Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 13254-2008 |
Caprolactam for inDustrial use 工业用己内酰胺 |
China National Standards D |
 English PDF |
| GB/T 13248-2008 |
Rubber anD rubber latices - Determination of manganese content - Sodium periodate photometric methodes 橡胶和胶乳 锰含量的测定 高碘酸钠光度法 |
China National Standards D |
English PDF |
| GB/T 12830-2008 |
Rubber，vulcanizeD or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法 |
China National Standards D |
English PDF |
| GB/T 11501-2008 |
Photography - Density Measurement - Part 3：Spectral Conditions 摄影 密度测量 第3部分：光谱条件 |
China National Standards D |
English PDF |
| GB/T 10707-2008 |
Rubber - Determination of the burning 橡胶燃烧性能的测定 |
China National Standards D |
English PDF |
| GB/T 972-2008 |
ThreaD rolling flat dies 搓丝板 |
China National Standards D |
English PDF |
| GB/T 971-2008 |
threaD rolling cylindrical dies 滚丝轮 |
China National Standards D |
English PDF |
| GB/T 970.2-2008 |
Circular screwing Dies - Part 2: Technical specifications 圆板牙 第2部分：技术条件 |
China National Standards D |
English PDF |
| GB/T 970.1-2008 |
Circular screwing Dies - Part 1: The types and dimensions for circular screwing dies and die stocks 圆板牙 第1部分：圆板牙和圆板牙架的型式和尺寸 |
China National Standards D |
English PDF |
| GB/T 9487-2008 |
Diesel engines - Exhaust gas measurement under free acceleration 柴油机自由加速排气烟度的测量方法 |
China National Standards D |
English PDF |
| GB/T 9258.2-2008 |
CoateD abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 涂附磨具用磨料 粒度分析 第2部分：粗磨粒P12～P220粒度组成的测定 |
China National Standards D |
English PDF |
| GB/T 8498-2008 |
Earth-moving machinery - Basic type - IDentification and terms and definitions 土方机械 基本类型 识别、术语和定义 |
China National Standards D |
English PDF |
| GB/T 725-2008 |
Internal combustion engines - Nomenclature anD code of designations 内燃机产品名称和型号编制规则 |
China National Standards D |
English PDF |
| GB/T 7121.1-2008 |
The strength testing methoD and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分：后置式静态试验方法 |
China National Standards D |
English PDF |
| GB/T 5862-2008 |
Agricultural tractors anD machinery - General purpose quick-action hydraulic couplers 农业拖拉机和机具 通用液压快换接头 |
China National Standards D |
English PDF |
| GB/T 5669-2008 |
Rotary tiller - Rotary blaDes and blade holders 旋耕机械 刀和刀座 |
China National Standards D |
English PDF |
| GB/T 5667-2008 |
ProDuctive testing methods for agricultural machinery 农业机械 生产试验方法 |
China National Standards D |
English PDF |
| GB/T 5262-2008 |
Agricultural machinery testing conDitions-general rules for measuring methods 农业机械 试验条件测定方法的一般规定 |
China National Standards D |
English PDF |
| GB/T 4346-2008 |
Machine tools - Manually operateD self-centring chucks 机床 手动自定心卡盘 |
China National Standards D |
English PDF |
| GB/T 4127.7-2008 |
BonDed abrasive products - Dimensions - Part 7: Grinding wheels for manually guided grinding 固结磨具 尺寸 第7部分：人工操纵磨削砂轮 |
China National Standards D |
English PDF |
| GB/T 4127.6-2008 |
BonDed abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding 固结磨具 尺寸 第6部分：工具磨和工具室用砂轮 |
China National Standards D |
English PDF |
| GB/T 4127.5-2008 |
BonDed abrasive products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding 固结磨具 尺寸 第5部分：平面磨削用端面磨砂轮 |
China National Standards D |
English PDF |
| GB/T 4127.4-2008 |
BonDed abrasive products - Dimensions - Part 4: Grinding wheels for suface grinding/peripheral grinding 固结磨具 尺寸 第4部分：平面磨削用周边磨砂轮 |
China National Standards D |
English PDF |
| GB/T 4127.14-2008 |
BonDed abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder 固结磨具 尺寸 第14部分：角向砂轮机用去毛刺、荒磨和粗磨砂轮 |
China National Standards D |
English PDF |
| GB/T 4127.13-2008 |
BonDed abrasive products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder 固结磨具 尺寸 第13部分：立式砂轮机用去毛刺和荒磨砂轮 |
China National Standards D |
English PDF |
| GB/T 4127.12-2008 |
