeability of non-steady-state method) stead
    China Oil & Gas Industry Standards
  • QC/T 1071-2017
  • (Test method for steady - state flow characteristics of airway in cylinder head of automobile engine) stead
    China Automobile & Vehicle industry Standards
  • FZ/T 90059-2009
  • Textile motor test method of damp heat in steady state stead
    China Textile & Garment industry Standards
  • FZ/T 01036-1993
  • (Textile materials with the Turks about the whole value (Tex) made a comprehensive conversion table instead of the traditional yarn) stead
    China Textile & Garment industry Standards
  • FZ/T 01029-1993
  • (Textiles measured under steady-state conditions of thermal and moisture resistance) stead
    China Textile & Garment industry Standards
  • NB/T 20102-2012
  • steady-state neutron reactors response rate to determine the distribution and reactivity stead
    China Energy industry Standards
  • GY/T 190-2003
  • For exchange with the minimum content of the movie and its magnetic sound track material container label (instead of GB 9046-88) stead
    China Radio, Film & TV Industry Standards
  • GY/T 188-2003
  • Film screening method for determination of the main characteristics of the curtain (instead of GB 5879-86) stead
    China Radio, Film & TV Industry Standards
  • HJ/T 291-2006
  • Equipment specifications and quality control requirements for Gasoline vehicles exhuast emission test in steady-state loaded mode stead
    China Environmental Protection Industry Standards
  • HG/T 2482-1993
  • (steady flow valves for the gas phase) stead
    China Chemical Industry Standards
  • CJ/T 303-2008
  • steady pressure compensation type non-negative pressure water supply devices stead
    China Urban Construction industry Standards
  • CJ/T 303-2008
  • steady pressure compensation type non-negative pressure water supply devices stead
    China Urban Construction industry Standards
  • JT/T 884-2014
  • Commercial vehicle anti-rolling stability test method-steady circle test stead
    China Highway & Transportation Standards
  • JJF 1227-2009
  • Calibration Spectification for Exhaust Pollutants from Gasoline Vehicle under steady-state Loaded Mode Measurement System stead
    China Metrological Standards
  • GB/T 2423.3-2016
  • Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state stead
    China National Standards
  • GB/T 33393-2016
  • Footwear—Test methods for whole shoes—Measurement of thermal and water-vapour resistance under steady-state conditions stead
    China National Standards
  • TB 1342-1985
  • (Automatic steady flow rectifier series and the main technical conditions) stead
    China Railway & Train Standards
  • TB/T 2880-1998
  • (Determination of Hydraulic displacement pumps, motors and steady-state performance of the overall transmission) stead
    China Railway & Train Standards
  • TB/T 2075.21-2002
  • Fittings for overhead contact system of electrification railway-Part 21: steady tube stead
    China Railway & Train Standards
  • TB/T 2075.20-2002
  • Fittings for overhead contact system of electrification railway-Part 20: steady arm for curve line t-type stead
    China Railway & Train Standards
  • TB/T 2075.19-2002
  • Fittings for overhead contact system of electrification railway-Part 19: steady arm for curve line stead
    China Railway & Train Standards
  • TB/T 2075.18-2002
  • Fittings for overhead contact system of electrification railway-Part 18: steady arm T-type stead
    China Railway & Train Standards
  • TB/T 2075.17-2002
  • Fittings for overhead contact system of electrification railway-Part 17: steadyarm stead
    China Railway & Train Standards
  • TB/T 2075.13-2002
  • Fittings for overhead contact system of electrification railway-Part 13: steady clamp stead
    China Railway & Train Standards
  • TB/T 2075.4-2010
  • Fittings for overhead contact system in electrification railway. Part 4: Non-limited steady device stead
    China Railway & Train Standards
  • TB/T 2075.3-2010
  • Fittings for overhead contact system in electrification railway. Part 3: Limited steady device stead
    China Railway & Train Standards
  • SJ/Z 863-1980
  • Preferred spectrum of values for vibration, shock and steady-state acceleration testing equipment stead
    China Electronics Standards
  • SJ 2151-1982
  • (Silicon transistor current steady flow test method temperature coefficient) stead
    China Electronics Standards
  • SJ 2150-1982
  • (Silicon transistor breakdown voltage steady flow test method) stead
    China Electronics Standards
  • SJ 2149-1982
  • (steady flow silicon transistor threshold voltage of the test method) stead
    China Electronics Standards
  • SJ 2147-1982
  • (Silicon transistor stable steady flow of current test methods) stead
    China Electronics Standards
  • SJ 2146-1982
  • (Silicon Transistor steady flow test method General) stead
    China Electronics Standards
  • SJ/Z 9001.5-1987
  • Basic environmental testing procedures--Part 2: Tests--Test Ca: Damp heat, steady state stead
    China Electronics Standards
  • SJ/Z 9001.27-1987
  • Basic environmental testing procedures--Part 2: Tests--Test Ga: Acceleration, steady state stead
    China Electronics Standards
  • SJ/T 10174-1991
  • steady sunlight simulator for air-mass 1. 5 stead
    China Electronics Standards
  • SN/T 2498.4-2012
  • Basic environmental testing for the import and export fireworks and firecracker articles. Damp heat,steady state stead
    China Import Export Inspection Standards
  • GB/Z 20996.1-2007
  • Performance of high-voltage direct current(HVDC) systems - Part 1: steady-state conditions stead
    China National Standards
  • GB/T 8190.4-2010
  • Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: steady-state test cycles for different engine applications stead
    China National Standards
  • GB/T 8190.3-2003
