China National Standards		 HOME  CONTACT US to PC vesion

'Thermo'
China GB Standards List

 GB-1588-2024  
Medical glass Thermometers
医用玻璃体温计
 GB/T 7911-2024  
Thermosetting resin impregnated paper high pressure decorative laminate (HPL)
热固性树脂浸渍纸高压装饰层积板（HPL）
 GB/T 30491.2-2024  
Natural gas - Calculation of Thermodynamic properties - Part 2: Single-phase (gas, liquid and dense phase) fluid properties with extended application range
天然气-热力学性质计算-第2部分：扩展应用范围的单相（气相、液相和稠密相）流体性质
 GB/T 3780.30-2023  
Carbon black Part 30: Determination of high temperature volatiles Thermogravimetric method
炭黑 第30部分：高温挥发物的测定 热重法
 GB/T 43117-2023  
Glass fiber reinforced Thermoset plastic (GRP) pipes - Determination of ring creep properties in wet or dry conditions
玻璃纤维增强热固性塑料（GRP）管 湿态或干态条件下环蠕变性能的测定
 GB/T 43128-2023  
General technical specifications for aerospace Thermoplastic polyurethane elastomer interlayer films
航空航天热塑性聚氨酯弹性体中间膜通用技术规范
 GB/T 42918.1-2023  
Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 1: Nomenclature system and basis for classification
塑料 模塑和挤出用热塑性聚氨酯 第1部分：命名系统和分类基础
 GB/T 28712.4-2023  
Heat exchanger types and basic parameters Part 4: Thermosiphon reboiler
热交换器型式与基本参数 第4部分：热虹吸式重沸器
 GB/T 42952.1-2023  
Thermoplastic pipes for fluid conveyance - Dimensions and tolerances - Part 1: Metric series
流体输送用热塑性塑料管材 尺寸和公差 第1部分：公制系列
 GB/T 18034-2023  
Specification for platinum-rhodium fine wire for rapid temperature measurement Thermocouple
快速测温热电偶用铂铑细偶丝规范
 GB/T 39248-2020  
Specification for Thermoplastic multi-layer (non-vulcanized) hose and hose assemblies for conveying liquefied petroleum gas and liquefied natural gas "No. 1 Amendment"
输送液化石油气和液化天然气用热塑性塑料多层（非硫化）软管及软管组合件 规范《第1号修改单》
 GB/T 38216.3-2023  
Steel slag Determination of free calcium oxide content EDTA titration and Thermogravimetric analysis
钢渣 游离氧化钙含量的测定 EDTA滴定和热重分析法
 GB/T 42918.2-2023  
Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination
塑料 模塑和挤出用热塑性聚氨酯 第2部分：试样制备和性能测定
 GB/T 43413-2023  
Non-destructive testing Infrared thermal imaging testing General rules for Thermoelastic stress measurement methods
无损检测 红外热成像检测 热弹性应力测量方法通则
 GB/T 41312.2-2023  
Permeability testing methods for chemical industry equipment Part 2: Fiber reinforced Thermosetting plastic equipment
化工用设备渗透性检测方法 第2部分：纤维增强热固性塑料设备
 GB/T 43308-2023  
Glass fiber reinforced Thermoplastic unidirectional prepreg
玻璃纤维增强热塑性单向预浸料
 GB/T 1303.12-2022  
Industrial rigid laminates of Thermosetting resins for electrical purposes - Part 12: Typical values
电气用热固性树脂工业硬质层压板 第12部分：典型值
 GB/T 41606-2022  
Barium titanate-based Thermosensitive ceramics with high electric strength and low resistivity
钛酸钡基高抗电强度低电阻率热敏陶瓷
 GB/T 18743.2-2022  
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials
热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件
 GB/T 18743.1-2022  
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods
热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法
 GB/T 42122-2022  
Vulcanized rubber or Thermoplastic rubber - Determination of abrasion resistance (modified Lamborn abrasion tester method)
硫化橡胶或热塑性橡胶 耐磨性能的测定（改进型兰伯恩磨耗试验机法）
 GB/T 41927-2022  
Plastics - Thermoset molding compounds - Short-term performance evaluation at elevated temperatures
塑料 热固性模塑料 高温下的短期性能评估
 GB/T 42279-2022  
Vulcanized or Thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile load
硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变
 GB/T 39693.8-2022  
Vulcanized rubber or Thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method
硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度
 GB/T 39693.7-2022  