BonDed abrasive products - Dimensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder 固结磨具 尺寸 第12部分：直向砂轮机用去毛刺和荒磨砂轮 |
China National Standards D |
English PDF |
| GB/T 4127.11-2008 |
BonDed abrasive products - Dimensions - Part 11：Hand finishing sticks 固结磨具 尺寸 第11部分：手持抛光磨石 |
China National Standards D |
English PDF |
| GB/T 4127.10-2008 |
BonDed abrasive products - Dimensions - Part 10: Stones for honing and superfinishings 固结磨具 尺寸 第10部分：珩磨和超精磨磨石 |
China National Standards D |
English PDF |
| GB/T 2554-2008 |
Mechanical Dividing heads 机械分度头 |
China National Standards D |
English PDF |
| GB/T 2485-2008 |
BonDed abrasive products - Technical specifications 固结磨具 技术条件 |
China National Standards D |
English PDF |
| GB/T 2480-2008 |
Conventional abrasive - Silicon carbiDe 普通磨料 碳化硅 |
China National Standards D |
English PDF |
| GB/T 2479-2008 |
Conventional abrasive - White fuseD alumina 普通磨料 白刚玉 |
China National Standards D |
English PDF |
| GB/T 2478-2008 |
Conventional abrasive - Brown fuseD alumina 普通磨料 棕刚玉 |
China National Standards D |
English PDF |
| GB/T 21960-2008 |
The testing methoD and accepting condition of the driver’s seat on agricultural and forestry tractors 农林拖拉机驾驶座试验方法和验收条件 |
China National Standards D |
English PDF |
| GB/T 21958-2008 |
Front Drive axle for wheeled tractor 轮式拖拉机 前驱动桥 |
China National Standards D |
English PDF |
| GB/T 21957-2008 |
The fatigue-life testing methoD of the axle shaft and drive shaft on the test stand，wheeled agricultural tractor 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法 |
China National Standards D |
English PDF |
| GB/T 21956.3-2008 |
The strength testing methoD and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3：Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分：后置式静态试验方法 |
China National Standards D |
English PDF |
| GB/T 21956.2-2008 |
The strength testing methoD and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2：Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分：前置式动态试验方法 |
China National Standards D |
English PDF |
| GB/T 21956.1-2008 |
The strength testing methoD and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1：Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分：前置式静态试验方法 |
China National Standards D |
English PDF |
| GB/T 21955-2008 |
Tractors anD machinery for agriculture and forestry - Paper friction disc - Technical specifications 农林拖拉机和机械 纸基摩擦片 技术条件 |
China National Standards D |
English PDF |
| GB/T 21954.2-2008 |
Metal cutting banD saw blades - Part 2：Characteristics and dimensions 金属切割带锯条 第2部分：特性和尺寸 |
China National Standards D |
English PDF |
| GB/T 21954.1-2008 |
Metal cutting banD saw blades - Part 1：Terms 金属切割带锯条 第1部分：术语 |
China National Standards D |
English PDF |
| GB/T 21953-2008 |
Single point cutting tool - Corner raDii 单刃刀具 刀尖圆弧半径 |
China National Standards D |
English PDF |
| GB/T 21952-2008 |
Polycrystalline Diamond inserts,tipped - Dimensions 镶聚晶金刚石刀片 尺寸 |
China National Standards D |
English PDF |
| GB/T 21951-2008 |
Cubic boron nitriDe inserts,tipped or solid - Dimensions 镶或整体立方氮化硼刀片 尺寸 |
China National Standards D |
English PDF |
| GB/T 21948.2-2008 |
Test conDitions for CNC milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分：立式铣床 |
China National Standards D |
English PDF |
| GB/T 21948.1-2008 |
Test conDitions for CNC milling machines with table of variable height - Testing of accuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分：卧式铣床 |
China National Standards D |
English PDF |
| GB/T 21944.3-2008 |
Special proDucts of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 3：Rollers 碳化硅特种制品 反应烧结碳化硅窑具 第3部分：辊棒 |
China National Standards D |
English PDF |
| GB/T 21944.1-2008 |
Special proDucts of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 1：Beam 碳化硅特种制品 反应烧结碳化硅窑具 第1部分：方梁 |
China National Standards D |
English PDF |
| GB/T 21943-2008 |
Back-up paDs for vulcanized fibre discs 钢纸砂盘支撑托盘 |
China National Standards D |
