China National Standards		 HOME  CONTACT US to PC vesion

'piece'
China GB Standards List

 GB/T 18779.2-2023  
Geometrical Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification
产品几何技术规范(GPS) 工件与测量设备的测量检验 第2部分：GPS测量、测量设备校准和产品验证中的测量不确定度评估指南
 GB/T 18779.3-2023  
Geometric product specification (GPS) Measurement inspection of workpieces and measuring equipment - Part 3: Guidance on reaching consensus on the expression of measurement uncertainty
产品几何技术规范（GPS） 工件与测量设备的测量检验 第3部分：关于测量不确定度表述达成共识的指南
 GB/T 42163.1-2022  
Single-piece cast polyamide pulleys - Part 1: Elevator pulleys
单体浇铸聚酰胺滑轮 第1部分：电梯滑轮
 GB/T 18779.1-2022  
Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 1: Rules for Passing or Failing Verification According to Specifications
产品几何技术规范(GPS) 工件与测量设备的测量检验 第1部分：按规范验证合格或不合格的判定规则
 GB/T 40357-2021  
Hair products—Determination of the permeability of hairpiece to air
发制品 假发透气性的测定
 GB/T 39967-2021  
5-axis simultaneous machining center -- Accuracy of S-shaped test piece
五轴联动加工中心 S形试件精度检验
 GB/T 41155-2021  
Sintered metal materials,excluding hardmetals—Fatigue test pieces
烧结金属材料（不包括硬质合金） 疲劳试样
 GB/T 26703-2021  
Determination of abrasion resistance for top piece of leather shoes
皮鞋跟面耐磨性能试验方法
 GB/T 38769-2020  
Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
金属材料 预裂纹夏比试样冲击加载断裂韧性的测定
 GB/T 34874.6-2020  
Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 6: Testing method of workpieces
产品几何技术规范（GPS） X射线三维尺寸测量机 第6部分：工件的检测方法
 GB/T 31396.3-2020  
Machine tools—Dimensions and geometric tests for self-centring chucks with two-piece jaws—Part 3:Power-operated chucks with serrated jaws
机床 分离爪自定心卡盘尺寸和几何精度检验 第3部分：梳齿配合型动力卡盘
 GB/T 18779.6-2020  
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
产品几何技术规范（GPS） 工件与测量设备的测量检验 第6部分：仪器和工件接受/拒收的通用判定规则
 GB/T 18779.5-2020  
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments
产品几何技术规范（GPS） 工件与测量设备的测量检验 第5部分：指示式测量仪器的检验不确定度
 GB/T 18779.4-2020  
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules
产品几何技术规范（GPS） 工件与测量设备的测量检验 第4部分：判定规则中功能限与规范限的基础
 GB/T 22062-2020  
Microscopes—Graticules for eyepieces
显微镜 目镜分划板
 GB/T 23170-2019  
Hair products—Wigs and hair pieces accessories
发制品 假发头套及头饰
 GB/T 9106.2-2019  
Packaging containers—Two-piece can—Part 2:Aluminum easy open end and steel can
包装容器 两片罐 第2部分：铝易开盖钢罐
 GB/T 9106.1-2019  
Packaging containers—Two-piece can—Part 1:Aluminum easy open end and aluminum can
包装容器 两片罐 第1部分：铝易开盖铝罐
 GB/Z 38434-2019  
Metallic materials—Guide to test pieces preparation for mechanical testing
金属材料 力学性能试验用试样制备指南
 GB/T 17783-2019  
Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece
硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备
 GB/T 17783-2019  
Rubber,vulcanized or thermoplastic—Chemical tests—Preparation of samples and test piece
硫化橡胶或热塑性橡胶 化学试验 样品和试样的制备
 GB/T 22056-2018  
Microscopes—Marking of objectives and eyepieces
显微镜-物镜和目镜的标志
 GB/T 25027-2018  
Structure,main size and basic parameters of two pieces glass-lined steel vessels with agitator
搪玻璃开式搅拌容器型式、主要尺寸及基本参数
 GB/T 2975-2018  
Steel and steel products—Location and preparation of samples and test pieces for mechanical testing
钢及钢产品 力学性能试验取样位置及试样制备
 GB/T 18658-2018  
Charpy V-notch reference test pieces for indirect verification of pendulum impact testing machines
摆锤式冲击试验机间接检验用夏比V型缺口标准试样
 GB/T 36024-2018  
