GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 1242-2000 |
Dimensions for panel mounted indicating and recording electrical measuring instruments 安装式指示和记录电测量仪表的尺寸 |
China National Standards D |
English PDF |
GB/T 12199-2000 |
Environmental testing requirements anD methods for non-broadcast video tape recorders 非广播盒式磁带录像机环境要求和试验方法 |
China National Standards D |
English PDF |
GB/T 4639-2000 |
Cinematography--Monophonic 35mm negative photographic sounD record on 35 mm motion-picture film--Position and maximum width dimensions 35mm单声道电影光学声底片上声迹的位置和最大宽度尺寸 |
China National Standards D |
English PDF |
GB/T 4636-2000 |
Maximum projectable image area on35mm motion-picture film--Position anD dimensions 35mm影片上最大可放映画面的位置和尺寸 |
China National Standards D |
English PDF |
GB/T 4635-2000 |
Image area proDuced by camera aperture on 35mm motion-picture film--Position and dimensions 35mm电影摄影机片窗在胶片上形成的画面的位置和尺寸 |
China National Standards D |
English PDF |
GB/T 2926-2000 |
LeaDers and run-out trailers for 35mm and 16mm release prints--Specification 35mm和16mm电影发行拷贝片头和片尾的技术规格 |
China National Standards D |
English PDF |
GB/T 18212-2000 |
Calculation of maximum external Diameter of cables for indoor installations 户内装置用电缆最大外径的计算 |
China National Standards D |
English PDF |
GB/T 18201-2000 |
List for raDiation induced diseases 放射性疾病名单 |
China National Standards D |
English PDF |
GB/T 18200-2000 |
Report form anD contents for radiation induced occupational diseases 职业性放射性疾病报告格式与内容 |
China National Standards D |
English PDF |
GB/T 18199-2000 |
MeDical management and treatment programme for personnel exposed to accidental external irradiation 外照射事故受照人员的医学处理和治疗方案 |
China National Standards D |
English PDF |
GB/T 18198-2000 |
Estimation stanDards of personal cumulative exposure to radon decay products for miners 矿工氡子体个人累积暴露量估算规范 |
China National Standards D |
English PDF |
GB/T 18197-2000 |
MeDical management standard for internal contamination of radionuclides 放射性核素内污染人员医学处理规范 |
China National Standards D |
English PDF |
GB 8282-2000 |
Diagnostic criteria and principles ofmanagement for radiation skin diseases 放射性皮肤疾病诊断标准及处理原则 |
China National Standards D |
English PDF |
GB 8281-2000 |
Diagnostic criteria and principles of management for chronic radiation sickness from external exposure 外照射慢性放射病诊断标准及处理原则 |
China National Standards D |
English PDF |
GB 8280-2000 |
Diagnostic criteria and principles of management for acute radiation sickness from external exposure 外照射急性放射病诊断标准及处理原则 |
China National Standards D |
English PDF |
GB 18196-2000 |
Specifications of the meDical examinations for the overexposed individuals 过量受照人员的医学检查规范 |
China National Standards D |
English PDF |
GB 16852.6-2000 |
Diagnosis of occupational acute chemicals poisoning--Part 6:Diagnostic criteria of occupational acute toxic pulmonopathy 职业性急性化学物中毒的诊断 第6部分:职业性急性化学物中毒性呼吸系统疾病的诊断 |
China National Standards D |
English PDF |
GB/T 18204.9-2000 |
MethoDs of microbiological examination for water in swimming pool--Determination of aerobic bacterial count 游泳池水微生物检验方法 细菌总数测定 |
China National Standards D |
English PDF |
GB/T 18204.10-2000 |
MethoDs of microbiological examination for water in swimming pool--Determination of Coliform bacteria 游泳池水微生物检验方法 大肠菌群测定 |
China National Standards D |
English PDF |
GB/T 18203-2000 |
Hygienic stanDard for Streptococcus hemolyticus in indoor air 室内空气中溶血性链球菌卫生标准 |
China National Standards D |
English PDF |
GB/T 18202-2000 |
Hygienic stanDard for ozone in indoor air 室内空气中臭氧卫生标准 |
China National Standards D |
English PDF |
GB/T 12783-2000 |
EDitorial nominating method for the modeldesignation of rubber and plastics machinery 橡胶塑料机械产品型号编制方法 |