English PDF |
| GB/T 21942-2008 |
Earth-moving machinery - LoaDer and front loading excavator buckets - Volumetric ratings 土方机械 装载机和正铲挖掘机的铲斗 容量标定 |
China National Standards D |
English PDF |
| GB/T 21941-2008 |
Earth-moving machinery - Volumetric ratings for hoe-type anD grab-type buckets of hydraulic excavators and backhoe loaders 土方机械 液压挖掘机和挖掘装载机的反铲斗和抓铲斗 容量标定 |
China National Standards D |
English PDF |
| GB/T 21940-2008 |
Earth-moving machinery - Cutting eDges used on tractor-dozers, graders and scrapers - Principal shapes and basic dimensions 土方机械 推土机、平地机和铲运机用刀片 主要形状和基本尺寸 |
China National Standards D |
English PDF |
| GB/T 21939-2008 |
Earth-moving machinery - Warning Devices for slow-moving machines - Ultrasonic and other systems 土方机械 低速机器报警装置 超声波及其它系统 |
China National Standards D |
English PDF |
| GB/T 21938-2008 |
Earth-moving machinery - HyDraulic excavator and backhoe loader boom-lowering control device - Requirements and tests 土方机械 液压挖掘机和挖掘装载机动臂下降控制装置 要求和试验 |
China National Standards D |
English PDF |
| GB/T 21937-2008 |
Earth-moving machinery - Crawler anD wheel tractor dozer blades - Volumetric ratings 土方机械 履带式和轮胎式推土机的推土铲 容量标定 |
China National Standards D |
English PDF |
| GB/T 21936-2008 |
Earth-moving machinery - Machine-mounteD retrieval device - Performance requirements 土方机械 安装在机器上的拖拽装置 性能要求 |
China National Standards D |
English PDF |
| GB/T 21935-2008 |
Earth-moving machinery - Zones of comfort anD reach for controls 土方机械 操纵的舒适区域与可及范围 |
China National Standards D |
English PDF |
| GB/T 21899-2008 |
Mowing anD flattening machine 割草压扁机 |
China National Standards D |
English PDF |
| GB/T 19073-2008 |
Gearbox of winD turbine generator systems 风力发电机组 齿轮箱 |
China National Standards D |
English PDF |
| GB/T 17997-2008 |
Evaluating regulations for the operation anD Spraying quality of sprayers in the field 农药喷雾机（器）田间操作规程及喷洒质量评定 |
China National Standards D |
English PDF |
| GB/T 17587.5-2008 |
Ball screws - Part 5: Static anD dynamic load ratings and operational life 滚珠丝杠副 第5部分：轴向额定静载荷和动载荷及使用寿命 |
China National Standards D |
English PDF |
| GB/T 17587.4-2008 |
Ball screws - Part 4: Static axial rigiDity 滚珠丝杠副 第4部分：轴向静刚度 |
China National Standards D |
English PDF |
| GB/T 17111-2008 |
Cutting tool - Designation of high-speed steel groups 切削刀具 高速钢分组代号 |
China National Standards D |
English PDF |
| GB/T 16770.2-2008 |
SoliD hardmetal end mills with parallel shank - Part 2: Technical specifications 整体硬质合金直柄立铣刀 第2部分：技术条件 |
China National Standards D |
English PDF |
| GB/T 16770.1-2008 |
SoliD hardmetal end mills with parallel shank - Part 1: Dimensions 整体硬质合金直柄立铣刀 第1部分：型式与尺寸 |
China National Standards D |
English PDF |
| GB/T 16456.4-2008 |
EnD mills with brazed helical hardmetal tips - Part 4：Technical specifications 硬质合金螺旋齿立铣刀 第4部分：技术条件 |
China National Standards D |
English PDF |
| GB/T 16456.3-2008 |
EnD mills with brazed helical hardmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分：莫氏锥柄立铣刀 型式和尺寸 |
China National Standards D |
English PDF |
| GB/T 16456.2-2008 |
EnD mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分：7:24 锥柄立铣刀 型式和尺寸 |
China National Standards D |
English PDF |
| GB/T 16456.1-2008 |
EnD mills with brazed helical hardmetal tips - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分：直柄立铣刀 型式和尺寸 |
China National Standards D |
English PDF |
| GB/T 15371-2008 |
Torsional vibration of crankshaft system - Measurement anD evaluation method 曲轴轴系扭转振动的测量与评定方法 |
China National Standards D |
English PDF |
| GB/T 15307-2008 |
Drills with Indexable inserts - Cylindrical shanks with a parallel flat 可转位钻头用削平直柄 |
China National Standards D |
English PDF |
| GB/T 15306.4-2008 |
InDexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 4：Specifications 陶瓷可转位刀片 第4部分：技术条件 |
China National Standards D |
English PDF |
| GB/T 15306.3-2008 |
InDexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U) 陶瓷可转位刀片 第3部分：无孔刀片尺寸（U级） |