Metallic materials—Sheet and strip—Biaxial tensile testing method using a cruciform test piece
金属材料 薄板和薄带 十字形试样双向拉伸试验方法
 GB/T 4513.5-2017  
Monolithic (unshaped) refractory products—Part5： Preparation and treatment of test pieces
不定形耐火材料 第5部分：试样制备和预处理
 GB/T 5318-2017  
Sintered metal materials（excluding hardmetals） without notch impact test piece
烧结金属材料（不包括硬质合金）无切口冲击试样
 GB/T 25026-2017  
Structure,main size and basic parameters of one piece glass-lined steel vessels with agitator
搪玻璃闭式搅拌容器型式、主要尺寸及基本参数
 GB/T 34634-2017  
Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring instrument
产品几何技术规范(GPS) 光滑工件尺寸(500mm～10000mm)测量 计量器具选择
 GB/T 16462.6-2017  
Test conditions for numerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece
数控车床和车削中心检验条件 第6部分：精加工试件精度检验
 GB 16487.13-2017  
Environmental protection control standard for imported solid wastes as raw materials—compressed piece of scrap automobile
进口可用作原料的固体废物环境保护控制标准—废汽车压件
 GB/T 7963-2015  
Sintered metal materials, excluding hardmetals—Tensile test pieces
烧结金属材料（不包括硬质合金） 拉伸试样
 GB/T 31396.2-2015  
Machine tools—Dimensions and geometric tests for self-centring chucks with two-piece jaws—Part 2: Power-operated chucks with tongue and groove type jaws
机床 分离爪自定心卡盘尺寸和几何精度检验 第2部分：键、槽配合型动力卡盘
 GB/T 31396.1-2015  
Machine tools—Dimensions and geometric tests for self-centring chucks with two-piece jaws—Part 1: Manually operated chucks with tongue and groove type jaws
机床 分离爪自定心卡盘尺寸和几何精度检验 第1部分：键、槽配合型手动卡盘
 GB/T 1682-2014  
Rubber,vulcanized―Determination of low-temperature brittleness―Single test piece method
硫化橡胶 低温脆性的测定 单试样法
 GB/T 15256-2014  
Rubber, vulcanized or thermoplastic―Determination of low-temperature brittleness（multiple test piece method）
硫化橡胶或热塑性橡胶 低温脆性的测定(多试样法)
 GB/T 16865-2013  
Test pieces and method for tensile test for wrought aluminium and magnesium alloys products
变形铝、镁及其合金加工制品拉伸试验用试样及方法
 GB/T 29345-2012  
Packaging containers - Aluminum easy open end and two-piece steel can
包装容器 铝易开盖钢制两片罐
 GB/T 27723-2011  
Test method for torsional strength of top piece attachment
皮鞋跟面扭转强度试验方法
 GB/T 26703-2011  
Determination of abrasion resistance for top piece of leather shoes -Rotation cylindrical drum method
皮鞋跟面耐磨性能试验方法 旋转辊筒式磨耗机法
 GB/T 10051.9-2010  
Lifting hooks - Part 9: Cross pieces
起重吊钩 第9部分：吊钩横梁
 GB/T 10051.8-2010  
Lifting hooks - Part 8: Blanks of cross pieces for hooks
起重吊钩 第8部分：吊钩横梁毛坯件
 GB/T 18400.7-2010  
Test conditions for machining centres - Part 7: Accuracy of a finished test piece
加工中心检验条件 第7部分：精加工试件精度检验
 GB/T 25050-2010  
Ferronickel ingots or pieces - Sampling for analysis
镍铁锭或块 成分分析用样品的采取
 GB/T 25027-2010  
Two pieces glass-lined steel vessels with agitator
搪玻璃开式搅拌容器
 GB/T 25026-2010  
One piece glass-lined steel vessels with agitator
搪玻璃闭式搅拌容器
 GB/T 9106.1-2009  
Packaging containers - Aluminum easy open end and aluminum two - piece can
包装容器 铝易开盖铝两片罐
 GB/T 24635.3-2009  
Geometrical product specifications (GPS) - Coordinate measuring machines(CMM) - Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards
产品几何技术规范（GPS) 坐标测量机（CMM） 确定测量不确定度的技术 第3部分：应用已校准工件或标准件
 GB/T 12626.3-2009  
Hard fibreboard - Part 3: Sampling and measurements of test pieces
湿法硬质纤维板 第3部分：试件取样及测量

Find out:80Items   |   First -Previous-Next -Last  | 1 2

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        [email protected] 
© Copyright  2001-2021 All Rights Reserved