China National Standards D |
English PDF |
GB/T 889.2-2000 |
Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch threaD 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards D |
English PDF |
GB/T 881-2000 |
Taper pins with external threaD 螺尾锥销 |
China National Standards D |
English PDF |
GB/T 879.5-2000 |
Spring-type straight pins--CoileD,light duty 弹性圆柱销 卷制 轻型 |
China National Standards D |
English PDF |
GB/T 879.4-2000 |
Spring-type straight pins--CoileD,standard duty 弹性圆柱销 卷制 标准型 |
China National Standards D |
English PDF |
GB/T 879.3-2000 |
Spring-type straight pins--CoileD,heavy duty 弹性圆柱销 卷制 重型 |
China National Standards D |
English PDF |
GB/T 879.2-2000 |
Spring-type straight pins--SlotteD,light duty 弹性圆柱销 直槽 轻型 |
China National Standards D |
English PDF |
GB/T 879.1-2000 |
Spring-type straight pins--SlotteD,heavy duty 弹性圆柱销 直槽 重型 |
China National Standards D |
English PDF |
GB/T 822-2000 |
Cheese heaD screws with cross recess 十字槽圆柱头螺钉 |
China National Standards D |
English PDF |
GB/T 819.1-2000 |
Countersunk flat heaD screws(common head style)with cross recess--Part 1:Steel of property class 4.8 十字槽沉头螺钉 第1部分:钢4.8级 |
China National Standards D |
English PDF |
GB/T 818-2000 |
Pan heaD screws with cross recess 十字槽盘头螺钉 |
China National Standards D |
English PDF |
GB/T 69-2000 |
Countersunk slotteD raised head screws(common head style) 开槽半沉头螺钉 |
China National Standards D |
English PDF |
GB/T 65-2000 |
SlotteD cheese head screws 开槽圆柱头螺钉 |
China National Standards D |
English PDF |
GB/T 6187.2-2000 |
Prevailing torque type all-metal hexagon nuts with flange with fine pitch threaD 全金属六角法兰面锁紧螺母 细牙 |
China National Standards D |
English PDF |
GB/T 6185.2-2000 |
Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch threaD 2型全金属六角锁紧螺母 细牙 |
China National Standards D |
English PDF |
GB/T 6183.2-2000 |
Prevailing torque type hexagon nutswith flange(with non-metallic insert) with fine pitch threaD 非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards D |
English PDF |
GB/T 6177.2-2000 |
Hexagon nuts with flange--Fine pitch threaD 六角法兰面螺母 细牙 |
China National Standards D |
English PDF |
GB/T 6176-2000 |
Hexagon nuts,style 2,with fine pitch threaD 2型六角螺母 细牙 |
China National Standards D |
English PDF |
GB/T 6174-2000 |
Hexagon thin nuts(unchamfereD) 六角薄螺母 无倒角 |
China National Standards D |
English PDF |
GB/T 6172.1-2000 |
Hexagon thin nuts(chamfereD) 六角薄螺母 |
China National Standards D |
English PDF |
GB/T 6171-2000 |
Hexagon nuts,style 1,with fine pitch threaD 1型六角螺母 细牙 |
China National Standards D |
English PDF |
GB/T 5786-2000 |
Hexagon heaD bolts with fine pitch thread--Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards D |
English PDF |
GB/T 5785-2000 |
Hexagon heaD bolts with fine pitch thread 六角头螺栓 细牙 |
China National Standards D |
English PDF |
GB/T 5783-2000 |
Hexagon heaD bolts--Full thread 六角头螺栓 全螺纹 |
China National Standards D |
English PDF |
GB/T 5782-2000 |
Hexagon heaD bolts 六角头螺栓 |
China National Standards D |
English PDF |
GB/T 5781-2000 |
Hexagon heaD bolts--Full thread--Product gradeC 六角头螺栓 全螺纹 C级 |
China National Standards D |
English PDF |
GB/T 5780-2000 |
Hexagon heaD bolts--Product grade C 六角头螺栓 C级 |
China National Standards D |
English PDF |
GB/T 5779.3-2000 |
Fasteners--Surface Discontinuities--Bolts,screws and studs for special requirements 紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求 |
China National Standards D |
English PDF |
GB/T 5779.2-2000 |
Fasteners--Surface Discontinuities--Nuts 紧固件表面缺陷 螺母 |
China National Standards D |
English PDF |
GB/T 5779.1-2000 |
Fasteners--Surface Discontinuities--Bolts,screws and studs for general requirements 紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求 |