Vulcanized rubber or Thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method
硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度
 GB/T 18404-2022  
Armored Thermocouple cable and armored thermocouple
铠装热电偶电缆及铠装热电偶
 GB/T 40322-2021  
Thermoplastic elastomer—Specifications of door sealmaterials for household and similar refrigerating appliances
热塑性弹性体 家用和类似用途制冷器具用门密封材料规范
 GB/T 33047.3-2021  
Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学
 GB/T 33047.2-2021  
Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy
塑料 聚合物热重法（TG） 第2部分：活化能的测定
 GB/T 12604.9-2021  
Non-destructive testing—Terminology—Infrared Thermography
无损检测 术语 红外热成像
 GB/T 40120-2021  
Agricultural irrigation equipment—Thermoplastic collapsible hoses for irrigation—Specifications and test methods
农业灌溉设备 灌溉用热塑性可折叠软管 技术规范和试验方法
 GB/T 39997-2021  
Thermoplastic pipework for underground installation at petrol filling stations
加油站埋地用热塑性塑料复合管道系统
 GB/T 39693.3-2021  
Rubber, vulcanized or Thermoplastic—Determination of hardness—Part 3:Dead-load hardness using the very low rubber hardness (VLRH) scale
硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度
 GB/T 39818-2021  
Plastics—Thermosetting moulding materials—Determination of shrinkage
塑料 热固性模塑材料 收缩率的测定
 GB/T 39743-2021  
Plain bearings—Thermoplastic bushes—Dimensions and tolerance
滑动轴承 热塑性塑料轴套 尺寸与公差
 GB/T 41154-2021  
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled Thermo-mechanical fatigue testing method
金属材料 多轴疲劳试验 轴向-扭转应变控制热机械疲劳试验方法
 GB/T 40933-2021  
Plastics—Film and sheeting—Guidance on the testing of Thermoplastic films
塑料制品 薄膜和薄片 热塑性塑料薄膜试验指南
 GB/T 39693.9-2021  
Rubber, vulcanized or Thermoplastic—Determination of hardness—Part 9:Calibration and verification of hardness testers
硫化橡胶或热塑性橡胶 硬度的测定 第9部分：硬度计的校准和验证
 GB/T 40797-2021  
Rubber, vulcanized or Thermoplastic -- Determination of resistance to abrasion -- Driven, vertical abrasive disc method
硫化橡胶或热塑性橡胶 耐磨性能的测定 垂直驱动磨盘法
 GB/T 38883-2020  
Non-destructive testing—Active Thermographic testing method
无损检测 主动式红外热成像检测方法
 GB/T 36014.2-2020  
Industrial process control devices—Radiation Thermometers—Part 2：Determination of the technical data for radiation thermometers
工业过程控制装置 辐射温度计 第2部分：辐射温度计技术参数的确定
 GB/T 4461-2020  
Thermostat metal strip
热双金属带材
 GB/T 38725.2-2020  
Spoolable reinforced plastic pipe一Part 2: Fiber reinforced Thermoplastic coiled pipe
可盘绕式增强塑料管 第2部分：纤维增强热塑性塑料连续管
 GB/T 38693-2020  
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Thermoelectric flame supervision controls
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 热电式熄火保护装置
 GB/T 38595-2020  
Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Mechanical Thermostats
燃气燃烧器和燃烧器具用安全和控制装置 特殊要求 机械式温度控制装置
 GB/T 39695-2020  
Identification of volatile components of rubber fumes—Thermodesorption and gas chromatographic method with mass spectrometric detection
橡胶烟气中挥发性成分的鉴定 热脱附-气相色谱-质谱法
 GB/T 17037.5-2020  
Plastics—Injection moulding of test specimens of Thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备
 GB/T 39692-2020  
Rubber,vulcanized or Thermoplastic—Low temperature testing—General introduction and guide
硫化橡胶或热塑性橡胶 低温试验 概述与指南
 GB/T 39693.6-2020  
Rubber, vulcanized or Thermoplastic—Determination of hardness—Part 6: Apparent hardness of rubber-covered rollers by IRHD method
硫化橡胶或热塑性橡胶 硬度的测定 第6部分：IRHD法测定胶辊的表观硬度
 GB/T 39549-2020  
Fiber reinforced Thermosetting composites septic tank
纤维增强热固性复合材料化粪池

Find out:347Items   |   First -Previous-Next -Last  | 1 2 3 4 5 6 7

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        [email protected] 
© Copyright  2001-2021 All Rights Reserved