China National Standards D |
English PDF |
| GB/T 15306.2-2008 |
InDexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 2: Dimensions of inserts with cylindrical fixing hole 陶瓷可转位刀片 第2部分：带孔刀片尺寸 |
China National Standards D |
English PDF |
| GB/T 15306.1-2008 |
InDexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1: Dimensions of inserts without fixing hole(Class G) 陶瓷可转位刀片 第1部分：无孔刀片尺寸（G级） |
China National Standards D |
English PDF |
| GB/T 15305.2-2008 |
CoateD abrasives - Abrasive rolls 涂附磨具 砂卷 |
China National Standards D |
English PDF |
| GB/T 14328-2008 |
Roughing enD mill 粗加工立铣刀 |
China National Standards D |
English PDF |
| GB/T 14321-2008 |
Testing methoD for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer 刚玉磨料中α-Al2O3相X射线定量测定方法 |
China National Standards D |
English PDF |
| GB/T 14319-2008 |
BonDed abrasive products - Vitrified stones for force-honing and superfinishing 固结磨具 陶瓷结合剂强力珩磨磨石与超精磨磨石 |
China National Standards D |
English PDF |
| GB/T 14298-2008 |
Helical enD mills with indexable inserts 可转位螺旋立铣刀 |
China National Standards D |
English PDF |
| GB/T 14225-2008 |
MoulDboard plough 铧式犁 |
China National Standards D |
English PDF |
| GB/T 10168-2008 |
Earth-moving machinery - Backhoe loaDers - Definitions and commercial specifications 土方机械 挖掘装载机 术语和商业规格 |
China National Standards D |
English PDF |
| GB 50431-2008 |
CoDe for design of belt conveyor engineering 带式输送机工程设计规范 |
China National Standards D |
English PDF |
| GB/T 7320-2008 |
Refractories - Determination of thermal expansion 耐火材料 热膨胀试验方法 |
China National Standards D |
English PDF |
| GB/T 5989-2008 |
Refractory proDucts - Determination of refractoriness-under-load - Differential method with rising temperature 耐火材料 荷重软化温度试验方法 示差升温法 |
China National Standards D |
English PDF |
| GB/T 21928-2008 |
Determination of phthalate esters in food plastic packaging materials 食品塑料包装材料中邻苯二甲酸酯的测定 |
China National Standards D |
English PDF |
| GB/T 19691-2008 |
ProDuct of geographical indication - Gougunao tea 地理标志产品 狗牯脑茶 |
China National Standards D |
English PDF |
| GB/T 19460-2008 |
ProDuct of geographical indication - Huangshan maofeng tea 地理标志产品 黄山毛峰茶 |
China National Standards D |
English PDF |
| GB/T 19051-2008 |
ProDuct of geographical indication - Nanfeng mandarin 地理标志产品 南丰蜜桔 |
China National Standards D |
English PDF |
| GB/T 19048-2008 |
ProDuct of geographical indication - Longkou vermicelli 地理标志产品 龙口粉丝 |
China National Standards D |
English PDF |
| GB/T 18846-2008 |
ProDuct of geographical indication - Zhanhua brumal jujube 地理标志产品 沾化冬枣 |
China National Standards D |
English PDF |
| GB/T 17732-2008 |
Dense，shaped refractory products - Test methods for products containing carbon 致密定形含碳耐火制品试验方法 |
China National Standards D |
English PDF |
| GB/T 14983-2008 |
Refractory proDucts - Determination of alkali-resistance 耐火材料 抗碱性试验方法 |
China National Standards D |
English PDF |
| GB/T 10646-2008 |
Electric heating fooD ovens - Types and principal parameters 电热食品烤炉型式与主要参数 |
China National Standards D |
English PDF |
| GB/T 10645-2008 |
Electric heating fooD ovens - Method of draw up model 电热食品烤炉型号编制方法 |
China National Standards D |
English PDF |
| GB/T 10644-2008 |
Electric heating fooD ovens 电热食品烤炉 |
China National Standards D |
English PDF |
| GB/T 22023-2008 |
Acceptance specification of ultra high temperature sterilizing equipment for liquiD food 液体食品超高温瞬时灭菌(UHT)设备验收规范 |
China National Standards D |
English PDF |
| GB/T 21987-2008 |
GraDes of cold wave 寒潮等级 |
China National Standards D |
English PDF |
| GB/T 21986-2008 |
Assessment of agroclimate impact: classfication methoD of annual crop climate types 农业气候影响评价：农作物气候年型划分方法 |
China National Standards D |
English PDF |
| Find out:48536Items | To Page of: First -Previous-Next -Last | [358] [359] [360] [361] [362] [363] [364] |
+86-755-25831330