China National Standards D |
English PDF |
GB/T 41-2000 |
Hexagon nuts--ProDuct grade C 六角螺母 C级 |
China National Standards D |
English PDF |
GB/T 68-2000 |
SlotteD countersunk flat head screws(common head style) 开槽沉头螺钉 |
China National Standards D |
English PDF |
GB/T 3098.7-2000 |
Mechanical properties of fasteners--ThreaD rolling screws 紧固件机械性能 自挤螺钉 |
China National Standards D |
English PDF |
GB/T 3098.4-2000 |
Mechanical properties of fasteners--Nuts--Fine pitch threaD 紧固件机械性能 螺母 细牙螺纹 |
China National Standards D |
English PDF |
GB/T 3098.2-2000 |
Mechanical properties of fasteners--Nuts--Coarse threaD 紧固件机械性能 螺母 粗牙螺纹 |
China National Standards D |
English PDF |
GB/T 3098.17-2000 |
Mechanical properties of fasteners--PreloaDing test for the detection of hydrogen embrittlement--Parallel bearing surface method 紧固件机械性能 检查氢脆用预载荷试验 平行支承面法 |
China National Standards D |
English PDF |
GB/T 3098.14-2000 |
Mechanical properties of fasteners--WiDening test on nuts 紧固件机械性能 螺母扩孔试验 |
China National Standards D |
English PDF |
GB/T 18194-2000 |
Rivet shank Diameters 铆钉杆径 |
China National Standards D |
English PDF |
GB/T 18193-2000 |
Vacuum technology--Mass-spectrometer-type leak Detector calibration 真空技术 质谱检漏仪校准 |
China National Standards D |
English PDF |
GB/T 1237-2000 |
Designation system for fasteners 紧固件标记方法 |
China National Standards D |
English PDF |
GB/T 1236-2000 |
InDustrial fans--Performance testing using standardized airways 工业通风机 用标准化风道进行性能试验 |
China National Standards D |
English PDF |
GB/T 120.2-2000 |
Parallel pins with internal threaD,of hardened steel and martensitic stainless steel 内螺纹圆柱销 淬硬钢和马氏体不锈钢 |
China National Standards D |
English PDF |
GB/T 120.1-2000 |
Parallel pins with internal threaD,of unhardened steel and austenitic stainless steel 内螺纹圆柱销 不淬硬钢和奥氏体不锈钢 |
China National Standards D |
English PDF |
GB/T 119.2-2000 |
Parallel pins,of harDened steel and martensitic stainless steel(Dowel pins) 圆柱销 淬硬钢和马氏体不锈钢 |
China National Standards D |
English PDF |
GB/T 119.1-2000 |
Parallel pins,of unharDened steel and austenitic stainless steel 圆柱销 不淬硬钢和奥氏体不锈钢 |
China National Standards D |
English PDF |
GB/T 118-2000 |
Taper pins with internal threaD 内螺纹圆锥销 |
China National Standards D |
English PDF |
GB 50316-2000 |
Design code for industrial metallic piping 工业金属管道设计规范(2008年版) |
China National Standards D |
English PDF |
GB 18188.2-2000 |
Oil spill Dispersant--Application criteria 溢油分散剂 使用准则 |
China National Standards D |
English PDF |
GB 18188.1-2000 |
Oil spill Dispersant--Technical regulations 溢油分散剂 技术条件 |
China National Standards D |
English PDF |
GB 18187-2000 |
FermenteD vinegar 酿造食醋 |
China National Standards D |
English PDF |
GB 18186-2000 |
FermenteD soy sauce 酿造酱油 |
China National Standards D |
English PDF |
GB/T 4595-2000 |
Measurement of noise on boarD vessels 船上噪声测量 |
China National Standards D |
English PDF |
GB/T 4273-2000 |
Terminololgy of integrateD barge 分节驳术语 |
China National Standards D |
English PDF |
GB/T 18183-2000 |
Automotive synchronous belt inDustry--Fatigue test 汽车同步带疲劳试验方法 |
China National Standards D |
English PDF |
GB/T 10708.3-2000 |
Reciprocating rubber seals--Types,Dimensions and tolerances--Part 3:Rubber dust seals 往复运动橡胶密封圈结构尺寸系列 第3部分:橡胶防尘密封圈 |
China National Standards D |
English PDF |
GB/T 10708.2-2000 |
Reciprocating rubber seals--Types,Dimensions and tolerances--Part 2:Rubber seals on two-way 往复运动橡胶密封圈结构尺寸系列 第2部分:双向密封橡胶密封圈 |
China National Standards D |
English PDF |
GB/T 10708.1-2000 |
Reciprocating rubber seals--Types,Dimensions and tolerances--Part 1:Rubber seals on one-way 往复运动橡胶密封圈结构尺寸系列 第1部分:单向密封橡胶密封圈 |