  • Reciprocating internal combustion engines--Exhaust emission measurement--Part 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions stead
    China National Standards
  • GB/T 4937.4-2012
  • Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST) stead
    China National Standards
  • GB/T 32065.6-2015
  • Environmental test methods for oceanographic instruments—Part 6:Damp heat, steady state stead
    China National Standards
  • GB/T 28782.2-2012
  • Hydraulic fluid power - Measurement techniques - Part 2: Measurement of average steady-state pressure in a closed conduit stead
    China National Standards
  • GB/T 28279.2-2012
  • Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for calculation of oil-lubricated plain journal bearings with drainage grooves stead
    China National Standards
  • GB/T 28279.1-2012
  • Plain bearing - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves stead
    China National Standards
  • GB/T 28278.2-2012
  • Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for calculation of oil-lubricated plain journal bearings without drainage grooves stead
    China National Standards
  • GB/T 28278.1-2012
  • Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves stead
    China National Standards
  • GB/T 24680-2009
  • Agricultural sprayers - Boom steadiness - Test methods stead
    China National Standards
  • GB/T 2423.50-2012
  • Environmental testing - Part 2: Test methods - Test Cy: Damp heat,steady state,accelerated test primarily intended for components stead
    China National Standards
  • GB/T 2423.40-2013
  • Environmental testing―Part 2: Test methods―Test Cx: Damp heat, steady state (unsaturated pressurized vapour) stead
    China National Standards
  • GB/T 2423.3-2006
  • Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat, steady state stead
    China National Standards
  • GB/T 2423.15-2008
  • Environmental testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: Acceleration, steady stead
    China National Standards
  • GB/T 23892.3-2009
  • Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings stead
    China National Standards
  • GB/T 23892.2-2009
  • Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings stead
    China National Standards
  • GB/T 23892.1-2009
  • Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings stead
    China National Standards
  • GB/T 23891.3-2009
  • Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 3: Guide values for the calculation of thrust pad bearings stead
    China National Standards
  • GB/T 23891.2-2009
  • Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings stead
    China National Standards
  • GB/T 23891.1-2009
  • Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings stead
    China National Standards
  • GB/T 22476-2008
  • Calculation and determination of steady-state U values(thermal transmittance) of multiple glazing stead
    China National Standards
  • GB/T 21466.3-2008
  • Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters stead
    China National Standards
  • GB/T 21466.2-2008
  • Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure stead
    China National Standards
  • GB/T 21466.1-2008
  • Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings -- Part 1: Calculation procedure stead
    China National Standards
  • GB/T 19280-2003
  • Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) stead
    China National Standards
  • GB/T 18310.19-2002
  • Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-19:Tests--Damp heat(steady state) stead
    China National Standards
  • GB/T 17491-2011
  • Hydraulic fluid power - Positive-displacement pumps,motor and integral transmissions - Methods of testing and presenting basic steady state performance stead
    China National Standards
  • GB/T 17370-2015
  • Determination of stead-state thermal transmissivity of a moist building material stead
    China National Standards
  • GB/T 17370-1998
  • Determination of stead-state thermal transmissivity of a moist building material stead
    China National Standards
  • GB/T 15972.50-2008
  • Specifications for optical fibre test methods - Part 50: Measurement methods and test procedures for environmental characteristics - Damp heat(steady state) stead
    China National Standards
  • GB/T 15647-1995
  • Compliance test procedures for steady-state availab-ility stead
    China National Standards
  • GB/T 13475-2008
  • Thermal insulation - Determination of steady-state thermal transmission Properties - Calibrated and guard hot box stead
    China National Standards
  • GB/T 12085.16-2010
  • Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration and dry heat or cold stead
    China National Standards
  • GB/T 11833-2014
  • Determination of steady-state thermal transmission properties of thermal insulation―Spherical method stead
    China National Standards
  • GB/T 11048-2008
  • Textiles - Physiological effects - Measurement of thermal and wate-vapour resistance under steady-state conditions stead
    China National Standards
  • GB/T 10296-2008
  • Thermal insulation - Determination of steady-state thermal transmission properties-pipe insulation apparatus stead
    China National Standards
  • GB/T 10295-2008
  • Thermal insulation-Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus stead
    China National Standards
  • GB/T 10294-2008
  • Thermal insulation - Determination of steady-state thermal resistance and related properties - Guarded hot plate apparatus stead
    China National Standards
  • GB 9486-1988
  • Diesel engine--Exhaust smoke measurement method at steady state stead
    China National Standards

    Find out:83Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        info@transcustoms.com 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2021 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.rjs.cn

    China Licenses

    www.transcustoms.com

    China HS code & Tariff

    www.gbstandards.org

    China National Standards