China National Standards D |
English PDF |
GB/T 18179-2000 |
Metallic coatings--Porosity tests--HumiD sulfur(flowers of sulfur) test 金属覆盖层 孔隙率试验 潮湿硫(硫华)试验 |
China National Standards D |
English PDF |
GB/T 7127.2-2000 |
Brake hose assemblies for hyDraulic braking systems of road vehicles used with petroleum-base brake fluid 使用石油基制动液的道路车辆 液压制动系统用制动软管组合件 |
China National Standards D |
English PDF |
GB/T 7127.1-2000 |
Brake hose assemblies for hyDraulic braking systems of road vehicles used with non-petroleum-base brake fluid 使用非石油基制动液的道路车辆 液压制动系统用制动软管组合件 |
China National Standards D |
English PDF |
GB/T 3600-2000 |
Fertilizers--Determination of ammoniacal nitrogen content--Formaldehyde method 肥料中氨态氮含量的测定 甲醛法 |
China National Standards D |
English PDF |
GB/T 3595-2000 |
Fertilizers--Determination of ammoniacal nitrogen content--Titrimetric method after distillation 肥料中氨态氮含量的测定 蒸馏后滴定法 |
China National Standards D |
English PDF |
GB/T 3051-2000 |
Inorganic chemical proDucts for industrial use--General method for determination of chloride content--Mercurimetric method 无机化工产品中氯化物含量测定的通用方法 汞量法 |
China National Standards D |
English PDF |
GB/T 3050-2000 |
Inorganic chemical proDucts for industrial use--General method for determination of chloride content--Potentiometric method 无机化工产品中氯化物含量测定的通用方法 电位滴定法 |
China National Standards D |
English PDF |
GB/T 2659-2000 |
CoDes for the representation of names of countries and regions 世界各国和地区名称代码 |
China National Standards D |
English PDF |
GB/T 2305-2000 |
Chemical reagent--Phosphorus(V) oxiDe 化学试剂 五氧化二磷 |
China National Standards D |
English PDF |
GB/T 1633-2000 |
Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST) 热塑性塑料维卡软化温度(VST)的测定 |
China National Standards D |
English PDF |
GB/T 1587-2000 |
Potassium carbonate for inDustrial use 工业碳酸钾 |
China National Standards D |
English PDF |
GB/T 1232.1-2000 |
Rubber,unvulcanizeD--Determinations using a shearing-disc viscometer--Part 1:Determination of Mooney viscosity 未硫化橡胶 用圆盘剪切粘度计进行测定 第1部分:门尼粘度的测定 |
China National Standards D |
English PDF |
GB 4838-2000 |
Packaging for emulsifiable concentrates of pesticiDes 农药乳油包装 |
China National Standards D |
English PDF |
GB 18172.1-2000 |
Chlorothalonil smoke powDer--Granualars 百菌清烟粉粒剂 |
China National Standards D |
English PDF |
GB/T 18142-2000 |
Information technology--Notation of format for Data element values 信息技术 数据元素值格式记法 |
China National Standards D |
English PDF |
GB/T 7306.2-2000 |
Pipe threaDs with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹 |
China National Standards D |
English PDF |
GB/T 7306.1-2000 |
Pipe threaDs with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads 55°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹 |
China National Standards D |
English PDF |
GB/T 4459.3-2000 |
Mechanical Drawings--Representation of splines 机械制图 花键表示法 |
China National Standards D |
English PDF |
GB/T 18149-2000 |
Centrifugal,mixeD flow and axial pumps--Code for hydraulic performance tests--Precision class 离心泵、混流泵和轴流泵 水力性能试验规范 精密级 |
China National Standards D |
English PDF |
GB/T 18148-2000 |
Testing methoD of the compaction performance of rollers and compactors 压实机械压实性能试验方法 |
China National Standards D |
English PDF |
GB/T 18146.1-2000 |
Hemp fibre--Part 1:Raw white Degummed hemp 大麻纤维 第1部分:大麻精麻 |
China National Standards D |
English PDF |
GB/T 1804-2000 |
General tolerances--Tolerances for linear anD angular dimensions without individual tolerance indications 一般公差 未注公差的线性和角度尺寸的公差 |
China National Standards D |
English PDF |
Find out:48536Items | To Page of: First -Previous-Next -Last | [435] [436] [437] [438] [439] [440] [441] |